INNVENTIA TESTING SERVICES
FTIR spectroscopy
FTIR (Fourier Transform InfraRed) spectroscopy is an important tool in material analysis. At
Innventia, apart from the standard set-ups, we have also two advanced spectroscopic
techniques; dynamic FTIR spectroscopy and imaging FTIR spectroscopy. Innventia has a long
experience of analysing material properties with FTIR spectroscopy. Also, there is a reference
database of spectra of various materials as a helping tool for the material identification.
What can we do for you?
Innventia offers extensive characterisation
possibilities, e.g.:
chemical composition
analysis of product defects
identification of impurities
local chemical composition
relative content and distribution, location or
homogeneity of different components
chemical variations along a sample
molecular interactions
viscoelastic properties.
A broad range of materials can be analysed,
for instance:
complex polymeric materials
single fibres
wood
pulp
paper
films
composite materials
packaging materials,
Varian 680-IR, FTIR Spectrometer
where:
bulk
surfaces
layered structures
of mentioned materials can be analysed separately.
A list of set-up possibilities related to FTIR
spectroscopy is appended.
Please contact us for a discussion about how we may
help you!
INNVENTIA AB
Box 5604, SE-114 86 Stockholm, Sweden
Tel +46 8 676 70 00, Fax +46 8 411 55 18
[email protected]
www.innventia.com
PerkinElmer Spotlight 400, FTIR Imaging System and
PerkinElmer Spectrum 100, FTIR Spectrometer
Contact
For more information, please contact Dr Jasna
Stevanic Srndovic ([email protected],
+46 8 676 7225).
We look forward to your inquiries!
SPECTROSCOPIC MATERIAL PROPERTIES
FTIR Spectroscopy
Imaging FTIR Microscopy
Static FTIR Spectroscopy
This standard static mode is used for qualitative
analysis of different materials.
Imaging FTIR Microscopy
This technique is based on a combination of static
FTIR spectroscopy with light microscopy. It gives
possibility for analysing chemical compositions on
micrometer level of various materials. Also,
distribution and location of different components
across the thickness of a sample can be measured as
well as its homogeneity.
Measuring mode: Transmission
Spectral resolution: 4/8 cm-1 (0.1 cm-1 - 32 cm-1)
Spectral range: 4000 cm-1 - 400/700 cm-1
Detector: DTGS/MCT
Sample thickness: ca. 20 m - 40 m
Measuring area: 12 mm
ATR FTIR Spectroscopy
This mode is used for qualitative analysis of
surface of various materials.
Measuring mode: ATR (i.e. attenuated total
reflection)
Crystal: ZnSe
Contact area: 2 mm
Penetration depth: 2 m
Spectral resolution: 4/8 cm-1 (0.1 cm-1 - 32 cm-1)
Spectral range: 4000 cm-1 - 650 cm-1
Detector: DTGS
Sample thickness: up to 1 cm
Dynamic FTIR Spectroscopy
This technique is based on a combination of FTIR
spectroscopy with DMA (i.e. dynamic mechanical
analysis). It gives possibility for analysing
molecular interactions in complex polymeric
systems. Here, macroscopic property, i.e.
viscoelasticity, of a polymeric material is closely
coupled to submolecular cooperation, i.e.
ultrastructure, depending on local environment in a
polymeric material.
This technique is fulfilled with dynamic 2D FTIR
(i.e. two-dimensional FTIR), which is evaluating
technique providing useful information about interand intra-molecular interactions in complex
polymeric materials.
Measuring mode: Transmission
Spectral resolution: 4/8 cm-1 (0.1 cm-1 - 32 cm-1)
Spectral range: 3950 cm-1 - 700 cm-1
Detector: MCT
Sample thickness: ca. 20 m - 40 m
Sample size: 20 mm 25 mm
Measuring mode: Transmission
Pixel resolution: 25 m and 6.25 m
Spectral resolution: 4/8 cm-1 (2 cm-1 - 64 cm-1)
Spectral range: 4000 cm-1 - 720 cm-1
Detector: Linear Array MCT
Sample thickness: ca. 20 m - 40 m
Measuring area: up to 10 mm 10 mm
Imaging ATR FTIR Microscopy
Surface of samples as well as layered structures can
be analysed using this mode.
Measuring mode: ATR (i.e. attenuated total
reflection)
Crystal: Ge
Contact area: 600 m
Penetration depth: 0.5 m
Pixel resolution: 6.25 m and 1.56 m
Spectral resolution: 4/8 cm-1 (2 cm-1 - 64 cm-1)
Spectral range: 4000 cm-1 - 720 cm-1
Detector: Linear Array MCT
Sample thickness: up to 0.8 cm
Point Mode FTIR Microscopy
Chemical composition of samples can be analysed,
but also chemical composition in layered structures,
due to a possibility of running the system in so
called line scan mode.
Measuring mode: Transmission
Aperture: 100 m and 25 m
Spectral resolution: 4/8 cm-1 (0.5 cm-1 64 cm-1)
Spectral range: 4000 cm-1 - 700 cm-1
Detector: MCT
Sample thickness: ca. 20 m - 40 m
INNVENTIA AB is a world leader in research and development relating to pulp, paper, graphic
media, packaging and biorefining. Our unique ability to translate research into innovative products
and processes generates enhanced value for our industry partners. We call our approach boosting
business with science. Innventia is based in Stockholm, Bckhammar and in Norway and the U.K.
through our subsidiaries PFI and Edge respectively.
