Scheduled services
No.
Operating
hours
< 1200 rpm
75
300
Operating
hours
> 1200 rpm
Activity
1.1
Remove and discard filter bag in suction filter.
Clean suction filter. Following major repair work or
in event of severe soiling of filter bag, it is recommended that a new filter bag be fitted for another
period of 50 operating hours.
1.2
Check tension of driving belts.
2.1
Check or change oil. When changing oil, change oil
filter cartridge, too. See following section:
Assessing the oil.
2.2
Clean suction filter.
2.3
Check that following function correctly:
Solenoid valves
Compressor cooling
Thermopump
Safety automatics
Heating rod
V-belt drive.
2.4
Retighten external piping connections.
2.5
Check oil return system from oil separator.
50
200
2.6
7500
Retighten coupling.
3.1
Check or change oil. When changing oil, change
oil filter cartridge, too. See following section:
Assessing the oil.
3.2
Clean suction filter.
3.3
Check that following function correctly:
Solenoid valves
Compressor cooling
Thermopump
Safety automaitcs
Heating rod
V-belt drive
Oil return system from oil separator.
3.4
For heat pump operation, inspect:
Valve seats
Cylinder linings
Pistons, gudgeon pins and gudgeon pin bearings
Piston and oil scraper rings.
5000
Change suction and discharge valve ring plates.
3.5
Finish off with a pressure drop test.
27
0171-350-EN
No.
Operating
hours
< 1200 rpm
15000
22500
Operating
hours
> 1200 rpm
Activity
4.1
Check or change oil. When changing oil, change oil
filter cartridge, too. See following section: Assessing
the oil.
4.2
Clean suction filter.
4.3
Check following:
Solenoid valves
Oil cooling system
Water cooling system for any deposits and clogging
Thermopump
Safety automatics
Heating rod
V-belt drive
Coupling and alignment
Oil return system from oil separator
Valve seats
Cylinder linings
Pistons, gudgeon pins and gudgeon pin bearings
Piston and oil scraper rings
Unloading mechanism
Seal for tightness
4.4
Change:
Suction and discharge valve ring plates
V-belts
4.5
Finish off with a pressure drop test.
5.1
Check V-belt drive
5.2
For heat pump operation, inspect:
Valve seats
Cylinder linings
Pistons, gudgeon pins and gudgeon pin bearings
Piston and oil scraper rings.
10000
15000
Change:
Suction and discharge valve ring plates.
No.
Operating
Hours
< 1200 rpm
Operating
Hours
> 1200 rpm
Activity
6.1
30000
Change compressor oil,
. Change oil filter cartridge,
Clean crankcase.
6.2
Clean suction filter.
6.3
Check following:
Solenoid valves
Oil cooling system
Water cooling system for any deposits and clogging
Thermopump
Safety automatics
Heating rod
V-belt drive
Coupling and alignment
Valve seats
Cylinder linings
Pistons, gudgeon pins and gudgeon pin bearings
Piston and oil scraper rings
Unloading mechanism
Seal for tightness
Oil pump and drive
Check valves.
6.4
Change:
Suction and discharge valve ring plates
V-belts
Half-sections of bearing for connecting rod
(does not apply to CMO compressors)
6.5
Finish off with a pressure drop test.
20000
37500
25000
As for service no. 5
45000
30000
As for service no. 4
52500
35000
As for service no. 3
10
60000
40000
Major overhaul; contact SABROE Refrigeration
Then repeat scheduled services from no. 3 inclusive.
