2-Multi-band Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
824 960
824 960
65
65
0 8
0 8
set by hand or by optional RCU (Remote Control Unit)
XXPol Panel 824960/824960 65/65 17/17dBi 08/08T
80010517V01
Type No.
Frequency range
Polarization
Gain at 0 tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio
Cross polar ratio
0
Sector
60
Vertical Pattern:
Half-power beam width
Electrical tilt
Sidelobe suppression for
rst sidelobe above main beam
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
824 960
824 894 MHz
880 960 MHz
+45, 45; +45, 45
+45, 45; +45, 45
4 x 16.5 dBi
4 x 16.7 dBi
66
> 25 dB
Typically: 16 dB
> 8 dB
61
> 25 dB
Typically: 17 dB
> 10 dB
7.2
6.8
0 8, continuously adjustable
0 ... 4 ... 8 T
0 ... 4 ... 8 T
15 ... 15 ... 15 dB
15 ... 16 ... 15 dB
50
< 1.5
Typically: > 25 dB
> 28 dB
< 150 dBc (2 x 43 dBm carrier)
500 W (at 50 C ambient temperature)
824 894 MHz: +45/45 Polarization
130
66
7.2
824960
45
824960
+45
824960
+45
7-16
7-16
7-16
7-16
dB
dB
10
10
3
824960
45
Mechanical specifications
0
0
Input
Connector position
Adjustment
mechanism
Wind load
Vertical Pattern
0 8 electrical downtilt
880 960 MHz: +45/45 Polarization
120
61
6.8
936.4176
10
dB
Subject to alteration.
Horizontal Pattern
Horizontal Pattern
www.kathrein.de
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
Scope of supply
4 x 7-16 female
Rearside, pointing downwards
2 x, Position bottom
continuously adjustable
Frontal:
1210 N (at 150 km/h)
Lateral:
400 N (at 150 km/h)
Rearside: 1540 N (at 150 km/h)
200 km/h
2631 / 374 / 169 mm
H (Heavy)
28 kg / 30 kg (clamps incl.)
2896 x 392 x 222 mm
Panel and 2 units of clamps
for 50 115 mm diameter
Vertical Pattern
0 8 electrical downtilt
80010517V01 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
Accessories
General Information
Accessories
1 clamp
Mast: 50 115 mm diameter
1.0 kg
1 clamp
1 clamp
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
2.7 kg
4.8 kg
2 (included in the scope
of supply)
2 (order separately if required)
2 (order separately if required)
738546
85010002
85010003
Material:
Reflector screen: Weather-proof aluminum.
Fiberglass radome: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel.
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
738
Units per antenna
1887
Weight
approx.
Description
2631
Remarks
Type No.
72
64
Environmental tests:
Kathrein antennas fulfil the stated specifications after completion of the
environmental tests as defined in ETS 300 019-2-4. The homogenous
design of Kathreins antenna families uses identical modules and materials.
Extensive tests have been performed on typical samples and modules.
Layout of interface:
368
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
921
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Adjustment mechanism
with integrated scale
374
37
35
38
169
53
106
288
110
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010517V01
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1 3 P.O. Box 10 04 44 83004 Rosenheim Germany Phone +49 8031 184-0 Fax +49 8031 184-973
Subject to alteration.
Please note:
Bottom view
936.4176
230
