Siemens AG 2010

System Cabling
for SIMATIC S7
Catalog KT 10.2 2011

SIMATIC TOP CONNECT

Answers for industry.

KT10_2_2010_U2_en.fm Seite 1 Dienstag, 28. September 2010 7:13 19

Siemens AG 2010

Related Catalogs
SIMATIC
Products for
Totally Integrated Automation
and Micro Automation

ST 70

ST 70 N

Innovative Elektrotechnik
Auswahlkatalog
Elektro-Grohandel

E86060-K1003-A101-B2 1)

E86060-K4670-A151-A5-7600
SITOP
Power Supply
SITOP

KT 10.1

Interactive Catalog
Products for Automation
and Drives

E86060-K2410-A111-A7-7600

E86060-D4001-A500-C9-7600

SIMATIC HMI/
ST 80 / ST PC
PC-based Automation
Human Machine Interface Systems/
PC-based Automation

Industry Mall
Information and Oordering Platform
in the Internet:
www.siemens.com/industrymall

E86060-K4680-A101-B7-7600
SIRIUS
Industrial Controls

IC 10

E86060-K1010-A101-A1-7600
Industrial Controls
Catalogs in pdf format

E86060-D1001-A101-A1 1)

NC 61

E86060-K4461-A101-A3-7600

E86060-K4670-A101-B2-7600
SIMATIC
Products for
Totally Integrated Automation
and Micro Automation (News)

SINUMERIK & SINAMICS

Equipment for Machine Tools

IC 01

1)

Available only in German

CA 01

Kap01-1_Innentitel_en.fm Seite 1 Dienstag, 28. September 2010 4:22 16

Siemens AG 2010

SIMATIC TOP connect

System Cabling

Introduction
Answers for Industry
Totally Integrated Automation
The Industry Mall
SIMATIC TOP connect

Fully modular connection

Introduction
Selection overview
Front connector modules
Connecting cables
Connection modules
Configuration and wiring

Flexible connection
Introduction
Front connector modules

Configuration
Brief instruction to the configuration guide
Configuration guides

Appendix
Partner at Industry Automation and Drive
Technologies
Online Services
Service & Support
Subject index
Index of order numbers
Conditions of sale and delivery
Export regulations

Catalog KT 10.2 2011

The products and systems described in this

catalog are manufactured/distributed under
application of a certified
quality management
system in accordance
with DIN EN ISO 9001
(Certified Registration
No. 1108). The certificate is recognized by all
IQNet countries.

Supersedes:
Catalog KT10.2 2006
Refer to the Industry Mall for current updates
of this catalog:
www.siemens.com/automation/mall
The products contained in this catalog can also
be found in the interactive Catalog CA 01.
Order No.:
E86060-D4001-A500-C9-7600
Please contact your local Siemens branch
Siemens AG 2010

 Siemens AG 2010

1/2

Siemens KT 10.2 2011

 Siemens AG 2010

Answers for industry.

Siemens Industry answers the challenges in the

manufacturing and the process industry as well as in
the building automation business. Our drive and automation
solutions based on Totally Integrated Automation (TIA) and
Totally Integrated Power (TIP) are employed in all kinds
of industry. In the manufacturing and the process industry.
In industrial as well as in functional buildings.

Siemens offers automation, drive, and

low-voltage switching technology as
well as industrial software from standard products up to entire industry solutions. The industry software enables our
industry customers to optimize the entire value chain from product design
and development through manufacture
and sales up to after-sales service. Our
electrical and mechanical components
offer integrated technologies for the entire drive train from couplings to gear
units, from motors to control and drive
solutions for all engineering industries.
Our technology platform TIP offers robust solutions for power distribution.

The high quality of our products

sets industry-wide benchmarks.
High environmental aims are part of
our eco-management, and we implement these aims consistently. Right
from product design, possible effects on
the environment are examined. Hence
many of our products and systems are
RoHS compliant (Restriction of Hazardous Substances). As a matter of course,
our production sites are certified according to DIN EN ISO 14001, but to us,
environmental protection also means
most efficient utilization of valuable
resources. The best example are our
energy-efficient drives with energy savings up to 60 %.

Check out the opportunities our

automation and drive solutions provide.
And discover how you can sustainably
enhance your competitive edge with us.

Siemens KT 10.2 2011

1/3

 Siemens AG 2010

ERP Enterprise Resource Planning

Management Level

MES Manufacturing Execution Systems

Operations Level

SIMATIC PCS 7
Process Control (DCS)

Industrial Software for

Design and Engineering
Installation and Commissioning
Operation

Maintenance
Modernization and Upgrade
Energy Management

Control Level
SIMOTION
Motion Control System

SINUMERIK
Computer Numeric Control

Field Level
PROFIBUS PA
Process Instrumentation

Totally
Integrated
Automation

SIMATIC Sensors

HART
IO-Link

Setting standards in
productivity and competitiveness.
Totally Integrated Automation.
Thanks to Totally Integrated Automation, Siemens is the only provider
of an integrated basis for implementation of customized automation
solutions in all industries from inbound to outbound.

1/4

Siemens KT 10.2 2011

 Siemens AG 2010

02.03.2009

Ethernet

SIMATIC IT

Ethernet
SIMATIC WinCC
SCADA System

Industrial Ethernet
Industrial Ethernet

SIMATIC NET
Industrial
Communication

SIMATIC Controllers
Modular/Embedded/
PC-based

SIMATIC HMI
Human Machine Interface

Safety Integrated
Low-Voltage Controls
and Distribution

PROFINET

SIMATIC Distributed I/O

SINAMICS Drive Systems

PROFIsafe

Industrial Ethernet

PROFIsafe

PROFIBUS

ASIsafe

AS-Interface

Totally
Integrated
Power
KNX GAMMA instabus

TIA is characterized by its unique

continuity.
It provides maximum transparency at
all levels with reduced interfacing requirements covering the field level,
production control level, up to the corporate management level. With TIA
you also profit throughout the complete
life cycle of your plant starting with
the initial planning steps through operation up to modernization, where we
offer a high measure of investment security resulting from continuity in the
further development of our products
and from reducing the number of interfaces to a minimum.

The unique continuity is already

a defined characteristic at the
development stage of our products
and systems.
The result: maximum interoperability
covering the controller, HMI, drives, up
to the process control system. This reduces the complexity of the automation
solution in your plant. You will experience this, for example, in the engineering phase of the automation solution in
the form of reduced time requirements
and cost, or during operation using the
continuous diagnostics facilities of Totally Integrated Automation for increasing the availability of your plant.

Siemens KT 10.2 2011

1/5

 Siemens AG 2010

Much more
than a catalog.
The Industry Mall.

Selecting
Find your products in the structure tree, in the new "Bread-crumb"
navigation or with the integral search machine with expert functions.
Electronic configurators are also integrated into the Mall. Enter the
various characteristic values and the appropriate product will be displayed with the relevant order numbers. You can save configurations,
load them and reset them to their initial status.

You have a catalog in your hands that will serve

you well for selecting and ordering your products.
But have you heard of the electronic online catalog (the Industry Mall) and all its benefits? Take a
look around it sometime:

Ordering
You can load the products that you have selected in this way into the
shopping basket at a click of the mouse. You can create your own templates and you will be informed about the availability of the products
in your shopping cart. You can load the completed parts lists directly
into Excel or Word.

www.siemens.com/industrymall

Delivery status
When you have sent the order, you will receive a short e-mail confirmation which you can print out or save. With a click on "Carrier", you
will be directly connected to the website of the carrier where you can
easily track the delivery status.
Added value due to additional information
So you have found your product and want more information about it?
In just a few clicks of the mouse, you will arrive at the image data base,
manuals and operating instructions. Create your own user documentation with My Documentation Manager.
Also available are FAQs, software downloads, certificates and technical data sheets as well as our training programs. In the image database
you will find, depending on the product, 2D/3Dgraphics, dimension
drawings and exploded drawings, characteristic curves or circuit
diagrams which you can download.
Convinced? We look forward to your visit!

 Siemens AG 2010

SIMATIC TOP connect

TOP-class system cabling ..
... ensures fault-free and secure connection between individual components
of an electronic system - a basic requirement for correct functioning.

Siemens KT 10.2 2011

1/7

 Siemens AG 2010

A fault-free and secure connection between the individual

components of an electronic plant is a precondition for their
function.

Benefits

Conventional wiring such as single wiring with terminal strips

is often costly and error-prone. The larger the plant, the more
complex the cabling becomes. Significant added costs arise,
both for commissioning and for later service work.

Plugging in standardized connection elements is simply faster

than connecting a host of individual wires.

Standards are required here that simplify handling, increase

clarity, and reduce costs. Global availability must also be considered.

Competitive advantages thanks to significantly faster, global

availability of the system.

You save a lot of time

You save money

You avoid errors

The solution:

It is almost impossible to mix up individual cores.

SIMATIC TOP connect system cabling for SIMATIC S7
You gain clarity
With SIMATIC TOP connect, we supply all the connections for
SIMATIC on a worldwide basis.
You can choose between two connection concepts: fully modular connection in accordance with the building-block principle, and flexible connection with bundled single cores.

The cable strands can be easily followed down to the last detail with visual quality features.
Connection is easy
Use your competent people where theyre needed.
You can be flexible

Single wires

SIMATIC TOP connect

SIMATIC S7

SIMATIC S7

Not like
this!

Like
this!

You get everything from a single source

with the familiar Siemens quality.

Prone to error

Connection of sensors/actuators

G_KT01_EN_00109

Connection of sensors/actuators

Wiring of SIMATIC S7 I/O modules with the sensors/actuators

is a significant factor with respect to time/cost overhead, configuration, control cabinet manufacture, procurement and
ease of service.
With SIMATIC TOP connect system cabling, this connection is
established for your SIMATIC S7-300/400 simply, quickly and
reliably.

1/8

Siemens KT 10.2 2011

Whether youre using bundled single cores, pre-assembled

round cables, or your own assemblies you decide.

With a single order and that means simplified logistics for

you.

 Siemens AG 2010

Design

Application

We offer you two cabling variants for implementing your control cabinet concepts:

Fully modular connection is the fastest and most secure method of system cabling. Sensors and actuators from the I/O are
routed to the connection module of SIMATIC TOP connect and
linked to the front connector module of the SIMATIC S7-300 or
S7-400 easily and without errors using a connection cable.
The connection cables here are available either preassembled
or by the meter for lengthoptimized self-assembly.

Fully modular connection

consisting of the following individual components:
Front connector module for SIMATIC S7-300 and S7-400
Connecting cable, pre-assembled or sold by the meter
Connection module, in the following versions: Basic module,
signal module and function module
The wiring overhead is extremely low and connection errors
are prevented thanks to reverse polarity protection. The modular building block principle allows fewer storage items, even
when you use different SIMATIC systems.
Flexible connections
Consisting of:
Front connector with fixed, bundled individual wires
The single wires are also available with UL/CSA-certified cores.

The connection modules are not only the electrical interface

between the control cabinet and the machine: On the signal
modules, LEDs indicate the switching status of digital signals
and application of the 24 V DC voltage.
The function modules enable adaptation to the voltage potentials required in the I/O.
With flexible connection, comprising front connector with
single cores, 16 or 32 digital input and output channels are
connected directly with the sensors and actuators. The single
cores are attached with screw contacts or crimp contacts, installed in the front connector and cut off straight at the other
end. The cores can be easily assigned to any element in the
control cabinet.
Fifty percent of assembly costs are saved compared with conventional single wiring.

The blue wires are sequentially numbered and can be routed

direct to each element in the control cabinet. These numbers
of the single wires correspond to the coding of the front connector contacts.
This eliminates time-consuming preparing of as many as 2 x
46 individual wires per module.
The core cross-section is also suitable for higher currents.
Even when the cores are shortened or redirected, the wiring
remains extremely simple. You wont lose track of your connection again. And although single wires are laid, the wiring
arrangement is always neat and tidy.

Siemens KT 10.2 2011

1/9

 Siemens AG 2010

1/10

Siemens KT 10.2 2011

Kap02-1_ML1.fm Seite 1 Dienstag, 28. September 2010 9:44 21

Siemens AG 2010

Fully modular connection

2/2

Introduction

2/6
2/6
2/8
2/10
2/12

Selection overview
SIMATIC S7-300 Compact CPU
SIMATIC S7-300 digital
SIMATIC S7-300 analog
SIMATIC S7-400

2/14
2/14
2/23

Front connector modules

S7-300 front connector modules
S7-400 front connector modules

2/27
2/27

Connecting cables
Connecting cables

2/29
2/29
2/30
2/36
2/41

Connection modules
Overview
Basic modules
Signal modules
Function module

2/47
2/47

Configuration and wiring

Mounting of round-sheath ribbon cable
and S7-300 connector
Mounting of round-sheath ribbon cable
and S7-400 connector
Wiring of S7-300 analog modules
Wiring of S7-400 analog modules

2/48
2/49
2/52

Siemens KT 10.2 2011

Kap02-2_Fully modular-1.fm Seite 2 Dienstag, 28. September 2010 9:45 21

Siemens AG 2010

Fully modular connection

Introduction

Overview

Design
Front connector module
Modified front connectors, called front connector modules, are
available for connecting to the module. These are plugged into
the module to be wired instead of the front connector. The front
connector modules are available in many different versions. For
the SIMATIC S7-300 and SIMATIC S7-400, digital or analog. The
connecting cables are plugged into these front connector modules.
Connecting cable

The connecting cable is available in two different versions.

As a pre-assembled 16-pole round cable (shielded or unshielded) up to a length of 5 m, or the 16-pole round-sheath ribbon
cable (with or without shield), which can be easily assembled by
the user, or as 2 x 16-pole round-sheath ribbon cables (without
shield).
When assembled, there are one or two insulation displacement
connectors (female ribbon connectors) at both ends of the cable.
The round-sheath ribbon cable is assembled by the user with
the aid of pliers (to be ordered separately). The cable transmits
8 or 2 x 8 channels over a distance of up to 30 m.
The fully modular connection is the standard connection for the
SIMATIC S7-300/400. The fully modular connection allows the
peripherals to be conveniently and quickly connected to the
SIMATIC S7-300/400 without errors.

Benefits
Easy plugging in of front connector module, connecting cable
and connection module
Fast and low-cost wiring
Supply voltage connectable to front connector module or connection module for digital and analog signals
Reduction in wiring errors, clear control cabinet wiring
Distribution of digital signals by byte or by double-byte
Each component can be replaced individually.
Every cable length can be configured without cutting, or preassembled cables can be used

The connecting cable connects the front connector module with

the connection module.
Connection module
The system has digital and analog connection modules for connecting the I/O signals. These are snapped onto the standard
mounting rail.
The connection modules are available for two connection methods: with spring-loaded or screw-type terminals
Basic module:
Connection modules with basic functionality for getting the signal from the field to the module or from the module to the field
quickly and easily. For digital or analog signals.
Signal module:
Expands the digital basic module with LEDs for signaling the active high signal. This makes commissioning easier for you, and
you always have an overview of the signal states of your I/O. One
LED signals the availability of the supply voltage.
Function module:
Digital connection modules that are fitted with relays or optocouplers.
If other voltage or power levels are required in the field, the connection module for output signals TPRo or TPOo is used. For the
TPRo connection module, relays are used for the implementation. For the TPOo connection module, optocouplers are used
for the implementation. This converts the 24 V DC output signal
simply and reliably to another voltage or power level. If 230 V AC
input signals have to be transmitted to the controller in the field,
a connection module with relay TPRi is available that simply converts the 230 V AC signal to 24 V DC. This means that there is
always the same voltage level on the module side.
Use with optocouplers for the TPRo relay modules
If higher switching frequencies of the relay connection module
are required for the output signals, the relay can simply be replaced with an optocoupler (note technical specifications) in order to increase the switching frequency here.

2/2

Siemens KT 10.2 2011

Kap02-2_Fully modular-1.fm Seite 3 Dienstag, 28. September 2010 9:45 21

Siemens AG 2010

Fully modular connection

Introduction

Design (continued)

Function

Shield plate
The shield plate is latched onto the connection module for 3core initiators or optionally onto the connection module for analog signals and then snapped onto the mounting rail with the
connection module. With the terminal elements, optimal shield
connection is achieved between the shielded round-sheath ribbon cable or the shielded field cables and the grounded mounting rail.

By using the fully modular system, the signal modules and the
sensors/actuators can be up to 30 m apart, depending on requirements. Connection modules can be connected to the connecting cables. The I/O is connected to the connection module
on site. The connection module is available in various performance ranges.
The potential infeed can be applied at the connection module or
the front connector module.

Front connector
module
Voltage
infeed
possibility

Voltage
infeed
possibility
Connection
cable 30 m max.

Connection cable
30 m max.

G_KT01_EN_00110

Connection modules
TP 3

Voltage
infeed
possibility

Actuator

Design of the fully modular connection (16-channel in example)

Siemens KT 10.2 2011

2/3

Kap02-2_Fully modular-1.fm Seite 4 Dienstag, 28. September 2010 9:45 21

Siemens AG 2010

Fully modular connection

Introduction

Integration
With the fully modular connection of SIMATIC TOP connect, it is
possible to wire the following components:
Note:
The product version of the modules can change, which in turn
can change the order numbers of the modules.

For the SIMATIC S7-300

Compact CPU

Digital I/O modules

Analog I/O modules

CPU 312C
6ES7 312-5BE03-0AB0
CPU 313C
6ES7 313-5BF03-0AB0
CPU 313C-2PtP
6ES7313-6BF03-0AB0
CPU 313C-2 DP
6ES7313-6CF03-0AB0
CPU 314C-2PtP
6ES7314-6BG03-0AB0
CPU 314C-2 DP
6ES7314-6CG03-0AB0

SM 321
DI 32 x DC 24 V
6ES7321-1BL00-0AA0
DI 16 x DC 24 V
6ES7321-1BH02-0AA0
DI 16 x DC 24 V high speed
6ES7321-1BH10-0AA0
DI 16 x DC 24 V; source input
6ES7321-1BH50-0AA0

SM 331
AI 8 x 13 bit
6ES7331-1KF02-0AB0
AI 2 x 9/12/14 bit
6ES7331-7KB02-0AB0
AI 8 x 9/12/14 bit
6ES7331-7KF02-0AB0
AI 8 x 16 bit
6ES7331-7NF00-0AB0
AI 8 x 16 bit
6ES7331-7NF10-0AB0
AI 8 x 16 (internal 24) bit
6ES7331-7PF01-0AB0
AI 8 x 16 bit
6ES7331-7PF11-0AB0

SM 322
DO 32 x DC 24 V/0,5 A
6ES7322-1BL00-0AA0
DO 16 x DC 24 V/0,5 A can be redundant
6ES7322-8BH01-0AB0
DO 16 x DC 24 V/0,5 A
6ES7322-1BH01-0AA0
DO 16 x DC 24 V/0,5 A high speed
6ES7322-1BH10-0AA0
DO 8 x DC 24 V/0,5 A
6ES7322-8BF00-0AB0
DO 8 x DV 24 V/2 A
6ES7322-1BF01-0AA0
SM 323
DI 16/DO 16 x DC 24 V/0,5 A
6ES7323-1BL00-0AA0
DI 8/DO 8 x DC 24 V/0,5 A
6ES7323-1BH01-0AA0

SM 332
AO 2 x 11/12 bit
6ES7332-5HB01-0AB0
AO 4 x 11/12 bit
6ES7332-5HD01-0AB0
AO 8 x 11/12 bit
6ES7332-5HF00-0AB0
AO 4 x 15 bit
6ES7332-7ND02-0AB0
SM 334
AI 4/AO 2 x 8/8 bit
6ES7334-0CE01-0AA0
AI 4/AO 2 x 12/12 bit
6ES7334-0KE00-0AB0
SM 335
AI 4 x 14 bit
6ES7335-7HG02-0AB0

2/4

Siemens KT 10.2 2011

Kap02-2_Fully modular-1.fm Seite 5 Dienstag, 28. September 2010 9:45 21

Siemens AG 2010

Fully modular connection

Introduction

Integration (continued)
Note:
The product version of the modules can change, which in turn
can change the order numbers of the modules.

For the SIMATIC S7-400

Digital I/O modules

Analog I/O modules

SM 421
DI 32 x DC 24 V
6ES7421-1BL01-0AA0

SM 431
AI 8 x 13 bit
6ES7431-1KF00-0AB0
AI 8 x 14 bit
6ES7431-1KF20-0AB0
AI 16 x 13 bit
6ES7431-0HH00-0AB0
AI 8 x 16 bit
6ES7431-1KF10-0AB0

SM 422
DO 16 x DC 24 V/2 A
6ES7422-1BH11-0AA0
DO 32 x DC 24 V/0,5 A
6ES7422-1BL00-0AA0
DO 32 x DC 24 V/0,5 A with 0,15 ms
output delay
6ES7422-7BL00-0AB0

SM 432
AO 8 x 13 bit
6ES7432-1HF00-0AB0

Siemens KT 10.2 2011

2/5

Kap02-3_Selection overview_S7.fm Seite 7 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 Compact CPU

Selection overview SIMATIC S7-300 Compact CPU

Front connector modules
for digital
modules

Modules
SIMATIC S7-300 Compact CPU
Connector

Compact CPU 2-5BD01-0AB0

312C

X1

Compact CPU 3-5BE01-0AB0

313C

X1

40
40

40

40

40

6ES7921-3AM20-0AA0

6ES7921-3AB20-0AA0

Order No.:

40

If necessary, it can also be used for the digital signals a shield connection must be provided on the user side.

Only for the digital inputs (max. 2 units)

Siemens KT 10.2 2011

Lengths

Lengths

7 7 CD = 30 m
7 7 CG = 60 m

7 7 7 BA5 = 0.5 m1)

7 7 7 BB0 = 1.0 m
7 7 7 BB5 = 1.5 m1)
7 7 7 BC0 = 2.0 m
7 7 7 BC5 = 2.5 m
7 7 7 BD0 = 3.0 m
7 7 7 BE0 = 4.0 m
7 7 7 BF0 = 5.0 m
1)

Module can be used

Only for the digital outputs (max. 2 units)
Only for the digital outputs (max. 1 unit)
The shielded cable must be used for the analog signals.

6ES7923-0 7 7 7 0-0DB0

40

X2

6ES7923-2 7 7 00-0AA0

X1

6ES7923-0 7 7 7 0-0CB0

6ES7923-0 7 7 00-0BA0

40

6ES7923-0 7 7 00-0AA0

X1

40

2/7

X1

X2
Compact CPU 4-6CF02-0AB0
314C-2DP

X1

X2
Compact CPU 4-6BF02-0AB0
314C-2PtP

Screw terminals

Round cable
assembled with
IDC connectors

CPU 313C/314C-2 162x16161616pole un- pole un- pole

pole
pole
shielded shielded shielded shielded shielded
Screw terminals

X2
Compact CPU 3-6CE01-0AB0
313C-2DP

Screw
terminals

Round-sheath
ribbon cable
sold by the meter

X2
Compact CPU 3-6BE01-0AB0
313C-2PtP

Poles Spring
ss
terminals

CPU 312C

6ES7921-3AK20-0AA0

Order No.
6ES731.-...

4 x I/O

6ES7921-3AA20-0AA0

Connection cables
for Compact CPU modules

only unshielded

Kap02-3_Selection overview_S7.fm Seite 8 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 Compact CPU

Connection modules

Accessories

max. number for inputs/outputs digital

of required
connection
modules
1x8 I/O
2x8 I/O
per module

TP11)

TP32)

with
LED

without
LED

with
LED

without
LED

with
LED

with
LED

with
LED

6ES7924-1AA10-0B 7 0

6ES7924-0CA10-0A 7 0

6ES7924-0CA10-0B 7 0

6ES7924-0BD10-0B 7 0

6ES7924-0BE10-0B 7 0

TPRo TPRi
TPOo

6ES7924-1AA10-0A 7 0

digital analog without

LED

TPK1)

6ES7924-0AA10-0B 7 0

CPU

6ES7924-0AA10-0A 7 0

8 I/O

1x8 I/O

Relay, outanalog Crimpput and 8 NO

ing tool
contacts
insulaInput Input
tion
24 V 230 V
displaceDC
AC
ment
connectors

8 connectors and
8 strainrelief assemblies
insulation
displacement connectors

Labeling
strip

Labeling
strip

Shield
plate

Shield
connection
terminal

for connection
modules,
inserted

for connection
modules,
selfadhesive

for analog
connection module

for shield
plate

TPA

without
LED

6ES7921-3BE10-0AA0

6ES7928-2AB00-0AA0

6ES7928-2BB00-0AA0

6ES7928-1BA00-0AA0

6ES7390-5AB00-0AA0
6ES7390-5BA00-0AA0
6ES7390-5CA00-0AA0

4
1

6ES7924-0CC10-0A 7 0

6ES7928-0AA00-0AA0

Type

7 A = Screw terminals
7 B = Spring terminals

Important:
When counting the connection modules,
the connection module TPK counts as 2.

1) TP1, TPK = 1-wire connection

2) TP3 = 3-wire connection

Siemens KT 10.2 2011

2/8

Kap02-3_Selection overview_S7.fm Seite 9 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 digital

Selection overview SIMATIC S7-300 digital

Front connector modules

Connection cables

for digital modules

Modules SIMATIC S7-300 digital

DI 16 x
24 V DC

1-1BH02-0AA0

DI 16 x
24 V DC
High Speed

1-1BH10-0AA0

DI 16 x
24 V DC
source input

1-1BH50-0AA0

16pole unshielded

2x16pole unshielded

1616pole un- pole

shielded shielded

40

20

20

DO 16 x
2-1BH01-0AA0
24 V DC/0.5 A

20

DO 16 x
2-1BH10-0AA0
24 V DC/0.5 A
High Speed

20

DO 8 x
2-8BF00-0AB0
24 V DC/0.5 A

20

DO 8 x
24 V DC/2 A

20

6ES7923-0 7 7 00-0BA0

40

6ES7923-2 7 7 00-0AA0

DO 16 x 24 V DC/ 2-8BH01-0AB0
0.5 A can be
made redundant

6ES7923-0 7 7 00-0AA0

40

DI 8/DO 8 x
3-1BH01-0AA0
24 V DC/0.5 A

20

6ES7921-3AA20-0AA0

Order No.:

6ES7921-3AB00-0AA0

6ES7921-3AC00-0AA0

40

6ES7921-3AB20-0AA0

SM 323 DI 16/DO 16 x 3-1BL00-0AA0

24 V DC/0.5 A

16pole
shielded

20

SM 322 DO 32 x
2-1BL00-0AA0
24 V DC/0.5 A

2-1BF01-0AA0

Round cable
assembled with
IDC connectors

Lengths

Lengths

7 7 CD = 30 m
7 7 CG = 60 m

7 7 7 BA5 = 0.5 m1)

7 7 7 BB0 = 1.0 m
7 7 7 BB5 = 1.5 m1)
7 7 7 BC0 = 2,0 m
7 7 7 BC5 = 2.5 m
7 7 7 BD0 = 3.0 m
7 7 7 BE0 = 4.0 m
7 7 7 BF0 = 5.0 m
1) only

Module can be used

Only for the outputs
Only for the inputs
If necessary, the shielded cable can be used a shield connection must be provided on the user side.

2/9

Siemens KT 10.2 2011

6ES7923-0 7 7 7 0-0DB0

1-1BL00-0AA0

Poles Spring
Screw
Spring
Screw
Spring
Screw
terminals terminals terminals terminals terminals terminals

Round-sheath ribbon
cable
sold by the meter

6ES7923-0 7 7 7 0-0CB0

SM 321 DI 32 x
24 V DC

4x8 E/A

6ES7921-3AD00-0AA0

Order No.
6ES732.-...

2x8 E/A

6ES7921-3AA00-0AA0

for 2 ampere
digital outputs

unshielded

Kap02-3_Selection overview_S7.fm Seite 10 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 digital

Connection modules

Accessories

For inputs/outputs digital

1x8 I/O

Relais,
output and
8 NO contacts

2x8 I/O

TP11)
max. no. of
required 8
I/O connec- without with
tion modules LED
LED
per module

1x8 I/O

TPK1)
without
LED

TP32)

with
LED

without
LED

with
LED

Input
24 V
DC

Input
230 V
AC

TPRo
TPOo

TPRi

with
LED

with
LED

2 ampere,
Crimping
8 digital outputs tool

insulation
displacement connectors

8 connectors and
8 strainrelief assemblies
insulation
displacement connectors

Labeling
strip

Labeling
strip

for connection
modules,
inserted

for connection
modules,
selfadhesive

TP2
without
LED

with
LED

6ES7924-0AA10-0A 7 0

6ES7924-0AA10-0B 7 0

6ES7924-1AA10-0A 7 0

6ES7924-1AA10-0B 7 0

6ES7924-0CA10-0A 7 0

6ES7921-3BE10-0AA0

6ES7928-2AB00-0AA0

4
2
2
2

4
4
2
2
2

6ES7928-2BB00-0AA0

6ES7924-0BB10-0B 7 0

6ES7924-0BB10-0A 7 0

6ES7924-0CA10-0B 7 0

6ES7924-0BE10-0B 7 0

6ES7924-0BD10-0B 7 0

6ES7928-0AA00-0AA0

Type

7 A = Screw terminals
7 B = Spring terminals

Important:
When counting the connection modules,
the connection module TPK counts as 2.

1)
TP1, TPK = 1-wire connection
2) TP3 = 3-wire connection

Siemens KT 10.2 2011

2/10

Kap02-3_Selection overview_S7.fm Seite 11 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 analog

Selection overview SIMATIC S7-300 analog

Front connector modules

Connection cables

for analog modules

Modules SIMATIC S7-300 analog

20-pole

1-7KB02-0AB0

20

AI 8 x 9/12/14 bits

1-7KF02-0AB0

20

AI 8 x 16 bits

1-7NF00-0AB0

40

AI 8 x 16 bits

1-7NF10-0AB0

40

AI 8 x RTD x 16 bits
(internal 24 bits)

1-7PF01-0AB0

40

8 x TC x 16 bits

1-7PF11-0AB0

40

SM 332 AO 2 x 11/12 bits

2-5HB01-0AB0

20

AO 4 x 11/12 bits

2-5HD01-0AB0

20

AO 8 x 11/12 bits

2-5HF00-0AB0

40

AO 4 x 15 bits

2-7ND02-0AB0

20

4-0CE01-0AA0

20

AI 4/AO 2 x 12/12 bits 4-0KE00-0AB0

20

SM 334 AI 4/AO 2 x 8/8 bits

SM 335 AI 4 x 14 bits

5-7HG01-0AB0

20

Order No.:

Module can be used

2/11

Siemens KT 10.2 2011

Screw
erminals

16-pole
shielded

16-pole
shielded

6ES7923-0 7 7 7 0-0DB0

AI 2 x 9/12/14 bits

Spring
terminals

6ES7923-0 7 7 00-0BA0

40

40-pole

Screw
terminals

6ES7921-3AG20-0AA0

1-1KF01-0AB0

SM 331 AI 8 x 13 bits

Spring
terminals

6ES7921-3AF20-0AA0

Poles

6ES7921-3AG00-0AA0

Order No.
6ES733.-...

Round cable
assembled with
IDC connectors

6ES7921-3AF00-0AA0

Round-sheath
ribbon cable
sold by the meter

Lengths

Lengths

7 7 CD = 30 m
7 7 CG = 60 m

7 7 7 BB0 = 1.0 m
7 7 7 BC0 = 2.0 m
7 7 7 BC5 = 2.5 m
7 7 7 BD0 = 3.0 m
7 7 7 BE0 = 4.0 m
7 7 7 BF0 = 5.0 m

Kap02-3_Selection overview_S7.fm Seite 12 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-300 analog

Accessories

Connection module

Crimping tool

8 connectors
and
8 strain-relief
assemblies

Labeling strip

Labeling strip

Shield plate

Shield
connection
terminal

analog

insulation
displacement
connectors

insulation
displacement
connectors

for connection
modules,
inserted

for connection
modules,
self-adhesive

for analog
connection
module

for shield plate

TPA

4
4
1
2
4
2
2
2
2

6ES7390-5AB00-0AA0
6ES7390-5BA00-0AA0
6ES7390-5CA00-0AA0

6ES7928-1BA00-0AA0

6ES7928-2BB00-0AA0

6ES7928-2AB00-0AA0

6ES7921-3BE10-0AA0

6ES7928-0AA00-0AA0

without LED

6ES7924-0CC10-0A 7 0

max. number
of required
connection
modules
per module

for inputs/outputs

Type

7 A = Screw terminals
7 B = Spring terminals

Siemens KT 10.2 2011

2/12

Kap02-3_Selection overview_S7.fm Seite 13 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-400

Selection overview SIMATIC S7-400 modules

Front connector modules
for digital
modules

Connecting cables
for analog
modules

Round-sheath ribbon cable

sold by the meter

Round cable
assembled with
IDC connectors

16-pole
2x16-pole 16-pole
unshielded unshielded shielded

16-pole
16-pole
unshielded shielded

2 ampere

Modules SIMATIC S7-400

4 x I/O
Poles

22-1BH11-0AA0

48

DO 32 x
22-1BL00-0AA0
24 V DC/0.5 A

48

DO 32 x
22-7BL00-0AB0
24 V DC/0.5 A

48

31-7KF10-0AB0

31-1KF20-0AB0

AI 16 x 13 bits 31-0HH00-0AB0

SM 432 AO 8 x 13 bits 32-1HF00-0AB0

48
48
48
48

Order No.:

6ES7923-0 7 7 00-0AA0

AI 8 x 16 bits

48

6ES7921-4AG00-0AA0

31-1KF00-0AB0

6ES7921-4AD00-0AA0

SM 431 AI 8 x 13 bits

AI 8 x 14 bits

Lengths

Lengths

7 7 CD = 30 m
7 7 CG = 60 m

7 7 7 BA5 = 0.5 m1)

7 7 7 BB0 = 1.0 m
7 7 7 BB5 = 1.5 m1)
7 7 7 BC0 = 2.0 m
7 7 7 BC5 = 2.5 m
7 7 7 BD0 = 3.0 m
7 7 7 BE0 = 4.0 m
7 7 7 BF0 = 5.0 m
1) only

Module can be used

Only for the outputs
If necessary, the shielded cable can be used a shield connection must be provided on the user side.

2/13

Siemens KT 10.2 2011

6ES7923-0 7 7 7 0-0DB0

SM 422 DO 16 x
24 V DC/2 A

48

6ES7923-0 7 7 7 0-0CB0

21-1BL01-0AA0

Screw termi- Screw termi- Screw terminals

nals
nals

6ES7923-0 7 7 00-0BA0

SM 421 DI 32 x
24 V DC

2x8A

6ES7923-2 7 7 00-0AA0

Order No.
6ES74..-...

6ES7921-4AB00-0AA0

unshielded

Kap02-3_Selection overview_S7.fm Seite 14 Mittwoch, 29. September 2010 12:35 12

Siemens AG 2010

Fully modular connection

Selection overview
SIMATIC S7-400

Connection module

Accessories

for inputs/outputs digital

1x8 I/O
max.
number
of
TP11)
required
8 I/O
connection
modules with- with
per
out
LED
module LED

2x8 I/O

Relais,
output
and 8 NO
contacts
1x8 I/O

TPK1)

TP32)

Input
24 V
DC

2 ampere,
8 digital
outputs

Input
230 V
AC

TPRo TPRi
TPOo

without
LED

with
LED

without
LED

with
LED

with
LED

analog Crimping tool

with
LED

TP2

without
LED

TPA

with
LED

8 connectors
and 8
strainrelief
assemblies
insulainsulation
tion
displace- displace
ment
ment
connec- connectors
tors

LabeLabeShield
ling strip ling strip plate

for
connection modules,
inserted

for
connection modules,
selfadhesive

Shield
conneciIon
terminal

for
for
analog
shield
connec- plate
tion
module

without
LED

6ES7924-0CC10-0A 7 0

6ES7928-0AA00-0AA0

6ES7921-3BE10-0AA0

6ES7928-2AB00-0AA0

6ES7928-2BB00-0AA0

6ES7928-1BA00-0AA0

6ES7390-5AB00-0AA0
6ES7390-5BA00-0AA0
6ES7390-5CA00-0AA0

Siemens KT 10.2 2011

2/14

4
4
4
4
4

6ES7924-0BB10-0B 7 0

6ES7924-0BB10-0A 7 0

6ES7924-0BE10-0B 7 0

6ES7924-0BD10-0B 7 0

6ES7924-0CA10-0B 7 0

6ES7924-0CA10-0A 7 0

6ES7924-1AA10-0B 7 0

6ES7924-1AA10-0A 7 0

6ES7924-0AA10-0B 7 0

6ES7924-0AA10-0A 7 0

Type

7 A = Screw terminals
7 B = Spring terminals

Important:
When counting the connection modules, 1)
the connection module TPK counts as 2. 2) TP1, TPK = 1-wire connection
TP3 = 3-wire connection

Kap02-4_Fully modular-2.fm Seite 14 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
Front connector modules

Overview

More information
The following restrictions apply when connecting front connector
modules:
The summation current less than 4 A per byte
The positive infeed of an external supply voltage can be connected to the connection module. In this way the supply voltage
is routed over the connection cable. Due to the restricted current
carrying capacity of the connection cable, the summation current of 4 A/byte must never be exceeded.

Summation current higher than 4 A per byte

Additional connection cables are used to route summation currents which are higher than 4 A from an external power supply to
the module. The additional connection cables are connected to
special connection sockets of the front connector..

Modified front connectors, called front connector modules, are

available for connection to the modules. These are plugged into
the module to be wired instead of the front connector. The front
connector modules are available in various versions. For the SIMATIC S7-300 and SIMATIC S7-400, digital or analog. The connection cables are plugged into these front connector modules.

2/14

Siemens KT 10.2 2011

Kap02-4_Fully modular-2.fm Seite 15 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Design

Integration
For the connection to the signal module (integrated I/O for the
compact CPUs, digital and analog), the front connector module
is plugged into the signal module instead of the SIMATIC S7-300
front connector. It has 2 to 4-pin plugs for the connection of the
connecting cables and 2 to 4 connections for potential infeed.
There are different versions for the connection of the compact
CPUs (X1), digital 24 V/0.5 A I/O signals 16-channel and 32channel, for digital 24 V/2 A output modules and for analog I/O
modules.
Use with components of the SIMATIC S7-300
The front connector modules replace the standard SIMATIC
connectors
- 6ES7 392-1AJ00-0AA0
- 6ES7 392-1AM00-0AA0
- 6ES7 392-1BJ00-0AA0
- 6ES7 392-1BM01-0AA0
- 6ES7 392-1CJ00-0AA0
- 6ES7 392-1CM00-0AA0
- 6ES7 921-3AH00-0AA0
- 6ES7 921-3AH20-0AA0
The circuit diagrams for the front connector modules
(module on top - IDC connector below) can also be found
under Circuit diagrams.

With the compact CPUs, up to three connecting cables can be

connected to the front connector modules at slot X1. The connection modules can be connected by means of the connecting
cables. The front connector modules for 32 digital channels can
be connected to the front connector modules at slot X2.
Up to 2 or 4 connecting cables can be connected to the front
connector modules for digital modules with 16 or 32 channels.
The connection modules can be connected by means of the
connecting cables.
Up to 2 or 4 shielded connecting cables can be connected to the
front connector modules for one analog connection module
each with 20-pole or 40-pole connection.
The potential can be applied at the connection module or the
front connector module.

Technical specifications
Technical data of front connector module
Rated operating voltage

24 VDC

Max. permissible operating voltage

60 V DC

Max. permissible continuous

current
per connector pin

1A

Max. permissible summation

current

4 A/byte

Permissible ambient temperature

0 to + 60C

Test voltage

0.5 kV, 50 Hz, 60 sec.

Air gaps and creepage distances

IEC 664 (1980),

IEC 664 A (1981),
in accordance with
DIN VDE 0110 (01.89),
overvoltage class II,
pollution degree 2

Siemens KT 10.2 2011

2/15

Kap02-4_Fully modular-2.fm Seite 16 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Technical specifications (continued)

Front connector module SIMATIC TOP connect, connection for potential infeed
Modules up to 4 connections
Spring connection

Screw connection

Connectable cable cross-sections

solid cables

No

flexible cables with/without wire end ferrule

0.25 to 1.5 mm2

Number of wires per connection

1 or a combination of 2 conductors up to 1.5 mm2 (total) in a common wire end ferrule

Max. diameter of the cable insulation

3.1 mm

Stripping length of the cables

without insulating collar

6 mm

with insulating collar

Wire-end ferrules in acc. with DIN 46228

without insulating collar

Form A; 5 to 7 mm long

with insulating collar 0.25 to 1.0 mm2

with insulating collar 1.5 mm2

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

0.4 to 0.7 Nm

Spring connection

Screw connection

Modules up to 8 connections
Connectable cable cross-sections
solid cables

No

flexible cables with/without wire end ferrule

0.25 to 0.75 mm2

Number of wires per connection

1 or a combination of 2 wires up to 0.75 mm2 (total) in a common wire end ferrule

Max. diameter of the cable insulation

2.0 mm

Stripping length of the cables

without insulating collar

6 mm

with insulating collar

Wire-end ferrules in acc. with DIN 46228

without insulating collar

Form A; 5 to 7 mm long

with insulating collar 0.25 to 1.0 mm2

with insulating collar 1.5 mm2

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

2/16

Siemens KT 10.2 2011

0.4 to 0.7 Nm

Kap02-4_Fully modular-2.fm Seite 17 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Selection and ordering Data

Designation

Dimensional drawings
Order No.

Front connector module

(compact CPU 312C)
Power supply via
Screw terminals

6ES7921-3AK20-0AA0

Front connector module

(compact CPU 313C/
314C-2PtP/314C-2DP), slot X1

Terminal assignment for the wiring of the 32-channel front

connector module for digital modules and compact CPUs for
the X2 interface
Refers to the following order numbers:
6ES7921-3AA20-0AA0
6ES7921-3AB20-0AA0

Power supply via

Screw terminals

6ES7921-3AM20-0AA0

Front connector module

(digital 2 x 8 I/O)
Power supply via
Spring-loaded terminals

6ES7921-3AA00-0AA0 1)

Screw terminals

6ES7921-3AB00-0AA0 1)

Opening for
conductor to be
connected

Opening for
screwdriver

+
+
-

Supply
connections for 3

Supply
connections for 1

Front connector module

(digital 4 x 8 I/O)

Power supply via

Spring-loaded terminals

6ES7921-3AA20-0AA0

Screw terminals

6ES7921-3AB20-0AA0

Front connector module

(1 x 8 outputs) for 2 ampere
digital outputs
Power supply via
Spring-loaded terminals

6ES7921-3AC00-0AA0 1)

Screw terminals

6ES7921-3AD00-0AA0 1)

Front connector module 20-pin

(analog)

Supply
connections for 2

Power supply via

Spring-loaded terminals

6ES7921-3AF00-0AA0 2)

Screw terminals

6ES7921-3AG00-0AA0 2)

Front connector module 40-pin

(analog)

Supply
connections for 4

+
+
-

5
G-KT01_EN_00100a

Power supply via

Spring-loaded terminals

6ES7921-3AF20-0AA0 2)

Screw terminals

6ES7921-3AG20-0AA0 2)

1) The terminal assignments of these front connector modules

are unambiguous, so dimension drawings can be omitted.
2) The dimension drawings for these front connector modules
can be found under "Wiring of S7-300 analog modules".

Legend:
5 openings for strain relief device
1 to 4: round-sheath ribbon cable connections
See the following table for address assignment

Front view of the front connector module for 32-channel digital modules
and compact CPUs for the X2 interface

The connections for the supply voltage are shown as spring terminals. These are also available as screw version.
In the table below you can use the address assignment to find
the allocation of the respective connecting cable connections to
the channels of the signal modules.
Assignment of the connecting cable connections to the address
bytes of the 32-channel digital modules and compact CPUs for the
X2 interface
Connecting
cable connection

Address assignment for

Digital input
module

Digital output
module

Digital input/output module and

compact CPU
X2 interface

EB x

AB x

EB x

EB (x+1)

AB (x+1)

EB (x+1)

EB (x+2)

AB (x+2)

AB x

EB (x+3)

AB (x+3)

AB (x+1)

Siemens KT 10.2 2011

2/17

Kap02-4_Fully modular-2.fm Seite 18 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Dimensional drawings (continued)

Terminal assignment for the wiring of the front connector
module (X1) for the compact CPU 312C

Terminal assignment for the wiring of the front connector

module (X1) for the compact CPU 313C, 314C-2PtP, 314C-2DP

Refers to the following order number:

6ES7921-3AK20-0AA0

Refers to the following order number:

6ES7921-3AM20-0AA0

Opening for
screwdriver

+
+
-

Opening for
conductor to be
connected

Supply
connections for 1
and 2

Supply
connections for 1
and 2

Opening for
conductor to be
connected

Opening for
screwdriver

+
+
-

Supply
connections for 3

Supply
connections for 1
and 2

Supply
connections for 3

Supply
connections for 3

+
+
-

G_KT01_EN_00101a

Legend:
5 openings for strain relief device
1 to 3: round-sheath ribbon cable connections
See the following table for address assignment
Supply connections for 1 and 2 are internally bridged.
Supply connections for 3 are internally bridged.

5
G_KT01_EN_00102a

Legend:
5 openings for strain relief device
1 to 3: round-sheath ribbon cable connections
See the following table for address assignment

Front view of the front connector module (X1)

for the compact CPU 312C

Front view of the front connector module (X1)

for the compact CPU 313C, 314C-2PtP, 314C-2DP

The connections for the supply voltage are shown as spring terminals. These are only available as screw version.

The connections for the supply voltage are shown as spring terminals. These are only available as screw version.

In the table below you can use the address assignment (X1) to
find the allocation of the respective connecting cable connections to the channels of the compact CPU 312C.

In the table below you can use the address assignment (X1) to
find the allocation of the respective connecting cable connections to the channels of the compact CPU.

Assignment of the connecting cable connections to the address

bytes (X1) of the compact CPU 312C

Assignment of the connecting cable connections to the address

bytes (X1) of the compact CPU 313C, 314C-2PtP, 314C-2DP

Connecting cable interface

Address assignment (X1) for the

compact CPU 312C

Connecting cable interface

Address assignment (X1) for the

compact CPU

EB x

PEW x+0; PEW x+2; PEW x+4

EB (x+1)

AB x

PEW x+6; PEW x+8; PAW x+0;

PAW x+2

EB x

2/18

Siemens KT 10.2 2011

Kap02-4_Fully modular-2.fm Seite 19 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Schematics
S7-300, CPU312C
Front connector module with potential infeed via
screw connection 6ES7921-3AK20-0AA0

4 0

3 9

3 8

3 7

3 6

3 5

3 4

3 3

3 2

3 1

3 0

2 8

2 9

2 6

2 7

2 4

2 5

2 2

2 3

2 0

2 1

1 9

1 8

1 6

1 7

1 5

1 4

1 3

1 2

1 0

1 1

8
9

6
7

4
5

2
3

1
+
+
-

3
2

5
4

7
6

9
8

1 1

1 0

1 2

1 3

1 5

1 4

1 6

1
2

5
4

7
6

9
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

3
2

5
4

7
6

9
8

1 1

1 0

1 3

1 2

1 4

1 5

1 6

S7-300, CPU313C/314C-2PtP/314C-2DP
Front connector module with potential infeed via
screw connection 6ES7921-3AM20-0AA0

Analog section

Digital section

4 0

3 9

3 8

3 7

3 6

3 5

3 4

3 3

3 2

3 1

3 0

2 9

2 8

2 6

2 7

2 4

2 5

2 3

2 2

2 0

2 1

1 9

1 8

1 7

1 6

1 4

1 5

1 3

1 2

1 1

1 0

8
9

6
7

4
5

2
3

+
+

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Siemens KT 10.2 2011

2/19

Kap02-4_Fully modular-2.fm Seite 20 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Schematics
S7-300, digital 2 x 8 I/O
Front connector module with potential infeed via
spring connection
6ES7921-3AA00-0AA0
screw connection
6ES7921-3AB00-0AA0

2 0

1 9

1 8

1 7

1 6

1 4

1 5

1 3

1 2

1 1

1 0

8
9

6
7

4
5

2
3

+
-

3
2

5
4

7
6

9
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

3
2

5
4

7
6

9
8

1 1

1 0

1 3

1 2

1 5

1 4

1 6

S7-300, digital 4 x 8 I/O

Front connector module with potential infeed via
spring connection
6ES7921-3AA20-0AA0
screw connection
6ES7921-3AB20-0AA0

4 0

3 9

3 8

3 7

3 6

3 4

3 5

3 3

3 2

3 1

3 0

2 9

2 8

2 6

2 7

2 4

2 5

2 3

2 2

2 0

2 1

1 9

1 8

1 7

1 6

1 4

1 5

1 3

1 2

1 1

1 0

8
9

6
7

4
5

2
3

+
+
-

+
+
-

2/20

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

Siemens KT 10.2 2011

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Kap02-4_Fully modular-2.fm Seite 21 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Schematics
S7-300, 2 ampere digital 1 x 8 O
Front connector module with potential infeed via
spring connection
6ES7921-3AC00-0AA0
screw connection
6ES7921-3AD00-0AA0

2 0

1 8

1 9

1 7

1 6

1 5

1 4

1 2

1 3

1 1

1 0

8
9

6
7

4
5

2
3

+
+
-

3
2

5
4

7
6

9
8

1 1

1 0

1 3

1 2

1 5

1 4

1 6

S7-300, analog 20-pole I/O module

Front connector module with potential infeed via
spring connection
6ES7921-3AF00-0AA0
screw connection
6ES7921-3AG00-0AA0

2 0

1 9

1 8

1 7

1 6

1 4

1 5

1 3

1 2

1 1

1 0

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Siemens KT 10.2 2011

2/21

Kap02-4_Fully modular-2.fm Seite 22 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-300 front connector modules

Schematics
S7-300, analog 40-pole I/O module
Front connector module with potential infeed via
spring connection
6ES7921-3AF20-0AA0
screw connection
6ES7921-3AG20-0AA0

4 0

3 9

3 8

3 7

3 6

3 4

3 5

3 3

3 2

3 1

3 0

2 9

2 8

2 6

2 7

2 4

2 5

2 3

2 2

2 0

2 1

1 9

1 8

1 7

1 6

1 4

1 5

1 3

1 2

1 1

1 0

8
9

6
7

4
5

2
3

2 1
1

2 0

4 0

2/22

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

Siemens KT 10.2 2011

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Kap02-4_Fully modular-2.fm Seite 23 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-400 front connector modules

Design

Integration
For the connection to the signal module the front connector module is connected to the signal module instead of the SIMATIC
S7-400 front connector. It has 2 to 4-pin connectors for the connection of the connecting cables and up to 3 connections for the
potential infeed. There are several versions for the connection of
the digital 24 V/0.5 A I/O signals, for digital 24 V/2 A output modules and for analog I/O modules.
Use with SIMATIC S7-400 components
The front connector modules replace the standard SIMATIC
connectors
6ES7492-1AL00-0AA0
6ES7492-1BL00-0AA0
6ES7492-1CL00-0AA0
The circuit diagrams for the front connector modules
(module on top - IDC connector below) can also be found
under Circuit diagrams.

Technical specifications
Technical data of front connector module

Up to 2 connecting cables or one 2 x 16-pole flat round-sheath

ribbon cable can be connected to the front connector modules
for digital modules (version 2 A) with 16 channels, up to 4 connecting cables or two 2 x 16-pole flat round cables can be connected to the front connector modules for digital modules with
32 channels. The connection modules can be connected by
means of the connection cables.
Up to 4 shielded connecting cables can be connected to the
front connector modules for analog modules with one analog
connection module each.
The potential infeed can be applied at the connection module or
the front connector module.

Rated operating voltage

24 V DC

Max. permissible operating voltage

60 V DC

Max. permissible continuous

current
per connector pin

1A

Max. permissible summation

current

4 A/byte (power supply)

Permissible ambient temperature

0 to + 60 C

Test voltage

0.5 kV, 50 Hz, 60 s

Air gaps and creepage distances

IEC 664 (1980),

IEC 664 A (1981),
in accordance with
DIN VDE 0110 (01.89),
overvoltage class II,
pollution degree 2

Siemens KT 10.2 2011

2/23

Kap02-4_Fully modular-2.fm Seite 24 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-400 front connector modules

Technical specifications (continued)

Wiring rules for the front connector modules SIMATIC TOP connect, connection for potential supply
Modules up to 4 connections
Screw connection
Connectable cable cross-section

solid cables

No

flexible cables with/without wire end ferrule

0.25 to 1.5 mm2

Number of cables per connection

1 or a combination of 2 conductors up to 1.5 mm2 (total) in a common wire end ferrule

Max. diameter of the cable insulation

3.1 mm

Stripping length of the cables

without insulating collar

6 mm

with insulating collar

Wire-end ferrules to DIN 46228

without insulating collar

Form A; 5 to 7 mm long

with insulating collar 0.25 to 1.0 mm2

with insulating collar 1.5 mm2

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

0.4 to 0.7 Nm

Modules up to 64 connections
Screw connection
Connectable cable cross-sections
solid cables

No

flexible cables with/without wire end ferrule

0.25 to 0.75 mm2

Number of cables per connection

1 or a combination of 2 conductors up to 0.75 mm2 (total) in a common wire end ferrule

Max. diameter of the cable insulation

2.0 mm

Stripping length of the wires

without insulating collar

6 mm

with insulating collar

Wire-end ferrules to DIN 46228

without insulating collar

Form A; 5 to 7 mm long

with insulating collar 0.25 to 1.0 mm2

with insulating collar 1.5 mm2

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

0.4 to 0.7 Nm

Selection and ordering data

Designation

Order No.

Front connector module

(digital 4 x 8 I/O)
Voltage infeed via
Screw terminals

6ES7921-4AB00-0AA0

Front connector module

(2 x 8 outputs) for 2 ampere
digital outputs
Voltage infeed via
Screw terminals

6ES7921-4AD00-0AA0

Front connector module

(analog)
Voltage infeed via
Screw terminals

2/24

Siemens KT 10.2 2011

6ES7921-4AG00-0AA0

Kap02-4_Fully modular-2.fm Seite 25 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-400 front connector modules

Schematics
S7-400, digital 4 x 8 I/O
Front connector module with potential infeed via
screw connection 6ES7921-4AB00-0AA0

2
4 8

4 6

4 7

4 4

4 5

4 2

4 3

4 1

4 0

3 8

3 9

3 7

3 6

3 4

3 5

3 2

3 3

3 0

3 1

2 8

2 9

2 6

2 7

2 5

2 4

2 2

2 3

2 0

2 1

1 8

1 9

1 7

1 6

1 5

1 4

1 2

1 3

1 0

1 1

8
9

6
7

4
5

2
3

+
+
+
-

3
2

5
4

7
6

9
8

1 1

1 0

1 3

1 2

1 4

1 5

1 6

3
2

5
4

7
6

9
8

1 1

1 0

1 2

1 3

1 4

1 5

1 6

3
4

5
6

9
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

3
2

7
6

1 1

1 0

1 2

1 3

1 5

1 4

1 6

S7-400, 2 ampere digital 2 x 8 O

Front connector module with potential infeed
via screw connection 6ES7921-4AD00-0AA0

4 8

4 6

4 7

4 4

4 5

4 2

4 3

4 1

4 0

3 9

3 8

3 7

3 6

3 4

3 5

3 2

3 3

3 1

3 0

2 9

2 8

2 6

2 7

2 5

2 4

2 3

2 2

2 1

2 0

1 9

1 8

1 7

1 6

1 5

1 4

1 3

1 2

1 1

1 0
9

8
7

6
5

4
3

2
1

+
+
+
-

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Siemens KT 10.2 2011

2/25

Kap02-4_Fully modular-2.fm Seite 26 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Front connector modules
S7-400 front connector modules

Schematics
S7-400, analog 48-pole I/O module
Front connector module with potential infeed
via screw connection 6ES7921-4AG00-0AA0

2
4 8

4 6

4 7

4 4

4 5

4 2

4 3

4 1

4 0

3 9

3 8

3 7

3 6

3 4

3 5

3 2

3 3

3 0

3 1

2 8

2 9

2 6

2 7

2 5

2 4

2 2

2 3

2 0

2 1

1 8

1 9

1 7

1 6

1 5

1 4

1 2

1 3

1 0

1 1

8
9

6
7

4
5

2
3

+
2 5
2 6

2/26

3
4

5
6

7
8

1 0

1 1

Siemens KT 10.2 2011

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1
2

3
4

5
6

7
8

1 0

1 1

1 2

1 3

1 4

1 5

1 6

Kap02-4_Fully modular-2.fm Seite 27 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connecting cables
Connecting cables

Overview

Design
The pre-assembled round cable consists of 16 individual
cores with a cable cross-section of 0.14 mm2. Both ends are
prepared with an insulation displacement connector. The
round cable is available in unshielded and shielded versions
in different lengths.
The round-sheath ribbon cable is only available by the meter
and is assembled by the user with the help of a crimping tool
(to be ordered separately). This cable can be stripped at any
point and is easy to assemble with the available insulation displacement connector. The round-sheath ribbon cable consists
of a 16-pole flat cable with a cross-section of 0.14 mm2. It is
available as a 16-pole shielded/unshielded version and as a 2
x 16-pole unshielded version in lengths of 30 m and 60 m.

Technical specifications
Technical data of connecting cable from SIMATIC S7 to
connection module

The connection cable is the linking element between the front

connector module and the connection module. It transmits 8
signals and the supply voltage. The maximum bridgeable distance is 30 m. The connecting cable is available in two different
versions:
The pre-assembled round cable
The round-sheath ribbon cable assembled by the user

Operating voltage

60 V DC

Continuous current per signal

conductor

1A

Max. summation current

4 A/byte

Operating temperature

0 to +60C

Outer diameter of pre-assembled

round cable in mm,
unshielded/shielded

Approx. 6.5/7.0

Outer diameter of round-sheath

ribbon cable in mm ,
16-pole/2 x 16-pole

Approx. 9.5/11.5

Benefits
The pre-assembled round cables offer the following benefits:
The round cable is ready for use and just has to be plugged
in. (plug and play)
The components of the round cable have UL/CSA approval for
the North-American market.
As usual, this cable is available in a shielded version.
The round-sheath ribbon cables to be assembled by the user
offer the following benefits:
The round-sheath ribbon cable is available with a 16-pole flat
cable or two 16-pole flat cables. The signals can be transmitted by byte or word.
The round-sheath ribbon cable can be stripped at any point
(unbonded) so the inner flat cable is ready for further processing after stripping.
The round-sheath ribbon cable always allows laying of optimal
lengths.
The outer sheath of the round-sheath ribbon cable provides
this cable with higher mechanical protection than an unsheathed flat cable, while still retaining its flexibility
(easy to lay).
The round-sheath ribbon cable can be assembled by machine (the cable can be stripped by machine and the insulation displacement connectors can be attached by machine).
The 16-pole round-sheath ribbon cable is also available in a
shielded version.

Siemens KT 10.2 2011

2/27

 Siemens AG 2010

Fully modular connection

Connecting cables
Connecting cables

Selection and ordering Data

Designation

Order No.

Pre-assembled round cable

16-pole, 0.14 mm 2
unshielded

0.5 m

6ES7923-0BA50-0CB0

1.0 m

6ES7923-0BB00-0CB0

1.5 m

6ES7923-0BB50-0CB0

2.0 m

6ES7923-0BC00-0CB0

2.5 m

6ES7923-0BC50-0CB0

3.0 m

6ES7923-0BD00-0CB0

4.0

6ES7923-0BE00-0CB0

5.0 m

6ES7923-0BF00-0CB0

shielded
1.0 m

6ES7923-0BB00-0DB0

2.0 m

6ES7923-0BC00-0DB0

2.5 m

6ES7923-0BC50-0DB0

3.0 m

6ES7923-0BD00-0DB0

4.0 m

6ES7923-0BE00-0DB0

5.0 m

6ES7923-0BF00-0DB0

Round-sheath ribbon cable

16-pole, 0.14 mm 2
unshielded
30 m

6ES7923-0CD00-0AA0

60 m

6ES7923-0CG00-0AA0

shielded
30 m

6ES7923-0CD00-0BA0

60 m

6ES7923-0CG00-0BA0

Round-sheath ribbon cable

2 x 16-pole, 0.14 mm 2
unshielded
30 m

6ES7923-2CD00-0AA0

60 m

6ES7923-2CG00-0AA0

Accessories
Crimping tool

6ES7928-0AA00-0AA0

For processing the connectors

(female ribbon cable connector)
Female ribbon connector
(16-pole)
Insulation displacement system
with cable grips
package unit:
8 connectors and 8 cable grips

2/28

Siemens KT 10.2 2011

6ES7921-3BE10-0AA0

Kap02-4_Fully modular-2.fm Seite 29 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Overview

Overview

The connection modules form the interface between the I/O connecting cables from the field and the SIMATIC S7-300/400.
They allow simple and secure connection of almost all SIMATIC
S7-300/400 programmable controllers.
Connection to front connector modules
For connecting to the front connector modules, one connecting
cable is used per byte or per analog terminal module. In the
case of the 2 x 16-pole round-sheath ribbon cable, two bytes
can be connected. Up to 4 terminal modules are connected via
the connecting cables, depending on the front connector module. Up to 8 signal channels are run via the 16-pole connecting
cable.
Connection modules
There is a choice of different connection concepts with associated connection modules. The connection modules are latched
onto the mounting rail in place of terminal strips or coupling
modules. Passive and active connection modules (function
modules) are available. The function modules are fitted with coupling elements. The I/O terminals on the connection module are
available with spring-loaded or screw-type terminals. The digital
connection modules are optionally available with LEDs. The yellow LEDs on the connection module are assigned to every signal
path, and these LEDs indicate the signal state "active high".
The power supply is indicated by a green LED.
Distance
There can be a distance of up to 30 m between the SIMATIC S7
and the connection modules. This depends on the requirements
in each case and is at the discretion of the configuring engineer.
Accessories
Plug-in or self-adhesive labeling plates are available for individual and unique system labeling of the connection modules.
These labeling plates can be printed by machine and are suitable both for the basic modules and the signal and function
modules.

Siemens KT 10.2 2011

2/29

Kap02-4_Fully modular-2.fm Seite 30 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Overview

Terminal assignment of the connection module (TP3)

for 3-wire initiators
Front view of the connection
module

Terminal assignment
Top row
Terminals 0 to 7: Inputs/outputs
x.0 to x.7
Middle row
All terminals: M potential
Bottom row
All terminals: L+ potential

Terminal assignment of the connection module (TP2)

for 2 A modules
In the case of the basic module, the connection modules are
used with basic functionality. Here, the I/O signal is connected
quickly and simply from the field to the module or from the module to the field.

Front view of the connection

module

The connection terminals for the I/O signals are designed as

screw terminals or spring terminals. The connection modules are
available for digital and analog signals.

Design
Below is an overview of the terminal layout of the terminal modules for the wiring.

Terminal assignment
left

right

Top row
Terminals 0 to
3: Outputs x.0
to x.3
Middle row
Terminals 0 to
3: Potential M1
for x.0 to x.3
Bottom row
2 terminals
Interface for M1

Top row
Terminals 0 to
3: Outputs x.4
to x.7
Middle row
Terminals 0 to
3: Potential M2
for x.4 to x.7
Bottom row
2 terminals
Interface for M2

Terminal assignment of the connection module (TP1)

for 1-wire initiators
Front view of the connection
module

Terminal assignment
Top row
Terminals 0 to 7: Inputs/outputs
x.0 to x.7
Bottom row
2 terminals L+ and 2 terminals M
potential

Terminal assignment of the connection module (TPK)

for 1-wire initiators
Front view of the connection module

Terminal assignment
Top row
2 x terminals 0 to 7:
Inputs/outputs
x.0 to x.7
Bottom row
2 x 2 terminals L+
and 2 terminals M
potential

2/30

Siemens KT 10.2 2011

Terminal assignment of the connection module (TPA)

for analog modules
Front view of the connection
module

Terminal assignment
Top row
Terminals A to K: Analog signals
or compensation interface
Middle row
Terminal Y: L+ potential
Terminal Z: M potential
Terminals A and K: Compensation interface
Bottom row
You can use the 2 x 5 terminals Z
and Y for multiplying any potentials and signals.

Kap02-4_Fully modular-2.fm Seite 31 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Integration

Technical specifications

Connection module for 1-wire initiators (TP1)

Connection module TP1, TP3 and TPK

If the frame potential of the individual sensors/actuators is not

run individually to the connection module, the connection module for 1-wire connection with eight signal connections is used.
Two frame potential connections and two positive potential connections are available for potential infeed of the I/O module.

Max. operating voltage

60 V DC

Continuous current per signal

1A

Max. summation current (voltage

infeed)

4 A/byte

Operating temperature

0 to + 60C

Mounting position

Any

Air gaps and creepage distances

IEC Report 664, IEC 664 A,

IEC 1131 T2, CSA C22.2 No 142
UL 508, VDE 0160 (12.90), overvoltage category II, pollution
degree 3

Connection module for 3-wire initiators (TP3)

The connection module for 3-wire initiators provides the user
with 8 signal connections, 10 frame potential connections and
10 positive potential connections. This provides sufficient reserves for potential bridges and infeeds.
Connection module for 2 x 8 signals (TPK)

Dimensions (W x H x D) in mm

If a connection module for 1-wire connection with two bytes is required, the compact connection module TPK is used. It is connected to the front connector module using two connection cables. This compact connection module comprises 2 x 8
terminals for the signals, and there are 2 x 2 frame potential connections and 2 x 2 positive potential connections available to the
user.
Connection module for 2 A output modules (TP2)
The 2-ampere modules of the SIMATIC S7 can be connected to
the connection module specially designed for these modules.
Connection module for analog signals (TPA)
A special connection module for analog signals is available here
for the analog signals of the SIMATIC S7. With the connection
module, signals can be connected extremely easily and comfortably. The shield connection of the signal cables is possible
using an optional shield plate with the associated shield connection terminals.

1-wire connection
6ES7924-0AA10-0A_0

Approx. 55 x 43.2 x 63

for 3-wire initiators

6ES7924-0CA10-0A_0

Approx. 68 x 43.2 x 80

for 2 x 8 signals
6ES7924-1AA10-0A_0

Approx. 100 x 43.2 x 80

Connection module TP2

Max. operating voltage

60 V DC

Continuous current signal conductor

2A

Operating temperature

0 to + 60C

Mounting position

Any

Air gaps and creepage distances

IEC Report 664, IEC 664 A, IEC

1131 T2, CSA C22.2 No 142 UL
508, VDE 0160 (12.90), overvoltage category II, pollution degree 3

Special attention should be given to the following:

Dimensions (W x H x D) in mm

All the cores of the connecting cable are required for transferring
the signals of the 2 A modules. For this reason, the voltage supply of the module must be cabled separately.

for 2 ampere modules

6ES7924-0BB10-0A_0

You can find the circuit diagrams of the connection modules under Circuit diagrams.
Note: See under "Configuring and wiring" for mounting of a
round-sheath ribbon cable on the 16-pole connector.

Approx. 68 x 43.2 x 80

Connection module TPA

Max. operating voltage

60 V DC

Continuous current signal conductor

1A

Operating temperature

0 to + 60C

Mounting position

Any

Air gaps and creepage distances

IEC Report 664, IEC 664 A, IEC

1131 T2, CSA C22.2 No 142 UL
508, VDE 0160 (12.90), overvoltage category II, pollution degree 3

Dimensions (W x H x D) in mm
for 2 analog modules
6ES7924-0CC10-0A_0

Approx. 68 x 43.2 x 80

Wiring rules for the connection modules TPA, TP1, TP2, TP3, TPK
Spring connection

Screw connection

Connectable cable cross-sections

solid cables

No

flexible cables without wire end ferrule

0.5 to 2.5 mm2

flexible cables with wire end ferrule in accordance with DIN 46228/1

0.5 to 1.5 mm2

flexible cables with wire end ferrule and plastic

collar in accordance with DIN 46228/4

0.5 to 1.5 mm2

Number of cables per connection

1 or a combination of 2 cables up to the cross-sections specified above(total) in a shared wire

end ferrule

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

0.5 to 2.5 mm2 (2.5 mm2 with a crimp in accordance with EN 60947-1)

0.4 to 0.7 Nm
Siemens KT 10.2 2011

2/31

Kap02-4_Fully modular-2.fm Seite 32 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Selection and ordering data

Designation

Order No.

Connection module TP1

for 1-wire initiators
Packaging unit (1 unit)
Spring terminals

6ES7924-0AA10-0AB0

Screw terminals

6ES7924-0AA10-0AA0

Connection module TP3

for 3-wire initiators

Packaging unit (1 unit)
Spring terminals

6ES7924-0CA10-0AB0

Screw terminals

6ES7924-0CA10-0AA0

Connection module TPK

for 2 x 8 signals
Packaging unit (1 unit)
Spring terminals

6ES7924-1AA10-0AB0

Screw terminals

6ES7924-1AA10-0AA0

Connection module TP2

for 2 A modules
for 2-wire initiators
Packaging unit (1 unit)
Spring terminals

6ES7924-0BB10-0AB0

Screw terminals

6ES7924-0BB10-0AA0

Connection module TPA

for analog signals
Packaging unit (1 unit)
Spring terminals

6ES7924-0CC10-0AB0

Screw terminals

6ES7924-0CC10-0AA0

Accessories
Labeling plates
for connection modules
Insertable labeling plate
PU = 200 units

6ES7928-2AB00-0AA0

Self-adhesive labeling plate

PU = 200 units

6ES7928-2BB00-0AA0

Shield plate

6ES7928-1BA00-0AA0

for analog connection module

(4 units)
Shield connection terminal
for shield plate, 2 units, with cable
diameter
2 to 6 mm (2 cables)

6ES7390-5AB00-0AA0

3 to 8 mm

6ES7390-5BA00-0AA0

4 to 13 mm

6ES7390-5CA00-0AA0

2/32

Siemens KT 10.2 2011

Kap02-4_Fully modular-2.fm Seite 33 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Schematics
Connection module TP1
8 I/O, spring connection
6ES7924-0AA10-0AB0 or
8 I/O, screw connection
6ES7924-0AA10-0AA0

1 0

1 2

1 1

1 3

1 4

1 5

1 6

1 0

1 2

1 1

1 3

1 4

1 5

1 6

L +

L +

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

Connection module TP3

8 I/O, spring connection
6ES7924-0CA10-0AB0 or
8 I/O, screw connection
6ES7924-0CA10-0AA0

Siemens KT 10.2 2011

2/33

Kap02-4_Fully modular-2.fm Seite 34 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Schematics
Connection module TPK
2 x 8 I/O, spring connection
6ES7924-1AA10-0AB0 or
2 x 8 I/O, screw connection
6ES7924-1AA10-0AA0

1 0

1 2

1 1

L +

B 1 .7
B 1 .6
B 1 .5
B 1 .4
B 1 .3
B 1 .2
B 1 .1
B 1 .0

2/34

Siemens KT 10.2 2011

1 3

1 4

1 5

1 6

1 0

1 2

1 1

L +

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

1 3

1 4

1 5

1 6

Kap02-4_Fully modular-2.fm Seite 35 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Basic modules

Schematics
Connection module TP2
8 outputs, spring connection
6ES7924-0BB10-0AB0 or
8 outputs, screw connection
6ES7924-0BB10-0AA0

1 0

1 2

1 1

1 3

1 4

1 5

1 6

4
3

Z
3

8
7

A
A

1 0
9

G
H

1 2

1 1

1 3

B
C

1 5

1 6

Y
K

1 4

Z
M

6
5

I
K

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

Connection module TPA

analog I/O, spring connection
6ES7924-0CC10-0AB0 or
analog I/O, screw connection
6ES7924-0CC10-0AA0

Z
G

Y
E

Y
D

Y
B

Y
A

Siemens KT 10.2 2011

2/35

Kap02-4_Fully modular-2.fm Seite 36 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Signal modules

Overview

Terminal assignment of the connection module (TPK) with

LED for 1-wire initiators
Front view of the connection module

Terminal assignment
LEDs for indicating
Top row
2 x terminals 0 to 7:
Inputs/outputs x.0
to x.7
Bottom row
2 x 2 terminals L+
and 2 x 2 terminals
M potential

Terminal assignment of the connection module (TP3) with

LED for 3-wire initiators
Front view of the connection
module

Terminal assignment
LEDs for indicating
Top row
Terminals 0 to 7: Inputs/outputs
x.0 to x.7
Middle row
All terminals: M potential
Bottom row
All terminals L+ potential

In the case of the signal module, the digital connection modules

with LED are used. The yellow LEDs indicate the "active high"
signal of the individual channels. This makes commissioning
easier for you, and you always have an overview of the signal
states of your I/O. At the same time, a green LED indicates when
the 24 V DC is applied.
The connection terminals for the I/O signals are designed as
screw terminals or spring terminals. The connection modules are
available for digital signals.

Design
Below is an overview of the terminal layout of the connection
modules for the wiring:
Terminal assignment of the connection module (TP1) with
LED for 1-wire initiators

Terminal assignment of the connection module (TP2) with

LED for 2 A modules

Front view of the connection

module

Front view of the connection

module

Terminal assignment
LEDs for indicating
Top row
Terminals 0 to 7: Inputs/outputs
x.0 to x.7
Bottom row
2 terminals L+ and 2 terminals M
potential

2/36

Siemens KT 10.2 2011

Terminal assignment
left

right

LEDs for indicating

Top row
Terminals 0 to
3: Outputs x.0
to x.3
Middle row
Terminals 0 to
3: Potential M1
for x.0 to x.3
Bottom row
2 terminals
Interface for M1

LEDs for indicating

Top row
Terminals 0 to
3: Outputs x.4
to x.7
Middle row
Terminals 0 to
3: Potential M2
for x.4 to x.7
Bottom row
2 terminals
Interface for M2

Kap02-4_Fully modular-2.fm Seite 37 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Signal modules

Integration

Technical specifications

Connection module for 1-wire initiators (TP1) with LED

Connection module TP1, TP3 and TPK with LED

If the frame potential of the individual sensors/actuators is not

run individually to the connection module, the compact connection module for 1-wire connection with 8 signal connections is
used. 2 frame potential connections and 2 positive potential connections are available for potential infeed of the I/O module.

Max. operating voltage

24 V DC

Continuous current per signal

1A

Max. summation current (voltage

infeed)

4 A/byte

Operating temperature

0 to + 60 C

Mounting position

Any

Air gaps and creepage distances

IEC Report 664, IEC 664 A,

IEC 1131 T2, CSA C22.2 No 142
UL 508, VDE 0160 (12.90), overvoltage category II,
pollution degree 3

Connection module for 3-wire initiators (TP3) with LED

The connection module for 3-wire initiators provides the user
with 8 signal connections, 10 frame potential connections and
10 positive potential connections. This provides sufficient reserves for potential bridges and infeeds.
Connection module for 2 x 8 signals (TPK) with LED
If a connection module for 1-wire connection with 2 bytes is required, the compact connection module TPK is used. It is connected to the front connector module using 2 connecting cables.
This compact connection module comprises 2 x 8 terminals for
the signals, and there are 2 x 2 frame potential connections and
2 x 2 positive potential connections available to the user.
Connection module for 2 A modules (TP2) with LED
The 2 ampere modules of the SIMATIC S7 can be connected to
the connection module specially designed for these modules.

Dimensions (W x H x D) in mm
1-wire connection with LED
6ES7924-0AA10-0B_0

Approx. 55 x 43.2 x 63

for 3-wire initiators with LED

6ES7924-0CA10-0B_0

Approx. 68 x 43.2 x 80

for 2 x 8 signals with LED

6ES7924-1AA10-0B_0

Approx. 100 x 43.2 x 80

Connection module TP2 with LED

Max. operating voltage

24 V DC

Special attention should be given to the following:

Continuous current per signal

conductor

2A

All the cores of the connection cable are required for transferring
the signals of the 2 A modules. For this reason, the voltage supply of the module must be cabled separately.

Operating temperature

0 to + 60 C

Mounting position

Any

For the LED display to function, the "connection module for 2 A

modules (TP2) with LED" must be supplied with frame potential.

Air gaps and creepage distances

IEC Report 664, IEC 664 A,

IEC 1131 T2, CSA C22.2 No 142
UL 508, VDE 0160 (12.90),
overvoltage category II,
pollution degree 3

You can also find the circuit diagrams of the connection modules
under Circuit diagrams.
Note: See under "Configuring and wiring" for mounting of a
round-sheath ribbon cable on the 16-pole connector.

Dimensions (W x H x D) in mm
for 2-ampere modules with LED
6ES7924-0BB10-0B_0

Approx. 68 x 43.2 x 80

Wiring rules for the connection modules TP1 LED, TPK LED, TP2 LED, TP3 LED
Spring connection

Screw connection

Connectable cable cross-sections

solid cables

No

flexible cables without wire end ferrule

0.5 to 2.5 mm2

flexible cables with wire end ferrule in accordance with DIN 46228/1

0.5 to 1.5 mm2

flexible cables with wire end ferrule and plastic

collar in accordance with DIN 46228/4

0.5 to 1.5 mm2

Number of wires per connection

0.5 to 2.5 mm2 (2.5 mm2 with a crimp in accordance with EN 60947-1)

1 or a combination of 2 conductors up to the cross-sections specified above (total) in a shared

wire end ferrule

Blade width of the screwdriver

3.5 mm (cylindrical shape)

Tightening torque for connecting the cables

0.4 to 0.7 Nm

Siemens KT 10.2 2011

2/37

Kap02-4_Fully modular-2.fm Seite 38 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Signal modules

Selection and ordering data

Designation

Order No.

Connection module TP1 with

LED
for 1-wire initiators
Packaging unit (1 unit)

Spring terminals

6ES7924-0AA10-0BB0

Screw terminals

6ES7924-0AA10-0BA0

Connection module TP3 with

LED
for 3-wire initiators
Packaging unit (1 unit)
Spring terminals

6ES7924-0CA10-0BB0

Screw terminals

6ES7924-0CA10-0BA0

Connection module TPK with

LED
for 2 x 8 signals
Packaging unit (1 unit)
Spring terminals

6ES7924-1AA10-0BB0

Screw terminals

6ES7924-1AA10-0BA0

Connection module TP2 with

LED
for 2 A modules
for 2-wire initiators
Packaging unit (1 unit)
Spring terminals

6ES7924-0BB10-0BB0

Screw terminals

6ES7924-0BB10-0BA0

Accessories
Labeling plates for connection
modules
Insertable labeling plate
PU = 200 units

6ES7928-2AB00-0AA0

Self-adhesive labeling plate

PU = 200 units

6ES7928-2BB00-0AA0

2/38

Siemens KT 10.2 2011

Kap02-4_Fully modular-2.fm Seite 39 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Signal modules

Schematics
Connection module TP1
8 I/O, spring connection with LEDs
6ES7924-0AA10-0BB0 or
8 I/O, screw connection with LEDs
6ES7924-0AA10-0BA0

1 0

1 2

1 1

1 3

1 4

1 5

1 6

1 0

1 2

1 1

1 3

1 4

1 5

1 6

L +

L +

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

Connection module TP3

8 I/O, spring connection with LEDs
6ES7924-0CA10-0BB0 or
8 I/O, screw connection with LEDs
6ES7924-0CA10-0BA0

Siemens KT 10.2 2011

2/39

Kap02-4_Fully modular-2.fm Seite 40 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Signal modules

Schematics
Connection module TPK
2 x 8 I/O, spring connection with LEDs
6ES7924-1AA10-0BB0 or
2 x 8 I/O, screw connection with LEDs
6ES7924-1AA10-0BA0

4
3

6
5

8
7

1 0

1 2

1 1

1 3

1 4

L +

1 5

1 6

4
3

6
5

8
7

1 0

1 2

1 1

1 3

1 4

1 5

1 6

1 0

1 2

1 1

L +

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

B 0 .7
B 0 .6
B 0 .5
B 0 .4
B 0 .3
B 0 .2
B 0 .1
B 0 .0

B 1 .7
B 1 .6
B 1 .5
B 1 .4
B 1 .3
B 1 .2
B 1 .1
B 1 .0

Connection module TP2

8 outputs, spring connection
with LEDs 6ES7924-0BB10-0BB0 or
8 outputs, screw connection
with LEDs 6ES7924-0BB10-0BA0

2/40

Siemens KT 10.2 2011

1 3

1 4

1 5

1 6

Kap02-4_Fully modular-2.fm Seite 41 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Overview

Design
Below is an overview of the terminal layout the connection
module for the wiring.
Terminal assignment of the connection modules
Front view of the TPRo connection module

Terminal assignment
2 x 2 terminals for
connecting 24 V DC
potential
LEDs for indicating
Relay with socket
Bottom row
Terminals 0 to 7:
Connection for the
field signals (outputs) in 2-wire technology

Front view of the TPOo optocoupler module

2 x 2 terminals for
connecting 24 V DC
potential
LEDs for indicating
Integrated optocouplers
Bottom row
L2/L3 and M2/M3
for output potential
(4-grouping)
Terminals 0 to 7:
connections for the
field signals (outputs)
SF1/SF2 terminal for
group fault message

Function modules are implemented with digital connection modules fitted with relays or optocouplers.
If other voltage or power levels are required in the field, the connection module for output signals TPRo or TPOo is used. For the
TPRo connection module, relays are used for the implementation. For the TPOo connection module, optocouplers are used
for the implementation. This converts the 24 V DC output signal
simply and reliably to another voltage or power level. If 230 V AC
input signals have to be transmitted to the controller in the field,
a connection module with relay TPRi is available that converts
the 230 V AC signal simply to 24 V DC. This means you always
have the same voltage level on the module side.

Terminal assignment

Front view of the TPRi connection module

Terminal assignment
2 x 2 terminals for connecting 24 V DC potential
LEDs for indicating
Relay with socket
Bottom row
Terminals 0 to 7: Connection for the field signals (inputs) in 2-wire
technology

Siemens KT 10.2 2011

2/41

Kap02-4_Fully modular-2.fm Seite 42 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Function

Integration

The connection modules have been expanded by an optocoupler module (TPOo), which allows high loads up to 4 A for 24 V
to be quickly activated. The individual channels of the compact
module are overload-proof and short-circuit proof. The operating
statuses of the 8 channels are indicated by green and red LEDs.
If there is an error at an output, a group fault signaling contact is
activated.

Connection module with optocoupler (TPOo) for outputs

The connection terminals for the I/O signals are designed as

screw-type terminals or spring-loaded terminals.
The function modules with relays are equipped with LEDs for
indicating.

The individual channels of the compact module are overloadproof and short-circuit proof. If there is an error at an output, a
group fault signaling contact is activated. Potential supply to the
module can be made from the connection module or from the
front connector module.

The yellow LEDs indicate that 24 V DC is present at the relay coil

of the TPRo.

The operating statuses of the 8 channels are indicated by green

and red LEDs.

The yellow LED of the connection module with relay (TPRi) indicates that the relay contact has switched through the 24 V DC
for the module.

Connection module with relay (TPRo) for outputs

This makes commissioning easier for you, and you always have
an overview of the signal states of your I/O. At the same time, a
green LED indicates if the 24 V DC voltage for supplying the
module is present.
The connection terminals for the I/O signals are designed as
screw-type terminals or spring-loaded terminals.
The relays have sockets for both function modules with relays
and can be swapped in the event of a fault.
Use with optocouplers for the TPRo relay modules
If higher switching frequencies of the relay connection module
are required for the output signals, the relay can simply be replaced with an optocoupler (note technical specifications) in order to increase the switching frequency here.
Installation information for connection modules (TPRo) only
affects order numbers 6ES7924-0BD10-0BB0 and 6ES79240BD10-0BA0.
To protect the relay contacts, inductive loads must be dampened externally with an effective protective circuit. No measures
are provided for this in the TPR.
When using a relay (e.g. Nais APE 30024):
To cope with surge voltage values 2 kV, overvoltage protection
must be provided (e.g. Weidmller 940149 0000 DK4U 60 V
AC/85 V DC or equivalent).
Installation information for connection modules (TPRo and
TPOo) only affects order numbers 6ES7924-0BD100BB0/6ES7924-0BD10-0BA0 and 6ES7924-0BF100BA0/6ES7924-0BF10-0BB0.
When using optocouplers such as for TPOo or TPRo (e.g. Nais
AQE 34224 or Nais AQE 12124 for TPRo):
To cope with surge voltage values 1 kV, overvoltage protection
must be provided (e.g. Weidmller 940149 0000 DK4U 60 V
DC/85 V DC or equivalent).

2/42

Siemens KT 10.2 2011

If you want quick switching of high loads (up to 4 A) for 24 V DC

voltages between the output signals and the field signals, the
connection module with integrated optocoupler can be used.
On the connection module with optocoupler, 8 signal connections are available to the user for the field signals.

If you want to isolate or adapt a potential (e.g. 24 V DC to

230 V AC) between the output signals and the field signals, the
connection module with a relay can be used. On the connection
module with relay, the user has 8 signal connections in 2-wire
technology for the field signals. Potential supply to the module
can be made from the connection module or from the front connector module. The relays can be replaced by optocouplers.
The electrical values must be noted here. These relay connection modules are fitted with LEDs for optical signaling.
Connection module with relay (TPRi) for inputs
If you want to adapt a potential (e.g. 230 V AC to 24 V DC)
between the field signals and input signals, the connection
module with a relay is used. On the connection module with relay, the user has 8 signal connections in 2-wire technology for
the field signals. Potential supply to the module can be made
from the connection module or from the front connector module.
These relay connection modules are fitted with LEDs for optical
signaling.
You can find the circuit diagrams of the connection modules
under "Circuit diagrams".
Note: See "Configuring and wiring" for assembly of a roundsheath ribbon cable on the 16-pin connector.

Kap02-4_Fully modular-2.fm Seite 43 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Technical specifications
Connection module with relay for outputs (TPRo)

Switching frequency

max. 500 Hz with 4 A resistive

load (square wave voltage,
pulse/pause 1:1)

Energizing side
Operating voltage for coil

24 V DC

"Overload" fault indication

Input circuit

Reverse polarity protection and

freewheeling diodes

Red LED per channel, in case of

wire breakage or short-circuit

Wire break indication

ActiveIout < 0.1 A/inactiveIout

0.9 A

Contact side
Number of relay outputs

8 (NO contacts)

Group fault messages SF1, SF2

Contact design

Single contact, 1 NO contact

Monitored channels

Switching capacity (resistive load)

max. 4 A/250 V AC
max. 3 A/30 V DC
max. 0.6 A/48 V DC
max. 0.4 A/60 V DC
recommended min. load 10 mA

No error at the switching output

typ. UB 2 V

Wire break at the switching output

Approx. 0 V

20 cycles/minute

Short-circuit at the switching output

0 V to UB, clocked

Current ISF1, ISF2

min. 4 mA/max. 200 mA

Switching frequency
Service life
Mechanical

5 x 106 switching cycles

Electrical

3 x 104 operating cycles at 230 V

AC/2 A/ cos = 1

Operating temperature

0 ... +60 C

Mounting position

Any

Clearance and creepage distances Basic standard IEC 60664-1;

UL 508; Cul (Reference CSA C22.2
No. 142) Overvoltage category III,
Pollution degree 2
Dimensions (W x H x D) in mm
6ES7924-0BD10-0B_0

Approx. 100 x 45 x 80

Connection module with optocoupler for outputs (TPOo)

Input data
Power supply

SF1: Channels 0 ... 3, SF2: for

channels 4 ... 7

Voltage USF1, USF2

General data
Degree of protection

IP20

Operating temperature

0 ... 60 C

Mounting position

Any, except overhead

Connecting terminals

Screw-type or spring-loaded term.

Stripped length

9 mm

Conductor cross-section
Finely stranded without end sleeve

0.5 ... 2.5 mm2

with end sleeve for screw-type

terminals

0.5 ... 2.5 mm2 according to

DIN 46228-1

with end sleeve for spring-loaded

terminals

0.5 ... 1.5 mm2 according to

DIN 46228-1 and DIN 46228-4

Screwdriver

acc. to DIN 5264 B 0.6 x 3.5 mm

Potential connection (L1/M1)

24 V DC (20.4 ... 28.8 V DC)

Tightening torque of screw-type

terminals

0.4 Nm

Status indicator "L1"

Green LED

Weight

Approx. 400 g

Dimensions (W x H x D) in mm

134 x 84 x 77

Switching inputs
Number

8 channels (channel 0 ... 7) with

reverse polarity protection

1) Protected against polarity reversal, if the ground potential of the output

Input voltage "off"

0 V DC (0 ... 5 V DC)

2)

Input voltage "on"

24 V DC (15 ... 28.8 V DC)

Input current

min. 5 mA / 20 V DC, per channel

Status indicator "on"

Green LED per channel

Output data
Power supply
Operating voltage UB (L2/M2,
L3/M3)

24 V DC (20 ... 30 V DC) per group

of 4 one VB

U B conditionally protected against Up to 30 V DC

polarity reversal 1)
Current consumption

approx. 10 mA for 24 V DC + output currents per group of 4

Aggregate current

max. 8 A per group of 4

Switching outputs
Number

8 channels (channel 0 ... 7)

Short-circuit protection 2)

for UB < 24 V DC or 24 ... 30 V

DC/max. 20 A

Output voltage

typ. UB 1 V (for input "on")

Output current

Max. 4 A per channel

Lamp load

max. 20 W at 24 V per channel

Demand factor per group of 4

50 %, max. 2 outputs active under

full load (4 A)

Short-circuit response

Clocked output signal (approx.

2 ... 20 ms)

On/off-delay

typ. 100 s/250 s / resistive load

load is directly connected to the 0 V supply of the power supply unit

Not sustained short-circuit-proof, max. duration approx. 60 min.

Connection module with relay for inputs (TPRi)

Energizing side
Operating voltage for coil

230 V AC (207 ...280 V AC)

Input circuit

Varistors

Contact side
Number of relay outputs

8 (NO contacts)

Contact design

Single contact, 1 NO contact

Switching capacity (resistive load)

max. 50 A/24 V AC,

max. 50 mA/48 V DC
max. 50 mA/60 V DC
recommended min. load 5 mA

Switching frequency

200 cycles/minute

Service life
Mechanical

10 x 106 switching cycles

Electrical

3 x 106 operating cycles at 230

V AC/50 mA/cos = 1

Operating temperature

0 ... +60 C

Mounting position

Any

Clearance and creepage distances

Basic standard IEC 60664-1; UL

508; Cul (Reference CSA C22.2
No. 142) Overvoltage category
III, Pollution degree 2

Dimensions (W x H x D) in mm
6ES7924-0BE10-0B_0

ca. 130 x 45 x 80
Siemens KT 10.2 2011

2/43

Kap02-4_Fully modular-2.fm Seite 44 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Technical specifications (continued)

Wiring rules for the connection modules TPRo and TPRi
Spring-loaded connection

Screw-type connection

Connectable cable cross-sections

Solid conductors

No

Flexible cables without end sleeve

0.5 ... 2.5 mm2

Flexible cables with end sleeve according to

DIN 46228/1

0.5 ... 1.5 mm2

0.5 to 2.5 mm2 (2.5 mm2 with a crimp in accordance with EN 60947-1)

Flexible cables with end sleeve and plastic col- 0.5 ... 1.5 mm2
lar according to DIN 46228/4
Number of conductors per connection

1 or a combination of 2 conductors up to the cross-sections specified above (total) in a shared

end sleeve

Blade width of the screwdriver

3.5 mm (cylindrical design)

Tightening torque for connecting the cables

Selection and ordering data

Name

Order No.

Connection module TPRo for

output signals
for 2-wire connection
Packaging unit 1 unit
Spring-loaded terminals

6ES7924-0BD10-0BB0

Screw-type terminals

6ES7924-0BD10-0BA0

Connection module
optocoupler
Packaging unit 1 unit
Spring-loaded terminals

6ES7924-0BF10-0BB0

Screw-type terminals

6ES7924-0BF10-0BA0

Connection module TPRi for

input signals
for 2-wire connection
Packaging unit 1 unit
Spring-loaded terminals

6ES7924-0BE10-0BB0

Screw-type terminals

6ES7924-0BE10-0BA0

Accessories
Labels for connection modules
Insertable labels
PU = 200 units

6ES7928-2AB00-0AA0

Self-adhesive labels
PU = 200 units

6ES7928-2BB00-0AA0

Replacement relay for relay

connection module
PU = 4 units
Replacement relay for TPRi

6ES7928-3BA00-4AA0

Replacement relay for TPRo

6ES7928-3AA00-4AA0

Optocoupler DC alternative for

relay in the case of TPRo
PU = 4 units

6ES7928-3DA00-4AA0

Optocoupler AC alternative for

relay in the case of TPRo
PU = 4 units

6ES7928-3CA00-4AA0

2/44

Siemens KT 10.2 2011

0.4 ... 0.7 Nm

Kap02-4_Fully modular-2.fm Seite 45 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Schematics
Connection module TPRi
8 NO contacts with LEDs, spring connection
6ES7924-0BE10-0BB0 or
8 NO contacts with LEDs, screw connection
6ES7924-0BE10-0BA0

1 1

A 1

A 2

1 4

K 2
A 1

1 2

1 4

1 3

1 5

1 6

L + L +

1 1
A 2

1 4

K 1
A 1

6 '

5 '

1 4

K 7
A 1

1 1

1 4

1 1

1 4

A 2

K 6
A 1

A 2

K 5
A 1

1 1

1 4

K 0

A 2

1 1

3 '
4

1 4

1 1

A 1

1 3

1 4

1 6

1 5

A 2

1
4

6 '

K 6
4

2
5

K 0

2
5

K 1
5

1 '

2 '

K 7

7 '

1
4

0 '

K 5
4

5 '

2
5

4 '

K 4
4

B 0 .3
B 0 .3
B 0 .2
B 0 .2
B 0 .1
B 0 .1
B 0 .0
B 0 .0
B 0 .7
B 0 .7
B 0 .6
B 0 .6
B 0 .5
B 0 .5
B 0 .4
B 0 .4

'

'

'

'

4 '

K 2

'

1 2

L + L +

K 3

'

5 '

1 1

'

'

'

'

6 '

B 0 .3
B 0 .3
B 0 .2
B 0 .2
B 0 .1
B 0 .1
B 0 .0
B 0 .0

A 2

4 '

K 4

A 2

1 0

1 1

A 1

7 '

7 '

'

1 4

K 3

1 1

'

1 0

'

'

'

'

B 0 .7
B 0 .7
B 0 .6
B 0 .6
B 0 .5
B 0 .5
B 0 .4
B 0 .4

Connection module TPRo

8 NO contacts with LEDs, spring connection
6ES7924-0BD10-0BB0 or
8 NO contacts with LEDs, screw connection
6ES7924-0BD10-0BA0

Siemens KT 10.2 2011

2/45

Kap02-4_Fully modular-2.fm Seite 46 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Connection modules
Function module

Schematics (continued)
Optocoupler circuit diagram:
Connection module TPOo
8 NO with LED, spring connection
6ES7924-0BF10-0BB0 or
8 NOwith LED, screw connection
6ES7924-0BF10-0BA0

2
2
1

4
3

6
5

8
7

10
9

12
11

14
13

15

16

M1M1 L1L1

Rot

overload

Grn
on

S F1 M 2 M 2 3

L2 L2

Rot
overload

Grn
on

B3.7
B3.6
B3.5
B3.4
B3.3
B3.2
B3.1
B3.0

S F2 M 3 M 3 7

G_KT01_DE_00362

2/46

Siemens KT 10.2 2011

L3 L3

Kap02-4_Fully modular-2.fm Seite 47 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Mounting of round-sheath ribbon cable
and S7-300 connector

Integration
Preparation of round-sheath ribbon cables for mounting

Connection of round-sheath ribbon cable to 16-pole connector

The round-sheath ribbon cable is first cut to the required length

by the user prior to mounting.

The flat cable is threaded into the 16-pole connector. The socket
is fitted with a guide key. Pin 1 is marked with a triangle on the
side of the guide key.

Round-sheath ribbon cable 1 x 16-pole

For the 2 x 8 I/O front connector module (20-pole), the cable
sheath must be shortened by approx. 110 mm for connection to
the upper socket of the module, and by approx. 70 mm for connection to the lower socket. For the 4 x 8 I/O front connector
module (40-pole) and the front connector module for the Compact CPU (connector X1), the cable sheath must be shortened
by approx. 115 mm for connection to the upper socket of the
module, and by approx. 75 mm for connection to the lower
socket. For connection to the connection module, approx.
40 mm must be removed from the cable sheath.
Round-sheath ribbon cable 2 x 16-pole
For the 2 x 8 I/O front connector module (20-pole), the cable
sheath must be shortened by approx. 95 mm. For connection to
the upper socket of the front connector module, the outer flat cable must be shortened to 95 mm, and for connection to the lower
socket, the inner flat cable must be shortened to 40 mm. For the
4 x 8 I/O front connector module (40-pole) and the front connector module for the Compact CPU (connector X1), the cable
sheath must be shortened by approx. 115 mm. For connection
to the upper socket of the front connector module, the outer flat
cable must be shortened to 115 mm, and for connection to the
lower socket, the inner flat cable must be shortened to 75 mm.
For connection to the connection module, approx. 100 mm must
be removed from the cable sheath.

The flat cable must be inserted in such a way that the marked
core of the flat cable ends above the triangle of the connector.
The connector is an insulation displacement connector and can
be simply pressed on.
The strain relief is then fitted to the connector on the connection
module side of the round-sheath ribbon cable. After it has been
pressed on, the round-sheath ribbon cable is laid back over the
connector. The supplied strain relief can then be slipped over
the round-sheath ribbon cable until it latches to the connector.
When connecting the 2 x 16-pole round-sheath ribbon cable to
the 2 x 8 I/O front connector module (20-pole), the cable sheath
is positioned within the latter. The round-sheath ribbon cable is
secured to the front connector module using a cable tie.

Triangle

Marked core

Guide
key

G_KT01_EN_00111

Mounting of a round-sheath ribbon cable to a 16-pole connector, suitable

for a connection module and S7-300 front connector modules.
Front connector module
View to the socket in
mounting position

Upper socket

Connection module
Lower socket

Socket

Dismantling of cable sheath Dismantling of cable sheath Dismantling of cable sheath

Round sheath ribbon cable
1 x 16-pole
Front connector module 20-pole 8 I/O each

approx. 110 mm

approx. 70 mm

Front connector module 40-pole 8 I/O each

and Compact CPU
(X1 connector)

approx. 115 mm

approx. 75 mm

Connection module

approx. 40 mm

Round-sheath ribbon cable

2 x 16-pole
Front connector module 20-pole 2 x 8 I/O

approx. 95 mm
then shortening of the
outer flat cable to approx.
95 mm

Front connector module 40-pole 2 x 8 I/O

and Compact CPU
(X1 connector)

115 mm

then shortening of the

outer flat cable to approx.
115 mm
Connection module

then shortening of the

outer flat cable to approx.
40 mm

then shortening of the

outer flat cable to approx.
75 mm
approx. 100 mm

Siemens KT 10.2 2011

2/47

Kap02-4_Fully modular-2.fm Seite 48 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Mounting of round-sheath ribbon cable
and S7-400 connector

Integration
Preparation of round-sheat ribbon cables for mounting
The round-sheath ribbonx cable is first cut to the required length
by the user before mounting.

Lower section Guide

key

Insertion direction

Round-sheath ribbon cable 1 x 16-pole

When connecting to the top socket of the front connector module, the cable sheath must be removed by approx. 315 mm,
when connecting to the second socket from the top by approx.
270 mm, when connecting to the second socket from the bottom
by approx. 160 mm, and when connecting to the bottom socket
by approx. 140 mm.

Cover
Triangle

Indentification core

For connection to the connection module, approx. 40 mm must

be removed from the cable sheath.

Strain relief device

Round-sheath ribbonn cable 2 x 16-pole

When connecting to the two top sockets of the front connector
module, the cable sheath must be removed by approx. 270 mm,
and then the outer flat ribbon cable shortened to approx.
265 mm and the inner flat ribbon cable to 230 mm. For the two
bottom sockets of the front connector module, the cable sheath
must be removed by approx. 120 mm, and then the outer flat ribbon cable shortened to approx. 115 mm and the inner flat ribbon
cable to 85 mm.

G_KT01_EN_00211

Indentification core

Mounting of a round-sheath ribbon cable to a 16-pole connector, suitable

for a SIMATIC S7-400 front connector module

For connection to the connection module, approx. 100 mm must

be removed from the cable sheath.
Connection of round-sheath ribbon cable to 16-pole connector
The flat cable is threaded into the 16-pole connector. The connector is fitted with a guide key. Pin 1 is marked with a triangle
on the side of the guide key.
The flat cable must be inserted in such a way that the marked
core of the flat cable ends above the triangle of the connector.

Triangle

Make absolutely sure that the position of the marked core is correct, once for the front connector module (see graphic at top
right) and once for the connection module (see graphic at bottom right). The connector is an insulation displacement connector and can now be pressed on easily.

Guide
key

Then fix the strain relief. To do this, lay the round-sheath ribbon
cable back over the plug.
The supplied strain relief can then be slipped over the roundsheath cable and latched to the connector.

Marked core

G_KT01_EN_00111

Mounting of a round-sheath ribbon cable to a 16-pole connector, suitable

for a connection module and S7-400 front connector modules

Front connector module

View to the
socket in
mounting
position

Connection
module

Upper socket

Second upper
socket

Second lower
socket

Lower socket

Socket

Dismantling of
cable sheath

Dismantling of
cable sheath

Dismantling of
cable sheath

Dismantling of
cable sheath

Dismantling of
cable sheath

approx. 315 mm

approx. 270 mm

approx. 160 mm

approx. 140 mm

Flat round cable 1 x 16-pole

Front connector module 48-pole 8 I/O each
Connection module

approx. 40 mm

Flat round cable 2 x 16-pole

Front connector module 48-pole 2 x 8 I/O

approx. 270 mm
then shortening
of the outer flat
cable to approx.
265 mm

Connection modul

2/48

Siemens KT 10.2 2011

approx. 120 mm
then shortening
of the outer flat
cable to approx.
230 mm

then shortening
of the outer flat
cable to approx.
115 mm

then shortening
of the outer flat
cable to approx.
85 mm
ca. 100 mm

Kap02-4_Fully modular-2.fm Seite 49 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Wiring of S7-300 analog modules

Overview
Wiring of analog modules for the SIMATIC S7-300 with
SIMATIC TOP connect
An analog connection module is available for wiring SIMATIC
S7-300 analog modules with SIMATIC TOP connect. The following connection information must be followed when wiring.

Connection assignment for

connection module TPA
Module labeling

Connection module
1

Connection module
2

10

In the tables, you can see the assignment between the terminals
on the analog module and on the connection module.

11

12

Assignment of 20-pole analog front connector module to the

connection module

13

14

15

16

17

18

Load voltage supply

In the front connector module, there are separate connections
for the load voltage L+ and M. This allows you to connect the
load voltage supply of the analog module either on the front connector module or on the connection module. The distance between the front connector module and the connection module
can be up to 30 m.
Terminal assignment
The individual terminals are labeled alphabetically on the connection module TPA. This makes it easier for you to assign the
individual terminals on the analog module to the terminals of the
connection module.

The upper socket of the front connector module is the connection for connection module 1, and the lower socket of the front
connector module is the connection for connection module 2.

19
1
2
3
4
5
6
7
8
9
10

G-KT01_DE_00104

11
12
13
14
15
16
17
18
19
20

20

Terminal assignment of the 20-pole analog modules to the connection

modules

Siemens KT 10.2 2011

2/49

Kap02-4_Fully modular-2.fm Seite 50 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Wiring of S7-300 analog modules

Overview (continued)
Assignment of 40-pole analog front connector module to the
connection module

1
2
3
4
5
6
7
8
9
10

21
22
23
24
25
26
27
28
29
30

11
12
13
14
15
16
17
18
19
20

31
32
33
34
35
36
37
38
39
40

Connection
module 2

Module
labeling

Connection
module 3

Connection
module 4

21

22

23

24

25

26

27

28

29

10

30

11

31

12

32

13

33

14

34

15

35

16

36

17

37

18

38

19

39

20

40

Terminal assignment of the 40-pole analog modules to the connection

modules

2/50

Siemens KT 10.2 2011

Connection assignment
for connection module
TPA

Connection
module 1

G-KT01_DE_00105

In the table for the 40-pole analog front connector module,

you can see the assignment of the sockets to the connection
module.

Connection assignment
for connection module
TPA

I
Z

Kap02-4_Fully modular-2.fm Seite 51 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Wiring of S7-300 analog modules

Overview (continued)
Shield connection
Opening for
conductor to be
connected

Opening for
screwdriver

+
+
-

Supply
connections for
3 and 4

Supply
connections for 1
and 2

On the analog module, you can connect the shield of the

shielded signal cable to ground via a shield connection element,
and on the connection module you can connect the shield to
ground via the shield plate. You can connect the shield of the
signal cables or the round-sheath ribbon cable directly to the
connection module. Secure a shield plate to the connection
module for this purpose before assembly. In the graphic you can
see that the shield plate is on the rear of the connection module
and that the connection to the grounded mounting rail is made
in this way. You connect the shield of the signal cables or the
round-sheath ribbon cable with the shield connection terminals
on the shield plate.

To insert
shield plate

Shield termination for

terminal element and
twisted ribbon cable
including analog
module

To release
shield plate
depress interlock
Terminal block

Shield plate

To release
shield plate

G_KT01_EN_00118

G-KT01_EN_00103a

Legend:
5 openings for strain relief device
1 to 4: round-sheath ribbon cable connections
See the following table for address assignment

Shield connection for

terminal element and
signal line from the periphe

Analog connection module with shield plate

Terminal block assignment to the 40-pole analog front connector module

Connection cable connection

(see graphic for 40-pole analog
front connector module for
assignment)

Connection module assignment to the 40-pole analog

front connector module

Connection module 1

Connection module 2

Connection module 3

Connection module 4

Siemens KT 10.2 2011

2/51

Kap02-4_Fully modular-2.fm Seite 52 Dienstag, 28. September 2010 9:51 21

Siemens AG 2010

Fully modular connection

Configuration and wiring
Wiring of S7-400 analog modules

Overview
Wiring of analog modules for the SIMATIC S7-400 with
SIMATIC TOP connect
An analog connection module is available for wiring SIMATIC
S7-400 analog modules with SIMATIC TOP connect. The following connection information must be followed when wiring.

Numbering
Front connector
module

X1

Terminal assignment

X2

X3

X4

Connection module

Load voltage supply

In the front connector module, there are separate connections
for the load voltage L+ and M. This allows you to connect the
load voltage supply of the analog module either on the front connector module or on the connection module. The distance between the front connector module and the connection module
can be up to 30 m.

Connection

1
2
3
4
5
6

The individual terminals are labeled alphabetically on the connection module TPA. This makes it easier for you to assign the
individual terminals on the analog module to the terminals of the
connection module.

In the table, you can see the assignment between the terminals
on the analog module and on the connection module.

10

11

12

13

14

15

16

17

18

19
20

E
Z

21

22

23

24

25

26

27

28

29

30

31
32

E
Z

33

34

35

36
37

I
Y

39

40

42

See "wiring of S7-300 analog modules".

2/52

Siemens KT 10.2 2011

38

41

Shield connection

43

44

45

46

47
48

Kap03_Flexible connect.book Seite 1 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
3/2

Introduction

3/3
3/3
3/4
3/5
3/6

Front connector modules

S7-300 front connector with single cores
S7-400 front connector with single cores
Front connectors
Front connectors for S7-300 with crimp
connections

Siemens KT 10.2 2011

Kap03_Flexible connect.book Seite 2 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
Introduction
Flexible connection

Overview

Application
On the front connector with single cores, up to 16 or 32 digital
input and output channels can be connected directly with the
I/O. The single cores are fitted with screw contacts or crimp contacts and are cut off straight at the other end. The cores can be
easily assigned since they are coded in accordance with the pin
designations on the front connector.
The single cores are available as H05V-K version or with UL/CSA
certification.
The UL/CSA single cores are certified in accordance with
UL 1007/1569 or TR64.

Design
Front connector with attached single cores.
The front connectors are available in versions with screw
contacts or crimp contacts.
The single cores are available as H05V-K version or with
UL/CSA certification.
The cores have a cross-section of 0.5 mm2 and are labelled
with a printed number.
Cable ties combine the single cores into a bundle.
The standard lengths are 2.5 m, 3.2 m and 5.0 m. Special
lengths are available on request.

3
The flexible connection guarantees a fast and direct connection
from the input/output modules of the SIMATIC S7-300/400 to the
individual elements in the cabinet.
Already attached single cores reduce the wiring effort.
The core cross-sections of 0,5 mm2 also allow higher currents.

Benefits
Individual cores can be routed directly to each element in the
control cabinet
Higher currents possible due to greater cross-section with
lower voltage drop
Reduction in wiring overhead through simple connection of
the pre-assembled cable to the I/O module
Easy wiring. The number printed on the cores corresponds to
the connection point on the I/O connector
Clear control cabinet wiring thanks to bundled individual
cores

3/2

Siemens KT 10.2 2011

Kap03_Flexible connect.book Seite 3 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
Front connector modules
S7-300 front connector with single cores

Overview

Selection and ordering data

Designation

Order No.

Front connector with single cores

for 16-channel digital modules
SIMATIC S7-300, 20 x 0.5 mm2
Core type H05V-K
Screw-type version
Packaging unit: 1 unit; Length:
2.5 m

6ES7922-3BC50-0AB0

3.2 m

6ES7922-3BD20-0AB0

5m

6ES7922-3BF00-0AB0

Custom lengths

On request

Packaging unit: 5 units; Length:

Can be used for modules of the SIMATIC S7-300

The front connectors with single wires replace the standard
SIMATIC connectors
- 6ES7 392-1AJ00-0AA0
- 6ES7 392-1BJ00-0AA0
- 6ES7392-1CJ00-0AA0
- 6ES7392-1CM00-0AA0
- 6ES7 921-3AH00-0AA0
- 6ES7 392-1AM00-0AA0
- 6ES7 392-1BM01-0AA0
- 6ES7 921-3AH20-0AA0

2.5 m

6ES7922-3BC50-5AB0

3.2 m

6ES7922-3BD20-5AB0

5.0 m

6ES7922-3BF00-5AB0

Crimp version
Packaging unit: 1 unit
Length:
2.5 m

6ES7922-3BC50-0AF0

3.2 m

6ES7922-3BD20-0AF0

5.0 m

6ES7922-3BF00-0AF0
On request

Custom lengths
Core type UL/CSA-certified
Screw-type version

Technical specifications

Packaging unit: 1 unit; Length:

Front connector with single cores for 16 channels

3.2 m

6ES7922-3BD20-0UB0

Rated operating voltage

24 V DC

5.0 m

6ES7922-3BF00-0UB0

Permissible continuous current with

simultaneous load of all wires, max.

1.5 A

Permissible ambient temperature

0 to 60 C

Front connector with single cores

for 32-channel digital modules
SIMATIC S7-300, 40 x 0.5 mm2

Core type

H05V-K or with UL 1007/1569;

CSA TR64

Number of single cores

20

Core cross-section

0.5 mm2; Cu

Bundle diameter in mm

approx. 15

Core color

Blue, RAL 5010

Designation of cores

Numbered from 1 to 20
(front connector contact =
core number)

Packaging unit: 5 units; Length:

Assembly

Screw-type or crimp contacts

2.5 m

6ES7922-3BC50-5AC0

3.2 m

6ES7922-3BD20-5AC0

5.0 m

6ES7922-3BF00-5AC0

Front connector with single cores for 32 channels

Rated operating voltage

24 V DC

Permissible continuous current

with simultaneous load of all wires,
max.

1.5 A

Permissible ambient temperature

0 to 60 C

Core type

H05V-K or with UL 1007/1569;

CSA TR64

Core type H05V-K

Screw-type version
Packaging unit: 1 unit; Length:
2.5 m

6ES7922-3BC50-0AC0

3.2 m

6ES7922-3BD20-0AC0

5.0 m
Custom lengths

6ES7922-3BF00-0AC0
On request

Crimp version
Packaging unit: 1 unit; Length:
2.5 m

6ES7922-3BC50-0AG0

3.2 m

6ES7922-3BD20-0AG0

5.0 m
Custom lengths

Number of single cores

40

Core cross-section

0.5 mm2; Cu

Core type UL/CSA-certified

Bundle diameter in mm

approx. 17

Screw version
Packaging unit: 1 unit; Length:

Core color

Blue, RAL 5010

Designation of cores

Numbered from 1 to 40
(front connector contact =
core number)

Assembly

Screw-type or crimp contacts

6ES7922-3BF00-0AG0
On request

3.2 m

6ES7922-3BD20-0UC0

5.0 m

6ES7922-3BF00-0UC0

Siemens KT 10.2 2011

3/3

Kap03_Flexible connect.book Seite 4 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
Front connector modules
S7-400 front connector with single cores

Overview

Selection and ordering data

Designation

Order No.

Front connector with single cores

for 32-channel module
SIMATIC S7-400, 46 x 0.5 mm2
Core type H05V-K
Screw connection
Packaging unit: 1 unit
Length:
2.5 m

6ES7922-4BC50-0AD0

3.2 m

6ES7922-4BD20-0AD0

5m

6ES7922-4BF00-0AD0

Custom lengths

On request

Packaging unit: 5 units

Length:
2.5 m

6ES7922-4BC50-5AD0

3.2 m

6ES7922-4BD20-5AD0

5m

6ES7922-4BF00-5AD0

Crimp connection

Packaging unit: 1 unit

Length:

Can be used for modules of the SIMATIC S7-400.

The front connectors with single wires replace the standard
SIMATIC connectors:
- 6ES7 492-1AL00-0AA0
- 6ES7 492-1BL00-0AA0
- 6ES7 492-1CL00-0AA0

Technical specifications
Front connector with single cores

2.5 m

6ES7922-4BC50-0AE0

3.2 m

6ES7922-4BD20-0AE0

5m

6ES7922-4BF00-0AE0

Custom lengths

On request

Packaging unit: 5 units

Length:
2.5 m

6ES7922-4BC50-5AE0

3.2 m

6ES7922-4BD20-5AE0
6ES7922-4BF00-5AE0

Rated operating voltage

24 V DC

5m

Max. permissible continuous current with simultaneous load on all

cores

1.0 A

Core type UL/CSA-certified

Permissible ambient temperature

0 to +60 C

Packaging unit: 1 unit

Core type

H05V-K or with
UL style 1007/1569 CSA TR64

3.2 m

6ES7922-4BD20-0UD0

5m

6ES7922-4BF00-0UD0

Number of cores

46

Custom lengths

On request

Core cross-section

0.5 mm2, Cu

Bundle diameter in mm

approx. 17

Core color

Blue, RAL 5010

Designation of cores

Numbered 3 to 48 (adapter contact = core number)

Assembly

Screw-type or crimp contacts

3/4

Siemens KT 10.2 2011

Screw-type version

Kap03_Flexible connect.book Seite 5 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
Front connector modules
Front connectors

Overview

3
For easy and user-friendly connection of sensors and
actuators.
The front connector enables easy and user-friendly connection of sensors and actuators to signal modules. It is connected to the modules and covered by the door at the front.
Retaining the wiring when the module is replaced.
When replacing modules, only the front connector has to be
removed. Time-consuming replacement of all cables is not
necessary.
With a coding element to prevent mistakes when replacing
modules.
To avoid mistakes when replacing modules, the front connector is coded when inserted for the first time. Then it only fits into
the modules of the same type.

Siemens KT 10.2 2011

3/5

Kap03_Flexible connect.book Seite 6 Dienstag, 28. September 2010 10:17 22

Siemens AG 2010

Flexible connection
Front connector modules
Front connectors for S7-300
with crimp connections

Design

Selection and ordering data (Papier)

The front connector is available in two designs

Designation

The 20-pole front connector contains:

20 connections for crimp contacts for connecting the wiring
Strain relief for the cables
Unlatching key; for unlatching the front connector when replacing the module
Holder for coding element attachment; there are two coding
elements with attachments on the modules. The attachments
latch in when inserting into the front connector for the first time.

Front connector 20-pole,

crimp version
withoutcrimp contacts

The 40-pole front connector contains:

40 connections for crimp contacts for connecting the wiring
Strain relief for the cables
Locking screw; for fixing and detaching the front connector
when the module is replaced
Holder for coding element attachment; there is a coding element with an attachment on the modules. The attachment
latches in when inserting into the front connector for the first
time.

Integration
Use of the 20-pole front connector with
16-channel signal modules
Function modules
CPU 312 IFM
Use of the 40-pole front connector with
32-channel signal modules
Compact CPUs

3/6

Siemens KT 10.2 2011

Packaging unit (100 units)

Order No.

6ES7921-3AH00-1AA0

Front connector 40-pole,

crimp version
withoutcrimp contacts
Packaging unit (100 units)

6ES7921-3AH20-1AA0

Accessories
Crimp contacts for front
connectors

6XX3070

Packaging unit (250 units)

Crimping tool

6XX3071

for crimping the crimp contacts

Unlocking tool for crimp
contacts

6ES5497-4UC11

Siemens AG 2010

Configuration
4/2

Brief instruction
to the configuration guide

4/3

Configuration guides

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Brief instruction
to the configuration guide
For first time use
Tear the drawing pages along
the perforated line.
The perforated line is indicated
by the scissors symbol.

In daily use
1. In the upper part of the
sheets, find the SIMATIC
S7-300 or S7-400 with the
relevant front connector
module.
2. Find the connection module
you intend to use by looking
through the lower halves of
the pages.

You can find the valid

assignment of front connector module to connection
module in the selection
overview on pages 2/6
to 2/13.
3. Copy the page that you
have matched together.

Follow all the other steps on

the copy.
4. Enter the signal assignment
on the labeling field of the
module.
5. Enter the incoming or outgoing signals in the labeling
field of the connection
module.
6. Fill out the customized
labeling fields.
PLC type

Data for ordering and

documentation
Labeling field for the signals
of the module

Front connector assignment

of the module
and the connector
Assignment of the signal
cables to the connector board

Perforated line for cutting and

activating the configuration
guide

Assignment
of the IDC connector

Assignment of the signal

cables on the module board

Data for ordering and

documentation
Assignment of the
screw connection side

Labeling field for incoming or

outgoing signals

Drawing border

Fields for customized labels

and project designations

4/2

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/3

 Siemens AG 2010

Configuration
Configuration guides

4/4

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/5

 Siemens AG 2010

Configuration
Configuration guides

4/6

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/7

 Siemens AG 2010

Configuration
Configuration guides

4/8

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/9

 Siemens AG 2010

Configuration
Configuration guides

4/10

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/11

 Siemens AG 2010

Configuration
Configuration guides

4/12

Siemens KT 10.2 2011

Kap04-2_Configuration.fm Seite 13 Mittwoch, 29. September 2010 9:46 09

Siemens AG 2010

Configuration
Configuration guides
c

Siemens KT 10.2 2011

4/13

 Siemens AG 2010

Configuration
Configuration guides

4/14

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/15

 Siemens AG 2010

Configuration
Configuration guides

4/16

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/17

 Siemens AG 2010

Configuration
Configuration guides

4/18

Siemens KT 10.2 2011

 Siemens AG 2010

Configuration
Configuration guides

Siemens KT 10.2 2011

4/19

 Siemens AG 2010

Configuration
Configuration guides

S7-400

Suitable pre-assembled round cables

Suitable round sheath ribbon cables

1 x 16-pole
6ES7923 - 0CD00 - 0AA0 30 m unshielded
6ES7923 - 0CG00 - 0AA0 60 m unshielded
6ES7923 - 0CD00 - 0BA0 30 m unshielded
6ES7923 - 0CG00 - 0BA0 60 m unshielded
Accessories for the round sheath ribbon cable: 2 x 16-pole
8 16-pole socket terminal
6ES7923 - 2CD00 - 0AA0 30 m unshielded
and 8 strain relief assemblies
6ES7923 - 2CG00 - 0AA0 60 m unshielded
6ES7921 - 3BE10 - 0AA0
Front connector module with potential infeed
with screw connection
6ES7921 - 4AB00 - 0AA0

1 x 16-pole unshielded
6ES7923 - 0BA50 - 0CB0L=0.5 m
6ES7923 - 0BB00 - 0CB0L=1.0 m
6ES7923 - 0BB50 - 0CB0L=1.5 m
6ES7923 - 0BC00 - 0CB0L=2.0 m
6ES7923 - 0BC50 - 0CB0L=2.5 m
6ES7923 - 0BD00 - 0CB0L=3.0 m
6ES7923 - 0BE00 - 0CB0L=4.0 m
6ES7923 - 0BF00 - 0CB0L=5.0 m

1 x 16-pole shielded
6ES7923 - 0BB00 - 0DB0L=1.0 m
6ES7923 - 0BC00 - 0DB0L=2.0 m
6ES7923 - 0BC50 - 0DB0L=2.5 m
6ES7923 - 0BD00 - 0DB0L=3.0 m
6ES7923 - 0BE00 - 0DB0L=4.0 m
6ES7923 - 0BF00 - 0DB0L=5.0 m

48 46 44 42 40 38 36 34 32 30 28 26 24 22
20 18 16 14 12 10
8
6
4
2
47 45 43 41 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11
9
7
5
3
1

+
+
+
-

10

10

11

11

12

12

13

13

14

14

15

15

16

16

M1M1 L1L1

10

10

11

12

11

12

13

13

16

15

16

L2 L2

L2 L2

10

10

11

12

11

12

14

13

14

15

16

15

16

L3 L3

Date

10

11

10

12

11

SF2 M3 M3 7

13

12

14

13

15

14

16

15

16

M1M1 L1L1

Green
on

L2 L2

SF1M2 M2 3

L2 L2

Green
on

Red
overload

B2.7
B2.6
B2.5
B2.4
B2.3
B2.2
B2.1
B2.0

SF2 M3 M3 7

13

Green
on

Red
overload

L3 L3

B3.7
B3.6
B3.5
B3.4
B3.3
B3.2
B3.1
B3.0

SF1M2 M2 3

Green
on

Red
overload

SF1M2 M2 3

Green
on

Green
on

Red
overload

M1M1 L1L1

Green
on

SF2 M3 M3 7

14

15

M1M1 L1L1

Green
on

SF1M2 M2 3

14

L3 L3

SF2 M3 M3 7

L3 L3

4xconnection module with optocoupler TPOo 8 A spring connection 6ES7924 - 0BF10 - 0BB0
or 4xconnection module with optocoupler TPOo 8 A screw connection 6ES7924 - 0BF10 - 0BA0

CAD

Red
overload

Red
overload

B0.7
B0.6
B0.5
B0.4
B0.3
B0.2
B0.1
B0.0

Red
overload

Red
overload

B1.7
B1.6
B1.5
B1.4
B1.3
B1.2
B1.1
B1.0

Name

Creat.
Tested
Standard

Sheet of :

Date

Status Rev.

4/20

Siemens KT 10.2 2011

Name

Repl. for :

Repl. by :

Pages

Siemens AG 2010

Appendix
5/2

Partner at Industry Automation and

Drive Technologies

5/3
5/3

Online Services
Information and Ordering
in the Internet and on DVD

5/4
5/4
5/5
5/5

Service & Support

The unmatched complete service
for the entire life cycle
Knowledge Base on DVD
Automation Value Card

5/6

Subject index

5/7

Index of order numbers

5/8

Conditions of sale and delivery

5/8

Export regulations

Siemens KT 10.2 2011

Kap05-2_Appendix standard.fm Seite 2 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Partner at Industry Automation and Drive Technologies
At Siemens Industry Automation and Drive Technologies, more
than 85 000 people are resolutely pursuing the same goal: longterm improvement of your competitive ability. We are committed
to this goal. Thanks to our commitment, we continue to set new
standards in automation and drive technology. In all industries
worldwide.
At your service locally, around the globe for consulting, sales,
training, service, support, spare parts ... on the entire Industry
Automation and Drive Technologies range.
Your personal contact can be found in our Contacts Database at:
www.siemens.com/automation/partner
You start by selecting a
Product group,
Country,
City,
Service.

5/2

Siemens KT 10.2 2011

Kap05-2_Appendix standard.fm Seite 3 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Online Services
Information and Ordering
in the Internet and on DVD

Siemens Industry Automation and Drive Technologies in the WWW

A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
Siemens Industry Automation and Drive Technologies has
therefore built up a comprehensive range of information in the
World Wide Web, which offers quick and easy access to all data
required.
Under the address
www.siemens.com/industry
you will find everything you need to know about products, systems and services.

Product Selection Using the Offline Mall of Industry

Detailed information together with convenient interactive
functions:
The Offline Mall CA 01 covers more than 80 000 products and
thus provides a full summary of the Siemens Industry Automation
and Drive Technologies product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives.
All information is linked into a user interface which is easy to
work with and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the Offline Mall CA 01 can be found in the Internet
under
www.siemens.com/automation/ca01
or on DVD.

Easy Shopping with the Industry Mall

The Industry Mall is the virtual department store of Siemens AG
in the Internet. Here you have access to a huge range of products presented in electronic catalogs in an informative and attractive way.
Data transfer via EDIFACT allows the whole procedure from
selection through ordering to tracking of the order to be carried
out online via the Internet.
Numerous functions are available to support you.
For example, powerful search functions make it easy to find the
required products, which can be immediately checked for availability. Customer-specific discounts and preparation of quotes
can be carried out online as well as order tracking and tracing.
Please visit the Industry Mall on the Internet under:
www.siemens.com/industrymall

Siemens KT 10.2 2011

5/3

Kap05-2_Appendix standard.fm Seite 4 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Service & Support
Services covering the entire life cycle

Technical Consulting

ng & Design
Planni

Op
ti m
iza

Technical
Consulting

io
rat
gu
n&

Technical
Support

Development

Modernization
and
Optimization

nf i

Online
Support
Spare Parts
and Repairs

Engineering
Support

nin
g

tio
er a
Op

Field
Service

&

is
sio

Modernizat
ion &

Co

ti

on

ain
ten

anc
e

Install

n
atio

om
&C

Engineering Support

Our Service & Support are available worldwide to help you with
every aspect of Siemens automation and drive technology. We
offer on-site support for every phase of the life cycle of your machines and plants in more than 100 countries. Round the clock.
Every step of the way, you have access to an experienced team
of specialists and their combined expertise. Thanks to regular
training and the close cooperation of key employees around the
globe, we are able to offer reliable services for a huge range of
options.

Online Support

Spare Parts and Repairs

Competent consulting in technical questions covering a wide

range of customer-oriented services for all our products and
systems.
http://www.siemens.com/
automation/support-request

Support in configuring and developing with customer-oriented

services from actual configuration to implementation of the automation project.

With Field Service, we offer services for startup and maintenance essential for ensuring
system availability.

The comprehensive information

system available round the
clock via Internet ranging from
Product Support and Service &
Support services to Support
Tools in the Shop.
http://www.siemens.com/
automation/service&support

Technical Support

Field Service

Support in the planning and designing of your project from detailed actual-state analysis,
target definition and consulting
on product and system questions right to the creation of the
automation solution.

Optimization and Upgrading

In the operating phase of a machine or automation system, we

provide a comprehensive repair
and spare parts service ensuring the highest degree of plant
availability.

After startup or during the operating phase, additional potential for inceasing the productiviy
or for reducing costs often arises. For this purpose, we offer
you high-quality services in optimization and upgrading.

You will find contact details in the Internet under:

http://www.siemens.com/automation/service&support

5/4

Siemens KT 10.2 2011

Kap05-2_Appendix standard.fm Seite 5 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Service & Support
Knowledge Base on DVD
For locations without online connections to the Internet there are
excerpts of the free part of the
information sources available on
DVD (Service & Support Knowledge Base). This DVD contains
all the latest product information
at the time of production (FAQs,
Downloads, Tips and Tricks, Updates) as well as general information on Service & Support.

The DVD also includes a full-text search and our Knowledge

Manager for targeted searches for solutions. The DVD will be updated every 4 months.
Just the same as our online offer in the Internet, the Service &
Support Knowledge Base on DVD comes complete in 5 languages (German, English, French, Italian, Spanish).
You can order the Service & Support Knowledge Base DVD
from your Siemens contact.
Order no. 6ZB5310-0EP30-0BA2

Automation Value Card

By entering the card number and PIN you have full access to the
Service & Support services being offered. The charge for the
services procured is debited from the credits on your Automation Value Card.
All the services offered are marked in currency-neutral credits,
so you can use the Automation Value Card worldwide.
Order your Automation and Value Card easily and comfortably
like a product with your sales contact.
Automation Value Card order numbers
Credits

Order no.

200

6ES7 997-0BA00-0XA0

500

6ES7 997-0BB00-0XA0

1 000

6ES7 997-0BC00-0XA0

10 000

6ES7 997-0BG00-0XA0

Small card - great support

Detailed information on the services offered is available on our

Internet site at:

The Automation Value Card is an integral component of the comprehensive service concept with which Siemens Automation and
Drives will accompany you in each phase of your automation
project.

Service & Support la Card: Examples

www.siemens.com/automation/service&support
Technical Support

It doesn't matter whether you want just specific services from our
Technical Support or want to purchase something on our Online
portal, you can always pay with your Automation Value Card. No
invoicing, transparent and safe. With your personal card number
and associated PIN you can view the state of your account and
all transactions at any time.

Priority

Priority processing for urgent cases

24 h

Availability round the clock

Extended

Technical consulting for complex questions

Mature
Products

Consulting service for products that are not available

any more

Services on card. This is how it's done.

Support Tools in the Support Shop

Card number and PIN are on the back of the Automation Value
Card. When delivered, the PIN is covered by a scratch field,
guaranteeing that the full credit is on the card.

Tools that can be used directly for configuration, analysis and testing

Siemens KT 10.2 2011

5/5

Kap05-2_Appendix standard.fm Seite 6 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Subject index
Page
A
Automation Value Card...........................5/5
B
Basic modules................................... 2/30
Brief instruction
to the configuration guide ................. 4/2
C
Conditions of sale and delivery..............5/8
Configuration and wiring ................... 2/47
Configuration guides .......................... 4/3
Connecting cables ........................... 2/27
Connection modules ........................ 2/29
E
Export regulations ............................... 5/8
F
Flexible connection ............................ 3/2
Front connector modules .......... 2/14, 3/3
Front connectors ................................ 3/5
Front connectors for S7-300
with crimp connections .................... 3/6
Function module ............................... 2/41

Page
I
Index of order numbers ....................... 5/7
Information and Ordering
in the Internet and on DVD............... 5/3
Introduction .......................... 2/2, 2/5, 3/2
K
Knowledge Base on DVD.................... 5/5
M
Mounting of round-sheath ribbon
cable and S7-300 connector ......... 2/47
Mounting of round-sheath ribbon
cable and S7-400 connector ......... 2/48
O
Online Services .................................. 5/3
Overview..................................... 2/2, 2/29
P
Partner at Industry Automation
and Drive Technologies .................... 5/2

Page
S
S7-300 front connector modules ....... 2/15
S7-300 front connector
with single cores ............................... 3/3
S7-300 and S7-400
font connector modules ................. 2/14
S7-400 front connector modules ...... 2/23
S7-400 front connector
with single cores .............................. 3/4
Selection overview.................................2/6
SIMATIC S7-300 analog.....................2/10
SIMATIC S7-300 Compact CPU ..........2/6
SIMATIC S7-300 digital ....................... 2/8
SIMATIC S7-400.................................2/12
Service & Support .............................. 5/4
Services covering
the entire life cycle ........................... 5/3
Signal modules ................................. 2/36
SIMATIC S7-300 analog .......................2/10
SIMATIC S7-300 Compact CPU.............2/6
SIMATIC S7-300 digital.......................... 2/8
SIMATIC S7-400....................................2/12
Subject index ...................................... 5/6
W
Wiring of S7-300 analog modules .... 2/49
Wiring of S7-400 analog modules ..... 2/52

5/6

Siemens KT 10.2 2011

Kap05-2_Appendix standard.fm Seite 7 Mittwoch, 29. September 2010 1:04 13

Siemens AG 2010

Appendix
Index of order numbers
Type

Page

6ES5
6ES5497-4UC11 ................................. 3/6
6ES7 390
6ES7390-5AB00-0AA0 ...................... 2/32
6ES7390-5BA00-0AA0 ...................... 2/32
6ES7390-5CA00-0AA ........................ 2/32
6ES7 9213
6ES7921-3AA00-0AA0 ..................... 2/17
6ES7921-3AA20-0AA0 ...................... 2/17
6ES7921-3AB00-0AA0 ...................... 2/17
6ES7921-3AB20-0AA0 ...................... 2/17
6ES7921-3AC00-0AA0 ...................... 2/17
6ES7921-3AD00-0AA0 ..................... 2/17
6ES7921-3AF00-0AA0 ...................... 2/17
6ES7921-3AF20-0AA0 ...................... 2/17
6ES7921-3AG00-0AA0 ..................... 2/17
6ES7921-3AG20-0AA0 ..................... 2/17
6ES7921-3AH00-1AA0 ........................ 3/6
6ES7921-3AH20-1AA0 ........................ 3/6
6ES7921-3AK20-0AA0 ...................... 2/17
6ES7921-3AM20-0AA0 ..................... 2/17
6ES7921-3BE10-0AA0 ...................... 2/28
6ES7921-4AB00-0AA0 ..................... 2/24
6ES7921-4AD00-0AA0 ..................... 2/24
6ES7921-4AG00-0AA0 ..................... 2/24
6ES7 922
6ES7922-3BC50-0AB0 ....................... 3/3
6ES7922-3BC50-0AC0 ....................... 3/3
6ES7922-3BC50-0AF0 ........................ 3/3
6ES7922-3BC50-0AG0 ....................... 3/3
6ES7922-3BC50-5AB0 ....................... 3/3
6ES7922-3BC50-5AC0 ....................... 3/3
6ES7922-3BD20-0AB0 ....................... 3/3
6ES7922-3BD20-0AC0 ....................... 3/3
6ES7922-3BD20-0AF0 ........................ 3/3
6ES7922-3BD20-0AG0 ....................... 3/3
6ES7922-3BD20-0UB0 ....................... 3/3
6ES7922-3BD20-0UC0 ....................... 3/3
6ES7922-3BD20-5AB0 ....................... 3/3
6ES7922-3BD20-5AC0 ....................... 3/3
6ES7922-3BF00-0AB0 ........................ 3/3
6ES7922-3BF00-0AC0 ........................ 3/3
6ES7922-3BF00-0AF0 ........................ 3/3
6ES7922-3BF00-0AG0 ....................... 3/3
6ES7922-3BF00-0UB0 ........................ 3/3
6ES7922-3BF00-0UC0 ....................... 3/3
6ES7922-3BF00-5AB0 ........................ 3/3
6ES7922-3BF00-5AC0 ........................ 3/3
6ES7922-4BC50-0AD0 ....................... 3/4
6ES7922-4BC50-0AE0 ....................... 3/4
6ES7922-4BC50-5AD0 ....................... 3/4
6ES7922-4BC50-5AE0 ....................... 3/4
6ES7922-4BD20-0AD0 ....................... 3/4
6ES7922-4BD20-0AE0 ....................... 3/4
6ES7922-4BD20-0UD0 ....................... 3/4
6ES7922-4BD20-5AD0 ....................... 3/4
6ES7922-4BD20-5AE0 ....................... 3/4

Type

Page

6ES7922-4BF00-0AD0 ........................ 3/4

6ES7922-4BF00-0AE0 ........................ 3/4
6ES7922-4BF00-0UD0 ....................... 3/4
6ES7922-4BF00-5AD0 ........................ 3/4
6ES7922-4BF00-5AE0 ........................ 3/4
6ES7 923
6ES7923-0BA50-0CB0 ..................... 2/28
6ES7923-0BB00-0CB0 ..................... 2/28
6ES7923-0BB00-0DB0 ..................... 2/28
6ES7923-0BB50-0CB0 ..................... 2/28
6ES7923-0BC00-0CB0 ..................... 2/28
6ES7923-0BC00-0DB0 ..................... 2/28
6ES7923-0BC50-0CB0 ..................... 2/28
6ES7923-0BC50-0DB0 ..................... 2/28
6ES7923-0BD00-0CB0 ..................... 2/28
6ES7923-0BD00-0DB0 ..................... 2/28
6ES7923-0BE00-0CB0 ..................... 2/28
6ES7923-0BE00-0DB0 ..................... 2/28
6ES7923-0BF00-0CB0 ...................... 2/28
6ES7923-0BF00-0DB0 ...................... 2/28
6ES7923-0CD00-0AA0 ..................... 2/28
6ES7923-0CD00-0BA0 ..................... 2/28
6ES7923-0CG00-0AA0 ..................... 2/28
6ES7923-0CG00-0BA0 ..................... 2/28
6ES7923-2CD00-0AA0 ..................... 2/28
6ES7923-2CG00-0AA0 ..................... 2/28

Type

Page

6ES7 924
6ES7924-0AA10-0AA0 .....................2/32
6ES7924-0AA10-0AB0 .....................2/32
6ES7924-0AA10-0BA0 .....................2/38
6ES7924-0AA10-0BB0 .....................2/38
6ES7924-0BB10-0AA0 .....................2/32
6ES7924-0BB10-0AB0 .....................2/32
6ES7924-0BB10-0BA0 .....................2/38
6ES7924-0BB10-0BB0 .....................2/38
6ES7924-0BD10-0BA0 .....................2/44
6ES7924-0BD10-0BB0 .....................2/44
6ES7924-0BE10-0BA0 ......................2/44
6ES7924-0BE10-0BB0 ......................2/44
6ES7924-0BF10-0BA0 ......................2/44
6ES7924-0BF10-0BB0 ......................2/44
6ES7924-0CA10-0AA0 .....................2/32
6ES7924-0CA10-0AB0 .....................2/32
6ES7924-0CA10-0BA0 .....................2/38
6ES7924-0CA10-0BB0 .....................2/38
6ES7924-0CC10-0AA0 .....................2/32
6ES7924-0CC10-0AB0 .....................2/32
6ES7924-1AA10-0AA0 ......................2/32
6ES7924-1AA10-0AB0 .....................2/32
6ES7924-1AA10-0BA0 .....................2/38
6ES7924-1AA10-0BB0 .....................2/38
6ES7 928
6ES7928-0AA00-0AA0 .....................2/28
6ES7928-1BA00-0AA0 .....................2/32
6ES7928-2AB00-0AA0 .....................2/32
6ES7928-2AB00-0AA0 .....................2/38
6ES7928-2AB00-0AA0 .....................2/44
6ES7928-2BB00-0AA0 .....................2/32
6ES7928-2BB00-0AA0 .....................2/38
6ES7928-2BB00-0AA0 .....................2/44
6ES7928-3AA00-4AA0 .....................2/44
6ES7928-3BA00-4AA0 .....................2/44
6ES7928-3CA00-4AA0 .....................2/44
6ES7928-3DA00-4AA0 .....................2/44
6XX30
6XX3070 .............................................3/6
6XX3071 .............................................3/6

Siemens KT 10.2 2011

5/7

 Siemens AG 2010

Appendix
Conditions of sale and delivery
Export regulations

Terms and Conditions of Sale and Delivery

By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products, by
any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The General Terms of Payment as well as the General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry shall apply.
For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany shall apply.
For customers with a seat or registered office outside of
Germany
The General Terms of Payment as well as the General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany shall
apply.
For software products, the General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany shall apply.

General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages,
- especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices.
It shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release
order.
The metal factor determines the official price as of which the
metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
An exact explanation of the metal factor and the text of the
Comprehensive Terms and Conditions of Sale and Delivery are
available free of charge from your local Siemens business office
under the following Order Nos.:
6ZB5310-0KR30-0BA1
(for customers based in Germany)
6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
www.siemens.com/industrymall
(Germany: Industry Mall Online-Help System)

5/8

Siemens KT 10.2 2011

Export regulations
Our obligation to fulfill this agreement is subject to the proviso
that the fulfillment is not prevented by any impediments arising
out of national and international foreign trade and customs
requirements or any embargos and/or other sanctions.
If you transfer goods (hardware and/ or software and/ or technology as well as corresponding documentation, regardless of
the mode of provision) delivered by us or works and services
(including all kinds of technical support) performed by us to a
third party worldwide, you shall comply with all applicable
national and international (re-) export control regulations.
If required to conduct export control checks, you, upon request
by us, shall promptly provide us with all information pertaining to
particular end customer, destination and intended use of goods,
works and services provided by us, as well as any export control
restrictions existing.
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL

Number of the German Export List

Products marked other than N require an export
license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an AL not equal to N are
subject to a European or German export authorization when being exported out of the EU.

ECCN

Export Control Classification Number

Products marked other than N are subject to a
reexport license to specific countries.
In the case of software products, the export
designations of the relevant data medium must
also be generally adhered to.
Goods labeled with an ECCN not equal to N
are subject to a US re-export authorization.

Even without a label or with an AL: N or ECCN: N, authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization
indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
IA/DT/BT VuL_ohne MZ En 07.07.10

 Siemens AG 2010

Catalogs
Industry Automation, Drive Technologies and Low Voltage Distribution
Further information can be obtained from our branch offices listed
in the appendix or at www.siemens.com/automation/partner
Interactive Catalog on DVD
for Industry Automation, Drive Technologies and
Low Voltage Distribution

Catalog
CA 01

Drive Systems
Variable-Speed Drives

Catalog

Motion Control
SINUMERIK & SIMODRIVE
Automation Systems for Machine Tools

NC 60

SINUMERIK & SINAMICS

Equipment for Machine Tools

NC 61

SIMOTION, SINAMICS S120 and

Motors for Production Machines

PM 21

SINAMICS S110
The Basic Positioning Drive

PM 22

SINAMICS G110, SINAMICS G120

Standard Inverters
SINAMICS G110D, SINAMICS G120D
Distributed Inverters

D 11.1

SINAMICS G130 Drive Converter Chassis Units

SINAMICS G150 Drive Converter Cabinet Units

D 11

SINAMICS GM150, SINAMICS SM150

Medium-Voltage Converters

D 12

Low-Voltage
Controls and Distribution
SIRIUS, SENTRON, SIVACON

SINAMICS S120 Chassis Format Units and

Cabinet Modules
SINAMICS S150 Converter Cabinet Units

D 21.3

PDF: SIDAC Reactors and Filters

LV 60

PDF: SIVACON 8PS Busbar Trunking Systems

LV 70

SINAMICS DCM Converter Units

D 23.1

Low-Voltage Controls and Distribution

SIRIUS, SENTRON, SIVACON

LV 90

Three-phase Induction Motors

H-compact
H-compact PLUS

D 84.1

Asynchronous Motors Standardline

D 86.1

Synchronous Motors with Permanent-Magnet

Technology, HT-direct

D 86.2

DC Motors

LV 1

SICUBE System Cubicles and Cubicle Air-Conditioning LV 50

Power Supply and System Cabling

Power supply SITOP

KT 10.1

System cabling SIMATIC TOP connect

KT 10.2

DA 12

Process Instrumentation and Analytics

Field Instruments for Process Automation

FI 01

SIMOREG DC MASTER 6RA70 Digital Chassis

Converters

DA 21.1

PDF: Indicators for panel mounting

MP 12

SIMOREG K 6RA22 Analog Chassis Converters

DA 21.2

SIREC Recorders and Accessories

MP 20

PDF: SIMOREG DC MASTER 6RM70 Digital Converter

Cabinet Units

DA 22

SIPART, Controllers and Software

MP 31

Products for Weighing Technology

WT 10

DA 45

Process Analytical Instruments

PA 01

SIEMOSYN Motors

DA 48

PA 11

MICROMASTER 420/430/440 Inverters

DA 51.2

PDF: Process Analytics,

Components for the System Integration

MICROMASTER 411/COMBIMASTER 411

DA 51.3

SIMOVERT MASTERDRIVES Vector Control

DA 65.10

SIMOVERT MASTERDRIVES Motion Control

DA 65.11

Synchronous and asynchronous servomotors for

SIMOVERT MASTERDRIVES

DA 65.3

SIMODRIVE 611 universal and POSMO

DA 65.4

SIMOTION, SINAMICS S120 and

Motors for Production Machines

PM 21

SINAMICS S110
The Basic Positioning Drive

PM 22

SIMOVERT PM Modular Converter Systems

Low-Voltage Three-Phase-Motors

Safety Integrated
Safety Technology for Factory Automation

SI I0

SIMATIC HMI
Human Machine Interface Systems

ST 80

SIMATIC Industrial Automation Systems

Products for Totally Integrated Automation and
Micro Automation

ST 70

SIMATIC PCS 7 Process Control System

ST PCS 7

Add-ons for the SIMATIC PCS 7

Process Control System

ST PCS 7.1

IEC Squirrel-Cage Motors

D 81.1

MOTOX Geared Motors

D 87.1

PDF: Migration solutions with the SIMATIC PCS 7

Process Control System

ST PCS 7.2

Automation Systems for Machine Tools SIMODRIVE

Motors
Converter Systems SIMODRIVE 611/POSMO

NC 60

pc-based Automation

ST PC

Automation Systems for Machine Tools SINAMICS

Motors
Drive System SINAMICS S120

NC 61

SIMATIC NET
Industrial Communication

IK PI

Drive and Control Components for Hoisting Equipment

HE 1

SIMATIC Sensors
Sensor Technology for Factory Automation

FS 10

Industrial Identification Systems

ID 10

Mechanical Driving Machines

Flender Standard Couplings

MD 10.1

Electrical Installation Technology

PDF: ALPHA Distribution Boards and Terminal Blocks

ET A1

PDF: ALPHA 8HP Molded-Plastic Distribution System

ET A3

PDF: BETA Low-Voltage Circuit Protection

ET B1

PDF: DELTA Switches and Socket Outlets

ET D1

PDF: GAMMA Building Management Systems

ET G1

PDF: These catalogs are only available as pdf files.

System Solutions
Applications and Products for Industry are part of the
interactive catalog CA 01

Download-Center
PDF versions of the catalogs are available on the Internet at:
www.siemens.com/automation/infocenter
IA/DT/BT LV/3U/En 04.08.10

 Siemens AG 2010

Siemens AG
Industry Sector
Sensors and Communication
Postfach 4848
90026 NRNBERG
GERMANY

www.siemens.com/automation

Subject to change without prior notice

PDF (E86060-K2410-A201-A5-7600)
3P.8201.71.02
KG 0910 96 En
Produced in Germany
Siemens AG 2010

The information provided in this catalog contains descriptions

or characteristics of performance which in case of actual use do
not always apply as described or which may change as a result
of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed
in the terms of contract. Availability and technical specifications
are subject to change without notice.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of
the owners.