C32 ACERT
Industrial Engine
Tier 2
839 bkW/1125 bhp @ 2100 rpm
CAT ENGINE SPECIFICATIONS
Vee 12 Cylinder, 4-Stroke-Cycle Diesel
Bore......................................................145.0 mm (5.71 in)
Stroke...................................................162.0 mm (6.38 in)
Displacement..................................... 32.1 L (1,958.86 in3)
Aspiration...............................Turbocharged Aftercooled
Compression Ratio...................................................16.5:1
Rotation (from flywheel end).............. Counterclockwise
Weight, Net Dry (approximate kg. lb).. 2946 kg (6495 lb)
Image shown may not reflect
actual engine
FEATURES
Emissions
Meets U.S. EPA Tier 2 emissions requirements.
Full Range of Attachments
Wide range of bolt-on system expansion
attachments, factory designed and tested.
Worldwide Supplier Capability
Caterpillar
- Casts engine blocks, heads, cylinder liners, and
flywheel housings
- Machines critical components
- Assembles complete engine
- Factory-designed systems built at Caterpillar ISO
9001:2000 certified facilities
Ownership of these manufacturing processes
enables Caterpillar to produce high quality,
dependable product.
Unmatched Product Support Offered Through
Worldwide Caterpillar Dealer Network
More than 1,800 dealer outlets
Caterpillar factory-trained dealer technicians service
every aspect of your industrial engine
99.7% of parts orders filled within 24 hours
worldwide
Caterpillar parts and labor warranty
Preventive maintenance agreements available for
repair before failure options
Testing
Prototype testing on every model:
- proves computer design
- verifies system torsional stability
- functionality tests every model
Scheduled Oil Sampling program matches your oil
sample against Caterpillar set standards to
determine:
- internal engine component condition
- presence of unwanted fluids
- presence of combustion by-products
Every Caterpillar engine is dynamometer tested
under full load to ensure proper engine
performance.
Web Site
For all your industrial power requirements, visit
www.cat-industrial.com.
16 April 2012
9:47 AM
C32 ACERT
Industrial Engine
Tier 2
839 bkW/1125 bhp @ 2100 rpm
STANDARD ENGINE EQUIPMENT
Air Inlet System
Turbocharged Air to Air Aftercooled
Control System
Electronic governing
PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine
limit
Electronic diagnostics and fault logging
Engine monitoring system
J1939 Broadcast (diagnostic and engine status)
ADEM A4
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Fuel System
MEUI injection
Fuel filter, secondary (2 micron high performance)
Fuel transfer pump
Fuel priming pump
ACERT Technology
Lube System
Crankcase breather
Oil cooler
Oil filler
Oil filter
Oil pan front sump
Oil dipstick
Oil pump (gear driven)
General
Paint, Caterpillar Yellow
Vibration damper
Lifting eyes
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing
16 April 2012
9:47 AM
C32 ACERT
Industrial Engine
Tier 2
839 bkW/1125 bhp @ 2100 rpm
PERFORMANCE CURVES
IND - C (Intermittent) - DM9031-00
Torque
Nm
Metric
Engine
Power kW
BSFC
g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power
rpm
kW
2100
2000
1900
1800
1700
1600
1500
1400
1300
1200
1100
839
839
839
839
830
812
787
754
691
599
512
Torque Nm
3815
4006
4217
4451
4662
4846
5010
5143
5076
4764
4448
BSFC g/kW-hr Fuel Rate L/hr
214.7
210.6
209.7
207
204.7
203.6
203.1
202.4
202.2
204.6
205.8
214.7
210.6
209.8
207.0
202.6
197.1
190.5
181.9
166.6
146.0
125.7
16 April 2012
9:47 AM
C32 ACERT
Industrial Engine
Tier 2
839 bkW/1125 bhp @ 2100 rpm
PERFORMANCE CURVES
IND - C (Intermittent) - DM9031-00
Engine
Torque
lbft
English
Engine
Power bhp
BSFC
lb/bhp-hr
Engine Speed rpm
Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr
rpm
bhp
lbft
2100
2000
1900
1800
1700
1600
1500
1400
1300
1200
1100
1125
1125
1125
1125
1113
1089
1055
1011
927
803
687
2814
2955
3110
3283
3439
3574
3695
3793
3744
3514
3281
Fuel Rate
gal/hr
.353
.346
.345
.340
.337
.335
.334
.333
.332
.336
.338
56.7
55.6
55.4
54.7
53.5
52.1
50.3
48.1
44.0
38.6
33.2
16 April 2012
9:47 AM
C32 ACERT
Industrial Engine
RATINGS AND CONDITIONS
IND - C (Intermittent) Intermittent service where
maximum power and/or speed are cyclic (time at full
load not to exceed 50%).
Engine Dimensions
(1) Length
See page
1-Specifications
(2) Width
for
(3) Height
Dimensions
Performance Number: DM9031-00
Feature Code: C32DI07 Arr. Number: 3505525
Materials and specifications are subject to change without notice.
16302377
Tier 2
839 bkW/1125 bhp @ 2100 rpm
Engine Performance Diesel Engines 7 liter and
higher
All rating conditions are based on SAE J1995, inlet
air standard
conditions of 99 kPa (29.31 in. Hg) dry barometer
and 25C (77F)
temperature. Performance measured using a
standard fuel with fuel
gravity of 35 API having a lower heating value of
42,780 kJ/kg
(18,390 btu/lb) when used at 29 C (84.2 F) with a
density of 838.9 g/L.
Note: Do not use for installation
design. See general dimension
drawings for detail (Drawing # null
).
2012 Caterpillar
All rights reserved.
The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," the
"Power Edge" trade dress, as well as corporate and product identity
used herein, are trademarks of Caterpillar and may not be used
without permission.
