Scribd
Upload
198 views

ThreadTables PDF

This document provides information on standard thread specifications including ISO metric, UNC inch, ISO inch G, and Whitworth threads. It includes tables with the nominal dimensions like major diameter, pitch diameter, and minor diameter. It also lists the tolerances for pitch diameter for nuts, bolts, and various tolerance classes. Additional information is provided on how to calculate nominal pitch diameter from major diameter and pitch. The purpose is to provide guidelines for dimensional tolerances of common thread standards.

Uploaded by

Richard Hockley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
198 views

ThreadTables PDF

This document provides information on standard thread specifications including ISO metric, UNC inch, ISO inch G, and Whitworth threads. It includes tables with the nominal dimensions like major diameter, pitch diameter, and minor diameter. It also lists the tolerances for pitch diameter for nuts, bolts, and various tolerance classes. Additional information is provided on how to calculate nominal pitch diameter from major diameter and pitch. The purpose is to provide guidelines for dimensional tolerances of common thread standards.

Uploaded by

Richard Hockley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INFORMATION ON STANDARD

M, UNC, PIPE THREADS (G) &


WHITWORTH PLUS PITCH DIAMETER
TOLERANCES
EXTERNAL THREAD
d = Major diameter
d2 = Pitch diameter
d1 = Minor diameter

ISO METRIC
60O
Pitch
PDN
0,5
0.325
0,6
0.39
0,7
0.455
0,75
0,487
0,8
0.52

INTERNAL THREAD
D = Major diameter
D2 = Pitch diameter
D1 = Minor diameter

1
1.25
1.5
1.75

0.65
0.81
0.97
1.14

+
+
+
+

2
2.5
3

1.30
1.62
1.95

+ 0.21 / - 0
+ 0.22 / - 0
+ 0.26 / - 0

- 0.04 / - 0.20
- 0.04 / - 0.21
- 0.05 / - 0.25

3.5
4
4.5
5

2.27
2.60
2.92
3.25

+
+
+
+

5.5
6
8

3.57
3.90
5,20

+ 0.35 / - 0
+ 0.37 / - 0
+ 0.45 / - 0

P = Pitch
= Flank angle
D1 (drill size) can usually be found by subtracting
the pitch size from the major diameter (d/D).
i.e Drill size for M16x2 is 16-2= 14,0 mm
TPI pitches to mm = 25.4/Pitch
i.e. 14 TPI = 25.4/14 = 1,81 mm
Important:
These tables are made as a guideline for
calculating pitch diameter tolerances. As the
primary purpose is to measure with a digital
caliper (and the majority of pitch diameter
tolerances in these tables is more than 0,10
mm), most dimensions are calculated to the
nearest 0.01 mm.
When a tolerance in a table is used, it should
be remembered that the tolerance will often be
slightly larger for a finer pitch than standard.
i.e. the pitch diameter tolerance for M60x2 is
larger than for M36x2, which again is larger
than that for M16x2 which is standard. Using
the tolerances in these tables for a finer thread
than standard will, in most cases, only mean
that the thread is made to a slightly finer
tolerance than necessary.
For exact tolerances use the relevant, approved
standard.
Thread
M16x2
M36x2
M60x2
M120x2

Pitch diameter tolerances


Nut (6H)
Bolt (6g)
+0.212 / -0 -0.038 / -0.198
+0.224 / -0 -0.038 / -0.208
+0.236 / -0 -0.038 / -0.218
+0.250 / -0 -0.038 / -0.228

(0.16)
(0.17)
(0.18)
(0.19)

Nominal Pitch diameter =


Nominal Major diameter - (minus) PDN
i.e. Nominal Pitch diameter for :
M20 x2 = 20.00 - 1.30 = 18.70
and 1-8UNC = 25.4 - 2.06 = 23.34

UNC (ISO Inch)


60O
Pitch
PDN
24
0.69
20
0.825
18
0.92
16
1.03
14
1.18
13
12
11
10
9
8
7
6
5
4
4

Pitch diameter tolerances


Nut (6H)
+ 0.10 / - 0
+ 0.11 / - 0
+ 0.12 / - 0
+ 0.12 / - 0
+ 0.125 / - 0
0.15
0.16
0.18
0.20

0.28
0.30
0.31
0.33

/
/
/
/

/
/
/
/

Bolt (6g)
- 0.02 / - 0.095
- 0.02 / - 0.105
- 0.02 / - 0.11
- 0.02 / - 0.11
- 0.25 / - 0.12

0
0
0
0

0
0
0
0

0.03
0.03
0.03
0.03

0.05
0.06
0.06
0.07

/
/
/
/

/
/
/
/

0.14
0.15
0.16
0.18

0.26
0.28
0.30
0.32

- 0.07 / - 0.34
- 0.08 / - 0.36
- 0.10 / - 0.44

Pitch diameter tolerances


Nut (2B)
+ 0.11 / - 0
+ 0.12 / - 0
+ 0.14 / - 0
+ 0.15 / - 0
+ 0.16 / - 0

Bolt (2A)
-0.025 /- 0.11
- 0.03 / - 0.12
- 0.03 / - 0.13
- 0.03 / - 0.15
- 0.04 / - 0.16

1.27
1.37
1.50
1.65
1.83

+
+
+
+
+

0.17
0.17
0.18
0.20
0.21

/
/
/
/
/

0
0
0
0
0

0.04
0.04
0.04
0.05
0.05

/
/
/
/
/

0.17
0.17
0.18
0.20
0.21

2.06
2.36
2.75
3.30
3.665
4.125

+
+
+
+
+
+

0.22
0.24
0.26
0.30
0.32
0.34

/
/
/
/
/
/

0
0
0
0
0
0

0.05
0.06
0.06
0.07
0.07
0.08

/
/
/
/
/
/

0.22
0.24
0.26
0.30
0.32
0.34

N.B. Please note that d/D for pipe threads (in


the next table) is not the actual diameter.
The diameter stated is the approximate internal
pipe diameter. For example diameter d for a 1
G pipe thread is 33.25 mm.

ISO 228/1-G
55O
Pitch
PDN
19
0.86

Nut
+ 0.125 / - 0

14

1.16

+ 0.14 / - 0

11
op to G2
11
over G2

1.48

+ 0.18 / - 0

1.48

+ 0.22 / -0

Whitworth
55O
Pitch
PDN

ISO INCH GEVIND (UNC)

Pitch diameter tolerances


A
B
A
B
A
B
A
B

+
+
+
+
+
+
+
+

0
0
0
0
0
0
0
0

Relationship between the tolerances

Bolt
/ - 0.125
/ - 0.25
/ - 0.14
/ - 0.28
/ - 0.18
/ - 0.36
/ - 0.22
/ - 0.44

Pitch diameter tolerances


Nut (Normal)

Bolt (Medium)

24
20
18

0.68
0.81
0.90

+ 0.13 / - 0
+ 0.15 / - 0
+ 0.16 / - 0

- 0.03 / - 0.12
- 0.03 / - 0.13
- 0.03 / - 0.14

16
14
12

1.02
1.16
1.36

+ 0.17 / - 0
+ 0.18 / - 0
+ 0.20 / - 0

- 0.03 / - 0.14
- 0.04 / - 0.16
- 0.04 / - 0.17

11
10
9

1.48
1.63
1.81

+ 0.22 / - 0
+ 0.23 / - 0
+ 0.24 / - 0

- 0.04 / - 0.19
- 0.05 / - 0.20
+ 0 / - 0.16

8
7
6

2.03
2.32
2.71

+ 0.26 / - 0
+ 0.27 / - 0
+ 0.30 / - 0

+ 0 / - 0.17
+ 0 / - 0.18
+ 0 / - 0.20

5
4
4

3.25
3.61
4.07

+ 0.33 / - 0
+ 0.35 / - 0
+ 0.37 / - 0

+ 0 / - 0.22
+ 0 / - 0.23
+ 0 / - 0.24

Tolerance class 2A is the foundation


1A = 1,500 x 2A
2A = 1,000
3A
1B
2B
3B

=
=
=
=

0,750
1,950
1,300
0,975

x
x
x
x

2A
2A
2A
2A

Example :

ISO METRIC
Tolerance positions and classes
for ISO metric screw threads
Nut

On a -13 UNC-2A screw the pitch diameter


tolerance is 0,127 mm
Allowance from the nominal pitch diameter for
2A and 1A is 0,127 x 0,3 = 0,038
i.e. 0.3 x 2A pitch diameter tolerance
1A
3A
1B
2B

+
0

is
is
is
is

0,127
0,127
0,127
0,127

x
x
x
x

1,5= 0,1905
0,75= 0,095
1,950 = 0,248
1,300 = 0,165

Bolt
H is standard for nuts & g is standard for bolts

WWW.FMS-DK.COM
WWW.F-M-S.DK

L8.9E

You might also like