Scribd
Upload
158 views3 pages

TD Sad-M 03 180 e 15

This document provides technical specifications for a pneumatic double-piston 180° actuator. The actuator uses a rack-and-pinion system to achieve a fixed rotation angle of 0° to 180° with a 90° middle position. It is designed to operate using dry, filtered compressed air between 2-8 bar and works within an ambient temperature range of -25°C to +80°C. The actuator requires no maintenance provided it is properly mounted and used in normal conditions with clean air as specified.

Uploaded by

joseocsilva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
158 views3 pages

TD Sad-M 03 180 e 15

This document provides technical specifications for a pneumatic double-piston 180° actuator. The actuator uses a rack-and-pinion system to achieve a fixed rotation angle of 0° to 180° with a 90° middle position. It is designed to operate using dry, filtered compressed air between 2-8 bar and works within an ambient temperature range of -25°C to +80°C. The actuator requires no maintenance provided it is properly mounted and used in normal conditions with clean air as specified.

Uploaded by

joseocsilva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DOUBLE-PISTON QUARTER TURN ACTUATORS

TYPE SAD - M 180

Technical Data
Design :
Design features :
Angle of rotation :
Air pressure supply :
Operating medium :
Ambient temperature :
Mounting position :
Resistance to corrosion :
Lubrication :
Seals :
Coatings :
Maintenance and inspection :

Pneumatic double-piston 180 actuator with a 90 middle position


Rack-and-pinion system, piston guide via guide rods
Fixed rotation angle 0 to 180 (normal operation)
Pneumatic fixed 90 middle position
min. 2 bar, max. 8 bar
Dry and filtered compressed air
-25C to +80C
any
Industrial atmosphere
Life time lubrication with grease
ISO 51825-K2K-30
NBR-O-Rings, 70 Shore
Housing anodized and colour sealed
End caps - CED Cathodic electrodeposition
AMG actuators are free of maintenance within the life time.
Provided that:
the actuator is properly mounted

the operating medium used is clean and non-aggressive

the actuator is operated under normal ambient conditions

the actuator is used in compliance with the intended use

SAD - M 180

(see assembly and maintenance manual)

Applied standard :

DIN EN ISO 5211, DIN EN 15714-3, VDI / VDE 3845, DIN 79

AMG-PESCH GmbH
Otto-Hahn-Strae 23
D - 50997 Kln
Tel.:+49-(0) 22 36 - 89 16 - 0
Fax:+49-(0) 22 36 - 89 16 - 73
[email protected]
www.amg-pesch.com

SUBJECT TO TECHNICAL MODIFICATION

MB SAD - M 180 / 2013 / EN / 01

DOUBLE-PISTON QUARTER TURN ACTUATORS

TYPE SAD - M 180


Control for SAD-M 180 BR03 with 3x 3/2 - way solenoid valve
drawn at 90 center position

switch position
from - to

Control for SAD-M 180 BR03 with 1x 3/2 - way and 1x 5/3 - way solenoid
valve
drawn at 90 center position

switch position
from - to

AMG-PESCH GmbH
Otto-Hahn-Strae 23
D - 50997 Kln
Tel.:+49-(0) 22 36 - 89 16 - 0
Fax:+49-(0) 22 36 - 89 16 - 73
[email protected]
www.amg-pesch.com

SUBJECT TO TECHNICAL MODIFICATION

MB SAD - M 180 / 2013 / EN / 01

DOUBLE-PISTON QUARTER TURN ACTUATORS

Design

TYPE SAD - M 180

Size

15

A
A1
B

407
447
116

C
D

111
20

E
F

56
61

G
H

50
40

64

L
J

28

M
N

93

0,5

12

0,5

22

SW
Connection
ISO 5211

12

Size

15

Weight [kg]
Type SAD - M

7,3

Stroke volume [dm]


1,6

Type SAD - M

Operating times [sec.]


Type SAD - M

OPEN

Type SAD - M CLOSE

1)

SAD - M

44
80

d2

Type

number
of
springs
n

springtorque
Ms [Nm]

air torque Ma [Nm] at operating pressure pe [bar]


2 bar

2,5 bar

3 bar

3,5 bar

4 bar

4,5 bar

5 bar

5,5 bar

6 bar

23

29

36

42

49

55

62

68

75

50

d4 x h3
Number of
screws
h4
6,5 bar

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX

SAD-M
15

35

d3

1) operating times at 4,5 bar air pressure


supply without load (standard values)

82

7 bar
MIN

MAX

88

7,5 bar
MIN

MAX

94

8 bar
MIN

MAX

l3
s

F05

M6x10

4
3
16
14

101

AMG-PESCH GmbH
Otto-Hahn-Strae 23
D - 50997 Kln
Tel.:+49-(0) 22 36 - 89 16 - 0
Fax:+49-(0) 22 36 - 89 16 - 73
[email protected]
www.amg-pesch.com

SUBJECT TO TECHNICAL MODIFICATION

MB SAD - M 180 / 2013 / EN / 01

You might also like