Garrett PD 6500i
Made in the USA
Enhanced Pinpoint Walk-Through Metal Detector
Multi-brand compatibility
Advanced broadband technology
Can be added to existing checkpoints
without having to replace other brand
units. Includes multiple channels and
2,300 selectable operating frequencies.
Analyzes targets across a broad range of
frequencies for greater accuracy. Provides
superior ferrous and non-ferrous detection.
Improved discrimination means fewer false
alarms and higher throughput.
Optimum Performance
More accurate pinpointing
More than 20 standard program settings
scientifically engineered to address the
needs of airports, courthouses, prisons,
schools, facilities, special events, mass
transit, loss prevention, and other
applications.
With more than four times the detection coils
of competitive models, the PD 6500i provides
uniform detection and precise pinpointing.
Independent zone indicator lights on both
side panels identify not only height but also
left, center and right locations for one or more
objects passing through the archway.
Dual-sided detection
This unique bilateral technology has
transmitters and receivers in each side panel
to allow scanning from both sides, resulting
in uniform detection throughout the archway.
It also provides superior noise cancellation
resulting in easier setup (i.e. no need to rotate
the unit to avoid interference from nearby
equipment such as other metal detectors or
x-ray machines).
Pacing lights
Universal wait and proceed symbols at
the detector entrance for traffic controls.
Superior versatility
Menu based settings for feature selection
such as alarm indication, count method, and
language without the use of a computer.
Field programmable to allow system
upgrades. Multiple units can be installed as
close as 2 inches.
Advanced networking (optional)
Manage walkthroughs individually or as
groups and perform statistical analysis
via network with CMA interface module.
Supervisors can remotely access controls,
visual alarms and statistics.
Directional counter
International security standards
Four settings for counting patrons:
forward only, reverse only, subtract
in reverse, and bidirectional.
PD 6500i meets the worlds highest
test certifications, including the
following international airports:
PD 6500i
Walk-Through Metal Detector
(shown) Gray
TSA
ECAC
(U.S.
airports)
(European
airports)
(Spanish
airports)
(Japanese
airports)
STAC
(French
airports)
U.S. / INTERNATIONAL
PN 1168414 / 1168424*
OPTIONAL accessory items for the PD6500i can be seen at www.garrett.com.
CJIAC
DfT
(U.K.
airports)
* Includes Euro Plug.
Tamper-proof
All settings are secured with a key lock and
two levels of access codes. Further security
is accomplished with a cabinet lock that
prevents unauthorized access to physical
cables, connectors and electronics.
Easy assembly
The PD 6500is modular design allows for
a quick and simple assembly of its four (4)
sub assemblies using only eight (8) screws
and three (3) internal cable connections.
Digital Signal Processor (DSP)
based technology
DSP provides greater sensitivity, noise
immunity, discrimination, detection uniformity, and overall product reliability.
Regulatory Information: The PD 6500i meets U.S. and international regulatory requirements for electromagnetic safety. Extensive research has found no information that would indicate Garrett products have
adverse effects on pregnancy, medical devices (such as pacemakers) or magnetic recording media. However, directives by physicians and medical device manufacturers regarding metal detectors should be followed.
1554400 REV L, April 2016 2016 Garrett Electronics, Inc.
Garrett PD 6500i
Enhanced Pinpoint Walk-Through Metal Detector
Meets the worlds highest test certifications
Garretts PD 6500i is an industry leader
with superior pinpoint technology and
unmatched discrimination features. This
detector has proven its effectiveness
at moving high volumes of patrons
through such events such as the Olympic
Games, World Cup 2010 South Africa,
and the Pan-American Games in Mexico.
The PD 6500i has also been trusted to
safeguard international airports, hotels,
government buildings, and correctional
facilities. With its advanced networking
and ability to pinpoint targets in 33
detection zones, the PD 6500i is the
walk-through of choice for security
professionals worldwide.
Standard Programs
Over 20 application programs included
Sensitivity
Up to 200 distinct sensitivity levels
Zone Indications
33 independent zones
Meets IP55 Standards
For moisture, foreign matter protection
Overhead Control Unit
All electronicsLCD, alarm light,
LED bar graph, control touch pads
integrated to eliminate wire exposure.
Tamper-Proof Settings
Three access levels of security clearance
Self Diagnostic Program
Complete and automatic
Zone Sensitivity Boost
Adjustable in six areas
Battery Pack (optional)
10-hour or 30-hour backup available
Warranty
24 months, Limited Parts/Labor
Passageway Interior Size
Width 30" (0.76 m)
Height 80" (2.03 m)
Depth 23" (0.58 m)
Overall Exterior Size
Width 35" (0.90 m)
Height 87" (2.21 m)
Depth 23" (0.58 m)
Shipping Size
Width 35.5" (0.90 m)
Height 91.5" (2.32 m)
Depth 6.25" (.16 m)
Shipping Weight
165 lbs. (74 kg)
Temperatures
Operating: -4 F (-20 C) to +149 F (65 C)
Humidity to 95% non-condensing
Storage: -40 F (-40 C) to 158 F (70 C)
Power
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 45 watts;
no rewiring, switching or adjustments needed.
Regulatory Information
Meets TSA requirements for U.S. airports, ECAC, STAC,
AENA, CJIAC and DFT for international airports. Meets
Electrical Safety and Compatibility Requirements for CE,
FCC, CSA, IEC, ICNIRP and IEEE.
Weatherproofing
Meets IP 55, IEC Standard. Degrees of Protection
provided by Enclosures, IEC 529. *IP 65 optional.
Construction
Attractive scratch and mar-resistant laminate. Detection
Heads and Support: heavy duty aluminum.
Control Outputs
Solid state switches (low voltage AC or DC) for operating
external alarms and control devices.
Remote Control (optional)
Desktop Remote Control with Zone Indication and/or via
network with CMA Interface Module.
Networking (optional)
Manage individual or groups of walkthroughs and
perform statistical analysis of throughput.
Alarm Indicators/Random Alarm Feature
33 zones, volume-adjustable audible tone, bright
LED visual and remote alarms. Random alarm feature;
adjustable from 0 to 50 percent.
PD 6500i is an Approved Product for Homeland Security
under the SAFETY Act.
Beige
U.S. / INTERNATIONAL
PN 1168411 / 1168421*
PD 6500i
Walk-Through Metal Detector
U.S.A. / International
Description
1168414 / 1168424*
PD 6500i
30" (as shown)
Color
1168411 / 1168421*
PD 6500i
30"
1168416 / 1168426*
PD 6500i
EZL
Gray
1168412 / 1168422*
PD 6500i
EZL
Beige
1168432 / 1168427*
PD 6500i
32.5"**
Gray
1168433 / 1168429*
PD 6500i
32.5"**
Beige
Gray
Beige
Other options (such as IP 65 models) also available.
* Supplied with Euro plug.
EZLStandard 30" clearance with zone lights on both the entry and
exit sides, allowing the operator to view the alarmed object from
any position.
** 32" ADA-compliant passageway
1.800.234.6151 (USA and Canada)
1.972.494.6151
1881 W. State Street
Garland, TX 75042
Email:
[email protected]Made in the USA
