VOCATIONAL EDUCATION RESOURCES

Engine Training kits

Textbooks
Course Outlines
DVDs, CBTs, PowerPoints
INSTRUCTOR TRAINING
ON-LINE SALES CATALOG

N o b od y P rovides M ore
T rainin g R esou R ces O n S mall E n g ines

Thank you for your interest in Briggs & Stratton

Vocational Education Programs and Teaching Aids.
This catalog will provide you with the most comprehensive line up of
small engine Vo-Ed teaching supplies available.
Use the order form on page 32 and 33 for pricing
and ordering information.
(Prices subject to change without notice)

Customer Education Mission

We will lead in providing our global base of customers with a broad range
of high value training platforms for corporate products,
and for the related needs of our customers.
We will build stronger customer relationships through respecting
our customers financial investment and their time in acquiring
knowledge and competence on our products.
In pursuing this mission, we achieve a stronger product support
network, enhance our brand equity and industry leadership
position, build value and add to our customers success.

TABLE OF CONTENTS

INTRODUCTION
Historical Precedent, Briggs & Stratton Educational Philosophy & YOU

Air-Cooled Engine Industry Opportunities

Your Role

2
3
4

TRAINING KITS

Basic Starter
CE9001 OHV Engine
CE9028 OHV Engine Upgrade Module
CE9039 L-Head Engine
CE9040 OHV Engine
CE9041 OHV Engine Replacement
CE9042 Portable Generator
CE9047 L-Head Replacement
CE9015 Alternator
CE9018 Ignition Armature
CE9024 Single Circuit Carburetor
CE9025 Dual Circuit Carburetor

TEACHING AIDS
Literature

Theory Programs - Video Cassettes/DVD

Maintenance & Troubleshooting - Informational Video Cassettes/DVD
Computer Based Training CDs
Power Point Training CDs

FACTORY SERVICE TRAINING

Advanced Engine Technology

Advanced Electrical & Fuel Delivery Systems

Vo-Ed Teachers Training
Course Amenities, Schedules & Fees
Authorized Field Service Schools, Product Update Seminars & EETC
Factory Service Training Courses Application

MISCELLANEOUS
Basic Training Starter Kit Application

Engine Donation Form

On-Lines Sales Catalog
Tools
Order Form & Price List

5
6
8
8
10
10
12
12
14
14
14
14
15
16
18
20
21
22
23
24
25
26
27
28
29
30
31
32

INTRODUCTION
A Historical Precedent...Transition to End Products
In the early 1950s, the same demographic changes that caused a need for new
neighborhoods and schools, created the beginnings of a market for air-cooled engines.
Mass migration to new homes in urban and suburban areas and
new demands for leisure time called for the work and time saving
advantages of engine powered lawn and garden equipment.
But a market without a product creates a problem that begs a
solution. What was needed were lightweight, reliable, reasonablypriced engines that could be produced in high volumes without
jeopardizing quality.
In 1953, Briggs & Stratton developed and introduced the first
aluminum alloy 4-Cycle engines mass-produced in the United
States. Eventually, other manufacturers entered the field to find
their share of the market.
Whole new industries were spawned to build the products
powered by these engines. Today Briggs & Stratton is the largest
air-cooled engine manufacturer in the world . . . having built over
200 million aluminum alloy engines of various horsepower ratings
to date. Therefore, we feel especially proud and responsible to
provide educational support to schools with bona fide interests in
air-cooled engine repair courses.

And the story continues. In the late 1990s a significant shift

occurred in Briggs & Strattons corporate business strategy
due to changing global industry dynamics. Today, Briggs &
Stratton is driven from being primarily an engine manufacturer
to OEMs to a greater emphasis on end users, consumers and
growth through acquisitions. Looking forward, Briggs & Strattons
continued success will come from producing engines and also
from integrating our engines into power product equipment, some
branded Briggs & Stratton.

Briggs & Stratton Educational Philosophy and You

But how does this relate directly to you? . . . your school? . . . your students?

Curriculum relevancy becomes increasingly important as

school budgets are being squeezed by inflation and reduced
tax revenues. Therefore, if you are considering introducing
or expanding Air-Cooled Engine Technology and Repair
Courses in your curriculum, we believe that you are on solid
ground to do so.

Some examples include:

Engine powered products are household items in every

community. Whether your students are interested in aircooled engines in order to better understand their own
engine powered equipment, or as a vocational elective,
Briggs & Stratton would like to assist you in your efforts.

Linear and rotary motion (Physics)

Offering a program in small engines will help to reinforce

many of the core educational subjects. Students will be
exposed to Reading, Mathematics, Chemistry, and Physics.

How gasoline changes from a liquid to a

vapor (Science)
How gasoline provides heat energy
(Chemistry)
Torque as a measurement of force (Physics)
How to measure materials to within .001 of
an inch (Mathematics)
How to use a repair manual (Reading)
And many more...

Briggs & Stratton is fully committed to assisting educational

institutions willing to offer soundly structured courses, teaching
Air-Cooled Engine Theory and Repair Techniques.
Perhaps this commitment is best exemplified by the over 70,000
engines Briggs & Stratton has given to schools for use in their
courses relating to Air-Cooled Engine Theory and Servicing.
These standards are now global in nature. Revamping a
program to reflect current technology can be expensive,
particularly at a time when budget dollars seem to be receding.
Not reacting to changes in technology leaves your students less
prepared and therefore less attractive to industry as they enter
the job market.

INTRODUCTION

All of these concepts can help the teacher and the school with a program that the
students will enjoy learning, and help to meet the state and federal accountable
learning standards.

The purpose of this catalog is to provide instructors with

information about the Vocational Education Courses and
Teaching Aids that Briggs & Stratton makes available.
To find more information on the internet, go to

www.ThePowerPortal.com
User ID: voed_schools
Password: briggs
Nobody Provides More Training Resources on Small Engines

Air- Cooled Engine Industry Opportunities

Each year there are more air-cooled engines produced in the United States
than automobiles.
Over 16,000,000 engines under 20 HP are manufactured
annually. Most of these engines power a variety of outdoor
power equipment from mowers to tillers to tractors. Millions
more operate pumps, generators, small construction equipment,
log splitters, truck refrigeration units . . . almost anything
requiring portable power.
A very conservative average engine life of five years,
considering all applications, provides more appreciation of this
gigantic engine population representing a potential market for
service during any one year of 100,000,000 engines. But engine
numbers are only part of the challenge.
As engine technology advances and engine-powered equipment
becomes more complex, the skill level of service technicians
also needs to increase. These demands affect future service
technicians produced by vocational and trade schools, and the
schools, as well. We believe that you, the instructors, are drawn
to this challenge.

Your Role . . .
The total challenge calls for greater commitment to competency from all of us.
Driven by modern technology and government emission
regulations, todays technician is a skilled individual. The image
is no longer one of a part time mechanic operating out of his
garage during the summer season.
Todays air-cooled engine repair business is a dual one...where
parts and equipment sales are profit sources along with engine
and outdoor power equipment repair services.
Not only are many service technicians highly competent
mechanics, but astute business managers as well. Bright young
people who are your students today may well be our industrys
profit-minded service dealers tomorrow.
Whether they are or not, depends, to some extent, upon you.
As instructors, you may have opportunities to direct vocational
school students to those courses that equip them for both
facets of the air-cooled engine industry - product sales and
service. At the very least, you can advise your students about
the opportunities and challenges in this growing outdoor power
equipment sales and service market.
As is the case with most vocational courses, Air-Cooled Engine
Theory and Repair courses are not designed to produce
finished technicians. Their purpose is to provide a solid base
which serves as a springboard into work situations which then
provide on-the-job experience and growth. Additional training
for these new employees, as well as experienced service
technicians, is available from the engine and equipment
manufacturers field and factory schools. These continuing
education programs keep both new and experienced service
technicians abreast of new engines, equipment and the latest
repair techniques.
The proliferation of equipment types and applications has
provided the seasonal stability required to attract serious-minded
people in even greater numbers to become service technicians.
In air-cooled engine servicing, as in many other occupational
pursuits, pay is dependent on skill, attitude, and to some extent,
prevailing local labor rates. If you are not already aware of
the respectability and stability of air-cooled engine repair as
a full-time occupation, hopefully this catalog will provide the
information you and your student may need.
As instructors, you can serve them well by presenting the right
perspective on the challenges offered by our industry and, you
can do this in all honesty without hesitation. For those of you
who are not born mechanics, or have been newly recruited to
establish an air-cooled engine course at your school . . . you can
become a more qualified instructor if you are willing to invest a
little time and study in the necessary subjects.

Briggs & Stratton is the worlds largest manufacturer of small air-cooled engines. We
are also the leader in providing a diverse line of educational training kits to support
your programs. Nobody Provides More Training Resources on Small Engines.
We have many different levels of kits to match your needs. Whether your program is brand new, and you
need a starting package, or a seasoned school looking for more advanced material, Briggs & Stratton has the
educational materials for you.
There are 4 levels of kits available all reasonably priced with school budgets in mind:
Basic Training Starter Kit - Provided at no charge by Briggs & Stratton.
Includes one engine, repair manuals and instructors Power Point CD on basic engine theory.
Entry Level Kits - Contain 2 engines, textbooks, workbooks, basic tools and instructorss materials.
Intermediate Level Kits - Provide additional resources to supplement the Entry Level Kits.

TRAININGKITS

TRAININGKITS

Advanced Level Kits - Contain engines or equipment for providing a complete in-depth program.

Basic Starter Training Kit

NORTH AMERICA ONLY

This kit is Briggs & Strattons traditional Engine Donation Program. Once every three (3) years, an educational
facility can apply for and receive one Briggs & Stratton engine at no charge. In addition to the engine donation,
a case quantity (approx. 26) of Single Cylinder 4-Cycle Repair Manuals and a CD containing a Power Point
presentation on 4-Cycle theory is provided. This kit is supplied by Briggs & Stratton at no cost to the school.

Requirements . . .

To participate, a school must meet all of the following:

1. Have an on-going course in air-cooled gasoline
engine theory and/or repair. This course may be
either stand alone or part of a broader curriculum
in which air-cooled gasoline engine operation and
servicing is a major component. Fill out the Basic
Training Starter Kit application on page 28.
2. Agree that the no-charge materials supplied
by Briggs & Stratton are the exclusive property
of the school and are not to be considered as
belonging to any individual instructor.
3. Welcome any visitation by a Briggs & Stratton
representative wishing to review the use of
this material.
4. Return signed, Engine Donation Agreement Form
provided on page 29.
Note: Fees may be required in Canada.

Briggs & Strattons Contribution . . .

If the above criteria are met, you will receive from

Briggs & Stratton:
1. One engine of Briggs & Strattons choice.
2. Repair Instruction Manuals shipped in a case,
quantity approximately 26 manuals per case,
1 case per donation.
3. A CD containing a PowerPoint presentation on
4-Cycle Theory, carburetion, compression and
governing systems. Part # CE3017 (pg. 22)

Renewal, Every 3 Years . . .

After three (3) years, a school may reapply for

the same basic donation package. Renewal is not
automatic. The instructor or school administrator must
reapply every three (3) years.

How to Apply for Kit . . .

If a school qualifies and wishes to participate in

the Briggs & Stratton Basic Training Starter Kit, the
instructor must complete the following:
1. Write a brief course outline on school letterhead
describing how the donated materials will be used
in the classroom.
2. Complete the forms on page 28 and 29.
3. Forward both the course outline and the
completed application forms to:
Briggs & Stratton Corporation
Attn: Customer Education Department
Vo-Ed Programs
P.O. Box 702
Milwaukee, WI 53201-0702
Fax: (414) 259-5214
Be sure to include the full official name and address
of the school which will be using the material.
Note: Engine, repair manuals and CD will be
shipped freight pre-paid. Please allow 30 to 60 days
for delivery.
*Please see page 29 for further information about
this program.

CE9001 OHV Engine Training Kit

ADVANCED KIT - Complete Curriculum for 20 students
This complete course curriculum is refined from the
Briggs & Stratton Authorized Field Service School, the
most widely acclaimed small engine training program in
the industry. Developed from years of training experience
and built around a textbook written by the Briggs &
Stratton Customer Education Department, you are
assured a thorough, in-depth study of Briggs & Stratton
engines. In addition to the curriculum, a 4 day Vo-Ed
factory training course is included for your instructor
at the Briggs & Stratton Customer Education Center
in Milwaukee, Wisconsin (excluding transportation and
lodging). Once trained with curriculum in place, the
instructor will be able to provide a comprehensive and
accurate small gasoline engine program for the student.
It has been our experience that the number of hours specified for air-cooled engine training varies as much
as the goals of each respective program. For this reason, a lesson plan is not included. It is relatively simple
to construct a custom made program based on your needs from the textbook table of contents or your
experiences at the instructor training session. For best results, instructors should have some air-cooled engine
or automotive/motorcycle/marine engine experience.
Industry advice, ongoing technical support, discounted parts, and engine purchases are available through
the Integrated Distributors Network in North America, see back cover. Information such as parts look-up and
service bulletins are available online at www.ThePowerPortal.com.
The computer is no stranger to this industry.
Included in this package is CE3060 Product Knowledge Computer Based
Training (CBT) CD, an entry level program which identifies and defines
external and internal engine components, a CD containing video and
Power Point presentations, and outlines for the instructor to develop
competence.
Why Briggs & Stratton? You cant find a more comprehensive small air-cooled
engine course anywhere. The combination of textbooks, student
workbooks, repair manuals and audio/visual training aids allows
tremendous leeway in how to teach various subjects. The heavily illustrated textbook
is the why, the repair manuals the how and the workbooks containing the student
labs are the reinforcement.
Please bear in mind that the instructor training offered includes the school
and lunch each day. You will be responsible for transportation to and from
Milwaukee as well as lodging and any incidental costs. Transportation from
the hotel to Briggs & Stratton will be provided. (See page 27 for school
dates and application.) Visit our website to view our list of educational
opportunities.

www.ThePowerPortal.com
User ID: voed_schools
Password: briggs

Note: Some fees may apply for orders shipped outside the continental
United States. Call for information.

ITEM

DESCRIPTION

PART #

QTY

Engines

Overhead Valve Intek Engine

121332-0036-E2
(or similar model)

10

Gasket Sets

Complete Engine Gasket Sets

791797

10

Gasket

Crankcase Cover

699485

20

Gasket Kit

Valve Overhaul Gasket Kit

791798

20

Valve Guide

Guide, Exhaust

699643

20

Valve Guide

Guide, Intake

63709

40

Exhaust Valve

Exhaust Valve

296676

20

Intake Valve

Intake Valve

296677

20

Flywheel Key

Flywheel Key

222698S

20

Cylinders

Valve Work Cylinders

CE9002

Repair Manual

Single Cylinder L-Head

270962

26

Repair Manual

Twin Cylinder L-Head

271172

Repair Manual

Vanguard V-Twin OHV

272144

Repair Manual

OHV Single Cylinder

272147

28

CD

IPL Data

MS5637

CD

4-Cycle Theory (Power Point)

CE3017 (pg. 21)

CD

Fuel Delivery Systems (Power Point)

CE3056 (pg. 21)

CD

OHV Engine Instructors Reference

CE3094 (pg. 21)

Book

Small Engine Care & Repair

274041 (pg. 15)

Textbook

Small Engines Textbook

CE8020 (pg. 15)

20

Workbook

Small Engines Workbook

CE8021 (pg. 15)

20

Workbook Answer Key

Small Engines Workbook Answer Key

CE8022 (pg. 15)

Training

Vo-Ed Factory School

N/A

Video Training Library

4-Cycle Theory
Theories of Operation I
Theories of Operation II

CE3070 (pg. 16)

CE3013 (pg. 16)
CE3029 (pg. 17)

Neway Valve Seat

Cutter Kit

Refinish Valve Seats

19547

Valve Guide Repair Kit

Remove and Install Valve Guides

19269

Basic Tool Kit

Basic Specialty Tools

19300 (pg. 31)

Product Knowledge

CD-ROM Training in Parts Identification

CE3060 (pg. 20)

9001

CE9001 OHV Engine Training Kit Parts List

Note: Red Bold Italicized items are considered consumable and will need to be replenished on a regular
basis. Contact your regional Integrated Distributor for discount structure and cost. These engines are
now equipped with metric fasteners.

See pages 32 and 33 for ordering and pricing.

CE9028 OHV Engine Upgrade Module Training Kit

OUR BEST SELLER! The Overhead Valve Upgrade Module is an excellent way for
schools with established air-cooled engine programs to upgrade to more
modern components.
Our best selling kit is perfect for schools that have an
exisitng small engine program. This kit provides engines
and resource materials to schools that have the necessary
tools already in place and helps schools come up to
current technology.

CE9039 L - Head Engine Training Kit

ENTRY LEVEL KIT - Most widely used engine for walk-behind lawn mower application.
CE9039 is designed for schools needing an entry level kit. Small
class sizes will appreciate the ability to get hands on experience
on the most widely used walk-behind lawn mower engine. The
kit includes a CD to aid the instructor in the presentation of small
engines while enhancing the student experience.

ITEM

DESCRIPTION

PART #

QTY

121332-0036-E2
(or similar model)

10

Engines

Overhead Valve Intek Engine

Support Parts

Gasket Sets

791797

10

Support Parts

Crankcase Cover Gasket

699485

20

Support Parts

Valve Gasket Kit

791798

20

Support Parts

Flywheel Key

222698S

20

Specialty Tool

Flywheel Puller

19203

Specialty Tool

Flywheel Strap Wrench

19433

Specialty Tool

Ring Expander

19340

Specialty Tool

Piston Ring Compressor

19070

Repair Manual

OHV Single Cylinder

272147

28

Power Point CD

4-Cycle Theory

CE3017 (pg. 21)

Power Point CD

Fuel Delivery Systems

CE3056 (pg. 21)

CD

OHV Engine Instructors Reference

CE3094 (pg. 21)

9028

CE9028 OHV Upgrade Module Training Kit Parts List

Note: Red Bold Italicized items are considered consumable and will need to be replenished on a regular
basis. Contact your regional Integrated Distributor for discount structure and cost. These engines are
now equipped with metric fasteners.

ITEM

DESCRIPTION

PART #

QTY

12J802-2915-B1
(or similar model)

274041 (pg. 15)

270962

Engines

6 HP L-Head Vertical Engines

Repair Manual

Small Engine Care & Repair Books

Repair Manual

L-Head Repair Manuals

CD

L-Head Engine Instructors Reference CD

CE3093 (pg. 21)

Video Cassette

4-Cycle Theory Video

CE3070 (pg. 16)

Video Cassette

Theories of Operation Video

CE3013 (pg. 16)

CD

Product Knowledge CD

CE3060 (pg. 20)

Textbook

Small Engines Textbook

CE8020 (pg. 15)

Workbook

Small Engines Workbook

CE8021 (pg. 15)

Workbook Answer Key

Small Engines Workbook Answer Key

CE8022 (pg. 15)

Tools

Basic Tool Kit

19300 (pg. 31)

Tool

Torque Wrench

19393

See pages 32 and 33 for ordering and pricing.

9039

CE9039 L - Head Engine Training Kit Parts List

CE9040 OHV Engine Training Kit

Used in generator, pressure washer, roto-tiller, and other applications.
CE9040 is also designed for schools needing an entry level kit.
Students will gain knowledge on these popular Overhead Valve
Engines and is designed for small class sizes. The kit includes a
CD to aid instructors in the presentation of small engines while
enhancing the student experience.

CE9041 OHV Engine Replacement Training Kit

Use this kit to economically replace engines in the OHV Engine Training Kit or OHV
Engine Upgrade Module.

Schools are required to have already purchased CE9001 (pg. 6)

or CE9028 (pg. 8) before obtaining CE9041. This kit comes
with the new Instructors CD to further enhance the students
learning experience.

10

ITEM

DESCRIPTION

PART #

QTY

121332-0036-E2
(or similar model)

274041 (pg. 15)

Engines

Overhead Valve Intek Engines

Repair Manual

Small Engine Care & Repair Books

Repair Manual

OHV Repair Manuals

272147

CD

OHV Engine Instructors Reference CD

CE3094

Video Cassette

4-Cycle Theory Video

CE3070 (pg. 16)

Video Cassette

Theories of Operation Video

CE3013 (pg. 16)

CD

Product Knowledge CD

CE3060 (pg. 20)

Textbook

Small Engine Textbook

CE8020 (pg. 15)

Workbook

Small Engine Workbook

CE8021 (pg. 15)

Workbook Answer Key

Small Engine Workbook Answer Key

CE8022 (pg. 15)

Tools

Basic Tool Kit

19300 (pg. 31)

Tool

Torque Wrench

19393

ITEM

DESCRIPTION

PART #

QTY

Engines

Overhead Valve Intek Engines

121332-0036-E2
(or similar model)

CD

OHV Engine Instructors Reference CD

CE3094 (pg. 21)

See pages 32 and 33 for ordering and pricing.

9041

CE9041 OHV Engine Replacement Training Kit Parts List

9040

CE9040 OHV Engine Training Kit Parts List

11

CE9042 Portable Generator Training Kit

With recent severe weather events more technicians are needed to service generators.
This kit effectively teaches generator theory and repair by
including everything needed to make a complex subject simple. An
Instructorss DVD contains the theory on how electricity is produced,
along with how to test, and troubleshoot the unit. Both the generator
and the engine are covered in great detail.

CE9047 L - Head Engine Replacement Training Kit

This kit can be used for schools that have an existing program for L-Head
style engines.

CE9047 enables a school to have a cost effective solution to replace

worn out training engines and comes with a new Instructors CD to
further enhance the students training experience.

12

ITEM

DESCRIPTION

PART #

QTY

Generator

3,500 Watt Generator w/Brush Bridge Regulator

030208

Generator

4,000 Watt Generator w/AVR Regulator

01932

Repair Manual

Portable Generator Repair Manual

86262GS

DVD

Portable Generator Instructors Reference

CE3095 (pg. 21)

Tool

Digital Tach & Hourmeter

19389 (pg. 31)

Tool

Digital Multimeter

19581X

Tool

Capacity-Frequency Meter

19543

Repair Manual

Rotor Stator Resistance Manual

87971GS

ITEM

DESCRIPTION

PART #

QTY

Engines

6 HP L-Head Vertical Engines

12J802-2915-B1
(or similar model)

CD

L-Head Instructors Reference

CE3093 (pg. 21)

See pages 32 and 33 for ordering and pricing.

9047

CE9047 L - Head Engine Replacement Kit PartsList

9042

CE9042 Portable Generator Training Kit PartsList

13

CE9015 Alternator Training Kit

Contains 9 of our most common charging system stators
(alternators) and 3 solid state regulators (2 full wave and 1
half wave). Can be used to teach electro-magnetic induction,
half and full wave rectification in general and/or review
charging systems specific to Briggs & Stratton.

CE9018 Ignition Armature Training Kit

Contains loose, production components used to build the
Magnetron solid state ignition armature. One kit equals 4
armatures. Use these kits to support ignition theory as the
internal coil windings and electronics are clearly visible.
Includes detailed information on ignition theory and operation
of Briggs & Stratton ignition armatures from contact point
systems through the advancing Magnetron ignition armature.

CE9024 Single Circuit Carburetor Training Kit

This is a primer style bowl carburetor with a high speed
circuit only. One kit equals 4 carburetors. These parts are
captured off the manufacturing line before assembly. None
of the pressed in components are installed allowing better
visual access to fuel and air circuits. No support information
included. Purchase CE3029, Advanced Carburetor Theory
Video (pg. 17) to provide additional training reinforcement.

CE9025 Dual Circuit Carburetor Training Kit

This is a choke style bowl carburetor with both high and low
speed circuits. One kit equals 4 carburetors. These parts are
captured off the manufacturing line before assembly. None
of the pressed in components are installed allowing better
visual access to fuel and air circuits. No support information
included. Purchase CE3029, Advanced Carburetor Theory
Video (pg. 17) to provide additional training reinforcement.

14

See pages 32 and 33 for ordering and pricing.

CE8020 Small Engines Textbook, CE8021 Workbook

CE8022 Workbook Answer Key
Written by the Briggs & Stratton Customer Education Dept, and
published by American Technical Publishers, this textbook,
boasting 318 pages and well over 300 illustrations, is the most
detailed theoretical text available. Already on its 2nd printing,
the text is accompanied by a CD-Rom containing Quick
Quizzes, an Illustrated Glossary, Media Clips and additional
Reference Material.

TEXTBOOKS

TEACHING AIDS TEXTBOOKS

Original Equipment Manufacturers produce repair manuals

which supply the how-to for most repair jobs. Few industry or
outside publications provide much in the way of why. Small
Engines concentrates on the theory of operation relating to
all engine systems. Both air-cooled and water-cooled engines
are covered.
Small Engines is supported by a Student Workbook containing
review questions on three different levels addressing the skills
and acquired knowledge of beginners, intermediate students and
those with advanced capabilities.
The Small Engines Workbook Answer Key contains the answers
to the lessons provided in the Student Workbook.

274041 Small Engine Care & Repair Book

For the novice a step-by-step guide to small engine care
and repair. This full color book is 128 pages and includes over
300 color photos and easy-to-follow instructions. Concepts are
introduced that apply to virtually every small engine making this
appealing to a very broad audience. It offers consumers a stepby-step guide for saving money through preventive maintenance
and do-it-yourself repair and includes a troubleshooting section
to easily diagnose common small engine problems. Small
Engine Care & Repair features introductory projects that require
no prior knowledge, as well as advanced projects for the
experienced repair person.

CE8034 Major Engine Failure Analysis Book

This book details the five major causes of engine failures. A
thorough discussion of the how and why of each failure along
with supporting diagrams and photographs assist the technician
in determining engine failures.

See pages 32 and 33 for ordering and pricing.

15

Video Cassettes/DVD
Theory Programs
Video cassette programs are available at a nominal charge. While most of these
video programs have been developed for service dealer schools, these programs can
also serve the needs of students. All video programs are recorded on VHS 1/2"
format cassettes.

CE3070 4 - Cycle Theory Video

This video (6 minutes) is the foundation of understanding how
an engine operates and is the cornerstone of a small engine
class. Basic 4-Cycle theory is described through use of high-end
computer generated graphics. This is a must have item!

CE3013 Theories of Operation Volume 1 Video

This is a series of four distinct programs (64 minutes) looped
onto a single video cassette. These selections cover four basic
topics which are vital to understanding the operation of a 4-Cycle
engine. The four programs are: Carburetor Theory, Valve Theory
and Repair Procedures, Governor Theory and Troubleshooting,
and Electrical System (Alternator Theory).

16

This serves as a companion video (72 minutes) to Theories

of Operation - Volume 1it contains four advanced topics on
a single video cassette. Horsepower and Torque: it explains
torque as a rotational force and horsepower as a calculation of
work performed. Advanced Carburetion Theory: a brief review
of theory and basic carburetor physics followed by state-of-theart computer animated graphics. Troubleshooting Carburetor
Systems: carburetor problems are divided into
three main categoriesstarting problems,
performance problems and leakage. Examples,
tests and repairs are presented as well as Tricksof-the-Trade. Dynamics of Engine Failure is the
fourth topic: see explanation below CE3019.

CE3019 Dynamics of Engine Failure Video

Produced in 3-D graphics and animation, this video (23 minutes)
provides the why behind major engine failures analysis.
Covered in detail are the 5 major failures: Abrasive Ingestion,
Insufficient Lubrication, Overheating, Overspeeding and
Breakage. The material is presented to assemble the evidence
of a failure, whats important to consider, and why the failure
occurred. This information is not commonly found
in most textbooksthese failures represent the
real world in an everyday service shop.

CE3097 Water Pump & Pressure Washer Theory

& Troubleshooting DVD

Video Cassettes/DVD Programs

CE3029 Theories of Operation Volume 2 Video

This DVD (42 minutes) is an excellent presentation on the

operational theory of water pumps and pressure washers.
Various principles of physics, liquids, and creating pressure
differentials are explained in making this equipment work.
3-D and animation graphics clearly document the coordination
of all the operating systems. Understanding the principles
of operation, as well as basic equipment
troubleshooting is covered. Maintenance and parts
nomenclature are also included.

See pages 32 and 33 for ordering and pricing.

17

VIDEOCASSETTEs/DVD
Maintenance & Troubleshooting Programs
CE3001 Maximizing Engine Life
Through Preventive Maintenance Video
The importance of establishing a preventive maintenance
system is the primary message of this video (35 minutes).
Included are explanations of the basic engine maintenance
requirements. Implementing a preventive maintenance system
assures top power delivery and keeps the equipment more
productive over a longer period of time. While the message is
geared for equipment operators and owners, anyone learning
about small engines can benefit from this important information.

CE3064 Quick Check Diagnostics Video

A diagnostic troubleshooting video (10 minutes) using a
procedure based upon an interview process with the customer.
This five minute diagnostic procedure helps to pinpoint what is
wrong with the equipment, saving valuable troubleshooting time.
Applying the procedure is the way to become more productive
it also projects a more professional image to the customer.

18

See pages 32 and 33 for ordering and pricing.

This video (56 minutes) is a collection of several important

service procedures. All the following are covered on a single
video cassette.
Cylinder Resizing (12 minutes) - In addition to the actual
resizing procedure, importance is given to describing the
relationship between the cylinder bore and piston rings as well
as a discussion on cylinder bore wear.
Repairing Rewind Starters (16 minutes) - The classic
3 minute rewind starter repair is demonstrated in
step-by-step detail.
4 HP 2-Cycle Theory of Operation (13 minutes) The third port loop scavenge design is explored.
Electrical Systems: Ignition, Charging &
Starting (15 minutes) - Covers basic theory with
simple troubleshooting as it relates to Briggs &
Stratton electrical systems.

CE3037 Vanguard 3 - Cylinder Water - Cooled Engines

Features & Benefits Video
The video (47 minutes) highlights the main features and
benefits of the 3-Cylinder water-cooled engine family. After a
tour of the engine and a brief explanation of available options,
manuals and warranty, the program goes into detail on twenty
service related subjects.

VIDEOCASSETTEs/DVD Programs

CE3091 Archived Service Information Video

CE3069 Briggs & Stratton Informational DVD

This DVD (50 minutes) is a 2005 release on the updated
Briggs & Stratton story, its history, products and commitment to
supporting customers worldwide. Plant tours are included along
with interviews with key management personnel.

19

COMPUTERBASEDTRAININGCDS
CE3060 Product Knowledge
An interactive CBT program designed to identify
Briggs & Stratton engine parts and briefly explain their function.
Useful for the beginner or student just learning what the engine
components are, their names and general location.

CE3086 10 -12kW Home Generator Systems

This CBT module includes system operations, proper
installation, circuit logic, troubleshooting, test equipment usage
and reference materials. Home Generator Systems have grown
in popularity due to power outages caused by natural disasters
such as ice storms and hurricanes.

CE3092 7kW Home Generator Systems

This CBT module includes system operations, proper
installation, circuit logic, troubleshooting, test equipment usage
and reference materials. Home Generator Systems have grown
in popularity due to power outages caused by natural disasters
such as ice storms and hurricanes.

20

CE3017 Basic Engine Systems

Contains slides of 4-Cycle theory (L-Head and Overhead
Valve), basic carburetion, governors, compression ratio, rings
and cubic inch displacement. Highly recommended for the
beginnerits the cornerstone of a small engine program.

CE3056 Fuel Delivery Systems

Contains slides of diagramming common Briggs & Stratton
carburetors and fuel pump circuits.

CE3093 L - Head Engine Instructors Reference

Includes detailed step-by-step tear down script for the popular
Briggs & Stratton Quantum vertical crankshaft engine,
PowerPoint slides, course outline and photo library to create
customized slides.

CE3094 Overhead (OHV) Engine Instructors Reference

Includes detailed step-by-step tear down script for the popular
Briggs & Stratton model 12 OHV Intek horizontal crankshaft
engine, PowerPoint slides, course outline and photo library to
create customized slides.

CE3095 Portable Generator Instructors Reference

Includes electrical theory, detailed step-by-step tear down
scripts for Briggs & Stratton 3500 watt and 4000 watt
generators, generator and engine PowerPoint slides, test
equipment usage, course outline and photo library to create
customized slides.

See pages 32 and 33 for ordering and pricing.

COMP.BASED TRAINING/POWERPOINT MEDIA

POWERPOINTTRAININGCDS

21

Vo-Ed Instructors
Factory Service Training
Each summer Briggs & Stratton conducts Factory Service Training for Vo-Ed
Instructors. These schools cover not only the operation and theory behind
Briggs & Stratton air-cooled engines, but also offer specific insights in developing
teaching aids such as carburetor cut-aways, and other ideas. There are a number of
additional educational opportunities available to instructors of air-cooled gasoline
engine courses. These schools are conducted at different times during the year.

Advanced Engine Technology

(Dealer Technicians or Advanced Vo-Ed Instructors) - 4 Days
Major engine systems, carburetion, ignition, compression and
lubrication are explored in the kind of detail that satisfies those
that are driven by a yearning to know how a Briggs & Stratton
engine really works.
Youll start your week with a bang by destroying a brand new
engine and springboard straight into failure analysis. The repair
process carries you through individual engine systems.
Youll stop at carburetors for half a day and explore them in
detail. A hands-on approach is used and youll leave able to
understand and identify all the circuits found in modern day
carburetors. Fuels and emissions are reviewed in detail. An indepth troubleshooting exercise follows using running engines with
various bugs.
Another half day is devoted to electrical components, charging,
ignition and starting systems. After a thorough review of electricity
and electrical terms, charging systems are identified, defined and
actually tested for output on running engines. Next, youll delve
into ignition system history, theory and troubleshooting.
Other topics covered are surface finishes, measurements,
compression components and more. Youll get a chance to
practice what youve experienced.
(see page 27 for course application)

22

(Dealer Technicians or Advanced Vo-Ed Instructors) - 4 Days

With an ever increasing volume of electric start engines
equipped with alternators and other electrical devices being
built today, a thorough knowledge of systematic electrical
troubleshooting is required.
The first goal of this program is to remove the FEAR of
electrical components and the servicing of electrical systems.
Many opportunities for service work are lost because a technician
lacks electrical troubleshooting experience and/or has a built-in
fear of tackling electrical problems. After learning the facts about
electricity, we move on to a comprehensive, stair step approach
to learning systematic troubleshooting by understanding why
and how a component works. Then you move on to the
actual function with hands-on learning. The technician will
gain confidence and increase their ability to do systematic
troubleshooting following the step-by-step approach to learning.
Many hours of valuable hands-on training will transform what
appears to be very complicated systems into a series of very
manageable troubleshooting exercises. Electrical systems will no
longer be the mysterious black hole they once appeared to be.
For a change of pace, the second part of this program is spent on
fuels and carburetion. Fuels, emissions and carburetor theory are
discussed in depth. Specific carburetors representing the major
engine families will be disassembled and studied, including the
newer 2-barrel found on 20 HP Vanguard V-Twin engines. This
exercise is slanted towards understanding and troubleshooting
fuel systems.
(see page 27 for course application)

Factory Service TRAINING

Advanced Electrical & Fuel Delivery Systems

23

Vo-Ed Teachers Training

(Beginner Vo-Ed Instructors) - 4 Days
We begin with an introduction to the Outdoor Power Equipment
industry and progress through parts and replacement engine
identification and repair manual reviews. Engine systems from A
to Z including governors, carburetion, compression, ignition and
lubrication are discussed in detail and in a hands-on fashion
wherever possible.
Youll spend a day on carburetion and electrical systems tracing
circuits using up-to-date training techniques. Dynamic testing and
troubleshooting is provided for reinforcement.
Learn how to make your own see through training aids in
the carburetor cut-away lab so your students will understand
the concept.
Theory is strengthened by workshop labs. A complete engine
tear down and reassembly integrates the how-it-works with the
why-it-works. Youll also benefit from rewind starter servicing and
youll get to try your hand at valve, valve guide and valve seat
repair. Your work will be tested when youre done, so
pay attention!
Keep abreast of all the latest information. While youre here,
sign your facility up as a Registered Vo-Ed Center, receive your
own ID number and get on our mailing list for special offers on
instructional materials.
Enrollment is limited act immediately by completing the
application found on page 27.
You will be notified directly by Briggs & Strattons Customer
Education Department upon acceptance.
(see page 27 for course application)

24

5 Nights Lodging Sunday through Thursday (double occupancy rate)

5 Breakfasts

4 Lunches

1 Evening Banquet

All Course Materials

Transportation Between the Training Facility and Place of Lodging

Framed Certificate to Qualifying Graduates

+ Network with Fellow Technicians or Instructors

+ Plenty of One-On-One Attention (Typical Class Size is 10 - 20 Students)

+ Visit the Briggs & Stratton Power House and Promotional Store

Course Schedule
Advanced Engine Technology

Advanced Electrical
& Fuel Delivery Systems

Vo-Ed Teachers Training

November 6 - 9, 2006

January 8 - 11, 2007

June 4 - 7, 2007

November 13 - 16, 2006

January 15 - 18, 2007

June 11 - 14, 2007

December 4 - 7, 2006

January 29 - February 1, 2007

June 25 - 28, 2007

February 5 - 8, 2007

July 16 - 19, 2007

July 23 - 26, 2007

Factory Service TRAINING

Course Package Amenities

OTE: Briggs & Stratton may cancel scheduled courses if there is insufficient pre-registration. If a cancellation
N
does occur, Briggs & Stratton will promptly notify you of alternate dates available, but will not accept liability for
non-refundable travel tickets.

Course Fees
Course Title
Course Fee

No Lodging
MST Fee*
MSSD or
Required Fee
CE9001 Kit Fee*

Advanced Engine Technology

$795.00

$545.00

$695.00

$350.00

Advanced Electrical & Fuel

$749.00

$499.00

$649.00

$350.00

Vo-Ed Teachers Training

$725.00

$475.00

$625.00

$350.00

*MSTs, MSSD Dealers and Educational Facilities that have purchased the CE9001 OHV Engine Training
Program Kit are eligible for reduced course fees.
MSTs receive a $100.00 discount on each training course.
MSSDs receive one free course every season (excludes lodging or transportation).
Purchasers of CE9001 Training Kit receive one FREE course (excludes lodging or transportation).
FREE course offer is valid for up to 2-years from date of purchase of CE9001 Training Kit.
Include copy of invoice for CE9001 Training Kit with application.
Were so confident youll be pleased at what you experience that we offer a no-questions-asked money
back guarantee!

25

Authorized Field Service Schools (AFSS)

This school is conducted in many major cities by the regional
Briggs & Stratton Integrated Distributor Network. The school is
held periodically throughout the year and is normally attended
by Authorized Service Dealers. The school stresses basic
engine tear down, theory and repair, plus related subjects.
Enrollment is limited and costs vary. Contact your regional
Integrated Distributor for further details, (see back cover) or visit
The Power Portal for times and locations.
To find more information on the internet, go to

www.ThePowerPortal.com
User ID: voed_schools
Password: briggs

Product Update Seminars

This seminar is presented in various cities by the Central Sales
and Service Distributor. Some of these programs are conducted
during the day and others in the evening. They are usually
about three to four hours in length. The subject matter originates
directly from the factory and normally emphasizes new products
and other pertinent service information. These seminars begin
in December and extend into April. In general, enrollment is
not limited and fees may be charged. Contact your regional
Integrated Distributor for further details, (see back cover) or visit
The Power Portal for times and locations, (see above).

Customer Education & the EETC

Briggs & Stratton is a strong supporter of the Equipment and
Engine Training Council (EETC). The EETC is deeply involved
in two distinct areas, technician certification and development of
educational facilities to teach equipment and engine curriculum.
Attending a Briggs & Stratton course will help the technicians
with fundamental knowledge that can be applied to EETC
certification tests. Additional information can also to be supplied
to Vo-Ed Instructors for developing an accredited EETC
educational facility. For additional EETC information log on to
www.eetc.org.

26

(Please Print)

Payment can be made either by credit card or check, payable to Briggs & Stratton. Photocopy application and mail or
fax (414-259-5214) with credit card information or send application and check to:
Briggs & Stratton Corporation
Attn: Customer Education Department Training Schools
P.O. Box 702
Milwaukee, WI 53201-0702
Briggs & Stratton ID# B-(if applicable)

Date of Application

Company/School Name (District)

Company/School Address

Business Telephone Number

City

Fax Number

State

E-Mail

Yrs of Industry/Teaching Experience

Applicant Name

Age

Home Address

City

State

Zip

Zip
(Min 1 Yr)

Male/Female

Telephone Number

ADvANCED ENgINE TECHNologY

November 6 - 9, 2006
November 13 - 16, 2006
December 4 - 7, 2006

ADvANCED ElECTrICAl & FuEl DElIvErY SYSTEMS

January 8 - 11, 2007
January 15 - 18, 2007
January 29 - February 1, 2007
February 5 - 8, 2007
July 23 - 26, 2007

vo-ED TEACHErS SCHool

June 4 - 7, 2007
June 11 - 14, 2007
June 25 - 28, 2007
July 16 - 19, 2007

*1st Choice

1st Choice

1st Choice

2nd Choice

2nd Choice

2nd Choice

*If both choices are filled, we will return check and application
FACTorY TrAININg CourSES INCluDE
5 Night Lodging - Sunday thru Thursday (Double Occupancy)
5 Breakfasts 4 Lunches 1 Evening Banquet
All Course Materials Transportation between School/Lodging
Framed Certificate to Qualifying Graduates

CHECK APProPrIATE BoXES

QSMOKING
QNON-SMOKING
QPRIVATE ROOM (You are responsible for the difference)
QNO LODGING REQUIRED

TRAINING COURSES APPLICAtion

2006-2007 ADVANCED FACTORY TRAINING COURSES APPLICATION

Please make travel arrangements to arrive on Sunday and to depart Friday.

For credit card payment, mail or fax application.
(Check one) QVisa QMasterCard QAmerican Express

QDiscover

Print name (as it appears on card)

Account Number:

Signature:

Exp. Date:

**Q MSSD School Fee (Check if applicable)

**Q MST (Check if applicable)

Q CE9001 OHV Training Kit School Fee

NOTE: PLEASE USE (1) APPLICATION FORM PER PERSON ATTENDING CANADA ONLY: Please make school fee payable in U.S. funds.
CANCELLATION MUST BE RECEIVED IN WRITING AT BRIGGS & STRATTON 10 DAYS PRIOR TO THE WEEK SCHEDULED TO OBTAIN A REFUND.

27

Basic Training Starter Kit Application

Briggs &Stratton Corporation
Attn: Education Dept.
VO-Ed Programs
P.O. Box 702
Milwaukee,Wisconsin 53201-0702
Fax: 414-259-5214

-Please Print or TypeMUST INCLUDE A COURSE OUTLINE

& DONATION AGREEMENT FORM

This is to certify that we conduct small gasoline engine classes as described below:
Specific school name________________________________________ Grade level of course_______________________
Street address____________________________________ Mailing address_ ___________________________________

City________________________________ County_______________________ State_ _______ Zip __________________

E-mail___________________________________________ Phone____________________________________________

Number of students in largest class____________________ Number of classes_____________________

Total hrs. of classroom participation_ __________________ Number of weeks of small engine class__________________

Times class is repeated each semester_ _______________ Is the material also used in adult classes?_ ______________

Number of adult students in each class_________________ Number of adult classes______________________________

This material will be used in the above listed school for educational purposes only and shall be considered a gift to the
school and not to an individual instructor.
We will welcome any visitation by Briggs &Stratton Corporation personnel wishing to review our utilization of this material.

28

INSTRUCTOR (SIGNATURE)

PRINCIPAL (SIGNATURE)

INSTRUCTOR (PLEASE PRINT)

DATE

THIS DONATION AGREEMENT (this Agreement) dated as of

200

by and between Briggs &Stratton Corporation, a Wisconsin corporation having its principal business offices at
12301 West Wirth Street, Wauwatosa, WI 53222 (Donor),
and

(organization name)

a(n)
organization having its principal business office at,

(Donee).

In consideration of the mutual covenants and agreements contained in this Agreement, the parties hereby
agree as follows:

1. Donor hereby donates, gives and delivers to Donee, and Donee hereby accepts, the property
described on the attached acknowledgement form, subject to the terms and conditions set forth in this
Agreement.

APPLICATION & FORMS

Engine Donation Form

2. The donated property is given to Donee as is and without any warranty. Donor makes no
representation of warranty, express or implied, with respect to the merchantability, condition, quality or fitness
for any particular purpose of the donated property.

3. Donee on behalf of itself, its officers, directors, employees and agents by accepting the donated
property expressly waives any and all rights, claims, causes of action, judgements, settlements or costs for
actual, consequential or incidental damages due to personal injury, property damage or otherwise relative to
the use or ownership of the donated property.

4. Donee hereby agrees to indemnify and hold Donor, its officers, directors, employees and agents
harmless from and against any and all claims, causes of action, judgements, settlements, or costs of any
nature which arise out of or in connection with the donated property in any manner whatsoever.

5. This agreement shall be governed by the laws of the State of Wisconsin.

6. This agreement contains the entire agreement of the parties with respect to its subject matter. Any
prior representations, understandings or course of dealings shall be of no force or effect.
In witness whereof, each party has caused this Agreement to be signed by its duly authorized representative.

BRIGGS &STRATTON

NAME OF DONEE

By______________________________________

By_ _______________________________________

Name_ __________________________________

Name______________________________________

Title_____________________________________

Title _______________________________________

We receive many requests for donation engines. These engines are subject to program allocations and
might not always be available for immediate shipment. If this occurs, we will notify you accordingly.
Your request will be handled in the order that it was received as additional engines become available.

29

On-Line Sales Catalog

Exclusively For Small Engine Instructors

Log on to:
www.ThePowerPortal.com
User ID: voed_schools
Password: briggs

Content

Free Engine Kit

Illustrated Parts Lists

Factory Instructor Schools

Electronic Parts Look-Up

Distributor School Schedules

Technical Publications

Tear down Scripts

Factory Close Outs & Specials

Instructor Support Materials

Mailing List

Tool Catalog

and More...

Check this site often for new offerings

and special factory offers!

30

Nobody Provides More Training Resources On Small Engines

19300 Basic Tool Kit

KIT INCLUDES: 19063 Valve Spring Compressor

19069 Flywheel Puller
19070 Piston Ring Compressor (5 HP & below)
19165 Flywheel Puller, 19203 Flywheel Puller
19200 Tachometer, 19266 Suction Cup 3/4" (19.1 mm)
19268 Suction Cup 1-1/4" (31.8 mm)
19340 Piston Ring Expander, 19442 Torqux Starbits
19433 Strapwrench, 19480 Tang Bender
19244 Starter Clutch Wrench, 19256 Brake Adjustment Gauge
19258 Valve Lapper (includes 19266 & 19268)
19061 Screwdriver Carb. Jet, 19062 Screwdriver Carb. Jet
19368 Tester Ignition, 93963 Lubricant Valve
94150 Valve Lapping Compound
MS8746 Service Tools Catalog, see below. Price $157.45

19368 Tester - Ignition

Designed to simulate true engine ignition resistance and system
capabilities under safe test conditions.
Price $14.90

19389 Digital Tach & Hourmeter

POWER PORTAL & TOOLS

Tools

Meter displays RPM while engine is running.

When engine is stopped, meter displays elapsed time.
Price $47.60

19468 DC Amp Shunt

Used to measure amperage in a 12 volt system. Color coded
receptacles hold digital multimeter leads securely while testing.
This tool works with any digital multimeter with a millivolt scale.
Eliminates blowing the fuse in multi-meters, due to high current
loads such as charging and starting. Price $32.35

19545 Leakdown Tester

Used to test the sealing capabilities of the compression
components of all engines. Comes with crankshaft clamp.
Price $178.45

MS8746 Service Tools Catalog

See www.ThePowerPortal.com for information on all
Briggs & Stratton Tools!

User ID: voed_schools

Password: briggs
See pages 32 and 33 for ordering and pricing.

31

ORDER FORM & PRICE LIST

Please Photo Copy Forms & Print Clearly All Prices Include Shipping
School Name:
Bill To Address:
City:

State:

Zip:

State:

Zip:

Ship To (if different than bill to)

Ship To:
City:
Attention (please print):

Telephone No:

School Purchase Order:

E-mail:

Credit Card No:

MC:

VISA:

AMEX:

Discover:

Expiration Date:
Mail orders to: Briggs & Stratton Corporation

Attention: Customer Education

P.O. Box 702

Milwaukee, WI 53201-702
Part Number

Fax orders to: 414.259.5214

Call 800.934.7730 for General Information

Description

Price*

Training Kits
CE9001

OHV Engine Program (pg. 6)

CE9015

Alternator (pg. 14)

$7,172.49
$115.95

CE9018

Ignition Armature (pg. 14)

$22.95

CE9024

Single Circuit Carburetor (pg. 14)

$24.69

CE9025

Dual Circuit Carburetor (pg. 14)

$49.95

CE9028

OHV Engine Upgrade Module (pg. 8)

CE9039

L-Head Engine (pg. 8)

CE9040

OHV Engine (pg. 10)

CE9041

OHV Engine Replacement (pg. 10)

$1569.95

CE9042

Portable Generator Training (pg. 12)

$2,354.86

CE9047

L-Head Engine Replacement (pg. 12)

$1,076.50

$2,540.65
$926.89
$1,099.95

LITERATURE
274041

Small Engine Care & Repair (pg. 15)

$17.95

CE8006

Tips & Tools

$4.95

CE8020

Small Engines Textbook (pg. 15)

$67.95

CE8021

Small Engines Workbook (pg. 15)

$22.85

CE8022

Small Engines Workbook Answer Key (pg. 15)

$18.25

CE8034

Major Engine Failure Analysis (pg. 15)

$12.05

CE3001

Maximizing Engine Life By Preventive

Maintenance - Video (pg. 18)

$23.95

CE3013

Theories of Operation Vol. 1 - Video (pg. 16)

$105.10

VIDEOS & DVDS

32

Quantity

Extended Price

Part Number

Description

Price*

CE3019

Dynamics of Engine Failure - Video (pg. 17)

$40.85

CE3029

Theories of Operation Vol. 2 - Video (pg. 17)

$105.10

CE3037

Vanguard 3-Cylinder Water-Cooled

Information - Video (pg. 19)

$21.75

CE3064

Quick Check Diagnostics - Video (pg. 18)

$23.35

CE3069

The Briggs & Stratton Story - DVD (pg. 19)

$38.10

CE3070

4-Cycle Theory - Video (pg. 16)

$22.40

CE3091

Archived Service Information - Video (pg. 19)

$38.10

CE3097

Water Pump & Pressure Washer Theory &

Troubleshooting - DVD (pg. 17)

$29.95

Quantity

Extended Price

Computer Based Training Modules (CBT, pg. 20)

CE3060

Product Knowledge

$32.65

CE3086

10-12 kW Home Generator Systems

$59.95

CE3092

7 kW Home Generator Systems

$59.95

PowerPoint CDs (pg. 21)

CE3017

Basic Engine Systems

$28.10

CE3056

Fuel Delivery Systems

$28.10

CE3093

L-Head Engine Instructors Reference

$49.95

CE3094

OHV Engine Instructors Reference

$49.95

CE3095

Portable Generator Instructors Reference

$49.95

The following items can be found at our website exclusively for Vo-Ed Instructors.
www.ThePowerPortal.com User ID: voed_schools Password: briggs
Part Number

Description

Price*

Quantity

Extended Price

Power Portal Specials (Fill in Part Number, Description, Quantity and Price)

Tools (Fill in Part Number, Description, Quantity and Price)

Repair Parts (Fill in Part Number, Description, Quantity and Price)

*Total

Please attach a copy of your school tax-exempt form and a copy of your purchase order.
Briggs & Stratton Corporation will ship items pre-paid.
Instructor (Signature)
Instructor (Please Print)
Principal (Signature)
Date
*All Prices Include Shipping *Prices Subject to Change Without Notice!

33

INTEGRATED DISTRIBUTORS NETWORK EDUCATIONAL DIRECTORS

4
1

6
5

1
3
2
6
1. MIDWEST ENGINE WAREHOUSE
5. PREFERRED POWER

3. SEDCO, Inc.

2. MAGNETO POWER

6. CENTRAL POWER SYSTEMS

4. ATLANTIC POWER

7. POWER SOURCE CANADA

1.
1.
1.
1.

700 Enterprise Street, Aurora, IL 60504

7101 West Doe Avenue, Visalia, CA 93291
9630 Woodend Road, Edwardsville, KS 66111
362 Parkway Blvd., West Valley City, UT 84120

Ph: (630) 862-3100 Fx: (630) 862-3315

Ph: (602) 272-3936 Fx: (602) 278-0324
Ph: (913) 543-7600 Fx: (913) 543-7610
Ph: (630) 862-3100 Fx: (630) 862-3315

Tom Ziemann
John Reid
Brian Kozumplik
Brian Kozumplik

[email protected]
[email protected]
[email protected]
[email protected]

2.
2.
2.
2.

1000 W Donges Bay Rd., Ste. 100, Mequon, WI 53092

800 McKinley St., Anoka, MN 55303
13009 SE Jennifer St. #104, Clackamas, OR 97015
11011 Regency Crest Dr. Ste. 100, Dallas, TX 75355

Ph: (262) 445-2800 Fx: (414) 445-1353

Ph: (763) 323-7477 Fx: (800) 215-8933
Ph: (262) 445-2800 Fx: (414) 445-1353
Ph: (469) 341-1691 Fx: (469) 341-1692

Matt Anderson
Matt Anderson
Greg Muse
Robert Ortolani

3. 225 Henry D. Robinson Blvd., Pendergrass, GA 30567

Ph: (706) 693-1300 Fx: (706) 693-1333

Wayne Crosby

4. 20 Empire State Blvd., Castleton, NY 12033

Ph: (518) 479-6911 Fx: (877) 417-5961

Art Falk

5. 6509A Northpark Blvd., Charlotte, NC 28216

Ph: (704) 598-1010 Fx: (704) 598-4877

Steve Krcelic

6. 2555 International Street, Columbus, OH 43228

6. 4751 Oak Fair Boulevard, Tampa, FL 33610

Ph: (614) 876-3533 Fx: (614) 876-1437

Ph: (813) 626-5447 Fx: (813) 621-9840

Pat Earnest
Pat Earnest

[email protected]
[email protected]

7. 32815 Bristol Circle, Oakville, ON, Canada L6G 6X5

7. 300-1628 Derwent Way, Delta, BC, Canada V3M 6R9

Ph: (905) 829-0006 Fx: (905) 829-8611

Ph: (604) 520-1294 Fx: (604) 520-1361

Mike Gulley
Mike Gulley

[email protected]
[email protected]

[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]

2006 BRIGGS&STRATTON CUSTOMER EDUCATION

For more educational information contact us at 1-800-934-7730
or e-mail us at [email protected] Printed in the U.S.A.
www.BRIGGSandSTRATTON.com www.ThePowerPortal.com

24847 89342

CE8000 -11/06