3512B Generator Set Oil Field Land Rig PTF00001-UP(SEBP3451 - 8...
1 de 2
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retu...
Welcome: cr080cptx12
Product: GENERATOR SET
Model: 3512B GENERATOR SET PTF
Configuration: 3512B Generator Set Oil Field Land Rig PTF00001-UP
Specifications
3500B and 3500B High Displacement Engines for Caterpillar Built Generator Sets
Media Number -RENR4952-10
Publication Date -01/04/2013
Date Updated -17/04/2013
i05770011
Alternator Mounting
SMCS - 1405
Part Number S/N - BMB1-UP
Part Number S/N - FDN1-UP
Part Number S/N - CNB1-UP
Part Number S/N - PTM1-UP
Part Number S/N - CPA1-UP
Part Number S/N - CMC1-UP
Part Number S/N - GAR1-UP
Part Number S/N - BPJ1-UP
Part Number S/N - GZS1-UP
Part Number S/N - PTF1-UP
Part Number S/N - PPS1-UP
Part Number S/N - GZY1-UP
Part Number S/N - BRK1-UP
Part Number S/N - GZT1-UP
Part Number S/N - BGX1-UP
Part Number S/N - BLF1-UP
Part Number S/N - LEK1-UP
Part Number S/N - PTN1-UP
16/09/2016 20:51
3512B Generator Set Oil Field Land Rig PTF00001-UP(SEBP3451 - 8...
Illustration 1
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retu...
g03660699
Table 1
Specification for 210-1228 Alternator Mounting Gp, and 335-4161 Alternator Mounting Gp
Item
Qty
Part
Specification Description
Tighten the pulley retaining nut to 110 10 Nm (81 7 lb ft).
Maximum misalignment between pulley assembly (3) and pulley (1) is 0.4 degrees.
Adjust the belt tension according to the 197-9087 Tension Chart.
235-2484 Lip Type Seal
Lubricate the sealing lip lightly with the lubricant that is being sealed.
197-9087 Belt Tension Chart
Table 2
Specification for 197-9087 Belt Tension Chart
Gauge Reading
Size of
Belt
8 - RIB
POLY RIB
Width of Belt
27.82 mm
(1.095 inch)
Gauge (Force)
Belt Tension
(Force)
Initial
Belt Tension
(Force)
Used
(1)
(2)(3)
800 22 N
(180 5 lb)
489 44 N
(110 10 lb)
Basic Gauge
Number
BT-33-109
Belt Tension
(Frequency)
Initial(1)
Belt Tension
(Frequency)
Used(2)(3)
98 10 HZ
76 8 HZ
Gauge
(Frequency)
Gauge
Number
Clavis Type 14
Do not use the belt tension chart for belts with tensioners that are spring loaded.
Measure the tension of the belt that is farthest from the engine.
(1)
Belt tension lnitial is for a new belt.
(2)
Belt tension Used is for a belt that has operated for 30 minutes or more of operation at the rated speed.
(3)
If a belt falls below the Used belt tension, the belt should be tightened again to the high side of the Used belt tension.
Copyright 1993 - 2016 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
2 de 2
Fri Sep 16 2016 20:50:44 GMT-0500
cr080cptx12
16/09/2016 20:51
