MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish

09/02/2008

Material Safety Data Sheet

Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

PRODUCT NAME: 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish

MANUFACTURER: 3M
DIVISION: 3M ESPE Dental Products
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 09/02/2008
Supercedes Date: Initial Issue
Document Group: 25-5461-6

ID Number(s):
70-2010-5651-5
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for
each of these components is included. Please do not separate the component MSDSs from this cover page. The document
numbers of the MSDSs for components of this product are:
25-5359-2, 25-5420-2

No revision information is available.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________________
Page 1 of 2

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish

09/02/2008

_________________________________________________________________________________________________________
Page 2 of 2

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

10/10/2008

Material Safety Data Sheet

Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B
MANUFACTURER: 3M
DIVISION: 3M ESPE Dental Products
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/10/2008
Supercedes Date: 09/02/2008
Document Group: 25-5359-2
Product Use:
Intended Use:
Limitations on Use:
Specific Use:

Dental Product
For use only by dental professionals
Dental Varnish

SECTION 2: INGREDIENTS
Ingredient

C.A.S. No.

% by Wt

COPOLYMER OF ACRYLIC AND ITACONIC ACIDS

WATER
2-HYDROXYETHYL METHACRYLATE (HEMA)
CALCIUM GLYCEROPHOSPHATE

25948-33-8
7732-18-5
868-77-9
27214-00-2

40 - 50
30 - 40
15 - 25
1 - 10

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW
Odor, Color, Grade: Yellow Liquid, Slight Acrylate Odor.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:

May cause allergic skin reaction.

3.2 POTENTIAL HEALTH EFFECTS

Eye Contact:
_________________________________________________________________________________________________
Page 1 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

10/10/2008

Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.

Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.

Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain.

Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.

SECTION 4: FIRST AID MEASURES

4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air.

If signs/symptoms develop, get medical attention.

If Swallowed:
Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get medical attention.

SECTION 5: FIRE FIGHTING MEASURES

5.1 FLAMMABLE PROPERTIES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL

No Data Available
>=200 F [Test Method: Closed Cup]
Not Applicable
Not Applicable

5.2 EXTINGUISHING MEDIA

Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).

5.3 PROTECTION OF FIRE FIGHTERS

_________________________________________________________________________________________________
Page 2 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

Special Fire Fighting Procedures:

(SCBA).

10/10/2008

Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus

Unusual Fire and Explosion Hazards:

Not applicable.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.

SECTION 6: ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. Contain spill. For larger spills, cover drains and build dikes to
prevent entry into sewer systems or bodies of water. Working from around the edges of the spill inward, cover with bentonite,
vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much
of the spilled material as possible. Place in a closed container approved for transportation by appropriate authorities. Dispose of
collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.

SECTION 7: HANDLING AND STORAGE

7.1 HANDLING
Avoid eye contact. Avoid skin contact. Do not ingest. Wash hands after handling and before eating. A no-touch technique is
recommended. If skin contact occurs, wash skin with soap and water. Acrylates may penetrate commonly-used gloves. If product
contacts glove, remove and discard glove, wash hands immediately with soap and water and then re-glove.

7.2 STORAGE
Store out of direct sunlight. Keep container in well-ventilated area.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 ENGINEERING CONTROLS
Use in a well-ventilated area.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)

8.2.1 Eye/Face Protection
Avoid eye contact.
The following eye protection(s) are recommended: Safety Glasses with side shields.
8.2.2 Skin Protection
Avoid skin contact.
See Section 7.1 for more information about skin protection.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.

_________________________________________________________________________________________________
Page 3 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

10/10/2008

8.2.4 Prevention of Swallowing

Do not ingest. Wash hands after handling and before eating.

8.3 EXPOSURE GUIDELINES

None Established

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density

Yellow Liquid, Slight Acrylate Odor.

Liquid
No Data Available
>=200 F [Test Method: Closed Cup]
Not Applicable
Not Applicable
No Data Available
1.14 g/ml
No Data Available

Vapor Pressure

No Data Available

Specific Gravity
pH
Melting point

1.14 [Ref Std: WATER=1]

3.6
Not Applicable

Solubility in Water
Viscosity

Complete
800 - 1400 centistoke

SECTION 10: STABILITY AND REACTIVITY

Stability: Stable.
Materials and Conditions to Avoid: Heat

Hazardous Polymerization: Hazardous polymerization will not occur.

Hazardous Decomposition or By-Products

Substance

Condition

Carbon monoxide
Carbon dioxide

During Combustion
During Combustion

SECTION 11: TOXICOLOGICAL INFORMATION

Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.

_________________________________________________________________________________________________
Page 4 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

10/10/2008

SECTION 12: ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION
Not determined.

CHEMICAL FATE INFORMATION

Not determined.

SECTION 13: DISPOSAL CONSIDERATIONS

Waste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material. As a disposal
alternative, dispose of waste product in a facility permitted to accept chemical waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.

SECTION 14:TRANSPORT INFORMATION

LE-F100-0602-9

Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.

SECTION 15: REGULATORY INFORMATION

US FEDERAL REGULATIONS
Contact 3M for more information.

311/312 Hazard Categories:

Fire Hazard - No Pressure Hazard - No

Reactivity Hazard - No

Immediate Hazard - Yes

Delayed Hazard - No

STATE REGULATIONS
Contact 3M for more information.

CHEMICAL INVENTORIES
This material contains one or more substances not listed on the TSCA Inventory. Commercial use of this material is regulated by the
FDA.
_________________________________________________________________________________________________
Page 5 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) VANISH XT EXTENDED CONTACT VARNISH PART B

10/10/2008

Contact 3M for more information.

INTERNATIONAL REGULATIONS
Contact 3M for more information.

This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: OTHER INFORMATION

NFPA Hazard Classification
Health: 2 Flammability: 1

Reactivity: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.

Reason for Reissue: Inactivated via automated process per division request 2004-2-16. Contact division with questions.
Revision Changes:
Section 1: Initial issue message was modified.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.

3M MSDSs are available at www.3M.com

_________________________________________________________________________________________________
Page 6 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

Material Safety Data Sheet

Copyright, 2008, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A
MANUFACTURER: 3M
DIVISION: 3M ESPE Dental Products
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 10/10/2008
Supercedes Date: 09/02/2008
Document Group: 25-5420-2
Product Use:
Intended Use:
Limitations on Use:
Specific Use:

Dental Product
For use only by dental professionals.
Dental varnish.

SECTION 2: INGREDIENTS
Ingredient

C.A.S. No.

% by Wt

SILANE TREATED GLASS

2-HYDROXYETHYL METHACRYLATE (HEMA)
WATER
SILANE TREATED SILICA
BISPHENOL A DIGLYCIDYL ETHER DIMETHACRYLATE (BISGMA)

NONE
868-77-9
7732-18-5
68909-20-6
1565-94-2

70 - 80
10 - 20
1 - 10
<2
<2

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW
Specific Physical Form: Paste
Odor, Color, Grade: Off-white to Yellow Paste, No Odor.
General Physical Form: Solid
Immediate health, physical, and environmental hazards:

May cause allergic skin reaction.

3.2 POTENTIAL HEALTH EFFECTS

_________________________________________________________________________________________________
Page 1 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.

Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.

Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose and
throat pain.

Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.

SECTION 4: FIRST AID MEASURES

4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air.

If signs/symptoms develop, get medical attention.

If Swallowed:
Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
give anything by mouth to an unconscious person. Get medical attention.

SECTION 5: FIRE FIGHTING MEASURES

5.1 FLAMMABLE PROPERTIES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL

Not Applicable
Not Applicable
Not Applicable
Not Applicable

5.2 EXTINGUISHING MEDIA

Ordinary combustible material. Use fire extinguishers with class A extinguishing agents (e.g., water, foam).

_________________________________________________________________________________________________
Page 2 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

5.3 PROTECTION OF FIRE FIGHTERS

Special Fire Fighting Procedures:
(SCBA).

Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus

Unusual Fire and Explosion Hazards:

Not applicable.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.

SECTION 6: ACCIDENTAL RELEASE MEASURES

Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Collect as much of the spilled material as possible. Clean up residue. Place in a closed container
approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.

SECTION 7: HANDLING AND STORAGE

7.1 HANDLING
Avoid skin contact. Do not ingest. Wash hands after handling and before eating. A no-touch technique is recommended. If skin
contact occurs, wash skin with soap and water. Acrylates may penetrate commonly-used gloves. If product contacts glove, remove and
discard glove, wash hands immediately with soap and water and then re-glove. Avoid eye contact with dust or airborne particles.

7.2 STORAGE
Store away from heat. Store out of direct sunlight.

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 ENGINEERING CONTROLS
Use in a well-ventilated area.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)

8.2.1 Eye/Face Protection
Avoid eye contact.
The following eye protection(s) are recommended: Safety Glasses with side shields.
8.2.2 Skin Protection
Avoid skin contact.
See Section 7.1 for more information about skin protection.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.
8.2.4 Prevention of Swallowing
_________________________________________________________________________________________________
Page 3 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

Do not ingest. Wash hands after handling and before eating.

8.3 EXPOSURE GUIDELINES

None Established

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

Specific Physical Form:
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density

Paste
Off-white to Yellow Paste, No Odor.
Solid
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
1.9 g/cm3
Not Applicable

Vapor Pressure

Not Applicable

Specific Gravity
pH
Melting point

1.9 [Ref Std: WATER=1]

Not Applicable
No Data Available

Solubility in Water
Evaporation rate
Volatile Organic Compounds
Percent volatile
VOC Less H2O & Exempt Solvents
Viscosity

Nil
Not Applicable
Not Applicable
Nil
Not Applicable
>=300000 centistoke [Test Method: Brookfield]

SECTION 10: STABILITY AND REACTIVITY

Stability: Stable.
Materials and Conditions to Avoid: Heat; Water

Hazardous Polymerization: Hazardous polymerization will not occur.

Hazardous Decomposition or By-Products

Substance

Condition

Carbon monoxide
Carbon dioxide

During Combustion
During Combustion

SECTION 11: TOXICOLOGICAL INFORMATION

_________________________________________________________________________________________________
Page 4 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.

SECTION 12: ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION
Not determined.

CHEMICAL FATE INFORMATION

Not determined.

SECTION 13: DISPOSAL CONSIDERATIONS

Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill.
As a disposal alternative, incinerate uncured product in an industrial or commercial incinerator.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.

SECTION 14:TRANSPORT INFORMATION

LE-F100-0603-0

Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.

SECTION 15: REGULATORY INFORMATION

US FEDERAL REGULATIONS
Contact 3M for more information.

311/312 Hazard Categories:

Fire Hazard - No Pressure Hazard - No

Reactivity Hazard - No

Immediate Hazard - Yes

Delayed Hazard - No

STATE REGULATIONS
Contact 3M for more information.

_________________________________________________________________________________________________
Page 5 of 6

MATERIAL SAFETY DATA SHEET 3M(TM) ESPE(TM) Vanish(TM) XT Extended Contact Varnish Part A

10/10/2008

CHEMICAL INVENTORIES
This material contains one or more substances not listed on the TSCA Inventory. Commercial use of this material is regulated by the
FDA.
Contact 3M for more information.

INTERNATIONAL REGULATIONS
Contact 3M for more information.

This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.

SECTION 16: OTHER INFORMATION

NFPA Hazard Classification
Health: 2 Flammability: 1

Reactivity: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.

Revision Changes:
Section 1: Initial issue message was modified.
Section 2: Ingredient table was modified.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.

3M MSDSs are available at www.3M.com

_________________________________________________________________________________________________
Page 6 of 6