Scribd
Upload
217 views4 pages

For Battened Columns For Strength Cal 10% Increase in The KL/R

This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

Uploaded by

vineetuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
217 views4 pages

For Battened Columns For Strength Cal 10% Increase in The KL/R

This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

Uploaded by

vineetuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

y

300 mm
single section details

A
bf
tf
Ixx
Iyy

4564 mm2
90 mm
13.6 mm
63626000 mm4
3108000 mm4

Cyy
rxx
ryy

gross area
flange width
flange thk

23.6 mm
118.1 mm
26.1 mm

length of the column

4000 mm

NET section details


A
IXX
IYY
Rxx
Ryy
Rmin
kl/rmin

9128 mm2
127252000 mm4
152053691 mm4
118.07134 mm
129.065648 mm

OK

118.07134 mm
33.8778233

for battened columns for strength cal 10% increase in the kl/r
i.e for kl/r 33.8778233
section capacity

ac
1296.176 KN

142 N/mm2

BATTEN DESIGN
1

Ryy

>

Rxx

OK

SLENDERNESS RATIO
KL/R
33.87782
2

C/C SPACING OF BATTEN

618.9478 mm

NO OF DIVISIONS REQUIRED
EXACT C/C SPACING

571.429 mm

VT

32.4044 KN

TRANSV SHEAR ANY PT ON COLUMN

VB

33.06571 KN

M
3

SHEAR IN BATTEN

4.6292 KNm

MOMENT IN BATTEN

depth of batten plate

252.8

say

275 mm

depth of batten plate

189.6

say

200 mm

say

6 mm

THK

6 mm

CHECK FOR FORCES


M

4.6292 KNm

Mr
VB
VBr

6 KNm
33.0657143 KN
120 KN

WELDING

MOMENT IN BATTEN
>

OK

SHEAR IN BATTEN
>

VB

OK

6 mm thk

LENGTH REQUIRED FOR SHEAR

36.08723 mm

<

END BATTEN PLATE


INTERMEDIATE BATTEN PLATE

BATTEN PLATE THICKNESS

200 mm thk

HENCE

OK

You might also like