Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Rosemount 2110 Compact Vibrating
Fork Liquid Level Switch
Function virtually unaffected by flow,
turbulence, bubbles, foam, vibration, solids
content, coating, properties of the liquid, and
product variations
No need for calibration and requires minimum
installation procedures
Polarity insensitive and short
circuit protection
Industry standard plug/socket connection
No moving parts or crevices means virtually
no maintenance
Electronic, self-checking, and condition
monitoring - Heartbeat LED gives status and
health information
Magnetic test point makes functional test easy
Compact design, small in size and weight
Fast Drip Fork Design gives quicker
response time especially with viscous liquids
Hygienic connections
Contents
Reliable Performance...In Challenging Applications . . . . . . . . . . . . . . . . . . page Level-388
Rosemount 2110 Compact Vibrating Fork Liquid Level Switch. . . . . . . . . . page Level-390
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Level-391
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Level-392
Dimensional Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page Level-393
www.rosemount.com
2110
Level
Product Data Sheet
Rosemount 2110
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Reliable Performance...In Challenging Applications
MEASUREMENT PRINCIPLE
The Rosemount 2110 is designed using the principle of a
tuning fork. A piezo-electric crystal oscillates the forks at
their natural frequency. Changes to this frequency are
continuously monitored. The frequency of the vibrating fork
sensor changes depending on the medium in which it is
immersed. The denser the liquid, the lower the frequency.
When used as a low level alarm, the liquid in the tank or
pipe drains down past the fork, causing a change of natural
frequency that is detected by the electronics and switches
the output state.
When the 2110 is used as a high level alarm, the liquid
rises in the tank or pipe, making contact with the fork which
then causes the output state to switch.
Threaded Process
Connection
Tri-Clamp Process
Connection
KEY FEATURES AND BENEFITS
Virtually unaffected by turbulence, foam, vibration, solids
content, coating, or liquid properties
Stainless steel housing and plug/socket connection for the
fast fit, high volume user
Compact and lightweight design for side or top mounting
The industry standard DIN 43650 plug/socket is used for a
fast connection. The polarity insensitivity and short circuit
protection make electrical hook-up safe and easy
Level
The 2110 is designed for operation in temperatures from
40 to 302 F (40 to 150 C)
The heartbeat LED gives status and health information on
the 2110
2110
Compact And Lightweight
Fast Drip fork design gives quicker response time,
especially with viscous liquids
Rapid wet-to-dry time for highly responsive switching
Fork shape is optimized for hand polishing to meet
hygienic requirements
No moving parts or crevices for virtually no maintenance
Fast Drip Forks
Level - 388
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Fit and Forget
Once installed, the 2110 is ready to go.
It needs no calibration and requires minimum installation
The heartbeat LED gives an instant visual indication that
the unit is operational
Functional testing of the instrument and system is easy with
a magnetic test point
You can install, and forget it
Superior Performance
Functionality is virtually unaffected by flow, turbulence,
bubbles, foam, or vibration
The Fast Drip design allows the liquid to be quickly drawn
away from the fork tip, making the 2110 quicker and more
responsive in high density or viscous liquid applications
With a user-selectable time delay feature, the risk of false
switching is minimized in turbulent or splashing applications
Overfill Protection
APPLICATIONS
Overfill protection
High and low level alarms
Leak detection
Run dry or pump protection
Pump control or limit detection
Hygienic applications
High And Low Level Alarm
2110
Level
Leak Detection
Pump Protection
Level - 389
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Rosemount 2110
Compact Vibrating Fork Liquid Level Switch
Rosemount 2110 capabilities include:
Rugged stainless steel body and fork, the ideal choice for OEM applications
Compact design, small and lightweight, perfect for small tank or pipe installations
Short fork or semi-extended lengths
Direct load switching or PNP/PLC electronics
Safe area only
Additional Information
2110 Level Switch
Specifications:
Dimensions:
Certifications:
page Level-391
page Level-393
page Level-392
TABLE 1. 2110 Ordering Information
The Standard offering represents the most common options. The starred options () should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Level
2110
Model
Product Description
2110
Compact Vibrating Fork Liquid Level Switch
Electronic Type
Standard
0
Direct load switching with plug connection (2 wire) 21 to 264 Vac 50/60Hz, 21 to 264 Vdc
1
PNP/PLC low voltage switching with plug connection 18 to 60 Vdc
Process Connection Size / Type
Standard
3/4-in. BSPT (R) thread
0A
1A
1-in. BSPT (R) thread
3/4-in. NPT thread
0D
2R
2-in. (51 mm) Tri-clamp
1B
1-in. BSPP (G) thread
1L
1-in. BSPP (G) Semi-extended 4.6 in. (116 mm)
Product Certificates
Standard
NA
No hazardous locations certifications (safe area use only)
U1
DIBt/WHG Overfill protection
OPTIONS
Calibration Data Certificate
Standard
Q4
Certificate of functional test
Tag Plate
Standard
ST
Tag plate SST engraved plate (maximum 16 digits)
WT
Tag plate laminated paper (maximum 40 digits)
Typical Model Number: 2110 0 2R NA
Standard
Standard
Standard
Standard
Standard
TABLE 2. Spare Parts and Accessories
The Standard offering represents the most common options. The starred options () should be selected for best delivery.
The Expanded offering is subject to additional delivery lead time.
Spares and Accessories
Standard
02100-1000-0001 Seal for 1-in. BSPP (G1A). Material: Non-asbestos BS7531 grade X carbon fiber with rubber binder
02100-1010-0001 Hygienic adaptor boss for 1-in. BSPP model. Material: 316 SST fitting. Fluorocarbon (FPM/FKM) O-ring
02100-1020-0001 Hygienic mounting kit for 2-in. (51 mm) Tri-clamp model. Includes vessel fitting, clamp ring, and seal.
Material: 316 SST and NBR Nitrile
02100-1030-0001 Telescopic test magnet
Level - 390
Standard
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Specifications
PHYSICAL
FUNCTIONAL
Product
Rosemount 2110 Compact Liquid Level Switch
Maximum Operating Pressure
(The final rating depends on the process connection)
Measuring principle
Vibrating Fork
Threaded Connection
See Figure 1
Hygienic Connection
Applications
Most liquids including coating liquids, aerated liquids,
and slurries
435 psig (30 barg)
Figure 1. Process Pressure
Process Pressure psig (barg)
Mechanical
Process Material
316L Stainless Steel (1.4404)
For Tri-Clamp connection, hand polished to better
than 0.8 m. Gasket material for 1 in. BSPP (G1) is
Non-asbestos BS7531 Grade X carbon fiber with
rubber binder.
Dimensional Drawings
See Dimensional Drawing on page 393
Ingress of Protection Rating
IP66/67 to EN60529
PERFORMANCE
Hysteresis (water)
0.039-in. ( 1 mm) nominal.
32 (0)
-3.62 (-0.25)
302
(150)
122
(50)
32
(0)
-40
(-40)
Temperature
See Figure 2 for the maximum and minimum
operating temperatures.
Level
Figure 2. Temperature
2110
Mounting
3/4-in. BSPT (R) or NPT
1-in. BSPT (R) or BSPP (G) thread, or
Hygienic 2-in. (51 mm) Tri-clamp fitting
1160 (80)
Process Temperature F (C)
Ambient Temperature F (C)
Housing Materials
Body: 304 SST with polyester label
LED window:
Flame retardant Polyamide (Pa12) UL94 V2
Plug: Polyamide glass reinforced
Plug seals: Nitrile butadiene rubber
1450 (100)
176 (80)
122 (50)
32 (0)
-40 (-40)
-40
(-40)
32
(0)
140
(60)
302
(150)
Process Temperature F (C)
Switching Point (water)
0.5 in. (13 mm) from fork tip if mounted vertically.
0.5 in. (13 mm) from the fork edge if mounted
horizontally.
The switch point varies with different liquid densities.
Liquid Density
Minimum 37.5 lb/ft3 (600 kg/m3)
Level - 391
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Liquid Viscosity Range
0.2 to 10000 cP (centiPoise)
Solids Content and Coating
Maximum recommended diameter of solid particles
in the liquid is 0.2 in. (5 mm).
For coating product, avoid bridging of forks.
Switching Delay
1 second dry-to-wet or wet-to-dry
CIP (Clean In Place) Cleaning
Withstands steam cleaning routines up to 302 F
(150 C)
Grounding
The 2110 should always be grounded either through
the terminals or using the external ground connection
provided.
Direct Load Switching (Electronics Type Code 0)
Operating Voltage
21 to 264 Vac (50 to 60 Hz)/dc
Maximum switched load
500 mA
Maximum peak load
5 A for 40 ms max.
Minimum switched load
20 mA continuous
Voltage drop
6.5 V @ 24 Vdc / 5 V @ 240 Vac
Current draw (load off)
<3.0 mA continuous
Load
0V/N
Electrical
Switching Mode
User selectable (Dry=on or Wet=on) by selecting
plug wiring
Cable Connection
Via 4-way plug provided (DIN43650).
Max. conductor size is 15AWG.
4-position orientation (90/180/270/360 deg).
Conductor Size
Maximum 0.06 in.2 (1,5 mm2)
Level
+V/L
PE
PNP Switching (Electronics Type Code 1)
Operating Voltage
18 to 60 Vdc
Maximum switched load
500 mA
Maximum peak load
5 A for 40 ms max.
Voltage drop
<3 V
Supply Current
3 mA nominal
Output current (load off)
<0.5 mA
Cable Gland
PG9 provided. Cable diameter 0.24 to 0.31 in.
(6 to 8 mm)
+V
PLC
0V
2110
Protection
Polarity insensitive. Over-current, short circuit, and
load-missing protection. Surge protection to
IEC61326.
PE
Product Certifications
L.V. Directive
EN61010-1 Pollution degree 2,
Category II (264V max),
Pollution degree 2, Category III (150 V maximum)
Overfill Protection
If required, select Product Certificates code U1 for
DIBt/WHG overfill protection.
The approval number is Z-65.11-236.
Electro Magnetic Compatibility (EMC) Directive
EN61326
Canadian Registration Number (CRN)
The CRN is 0F04227.2C for model numbers with a
NPT threaded process connection selected.
Level - 392
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Dimensional Drawing
2-in. Tri-Clamp
Notch to indicate
fork orientation
1.614 (41) A/F Hexagon
1-in. or 3/4-in. Thread
1.50
(38)
0.51 (13)
Switchpoint
0.51 (13)
Switchpoint
Cable Gland
Supplied
B
D
External Earth
Point/Connector
A
C
2.72 (69)
1.97 (50)
7.40 (188)
N/A
2.72 (69)
1.97 (50)
7.40 (188)
N/A
1-in. BSPT (R)
2.72 (69)
1.97 (50)
7.40 (188)
N/A
1-in. BSPP (G)
3.07 (78)
2.36 (60)
7.91 (201)
N/A
2-in. (51 mm) Tri-Clamp
2.72 (69)
1.97 (50)
7.40 (188)
2.52 (64)
1-in. Semi-extended
4.57 (116)
3.86 (98)
9.41 (239)
N/A
/4-in. BSPT (R)
3/4-in.
NPT
Level
2110
Process Connections
Level - 393
Product Data Sheet
00813-0100-4029, Rev DA
Catalog 2011 - 2012
Rosemount 2110
Rosemount Level Solutions
Emerson provides a complete range of Rosemount products for level measurement applications.
Vibrating Fork Switches Point Level Detection
Guided Wave Radar Level and Interface Measurement
For high and low alarms, overfill protection, pump control,
including wide pressure and temperature requirements, and
hygienic applications. Flexible mounting. Immune to changing
process conditions and suitable for most liquids.
The product line consists of:
Top mounted, direct level and interface measurement of liquids or
solids, including those with wide temperature and pressure
requirements. Unaffected by changing process conditions. Good
fit for small spaces and easy swap for older technologies.
The product line consists of:
Rosemount 2160 Wireless
Rosemount 5300 Series Accurate, superior performance
transmitter in most applications including process vessels and
control
Rosemount 2130 Enhanced
Rosemount 2120 Full-featured
Rosemount 3300 Series Versatile and easy-to-use transmitter
in most liquid storage and monitoring applications
Rosemount 2110 Compact
Differential Pressure Level or Interface Measurement
Flexible mounting for liquid tank levels, including those with wide
temperature and pressure requirements. Can be isolated by
valves. Unaffected by: vapor space changes, surface conditions,
foam, corrosive fluids, internal tank equipment. Optimize
performance with direct mount, Tuned-System Assemblies:
Rosemount DP Level Transmitters and Remote Seals
Rosemount 3051S_L, 3051L, and 2051L Liquid Level
Transmitters
Ultrasonic Level Measurement
Top mounted, non-contacting for simple tank and open air level
measurements. Unaffected by fluid properties such as: density,
viscosity, dirty coating, and corrosiveness. Appropriate for
routine applications outside of explosion proof areas.
The product line consists of:
Level
Non-contacting Radar Level Measurement
Top mounted, direct level measurement for liquids or solids,
including those with wide temperature and pressure requirements.
Can be isolated by valves. Unaffected by changing process
conditions. Good for dirty, coating, and corrosive applications.
The product line consists of:
Rosemount 5400 Series Accurate, superior performance
2-wire transmitters for most liquid level applications and
process conditions
Rosemount 5600 Series 4-wire transmitters with maximum
sensitivity and performance for solids, challenging reactors,
rapid level changes, and excessive process conditions
Chambers for Process Level Instrumentation
Rosemount 9901 High quality chambers for external
mounting of level measurement and control instrumentation on
process vessels
Rosemount 3100 Series Ultrasonic Process Level
Transmitters
2110
The Emerson logo is a trademark and service mark of Emerson Electric Co.
Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc.
All other marks are the property of their respective owners.
Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale
2010 Rosemount, Inc. All rights reserved.
Emerson Process Management
Rosemount Measurement
8200 Market Boulevard
Chanhassen, MN 55317 USA
Tel (USA) 1 800 999 9307
Tel (International) +1 952 906 8888
Fax +1 952 949 7001
www.rosemount.com
00813-0100-4029 Rev DA 12/10
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
Tel +41 (0) 41 768 6111
Fax +41 (0) 41 768 6300
Emerson FZE
P.O. Box 17033
Jebel Ali Free Zone
Dubai UAE
Tel +971 4 811 8100
Fax +971 4 886 5465
Emerson Process Management
Asia Pacific Pte Ltd
1 Pandan Crescent
Singapore 128461
Tel +65 6777 8211
Fax +65 6777 0947
Service Support Hotline: +65 6770 8711
Email:
[email protected]
