Scribd
Upload
175 views1 page

HV Divider Dvr150 - Brochure

The DVR-150 and DVR-300 are precision high voltage dividers that can measure AC or DC voltages up to 150kV and 300kV respectively. They have 1000:1 and 10,000:1 voltage division ratios that allow most digital voltmeters and oscilloscopes to measure extremely high voltages. The dividers include a switch to match various meter impedances and can be used to analyze high voltage waveforms or calibrate high voltage equipment.

Uploaded by

Anonymous HFIQgANMQ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
175 views1 page

HV Divider Dvr150 - Brochure

The DVR-150 and DVR-300 are precision high voltage dividers that can measure AC or DC voltages up to 150kV and 300kV respectively. They have 1000:1 and 10,000:1 voltage division ratios that allow most digital voltmeters and oscilloscopes to measure extremely high voltages. The dividers include a switch to match various meter impedances and can be used to analyze high voltage waveforms or calibrate high voltage equipment.

Uploaded by

Anonymous HFIQgANMQ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

High Voltage AC/DC Precision Dividers

DVR-150 & DVR-300

0-150 kV & 0-300 kV AC & DC Voltage


Description
The DVR-150 and the DVR-300 are precision resistor/capacitor high voltage
dividers that provide low voltage outputs proportional to the applied high
voltage input. Their 1000:1 & 10,000:1 ratios, respectively, extend the
measurement capability of most digital voltmeters and oscilloscopes to
150,000 volts or 300,000 volts. The divider includes a switchable low end
impedance to match various metering inputs.
Both are suited for waveshape/harmonic analysis using a standard oscilloscope and can be used to measure DC multiplier circuits or AC transformers, limited only by the Digital Volt Meter (DVM) connected as the metering
device. They are not designed for impulse or square wave applications.

Features

Can be used as a reference for in-house high voltage calibrations


Designed to be used with most DMMs or oscilloscopes
No external power sources required
Switch selectable 10 Meg or
1 Meg low end impedance
Light weight, transit sturdy
assembly
Less susceptible to effects
of electric field proximity
Control Layout

DVR-150

Cable
Length
Specifications
Voltage Range

1 - 150 kV or 1 - 300 kV DC or AC to 1 kHz sinusoidal


Output

DVR-150: 1.0 Volt per 1 kV applied


DVR-300: 0.1 Volt per 1 kV applied

Accuracy & Temp Ratings 0.5%, 50 to 104F, 10 to 40C


Input Resistance

DVR-150: 715 MW DVR-300: 1430 MW

Input Capacitance

DVR-150: 96.3 pF, DVR-300: 49 pF

Cables Provided

25 ft. (7.6M) RG58/U coaxial & Ground lead


Divider
Termination

DVR-150: 13 (330mm) diameter spinning


DVR-300: 24 (559 mm) diameter spinning


Size & Weight
DVR-300

ISO 9001:2008
HIGH VOLTAGE, INC.

DVR-150: 13 w x 13 d x 14.5 h, 20 lbs.


330 mm w x 330 mm d x 622 mm h, 9 kg
DVR-300: 24 w x 24 d x 61 h, 85 lbs.
610 mm w x 610 mm d x 1550 mm h, 39 kg
HVI: The Worlds VLF Source
All HVI Products are Made in the USA

31 County Rt. 7A Copake, NY 12516 (518) 329-3275 Fax: (518) 329-3271


E-Mail: [email protected] Web: www.hvinc.com

High Voltage, Inc. designs and manufactures high voltage test equipment for utility and industrial applications.
Products include VLF AC hipots, fault locators/thumpers, AC and DC hipots, aerial lift testers, HV dividers, oil dielctric testers, and more.
OCT 2014/DVR-150/DVR-300

You might also like