Scribd
Upload
265 views2 pages

Secondary Containment Guide

Secondary containment is required for storing hazardous materials to collect any spills and prevent releases into the environment. Hazardous materials that require secondary containment include chemicals stored in containers over 55 gallons for liquids or 550 pounds for solids. A flow chart is provided to help determine if a material requires secondary containment based on its hazards and container size. Secondary containment guidelines specify that containers be surrounded by a barrier able to hold at least 110% of the largest container's volume to collect any spills and prevent impacts. Requirements aim to safely store hazardous materials and prevent uncontrolled mixing, discharge, or damage from leaks and spills.

Uploaded by

James Glerry Aaron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
265 views2 pages

Secondary Containment Guide

Secondary containment is required for storing hazardous materials to collect any spills and prevent releases into the environment. Hazardous materials that require secondary containment include chemicals stored in containers over 55 gallons for liquids or 550 pounds for solids. A flow chart is provided to help determine if a material requires secondary containment based on its hazards and container size. Secondary containment guidelines specify that containers be surrounded by a barrier able to hold at least 110% of the largest container's volume to collect any spills and prevent impacts. Requirements aim to safely store hazardous materials and prevent uncontrolled mixing, discharge, or damage from leaks and spills.

Uploaded by

James Glerry Aaron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Secondary Containment for Hazardous Materials Storage Guidelines

Secondary containment is defined as a means of surrounding one or more primary storage


containers to collect any hazardous material spillage in the event of loss of integrity or container
failure. Hazardous materials must be stored in secondary containers to prevent or minimize the
possibility of accidental release as well as to ensure compliance with certain local, state and
federal regulations dealing with chemical storage. Hazardous materials includes, but not
limited to chemicals, hazardous waste and oil-filled equipment. Please refer to the secondary
containment flow chart below for assistance in determining if secondary containment is required.

Secondary Containment Decision Process


Is it a
hazardous
material?

Start

no

No secondary
containment needed

yes

no

Life or environmental
hazard?

Container size

yes
no

Single container no
_> 55 gal (liq) or
550 lb (solid)?
yes

Multiple vessels
_> 1,000 gal (liq) or
10,000 lb (solid)?

Will material
threaten personnel or no
the environment (e.g.,
contaminates soil or
water) if it leaks?

yes

Secondary
containment needed

yes

no

Could material
produce an
incompatible
chemical reaction
with other nearby
substances (e.g.,
emit toxic gas,
ignite, explode,
etc.)?
yes

Contain 110% of the volume of the largest container. If multiple containers, must contain either 10% of the aggregate
volume or 150% of the largest container, whichever is greater. If in an interior Haz Mat storage room, must also contain 20
minutes of sprinkler flow, at the design flow rate for that area, plus the volume of the chemical container. If stored in an
exterior storage area and open to rainfall, must contain the volume of the chemical container plus the volume of a 24hour rainfall as determined by a 25-year storm and provisions shall be made to drain accumulations of the rainwater.

SECONDARY CONTAINMENT REQUIREMENTS

All liquid hazardous materials must be in approved secondary containment to prevent


release and uncontrolled:
o mixing of incompatible chemicals
o discharge of hazardous materials through unplugged drains, cups sinks, storm
drains, sewers, etc.
o damage associated with liquid materials leaking through tile and concrete floors
to workplaces below.
All liquid hazardous materials must be in approved secondary containment whenever
stored on a floor.
All hazardous materials must be in approved secondary containment whenever it has
been declared a waste.
Hazardous materials stored in non-approved or sub-standard storage cabinets or units that
may pose an additional risk (flammables or oxidizers in wood cabinets) must be placed in
secondary containment until an approved storage unit is installed.
Secondary containment is required whenever specified by a federal, state or local
regulation.

CONTAINMENT VOLUME

Secondary containment for a single container will be 110 percent of the primary
container.
Secondary containment for multiple containers will be 150 percent of the largest
containers volume or 10 percent of the aggregate volumes of all the containers,
whichever is greater.

CONTAINMENT CONSTRUCTION

Secondary containment must be compatible with the stored materials and be constructed
of materials capable of containing a spill or leak.

You might also like