SCHEME OF INSTRUCTION AND EVALUATION

I SEMESTER OF II YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME

ELECTRICAL & ELECTRONICS ENGINEERING
Hours of instructions per week
Course
No.

Course

Lectures

Drawing /
Tutorials
Practicals

Scheme of evaluation
External Evaluation Sessionals
Duration
Max
Max
of Exam.
Marks
Marks

Total
marks

MH 211

Mathematics-II

3 Hrs

100

50

150

EE 212

Network Theory

3 Hrs

100

50

150

EE 213

Basic Electrical Engineering

3 Hrs

100

50

150

EE 214

Electrical Engineering Materials

3 Hrs

100

50

150

EI 215

Electronic Devices and circuits-I

3 Hrs

100

50

150

CE 218

Fluid Mechanics & Hydraulic

Machines
Basic Electrical Engineering Lab

3 Hrs

100

50

150

EE 215
EE 217

Networks Laboratory
Total

3 Hrs

50

25

75

3 Hrs

50

25

75

18

1050

MH-211 MATHEMATICS-II
Class: II/IV B.Tech. I Semester
Branch: Mech, Civil, E&I, EEE,CSE,IT,ECE
Duration of University Examination: 3 hours

Lectures: 3, Tutorial:1
University Examination:100 marks
Sessionals:50 marks

UNIT - I
1.

Complex Integration: Line integration in complex plane, Cauchys integral Theorem,

Cauchys integral formula. Series expansion of complex functions: Taylors series and
Laurents series, Zeros and singularities. Residues- Residue Theorem- evaluation of real
integrals using Residue Theorem ( contours of the type semi circle and circle only)
8+3
UNIT- II

2.

Laplace Transforms: Laplace transform-Inverse Transform-Properties of Laplace

Transforms- Laplace Transform of unit step function, impulse function, and periodic
functions- Convolution theorem, Solution of ordinary differential equations with constant
coefficients and system of ordinary differential equations with constant coefficients using
Laplace Transforms.
8+3
UNIT - III

3. Fourier Series: Expansion of a function as Fourier series for a given range- Fourier series of

even and odd functions- Half range cosine and sine series expansions.

8+3

UNIT - IV
4.

Partial Differential Equations: Solution of wave equation, Heat flow equation, and Laplace
equation by the method of separation of variables and problems of vibrating string, One
dimensional unsteady heat flow, two dimensional steady state heat flow(Problems based on
Fourier-Trigonometric series only)
12+3

TEXT BOOK:
1.

B.S.Grewal, Higher Engineering Mathematics, Khanna Publishers, New Delhi.

REFERENCE BOOKS:
R.V.Churchill, Complex Variables and its Applications, McGraw-Hill, New York.
M.K.Venkatraman, Engineering Mathematics, Vol.III, National Publishing Co.,
Madras.
3. E.Kreyszig, Advanced Engineering Mathematics, Wiley Eastern Ltd., New Delhi.
1.
2.

EE - 212 NETWORK THEORY

Class: II/IV B.Tech. I Semester
Branch: EEE,
Duration of University Examination: 3 hours

Lectures: 3, Tutorial:1
University Examination:100 marks
Sessionals: 50 marks

UNIT - I
Network Topology : Topological description of networks - Lumped Vs Distributed circuits Network graph theory - Tress, Co-Tress and loops - Incidence matrix - Tie-set and cut-set
Matrices - Kirchoff's Laws and analysis of Networks.
Network Theorems and applications for A.C. Circuits : Thevenin's - Norton's - Reciprosity Millmen's - Maximum power-Telligen's Compensation and Substitution Theorems.
(9 + 3)
UNIT - II
Time response analysis of networks: Transient analysis of R-L,R-C,R-L-C series and parallel
networks with step , impulse , sinusoidal and pulse excitation-initial conditions-Special signal
waveforms-Ramp ,Triangular , Train of pulses, delayed input.
P-SPICE : Introduction to P-SPICE - representation of circuit elements - Analysis of circuits
using P-SPICE - Simple problems
(9+3)
UNIT - III
Two port networks : Characterisation of linear time invariant two port networks - Open circuit
impedance Parameters - Short circuit admittance parameters - transmission parameters Inverse
transmission parameters - Hybrid parameters -Inverse Hybrid parameters - Inter relationship
between parameters - Inter connections of two port networks Ladder network-Bridged-T,
Parallel-T and Lattice-T network-Network representation of element devices - Network
transmission criteria.
(9+3)
UNIT - IV
Network Functions : Network functions for 1-port and 2-port networks and their relationships Ladder Networks - General Networks - Poles and Zeros of Network functions - Restrictions of
pole-zero locations for driving point functions.
Network Synthesis : Positive real function properties - Hurwitz Polynomials - Even and odd
functions - Test for positive Real functions - Elementary synthesis operation - Properties and
Foster and Cauer forms of RL, RC and LC networks.
(9+3)
TEXT BOOKS:
1.
2.
3.
4.

M.E.Van Valkenberg, Network Analysis PHI

W.H.Hayt and Jr.Kemmerly, Engineering Circuit Analysis TMH
Muhammed H.Rasheed., SPICE for Circuits and Electronics Using P-Spice.
James.W.Nilson, Electric Circuits PearsonEducation

REFERENCES:
1. J.Edminister & M.Nahvi, Electric Circuits Schaums Outlines,TMH
2. D.Roy Choudhary, Network analysis and SynthesisNew age Publishers
3. K.A.Gangadhar, Circuit Theory Khanna Publishers

EE 213

BASIC ELECTRICAL ENGINEERING

Class: II Year B.Tech. I Semester

Branch: EEE,CSE &IT
Duration of University Examination: 3Hrs

Lectures: 3; Tutorial: 1
University Examination: 100 Marks
Sessionals: 50 Marks
UNIT I

D.C. Circuits : Ohms Law , Network Elements ,Kirchhoffs Laws , Source Transformation ,
Mesh and Nodal Analysis ,Power in D.C.Circuits,Series, Parallel and Series Parallel combination
of Resistances ,network reduction by Star Delta Transformation , Superposition, Thevenins ,
Nortons, and Maximum power transfer theorems for D.C Circuits.
(9+3)
UNIT II
1- A.C. Circuits :Phasor representation of sinusoidal quantities ,Average , R.M.S. values and
Form factor, A.C. through Resistor, Inductor and Capacitor, Analysis of R-L-C series and
parallel circuits , Power factor , Power triangle , Series Resonance.
Measurements :Working principle of Moving coil , Moving Iron Ammeters and Voltmeters
Dynamometer type Wattmeter and 1 - Induction type Energy meter.
3- A.C. Circuits: Production of 3 -Voltages, Voltage& Current relationships of Line and
Phase values for Star and Delta connections , 3- Power Measurement by two-wattmeter
method.
(9+3)
UNIT III
Magnetic circuits: Self and Mutual Inductance, Dot Convention, Coefficient of Coupling.
D.C.Machines: Constructional features, Methods of Excitation, E.M.F.Equation, Characteristics
of Series, Shunt and Compound Generators and Applications, Torque development in D.C
motor, Characteristics of Series, Shunt and Compound motors and Applications.
Single Phase Transformers: Construction and operation principle, Development of No Load
&On Load Phasor diagrams, Equivalent circuit, O.C.and S.C.tests, Losses and Efficiency,
Voltage regulation.
(9+3)
UNIT IV
3-Phase Induction Motor: Constructional features, Principle of Operation, Production of
Rotating Magnetic Field, Torque Slip Characteristics, Applications.
1-Phase Induction Motors: Production of Rotating Field in various type of 1 Phase Motors
Split Phase, Capacitor Start, Capacitor run, Shaded Pole motors and Applications.
Synchronous Generators and Motors: Principal of Operation and its Applications.
(9+3)
TEXT BOOKS:
1.Vinvent Del Toro PRINCIPLES OF ELECTRICAL ENGINEERING PHI
2.Edward Hughes, ELECTRICAL TECHNOLOGY , Pearson Publisher
REFERENCE BOOKS:
1.M.S. Naidu & S.Kamakshaiah, INTRODUCTION TO ELECTRICAL ENGINEERING
2.B.L.Thereja, A.K.Thereja, ELECTRICAL TECHNOLOGY S.Chand & Company Ltd.
3.Sudhakar and Shyam Mohan NET WORK ANYLYSIS AND SYNTHESIS TMH
4.Nagrath and kothari BASIC ELECTRICAL ENGINEERING TMH

EE-214 ELECTRICAL ENGINEERING MATERIALS

Class: II Year B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 Hrs

Lectures : 3 Tutorial: 1
University Examination: 100 Marks
Sessionals: 50 Marks
UNIT-I

1. Classification of Materials: Introduction, Atomic Theory, Inter Atomic Bonds

2. Conducting Materials: Introduction,Resistivity and factors affecting resistivity,
Classification of Conducting materials into low-resistivity and high resistivity materials,
Low Resistivity Materials and their Applications ,Resistivity Materials and their
applications,Superconductiong Materials.
UNIT-II
3. Semiconducting Materials: Introduction ,The Atom, Conductors and Insulators,
Semiconductors, Electron Energy and Energy Band Theory, Excitation of atoms,
Insulators, Semiconductors and Conductors, Semiconductor Materials,Convalent Bonds,
Intrinsic
Semiconductors-Type Materials, P-Type Materials,Manority and
Minority Carriers, Semi-Conductors Materials, Applications of Semiconductor Materials.
4. Dielectric Materials: Introduction, Dielectric constant of Permittivity, Polarisation,
Dieletric Losses, Electric Conductivity of Dielectrics and their Break Down, Properties of
Dielectrics, Applications of Dielectrics.
UNIT-III
5. Insulating Materials: Introduction, General properties of Insulating materials,
Classification, Properties, Insulating Gasses.
6. Magnetic Materials: Introduction, Classification, Magnetization curve, Hysteresis,
Eddy Currents, Curie point, Magnetostriction, Soft and Hard Magnetic materials,
UNIT-IV
7.
8.

Materials for special purposes: Introduction, Structural materials, Protective materials,

Other Materials.
Electronic Components: Resistors, Capacitors, Inductors, Transformers.

TEXT BOOKS:
1

S.K.BHATTACHARYA ELECTRICAL ENGINEERING MATERIALS

S.K.Kataria & Sons.

REFERENCE BOOKS:
1.

A.J.Dekker ELECTRICAL ENGINEERING MATERIALS PHI

EI-215 ELECTRONIC DEVICES AND CIRCUITS I

Class: II/IV B.Tech. I Semester
Branch: ECE, E&I, EEE
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Review of semiconductor diodes. Continuity equation. Junction capacitance. Temperature
dependence of p-n junction. Halfwave rectifier and fullwave rectifier, Bridge rectifier with
and without filters. Ripple, Regulation. Series and shunt regulators. Introduction to SMPS.
UNIT II
Transistors, current components in NPN and PNP transistors, Ebers-Moll model. Small Signal
LF h-parameter model, Determination of h-parameters Analysis of transistor amplifier using hparameters in CE, CB and CC configuration simplified analysis for these configurations,BJT as
a switch.
UNIT III
FETs : JFET-V-I characteristics, MOSFET Enhancement and Depletion type MOSFETs. Small
signal model Analysis of CS, CD amplifier.
Principles, characteristics and applications of SCR, UJT, Tunnel diode, Varactor diode. Diac
Triac LED, Photo diode and Photo Transistor.
UNIT IV
Transistor biasing Thermal runway and thermal stabilization. The operating point stability
Collector to-base, self Bias. Stabilization against variations in VBE and Beta for self bias
circuits, FET biasing, Source self bias. Zero current drift biasing. Biasing against device
variation. Biasing of enhancement type MOSFET.
TEXT BOOKS:
1. Jocob Millman & Christos C.Halkias, Electronic Devices and Circuit, McGraw Hill,
1991.
2. Robert Boylestad & Lowis Nashelsky, electronic Devices and Circuit theory, Prentice
Hall of India, 5th Ed., 1993.
3. Donald L Schilling & Charles Belove, Electronic Circuits: Discrete & Integrated,
McGraw Hill International Edition, 3rd Edition., 1989.

CE-218

FLUID MECHANICS AND HYDRAULIC MACHINES

Class: II Year B.Tech. I Semester

Branch: EEE
Duration of University Examination: 3 Hrs

Lectures: 3; Tutorials: 1
University Examination: 100 Marks
Sessionals: 50 Marks

UNIT - I
1 Introductory concepts and Definitions: Properties of fluids; Fluid statics; pressure at a
point; Hydrostatic pressure; Manometry; Hydrostatic forces on plane and curved Surfaces;
Buoyancy; Stability of floating bodies Metacentric height:
(5+3)
Fluid Kinematics; Description of fluid flow; Velocity field; Acceleration of fluid element
in general 3-D flow; Streamlines; Rotation of fluid Element and Conditions for irrotational
flow; in 3-D flow and along a stream tube.
UNIT - II
2. Fluid Dynamics; Eulers equation in 3-D flow and along a stream tube; Its integration to
yield Bernoulli Equation and underlying assumptions; Energy equation; Linear-Momentum
equations; Applications through orifices; Mouthpieces; Liquid Jets etc; Time of emptying of
Vessels; Measurement of velocity and flow with pitot tube, prandtl tube, venturimeter,
orificemeter, flow nozzle, Rotameter, sharp,crested,weirs:
(9+3)
UNIT - III
3. Dimensional analysis and Dimensionless numbers; Formation of equations by
Buckinghams II method, model Analysis.
(3+1)
Viscous Flow; Laminar flow through pipes and parallel plates by one-dimensional
approach; Turbulent flow through pipe; velocity distribution; smooth and rough pipes;
friction factor; moodys chart; Local losses in pipes; problems of flow through pipes;
plotting of energy gradient and hydraulic lines:
(5+1)
UNIT - IV
4.

Hydraulic machinery; Angular Momentum equation for a fluid machine; Hydraulic turbines
Main
energy transfer types and their features; Application of basic tube functions and
types; Main and
Operational characteristics; cavitation and Methods to avoid it;
Centrifugal and reciprocating pumps; construction and function of various components;
simple calculations; characteristics.
(10+2)

TEXT BOOKS AND REFERENCES:

1.
2.
3.
4.
5.
6.
7.

V.L. streeter ; Fluid Mechanics, Mc Graw Hill Book Co.

A.K. Mohanty : Fluid Mechanics, Prentice Hall India.
K.L. Kumar :
Engineering Fluid Mechanics.
Jagadish lal:
Hydraulic and Fluid Mechanics, Metropolitan Book Co.
P.N. Modi and S.M. Seth: Fluid Mechanics, Standard publishers.
A.K. jain : Fluid Mechanics, Khanna publishers.
Jagdish Lal: Hydraulic Machines, Metropolitan Book Co.

EE - 215 BASIC ELECTRICAL ENGINEERING LABORATORY

Class: II Year B.Tech. I - Semester
Branch: EEE,CSE,IT

Practicals: 3
Sessionals: 50 marks

LIST OF EXPERIMENTS

1. Verification of Superposition Theorem

2. Verification of Thevenins Theorem
3. Verification of Maximum Power Tranfer Theorem
4. Measurment of 3-Phase Power By Two Watt Meter Method
5. Frequency Response of R-L-C Series Circuit
6. Determination of Parameters of a Choke Coil
7. O.C And S.C Tests on 1-Phase Transformer
8. Efficiency And Voltage Regulation of a 1-Phase Transformer By Direct Load Test
9. Speed Control of A D.C Shunt Motor
10. Load Test on 3-Phase Induction Motor

EE - 217 NETWORK LABORATORY EXPERIMENTS

Class: II Year B.Tech. I - Semester
Branch: EEE

Practicals: 3
Sessionals: 50 marks

LIST OF EXPERIMENTS

1. Verification of Superposition Theorem for AC circuits.

2. Verification of Thevenin's Theorem for AC circuits.
3. Verification of Maximum Power Transfer Theorem for AC circuits.
4. Verification of Reciprocity Theorem for AC circuits.
5. Determination of Z - Y parameters of Two-port network
6. Determination of ABCD Parameters & Inverse ABCD Parameters of Two-port network.
7. Determination of Hybrid Parameters & Inverse Hybrid Parameters of Two-port network.
8. Determination of Self and Mutual inductance and coefficient of coupling for coupled
circuits.
9. 9. Time response of second order R - L - C Series circuit.
10. 10.Analysis of circuits using P-SPICE

SCHEME OF INSTRUCTION AND EVALUATION

II SEMESTER OF II YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME
ELECTRICAL & ELECTRONICS ENGINEERING
Hours of instructions per week
Course
number

Course

Lectures

Tutorials

Drawing /
Practicals

Scheme of evaluation
External Evaluation Sessionals
Duration of Max
Max
Exam.
Marks
Marks

Total
marks

MH 221

Mathematics III

3 Hrs

100

50

150

EE 222

Electrical Machines-I

3 Hrs

100

50

150

EE 223

Electrical Measurements

3 Hrs

100

50

150

EE 224

Electromagnetic fields

3 Hrs

100

50

150

EI 224

Electronic devices and circuits II

3 Hrs

100

50

150

EC 225

Signals & Systems

3 Hrs

100

50

150

EE 225

Electrical Measurements Lab

2 Hrs

50

25

75

EI 2210

Electronic circuits Laboratory

2 Hrs

50

25

75

Total

18

1050

MH- 221 MATHEMATICS-III

Class: II Year B.Tech. II Semester
Branch: Mech, Civil, E&I, EEE, CSE, IT, ECE
Duration of University Examination: 3 Hrs

Lectures: 3 Tutorial: 1
University Examination: 100 Marks
Sessionals: 50 Marks

UNIT I
1. MATRICES: Rank of matrix-Solution of system of linear equations-linear

dependence and independence of vectors-Characteristic roots and characteristic

vectors of a matrix-Caley Hamilton s Theorem (without proof)-Reduction of a
matrix to diagonal form and normal form-Reduction of a quadratic form to
canonical form.
8+3
UNIT II
2.

PROBABILITY & STATISTICS: Curve fitting-Method of least squares- Straight

line and parabolic curves-correlation coefficient rank correlation- regressionlinear regression equations.
Random variables-Discrete land continuous
distributions-Density and distribution functions- Illustration through Binomial,
Poisson and normal distributions
12+4
UNIT III

3. NUMERICAL ANALYSIS: Interpolation-Forward and Backward differences interpolationNewtons and Lagranges formulae.
4. NUMERICAL DFFERENTIATION AND INTEGRATION: First and Second derivatives
using forward and backward interpolation- Numerical integration-Trapezoidal and
Simpsons rule.
8+3

UNIT IV
5. SOLUTION TO SYSTEM OF LINEAR EQUATIONS: Jacobi, Gauss Siedel
iteration method-Solution of algebraic and transcendental equations Bisection
method, Regula- Falsi method and Newton Raphsons method.
6. NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS:
Taylors method, Picards method, Eulers method and Runge-Kutta methods of
second and fourth orders.
8+3
TEXT BOOK:
1.

B.S.Grewal, Higher Engineering Mathematics, Khanna Publishers, New Delhi.

REFERENCES BOOKS:
1.
2.
3.

S.S.Sastry, Introduction to Numerical Analysis, Prentice Hall of India, New Delhi.

E.Kreyszig Advanced Engineering Mathematics, Wiley Eastern Ltd., New Delhi.
Gupta and Kapoor, Fundamentals of Mathematical Statistics, S.Chand and Co.,
New Delhi.

EE 222 ELECTRICAL MACHINES I

Class: II/IV B.Tech. II Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks
UNIT I
1. 1.Basic Principles of Rotating Electrical machines: Principles of Electromechanical
Energy Conversion, singly and doubly excited systems Basic constructional features of
rotating Electrical machines.
2. DC Generators: Principle of operation, Armature windings, Simplex and Multiplex lap and
wave windings, Types of DC Generators, emf equation.
(9+3)
UNIT II
3. Armature reaction: Demagnetizing and cross magnetizing Ampere Turns Interpoles compensating windings, Commutation Reactance voltage-Methods of improving
commutation. Methods of excitation-separately and self excited generators-voltage buildup in
shunt generators, critical field resistance and critical speed- Parallel operation of DC
Generators-Use of equalizer bars- Load sharing- characteristics and Applications of Shunt ,
Series & compound Generators.
(9+3)
UNIT III
4. 4.D.C. Motors: Principle of operation-Back emf- Torque Equation- Classification of DC
motors-Speed Control- Starters- Losses and Efficiency - Testing of DC machines,Brake TestSwinburnes Test - Hopkinsans Test- Retardation Test- Fields Test -separation of Stray
losses- characteristics and applications of DC motors.
(9+3)
UNIT IV
5. 5.Transformers, Single Phase Transformers: Constructional features, principle of
operation, emf equation, operation on no load and on load, Development of equivalent
circuit, Determination of equivalent circuit parameters, phasor diagram, losses, ordinary
efficiency and All day efficiency, Separation of circuit losses, regulation, approximation and
rigorous expressions, predetermination of performance by OC and SC tests, Suppress test,
Parallel operation, Load sharing,
6. Auto Transformer: principle of working, saving of copper as compared to two winding
Transformer.
7. 7.Three Phase Transformers: Types of connections, Relation between line and phase
voltages and currents, Three winding Transformer,Use of tertiary winding, Scott connection
of Transformers for phase conversion, Tap changing, Off load and On load, Induction
Regulator.
(9+3)
TEXT BOOK:
1. P.S. Bimbhra, ELECTRICAL MACHINARY 5/e, Khanna Publishers.
REFERENCE BOOKS:
1. R.D. Begamudre, ELECTROMECHANICAL ENERGY CONVERSIONS WITH
DYNAMICS OF MACHINES 2/e Wiley Eastern Edition.
2. Claytons Hancock PERFORMANCE of DC MACHINES
3. M.G. Say , PERFORMANCE of AC MACHINES
4. Nagrath and Kotari ELECTRICAL MACHINES TMH

EE-223

ELECTRICAL MEASUREMENTS

Class: II/IV B.Tech. II Semester

Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
ELECTRICAL MEASURING INSTRUMENTS: Significance of Measurement, static
characteristics of measuring system- linearity-sensitivity- Precision-Accuracy. Permanent
magnet moving coil - Moving Iron - dynamometer - Induction - Thermal - Electrostatic
indicating instruments for measuring current, voltage and power. Q-meter and Synchroscope Errors and methods of reducing them in these meters Measurement of three phase power using
two watt meter method, Measurement of three phase reactive power using single wattmeter
method. Extension of Ranges of Voltmeters and ammeters. loading effect on measuring
instruments, Phantom loading.
(9+3)

UNIT II
INSTRUMENT TRANSFORMERS: Introduction-Advantages- Burden of instrument
transformer-Current transformer-errors in current transformer-effect of secondary open circuitPotential transformer-errors in potential transformers. Testing of current Transformers with
silsbees method.
POTENTIO METERS : D.C. Potentiometer and A.C. Potentiometers of Polar and Co-ordinate
type - Relative merits - Applications - Measurements of resistance - Calibration of Voltmeter,
Ammeter and Wattmeter.
(9+3)

UNIT III
BRIDGES: Principle of working - Types: Wheatstone, Kelvin, Maxwell, Owen, Schearing,
Wien, Kelvin's double bridge - - Megger.
MAGNETIC INSTRUMENTS: Measurement of Magnetic field - Types of instruments and
their principle of working Ballistic Galvanometer, Flux meter - B-H loop plotting
(9+3)

UNIT-IV
ELECTRONIC INSTRUMENTS: Cathode Ray Oscilloscopes (CRO) - Block diagram
representation - Cathode Ray Tube (CRT) - Electrostatic Deflection, Post Deflection Acceleration of Electron Beam - Expression for Deflection - Sensitivity - Screens for CRTs Time base generators - Free running and Triggered Sweeps - Attenuators - Probes - Applications
of CRO, Lissajous patterns - Measurement of frequency and phase. .
TRANSDUCERS: Transducers for measurement of non-electrical quantities Types and their
principle of working measurement of Linear displacement Acceleration Flow rate
Liquid level strain-Force-Pressure -Temperature.
(9+3)

TEXT BOOKS:
1. Electrical Measurement in Measuring Instruments. Goldwing E.W. and Widdies
2. Electrical and Electronics Measurement and Instrumentation Sahwany A.K.

REFERENCE BOOKS :
1. Modern Electronics Instrumentation Techniques Alfred D. Helthic & Willem D.Cooperr.

EE-224

ELECTRO MAGNETIC FIELDS

Class: II/IV B.Tech. II Semester

Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Introduction: Review of vector Algebra, Cartesian, -Cylindrical and Spherical Co-ordinate
Systems.Introduction to Electromagnetic Fields, Field theory Vs Circuit theory.
Static Electric Fields: Coulomb's law - Electric field intensity - Field due to different charge
configurations - Electric flux- Electric flux density - Gauss law and its ApplicationsDivergence theorem - Relation between D and E - Work done in moving a unit positive charge Electric potential-Absolute potential-Potential difference between two points and it is
independent of path of integration- Potentials caused by different types of charge configurations
- Relation between E and V- Potential and electric field at a point due to electric dipole - Torque
on electric dipole when placed in Electric field - Electro static energy-Energy density.
(9+3)

UNIT II
Electricfield in materials Conductors in Electrostatic Fields-Polarization in Dielectrics_Dielectric strength&constant. Boundary conditions between dielectrics
Boudary value problems: Laplace and Poisson's equations - Uniqueness theorem simple
examples method of images. Capacitance:Definition of capacitance - Parallel plate, Cylindrical
and Spherical capacitors Capacitance of multi conductor systems Conduction and Convection
currents.-Current
density
&Ohms
Law-Electromotive
force&KVL-Equation
of
Continuty&KCL-Boundary conditions for current density.
(9+3)

UNIT III
Static Magnetic fields : Concept of Magnetic field- Biot Savart's law- Ampere's law and its
applications - Magnetic flux and flux density - Magnetic field caused by different types of
current configurations - Scalar and Vector magnetic potentials-Calculation of Vector Magnetic
Potentials for simple cases-Vector Poissons equation.
Magnetic Forces: Force on a moving charge - Force on a differential current element - Force
between differential current elements. Field in dielectrics: Magnetic boundary conditions
Magnetic Dipole-Magnetisation in materials. Inductance: Concept of self inductance mutual
inductance, Calculation of Inductance of Solenoid, over headlines.
(9+3)

UNIT IV
Maxwell's equations & Electromagnetic Waves: Maxwell's equations for Static Fields
Faradays law- displacement current - Maxwell's equations for time varying fields Wave
Equation for free space, conducting medium-field Relation between E&H in plane waves Wave Propagation in good conductors and dielectrics - Poynting Vector and flow of power Power loss in a plane conductor.
(9+3)
TEXT BOOKS:
1. W.H. Hayt (Jr.) ENGINEERING ELECTROMAGNETICS TMH
2. Matthew.n.o.Sadiku ELEMENTS OF ELECTROMAGNETICS Oxford University Press.
3. Edward.C.Jordan&Keith.G.BalmainELECTROMAGNETICWAVES&
RADIAING
SYSTEMS
PHI.
REFERENCES:
1. 1.David.K.Cheng FIELD&WAVE ELECTROMAGNETICS Adison wesely Longman.
2. 2.K.A.Gangadhar FIELD THEORY Khanna publishers
3. John. D. Kraus and K.R. Carver ELECTROMAGNETICS TMH

EI- 224 ELECTRONIC DEVICES & CIRCUITS II

Class: II/IV B.Tech. II Semester.
Lectures:3,Tutorials:1
Branch: ECE , EIE, EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks

UNIT-I
SMALL SIGNAL LOW FREQUENCY TRANSISTOR AMPLIFIER CIRCUITS:
Analysis of Single Stage transistor amplifier circuits using h-parameters, RC coupled amplifier
Frequency response analysis, cascaded amplifiers.
HIGH FREQUENCY TRANSISTOR AMPLIFIER CIRCUITS:
High frequency model of a transistor and cut-off frequencies, single Stage and Multistage
amplifiers at High frequencies Calculation of Band Width of single and multistage amplifiers.
UNIT-II
DC AMPLIFIERS:
DC amplifiers, drift compensation techniques, differential amplifiers.
FET AMPLIFIERS:
FET Low frequency and High Frequency models; Low and High frequency response of amplifier
circuits, Analysis of Single and Multistage amplifier circuits.
UNIT-III
FEED BACK AMPLIFIERS:
Concept of feedback, Classification of feedback amplifiers, general characteristics of negative
feedback amplifiers, effect of feedback on amplifier characteristics.
OSCILLATORS:
Condition for Oscillations, RC and LC type oscillators, crystal oscillators, frequency and
amplitude stability of Oscillations.
UNIT-IV
POWER AMPLIFIERS:
Class A,B and AB power amplifiers: Push-Pull and Complementary push-pull amplifiers, design
of heat sinks, power o/p efficiency, cross over and Harmonic Distortion.
TUNED AMPLIFIERS:
Single tuned and Double tuned voltage amplifiers, Inter stage design, stability considerations,
class B and Class C tuned Power amplifiers.
TEXT BOOKS:
1. Milman & halkas, Integrated Electronics TMH, New Delhi.
2. Robart Boylestad & Lowis Nashelsky, Electronic Devices & Circuits
REFERENCE BOOKS:
M.S.Gausi, Electronic Circuits, John Wiley & Sons, New york.

EC -225 SIGNALS & SYSTEMS

Class: II/IV B.Tech. II Semester.
Branch: ECE, EIE, EEE
Duration of University Examination: 3 hours

Lectures:3,Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Signals Signals and their representation, classification of signals, singularity functions
Impulse, step, ramp functions, representation of signals withsingularity functions, exponential
functions.
Systems: Definition, Classification of Systems, Convolution integral, graphical convolution.
Signal Approximation Approximation of a function by a set of mutually orthogonal functions,
mean square error, complete set of orthogonal functions orthogonality in complex functions,
Trigonometirc and exponential Fourier series, representation of periodic functions by Fourier
series, complex Fourier spectrum.
UNIT II
Fourier Transforms and their applications to systems Fourier transform definition, properties
of F.Ts , energy spectral density, parsevals theorem, power spectral density, Hilbert transforms
and properties.
Linear Systems impulse response, response of a linear system, linear time invariant system,
linear time variant system, transfer function of LTI system.
UNIT III
Random Variables & Processes Probability, Joint Probability, Statistical independence,
Random Variables, cumulative distribution function, probability density function, relation
between probability & probability density, joint commutative distribution, average valve of
random variables, variance of a random variable, tchebycheffs inequality, the Gaussian
probability density, the error function, Rayleigh probability density, mean & variance of the sum
of random variables, correlation between random variables, central limit theorem.
UNIT IV
Discrete Time Signals & Systems: Discrete time signals, representation, operations on
sequences, Discrete time systems and classification, LTI systems, Linear Convolution,
Difference equations.
Z-Transforms: ROC, properties of Z-Transforms Inverse Z-Transforms, Causality and stability.
Realization of Discrete Systems: Structural realization of discrete systems Direct form I,
Direct form-II, Cascade and parallel forms.
TEXT BOOKS:
1.
2.
3.
4.

Simon & Haykins, Signals & Systems, Wiley Eastern Ltd.,

Zeimer, Signals & Systems, PHI.
Proakis, Digital Signal Processing: Principles, Algorithms and Applications.(PHI)
Simon & Haykin Signals & Circuits John Willey

REFERENCE BOOKS:
1. Oppenheim, Willsky & Young; Signals and Systems PHI, EEE, New Delhi.
2. P-Z Peebles Probabilities, Random Variables and Random Signal Principles TMH.
3. B.P. Lathi, Signals & Systems and Communication BSP.

EE-225 ELECTRICAL MEASUREMENTS LABORATORY

Class: II Year B.Tech. II Semester
Branch: EEE

Practicals: 3
Sessionals: 50

LIST OF EXPERIMENTS
1. Measurement of resistance using Kelvin's double bridge.
2. Measurement of Inductance using Maxwell's bridge.
3. Measurement of Capacitance using schering bridge.
4. Calibration of Ammeter and voltmeter with Potentiometer.
5. Measurement of EMF using A.C. Potentiometer.
6. Measurement of displacement using LVDT.
7. Measurement of strain using strain guage.
8. Measurement of magnetic flux using fluxmeter.
9. Measurement of frequency using CRO.
10.Measurement of temperature using Thermocouple.
11. Measurement of Hysterisis loss with B-H loop plotting .
12.. Measurement of Ratio and Phase angle error of a Current Transformer.
13.Measurement of frequency and Phase angle using Lissajous figures.
14.Calibration of Energy meter.
15.Extension of meter ranges.

EI- 2210 ELECTRONIC CIRCUITS- LAB

Class: II/IV B.Tech. II Semester

Branch : EEE
Duration of University Examination: 2 Hrs

Practicals : 2 Hrs
University Examination: 50 Marks
Sessionals : 25 Marks

LIST OF EXPERIMENTS
1.

Characteristics of: PN Diode, Zener Diode, SCR, UJT

2.

Static Characteristics of : BJT(CE), FET(CS)

3.

Half wave & Full wave Rectifiers :Without & with Filters .

4.

Zener Diode Voltage Regulator.

5.

BJT Biasing Circuits : Fixed Bias, Collector to Base Bias, Self Bias

6.

BJT Switch , Amplifier .

7.

Emitter Follower.

8.

Cascade Amplifier (Two Stage).

9.

FET Amplifier.

10.

Feedback Amplifiers: Voltage series/shunt; Current series/shunt.

11.

Oscillators: RC, LC & Crystal.

12.

Differential Amplifier.

13.

Class B Power Amplifier.

14.

Single Tuned Amplifier.

SCHEME OF INSTRUCTION AND EVALUATION

I SEMESTER OF III YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME
ELECTRICAL & ELECTRONICS ENGINEERING

Course
No.

Hours of Instruction
Per week

EVALUATION SCHEME

Course
Lectures

HS 311

Management Economics and

Accountancy

EE 313

Electrical Machines -II

EE 314

Power systems-I

EE 319

Control systems Engg..

EC 314

Linear Integrated Circuits

EC 318

Digital Electronics

EE 316

Electrical Machines Lab-I

EC 317

Integrated Circuits Lab

Total

19

Tutorials Practical
1
1
1
1
1
5

External Evaluation
Duration of
Max.
Exam
Marks

Sessionals
Max.
Marks

Total
Marks

100

50

150

100

50

150

100

50

150

100

50

150

100

50

150

100

50

150

50

25

75

50

25

75

1050

HS 311 MANAGEMENT ECONOMICS AND ACCOUNTANCY

Class: III/IV B.Tech. I Semester
Branch: Common to All Branches.
Duration of University Examination: 3 hours
ECONOMICS

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I

Economics: Meaning, Definition, Scope: Micro and Macro, Assumptions and Methods,
Usefulness.
(2 Periods)
Factors of Production: Meaning and Definition. Characteristics of Land Labour, Capital and
Enterpreneurship. Division of Labour : Advantages and Disadvantages. Formation of Capital
Forms of Business Organization: Sole Proprietaryship, Partnership Concern, Cooperative
Societies Joint Stock Company. Types of Partners, Types of Joint Stock Companies. Merits and
Demerits
(6 Periods)
MANAGEMENT

UNIT II

Management: Meaning and Definition. Scope of Management- Principles of Management.

Scientific Management: Definition, Characteristics and Criticism.
(4 Periods)
Functions Of Management: Planning: Definition and Process. Organizing Definition of
Organization: Characteristics andTypes. Principles of Organization. Departmentation: Meaning
and Fundamentals of Departmentation, Centralisation And Decentralization: Definition: Features
Merits and Demerits. Communication: Process of Communication, Channels, Media, and
Barriers.
(10 Periods)
UNIT III
Staffing: Meaning and Functions of Personnel Management. Coordination: Definition, how to
Achieve Effective Coordination. Controlling: Definition and Process.
(4 Periods)
ACCOUNTANCY

UNIT IV

Double Entry Book-Keeping : Definition. Journalization of Transactions. Ledger Posting and

Balancing. Preparation of Trial Balance.
(10periods)
Preparation of Final Accounts: Trading Account, Profit And Loss Account and Balance
sheet(With Simple Adjustments)
(7 Periods)
REFERENCE BOOKS:
1.
2.
3.
4.

Modern Economics Theory By K.K.Dewett.

Principles and Practice of Management By LM.Prasad.
Introduction To Accountancy BY T.S. Grewal.
Business Organization and Management Y.K.Bhushan.

EE 313 ELECTRICAL MACHINES II

Class: III/IV B.Tech. I Semester
Branch: EEE.
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. 3-Phase Induction Motors: Construction details, Types, Production of rotating magnetic
field, Principle of operation, Equivalent circuit, Phasor diagram, torque equation, Slip torque
characteristics, Effects & Change in supply voltage and supply frequency on torque and
speed , Losses and efficiency, Testing, No load and Blocked Rotor test, Determination of
equivalent circuit parameters, Pre determination of performance from equivalent circuit and
circle diagrams
2. Methods of Starting, Direct on line, Star Delta, Autotransformer, Rotor resistance starters.
3. Methods of speed control: Pole changing , Cascading, Variable frequency Variable voltage,
Rotor resistance , Rotor injected emf technique.
4. Double cage induction motor: Construction. Principle & operation, equivalent circuit
characteristics and applications.
(9+3)
UNIT II
5. Synchronous Generators: Construction, Types, Winding factors, Production of emf
Harmonics, Armature reaction Synchronous reactance Phasor diagrams, Load
characteristics OC and SC tests, Methods of predetermination of regulation by synchronous
Impedance(EMF). MMF method, Potier(ZPF) and ASA methods, Simple theory of two
reaction analysis and its application for the pre determination of regulation of alternator, Slip
test, power angle characteristics, Synchronization and synchronizing power, parallel
operation, Load sharing, operation on infinite bus bar, High frequency generation, Typical
applications, short circuit transients in synchronous machines.
(9+3)
UNIT III
6. Synchronous Motors: Principle of operation, Phasor diagrams, variables of current and
power factor with excitation, Hunting and its application, Determination and pre
determination V and curves, excitation circles and pane circles, methods of starting
Synchro condenser, Applications.
(9+3)
UNIT IV
7. Single phase Induction Motors: Principle & operation, Starting methods, Double revolved
fixed theory, Equivalent circuit, Determination equivalent circuit parameters
8. Special purpose machines :Constructional features, principle & working characteristics and
applications of
Stepper motor,Brushless DC motor, Scharage motor, Reluctance motor,
Hystersis motor and Linear Induction motor.
(9+3)
TEXT BOOKS:
1. P.S. Bhimbhra, ELECTRICAL MACHINARY 5/e, Khanna Publishers.
2. P.S. Bhimbhra, GENERALIZED THEORY OF ELECTRICAL MACHINES , Khanna
Publishers.
3. Mukhopadyaya , ELECTRICAL MACHINES.

EE 314 POWER SYSTEMS I

Class: III/IV B.Tech. I Semester

Branch: EEE.
Duration of University Examination: 3 hours

Lectures: 3, Tutorials: 1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Conventional Energy Sources: Hydroelectric Stations: Introduction, arrangement and location
of hydroelectric station Types of hydroelectric plant Principle of working power developed
layout of hydro power station: Steam power plant, Introduction Selection of site coal
handling plant Ash handling Plant Steam generating Plant Steam turbine & Generator
Cooling water systems: Nuclear Power Plant: Introduction to Nuclear reactors Types of
reactors Location of Nuclear power plant; Gas turbine power plant: Introduction lay out of Gas
turbine plant Advantages, Combined cycle plants.
(9+3)
UNIT II
Non Conventional Energy Sources: Tidal Power, Wind Power, Geo Thermal Power, Magento
Hydro Dynamic Power, Solar Power. Economics of Power Generation: Definitions, Connected
load, Maximum demand, Demand factor, Load factor, Diversity factor, Load duration curve,
Number and size of generating units, Base load and peak load plants, cost of Electrical energy,
Fixed cost, Running cost, Tariffs.
(9+3)
UNIT III
Insulators: Types, Potential distribution over a string of suspension insulators, Factors affecting
the distribution of voltage along the string insulators, Methods of equalizing potential string
efficiency, Stringing charts, Testing of insulators. Corona: Critical disruptive voltage, Corona
loss, Line design based on corona, Disadvantage of corona, Radio interference, and Inductive
interference between power and communication lines.
(9+3)
UNIT IV
Distribution Lines: Distribution Systems, D.C. two wire and three wire systems. Single phase
and three phase 3 wire and 4 wire AC systems Comparison of efficiency, Kelvins Law
Economic size of conductor. Transmission Lines: Electrical Power system components
Elementary ideas of layout Resistance and capacitance of transmission lines, single phase; and
3 phase lines with symmetrical and asymmetrical spacing, composite conductors
Transposition, bundled conductors, Effect of earth on capacitance, Mechanical design of
transmission lines. Under Ground cables: Electric stress in a cable-core cable-Grading of
cables-cable capacitance-cable inductance-Dielectric loss and Heating.
(9+3)
TEXT BOOKS:
1. C.L.Wadhwa, Electrical Power Systems. 3/e. New Age International Publishers.
2. C.L.Wadhwa, Generation, Distribution & Utilization Of Electrical Energy. New Age
International Publishers.
3. W.D. Stevenson, Elements Of Power System Analysis. 4/e McGraw Hill International
Publishers.
4. A.T. Starr, Generation, Transmission and Distribution.
5. Syed A Nasar Electric Power Systems McGRAW-HILL
REFERENCE BOOKS:
1. Soni, Gupta, Bhatnagar, ELECTRICAL POWER.Dhanpat rai & sons
2. MV.Deshpande, ELEMENTS OF POWER STATION DESIGN, 3/e Wheelers Publishers.

EE 319 CONTROL SYSTEM ENGINEERING

Class: III/IV B.Tech. I Semester
Lectures:3, Tutorials:1
Branch: EEE, E&I,ECE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
1. Introduction:
( 9+3)
Types of systems, Properties of systems, Linearity, Time-inverience, Stability, Causality.
Open loop control system, Closed loop control system, Effect of Feedback on over all gain,
Stability and Sensitivity.
2. MATHEMATICAL MODES OF PHYSICAL SYSTEMS:
Electrical, Mechanical and Electromechanical systems, Transfer function of physical systems
by Block diagram reduction techniques and signal flow graphs, Drawing a signal flow graph
from a block diagram.
UNIT II
3. CONTROL SYSTEM COMPONENTS:
(9+3)
AC and DC servomotors, Synchros, Tacho generator and Potentiometer.
4. TIME DOMAIN ANALYSIS:
Design specifications, Typical test signals, Time response of first order and of 2nd order
systems, Time domain specifications, Basic control actions like P, PI, PD, PID and derivative
feedback, Steady State error and error constants, Routh Hurwitz Criterion, Concept of root
locus and construction of root loci, Effects of adding poles and zeros.
UNIT III
5. FREQUENCY DOMAIN ANALYSIS:
(9+3)
Frequency response of closed loop systems, Specifications, Correlation between frequency
and time domain specifications, Polar plots, Gain Margin and Phase Margin, Bode plots,
Nyquist stability criterion, Relative stability using Nyquist stability criterion.
UNIT IV
6. STATE VARIABLE ANALYSIS OF CONTINUOUS SYSTEMS:

(9+3)

Concepts of state, State variables and state model, Derivation of state model from transfer
function, Diagonolization, Derivation of transfer function from state model, Solution of state
equations, State transition matrix, Concept of Controllability and Observability.
7. COMPENSATION: Elementary treatment of Compensation.

TEXT BOOKS:
1. M. Gopal, Modern Control System Theory, Wiley Eastern Publishers, New Delhi.
2. B.C. Kuo, Automatic Control Systems 7/e Prentice Hall of India. New Delhi.
3. K.Ogata, Modern Control Engineering Prentice Hall of India, New Delhi.
REFERENCES:
1.

I.J. Nagarth & M. Gopal, Control System Engineering, New Age International Publishers, New Delhi.

EC 314 LINEAR INTEGRATED CIRCUITS

Class: III/IV B.Tech. I Semester

Lectures: 3
Branch: ECE, E&I, EEE
University Examination: 100 marks
Duration of University Examination: 3 Hours
Sessionals: 50 marks
UNIT-I
Integrated circuits: Introduction, classification of Ics, Fabrication Techniques of Ics. Introduction to
OPAMP: Introduction, Internal blocks of Op-Amps, Ideal & Practical characteristics of
OpAmps, Measurement of Op-Amp parameters, Analysis of Basic Inverting & Non-Inverting Amplifiers
and voltage follower.
D.C. Characteristics of OPAMP: Open loop and closed loop frequency response, Op-Amp stability,
Frequency compensation techniques. Ideal & Practical characteristics of IC-741.

UNIT-II
Applications of Operational Amplifiers: Summing and difference amplifiers, Integrator and
differentiator, current to voltage and voltage to current converters, Instrumentation amplifier, sample and
Hold circuit.
Non-Linear Applications: Precision Rectifiers Half wave and full wave, log and antilog amplifiers.
Comparators and wave form generators: OPAMP comparators, Regenerative (Schmitt Trigger), R.C.
phase shift and wiens bridge oscillators, Astable Mulitivibrator (Square wave generator) and Monostable
Multivibrator.

UNIT-III
Active Filters: Introduction of filters, Ideal and Realistic frequency responses of various filters, Second
Order filters: Analysis and design of I.G.M.F., V.C.V.S configuration of L.P.F, H.P.F., B.P.F. and notch
filters.
Monolithic Timers and their applications: Introduction to IC 555 Timer, Functional Diagram, Design
of Astable and Monostable multivibrators using 555timer.

UNIT-IV
Voltage regulators: Basic voltage regulator using Op-Amps, General purpose IC Regulator, uA723,
Functional diagram, specifications, Design consideration of 723 as low & high voltage regulators. Current
limit protection, current feed back, current bossting. Three terminal voltage (fixed) Regulators:
Introduction and general features of three terminal regulators, Ic series of three terminal Regulators, their
Design, current boosting.
Phase Locked Loops: Voltage controlled oscillator, Basic PLL operation, definitions related to PLL,
Monolithic PLL and design considerations, transient response of PLL, typical PLL applications (FSK,
AM detectors)
Analog multiplexers, DAC types (R-2R ladder weighted ladder and Inverted ladder), ADCs types
(Successive Approximation, Dual-Slop, Flash types).
TEXT BOOKS:
1. Roy Choudhary, Shail Jain, Linear Integrated Circuits, New Age International, New Delhi.
2. Ramakant Gayakwad, Opamp and Linear Integrated Circuits, Pearson Education.
3. G.B. Clayton, Integrated Circuits & Applications, ELBS, Lodon.
4. Rodert F.Coughlin, Frederick F.Driscoll, Operational Amplifiers and Linear Integrated Circuits,
Pearson Education, New Delhi.
REFERENCE BOOKS:
1. R.Botkar, Integrated Circuits, Khanna Publishers, New Delhi.
2. Franco, Integrated Circuits & Applications, McGraw Hill, New York.

EC 318 DIGITAL ELECTRONICS

Class: III/IV B.Tech. I Semester
Branch: Common to CSE, IT, EEE)
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Number Systems and Codes : Introduction to Number systems, Base conversion among
different Number Systems, Signed number representation, Binary arithmetic, Use of 1s and 2s
complement representation in Binary Number system Introduction to Codes, Weighted and Non
weighted codes, self complementing and reflecting codes, code conversion, Error detection and
correction, Hamming codes.
Switching functions and minimization: Basic laws of Boolean algebra, logical gates (block
diagram representation), Boolean expressions, SOP and POS forms, realization of Boolean
expressions with logic gates, simplification of Boolean expressions, Karnaugh map methods,
Tabulation method.
(9+3)
UNIT II
Half Adder, Full Adder, Serial Adder, Parallel Adder, Carry look ahead Adder, BCD Adder,
Subtractor, 1s and 2s complement Adder / subtractor.
Decoders, Seven segment LED displays, Encoders, Multiplexers, De MUXs realization of
Boolean expression using MUXs and De MUXs.
(9+3)
UNIT III
Sequential circuits : RS, JK, D and T Flip Flops, use of direct inputs, shift registers,
applications of shift registers, Ring counter, Johnson counter.
Ripple counters Design of Mod-N ripple counters.
Synchronous sequential machines state diagrams, state tables, design of synchronous
sequential machines, design of Mod-N synchronous counters, Design of sequence detectors.
( 9+3)
UNIT IV
Logic Families : Introduction to logic families. Description of the terms Fan in, Fan out,
Noise margin, Propagation delay, current sourcing, current sinking. Study of RTL, DCTL, DTL,
HTL, TTL, ECL, MOS, CMOS families.
( 9+3)
TEXT BOOKS:
1. Zvi. Kohavi, Switching and Finite Automata Theory , Tata McGraw-Hill, New Delhi.
2. Taub & Schilling, Digital Integrated Circuits, Tata McGraw-Hill, New Delhi.
REFERENCE BOOKS:
1. Moris Mano, Digital Logic Design, Prentice Hall of India, New Delhi.
2. Samuel.C.Lee & B.S.Sonde, Digital Circuits & Logic Design, Prentice Hall of India, New
Delhi.
3. R.P. JAIN, Modern Digital Electronics, Prentice Hall of India, New Delhi

EE 316 ELECTRICAL MACHINES I LABORATORY

Class: III/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Practicals:3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Determination of the magnetization characteristics and speed versus voltage curve separately
excited D.C. generators.
2. Determination of the load characteristics of a separately excited D.C. Generator.
3. Determination of the load characteristics of a D.C. shunt generator.
4. Determination of torque speed characteristics of a D.C. shunt motor.
5. Retardation test on a D.C. shunt machine.
6. Determination of the torque speed characteristics of a D.C. Series Motor.
7. Performance characteristics of two identical transformers by conducting back to back test.
(Sumpners test).
8. Performance test on a scot connected transformer.
9. Performance test on a V-connected transformer.
10. Parallel Operation of Transformers.

EC 317

INTEGRATED CIRCUITS LAB

Class: III/IV B.Tech. I Semester

Branch: E&I, EEE, ECE.
Duration of University Examination: 3 hours.

Practicals:3Hrs.
Sessionals : 25 Marks
University Examination : 50 Marks

LIST OF EXPERIMENTS
PART A
1.
2.
3.
4.
5.

Realization of Boolean functions, HALF Adder using NAND/NOR gates.

Bit ripple counter using JK/TFFS.
4 BIT shift register using DFFS
4 Bit Ring and Johnson Counters
Verification of function table of Decade counter IC7490 And displaying O/P using
decaders and D 7 Segment display.
6. (a) design of 4:1 MUX using lo gic gates and verification of its function table
7. (b) Realization of Boolean expressions using 8:1 MUX.
PART B
1. Measurement of OP Amp parameters
(i)
Open Loop gain
(ii)
I/P bias and offset currents
(iii) I/P offset voltage
(iv)
Slew Rate and
(v)
CMRR
2. Design and testing of OP Amp Integrator and Differentiator
3. Design and testing of precision rectifier
4. Design and testing of Astable multivibiator and monostable multivibrator using IC 555
timer
5. Design and testing of wiens Bridge oscillatox for required frequency using IC74

SCHEME OF INSTRUCTION AND EVALUATION

II SEMESTER OF III YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME
ELECTRICAL & ELECTRONICS ENGINEERING

Course
No.

Hours of Instruction
Per week
Course

EVALUATION SCHEME

External Evaluation
Practicals Duration of
Max.
Examhours Marks
3
100

Sessionals
Max.
Marks
50

Total
Marks

Lectures

Tutorials

EE 313

Management Economics and

Accountancy
Electrical Machines -II

100

50

150

EE 314

Power systems-I

100

50

150

EE 319

Control systems Engg..

100

50

150

EC 314

Linear Integrated Circuits

100

50

150

EC 318

Digital Electronics

100

50

150

EE 316

Electrical Machines Lab-I

50

25

75

EC 317

Integrated Circuits Lab

50

25

75

19

HS 311

150

1050

HS 311 MANAGEMENT ECONOMICS AND ACCOUNTANCY

Class: III/IV B.Tech. I Semester
Branch: Common to All Branches.
Duration of University Examination: 3 hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

ECONOMICS
UNIT:I
Economics: Meaning, Definition, Scope: Micro and Macro. Assumptions and Methods.
Usefulness.
(2Periods)
Factors of Production: Meaning and Definition. Characteristics of Land Labour, Capital and Enterpreneurship.
Division of Labour : Advantages and Disadvantages. Formation of Capital Forms of Business Organization: Sole
Proprietaryship, Partnership Concern, Cooperative Societies Joint Stock Company. Types of Partners, Types of Joint
Stock Companies. Merits and Demerits
(6Periods)

MANAGEMENT
UNIT:II
Management: Meaning and Definition. Scope of Management- Principles of Management. Scientific Management:
Definition, Characteristics and Criticism.
(4 Periods)
Functions Of Management: Planning: Definition and Process. Organizing Definition of Organization:
Characteristics andTypes. Principles of Organization. Departmentation: Meaning and Fundamentals of
Departmentation, Centralisation And Decentralization: Definition: Features Merits and Demerits. Communication:
Process of Communication, Channels, Media, and Barriers.
(10 Periods)

UNIT:III
Staffing: Meaning and Functions of Personnel Management. Coordination: Definition, how to Achieve Effective
Coordination. Controlling: Definition and Process.
(4 Periods)

ACCOUNTANCY
UNIT:IV
Double Entry Book-Keeping : Definition. Journalization of Transactions. Ledger Posting and Balancing.
Preparation of Trial Balance.
(10periods)
Preparation of Final Accounts: Trading Account, Profit And Loss Account and Balance sheet(With Simple
Adjustments)
( 7 Periods)
Reference Books:
1.
2.

Modern Economics Theory By K.K.Dewett.

Principles and Practice of Management By LM.Prasad.

3.
4.

Introduction To Accountancy BY T.S. Grewal.

Business Organization and Management Y.K.Bhushan.

EE 313 ELECTRICAL MACHINES II

Class: III/IV B.Tech. I Semester
Branch: EEE
.
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. 3-Phase Induction Motors: Construction details, Types, Production of rotating magnetic
field, Principle of operation, Equivalent circuit, Phasor diagram, torque equation, Slip torque
characteristics, Effects & Change in supply voltage and supply frequency on torque and
speed , Losses and efficiency, Testing, No load and Blocked Rotor test, Determination of
equivalent circuit parameters, Pre determination of performance from equivalent circuit and
circle diagrams
2. Methods of Starting, Direct on line, Star Delta, Autotransformer, Rotor resistance starters.
3. Methods of speed control: Pole changing , Cascading, Variable frequency Variable voltage,
Rotor resistance , Rotor injected emf technique.
4. Double cage induction motor: Construction. Principle & operation, equivalent circuit
characteristics and applications.
(9+3)
UNIT II
5. Synchronous Generators: Construction, Types, Winding factors, Production of emf
Harmonics, Armature reaction Synchronous reactance Phasor diagrams, Load
characteristics OC and SC tests, Methods of predetermination of regulation by synchronous
Impedance(EMF). MMF method, Potier(ZPF) and ASA methods, Simple theory of two
reaction analysis and its application for the pre determination of regulation of alternator, Slip
test, power angle characteristics, Synchronization and synchronizing power, parallel
operation, Load sharing, operation on infinite bus bar, High frequency generation, Typical
applications, short circuit transients in synchronous machines.
(9+3)
UNIT III
6. Synchronous Motors: Principle of operation, Phasor diagrams, variables of current and
power factor with excitation, Hunting and its application, Determination and pre
determination V and curves, excitation circles and pane circles, methods of starting
Synchro condenser, Applications.
(9+3)
UNIT IV
7. Single phase Induction Motors: Principle & operation, Starting methods, Double revolved
fixed theory, Equivalent circuit, Determination equivalent circuit parameters
8. Special purpose machines :Constructional features, principle & working characteristics and
applications of
Stepper motor,Brushless DC motor,Scharage motor,Reluctance

motor,Hystersis motor and Linear Induction motor

(9+3)

TEXT BOOKS:
1. P.S. Bhimbhra, ELECTRICAL MACHINARY 5/e, Khanna Publishers.
2. P.S. Bhimbhra, GENERALIZED THEORY OF ELECTRICAL MACHINES , Khanna
Publishers.
3. Mukhopadyaya , ELECTRICAL MACHINES.

EE 314 POWER SYSTEMS I

Class: III/IV B.Tech. I Semester
Branch: EEE
.
Duration of University Examination: 3 hours

Lectures: 3, Tutorials: 1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Conventional Energy Sources: Hydroelectric Stations: Introduction, arrangement and
location of hydroelectric station Types of hydroelectric plant Principle of working
power developed layout of hydro power station: Steam power plant, Introduction
Selection of site coal handling plant Ash handling Plant Steam generating Plant
Steam turbine & Generator Cooling water systems: Nuclear Power Plant: Introduction to
Nuclear reactors Types of reactors Location of Nuclear power plant; Gas turbine power
plant: Introduction lay out of Gas turbine plant Advantages, Combined cycle plants.
(9+3)
UNIT II
2. Non Conventional Energy Sources: Tidal Power, Wind Power, Geo Thermal Power,
Magento Hydro Dynamic Power, Solar Power.

3. Economics of Power Generation: Definitions, Connected load, Maximum demand, Demand

factor, Load factor, Diversity factor, Load duration curve, Number and size of generating
units, Base load and peak load plants, cost of Electrical energy, Fixed cost, Running cost,
Tariffs.
(9+3)
UNIT III

4. Insulators: Types, Potential distribution over a string of suspension insulators, Factors

affecting the distribution of voltage along the string insulators, Methods of equalizing
potential string efficiency, Stringing charts, Testing of insulators.
5. Corona: Critical disruptive voltage, Corona loss, Line design based on corona, Disadvantage
of corona, Radio interference, and Inductive interference between power and communication
lines.
(9+3)
UNIT IV

6. Distribution Lines: Distribution Systems, D.C. two wire and three wire systems. Single
phase and three phase 3 wire and 4 wire AC systems Comparison of efficiency, Kelvins
Law Economic size of conductor.
7. Transmission Lines: Electrical Power system components Elementary ideas of layout
Resistance and capacitance of transmission lines, single phase; and 3 phase lines with
symmetrical and asymmetrical spacing, composite conductors Transposition, bundled
conductors, Effect of earth on capacitance, Mechanical design of transmission lines.

8. Under Ground cables: Electric stress in a cable-core cable-Grading of cables-cable

capacitance-cable inductance-Dielectric loss and Heating
`
(9+3)

TEXT BOOKS :
1. C.L.Wadhwa, ELECTRICAL POWER SYSTEMS. 3/e. New Age International
Publishers.
2. C.L.Wadhwa, GENERATION, DISTRIBUTION & UTILIZATION OF ELECTRICAL
ENERGY. New Age International Publishers.
3. W.D. Stevenson, ELEMENTS OF POWER SYSTEM ANALYSIS. 4/e McGraw Hill
International Publishers.
4. A.T. Starr, GENERATION, TRANSMISSION and DISTRIBUTION.
5. SYED A NASAR ELECTRIC POWER SYSTEMS McGRAW-HILL
REFERENCE BOOKS:
1. Soni, Gupta, Bhatnagar, ELECTRICAL POWER.Dhanpat rai & sons
2. MV.Deshpande, ELEMENTS OF POWER STATION DESIGN, 3/e Wheelers Publishers.

EE 319 CONTROL SYSTEM ENGINEERING

Class: III/IV B.Tech. I Semester
Branch: EEE, E&I,ECE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1.

INTRODUCTION:
( 9+3)
Types of systems, Properties of systems, Linearity, Time-inverience, Stability, Causality. Open loop control
system, Closed loop control system, Effect of Feedback on over all gain, Stability and Sensitivity.

2.

MATHEMATICAL MODES OF PHYSICAL SYSTEMS:

Electrical, Mechanical and Electromechanical systems, Transfer function of physical systems by Block diagram
reduction techniques and signal flow graphs, Drawing a signal flow graph from a block diagram.

UNIT II
3.

CONTROL SYSTEM COMPONENTS:

AC and DC servomotors, Synchros, Tacho generator and Potentiometer.

(9+3)

4.

TIME DOMAIN ANALYSIS:

Design specifications, Typical test signals, Time response of first order and of 2nd order systems, Time domain
specifications, Basic control actions like P, PI, PD, PID and derivative feedback, Steady State error and error
constants, Routh Hurwitz Criterion, Concept of root locus and construction of root loci, Effects of adding poles
and zeros.

UNIT III
5.

FREQUENCY DOMAIN ANALYSIS:

(9+3)
Frequency response of closed loop systems, Specifications, Correlation between frequency and time domain
specifications, Polar plots, Gain Margin and Phase Margin, Bode plots, Nyquist stability criterion, Relative
stability using Nyquist stability criterion

UNIT IV
6.

STATE VARIABLE ANALYSIS OF CONTINUOUS SYSTEMS:

(9+3)

Concepts of state, State variables and state model, Derivation of state model from transfer
function, Diagonolization, Derivation of transfer function from state model, Solution of state equations,
State transition matrix, Concept of Controllability and Observability.
7.

COMPENSATION:

Elementary treatment of Compensation.

TEXT BOOKS
1. M. Gopal, Modern Control System Theory, Wiley Eastern Publishers, New Delhi.
2. B.C. Kuo, Automatic Control Systems 7/e Prentice Hall of India. New Delhi.
3. K.Ogata, Modern Control Engineering Prentice Hall of India, New Delhi.
REFERENCES
1.

I.J. Nagarth & M. Gopal, Control System Engineering, New Age International Publishers, New Delhi.

EC 314 LINEAR INTEGRATED CIRCUITS

Class:III/IV B.Tech. I Semester
Branch: ECE, E&I, EEE
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT-I
Integrated circuits: Introduction, classification of Ics, Fabrication Techniques of Ics. Introduction to
OPAMP: Introduction, Internal blocks of Op-Amps, Ideal & Practical characteristics of
OpAmps, Measurement of Op-Amp parameters, Analysis of Basic Inverting & Non-Inverting Amplifiers
and voltage follower.
D.C. Characteristics of OPAMP: Open loop and closed loop frequency response, Op-Amp stability,
Frequency compensation techniques. Ideal & Practical characteristics of IC-741.
UNIT-II
Applications of Operational Amplifiers: Summing and difference amplifiers, Integrator and
differentiator, current to voltage and voltage to current converters, Instrumentation amplifier, sample and
Hold circuit.
Non-Linear Applications: Precision Rectifiers Half wave and full wave, log and antilog amplifiers.
Comparators and wave form generators: OPAMP comparators, Regenerative (Schmitt Trigger), R.C.
phase shift and wiens bridge oscillators, Astable Mulitivibrator (Square wave generator) and Monostable
Multivibrator.
UNIT-III
Active Filters: Introduction of filters, Ideal and Realistic frequency responses of various filters, Second
Order filters: Analysis and design of I.G.M.F., V.C.V.S configuration of L.P.F, H.P.F., B.P.F. and notch
filters.
Monolithic Timers and their applications: Introduction to IC 555 Timer, Functional Diagram, Design
of Astable and Monostable multivibrators using 555timer.
UNIT-IV
Voltage regulators: Basic voltage regulator using Op-Amps, General purpose IC Regulator, uA723,
Functional diagram, specifications, Design consideration of 723 as low & high voltage regulators. Current
limit protection, current feed back, current bossting. Three terminal voltage (fixed) Regulators:
Introduction and general features of three terminal regulators, Ic series of three terminal Regulators, their
Design, current boosting.
Phase Locked Loops: Voltage controlled oscillator, Basic PLL operation, definitions related to PLL,
Monolithic PLL and design considerations, transient response of PLL, typical PLL applications (FSK,
AM detectors)
Analog multiplexers, DAC types (R-2R ladder weighted ladder and Inverted ladder), ADCs types
(Successive Approximation, Dual-Slop, Flash types).
TEXT BOOKS:
1. Roy Choudhary, Shail Jain, Linear Integrated Circuits, New Age International, New Delhi.
2. Ramakant Gayakwad, Opamp and Linear Integrated Circuits, Pearson Education.
3. G.B. Clayton, Integrated Circuits & Applications, ELBS, Lodon.
4. Rodert F.Coughlin, Frederick F.Driscoll, Operational Amplifiers and Linear Integrated Circuits,
Pearson Education, New Delhi.
REFERENCE BOOKS:
1. R.Botkar, Integrated Circuits, Khanna Publishers, New Delhi.
2. Franco, Integrated Circuits & Applications, McGraw Hill, New York.

EC 318 DIGITAL ELECTRONICS

Class:III/IV B.Tech. I Semester
Branch: Common to CSE, IT, EEE)
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Number Systems and Codes : Introduction to Number systems, Base conversion among different Number
Systems, Signed number representation, Binary arithmetic, Use of 1s and 2s complement representation in Binary
Number system
Introduction to Codes, Weighted and Non weighted codes, self complementing and reflecting codes, code
conversion, Error detection and correction, Hamming codes.

Switching functions and minimization:

Basic laws of Boolean algebra, logical gates (block diagram representation), Boolean expressions, SOP and POS
forms, realization of Boolean expressions with logic gates, simplification of Boolean expressions, Karnaugh map
methods, Tabulation method.

(9+3)

UNIT II
Half Adder, Full Adder, Serial Adder, Parallel Adder, Carry look ahead Adder, BCD Adder, Subtractor, 1s and 2s
complement Adder / subtractor.
Decoders, Seven segment LED displays, Encoders, Multiplexers, De MUXs realization of Boolean expression
using MUXs and De MUXs.

( 9+3)

UNIT III
Sequential circuits : RS, JK, D and T Flip Flops, use of direct inputs, shift registers, applications of shift registers,
Ring counter, Johnson counter.
Ripple counters Design of Mod-N ripple counters.
Synchronous sequential machines state diagrams, state tables, design of synchronous sequential machines,
design of Mod-N synchronous counters, Design of sequence detectors
( 9+3)

UNIT IV
Logic Families : Introduction to logic families. Description of the terms Fan in, Fan out, Noise margin,
Propagation delay, current sourcing, current sinking.
Study of RTL, DCTL, DTL, HTL, TTL, ECL, MOS, CMOS families.

TEXT BOOKS:
1.

Zvi. Kohavi, Switching and Finite Automata Theory , Tata McGraw-Hill, New Delhi.

2.

Taub & Schilling, Digital Integrated Circuits, Tata McGraw-Hill, New Delhi.

( 9+3)

REFERENCE BOOKS:
1. Moris Mano, Digital Logic Design, Prentice Hall of India, New Delhi.
2. Samuel.C.Lee & B.S.Sonde, Digital Circuits & Logic Design, Prentice Hall of India, New Delhi.
3. R.P. JAIN, Modern Digital Electronics, Prentice Hall of India, New Delhi

EE 316 ELECTRICAL MACHINES I LABORATORY

Class: III/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Practicals:3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Determination of the magnetisation characteristics and speed versus voltage curve a
separately excited D.C. generators.
2. Determination of the load characteristics of a separately excited D.C. Generator.
3. Determination of the load characteristics of a D.C. shunt generator.
4. Determination of torque speed characteristics of a D.C. shunt motor.
5. Retardation test on a D.C. shunt machine.
6. Determination of the torque speed characteristics of a D.C. Series Motor.
7. Performance characteristics of two identical transformers by conducting back to back test.
(Sumpners test).
8. Performance test on a scot connected transformer.
9. Performance test on a V-connected transformer.
10. Parallel Operation of Transformers.

EC 317

INTEGRATED CIRCUITS LAB

Class: III/IV B.Tech. I Semester

Branch: E&I, EEE, ECE.
Duration of University Examination: 3 hours.

Practicals:3Hrs.
Sessionals : 25 Marks
University Examination : 50 Marks

LIST OF EXPERIMENTS

PART A
1.
2.
3.
4.
5.
6.
7.

Realization of Boolean functions, HALF Adder using NAND/NOR gates.

Bit ripple counter using JK/TFFS.
4 BIT shift register using DFFS
4 Bit Ring and Johnson Counters
Verification of function table of Decade counter IC7490 And displaying O/P using decaders and D 7
Segment display.
(a) design of 4:1 MUX using lo gic gates and verification of its function table
(b) Realization of Boolean expressions using 8:1 MUX.

PART B
1.

Measurement of OP Amp parameters

(i)
Open Loop gain
(ii)
I/P bias and offset currents
(iii)
I/P offset voltage
(iv)
Slew Rate and
(v)
CMRR

2.
3.
4.
5.

Design and testing of OP Amp Integrator and Differentiator

Design and testing of precision rectifier
Design and testing of Astable multivibiator and monostable multivibrator using IC 555 timer
Design and testing of wiens Bridge oscillatox for required frequency using IC74

KAKATIYA UNIVERSITY:: WARANGAL

SCHEME OF INSTRUCTION AND EVALUATION

II SEMESTER OF III / IV B.TECH(EEE). DEGREE PROGRAMME

Course
No.

Course

ELECTRICAL AND ELECTRONICS ENGINEERING

Hours of Instruction
EVALUATION SCHEME
Per week
External Evaluation Sessionals
Lectures Tutorials Practicals Duration of
Max.
Max. Marks
Examhours Marks
3
1
3
100
50

Total
Marks

OE 321

Open Elective

EI 322

Power Electronics

100

50

150

EE 324

Power Systems-II

100

50

150

EC 326

Digital Signal Processing

100

50

150

EI 323

Micro Processor and Micro

Controllers
Electrical Machines Lab-II

100

50

150

50

25

75

Micro Processor and Micro

Controllers Lab
Control Systems Lab

50

25

75

50

25

75

EE 327
EI 328
EE 329

18
Open Electives:

OE 321 A. Operations Research

OE 321 B. Management Information Systems
OE 321 C. Entrepreneurship Development
OE 321 D. Forex & Foreign Trade

150

1125

OE 321 (A) OPERATIONS RESEARCH

Course: B.Tech. III/IV II Semester
Branch : Common to all branches
External Examination: 3 Hours
Internal Examination: 2 Hours

Theory: 3 periods/week
External Evaluation: 100
Internal Evaluation: 50

UNIT-I
(9)
Linear Programming: Mathematical Model, assumptions of linear programming, principles
of simplex method. Applications. Duality, Dual simplex method, revised simplex method.
UNIT-II
(9)
Non-linear Programming: Unconstrained Optimization techniques, Random search methods,
Decent methods, Steepest Decent method, variable metric method. Constrained optimization
techniques. Cutting plane method.
UNIT-III
(9)
Dynamic programming: Introduction, Multistage decision process, linear programming as a
case of dynamic programming. Computational procedures in dynamic programming.
Special type of linear programming: Special type of linear programming problems Transportation problems - balanced and unbalanced transportation, time transportation problem.
Assignment problem - special case of transportation.
UNIT-IV
(9)
Queuing Theory: Description of Queuing Models and applicability. Birth and Death Processes,
Single server models with Poisson input and exponential service. Multiple service queuing
models.
SUGGESTED TEXT / REFERENCE BOOKS:
1.
2.
3.
4.
5.
6.
7.

Handy.A.Taha, "Operation Research" 4th Edn, McMillan, 1984.

Kanthiswaroop, etal, Opertions Research, S.Chand & Sons, New Delhi.
V.K.Kapoor, "Operation Research" 5th Revd.Edn. S.Chand & sons,1990
J.C.Pant, Introduction Optimization, Jain Brothers, New Delhi.
S.S.Rao, Optimization Techniques, New Age International, New Delhi.
G.Hadley, Linear Programming, Addison Wesley, New Delhi.
Gillett, Introduction to Operations Research, Mc.Graw Hill New,Delhi

OE 321 (B) MANAGEMENT INFORMATION SYSTEMS

Course: III/IV B.Tech II Semester
Branch: Common to all branches
External Examination: 3 Hours
Internal Examination: 2 Hours

Theory: 3 Periods/week
External Evaluation:100
Internal Evaluation: 50
UNITI

(9)

Management Information Systems (MIS): MIS Concept, Definition, Role and Impact of MIS,
MIS and Computer, MIS and Academics, MIS and the User.
Role and Importance of Management: Introduction and Approaches to Management,
Functions of Manager, Managers and the Environment, Management as a Control System,
Management by Exception, MIS A Support to the Management.
Process of Management: Management Effectiveness, Planning, Organizing, Staffing,
Coordinating and Directing, Controlling, MIS A Tool for the Management Process.
Organization Structure and Theory: Basic Model of Organization Structure, Modifications to
the Basic Model of Organization Structure, Organizational Behavior, Organization as a
System, MIS Organization.
Strategic Management of Business: The Concept of Corporate Planning, Essentiality of
Strategic Planning, Development of the Business Strategies, Short Range Planning, Tools of
Planning, MIS Business Planning.
UNIT-II
(9)
Decision Making: Decision Making Concepts, Decision Methods, Tools and Procedures,
Behavioral Concepts in Decision Making, Organizational Decision Making, MIS and Decision
Making Concepts.
Information: Information Concepts, Information A Quality Product, Classification of the
Information, Methods of Data and Information Collection, Value of the Information, General
Model of a Human as an Information Processor, Summary of Information Concepts and their
Implications, Organization and Information, MIS and the Information Concepts.
Systems: Systems Concepts, Systems Control, Types of System, Handling System Complexity,
Post Implementation Problems in a System, MIS and System Concepts.
System Analysis and Design: Introduction, The Need for System Analysis, System Analysis of
the Existing System, System Analysis of a New Requirement, System Development Model,
Structured System Analysis and Design (SSAD), computer System Design, MIS and System
Analysis.
UNIT-III
(9)
Development of MIS: Development of Long Range Plans of the MIS, Ascertaining the Class of
Information, Determining the Information Requirement, Development and Implementation of the
MIS, Management of Quality in the MIS, Organization for Development of the MIS, MIS: The
Factors of Success and Failure.
Choice of Information Technology: Introduction: Nature of IT Decision, Strategic Decision,
Configuration Design, Evaluation, Information Technology Implementation Plan, Choice of the
Information Technology and the Management Information System.
Applications in Manufacturing Sector: Introduction, Personnel Management, Financial
Management, Production Management, Materials Management, Marketing Management,

Corporate Overview.
Applications in Service Sector: Introduction to the Service Sector, Creating a Distinctive
Service, MIS Applications in Service Industry, MIS: Service Industry.
UNIT-IV
(9)
Decision Support Systems: Concept and Philosophy, DSS: Deterministic Systems, Artificial
Intelligence (AI) System, Knowledge Based Expert System (KBES), MIS and the Role of DSS.
Technology of Information Systems: Introduction, Data Processing, Transaction Processing,
Application Processing, Information System Processing, TQM of Information Systems, Human
Factors and User Interface, Real Time Systems and Design, Programming Languages for System
coding, CASE Tools.
Business Process Re-engineering (BPR): Introduction, Business Process, Process Model of
Organisation, Value Stream Model of Organization, Business Process Delays, Relevance of the
Information Technology, MIS and BPR.
Overview of Database Management Systems, Object Oriented Technologies, Client-Server
Architecture, Networks.
Case Studies in MIS.
SUGGESTED TEXT / REFERENCE BOOKS:
1. W.S.Jawadekar, Management Information Systems, Tata McGraw Hill, 2nd Edition,
ISBN: 0 07 044575 - 3, 2003.
2. Robert Schultheis, Mary Sumner, Management Information Systems The Managers
View, Fourth Edition, Tata McGraw Hill, ISBN: 0 07 463879 3, 2003.
3. Robert G.Murdick, Joel E.Ross, James R.Clagget, Information Systems for Modern
Management, Third Edition, Prentice Hall of India, ISBN: 81 203 0397 0, 2002.
4. Gordon B.Davis, Margrethe H.Olson, Management Information Systems, Second
Edition, Tata McGraw Hill, ISBN: 0 07 040267 1, 2000.
5. Jerome Kanter, Managing with Information, Fourth Edition, Prentice Hall of India,
ISBN: 81 203 1012 8, 2003.

OE 321(C) ENTREPRENEURSHIP DEVELOPMENT

Course: III/IV B.Tech II Semester
Branch: Common to all branches
External Examination: 3 Hours
Internal Examination: 2 Hours

Theory: 3 Periods/week
External Evaluation: 100
Internal Evaluation: 50
UNIT-I

(9)

Entrepreneurship: definition, Significance of Entrepreneurship. Role of Entrepreneurship in

development advantages and limitations characteristics of a person to become an entrepreneur,
human factor in Entrepreneurship, Motivation, Leadership qualities and the essential skills of
communication etc., Role of women entrepreneurship, Agencies dealing with entrepreneurship
and small scale Industries. Case studies of successful entrepreneurs. Identification of a variable
business opportunity, Various methods.
Activity: Inputs from DIC, SFC, IIC & Nationalized Banks.
UNIT-II

(9)

Business opportunity selection, Opportunities in various branches of Engineering. Sources of

new ideas, New product, Service and Trade etc. Planning and Launching of an entrepreneurial
activity. Screening, Feasibility studies and market survey. Forecasting the demand. Technical
feasibility, Financial viability. Break even analysis. Preparation of preliminary and bankable
project reports planning infrastructure, Raw materials and human resource, requirements, fiscal
incentives. An introduction to patents process, Trade marks etc.
Activity: Visit to a small scale industry.
UNIT-III

(9)

Project planning: Product planning and development process, Definition of a project,

Sequential steps in executing the project, principles of layouts, Types of layouts, Factors
influencing layouts. choosing an optimum layout suitable to the venture. Tenders, Call for
quotations, Purchase orders, Procurement and installation of machinery and equipment, Utilities
etc. Fundamentals of Production Management, PPC-Concepts, Functions, Long & short run
problems. Marketing Management: Definition, Functions and Segments. Financial Management:
Objectives & Functions
Activity: Interaction with Entrepreneurs in the field.
UNIT-IV

(9)

Personal and Human resource management: Introduction, Definitions, Importance, Factors

effecting Major functions of enterprise management. Selection, recruitment, training, placement,
development, performance appraisal systems. Legal issues in Entrepreneurship, Intellectual
property rights, Issues in setting up the organization.
Activity: Preparation of project report for variable business venture

SUGGESTED TEXT / REFERENCE BOOKS:

1. Robert D.Hisrich, Michael P. Peters, Entrepreneurship, Fifth Edition, Tata McGraw-Hill,
2002.
2. David H. Holt, Entrepreneurship New venture creation prentice hall of India.
3. Handbook for New Entrepreneurs, Entrepreneurship Development Institute of India,
Ahmedabad.
4. T.R. Banga, Project Planning and Entrepreneurship Development, CBS Publishers, New
Delhi.
5. Personnel efficiency in Entrepreneurship Development-A Practical Guide to Industrial
Entrepreneurs, S. Chand & Co., New Delhi.

OE 321 (D) FOREX AND FOREIGN TRADE

Course: III/IV B.Tech. II Semester
Branch: Common to all Branches
External Examination: 3 Hours
Internal Examination: 2 Hours

Theory: 3 Periods/week
External Evaluation: 100
Internal Evaluation: 50

UNIT-I
Business: Nature and Scope. Classification of Business Activities. Functions of Commerce &
Trade. Business System: Characteristics and Components of Business System. Objectives of
Business: Concept, Significance and Classification of Objectives. Objections against Profit
Maximization Objective
(9)
UNIT-II
Foreign Trade: Introduction of International Trade: Basic of External Trade. Special Problems
of Foreign Trade.
Stages In Import Procedure. Stages In Export Procedure. Bill of Lading, Mates Receipt,
Certificate of Origin. State Trading Corporation of India. Export Credit and Guarantee
Corporation. Minerals and Metals Trading Corporation of India.
(9)
UNIT-III
Foreign Exchange: Meaning and Importance of Exchange Rate. Methods of Foreign Payments.
The Demand And Supply of Foreign Exchange. The Equilibrium Rate of Foreign Exchange.
Functions of Foreign Exchange Market. Determination of Foreign Exchange Rate Under
Different Monetary Systems: Mint Policy Theory, Balance of Payment Theory.
(9)
UNIT-IV
Objectives of Exchange Control: Characteristics Advantages of Exchange Control Methods
of Exchange Controls. Intervention, Exchange Restriction; Multiple Exchange Rates; Exchange
Clearing Agreements Method of Operation Exchange Clearing Agreements In Practice.
Payments Agreements Transfer Moratoria Indirect Methods. Progress Towards Evaluation.
Opposition To Exchange Control.
(9)
SUGGESTED TEXT / REFERENCE BOOKS:
1. Macro Economics by M.L.Seth Lakshmi Narayan Agarwal, Hospital Road, AGRA 3.
2. Money Banking, Trade & Finance by K.P.M. Sundaram Sultan Chand And Sons, 23,
Daryaganj, New Delhi -110 002.
3. Monetary Theory by M.C. Vaish, Ratan Prakashan Mandir, Educational & University
Publishers, 21, Dayanand Marg Darya Ganj, Delhi 2.
4. Business Organization and Modern Management By Y.K.Bhushan
5. Business Organization and Management by S.A. Sherlekhar.
6. Macro Economics by P.N.Chopra. Kalyani Pubnlishers, 1/1, Rajinder Nagar, Ludhiana141 008.
7. Business Organization & Management by C.B.Gupta Sultan And Sons Publishers, 23.
Daryaganj, New Delhi 110 002.

EE 322 POWER ELECTRONICS

Class: III/IV B.Tech. II Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Characteristics of Power Devices: Introduction of power semi conductor devices like SCR,
DIAC, TRAIC, GTO, MOSFET, UJT, IGBT and their characteristics. Two transistor modes
of SCR, protection of SCR against over voltages, over current and voltage and current
transients.
2. Gate Triggering circuits, Resistance, Resistance capacitance Trigger circuits, UJT as
relaxation oscillator, series and parallel operation of SCRs, String efficiency, Different
methods of forced communication Techniques.
9+3
UNIT II
3. Phase controlled Rectifiers: Phase Angle control Single phase three phase, halfwave, full
wave, Half controlled and Fully controlled with and without free wheeling diodes for
resistive and inductive loads, effect of source inductance, Dual converters, Power factor
improvements.
9+3
UNIT III
4. Choppers: Basic circuit, step-up step-down, classification of choppers on the basis of
various quadrants, chopper commutation, Jones and Morgan chopper.
5. Inverters: Series inverter, parallel inverter, voltage source inverters, and current source
inverters, 1-phase and 3-Phase bridge inverters.
9+3
UNIT IV
6. AC Voltage Controllers: Single Phase AC Controllers with R and RL loads, Three Phase
AC Voltage Controllers with Star and Delta connected loads.
Cyclo converters: Principle and operation of Single phase to single phase, single phase to 3phase, 3-phase to 1-phase Cyclo converters.
7. Industrial Applications: Battery charger, Uninterruptible power supply, Switched mode
power supply.
9+3
TEXT BOOK:
1. M.D. Singh & K.B. Kanchandani, Power Electronics, Tata McGraw Hill, New Delhi.
2. M.H. Rashid, Power Electronics, Prentice Hall of India, New Delhi.
3. P.S. Bhimbra, Power Electronics, Khanna Publishers, New Delhi.
4. Vedam Subramanium, Power Electronics.
REFERENCE BOOKS:
1. P.C. Sen, Power Electronics, Tata McGraw Hill, New Delhi.

EE 324 POWER SYSTEMS II

Class: III/IV B.Tech. II Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Performance of transmission line: Representation of transmission lines, Short transmission
lines, Medium length lines, Nominal T and representation, Long transmission lines,
Equivalent circuit representation of a long line; A,B,C,D constants, long lines, series
(Tandam) and parallel networks, skin effect, proximity effect and Ferranti effect, Suge
impedance loading, Power flow through transmission lines, Power circle diagrams. (9+3)
UNIT II
2. Voltage control: Introduction, Methods of voltage control, Shunt, series compensation, tap
changing transformers, Booster transformers, Synchronous phase modifiers, Determination
of their capacities, analytical methods.
3. Representation of Power systems: Single line diagram, Impedance and reactance diagrams,
per unit quantities, advantages of per unit systems.
(9+3)
UNIT III
4. Symmetrical Components and fault calculations: Significance of positive, negative, zero
sequence components, Average 3-phase power in terms of symmetrical components.
Sequence impedances and sequence networks for fault calculations, single line to ground
(LG) fault, LL fault, LLG fault, LLLG fault, reactors and their location, short circuit capacity
of a bus.
(9+3)
UNIT IV
5. Traveling waves on transmission line: Production of travelling waves, open circuited line,
short circuited line, Line terminated through a resistance, line connected to a cable, reflection
and refraction coefficients at a T-junction, Line terminated through a capacitance, attenuators
of travelling waves.
6. System Neutral grounding and insulation Co-ordination: Introduction, ungrounded
neutral system, arcing grounds. Advantages of neutral grounding .Methods of neutral
grounding solid grounding, reactance grounding, Peterson coil grounding. Grounding
transformer, choice of grounding, insulation co-ordination volt-time curves.
(9+3)
TEXT BOOKS:
1. Wadhwa, C.L. ELECTRICAL POWER SYSTEMS Wiley Eastern Ltd. New Delhi. 1991
2. Stevenson W.D. ELEMENTS OF POWER SYSTEM ANALYSIS 4/e McGraw Hill
International Publishers.
3. H.Cotton,Barbor, TRANSMISSION and DISTRIBUTION of ELECTRIC ENERGY
REFERENCE BOOK:
1. Sony, Gupta, Bhatnagar, ELECTRIC POWER Dhanpat Rai & Sons.
2. 2.THE Miller Reactive power control in Electric systemsby John wiley &sons
3. 3.Modern power system Analysis-by I.J.Nagarath & D.P.Kothari Tata Mcgraw-hill
publishing company.

EC 326 DIGITAL SIGNAL PROCESSING

Class:III/IV B.Tech. IISemester
Branch: ECE, E&I, EEE
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT-I
Basic Elements of Digital Signal Processing, Discrete Time Fourier Transform (DTFT):
Definition of DTFT, Properties of DTFT, Magnitude and phase transfer function, steady state
response of LTI System to a sinusoidal input,
Discrete Fourier Transform (DFT): Definition of DFT, Properties of DFT, Inverse Discrete
Fourier Transform (IDFT), Relation between DTFT, DFT and z-transform.
Fast Fourier Transform (FFT): Computational Complexity of DFT, Introduction to FFT,
Radix-2 FFT Algorithms, Decimation-in-time FFT Algorithm, Decimation-in-Frequency FFT
algorithm,
UNIT-II
Infinite Impulse Response (IIR) Filters: Reliability of Ideal Filter, Introduction to IIR Filters,
Methods of converting analog transfer function H(s) to its digital equivalent, Necessity of Filter
Approximation, IIR Digital filter design using Butterworth Approximation, IIR Digital Filter
Design using chebyshev approximation, comparison of Butterworth and Chebyshev filters.
UNIT-III
Finite Impulse Response (FIR) Filters: Introduction to FIR filters, Inherent stability of FIR
filters, Linear phase in FIR filters, Design of linear phase FIR filters using windows, Rectangular
window, Triangular window, Hamming window, Hanning window and Kaiser window. Design
of Linear phase FIR filter using frequency sampling method. Comparison of IIR and FIR filters.
UNIT-IV
DSP Architecture: Introduction to Programmable Digital Signal Processors; MAC, Bus
structures and memory access schemes, multiported memory, multiple access memory, VLIW
architecture, Pipelining, addressing modes, on-chip peripherals.
Architecture of TMS320C5X: Introduction, Bus Structure, Central Arithmetic Logic unit,
registers, flags, on-chip memory and peripherals, assembly language instructions.
TEXT BOOKS:
1. John G.Proakis & D.G.Manolakis, Digital Signal Processing: Principles, Algorithms and
Applications (PHI)
2. A.V.Oppenheim & R.W.Schafer, Discrete-Time Signal Processing (Pearson education,
PHI)
3. Digital Signal Processors B.Venkataramani, M. Bhaskar TMH.
REFERENCE BOOKS:
1. Sanjit K.Mitra, Digital Signal Processing A Computer Based Approach (TMH)
2. Lyons, Understanding DSP (Pearson Education)
3. Adreas Antanio, Digital filter Analysis and Design (TMH)
4. L.R. Rabiner & Bearnard Gold, Theory and Applications of Digital Signal
Processing.(PHI).

EI 323 MICROPROCESSORS & MICRCONTROLLERS

Class:III/IV B.Tech. II Semester
Branch: ECE, E&I, EEE
Duration of University Examination: 3 Hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Evolution of Microprocessors, 8085 MPU Architecture, Concept of Memory Segmentation.
8086 Family Architecture: Organization of 8086 CPU, Segments registers, physical and logical
addressing, Instruction set, Addressing Modes.
(9+3)
UNIT II
Assembly Language Programming: Assembler directives, simple Programming of 8086
Implementation of structures If Then, If-Then-else, while do, repeauntil time delays, strings,
procedures, macros, pin configuration, Min/Max modes, timing diagrams.
(8+3)
UNIT III
Interfacing with 8086: ADC, DAC interfacing, Interfacing of switches, Keyboards, LEDs,
Stepper motor; CRT interface, interfacing through devices like 8255, 8257 and 8253.
Interrupts & Priority interrupt controller 8259.
(9+3)
UNIT IV
8051 Microcontroller: Architecture, Instruction set, addressing modes, Assembly language
Programming timers, I/o Ports, interrupts, serial ports, interfacing with LEDS Switches &
Stepper Motor. Real Time Clock.
(10+3)
TEXTBOOKS:
1. D.V.Hall, Microprocessors & Interfacing, Tata McGraw Hill, New Delhi.
2. Yuchangliu, Glen A.Gibson, Microcomputer Systems. The 8086/8088 family, architecture,
programming and design, Prentice Hall of India, New Delhi.
3. Muhammed Ali Mazidi, The 8051 Microcontrollers and Embedded systems, Pearson, New
Delhi.
REFERENCE BOOKS:
1. Kennet Ayala, 8086 Microprocessor: Programming & Interfacing with PC, Penram
Publications, Bombay.
2. Brey, Advanced Microprocessors, Prentice Hall of India, New Delhi.
3. Kennet Ayala, The Microcontroller Architecture, Programming and Applications,
Penram Publications, Bombay.

EE 327 ELECTRICAL MACHINES II LABORATORY

Class: III/IV B.Tech. II Semester
Branch: EEE
Duration of University Examination: 3 hours

Practicals:3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Pre Determination of Voltage regulation of an alternator by synchronous impedance method
and magneto-motive force method.
2. Pre Determination of Voltage regulation of an alternator by zero power factor method.
3. Determination of direct and quadrature axis of synchronous reactance of a synchronous
machine.
4. Load test on an alternator.
5. Load sharing by two alternators running in parallel.
6. Determination V curves of a synchronous motor.
7. Performance characteristics of a single phase induction motor.
8. Performance characteristics of a stepper motor.
9. Speed Control of induction motor by pole changing method
10.Pre Determination of the performance characteristics of 3-phase induction Motor.
11. Speed Control of a slip-ring induction motor by rotor impedance control ( Ward Leonard
Control Method)
12. Performance characteristics of a squirrel cage induction motor at different frequencies.

EI 328 MICROPROCESSORS & MICROCONTROLLERS LAB

Class:III/IV B.Tech. II Semester
Branch: ECE, E&I, EEE
Duration of University Examination: 3 Hours

Practicals: 3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
Assembly Language Programming on 8086 Microprocessor
1. Study of 8086 kits
2. Finding Sum, Average, Multiplication.
3. Sorting (a) Ascending (b) Descending.
4. Transfer of bytes from DS to ES
5. Code Conversions (i) BCD to Binary (ii) Binary to BCD (iii) Binary to ASCII
6. String Comparison
7. Generation of time Delays counters
Interfacing with 8086
8. Wave form Generation using DAC modules (i) Square wave (ii) Sawtooth (iii) Triangular.
9. Stepper Motor interfacing
10. ADC interfacing
11. LED/LCD interfacing.
12. Traffic Controller
ALP on 8031/51 Micro Controllers.
13. Study of Micro Controller kits, Assembly Language Programming
14. Multiplication, Division
15. Sorting
16. Code Conversion
17. Time delays Counters
18. Stepper motor, LED, switches interfacing.
TEXT BOOKS:
1. D.V.Hall, Microprocessors & Interfacing, Tata McGraw Hill, New Delhi.

EE 329 CONTROL SYSTEM LABORATORY

Class: III /IV B.Tech. II Semester
Branch: E.E.E.
Duration of University Exam: 3 Hrs.

Practicals: 3 Hrs
University Exam: 50 Marks
Sessionals: 25 Marks

LIST OF EXPERIMENTS
1. Study of speed-torque characteristics of d.c servomotor.
2. Study of speed-torque characteristics of 2- a.c servomotor.
3. Study of pid controller.
4. Closed loop &open loop control of 3- induction motor.
5. Study of synchro transmitter and receiver
6. Study of lead-lag network unit.
7. Closed loop&open loop control of d.c motor
8. Study of second order system response.
9. State space model for classical transfer
10. Function using matlab package
11. Obtaining the root locus and bode plots using matlab package

SCHEME OF INSTRUCTION AND EVALUATION

I SEMESTER OF IV YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME
ELECTRICAL & ELECTRONICS ENGINEERING
Hours of Instruction Per week
Course
No.

Course

Lectures

Tutorials

Drawing/
Practical

Scheme of Evaluation

Total
External Evaluation Sessionals Marks
Duration of Max.
Max.
Exam
Marks
Marks
3 Hrs
100
50
150

EE 411

Power System Operation and Control

EE 412

Utilization of Electrical Energy

3 Hrs

100

50

150

EE 413

Power Semi Conductor Drives

3 Hrs

100

50

150

EE 414

Professional Elective - I

3 Hrs

100

50

150

EE 415

Switch Gear & Protection

3 Hrs

100

50

150

EE 416

Power Electronics & Drives Lab

3 Hrs

50

25

75

EE417

Digital Simulation Lab

3 Hrs

50

25

75

EE-418

Project Work

50

50

3
15

Professional Elective I:
EE-414(A) - Neural Networks & Fuzzy Logic
EE-414(B) High Voltage Engineering
EE-414(C) Unified Theory of Electrical Machines
EE-414(D) -- FACTS
EE-414(E) Advanced Control Systems

950

EE 411 POWER SYSTEM OPERATION AND CONTROL

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Load flow studies: Introduction,Bus classification,Nodal admittance matrix, Load flow
equations, Interactive methods Gauss, Gauss seidel and Newton Raphson methods. Newton
decoupled and Fast decoupled. Merits and Demerits of these methods, system data for load
flow study.
(9+3)
UNIT II
2. P - Q Control: Effect of Synchronous machine excitation, Power angle of synchronous
machines, Specifications of Voltages, capacitor banks, control by transformers, Introduction
to static VAR compensators.
3. Economic Operation of Power Systems: Distribution of load between units with in a plant,
transmission loss as a function of plant generation, calculation of loss coefficients,
distribution of load between plants.
Unit commitment- Introduction , constraints in unit
commitment problems.
(9+3)
UNIT III
4. Load Frequency control: Introduction, Load frequency problem, Megawatt frequency (or PF) control channel, Megavar voltage (or Q V) control channel. Dynamic interaction
between P-F and Q-V loops, Mathematical model of speed governing system, turbine models
division of power system into control areas, P-F control of single control area ( the
uncontrolled and controlled cases) P-F control of two area systems (the uncontrolled and
controlled cases).
(9+3)
UNIT IV
5. Power System Stability: The stability problem, steady state stability limit,Expression using
ABCD parameters, steadt state stability of synchronous machine. transient stability, swing
equation, equal area criterian of stability and its further applications, step by step solution
swing equatioin, some factors affecting transient stability
& Methods of improving
stability . Concept of Dynamic stability effect of excitation on generator power limits.
TEXT BOOKS:
1. W.D. Stevenson, ELEMENTS OF POWER SYSTEMS ANALYSIS.TMH
2. Olle I Elgerd, ELECTRIC ENERGY SYSTEM THEORY Tata McGraw Hill
Publishers.
3. Peter.W.Sauer & M.A.Pai Power System Dynamics & stability.Pearson. edu
4. E.W.Kimbark Power system stability vol-1&III .John wiley & sons edition.
5. P.M. Anderson , A.A..Found power system control & stability Galgortia publications,
vol-I edition.
6. Economic operation of power systems by L.K.Kirchmayer wiley Eastern ltd.
REFERENCE BOOKS:
1. C.L.Wadhwa, ELECTRICAL POWER SYSTEMS.Khanna Publishers
2. Generation operation and control of power system by Allen wood & Woolen berg.TMH

EE 412 UTILIZATION OF ELECTRICAL ENERGY

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Electric Traction: Systems of electric traction, Transmission of drive, Mechanics of train
movement, Speed-time curves, Effect of speed, Acceleration and distance and schedule, Power
and energy output from driving axles, Specific energy output, series-parallel method of speed
control, shunt-bridge transition, collection of current, third rail over head wires, part two graph
collections, different types of electric braking, reverse current, rheostat and regenerative braking,
counter current braking of AC and DC motors.
(9+3)
UNIT II
Industrial Utilization: Introduction, Factors governing selection of Electric Motors, Nature of
electric supply, Types of drives, Nature of loads, Standard Ratings of Motors, Choice of ratings
of Motors, Types of Motors used in industrial Drives, Motors for particular service.
(9+3)
UNIT III
Electric Heating: Elementary principle of heat transfer, Stefans law, electric furnaces,
Resistance furnace, design of heating, losses and efficiency construction and working of
different types of induction furnaces Dielectric heating Arc furnaces, control equipment.
Welding: Types of welding, Resistance, Gas and Arc welding, Characteristics of Carson and
metallic Are welding, Comparison (Excluding electronics controls)
(9+3)
UNIT IV
Illumination: Introduction, Laws of Illumination, Light production by excitation, Gas discharge
lamps, Fluorescent lamps, ultra violet lamps, Arc lamps, Filament lamps, Polar curves, Effect of
voltage variation, Basic principles of Light control, Types and design of Lighting schemes,
lighting calculations, flood lighting and street lighting, Factory lighting.
Power factor correction: Introduction, Disadvantages of a low Power factor, Causes of low
power factor, Power factor improvement, Power factor correction by Static Capacitors,
Economics of PF improvement, Most economical Power factor when K W demand is constant,
Most economical Power factor when KVA demand is constant.
(9+3)
TEXT BOOKS:
1. E.Openshaw Taylor, UTILIZATION OF ELECTRIC ENERGY Orient Longman
2. H.Partab, UTILIZATION OF ELECTRICAL ENERGY Dhanpat Rai & Sons.
3. J.B.Gupta A COURSE IN ELECTRIC POWER S.K.Kataria &Sons
REFERENCE BOOKS:
1. T.Starr,GENERAL TRANSMISSION & UTILIZATION
2. C.L.Wadhwa, GENERATION,UTILIZATION and DISTRIBUTION of ELECTRICAL
ENERGY New age International Publishers.
3. Soni Gupta Bhatnagar, A COURSE IN ELECTRICAL POWER Dhanpat Rai & Sons.
4. B.L.Theraja & A.K.Theraja TRANSMISSION,DISTRIBUTION & UTILIZATION
S.Chand.

EE 413 POWER SEMICONDUCTOR DRIVES

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Fundamentals of Electric Drives: Electric Drives, advantages of electric drives, parts of
electric drives, choice of electric drives, status of D.C. drives and A.C. drives.starting,
Braking,speedcontrol of AC and DC motors
2. Dynamics of Electric drives: Fundamental torque equations, types of load, Quadrant
diagram of speed-Torque characteristics, Dynamics of load torque combinality, steady state
stability and Transient stability of an Electric drives. Load equalization. Calculation of time
and energy loss in Transient operation, Drive specifications.
(9+3)
UNIT II
Control of D.C. Drives
3. Rectifier control of dc drives: Controlled rectifier circuits, braking operation of rectifier
controlled separately excited dc motor, single phase and three phase half and fully controlled
rectifier fed separately excited dc motor ,multi quadrant operation of fully controlled
rectifier fed separately excited dc motor.
4. Chopper control of dc drives : chopper control of separately excited and series dc motors ,
multi quadrant control of chopper fed motors
(9+3)
UNIT III
Control of Induction Motor Drives
5. AC Voltage Controllers: control of induction motor by AC voltage controllers.
6. Frequency controlled Induction motor drives: control of Induction motor by Voltage
Source Inverter (VSI), Current Source Inverter (CSI), Current controlled PWM inverters and
cyclo converters.
7. Slip power controlled wound-rotor induction motor drives: static rotor resistance
control, static scherbius drives, krammer drives.
(9+3)
UNIT IV
Control of Synchronous Motor Drives
8. Operation of cylindrical rotor synchronous motor from VSI and CSI, self controlled
Synchronous Motor Drives using cyclo converters.
(9+3)
TEXT BOOKS:
1. G.K. Dubey, Fundamentals of Electrical Drives, Narosa Publishers, New Delhi. 1988
2. N.K. De and P.K. Sen, Electrical Drives, Prentice Hall of India, New Delhi. 1999
3. G.K. Dubey, Power Semiconductor Drives, Narosa Publishers, New
Delhi. 1988
REFERENCE BOOKS:
1. Vedam Subrahmanyam, Thyristor Control of Electrical Drives, Tata McGraw Hill, New
Delhi. 1988.
2. B.K. Bose Modern Power Electronics & A.C Drives.Pearson .edu
3. P.S.Bimbhra Power Electronics Khanna publishers.

EE414(A) NEURAL NETWORKS & FUZZY LOGIC

Class: IV/IV B.Tech. I Semester

Lectures:3
Branch: EEE
University Examination:100marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
Biological Neural Networks: Neuron Physiology, Neuronal Diversity, Specifications of the
brain, They Eyes Neural Network.
Concepts of Artificial Neural Networks: Neural Attributes, Modeling, Basic Model of Neuron,
Learning in Artificial Neural Networks, Characteristics of ANNs, ANN Parameters, ANN
Topologies, ANN adaptability, The stability Plasticity Dilemma.
9
UNIT II
Neural Network Paradigms: McCulloch Pitts Model, The perception, ADALINE and
MADALINE Models, Winner Takes All Learning algorithm, Back-propagation Learning
Algorithm, Cerebellum Model Articulation Controller (CMAC), Adaptive Resonance Theory
(ART) paradigm, Hopfield Model, Competitive Learning Model, Memory Type paradigm,
Linear Associative Memory, Real Time Models, Linear Vector Quantization, Self-organizing
Map, Probabilistic Neural Network, Radial Basis function, Time-Delay Neural Net, Congnitron
and Neo congnitron Models, Simulated Annealing, Boltzmann Machine.
9
UNIT III
Fuzzy Logic: Propositional Logic, The Membership function, Fuzzy logic, Fuzzy Rule
Generation, Defuzzification of Fuzzy Logic, Time Dependent Fuzzy Logic, Crisp logics,
Temporal Fuzzy logic (TFL), Time Invariant Membership function, Time-variant Membership
function, Intervals, Semilarge Intervals, Interval operators, Temporal Fuzzy logic syntax,
Applying Temporal Fuzzy operators, Defuzzification of Temporal Fuzzy logic, Applicability of
TFL in communication systems
9
UNIT IV
Fuzzy Neural Networks: Fuzzy Artificial Neural Network (FANN), Fuzzy Neural Example,
Neuro-Fuzzy control, Traditional control, Neural control, Fuzzy control, Fuzzy Neural control.
Applications: Signal Processing, Image Data Processing, Hand written characteristics
Recognition, Visual Image Recognition, Communication systems, Call processing, Switching,
Traffic control Intelligent control, Optimization techniques.
9
TEXT BOOK:
1. Stamatios V. Kartalopoulos, Understanding Neural Networks & Fuzzy Logic, Prentice Hall
of Inida, (IEEE Press), New Delhi.
2. Simon Haykin Neural Networks a Comprehensive foundation. Pearson .edu
REFERENCE BOOKS:
1. Hassoun, Fundamentals of Artificial Neural Networks, Prentice Hall of India,
New Delhi.
2. Anderson, Introduction to Neural Networks, Prentice Hall of India, New Delhi.
3. Kosko, Neural Networks and Fuzzy Systems, Prentice Hall of India, New Delhi

EE 414(B) HIGH VOLTAGE ENGINEERING

(EE 414 Professional Elective I)
Class: IV/IV B.Tech. I Semester
Branch: EEE.
Duration of University Examination: 3 hours

Lectures:3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Breakdown Mechanism of Solids and Liquids: Introduction, Intrinsic Breakdown, Electro
Mechanical Breakdown, Thermal Breakdown, Breakdown of Solid dielectrics in practice,
Chemical and Electro Chemical Deterioration and Breakdown, Breakdown due to Treeing
and Tracking, Breakdown due to Internal discharges, Breakdown in composite dielectrics,
2. Break down of liquids as Insulators, Pure Liquids and commercial liquids, Conduction and
Breakdown in commercial liquids Suspended particle theory, cavitation and the Bubble
theory, Thermal mechanism of the Breakdown, Stressed volume theory.
3. Mechanism of Breakdown of Gases, Townsends First Ionization coefficient, Cathode
processor, Secondary effects, Townsends Second Ionization coefficient, Townsends
Breakdown Mechanism, Experimental Determination of coefficients and Breakdown in
Electronegative Gases, Steamer or Kanal Mechanism of Breakdown, Paschens Law,
Penning Effect, Breakdown in Non uniform fields and Corona Discharges, Time Lag,
Practical considerations in using Gases for Insulation purposes, Vacuum Insulation.
(9)
UNIT II
4. Generation of High D.C.&A.C, Voltages and Currents: Halfwave rectifier circuit, Voltage
doubler circuits, Cockroft-Walton Voltage multiplier circuit, Electrostatic Generator,
VandeGraff Generator, Generation of High AC voltages, Cascaded Transformers, Resonant
Transformer, Generation of High frequency AC High voltages, Generation of Rectangular
current pulses, Tripping control of Impulse Generator.
5. Definition of Impulse currents & voltages: Impulse voltage Generator circuits any two
type, Marxs multi stage voltage generator,tripping control of impulse voltage
generator,Generation of switching surges,definition of impulse current wave forms,impulse
current generator,
(9)
UNIT III
6. Measurement of High Voltage DC, AC and Impulse Currents & Voltages: Measurement
of High D.C. voltages High ohm series Resistance, Resistance potential Divider, R-C
capacitive voltage divider, Generating Voltmeter
7. Series capacitance voltmeter, CVT, Electrostatic voltmeters, Peak reading a.c. voltmeters
(Chubb Fortescue method) Spharical Measurements (Spherical gaps) for High D.C. and
AC voltages, Impulse voltage, Measurement of High AC, D.C. and Impulse currents, Hall
Generators for D.C. current Measurements, Resistive shunts, Bipolar Strip shunt, Coaxial
Tubular shunt, Squirrel cage shunts, C.R.O. for Impulsive voltage and current Measurements.
(9)

UNIT IV
8. High Voltage Testing Techniques: Principle of Insulation co-ordination on H.V. and EHV
Power System, Power frequency and Impulse Testing of Isolators, Bushings, Cables and
Transformer, Testing of Insulators and circuit breakers, Testing of Surge Divertor.
(9)
TEXT BOOKS:
1. M.S.Naidu, V.Kamaraju, HIGH VOLTAGE ENGINEERING Tata McGraw Hill
2. C.L. Wadhwa, HIGH VOLTAGE ENGINEERING, New Age International.
REFERENCE BOOKS:
1. Kuffel & Abdulla, HIGH VOLTAGE ENGINEERING
2. Zangel & Kuffel, HIGH VOLTAGE ENGINEERING

EE 414(C) UNIFIED THOERY OF ELECTRICAL MACHINES

(EE 414 Professional Elective I)
Class: IV/IV B.Tech. I Semester
Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
1. Theory of Transformation: Basic Machine, Conventional, the basic two pole machine,
voltage and torque equation of the basic electrical machine, Vector and matrix power, Matrix
form of performance equation, Concept of equivalance of mmf invariance of power, Active
linear transformation, Orthogonality, Passive transformations, Concept of equivalent circuit
and vector diagram.
(9+3)
UNIT II
2. Phase Transformation of 3-Phase Induction Motor: Reference phase transformation of
induction motor, stator reference frame, , equations in state variable from.
3. Phase Transformation of Synchronous Motor: Reference phase transformation of
synchronous motor, rotor reference frame, Equations in State variable form.
(9+3)
UNIT III
4. DC Machines: Mathematicl model for DC seperately excited motor, DC series motor, DC
copound motor, Transferfunction approach for these motors.
(9+3)
UNIT IV
5. 1- Phase Commutated motors, series motors, repulsion motor, 1-Phase motors.
6. Steady State balance operation induction motor voltage equation , equivalent circuit, steady
state torque analysis, symmetrical component transformation and application to induction
motor, un balnced operation.
(9+3)
TEXT BOOKS:
1. P.C. Krause, ANALYSIS OF ELECTRICAL DRIVES, Tata McGraw Hill, New Delhi.
2. P.S. Bhinbra, GENERALIZED CIRCUIT THEOTY OF ELECTRICAL MACHINES
3. Vedam Subramaniam, THYRISTOR CONTROL OF ELECTRIC DRIVES
REFERENCE BOOKS:
1. AdKINS, GENERALISED MACHINE THEORY
2. Kimbark, POWER SYSTEM STABILITY VOL-III.

EE 414 (D) FLEXIBLE AC TRANSMISSION SYSTEMS

Class: IV / IV B.Tech. I Semester
Lectures:3,
Branch: EEE .
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
POWER TRANSMISSION CONTROL:
Introduction, Fundamentals of ac power
transmission, Transmission problems and needs, FACTS controllers, FACTS control
considerations, Basic functions of power electronics, Power semiconductor devices for high
power converters, Static power converters, AC controlled-based structures
(9)
UNIT II
SHUNT COMPENSATION: SVC AND STATCOM:- Introduction, STATCOM
configuration, control, applications. Introduction, Principles of operation, configuration and
control of SVC.
(9)
UNIT III

SERIES COMPENSATION: Intriduction, principles of operation, applications of TCSC for

damping of electromechanical oscillations. Applications of TCSC, TCSC Layout and protection,
Principles of operation of SSSC.
(9)
UNIT IV

PHASE SHIFTER: Introduction, principles of operation of a phase shifter, applications.

UNIFIED POWER FLOW CONTROLLER:-Introduction, Basic operating principles and
characteristics, control and dynamic performance`.
(9)

TEXT BOOKS:
1. Flexible AC Transmission Systems, IEE Power and Energy Series.
2. Understanding Facts Concepts, HINGORANI, NARAIN G, IEEE PRESS.

EE 414E ADVANCED CONTROL SYSTEMS

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Controllability and observability: Tests for continuous time systems for controllability and
observability-time varying case, minimum energy control, time invariant case, principle of
duality, controllability and observability from Jordan canonical form and other canonical forms.
Stability: Stability in the sense of Lyapunov.Lyapunovs stability and Lyapunovs instability
theorems. Direct method of Lyapunov for the linear continuous time autonomous systems.
UNIT II
Model control: Effect of state feedback on controllability and observability. Pole placement by
feedback. Full order observer and reduced order observer. Deadbeat control by state feedback.
Deadbeat observers.
UNIT III
Optimum control: Formulation of optimal control problem, Minimum time, Minimum energy,
and Minimum fuel problems. State regulator problem. Output regulator problem. Tracking
problem.
Calculus of variations approach: Minimization of functionals of single function. Constrained
minimization. Minimum principle. Control variable inequality constraints. Control and state
variable inequality constraints.
UNIT IV
Dynamic programming: Multistage decision process in discrete time principle of causality.
Principle of invariant imbedding. Principle of optimality. Multistage decision process in
continuous time. Computation of optimal control policy in discrete time control systems with
state and control quantization.
TEXT BOOKS:
1. Modern Control System Theory-by M.Gopal, New, New age International
Publishers, 2nd edition, 1996.
2. Distributed Computer Control Systems by S.S.Lamba and V.P.Singh.
REFERENCE BOOKS:
1. Modern control engineering by K.Ogata, PHI, 3rd edition, 1998.
2. Digital Control and State Variable Methods by M.Gopal, TMH, 1997.

EE 415 SWITCH GEAR & PROTECTION

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
1. Switch Gear and Circuit Breakers: Introduction, principle of circuit Interruption, short
circuit studies in power systems, circuit breakers, types and characteristics, circuit breaker
rating, Restriking voltage, transient, characteristics of restriking voltage, circuit breaker
operating mechanism, Air-break, circuit breakers, oil circuit breakers, Air-blast circuit
breaker, Vacuum circuit breakers, SF6 circuit breakers Modification of circuit breaker duty
by shunt resistors, HVDC circuit breaking, Design of circuit breakers, Testing of circuit
breakers, Selection of circuit breaker, Types of switch gear, AC indoor switch gear, Medium
voltage a.c. switch gear, medium voltage AC H.R.C. fuses applications.
(9+3)

UNIT II
2. Protection Relays: Basic ideas of relay protection, Need for protection relaying in power
systems, Basic requirements of protective relaying. Principles and characteristics of
protective relaying, Classification of relays, Theory of application of relays, principal types
of Electro magnetic relays, Theory of Induction relay torque, General equations of
Comparators, over current relays, Instantaneous over current relay, Directional relays,
Distance relays, differential relay.
(9+3)

UNIT III
3. Static Relays: Basis for Static relay development, classification of static relays, basic
components of static relay, comparators, Amplitude comparators, Phase comparators. Coincidence type phase comparator, Over current relay, differential protection, and static
distance protection.
(9+3)

UNIT IV
4. Protection: Protection of transmission line with distance relays, over current and differential
relays, Unit protection of transmission, Bus protection, Generation protection with
differential relays, Earth fault relays, Miscellaneous faults and protection. Transformer
protection with differential relays, earth fault relays, Buchlog relay.Horngaps, surge
divertors, Rod gaps, Ground rods, Ground wires.
(9+3)
TEXT BOOKS:
1. Badhri Ram, SWITCHGEAR & PROTECTION New Age International Ltd. New Delhi.
2. C.L. Wadhwa, POWER SYSTEM ANALYSIS
3. B.R. Gupta , POWER SYSTEM ANALYSIS
REFERENCE BOOKS:

1. Ravindranath & Chander, SWITCH GEAR & PROTECTION Wiley Easter Ltd.
2. Sunil S.Rao SWITCH GEAR & PROTECTION S.Chand & Co., New Delhi.

EE 416 POWER ELECTRONICS & DRIVES LABORATORY

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Practicals:3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Determination of static characteristics of a SCR, MOSFET, IGBT.
2. Determination of characteristics of UJT, Design of UJT oscillator circuit and UJT
verification of its properties.
3. Determination of Edc and Idc of half wave and full wave rectifiers with R and RL loads.
4. Performance of a single-phase inverter circuit and its verification.
5. Design of a SCR circuit for DC motor control.
6. Performance of a chopper circuit.
7. Determination of speed torque characteristics of DC servo motor.
8. Determination of transient and frequency response of a D.C. servo system.
9. Determination of transient and frequency response of an A.C. servo system.
10. Measurement of transfer function using TFA.
11. Determination of speed torque characteristics of AC servo meter
12. Performance of 1-Phase voltage controllers for R and RL loads.

EE 417 DIGITAL SIMULATION LABORATORY

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 Hrs

Practicals:3Hrs.
Sessionals : 25 Marks
University Examination: 50 Marks

LIST OF EXPERIMENTS
(Experiments are to be conducted in the areas of POWER SYSTEMS, POWER ELECTRONIC
CIRCUITS & MACHINES using Software like MATLAB, VHDL / View Logic, PSPICE/
PSIM/ MIPOWER etc.)
POWER SYSTEMS:
1. SIMULATION OF
1 .1
1.2
1.3.
1.4.
1.5.

Load flow analysis

Short Circuit Study
Transient stability
Relay Co-Ordination
Long term Demand forecast.

POWER ELECTRONICS:
2. SIMULATION OF
2.1 Motor Drive Module for adjustable drives & Motion Control
2.2 Digital Control Module for Z-domain Digital Control System.
2.3 Simcoupler Module for Co-Simulation with MAT LAB/Simulink.
PSPICE:
3. SIMULATION OF :
3.1 RC, RL, RLC Circuit
3.2 Rectifiers
3.1 Half wave
3.2 Full wave
3.3 Simulation of 1- inverter circuits.
3.4 Simulation of step up & step down choppers.
MATLAB:
4.

SIMULATION OF :
4.1 Simulation of PI,PID,PID Controllers
4.2 Load frequency Control
4.3 Frequency Response
4.4 Pole Zero Plots

SCHEME OF INSTRUCTION AND EVALUATION

II SEMESTER OF IV YEAR OF 4-YEAR B.TECH. DEGREE PROGRAMME
ELECTRICAL & ELECTRONICS ENGINEERING
Hours of Instruction
Per week
Course
No.

Course

Scheme of Evaluation

Lectures

Tutorials

Drawing/
Practical

External Evaluation

Sessionals

Duration of
Exam

Max.
Marks

Max.
Marks

Total
Marks

EE 411

Power System Operation and Control

3 Hrs

100

50

150

EE 412

Utilization of Electrical Energy

3 Hrs

100

50

150

EE 413

Power Semi Conductor Drives

3 Hrs

100

50

150

EE 414

Professional Elective - I

3 Hrs

100

50

150

EE 415

Switch Gear & Protection

3 Hrs

100

50

150

EE 416

Power Electronics & Drives Lab

3 Hrs

50

25

75

EE 417

Digital Simulation Lab

3 Hrs

50

25

75

EE 418

Project Work

50

50

3
Total

15

Professional Elective I:
EE-414(A) - Neural Networks & Fuzzy Logic
EE-414(B) High Voltage Engineering
EE-414(C) Unified Theory of Electrical Machines
EE-414(D) -- FACTS
EE-414(E) Advanced Control Systems

950

EE 411 POWER SYSTEM OPERATION AND CONTROL

Class: IV/IV B.Tech. I Semester
Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
1. Load flow studies: Introduction,Bus classification,Nodal admittance matrix, Load flow
equations, Interactive methods Gauss, Gauss seidel and Newton Raphson methods. Newton
decoupled and Fast decoupled. Merits and Demerits of these methods, system data for load
flow study.
(9+3)
UNIT II
2. P - Q Control: Effect of Synchronous machine excitation, Power angle of synchronous
machines, Specifications of Voltages, capacitor banks, control by transformers, Introduction
to static VAR compensators.
3. Economic Operation of Power Systems: Distribution of load between units with in a plant,
transmission loss as a function of plant generation, calculation of loss coefficients,
distribution of load between plants. Unit commitment-Introduction, constraints in unit
commitment problems.
(9+3)
UNIT III
4. Load Frequency control: Introduction, Load frequency problem, Megawatt frequency (or PF) control channel, Megavar voltage (or Q V) control channel. Dynamic interaction
between P-F and Q-V loops, Mathematical model of speed governing system, turbine models
division of power system into control areas, P-F control of single control area ( the
uncontrolled and controlled cases) P-F control of two area systems (the uncontrolled and
controlled cases).
(9)
UNIT IV
5. Power System Stability: The stability problem, steady state stability limit,Expression using
ABCD parameters, steadt state stability of synchronous machine. transient stability, swing
equation, equal area criterian of stability and its further applications, step by step solution
swing equatioin, some factors affecting transient stability
& Methods of improving
stability . Concept of Dynamic stability effect of excitation on generator power limits.
TEXT BOOKS:
1. W.D. Stevenson, ELEMENTS OF POWER SYSTEMS ANALYSIS.TMH
2. Olle I Elgerd, ELECTRIC ENERGY SYSTEM THEORY Tata McGraw Hill Publishers.
3. Peter.W.Sauer & M.A.Pai Power System Dynamics & stability.Pearson. edu
4. E.W.Kimbark Power system stability vol-1&III .John wiley & sons edition.
5. P.M. Anderson , A.A..Found power system control & stability Galgortia publications, vol-I
edition.
6. Economic operation of power systems by L.K.Kirchmayer wiley Eastern ltd.
REFERENCE BOOKS:
1. C.L.Wadhwa, ELECTRICAL POWER SYSTEMS.Khanna Publishers
2. Generation operation and control of power system by Allen wood & Woolen berg.TMH

EE 412 UTILIZATION OF ELECTRICAL ENERGY

Class: IV/IV B.Tech. I Semester

Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
Electric Traction: Systems of electric traction, Transmission of drive, Mechanics of train
movement, Speed-time curves, Effect of speed, Acceleration and distance and schedule, Power
and energy output from driving axles, Specific energy output, series-parallel method of speed
control, shunt-bridge transition, collection of current, third rail over head wires, part two graph
collections, different types of electric braking, reverse current, rheostat and regenerative braking,
counter current braking of AC and DC motors.
(9+3)
UNIT II
Industrial Utilization: Introduction, Factors governing selection of Electric Motors, Nature of
electric supply, Types of drives, Nature of loads, Standard Ratings of Motors, Choice of ratings
of Motors, Types of Motors used in industrial Drives, Motors for particular service.
(9+3)
UNIT III
Electric Heating: Elementary principle of heat transfer, Stefans law, electric furnaces,
Resistance furnace, design of heating, losses and efficiency construction and working of
different types of induction furnaces Dielectric heating Arc furnaces, control equipment.
Welding: Types of welding, Resistance, Gas and Arc welding, Characteristics of Carson and
metallic Are welding, Comparison (Excluding electronics controls)
(9+3)
UNIT IV
Illumination: Introduction, Laws of Illumination, Light production by excitation, Gas discharge
lamps, Fluorescent lamps, ultra violet lamps, Arc lamps, Filament lamps, Polar curves, Effect of
voltage variation, Basic principles of Light control, Types and design of Lighting schemes,
lighting calculations, flood lighting and street lighting, Factory lighting.
Power factor correction: Introduction, Disadvantages of a low Power factor, Causes of low
power factor, Power factor improvement, Power factor correction by Static Capacitors,
Economics of PF improvement, Most economical Power factor when K W demand is constant,
Most economical Power factor when KVA demand is constant.
(9+3)
TEXT BOOKS:
1.
2.
3.

E.Openshaw Taylor, UTILIZATION OF ELECTRIC ENERGY Orient Longman

H.Partab, UTILIZATION OF ELECTRICAL ENERGY Dhanpat Rai & Sons.
J.B.Gupta A COURSE IN ELECTRIC POWER S.K.Kataria &Sons

REFERENCE BOOKS:
1. T.Starr,GENERAL TRANSMISSION & UTILIZATION
2. C.L.Wadhwa, Generation, Utilization and Distribution of Electrical Energy New age
International Publishers.
3. Soni Gupta Bhatnagar, A Course In Electrical Power Dhanpat Rai & Sons.
4. B.L.Theraja & A.K.Theraja Transmission,Distribution & Utilization S.Chand.

EE 413 POWER SEMICONDUCTOR DRIVES

Class: IV/IV B.Tech. I Semester
Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
Fundamentals of Electric Drives: Electric Drives, advantages of electric drives, parts of electric
drives, choice of electric drives, status of D.C. drives and A.C. drives.starting,
Braking,speedcontrol of AC and DC motors
Dynamics of Electric drives: Fundamental torque equations, types of load, Quadrant diagram of
speed-Torque characteristics, Dynamics of load torque combinality, steady state stability and
Transient stability of an Electric drives. Load equalization. Calculation of time and energy loss in
Transient operation, Drive specifications.
(9+3)
UNIT II
Control of D.C. Drives
Rectifier control of dc drives: Controlled rectifier circuits, braking operation of rectifier
controlled separately excited dc motor, single phase and three phase half and fully controlled
rectifier fed separately excited dc motor ,multi quadrant operation of fully controlled rectifier
fed separately excited dc motor.
Chopper control of dc drives : chopper control of separately excited and series dc motors ,
multi quadrant control of chopper fed motors
(9+3)
UNIT III
Control of Induction Motor Drives
AC Voltage Controllers: control of induction motor by AC voltage controllers.
Frequency controlled Induction motor drives: control of Induction motor by Voltage Source
Inverter (VSI), Current Source Inverter (CSI), Current controlled PWM inverters and cyclo
converters.
Slip power controlled wound-rotor induction motor drives: static rotor resistance control,
static scherbius drives, krammer drives.
(9+3)
UNIT IV
Control of Synchronous Motor Drives
Operation of cylindrical rotor synchronous motor from VSI and CSI, self controlled
Synchronous Motor Drives using cyclo converters.
(9+3)
TEXT BOOKS:
1. G.K. Dubey, Fundamentals of Electrical Drives, Narosa Publishers, NewDelhi. 1988.
2. N.K. De and P.K. Sen, Electrical Drives, Prentice Hall of India, NewDelhi. 1999
3. G.K. Dubey, Power Semiconductor Drives, Narosa Publishers, NewDelhi. 1988.
REFERENCE BOOKS:
1. Vedam Subrahmanyam, Thyristor Control of Electrical Drives, Tata McGraw Hill, New
Delhi. 1988.
2. B.K. Bose Modern Power Electronics & A.C Drives.Pearson .edu
3. 3.P.S.Bimbhra POWER ELECTRONICS Khanna publishers.

EE414A NEURAL NETWORKS & FUZZY LOGIC

Class: IV/IV B.Tech. I Semester
Lectures:3
Branch: EEE
University Examination:100marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
Biological Neural Networks: Neuron Physiology, Neuronal Diversity, Specifications of the
brain, They Eyes Neural Network.
Concepts of Artificial Neural Networks: Neural Attributes, Modeling, Basic Model of Neuron,
Learning in Artificial Neural Networks, Characteristics of ANNs, ANN Parameters, ANN
Topologies, ANN adaptability, The stability Plasticity Dilemma.
(9)
UNIT II
Neural Network Paradigms: McCulloch Pitts Model, The perception, ADALINE and
MADALINE Models, Winner Takes All Learning algorithm, Back-propagation Learning
Algorithm, Cerebellum Model Articulation Controller (CMAC), Adaptive Resonance Theory
(ART) paradigm, Hopfield Model, Competitive Learning Model, Memory Type paradigm,
Linear Associative Memory, Real Time Models, Linear Vector Quantization, Self-organizing
Map, Probabilistic Neural Network, Radial Basis function, Time-Delay Neural Net, Congnitron
and Neo congnitron Models, Simulated Annealing, Boltzmann Machine. (9)
UNIT III
Fuzzy Logic: Propositional Logic, The Membership function, Fuzzy logic, Fuzzy Rule
Generation, Defuzzification of Fuzzy Logic, Time Dependent Fuzzy Logic, Crisp logics,
Temporal Fuzzy logic (TFL), Time Invariant Membership function, Time-variant Membership
function, Intervals, Semilarge Intervals, Interval operators, Temporal Fuzzy logic syntax,
Applying Temporal Fuzzy operators, Defuzzification of Temporal Fuzzy logic, Applicability of
TFL in communication systems
(9)
UNIT IV
Fuzzy Neural Networks: Fuzzy Artificial Neural Network (FANN), Fuzzy Neural Example,
Neuro-Fuzzy control, Traditional control, Neural control, Fuzzy control, Fuzzy Neural control.
Applications: Signal Processing, Image Data Processing, Hand written characteristics
Recognition, Visual Image Recognition, Communication systems, Call processing, Switching,
Traffic control Intelligent control, Optimization techniques.
9
TEXT BOOK:
1. Stamatios V. Kartalopoulos, Understanding Neural Networks & Fuzzy Logic, Prentice Hall
of Inida, (IEEE Press), New Delhi.
2. Simon Haykin Neural Networks a Comprehensive foundation. Pearson .edu
REFERENCE BOOKS:
1. Hassoun, Fundamentals of Artificial Neural Networks, Prentice Hall of India,
New Delhi.
2. Anderson, Introduction to Neural Networks, Prentice Hall of India, New Delhi.
3. Kosko, Neural Networks and Fuzzy Systems, Prentice Hall of India, New Delhi

EE 414(B) HIGH VOLTAGE ENGINEERING

(EE 414 Professional Elective I)
Class: IV/IV B.Tech. I Semester
Lectures:3
Branch: EEE.
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
Breakdown Mechanism of Solids and Liquids: Introduction, Intrinsic Breakdown, Electro
Mechanical Breakdown, Thermal Breakdown, Breakdown of Solid dielectrics in practice,
Chemical and Electro Chemical Deterioration and Breakdown, Breakdown due to Treeing and
Tracking, Breakdown due to Internal discharges, Breakdown in composite dielectrics,
Break down of liquids as Insulators, Pure Liquids and commercial liquids, Conduction and
Breakdown in commercial liquids Suspended particle theory, cavitation and the Bubble theory,
Thermal mechanism of the Breakdown, Stressed volume theory.
Mechanism of Breakdown of Gases, Townsends First Ionization coefficient, Cathode
processor, Secondary effects, Townsends Second Ionization coefficient, Townsends
Breakdown Mechanism, Experimental Determination of coefficients
and Breakdown in
Electronegative Gases, Steamer or Kanal Mechanism of Breakdown, Paschens Law, Penning
Effect, Breakdown in Non uniform fields and Corona Discharges, Time Lag, Practical
considerations in using Gases for Insulation purposes, Vacuum Insulation.
(9)
UNIT II
Generation of High D.C.&A.C, Voltages and Currents: Halfwave rectifier circuit, Voltage
doubler circuits, Cockroft-Walton Voltage multiplier circuit, Electrostatic Generator,
VandeGraff Generator, Generation of High AC voltages, Cascaded Transformers, Resonant
Transformer, Generation of High frequency AC High voltages, Generation of Rectangular
current pulses, Tripping control of Impulse Generator.
Definition of Impulse currents & voltages: Impulse voltage Generator circuits any two type,
Marxs multi stage voltage generator,tripping control of impulse voltage generator,Generation of
switching surges,definition of impulse current wave forms,impulse current generator.
(9)
UNIT III
Measurement of High Voltage DC, AC and Impulse Currents & Voltages: Measurement of
High D.C. voltages High ohm series Resistance, Resistance potential Divider, R-C capacitive
voltage divider, Generating Voltmeter
Series capacitance voltmeter, CVT, Electrostatic voltmeters, Peak reading a.c. voltmeters (Chubb
Fortescue method) Spharical Measurements (Spherical gaps) for High D.C. and AC voltages,
Impulse voltage, Measurement of High AC, D.C. and Impulse currents, Hall Generators for D.C.
current Measurements, Resistive shunts, Bipolar Strip shunt, Coaxial Tubular shunt, Squirrel
cage shunts, C.R.O. for Impulsive voltage and current Measurements. 9
UNIT IV
High Voltage Testing Techniques: Principle of Insulation co-ordination on H.V. and EHV
Power System, Power frequency and Impulse Testing of Isolators, Bushings, Cables and
Transformer, Testing of Insulators and circuit breakers, Testing of Surge Divertor.
(9)

TEXT BOOKS:
1. M.S.Naidu, V.Kamaraju, HIGH VOLTAGE ENGINEERING Tata McGraw Hill
2. C.L. Wadhwa, HIGH VOLTAGE ENGINEERING, New Age International.
REFERENCE BOOKS:
1. Kuffel & Abdulla, HIGH VOLTAGE ENGINEERING
2. Zangel & Kuffel, HIGH VOLTAGE ENGINEERING

EE 414(C) UNIFIED THOERY OF ELECTRICAL MACHINES

(EE 414 Professional Elective I)
Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

1.

2.
3.

4.

5.
6.

Lectures:3, Tutorials:1
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Theory of Transformation: Basic Machine, Conventional, the basic two pole machine,
voltage and torque equation of the basic electrical machine, Vector and matrix power, Matrix
form of performance equation, Concept of equivalance of mmf invariance of power, Active
linear transformation, Orthogonality, Passive transformations, Concept of equivalent circuit
and vector diagram.
(9+3)
UNIT II
Phase Transformation of 3-Phase Induction Motor: Reference phase transformation of
induction motor, stator reference frame, , equations in state variable from.
Phase Transformation of Synchronous Motor: Reference phase transformation of
synchronous motor, rotor reference frame, Equations in State variable form.
(9+3)
UNIT III
DC Machines: Mathematicl model for DC seperately excited motor, DC series motor, DC
copound motor, Transferfunction approach for these motors.
(9+3)
UNIT IV
1- Phase Commutated motors, series motors, repulsion motor, 1-Phase motors.
Steady State balance operation induction motor voltage equation , equivalent circuit, steady
state torque analysis, symmetrical component transformation and application to induction
motor, un balnced operation.
(9+3)

TEXT BOOKS:
1. P.C. Krause, ANALYSIS OF ELECTRICAL DRIVES, Tata McGraw Hill, New Delhi.
2. P.S. Bhinbra, GENERALIZED CIRCUIT THEOTY OF ELECTRICAL MACHINES
3. Vedam Subramaniam, THYRISTOR CONTROL OF ELECTRIC DRIVES
REFERENCE BOOKS:
1. AdKINS, GENERALISED MACHINE THEORY
2. Kimbark, POWER SYSTEM STABILITY VOL-III.

EE 414 (D) FLEXIBLE AC TRANSMISSION SYSTEMS

Class: IV / IV B.Tech. I Semester
Lectures:3,
Branch: EEE .
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks

UNIT-I
POWER TRANSMISSION CONTROL:
Introduction, Fundamentals of ac power
transmission, Transmission problems and needs, FACTS controllers, FACTS control
considerations, Basic functions of power electronics, Power semiconductor devices for high
power converters, Static power converters, AC controlled-based structures
(9)
UNIT-II
SHUNT COMPENSATION: SVC AND STATCOM:- Introduction, STATCOM
configuration, control, applications. Introduction, Principles of operation, configuration and
control of SVC.
(9)
UNIT-III
SERIES COMPENSATION: Intriduction, principles of operation, applications of TCSC for
damping of electromechanical oscillations. Applications of TCSC, TCSC Layout and protection,
Principles of operation of SSSC.
(9)
UNIT-IV
PHASE SHIFTER: Introduction, principles of operation of a phase shifter, applications
UNIFIED POWER FLOW CONTROLLER:- Introduction, Basic operating principles and
characteristics, control and dynamic performance`.
(9)
TEXT BOOKS:
1. FLEXIBLE AC TRANSMISSION SYSTEMS :IEE POWER AND ENERGY SERIES
2. UNDERSTANDING FACTS CONCEPTS: HINGORANI,NARAIN G,IEEE PRESS

EE 414E ADVANCED CONTROL SYSTEMS

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Lectures: 3
University Examination: 100 marks
Sessionals: 50 marks

UNIT I
Controllability and observability: Tests for continuous time systems for controllability and
observability-time varying case, minimum energy control, time invariant case, principle of
duality, controllability and observability from Jordan canonical form and other canonical forms.
Stability: Stability in the sense of Lyapunov.Lyapunovs stability and Lyapunovs
instability theorems. Direct method of Lyapunov for the linear continuous time
autonomous systems.
UNIT II
Model control: Effect of state feedback on controllability and observability. Pole
placement by feedback. Full order observer and reduced order observer. Deadbeat
control by state feedback. Deadbeat observers.
UNIT III
Optimum control: Formulation of optimal control problem, Minimum time, Minimum
energy, and Minimum fuel problems. State regulator problem. Output regulator
problem. Tracking problem.
Calculus of variations approach: Minimization of functionals of single function.
Constrained minimization. Minimum principle. Control variable inequality constraints.
Control and state variable inequality constraints.
UNIT IV
Dynamic programming: Multistage decision process in discrete time principle of
causality. Principle of invariant imbedding. Principle of optimality. Multistage decision
process in continuous time. Computation of optimal control policy in discrete time
control systems with state and control quantization.
TEXT BOOKS:
1. Modern Control System Theory-by M.Gopal, New, New age International
Publishers, 2nd edition, 1996.
2. Distributed Computer Control Systems by S.S.Lamba and V.P.Singh.
REFERENCE BOOKS:
1. Modern control engineering by K.Ogata, PHI, 3rd edition, 1998.
2. Digital Control and State Variable Methods by M.Gopal, TMH, 1997.

EE 415 SWITCH GEAR & PROTECTION

Class: IV/IV B.Tech. I Semester
Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
1. Switch Gear and Circuit Breakers: Introduction, principle of circuit Interruption, short
circuit studies in power systems, circuit breakers, types and characteristics, circuit breaker
rating, Restriking voltage, transient, characteristics of restriking voltage, circuit breaker
operating mechanism, Air-break, circuit breakers, oil circuit breakers, Air-blast circuit
breaker, Vacuum circuit breakers, SF6 circuit breakers Modification of circuit breaker duty
by shunt resistors, HVDC circuit breaking, Design of circuit breakers, Testing of circuit
breakers, Selection of circuit breaker, Types of switch gear, AC indoor switch gear, Medium
voltage a.c. switch gear, medium voltage AC H.R.C. fuses applications.
(9+3)
UNIT II
2. Protection Relays: Basic ideas of relay protection, Need for protection relaying in power
systems, Basic requirements of protective relaying. Principles and characteristics of
protective relaying, Classification of relays, Theory of application of relays, principal types
of Electro magnetic relays, Theory of Induction relay torque, General equations of
Comparators, over current relays, Instantaneous over current relay, Directional relays,
Distance relays, differential relay.
(9+3)
UNIT III
3. Static Relays: Basis for Static relay development, classification of static relays, basic
components of static relay, comparators, Amplitude comparators, Phase comparators. Coincidence type phase comparator, Over current relay, differential protection, and static
distance protection.
(9+3)
UNIT IV
4. Protection: Protection of transmission line with distance relays, over current and differential
relays, Unit protection of transmission, Bus protection, Generation protection with
differential relays, Earth fault relays, Miscellaneous faults and protection. Transformer
protection with differential relays, earth fault relays, Buchlog relay.Horngaps, surge
divertors, Rod gaps, Ground rods, Ground wires.
(9+3)
TEXT BOOKS:
1. Badhri Ram, SWITCHGEAR & PROTECTION New Age International Ltd. New Delhi.
2. C.L. Wadhwa, POWER SYSTEM ANALYSIS
3. B.R. Gupta , POWER SYSTEM ANALYSIS
REFERENCE BOOKS:
1. Ravindranath & Chander, SWITCH GEAR & PROTECTION Wiley Easter Ltd.
2. Sunil S.Rao SWITCH GEAR & PROTECTION S.Chand & Co., New Delhi.

EE 416 POWER ELECTRONICS & DRIVES LABORATORY

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 hours

Practicals:3
University Examination: 50 marks
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Determination of static characteristics of a SCR, MOSFET, IGBT.
2. Determination of characteristics of UJT, Design of UJT oscillator circuit and UJT
verification of its properties.
3. Determination of Edc and Idc of half wave and full wave rectifiers with R and RL loads.
4. Performance of a single-phase inverter circuit and its verification.
5. Design of a SCR circuit for DC motor control.
6. Performance of a chopper circuit.
7. Determination of speed torque characteristics of DC servo motor.
8. Determination of transient and frequency response of a D.C. servo system.
9. Determination of transient and frequency response of an A.C. servo system.
10. Measurement of transfer function using TFA.
11. Determination of speed torque characteristics of AC servo meter
12. Performance of 1-Phase voltage controllers for R and RL loads.

EE 417 DIGITAL SIMULATION LABORATORY

Class: IV/IV B.Tech. I Semester
Branch: EEE
Duration of University Examination: 3 Hrs

Practicals:3Hrs.
Sessionals : 25 Marks
University Examination: 50 Marks

LIST OF EXPERIMENTS
(Experiments are to be conducted in the areas of POWER SYSTEMS, POWER ELECTRONIC
CIRCUITS & MACHINES using Software like MATLAB, VHDL / View Logic,
PSPICE/PSIM/MIPOWER etc.)
POWER SYSTEMS
1.
1 .1
1.2
1.3.
1.4.
1.5.

SIMULATION OF :
Load flow analysis
Short Circuit Study
Transient stability
Relay Co-Ordination
Long term Demand forecast.
POWER ELECTRONICS

2.

SIMULATION OF :

2.1 Motor Drive Module for adjustable drives & Motion Control
2.2 Digital Control Module for Z-domain Digital Control System.
2.3 Simcoupler Module for Co-Simulation with MAT LAB/Simulink.

PSPICE:
3.

SIMULATION OF :

3.1 RC, RL, RLC Circuit

3.2 Rectifiers
3.1 Half wave
3.2 Full wave
3.3 Simulation of 1- inverter circuits.
3.4 Simulation of step up & step down choppers.
MATLAB
4.
4.1
4.2
4.3
4.4

SIMULATION OF :
Simulation of PI,PID,PID Controllers
Load frequency Control
Frequency Response
Pole Zero Plots

KAKATIYA UNIVERSITY: WARANGAL

SCHEME OF INSTRUCTION AND EVALUATION
IISEMESTER OF IV YEAR 4-YEAR B.TECH . DEGREE COURSE
ELECTRICAL AND ELECTRONICS ENGINEERING
Hours of Instruction
Per week
Course
No.

EE 421
EE 422
EE 423
EE 424
EE 426

Scheme of Evaluation

Course

Computer Methods in
Power System
Professional Elective -II
Professional Elective -III
Power Systems Laboratory
Project Work

External Evaluation
Lectures

Tutorials

Drawing /
Practical

4
4
-

3
6

12

Professional Elective II
EE-422(A) Data Structures
EE-422(B) Computer Organization
EE-422(C) VLSI Design
EE-422(D) Advanced Digital Signal Processing
EE-422 (D) Digital Control Systems

Total
Marks

Sessionals

Duration of
Exam hours
3 Hrs

Max.
Marks
100

Max.
Marks
50

150

3 Hrs
3 Hrs
3 Hrs
Viva Voce &
Report

100
100
50
100

50
50
25
150

150
150
75
250

Professional Elective III

EE-423(A) Reliability Engineering
EE-423(B) HVDC Transmission
EE-423(C) Non-Conventional Energy Sources
EE-423(D) Design of Electrical Machines
EE-423(E) EHV AC Transmission

775

EE 421 COMPUTER METHODS IN POWER SYSTEMS

Class: IV/IV B.Tech. II Semester
Lectures:3, Tutorials:1
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT I
1. Network Modeling: Impedance and admittance matrices, Graphs, Element to node
incidence matrix A, Bus incidence Matrix A, Primitive network, Network matrix, Y
bus and Z bus, formulation of network matrices, inversion of matrix using partial
inversion technique, Algorithm approach of building 3-phase balance network,
representation of off nominal transformers.
(9+3)
UNIT II
2. Short Circuit Studies: Introduction, Physical Assumptions, Three phase balanced
networks and faults, Fault in impedance form, Fault in admittance form, General fault
representation in phase quantities, Short circuit calculations for balanced networks
using Z bus, Review of load flow methods. (9+3)
UNIT III
3. Transient Stability Analysis: Derivation of swing equation, Representation of
synchronous Machines, Modeling of network and load, Numerical methods, Euler
Method, Runge-Kutta Method, Fast stability analysis, Predicting stability, Equal area
criterion, Long duration transient Stability study, Dynamic stability study
(9+3)
UNIT IV
4. Power System State Estimation Techniques: Introduction, weighted least square
techniques and weighted least square for DC state estimation
(9+3)

TEXT BOOKS:.
1. Stagg and E.L.Abaid,
ANALYSIS.
2. Allenwood

COMPUTER

METHODS

IN

POWER

SYSTEM

REFERENCE BOOKS:
1. R.N.Dhar, COMPUTER AIDED POWER SYSTEM OPERATION & ANALYSIS.
2. M.A. Pai, COMPUTER TECHNIQES IN POWER SYSTEM ANALYSIS

EE422 A - DATA STRUCTURES

Class: IV/IV B.Tech. II Semester
Branch: EEE
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
Introduction: Algorithms, Program, Data Structures Definitions, Design and Analysis
steps, Time and Storage Analysis.
Arrays: Ordered Lists, Sparse matrices, representation of arrays.
Stacks and Queues: Fundamentals, Evaluation of expression Multiple stacks and Queues
9
UNIT II
Linked Lists: Singly linked lists Stacks and Queues, Polynomial addition equivalent
relations Sparse matrices Doubly linked lists Dynamic storage, Management
Generalized lists Garbage collection and compaction.
9
UNIT III
Trees: Terminology Binary Trees Representation Traversal, Threaded Binary Trees,
Binary tree representation of trees, application.
Graphs: Terminology and representations. Traversals. Connected components and
spanning tress, Shortest paths
9
UNIT IV
Internal Searching and Sorting Techniques: Searching Binary search. Fibbonacci
Search etc. Sorting Techniques Insertion, quick, 2-way merge, Heap and multi-key
sorting.
Table Processing: Static and Dynamic tree tables Height Balanced trees. Balanced
factor. Its Definition, Hash tables Hashing function, Overflow handling.
9
(All above topics with intuitive notion of complexity of algorithm)
TEXT BOOKS:
1. Horowitz and Sahni, Fundamentals of Data Structures in C++ - III Ed., Galgotia,
1991.
REFERENCE BOOKS:
1. Seymour Lipschutz, Theory and Problems of Data Structures, Schaums series,
McGraw Hill.
2. Tremblay and Sorenson, An Introduction to Data Structures with applications, II
ed., McGraw Hill,1985.
3. Knuth, D.H, Fundamental Algorithms: The art of computer programming, Vol.I,
Addison Wesley, 1973, Narsoa Publishing House Fifth reprint,1990.
4. Allen M.Weiss, Data Structures in C.

EE 422B COMPUTER ORGANIZATION

Class: IV/IV B.Tech. II Semester
Branch: EEE
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
1. Basic Structure of Computer Hardware and Software:
Functional units Basic operational concepts Bus structures Software performance
Distributed computing Historical perspective.
2. Addressing methods and machine program sequencing:
Basic concepts Main memory operations Instructions Instruction sequencing
Addressing modes Assembly language Basic input output operations Stacks and
queues Subroutines.
3. THE PROCESSING UNIT: Basic concepts Execution of a complete instruction
Hard wired control Microprogrammed control.
UNIT II
4. INPUT-OUTPUT ORGANISATION : Accessing I/O devices Interrupts Direct
Memo Access Programmed I/O.
5. THE MEMORY : Basic concepts Semiconductor RAM memories ROM Speed,
8i and Cost Cache memory addressing mapping- virtual memories/
UNIT III
6. ARITHEMATIC: Number representation Adding of positive numbers Fast
address Signed addition and Subtraction Arithmetic and branching conditions
Multiplication of positive numbers Signed operand multiplication Integer division
Floating point numbers at operations.
UNIT-IV
7. COMPUTER PERIPHERALS: I/O devices Online storage System performance
considerations.
8. Introduction to CISC, RISC Motorola and Power PC processor families.
TEXT BOOKS:
1. V.C.Hamacher Computer Organisation (TMGH) 4th edition.
REFERENCE BOOKS:
1. Morris Mano Computer System Architecture - (PHI)1991
3. John P.Hayes Computer System Architecture and Organization (MGH) 1998.

EE 422 (C) VLSI DESIGN

(Professional Elective-I)
Class: IV/IV B.Tech. II Semester
Branch:E.E.E.
Duration of University Examination: 3 hours.

Lectures: 3 Tutorials: 1
University Exam. : 100 marks
Sessionals : 50 marks

UNIT I
1.Introduction to MOS Technology: MOS and related VLSI Technology, Basic MOS
transistors, enhancement and Depletion mode transistor action n MOS fabrication, CMOS
fabrication, Bi CMOS Technology.
2.Basic Electrical properties of MOS AND Bi CMOS circuits. MOS and Bi CMOS
circuit design processor.
9+3
UNIT II
3.Basic Circuit Concepts: Sheet resistance, Area capacitances of layers, capacitance
calculations, The delay units, Inverter delays, Driving large capacitive loads, propagation
delays, wiring capacitances, scaling of MOS circuits.
9+3
UNIT III
4.Sub System Design & Layout: Architectural issues, Switch logic, Gate logic, The
inverter, Examples of structured design, clocked sequential circuits, sub system design
process
9+3
UNIT IV
5. Illustration of Design Process: Computational elements, Memory, register, timing
considerations, Introduction to GaAs technology, Introduction to various HDLS.
9+3
TEXT BOOKS:
1. Douglas A Pucknell & Kamran Eshragaian, Basic VLSI Design , Prentice Hall of
India, New Delhi.
2. Bhaskar VHDL Pearson.edu New Delhi.
REFERENCE BOOKS:
1. Weste, Principles of CMOS VLSI Design, Addison Wesley, New York.
2. Gelger.R.L Allen .P.E Strader NR.VLSI Design Technology for Analog and Digital
Circuits

EE 422D ADVANCED DIGITAL SIGNAL PROCESSING

(EE 422 Professional Elective II)

Class: IV/IV B.Tech. II Semester
Branch :E.E.E
marks
Duration of University Examination: 3 hours.

Lectures: 3
University Examination : 100
Sessionals: 50 marks

UNIT I
1.Multirate Digital Signal Processing: Multirate Signal processing, Decimation,
Interpolation, Time domain and frequency domain characterization of sampling rate
alteration devices, Fractional sampling rate conversion, Direct-form FIR structures,
Polyphase filter structures, Time-variant filter structures, Multistage implementation of
sampling rate conversion, Design of Phase shifters, Interfacing of digital system with
different sampling rates, Implementation of Narrow band low pass filters,
Implementation of digital filter banks, sub band coding of speech signals, Quadrature
mirror filters, Transmultiplexers, oversampling ADCs and DACs.
9

UNIT II
2.Power Spectrum Estimation: Cross correlation and Auto correlation of discrete time
signals, power spectral density, periodogram, use of DFT in power spectrum estimation,
non parametric methods for power spectrum estimation Bartlett method, Welch
method, Blackman & Tukey method; Parametric methods for power spectrum estimation
Autoregressive (AR), Moving average (MA) and Auto regressive Moving average
(ARMA) models, Yule-Walker method, Burg method, Unconstrained least squares
method.
9
UNIT III
3.Adaptive Signal Processing: Adaptive Systems, Open and closed loop adaptations,
General form of adaptive linear combines, performance surface, gradient and minimum
mean-square error, input correlation matrix, eigen values and eigen vectors of correlation
matrix, Gradient search methods, Simple gradient search algorithm and its solution,
learning curve, newton method, Method of Steepest descent; Gradient component
estimation derivative measurement, Variance of gradient estimate, Weight-vector
solution, mis adjustment.
9

UNIT IV
4.Adaptive Algorithms & Structures: Derivation of LMS algorithm, Convergence of
weight vector, learning curve, noise in the weight-vector solution, mis adjustment,
comparison of steepest descent and LMS algorithms, Z-transform in adaptive signal
processing Correlation function and power spectra, performance function, performance
surfaces; LMS/Newton algorithm, sequential Regression (SER) algorithm, Linear
Random Search (LRS), Adaptive recursive filters, Lattice Structures
9

TEXT BOOKS:
1. John. G. Proakis, D.G. Manolakis, Digital Signal Processing: Principles, Algorithms
& Applications,Prentice Hall India,New Delhi.
2. Bernard Widrow, S.D. Stearns, Adaptive Signal Processing, Pearson Publication,
New Delhi.
REFERENCE BOOKS:
1. S. K. Mitra, Digital Signal Processing: A Computer Based Approach, Tata McGrawHill, New Delhi.
2. L.R. Rabiner & B. Gold, Digital Signal Processing, Prentice Hall of India,
New Delhi.
3. A.V.Oppenheim & R.W. Schafer, Digital Signal Processing, Pearson Publication,
New Delhi.
4. Mischa Achwartz & Leonard Shaw, Detection & Estimation of Signals, McGraw Hill,
New York, 1976.

EE 422 E DIGITAL CONTROL SYSTEMS

(Professional Elective II)
Class: IV/IV B.Tech. II Semester
Branch: EEE
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
Introduction to Discrete Control Systems: Introduction, Discrete time control,
Continuous time control, Comparison, Block diagram of digital control.
Z-Transforms: Z-Transforms of elementary functions, Properties, Inverse Z-transforms,
Z-transform method for solving difference equations
9
UNIT II
Discrete type control system in Z-plane Analysis: Introduction, Impulse sampling and
data hold, Z-transform by convolution Integral method. Reconstruction of original signal
from sampled signal pulse transfer function, Realization of Digital Controllers and
Digital filters
9
UNIT III
State Variable Analysis of Digital Control Systems: Introduction, State description of
digital processors, State description of sampled continuous time plants, state description
of systems with dead time, solution of state difference equation, controllability and
observability, Multi variable systems.
9
UNIT IV
Design of Digital Control: Introduction, Mapping between S-plane and Z-plane,
Stability analysis of closed loop system in Z-plane, Transient and Steady State response
analysis, Design based on Root locus method, frequency response method and analytical
design method.
9
TEXT BOOKS:
1. Ogats, Discrete-Time Control System, Pearson Education.
2. B.C. Kuo, Digital Control System, Prentice Hall of India.
REFERENCE BOOKS:
1. M.Gopal, Digital Control and State Variable Methods, Tata McGraw Hill, New
Delhi.

EE 423(A) RELIABILITY ENGINEERING

(EE 423 Professional Elective III)
Class: IV/IV B.Tech. II Semester
Lectures:3,
Branch: EEE
University Examination: 100 marks
Duration of University Examination: 3 hours
Sessionals: 50 marks
UNIT - I
1. Fundamental concepts in Reliability Engineering: Introduction, General reliability
function, General concepts, Hazard rate, reliability function, Bath tub Hazard rate
curve, Mean time failure.
2. System reliability: Series configuration, Parallel configuration, Mixed configuration,
application to specific hazard models, Mean time to failure of systems, Logic
diagrams, Marker models, Marker graphs.
9
UNIT II
3. Failure Data Analysis: Failure data, Mean failure rate, Mean time to failure, Mean
time between failures, Graphical plots, MTTF in terms of failure density, Reliability
in terms of Hazard rate and failure.
4. Hazard Models: Constant Hazard, Linearly increasing Hazard, The weibull model,
Distribution functions and reliability analysis, Density functions, expected value,
some important distributions, Standard deviation & variance.
9
UNIT III
5. Reliability Improvement: Improvement of components, redundancy, element
redundancy, Unit redundancy, Standby redundancy, Optimization, Reliability cost
trade off.
6. Maintainability and Availability: Maintainability, availability, System down time,
Instantaneous repair rate, Mean time to repair, Reliability and availability functions.
9
UNIT IV
7. Applications: Software reliability, Mechanical reliability, Power System reliability,
and Computer System reliability modeling, Human reliability.
9

TEXT BOOKS:
1. L.S. Srinath, RELIABILITY ENGINEERING.
2. Ranganth, RELIABILITY ENGINEERING.
REFERENCE BOOK:
1. Billington, & Alan, RELIABILITY ENGINEERING.

EE423B H.V.D.C. TRANSMISSION

(Professional Elective III)
Class: IV/IV B.Tech. II Semester
Branch: E.E.E.
Duration of University Exam: 3 Hrs.

Lectures: 3 Tutorials: 1
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
1. Introduction: Choice of HVDC Transmission system, types of HVDC systems,
configuration and parts of HVDC system, Economic comparison of HVDC with
EHVAC systems, merits of HVDC system interconnection.
2. Fundamental equations of HVDC power flow, steady state Vd Vs Id characteristics
of converters, Reversal of power through HVDC link.
3. Converter connections, rectifier and inverter wave forms Single phase bridge
connection, three phase six pulse bridge, Three phase twelve pulse bridge connection,
inversion, commutation and commutating reactance, analysis of voltage waveforms
with overlap angle.
9+3
UNIT II
4. Equations of Voltage and current on DC side and AC side of converter - no load
without phase control, no load with phase control, rectifier mode, with phase control
and load current / over lap angle rectifier mode, equivalent circuit of rectifier,
Equations for Inverter, equivalent circuit of inverter, complete equivalent circuit of
HVDC link.
5. Harmonic filters: Introduction, terms and definitions, shunt filters, series filters,
configuration of AC harmonic filters harmonics in DC voltage, DC harmonic filters,
damping circuit and DC surge capacitors, configuration of DC filters
9+3
UNIT III
6. HVDC Circuit breaker: Principle of DC current interruption, commutation
principle.
7. HVDC System Control: Review of Control requirements, alternative principles for
HVDC control terms and definitions, hybrid control current control, converter unit
control tap changing valve unit firing control, individual phase control equidistant
firing control.
9+3
UNIT-IV
8. Reactive Power Compensation in HVDC Systems Reactive power requirements,
compensation practice, reactive power balance, equations for active and reactive
power on AC & DC side, power factor and reactive power requirements of rectifier
and inverter equivalent circuit of AC network and converter.
9+3
TEXT BOOK:
1. S.Rao, EHV-AC & HVDC Transmission Engg. Practice, Khanna Publishers, 1990.
REFERENCE BOOK:
B.W.Khobark, H.V.D.C. Transmission, Vol I, Wiley Inter-Science

EE423(C) NON-CONVENTIONAL ENERGY SOURCES

(Professional Elective III)
Class: IV/IV B.Tech. II Semester
Branch: E.E.E.
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
1. INTRODUCTION: Distinction between conventional and non-conventional sources of
energy Brief Description of different sources
2
2. SOLAR ENERGY: Solar Energy option- solar radiation- solar flat plate collectors- air
heaters- collectors with booster mirrors- concentric collectors- Thermal Storage systems. Solar
photo voltaic (SPV) systems.
Introduction Prospects of SPV systems. Principle of a PV Cell. Large scale SPV
systems. Economic considerations of SPV systems. PV sell technology. Merits and Limits of
SPV systems. Applications of SPV systems- Street lighting, domestic lighting, Battery
charging, SPV pumping systems. Concept of satellite solar power systems (SSPS)
7
UNIT-II
3. WIND ENERGY
Brief history of wind power- Principles of wind power- Operation of a wind turbine- Site
Characteristics.
4. GEOTHERMAL ENERGY:
Origin and types of geothermal energy- Operational Difficulties- Vapor dominated systemsLiquid dominated systems- Petro- thermal systems- Hybrid geo thermal systems.
9
UNIT-III
5. ENERGY FROM OCEANS:
Ocean temperature differences- the open and closed cycle analysis- Modification of the Open
cycle Analysis- Closed or the Anderson cycle Analysis- Ocean waves- Wave motions and
tides- Energy from the waves.
9
UNIT-IV
6. BIO-ENERGY: Introduction-Bio-mass conversion- Technologies- Wet Process- Dry
Process- Photo synthesis- Biogas generation- Biogas from power plant wastes-methods of
maintaining Biogas production- Utilization of Biogas- Biogas gasification. Applications of
gasifies.
5
7. MAGNETO-HYDRO DYNAMIC (MHD) POWER GENERATION: MHD systemOpen and Closed systems- MHD design problems and developments- Advantages of MHD
systems.
4

TEXT BOOKS:
1. Bansal N.K, Kaleeman and M.Miller, RENEWABLE ENERGY SOURCES AND
CONVERSION TECHNOLOGY, TATA Mc Graw-Hill, New Delhi
2. Rai G.D NON-CONVENTIONAL ENERGY SOURCES, Khanna Publishers, New
delhi.

REFERENCE BOOKS:
1. EL-Wakil M.M, POWER PLANT TECHNOLOGY, Mc Graw-Hill, New York.
2. Duffie and Beckman, SOLAR ENERGY THERMAL PROCESS, John Wiley & Sons, New
york.

EE 423D DESIGN OF ELECTRICAL MACHINES

(Professional Elective III)
Class: IV/IV B.Tech. II Semester
Branch: E.E.E.
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
1. Basic Principles of design of electrical machines: Main Dimensions, Loading, Output
equation, size of machine, choice of magnetic loading, choice of electric loading, effect of
increasing linear dimensions in electrical machines.
9
UNIT II
2. Transformer: Core, Windings, Output equation, Copper and iron lesson-optimum design,
designs for minimum cost, Effect of change in frequency, Thermal rating, heating time
constant of transformer, design of tank, testing of transformer, cooling of transformer, powers
transformers, current transformer. Formulation of design problem, variables required, flow
chart, evaluation of main dimensions.
9
UNIT III
3. D.C.Machines: Output equation, number of poles, relation between length and diameter of
armature, armature conductor ampere turns of magnetic circuit, design of commutator,
interpoles, Design problem formulation, choice variables of performance, flow chart, objective
and constraint functions, main dimensions.
4. Induction Motor: Output equation, main dimensions, stator windings, slot insulation, rotor
design, air gap length number of rotor slots, slot winding, skewing, temperature rise and losses
stator winding design, rotor winding design. Design principles. Operation with variable
frequency, non sinusoidal supply, torque pulsations, flow chart, min. dimensions.
9
UNIT IV
5. Synchronous Machines: Salient pole alternators, turbo alternators, output equation design
of salient pole machine, armature design, stator design, field winding design, damper winding,
cylindrical rotor design.
9
TEXT BOOKS:
1. A.K.Shawney, Electrical Machines Design, Khanna Publishers.
2. H.M.Rai, Principles of Electrical Machine Design, Satyaprakashan Publishers.
REFERENCE BOOKS:
1. M.G.Say, Performance and Design of A.C.Machines, ELBS.
2. Clayton, Performance and Design of D.C. Machines.

EE 423 (E) EHV AC TRANSMISSION

(Professional Elective III)
Class: IV/IV B.Tech. II Semester
Branch: E.E.E.
Duration of University Exam: 3 Hrs.

Lectures: 3
University Exam: 100 Marks
Sessionals: 50 Marks

UNIT-I
Line Parameters: Preliminaries- necessity of EHV AC transmission- advantages- Line and
ground parameters- Resistance of conductors- Properties of Bundled conductors- Inductance,
Capacitance calculations, Sequence inductances and Capacitance- Modes of PropagationGround return.
9
UNIT-II
Voltage gradient of conductors: Electrostatics- Field sphere gap-field of line charges and
properties- charge- potential relations for multi conductors- surface voltage gradient on
conductors- Distribution of voltage gradient on sub conductors of bundle.
9
UNIT-III
Electro static Field: Calculation of Electro static field of EHV lines, Effect on human,
animals and plants- electrostatic induction in unexercised circuit of double circuit line. 9
UNIT-IV
Voltage Control: Voltage control using synchronous condensers- cascade connection of shunt
and series compensation- Sub synchronous resonance in series compensator lines- Static,
Reactive compensation system.
9
TEXT BOOKS:
1. EHV AC Transmission Engineering by R.D. Bega mudre- New Age International PVT ltd.
REFERENCE BOOKS:
1. EHVAC and DC Transmission by S. Rao- Khanna Publishers.
2. HVDC Transmission by E.W. Kimbark- John Wiley and Sons Publications.

EE 424 POWER SYSTEMS LABORATORY

Class: IV/IV B.Tech. II Semester
Practicals:3
Branch: EEE
University Examination: 50 marks
Duration of University Examination: 3 hours
Sessionals: 25 marks

LIST OF EXPERIMENTS
1. Performance characteristics of long artificial transmission line.
2. Reactive power characteristics of long artificial transmission lined
3. Steady state power limit of normal T and

transmission lines

4. Reactive power control by tap changing transformers.

5. Testing IDMT over current relay.
6. Testing of static differential relay.
7. Sequence reactance of power system components.
8. Active and Reactive power control of synchronous machine.
9. Short circuit oscillographic studies on an alternator.
10. Measurement of sequence impedance for 3-phase 2-winding and 3-winding transformer.