Attach to Vol. No.

: TT187E-01, TT178E-01
CAUTION: Parts numbers on the drawing are provided only for reference purpose.
ZAXIS 110/120/200/225USR/230/270 CAB HARNESS To order parts on the drawing, be sure to consult the Parts Catalog.

LIGHTER

LEARNING SW-2

DIRECTION
PULLING
HARNESS
POWER BOOST SW
TIN PLATE
ML-CRANE-10

MEASURE HERE

ML-CRANE-11
CANCEL SW-1 BLACK RETAINER

CANCEL SW-3 BACK COVER

YAZAKI

MONITOR C-12
ML-CRANE-7

CANCEL SW.

MONITOR A-1
MONITOR A-2
MONITOR A-3
MONITOR A-4
MONITOR A-5
MONITOR A
SWING ALARM-1 MONITOR A-6 INSTALL MONITOR A, B AND C AS FOLLOWS.
RELAY BOX
TURN BACK CONNECTOR'S SURFACE TO A. SLEEVE MUST BE SHORT LIGHTER
ML-CRANE-8
VIEW C-C' IS AS FOLLOWS.

MONITOR A, B, C
MONITOR A-16
MONITOR B
RELAY BOX
RELAY BOX
MONITOR A-8
MONITOR A-9 ML-CRANE-6 VIEW C-C'
MONITOR A-7 MONITOR A-10 MONITOR C-9 MONITOR C
LEARNING SW-1 MONITOR A, B, C * MONITOR A, B AND C MUST BE UPPER SIDE
WHEN THE RELAY BOX IS RIGHT SIDE
MONITOR C-11
MONITOR A-12
MONITOR A-13 MONITOR C-10
1. IF NO COMMENT, WIRE 0.3~1.25 MAY BE CAVS AND
MONITOR A-14 MONITOR C-8
MONITOR A-15
WIRE 2~5 MAY BE AVS.
ML-CRANE-3
ML-CRANE-4 MONITOR A-16
MONITOR B-1 HARNESS END OF TAPE 2. PIN ARRANGEMENT OF THIS DRAWING
MONITOR B-2 PULLING INDICATE VIEW POINT FROM THE
DIRECTION MEASURE HERE
MONITOR B-3 OTHER SIDE CONNECTOR.
MONITOR B-4
MONITOR B-5 ALL SIRSUITS MUST BE TIGHTER TOGETHER 3. NO ELECTRIC JOINT MAY BE BETWEEN FH AND KC.

MONITOR B-6
MONITOR B-7
MONITOR B-8
4. PUT THE PART No. LEBEL ON THE HARNESS.
MONITOR B-9
5. PULG CONNECTORS MUST BE BRASS.
MONITOR B-10 6. COLOR SIGN DUE TO JASO D607.
MONITOR B-11 LIGHTER 7. GENERAL EXPRESS ON THE DRAWING DUE TO #X4259303.
MONITOR B-2 8. OUTSIDE DIAMETER OF CORRUGATE TUBE FOR CAB EARTH 1,
MONITOR B-13 CAB EARTH 2, QOS-CON AND G-LIGHTER MUST BE LESS THAN 20mm.
MONITOR B-14
MONITOR B-15
MONITOR B-16
FASTEN
MONITOR C-1 WITH TAPE
MONITOR C-2
MONITOR C-3
MONITOR A-11
1. ICX-A AND B MUST BE ARRANGED AS FOLLOWS 2. ICX-C AND D MMUST BE ARRANGED AS FOLLOWS
MONITOR C-7 BY USING THE TAPE. BY USING THE TAPE.
MONITOR C-15 MONITOR C-13 TURN BACK CONNECTION'S SUR FACE TO C. TURN BACK CONNECTOR'S SURFACE TO A.
ON THE LINE OF ICX-A AND B, FASTEN ICX-A AND B WITH ON THE LINE OF ICX-C AND D, FASTEN ICX-C AND D WITH
IN 50mm FROM I AND IN BETWEEN MCX-A AND B USING A TAPE. IN 50mm FROM I AND IN BETWEEN MCX-C AND D USING A TAPE.
MONITOR C-14
VIEW A-A' IS AS FOLLOWS VIEW B-B' IS AS FOLLOW.

MONITOR C-6

ML-CRANE-1
VIEW B-B'
VIEW A-A'
ML-CRANE-5
* ICX-C AND D MUST BE UPPER SIDE SATELLITE / PC
* ICX-A AND B MUST BE UPPER SIDE WHEN MCX-D IS RIGHT SIDE. ML CRANE
SATELLITE/PC-10 WHEN MCX-A IS RIGHT SIDE.

ML-CRANE-2
SATELLITE/PC-2
SATELLITE/PC-1 SWING ALARM

LEARNING SW MOVE THIS SIDE

ASS'Y HOUSING CNO4M (N)

SATELLITE/PC-3
INSTALL A PULLER
ALL SIRSUITS MUST BE TIGHTER TOGETHER (YAZAKI 7147-9178) AND
SATELLITE/PC-4 SPARE FUSES 5A, 5A, 10A AND 20A.
SATELLITE/PC-5

HORN-SW.
TIN PLATE
SATELLITE/PC-7 PRINT USAGE AND AMPERE
SATELLITE/PC-8 ON THE COVER.
APPLY RED TAPE

SATELLITE/PC-6

RADIO
SATELLITE/PC-9
LABEL

SPARE

YAZAKI 7123-2044
CN TYPE FLANGE ASSY FEMALE PIUG