Scribd
Upload
672 views1 page

Inspection Report Format

This inward inspection report details the inspection of parts received from a supplier. It lists 22 specification parameters with their nominal and tolerance values. The actual measured dimensions for 5 samples of each parameter are reported, along with the inspection results. The inspected, received, accepted, reworked, and rejected quantities are also documented. The report is signed off by the inspector and verifier.

Uploaded by

kgkganesh8116
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
672 views1 page

Inspection Report Format

This inward inspection report details the inspection of parts received from a supplier. It lists 22 specification parameters with their nominal and tolerance values. The actual measured dimensions for 5 samples of each parameter are reported, along with the inspection results. The inspected, received, accepted, reworked, and rejected quantities are also documented. The report is signed off by the inspector and verifier.

Uploaded by

kgkganesh8116
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

INWARD INSPECTION REPORT

Insp. Report No. / Date Supplier Name

Part Name Invoice / DC No. - Date

Part No. / Rev. PO / Work order No.

Specification Actual Dimensions in mm Result of


Sl. No. Parameters Measuring Instrument Observation (Ok /
Nominal Tol 1 2 3 4 5 Not Ok)

10

11

12

13

14

15

16

17

18

19

20

21

22

Received Qty.
Remarks
Insp. Qty.

Accep. Qty.

Rework Qty.

Rej. Qty.

Inspected By Verified By

You might also like