NVCB 9000 Series
Characterised Disc Ball Valve
2-way Flanged DN 65 to DN 150
NENUTEC present the NVCB Characterised Disc
Flanged Ball valve. These valve are mainly use in
the HVAC system to regulate the flow of water
and steam in response to the demand of a control-
ler.
Range from DN 65 to DN 150
2 Way
Forged brass body
Low leakage factor of up to 0.01% of Kvs
High close-off pressure actuator satisfies demand-
ing requirements of high-rise buildings and high-
pressure pumping systems
PN 16 or 232 PSI system operating pressure
Actuator can be factory or field installed
Equal Percentage Flow Characteristic
Specifications
Valve Body Pressure Rating 16 Bar PN16 (232 psig) Meets Requirements of ANSI B16.15, Class 250
Fluid / Ambient Temperature -5 to 121 oC water at an Ambient Temperature of 40 oC
Limits
Shipping & Storage Tem-
-40 to 70 oC (-40 to 158 oF)
perature Limits
Body Sizes See Table 1: Valve Code Number Selection Guide
Chilled, Hot Water, up to 50% Glycol Solutions and Saturated steam 100
Service
KPa
Seat Leakage 0.01% of KVs
Pipe Connection Flanged DIN
Body Cast IronPolyester Coated
Body Materials Stem Chrome Plate Brass
Seat PFTE
Seal EPDM Double O-Ring
Ball Chrome Plate Brass
Flow Characteristics 2 Way Equal Percentage
Maximum Close off Pressure See Tables 2
43
NVCB 9000 Series
Characterised Disc Ball Valve
2-way Flanged DN 65 to DN 150
tic
ris
te
n
n
io
c
d
io
ra
ct
te
ze
at
ha
le
na
Si
ur
Se
C
he
ge
fig
s
ow
rie
Vs
yp
an
on
Fl
se
K
H
Fl
C
NVCB 9 2 0 6 5 - F E
Valve Code Number Designations
Valve Body Type
NVCB 9 = NVCB 9000 Series Characterised Ball Valve Flanged
Configuration
2 = 2-way
Valve Size
065 = DN 65
080 = DN 80
100 = DN 100
125 = DN 125
150 = DN 150
Pipe Thread
F = Flanged DIN
KVs
DN 65 80 100 125 150
KVs
2 way 3 way 2 way 3 way 2 way 3 way 2 way 3 way 2 way 3 way
E 63 - 100 - 140 - 230 - 320 -
Table 1: Valve Code Number Selection Guide
44
NVCB 9000 Series
Characterised Disc Ball Valve
2-way Flanged DN 65 to DN 150
Table 2 : Maximum Close-off Pressure KPA (PSI) with Actuator
Maximum Shutoff Pressure KPA (PSI)
Model Torque Spring DN65 DN80 DN100 DN125 DN150
(Nm) Return
NAF.. 08 8 Yes 340 (50) 276 (40) - - -
NAC. -- 20 20 No 690 (100) 550 (80) - - -
NAC. -- 40 40 No 1000 (145) 690 (100) 690 (100) 690 (100) 400 (58)
Piping Diagram
Remarks:
For application requiring a differ-
ent flow pattern, please consult
your NENUTEC representative
A B
Application Overview
The NVCB 9000 series feature are available in two-way
Flanged. The Valve can be ordered with NENUTEC
Actuator NAC../ NAF and NTC.. / NPC. controller
for a complete HVAC solution.
45
NABA Series NVCB 9000
NABA Series
Series
Ball Valve Actuator 2 Nm & 5 Nm Characterised
Ball Valve Actuator
Disc Ball
2 NmValve
& 5 Nm
2 Points and 3 Points Control 2-way
2 Points
Flanged
and 3 Points
DN 65 to
Control
DN 150
Table 3 : Dimensions of Valve Body (mm)
xing open Mixing
Actuator
closed
Position Mixing open Actuator Position
C A =Dimensions
open A C DN (mm)
open L A = closedH AA C B CA = open D Bolt
openHoles
B = closed 90 B = open B = closed 90
C = open 65 93C = open 86 44 101 266C = open 145 4 x 18
B B B
80 0 108 95 55 125 275 160 8 x 180
Coil
Coil
Coil
2 Way 100 closed
120 104 69 148 272 180 8 x 18closed
125 145 106.5 80 180 284 210 8 x 18
(ALWAYS
150 CCW!) 168 131.5 92 205 298 240 (ALWAYS
8 xCCW!)
22
2-way closed 2-way open
90 90
3-way closed 3-way open
OEM Customised Version on Request
rsions, e.g. with your
TELIMA/NENUTEC
own brand name, offers
withyou
colour-
actuators in customised versions, e.g. with your own brand name, with colour-
ease contact us for further
coordinated
information.
applications and with your particular demand. Please contact us for further information.
Important Remark
and material selections
Consult
for your
NENUTEC
intended
representatives
application. for specific requirements and material selections for your intended application.
disposed as household garbage. Please consider
This actuator
the localincludes
valid legislation.
electrical and electronic components and may not be disposed as household garbage. Please consider the local valid legislation.
AC / DC 24 V: Connect via safety isolating transformer.
corporate a device which disconnects the phase
AC conductor
230 V: (with
Toat
isolate
least a
from
3 mm
the main power supply, the system must incorporate a device which disconnects the phase conductor (with at least a 3 mm
contact gap).
r: Main Office : Headquarter:
NENUTEC ASIA PACIFIC PTE LTD
7030 Ang Mo Kio Ave 5 #08-55
e 80 Northstar@AMK Schachenstrasse 80
Switzerland Singapore 569 880 CH-8645 Jona / Switzerland
5 212 40 60 Phone : +65 6570 3233 Phone : +41 55 212 40 60
212 40 69 Fax : +65 6570 6783 Fax :+41 55 212 40 69
elima.ch Email :
[email protected] Email :
[email protected] enutec.com Website : www.nenutec.com.sg Website : www.nenutec.com
be liable for damages resulting from
The misapplication
performance specifications
or misuse of its
areproducts.
nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products.
46
50
