Rapid Fiber Panel Series

Fiber Termination Panels with RapidReel Fiber Cable Spools

2016 P RO DU CT CAT ALO G | 3 RD ED ITION

Contents
Rapid Fiber Panel Series

Overview..................................................................................................................................... 4-5

Fiber Termination Panels with MPO Connector - (Indoor and Indoor/Outdoor Cable Options)

Specifications................................................................................................................................... 6
Typical Applications.............................................................................................................................
Central Office/Data Center................................................................................................................ 7
Wireless Connectivity......................................................................................................................... 8
1 RU (1.75 H) Rapid Fiber Panels....................................................................................................... 9
3 RU (5.25 H) Rapid Fiber Panels..................................................................................................... 10
4 RU (7 H) Rapid Fiber Panels.......................................................................................................... 11
Optical Distribution Frames................................................................................................................ 12
FPX Series Fiber Panels..................................................................................................................... 13

Fiber Termination Panels with Single Fiber Breakouts - (Indoor Cable Options)

Specifications................................................................................................................................. 14
Typical Application Central Office/Data Center.................................................................................... 15
1 RU (1.75 H) Rapid Fiber Panels..................................................................................................... 16
3 RU (5.25 H) Rapid Fiber Panels..................................................................................................... 17
4 RU (7 H) Rapid Fiber Panels.......................................................................................................... 18
Frame Fanout Mounting Brackets........................................................................................................ 19

Fiber Termination Panels with Stub and Pulling Eye - (Indoor and Indoor/Outdoor Cable Options)

Specifications................................................................................................................................. 20
Typical Application Central Office/Data Center.................................................................................... 21
1 RU (1.75 H) Rapid Fiber Panels..................................................................................................... 22
3 RU (5.25 H) Rapid Fiber Panels..................................................................................................... 23
4 RU (7 H) Rapid Fiber Panels.......................................................................................................... 24

Accessories

Fiber Inspection Kit.......................................................................................................................... 25

Specifications

3 mm 24-Fiber Zip Plenum Rated Microcable....................................................................................... 26

3.6 mm 12-Fiber Indoor/Outdoor Singlemode Microcable..................................................................... 27
Rapid Fiber Panel Series
Overview

The Rapid Fiber panel is an important innovation in the fiber optic panel market. Serving as a
key distribution point between the electronic equipment and the main optical distribution frame,
the Rapid Fiber panel offers service providers unmatched savings in installation time, labor costs
and performance.

Rapid Fiber panels utilize CommScope's unique RapidReel fiber cable spools to deploy dual
12-fiber microcableswhich means the cable is always the right length. Available in 100'
increments (up to 1000'), the microcable terminates to a single fiber breakout (SC or LC) or
MPO which enables a plug-and-play connection to the main distribution frame or other point
of connection. Stub-end cable options are available for splicing at the far end. The Rapid
Fiber panel connector options and microcables ensure fast cable routing and easy handling by
technicians; and offers maximum space savings for high density fiber applications.

The Rapid Fiber panel's combination of microcable, RapidReel spooling and connector
technology in a single panel not only relieves cable congestion but also simplifies the ordering
and inventory of equipment. The panel also features CommScope's industry-leading cable
managementproviding bend radius protection, intuitive cable routing paths and excellent
physical protection for optimal network performance. Panels are available with SC or LC
connectors on the front, singlemode or multimode, and Indoor/Outdoor or Plenum microcable
with single fiber breakouts (SC or LC), MPOs or stubs on the far-end.

Benefits S
 pace Savings Rack Density: Compact low loss MPO
Cost Savings: RapidReel cable spools reduce upfront connector design and multi-fiber microcable is ideal for
deployment costs by simplifying site survey inspections, high density intrafacility applications. Excess fiber is stored
reducing labor hours and streamlining cable deployment. within unit no additional enclosures are required.

S
 peed of Deployment: Pre-connectorized, plug-and-play S
 pace Savings Overhead: Each Rapid Fiber panel cable
solution eliminates splice labor requirements and speeds is the equivalent of 24 fiber jumpersresulting in 70% space
networkconstruction. savings within FiberGuide cable management compared
to 1.7 mm jumpers, and 85% space savings within ladder
Access: Technician-friendly, front-facing interface ensures racking compared to standard IFCcable.
trouble-free maintenance and fast service turn-ups.
Performance: Offers superior cable management with
Simplified Ordering: All-in-one panel, microcable and slack highly reliable connectors for uninterrupted network
storage solution simplifies ordering and stocking requirements. operation and high quality of service.

4 For more information, visit commscope.com

Rapid Fiber Panel Series
Overview

The Rapid Fiber panel incorporates the latest panel, cable and connector technologyand can help drive down total cost of installation
by as much as 25%.

Key features:
Panel

RapidReel fiber cable spools ensure IFC cable is always the right length; available in 100' increments
(up to 1000')

Spool assembly is equipped with a pulling eye for easy cable routing and installation

Mounting brackets allow 19" or 23" rack installation

Meets UL 1863 and NEBS Level 3 requirements for

central office applications RapidReel Cable Spools Speed Installation
Requirements and Lowers Deployment Costs
Seamlessly integrates with plug-and-play equipment such as CommScope's NG3, NGF, LGX and FDF
fiber frames; or

Any fiber frame equipment

Cable Types

Dual 12-fiber 3.6 mm singlemode indoor/outdoor cable; or

Dual 12-fiber 3.0 mm plenum rated cable

Single fiber breakout with pulling sock; or

Cable stubs come with a pulling eye

GR 409 compliant, robust microcable design to fit a variety of applications and environments Dual 12-Fiber 3.0 mm Microcables Compared
with 24-Fiber Breakout Cable
Reduced bend radius fiber technology provides cable protection and reduces concerns around proper
handling, slack storage, and attenuation loss from tight bends

Connectors

Cable can be terminated to single fiber breakouts with SC/LC connectors or MPO connectors
Applications
Panel available with singelmode SC/LC connectors Central Offices

Low MPO and SC/LC connector insertion loss and return loss minimizes impact on link loss budget Switch Centers

Optical connectors designed and tested to GR 326 and GR 1435 Data Centers

Intermediate frames and panels

Co-location environments

Cell Sites

Intra-building networks

5 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

Specifications
1 RU (1.75") 3 RU (5.25") 4 RU (7")
Mounting width: 19-inch or 23-inch, EIA or WECO
Recess options: 2, 4 or 5 inches (5.08, 10.16 or 12.7 cm)
Spool assemblies per panel: 1 3 6
Connector types available on panel: SC or LC SC or LC SC or LC
Ports per spool assembly: SC=24, LC=48 SC =24, LC=48 24
Panel port capacity: SC=24, LC=48 SC =72, LC=144 144
Payout cable connector types: Singlemode or Mutimode 12-fiber female MPO connectors
Pulling eye pull force: 40 lbs (18.14 kg)
.72" (1.83 cm)
Pulling eye diameter:
2 pulling eyes can be pulled through a 1.1 (2.8 cm) diameter opening
Compliance: UL 1863, NEBS Level 3, GR 1435, GR 326 and GR 409

Maximum cable length shipped on internal spool

Panel Fiber LC SC LC SC
Height Terminations (Indoor Plenum Cable) (Indoor Plenum Cable) (Indoor/Outdoor Riser Cable) (Indoor/Outdoor Riser Cable)

12 200 ft 200 ft 200 ft 200 ft

1 RU 24 100 ft 100 ft 100 ft 100 ft
48 100 ft N/A N/A N/A
72 200 ft 200 ft 100 ft 100 ft
3 RU
144 100 ft 100 ft N/A N/A

4 RU 144 100 ft 100 ft 75 ft 75 ft

Note: P anels ordered with stub lengths listed above or shorter will be stored on the internal spool. For panels ordered with longer stub lengths the difference between the
length ordered and the length above will be stored on a disposable external spool. In these situations the slide-in spool assemblies will ship separately from the chassis
and will need to be installed in thefield.

Rapid Fiber Panel with Internal Slide-In Spool and External

Spool Assemblies (total up to 1000' microcable)

6 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

Typical Central Office/Data Center Application

Shown above is a rendering of a typical Rapid Fiber panel application. Below is an

interconnection diagram that details the application and also highlights some of the available
frame and panel options with MPO connectivity.

Active Equipment Bay

2 Rapid Fiber Panel

ACTIVE
EQUIPMENT
Fiber Jumper
1

Microcable with an MPO Connector 3

Fiber Panel Solution

4 Optical Distribution
Frame (ODF) Solutions

Or

NGF NG3 LSX FDF FPX

7 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

Typical Wireless Connectivity Application

Active Equipment

1 RU Rapid Fiber Panel

Demarcation Box

Backhaul Cabinet

Flexible Fiber Box (FFB) Indoor/Outdoor Cable

3.6 mm indoor/outdoor
cable is used for outside plant
applications.

8 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

1 RU (1.75" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required

Ordering Information

Description Loaded with Cable Type Connector Type Part Number*

48-Position 1RU (1.75")
Panel with MPO connector on far end; chassis contains 1 spool
Singlemode reduced bend radius cable; Two Dual 12-fiber 3.0 mm LC/UPC to MPO RCP-1K4PUExxx00
Chassis: almond plenum-rated cables LC/APC to MPO RCP-1Z4PUExxx00
Multimode 50/125 m laser optimized to Two Dual 12-fiber 3.0 mm
LC to MPO RCPB-1C4PUMxxx00
500 meters (OM4) Chassis: black plenum-rated cables
24-Position 1RU (1.75")
Panel with MPO connector on far end; chassis contains 1 spool
SC/UPC to MPO RCP-172PUExxx00
Dual 12-fiber 3.0 mm
LC/UPC to MPO RCP-1K2PUExxx00
plenum-rated cable
Singlemode reduced bend radius cable; SC/APC to MPO RCP-1J2PUExxx00
Chassis: almond SC/UPC to MPO RCP-172DUExxx00
Dual 12-fiber 3.6 mm
LC/UPC to MPO RCP-1K2DUExxx00
indoor/outdoor-rated cable
SC/APC to MPO RCP-1J2DUExxx00
Multimode 50/125 m laser optimized to Dual 12-fiber 3.0 mm SC to MPO RCPB-1T2PUMxxx00
500 meters (OM4) Chassis: black plenum-rated cable LC to MPO RCPB-1C2PUMxxx00
12-Position 1RU (1.75")
Panel with MPO connector on far end; chassis contains 1 spool
SC/UPC to MPO RCP-171PUExxx00
12-fiber 3.0 mm
LC/UPC to MPO RCP-1K1PUExxx00
plenum-rated cable
Singlemode reduced bend radius cable; SC/APC to MPO RCP-1J1PUExxx00
Chassis: almond SC/UPC to MPO RCP-171DUExxx00
12-fiber 3.6 mm
LC/UPC to MPO RCP-1K1DUExxx00
indoor/outdoor-rated cable
SC/APC to MPO RCP-1J1DUExxx00

* Replace xxx with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-172PUE03100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

1 RU SC/LC
Rapid Spool
Fiber Panel 1 MPO 1 - 12
Spool MPO MPO
1 1 - 12 13 - 24 1.75"
One (1) Spool MPO 13 - 24
per Chassis (Two MPO's per spool)

9 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

3 RU (5.25" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required

Ordering Information
Description Loaded with Cable Type Connector Type Part Number*
72-Position 3RU (5.25")
Panel with MPO connector on far end; chassis contains 3 spools
SC/UPC to MPO RCP-377PUExxx00
Dual 12-fiber 3.0 mm plenum-rated cable
Singlemode reduced bend radius cable; SC/APC to MPO RCP-3J7PUExxx00
Chassis: almond Dual 12-fiber 3.6 mm SC/UPC to MPO RCP-377DUExxx00
indoor/outdoor-rated cable SC/APC to MPO RCP-3J7DUExxx00

Multimode 50/125 m laser

optimized to 500 meters (OM4) Dual 12-fiber 3.0 mm plenum-rated cable SC to MPO RCPB-3T7PUMxxx00
Chassis: black

144-Position 3RU (5.25")

Panel with MPO connector on far end; chassis contains 3 spools
Singlemode reduced bend radius cable; (2) Dual 12-fiber 3.0 mm
LC/UPC to MPO RCP-3KAPUExxx00
Chassis: almond plenum-rated cable per spool
Multimode 50/125 m laser
(2) Dual 12-fiber 3.0 mm
optimized to 500 meters (OM4) LC to MPO RCPB-3CAPUMxxx00
plenum-rated cable per spool
Chassis: black
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-377PUE03100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

3 RU SC Only Spool 1
MPO 1-12
Rapid MPO 13-24
MPO's Spool 2
Fiber Panel
MPO 25-36
Spool 1 1-12 13-24 5.25" 1 72 MPO 37-48
Spool 2 25-36 37-48 Three spools per chassis Spool 3
(two MPO's per spool) MPO 49-60
Spool 3 49-60 61-72 MPO 61-72

Spool 1
MPO 1-12
3 RU LC Only MPO 13-24
MPO 25-36
Rapid MPO 37-48
MPO's Spool 2
Fiber Panel
MPO 49-60
Spool 1 1-12 13-24 25-36 37-48 5.25" 1 144 MPO 61-72
Spool 3 MPO 73-84
Spool 2 49-60 61-72 73-84 37-48 Three spools per chassis
MPO 97-108 MPO 85-96
(four MPO's per spool)
Spool 3 97-108 109-120 121-132 133-144 MPO 109-120
MPO 121-132
MPO 133-144

10 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

4 RU (7" H) Rapid Fiber Panels

Front Rear

3" of rear clearance required

Description Loaded with Cable Type Connector Type Part Number*

144-Position 4RU (7.0")
Panel with MPO connector on far end; chassis contains 6 spools
SC/UPC to MPO RCP-47APUExxx00
Dual 12-fiber 3.0 mm
LC/UPC to MPO RCP-4KAPUExxx00
plenum-rated cable per spool
Singlemode reduced bend radius cable; SC/APC to MPO RCP-4JAPUExxx00
Chassis: almond SC/UPC to MPO RCP-47ADUExxx00
Dual 12-fiber 3.6 mm
LC/UPC to MPO RCP-4KADUExxx00
indoor/outdoor-rated cable per spool
SC/APC to MPO RCP-4JADUExxx00

Multimode 50/125 m laser optimized to Dual 12-fiber 3.0 mm SC to MPO RCPB-4TAPUMxxx00

500 meters (OM4) Chassis: black plenum-rated cable per spool LC to MPO RCPB-4CAPUMxxx00
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-47APUE03100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

4 RU SC/LC Spool 1 Spool 2

Spool 3
MPO 1-12 MPO 25-36
Rapid MPO 13-24 MPO 49-60
MPO's MPO 37-48
Fiber Panel MPO 61-72
Spool 1 1-12 13-24 7" 1 144

Spool 2 25-36 37-48 Six spools per chassis Spool 4

Spool 5
(two MPO's per spool) Spool 6
MPO 97-108 MPO 73-84
Spool 3 49-60 61-72 MPO 121-132 MPO 85-96
MPO 109-120
MPO 133-144
Spool 4 73-84 85-96

Spool 5 97-108 109-120

Spool 6 121-132 133-144

11 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

Ordering information

Description Part Number

NGF Fiber Main Distributing Frame 1

NGF-MDF7A100-30
Dimensions: 2.14 m x 762 mm x 610 mm (7' x 30" x 24")
Maximum fiber capacity: 1,728 (2,304 using LC connectors)

NGF Preterminated Fiber Termination Block (FTB) with MPO Connectors; Capacity: 144

Connector Type Left Block Orientation Right Block Orientation

NGF
SC/UPC Singlemode NGF-MPML07512 NGF-MPMR07512

LC/UPC Singlemode NGF-MPML0K512 NGF-MPMR0K512

SC/APC Singlemode NGF-MPML0L512 NGF-MPMR0L512

MMSC Multimode (aqua). Cable type: OM4 NGF-MPML0T112 NGF-MPMR0T112

MMLC Multimode (aqua). Cable type: OM4 NGF-MPML0C112 NGF-MPMR0C112

NG3 Fiber Main Distributing Frame 2

NG3-MFTWN7A00
Dimensions: 2.14 mm x 762 mm x 610 mm (7" x 30" x 24")
Capacity: 1,440 terminations

NG3 Preterminated Fiber Termination Panel (FTP) with MPO Connectors

NG3 Connector type: SC/UPC Singlemode. Cable type: 72-fiber NG3-TPA700-R

Connector type: LC/UPC Singlemode. Cable type: 72-fiber NG3-TPAK00-R

Connector type: SC/APC Singlemode. Cable type: 72-fiber NG3-TPAL00-R

Connector type: MMLC Multimode (aqua). Cable type: 72-fiber, OM4 NG3-TPAC00-R

Connector type: MMSC Multimode (aqua). Cable type: 72-fiber, OM4 NG3-TPAT00-R

LSX Chassis and MPO Cassette 3

LSX cassette-VAM chassis, unloaded. Height: 9"

FVM-VLM19X900-W
LSX Vertically mounts up to 12 LSX MPO cassettes

LSX MPO cassette. Features (12) SC/UPC connector-style adapter ports LSX-MOD712C

LSX MPO Cassette. Features (12) SC/APC connector-style adapter ports LSX-MODL12C

8" FDF Fiber Main Distributing Frame 4

E-501-L91
Dimensions: 2.14 m x 660 mm x 305 mm (7' x 26" x 12")
Maximum fiber capacity: 1,152 terminations

8" FDF 8" FDF Preterminated Fiber Termination Panels

Connector type: SC/UPC Singlemode. Cable type: 72-fiber FCM-67M000

Connector type: SC/APC Singlemode. Cable type: 72-fiber FCM-6LM000

Connector type: MMSC Multimode (aqua). Cable type: 72-fiber, OM4 FCM-6TM000
1
See page 4 of literature number 103742AE (ODF Catalog) for additional NGF ordering information.
2
See page 32 of document number 103742AE (ODF Catalog) for additional NG3 ordering information.
3
See page 69 of document number 103742AE (ODF Catalog) for additional LSX ordering information.
4
See page 54 of document number 103742AE (ODF Catalog) for additional FDF ordering information.

12 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with MPO Connector

Ordering information

Description Height Part Number

FPX

1 RU empty FPX panel, putty white; accommodates

1 angle LEFT and 1 angle RIGHT adapter packs; 1.75" FPX-1TR000-000
T-handle latch close

2 RU empty FPX panel, putty white; accommodates

2 angle LEFT and 2 angle RIGHT adapter packs; 3.50" FPX-2TR000-000
T-handle latch close

FPX Series Empty Panel; 3 RU empty FPX panel, putty white; accommodates
Termination only rack or 3 angle LEFT and 3 angle RIGHT adapter packs 5.25" FPX-3TR000-000
cabinet mount panel, T-handle latch close
puttywhite 4 RU empty FPX panel, putty white; accommodates
4 angle LEFT and 4 angle RIGHT adapter packs; 7.00" FPX-4TR000-000
T-handle latch close

5 RU empty FPX panel, putty white; accommodates

6 angle LEFT and 6 angle RIGHT adapter packs; 8.75" FPX-5TR000-000
T-handle latch close

Accessories; Blank plates FPX-00AP00

12 fiber FPX cassettes; 12 SC (aqua) Angle LEFT cassette FPX-12MPLQA9

multimode adapters; 50/125 fiber laser
optimized to 300 meters (OM4) Angle RIGHT cassette FPX-12MPRQA9
Multimode MPO
cassettes 24 fiber FPX cassettes; 12 LC (aqua) Angle LEFT cassette FPX-24MPLQA6
multimode adapters1; 50/125 fiber laser
optimized to 300 meters (OM4) Angle RIGHT cassette FPX-24MPRQA6

FPX MPO Cassettes 12 fiber FPX cassettes; 12 SC/UPC Angle LEFT cassette FPX-12MPLS07
singlemode adapters; singlemode fiber Angle RIGHT cassette FPX-12MPRS07

Singlemode 24 fiber FPX cassettes; 12 LC/UPC Angle LEFT cassette FPX-24MPLS08

MPO cassettes singlemode adapters1; singlemode fiber Angle RIGHT cassette FPX-24MPRS08

12 fiber FPX cassettes; 12 SC/APC Angle LEFT cassette FPX-12MPLS0J

singlemode adapters; singlemode fiber Angle RIGHT cassette FPX-12MPRS0J
1
Each LC adapter accepts 2 fiber each
2
See document number 109156AE for additional FPX ordering information.

13 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

The Rapid Fiber panel is available with a dual 12-fiber SC or LC fanout assemblies. Kits are available for securing the fanouts to the rear of
standard optical equipment, such as the NG3 and LSX fiber distribution frame and FPX panel. For easy cable routing and handling, a pull sock is
includedone per each fanout assembly.

Panel shown with Fanout Assembly Panel shown with Pulling Sock Over Fanout
Assembly

Specifications

1 RU (1.75") 3 RU (5.25") 4 RU (7")

Mounting width: 19-inch or 23-inch, EIA or WECO

Recess options: 2, 4 or 5 inches (5.08, 10.16 or 12.7 cm)

Spool assemblies per panel: 1 3 6

Connector types available on panel: SC or LC SC SC or LC

Ports per spool assembly: SC=24, LC=48 24 24

Panel port capacity: SC=24, LC=48 72 144

Payout cable connector types: SC or LC SC or LC SC or LC

Breakout fiber type: 2mm Jacketed

Fanout to connector cable length: 67 (1.70m) other lengths available

Pulling sock pull force: 40 lbs (18.14 kg)

Pulling sock diameter: 2.5" (6.35 cm)

Compliance: UL 1863, NEBS Level 3, GR 1435, GR 326 and GR 409

14 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

Typical Central Office/Data Center Application

Shown above is a rendering of a typical Rapid Fiber panel application. Below is an

interconnection diagram that details the application and also highlights some of the available
frame and panel options with single fiber breakoutconnectivity.

Active Equipment Bay

2 Rapid Fiber Panel

ACTIVE
EQUIPMENT
Fiber Jumper
1

Microcable with Single Fiber Breakout 3

4 Optical Distribution Frame (ODF) Solutions

NG3 LSX FDF

15 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

1 RU (1.75" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required

Ordering Information

Description Connector Type Part Number

24-Position 1RU (1.75") Panel with 2mm single fiber breakouts on far end; chassis contains 1 spool
SC/UPC at panel end with SC/UPC on far end RCP-172PU7xxxyy
SC/UPC at panel end with SC/APC on far end RCP-172PUJxxxyy
SC/UPC at panel end with LC/UPC on far end RCP-172PUKxxxyy
Loaded with dual 12-fiber 3.0 mm plenum-rated, SC/APC at panel end with SC/UPC on far end RCP-1J2PU7xxxyy
singlemode reduced bend radius cable
SC/APC at panel end with SC/APC on far end RCP-1J2PUJxxxyy
Chassis: almond SC/APC at panel end with LC/UPC on far end RCP-1J2PUKxxxyy
LC/UPC at panel end with SC/UPC on far end RCP-1K2PU7xxxyy
LC/UPC at panel end with SC/APC on far end RCP-1K2PUJxxxyy
LC/UPC at panel end with LC/UPC on far end RCP-1K2PUKxxxyy
48-Position 1RU (1.75")
Panel with 2mm single fiber breakouts on far end; chassis contains 1 spool
Loaded with two dual 12-fiber 3.0 mm plenum-rated, LC/UPC at panel end with LC/UPC on far end RCP-1K4PUKxxxyy
singlemode reduced bend radius cable.
Chassis: almond LC/APC at panel end with LC/APC on far end RCP-1Z4PUZxxxyy

* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-172PU703167).
Replace yy with desired single-fiber breakout length in inches: 25, 39, 45, and 67 available.
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

1 RU SC/LC
Rapid Spool
Fiber Panel 1 Fibers 1 - 12
Spool Fibers Fibers
1.75"
1 1 - 12 13 - 24
One (1) Spool Fibers 13 - 24
per Chassis (Two fanouts per spool)

12-Fiber Breakout shown with 2mm

SC/UPC Connectors

16 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

3 RU (5.25" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required
Ordering Information
Description Connector Type Part Number
72-Position 3RU (5.25")
Panel with 2mm single fiber breakouts on far end; chassis contains 3 spools
SC/UPC at panel end with SC/UPC on far end RCP-377PU7xxx67
SC/UPC at panel end with SC/APC on far end RCP-377PUJxxx67
Loaded with dual 12-fiber 3.0 mm plenum-rated,
singlemode reduced bend radius cable per spool SC/UPC at panel end with LC/UPC on far end RCP-377PUKxxx67
SC/APC at panel end with SC/UPC on far end RCP-3J7PU7xxx67
Chassis: almond
SC/APC at panel end with SC/APC on far end RCP-3J7PUJxxx67
SC/APC at panel end with LC/UPC on far end RCP-3J7PUKxxx67
144-Position 3RU (5.25")
Panel with 2mm single fiber breakouts on far end;
chassis contains 3 spools
Loaded with (2) dual 12-fiber 3.0 mm plenum-rated, LC/UPC at panel end with SC/UPC on far end RCP-3KAPU7xxx67
singlemode reduced bend radius cable per spool
LC/UPC at panel end with SC/APC on far end RCP-3KAPUJxxx67
Chassis: almond LC/UPC at panel end with LC/UPC on far end RCP-3KAPUKxxx67
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-377PU703167).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

3 RU SC Only Spool 1
Fibers 1-12
Rapid Fibers 13-24
Fibers Spool 2
Fiber Panel Fibers 25-36
5.25" 1 Fibers 37-48
Spool 1 1-12 13-24 72
Three spools per chassis Spool 3
Spool 2 25-36 37-48 Fibers 49-60
(two fanouts per spool)
Fibers 61-72
Spool 3 49-60 61-72

Spool 1
3 RU LC Only Fibers 1-12
Fibers 13-24
Fibers 25-36
Fibers Rapid Fibers 37-48 Spool 2
Fiber Panel
Spool 1 1-12 13-24 25-36 37-48 Fibers 49-60
5.25" 1 Fibers 61-72
144
Spool 2 49-60 61-72 73-84 37-48 Spool 3 Fibers 73-84
Three spools per chassis
Fibers 97-108 Fibers 85-96
(four fanouts per spool)
Spool 3 97-108 109-120 121-132 133-144 Fibers 109-120
Fibers 121-132
Fibers 133-144

17 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

4 RU (7" H) Rapid Fiber Panels

Front Rear

3" of rear clearance required

Ordering Information

Description Connector Type Part Number

144-Position 4RU (7.0") Panel with 2mm single fiber breakouts on far end; chassis contains 6 spools

SC/UPC at panel end with SC/UPC on far end RCP-47APU7xxx67

SC/UPC at panel end with SC/APC on far end RCP-47APUJxxx67

SC/UPC at panel end with LC/UPC on far end RCP-47APUKxxx67

Loaded with dual 12-fiber 3.0 mm plenum-rated, SC/APC at panel end with SC/UPC on far end RCP-4JAPU7xxx67
singlemode reduced bend radius cable per spool
SC/APC at panel end with SC/APC on far end RCP-4JAPUJxxx67
Chassis: almond SC/APC at panel end with LC/UPC on far end RCP-4JAPUKxxx67

LC/UPC at panel end with SC/UPC on far end RCP-4KAPU7xxx67

LC/UPC at panel end with SC/APC on far end RCP-4KAPUJxxx67

LC/UPC at panel end with LC/UPC on far end RCP-4KAPUKxxx67

* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-47APU703167).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

4 RU SC Only Spool 1 Spool 2 Spool 3

Fiber 1-12 Fibers 25-36 Fibers 49-60
Fibers Rapid Fibers 13-24 Fibers 37-48 Fibers 61-72
Fiber Panel
Spool 1 1-12 13-24 1
7" 144
Spool 2 25-36 37-48 Six spools per chassis Spool 4
Spool 6 Spool 5
(two fanouts per spool) Fibers 97-108 Fibers 73-84
Spool 3 49-60 61-72 Fibers 121-132
Fibers 109-120 Fibers 85-96
Fibers 133-144
Spool 4 73-84 85-96

Spool 5 97-108 109-120

Spool 6 121-132 133-144

18 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Single Fiber Breakouts

Frame Fanout Mounting Brackets

NG3 Fanout Bracket LSX Fanout Bracket FDF Fanout Bracket

Description* Part Number

NG3 Bracket
Bracket for attaching fanouts to standard NG3 panels (included with 67 NG3-ACCMPOBKT
single fiber breakout panels)

LSX Bracket
LSX-ACC036
Bracket for attaching fanouts to standard 7" high LSX panels

8" FDF Bracket

FDF-ACC378
Bracket for attaching fanouts to standard 8" high FDF panels

EIA/WECO Bracket
RCP-ACCFANOUTBKT
Bracket for attaching fanouts to Network or UEF style racks

*Rapid Fiber panels with fanouts do not include fanout mounting brackets.
Note: Fanout mounting brackets generally attach to the panels cable clamp mounting location.

19 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Stub and Pulling Eye

Specifications
1 RU (1.75") 3 RU (5.25") 4 RU (7")

Mounting width: 19-inch or 23-inch, EIA or WECO

Recess options: 2, 4 or 5 inches (5.08, 10.16 or 12.7 cm)

Spool assemblies per panel: 1 3 6

Connector types available on panel: SC or LC SC or LC SC or LC

Ports per spool assembly: SC=24, LC=48 SC =24, LC=48 24

Panel port capacity: SC=24, LC=48 SC =72, LC=144 144

Payout cable connector types: Singlemode or Mutimode 12-fiber female MPO connectors

Pulling eye pull force: 40 lbs (18.14 kg)

.72" (1.83 cm)

Pulling eye diameter:
2 pulling eyes can be pulled through a 1.1 (2.8 cm) diameter opening

Compliance: UL 1863, NEBS Level 3, GR 1435, GR 326 and GR 409

Maximum cable length shipped on internal spool

Panel Fiber LC SC LC SC
Height Terminations (Indoor Plenum Cable) (Indoor Plenum Cable) (Indoor/Outdoor Riser Cable) (Indoor/Outdoor Riser Cable)

12 200 ft 200 ft 200 ft 200 ft

1 RU
24 100 ft 100 ft 100 ft 100 ft

72 200 ft 200 ft 100 ft 100 ft

3 RU
144 100 ft 100 ft NA NA

4 RU 144 100 ft 100 ft 75 ft 75 ft

Note: P anels ordered with stub lengths listed above or shorter will be stored on the internal spool. For panels ordered with longer stub lengths the
difference between the length ordered and the length above will be stored on a disposable external spool. In these situations the slide-in spool
assemblies will ship separately from the chassis and will need to be installed in thefield.

Rapid Fiber Panel with Internal Slide-In Spool and Pulling Eye for Rapid Fiber Panels
External Spool Assemblies with Stub Configuration
(total up to 1000' microcable)

20 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Stub and Pulling Eye

Typical Central Office/Data Center Application

Shown above is a rendering of a typical Rapid Fiber panel application. Below is an

interconnection diagram that details the application and also highlights some of the available
frame and panel options with splice capabilties.

Active Equipment Bay

2 Rapid Fiber Panel

ACTIVE
EQUIPMENT
Fiber Jumper
1

Microcable with Stub End 3

4 Splice Solutions

FOSC FEC OMX

Splice Frame

21 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Stub and Pulling Eye

1 RU (1.75" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required

Ordering Information
Description Loaded with Cable Type Connector Type Part Number*
48-Position 1RU (1.75")
Panel with stub and pulling eye on far end; chassis contains 1 spool

Singlemode reduced bend radius cable; Two Dual 12-fiber 3.0mm plenum- LC/UPC to Stub RCP-1K4PU0xxx00
Chassis: almond rated cables LC/APC to Stub RCP-1Z4PU0xxx00
Multimode 50/125 m laser optimized to
Two Dual 12-fiber 3.0mm plenum-
500 meters (OM4) LC to Stub RCPB-1C4PU0xxx00
rated cables
Chassis: black
24-Position 1RU (1.75")
Panel with stub and pulling eye on far end; chassis contains 1 spool
SC/UPC to Stub RCP-172PU0xxx00
Dual 12-fiber 3.0 mm plenum-
LC/UPC to Stub RCP-1K2PU0xxx00
rated cable
Singlemode reduced bend radius cable; SC/APC to Stub RCP-1J2PU0xxx00
Chassis: almond SC/UPC to Stub RCP-172DU0xxx00
Dual 12-fiber 3.6 mm
LC/UPC to Stub RCP-1K2DU0xxx00
indoor/outdoor-rated cable
SC/APC to Stub RCP-1J2DU0xxx00
Multimode 50/125 m laser SC to Stub RCPB-1T2PU0xxx00
Dual 12-fiber 3.0 mm plenum-
optimized to 500 meters (OM4)
rated cable LC to Stub RCPB-1C2PU0xxx00
Chassis: black
12-Position 1RU (1.75")
Panel with stub and pulling eye on far end;chassis contains 1 spool
SC/UPC to Stub RCP-171DU0xxx00
Singlemode reduced bend radius cable; 12-fiber 3.6 mm
LC/UPC to Stub RCP-1K1DU0xxx00
Chassis: almond indoor/outdoor-rated cable
SC/APC to Stub RCP-1J1DU0xxx00
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-172PU003100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

1 RU SC/LC
Rapid Spool
Fiber Panel 1 Fibers 1 - 12
Spool Fibers Fibers
1 1 - 12 13 - 24 1.75"
One (1) Spool Fibers 13 - 24
per Chassis (Two pulling eyes per spool)

22 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Stub and Pulling Eye

3 RU (5.25" H) Rapid Fiber Panels

Front Rear

3" of rear clearance required

Ordering Information
Description Loaded with Cable Type Connector Type Part Number*
72-Position 3RU (5.25") Panel with stub and pulling eye on far end; chassis contains 3 spools
SC/UPC to Stub RCP-377PU0xxx00
Dual 12-fiber 3.0 mm plenum-rated cable
Singlemode reduced bend radius cable; SC/APC to Stub RCP-3J7PU0xxx00
Chassis: almond SC/UPC to Stub RCP-377DU0xxx00
Dual 12-fiber 3.6 mm
indoor/outdoor-rated cable SC/APC to Stub RCP-3J7DU0xxx00
Multimode 50/125 m laser
optimized to 500 meters (OM4) Dual 12-fiber 3.0 mm plenum-rated cable SC to Stub RCPB-3T7PU0xxx00
Chassis: black
144-Position 3RU (5.25") Panel with stub and pulling eye on far end; chassis contains 3 spool
(2) Dual 12-fiber 3.0 mm
LC/UPC to Stub RCP-3KAPU0xxx00
Singlemode reduced bend radius cable; plenum-rated cable per spool
Chassis: almond (2) Dual 12-fiber 3.6 mm
LC/UPC to Stub RCP-3KADU0xxx00
indoor/outdoor-rated cable per spool
Multimode 50/125 m laser
(2) Dual 12-fiber 3.0 mm
optimized to 500 meters (OM4) LC to Stub RCPB-3CAPU0xxx00
plenum-rated cable per spool
Chassis: black
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-377PU003100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

3 RU SC Only Spool 1
Fibers 1-12
Fibers Rapid Fibers 13-24
Spool 2
Fiber Panel
Fibers 25-36
Spool 1 1-12 13-24 5.25" 1
72 Fibers 37-48
Spool 2 25-36 37-48 Three spools per chassis Spool 3
(two pulling eyes per spool) Fibers 49-60
Spool 3 49-60 61-72 Fibers 61-72

Spool 1
3 RU LC Only Fibers 1-12
Fibers 13-24
Fibers 25-36
Fibers Fibers 37-48
Rapid Spool 2
Fiber Panel Fibers 49-60
Spool 1 1-12 13-24 25-36 37-48
5.25" 1 144 Fibers 61-72
Spool 2 49-60 61-72 73-84 37-48 Spool 3 Fibers 73-84
Three spools per chassis
Fibers 97-108 Fibers 85-96
(four pulling eyes per spool)
Spool 3 97-108 109-120 121-132 133-144 Fibers 109-120
Fibers 121-132
Fibers 133-144

23 For more information, visit commscope.com

Rapid Fiber Panel Series
Fiber Termination Panels with Stub and Pulling Eye

4 RU (7" H) Rapid Fiber Panels

Front Rear
3" of rear clearance required

Description Loaded with Cable Type Connector Type Part Number*

144-Position 4RU (7.0")

Panel with stub and pulling eye on far end;

chassis contains 6 spools

SC/UPC to Stub RCP-47APU0xxx00

Dual 12-fiber 3.0 mm
LC/UPC to Stub RCP-4KAPU0xxx00
plenum-rated cable per spool
Singlemode reduced bend radius cable; SC/APC to Stub RCP-4JAPU0xxx00
Chassis: almond
SC/UPC to Stub RCP-47ADU0xxx00
Dual 12-fiber 3.6 mm
LC/UPC to Stub RCP-4KADU0xxx00
indoor/outdoor-rated cable per spool
SC/APC to Stub RCP-4JADU0xxx00

Multimode 50/125 m laser optimized Dual 12-fiber 3.0 mm SC to Stub RCPB-4TAPU0xxx00

to 500 meters (OM4) Chassis: black plenum-rated cable per spool LC to Stub RCPB-4CAPU0xxx00
* Replace 'xxx' with standard length: 031=100ft (31m) or 061=200ft (61m) (ex: RCP-47APU003100).
Additional cable lengths (in 100ft increments) are available; contact CommScope for assistance.

4 RU SC/LC
Spool 1 Spool 2 Spool 3
Fiber 1-12 Fibers 25-36
Fibers Fibers 49-60
Rapid Fibers 13-24 Fibers 37-48 Fibers 61-72
Fiber Panel
Spool 1 1-12 13-24 1
7" 144
Spool 2 25-36 37-48 Six spools per chassis Spool 5 Spool 4
Spool 6
(two pulling eyes per spool) Fibers 97-108 Fibers 73-84
Spool 3 49-60 61-72 Fibers 121-132
Fibers 109-120 Fibers 85-96
Fibers 133-144
Spool 4 73-84 85-96

Spool 5 97-108 109-120

Spool 6 121-132 133-144

24 For more information, visit commscope.com

Rapid Fiber Panel Series
Accessories

Fiber Inspection Kit

Ordering Information

Product Description Image Quantity Part Number

Optical Fiber Inspection and Cleaning Kit for Standard Connector Styles (LC, SC, ST, FC), MT-RJ, and MPO.

Kit includes everything needed to perform routine fiber maintenance and troubleshooting - including cleaning A 1 2064651-1
tools, an inspection microscope, a visual fault locator, and a CD-ROM with detailed inspection, cleaning
instructions and a rugged carrying case. Kit components:

Visual Fault Locator (VFL)) with 1.25 mm Adapter B 1 1828352-2

200x Microscope with 2.5 mm Adapter C 1 1754767-1

1.25 mm (LC) Microscope Adapter D 1 1754765-1

MT-RJ Microscope Adapter E 1 1754768-1

MPOA Microscope Adapter F 1 1828837-1

MPO Microscope Adapter G 1 1828836-1

Termination Training, CD-ROM H 1 2064710-1

2.5 mm Stick Cleaners (10/package) I 5 1918807-1

1.25 mm Stick Cleaners (10/package) J 5 1918808-1

One Slot Reel Cleaner K 1 1918803-1

MT-RJ with pins Reel Cleaner L 1 1918804-1

SC in Bulkhead Cleaner (IBC) M 1 2064499-1

LC IBC N 1 2064500-1

MPO IBC O 1 1918809-1

Premium Hard Case P 1 TBD

25 For more information, visit commscope.com

Rapid Fiber Panel Series
Specifications

3mm 24-Fiber Zip Plenum Rated Microcable

Specifications
Plenum PVC
Jacket Color
3 mm Aramid yarn strength
Singlemode Plenum Rated: Ivory members

Multimode OM4: Aqua

Environmental 12x 250 m acrylate
coated fibers
Storage temperature: -40 to 70 C (-40 to 158 F)
Operating temperature: 0 to 70 C (32 to 158 F)
Installation temperature: 0 to 50 C (32 to 122 F)
Mechanical
Number of Fibers: 24
Maximum tensile load
Short term: 660 N (150 lbf)
Long term: 200 N (45 lbf)
Minimum bend radius
Installed: 30 mm (1.18")
Loaded: 60 mm (2.36")
Maximum compression: 10 N/mm (57 lbf/in)
Maximum impact: 2.94 Nm (2.17 lbfft)
Optical Performance
Maximum attenuation Typical attenuation Guaranteed minimum
(dB/km) (dB/km) bandwidth (MHz/km) 1310
1310 nm/1550 nm 1310 nm/1550 nm nm/1550 nm

Singlemode reduced bend radius1 1.0/1.0 0.4/0.3 N/A

Transmission Performance Guaranteed

Fast Ethernet Gigabit Ethernet 10 Gigabit Ethernet
100 Mbps 1 Gbps 10 Gbps
1310 nm/1550 nm 1310 nm/1550 nm 1310 nm/1550 nm

Singlemode reduced bend radius 2 km/NA 5 km/NA 10 km/40 km

Compliances

Telcordia GR-409-CORE Interconnect Category,

-- Impact and compression compliant to horizontal and vertical backbone cable requirements
-- Tensile compliant to horizontal backbone cable requirements
UL 910 plenum flammability rating
EIA/TIA FOTPS
EIA/TIA 568-B
NFPA 262, NEC OFNP, FT-6
Restriction of the use of hazardous substances. RoHS (2002/95/EC)
Comply with California Prop 65 for Safe Drinking and Toxic Enforcement Act
1
Reduced Bend Radius Fiber is compliant to ITU-T G.652.D, ITU-T G.657A&B, and IEC 60793-2-50 Type B.1.3

26 For more information, visit commscope.com

Rapid Fiber Panel Series
Specifications

3.6 mm 12-Fiber Indoor/Outdoor Singlemode Microcable

Specifications
LSZH Outer Jacket
Environmental Aramid yarn strength
members
Operating temperature: -40 to 75 C (-40 to 1678 F) 3.6 mm Water swellable member
Installation temperature: -30 to 50 C (-22 to 122 F) Acrylate coated fibers

Mechanical

Number of Fibers: 12

Maximum tensile load (lbf)

Short term: 220 (50 )

Long term: 110 (25)

Minimum bend radius (in.)

Installed: 36 mm (1.4")

Loaded: 54 mm (2.1")

Optical Performance

Maximum attenuation Typical attenuation Guaranteed minimum

(dB/km) (dB/km) bandwidth (MHz/km) 1310
1310 nm/1550 nm 1310 nm/1550 nm nm/1550 nm

Singlemode reduced bend radius1 1.0/1.0 0.4/0.3 N/A

Transmission Performance Guaranteed

Fast Ethernet Gigabit Ethernet 10 Gigabit Ethernet

100 Mbps 1 Gbps 10 Gbps

Singlemode reduced bend radius1 2 km/NA 5 km/NA 10 km/40 km

Compliances

Restriction of the use of hazardous substances RoHS (2002/95/EC)

Comply with California Prop 65 for Safe Drinking and Toxic Enforcement Act

Telcordia GR-20 tested to relevant specifications

Telcordia GR-409-CORE, EIA/TIA FOTPS (Independently verified)

ISO/IEC 11801, IEC 60794-2 Optical Fiber Cables Part 2

EIA/TIA 568-B

(UL) 1666, NEC OFNR (Riser Rated), FT-4

1
Reduced Bend Radius Fiber allows the minimum bend radius to be cut in half and is compliant to ITUT G.652.D, ITU-T G.657A&B, and IEC 60793-2-50 Type B.1.3

27 For more information, visit commscope.com

www.commscope.com
Visit our website or contact your local CommScope representative for more information.

2016 CommScope, Inc. All rights reserved.

All trademarks identified by or are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any specifications or
warranties relating to CommScope products or services.
CA-310111.7-AE (03/16)