SILCOLEASE release coatings
Emulsion Range
Bluestar Silicones. Delivering Your Potential.
n Global range of polyaddition
curing emulsion systems
Silcolease products - POLYMERS Silcolease products - CATALYSTS
Product reference Features Product reference Features
Emulsion 902 nB ase for multi purpose 2 component system Emulsion CATA 903 n Standard Platinum catalyst
n Good cure & anchorage n Stability additive
n Low release
Emulsion 908 Emulsion CATA 909 n Concentrated Platinum catalyst
nB ase for high density network 2 component
system n Longer shelf life
n Good cure & anchorage
Emulsion CATA 911* nL ower Platinum concentration catalyst for
n Low foaming/high bath stability
easy use (50:50 system)
n Excellent bakery release
n Stability additive
Emulsion 915 nB ase for high density network 2 component
system
n Good cure & anchorage
n Low foaming/high bath stability
n Excellent bakery release Silcolease products - ADDITIVES
n Improved water resistance coating
Product reference Features
Emulsion 907 nB ase for multi purpose 3 component system
n Good cure & anchorage Emulsion RCA 954 nT
ight release modifier suitable for
n Low release a wide range of adhesives
n Longer shelf life
Emulsion 912 nB ase for multi purpose 2 component system Emulsion ADD 702 nR heology modifier
n Optima concept nR educes silicone penetration & consumption
n Lower catalyst level or faster cure n Improves bath stability
n Low release
Emulsion 700 n Latex-Silicone co-polymer
Emulsion 904* nB ase for multi purpose 2 component system n Improves holdout on porous papers
(manufactured in LATAM) n Good cure & anchorage n Suitable for very tight release applications
n Low release (e.g. Masking tapes)
Silcolease products - CROSSLINKERS
Product reference Features
Emulsion XL 966 n Standard crosslinker
n Good anchorage
n4 0% solids emulsion with excellent physical
bath stability
Emulsion XL 969 n Standard crosslinker
n Good anchorage
n6 0% solids emulsion with excellent wetting
properties
Emulsion XL 968 n Optima concept
n High reactivity crosslinker
nL ower catalyst level or faster cure
n4 0% solids emulsion with excellent physical
bath stability
* Product not available in all zones (discuss availability
with your technical or sales contact)
n North American range
of polyaddition curing emulsion systems
Silcolease products - POLYMERS Silcolease products - CROSSLINKERS
Product reference Features Product reference Features
PC-105 NXL n Base for multi purpose 3 component system PC-31 nC
rosslinker that provides fastest cure
n Good cure and anchorage
n Low release PC-50 nC
rosslinker that provides balance of cure
and anchorage
PC-107 n Base for high density network
2 component system PC-868 n Crosslinker that provides excellent
n Good cure and anchorage anchorage against difficult substrates
n Low release for roll label applications
PC-107 NXL n Base for multi purpose 3 component system
n Good cure and anchorage Silcolease products - CATALYSTS
n Low release for roll label applications
Product reference Features
PC-188 NXL n Base for high density network
3 component system PC-95 nS
tandard Platinum catalyst
n Good cure and anchorage
n Low foaming/high bath stability
n Excellent for bakery release
PC-188 nB
ase for high density network Silcolease products - ADDITIVES
2 component system
nG
ood cure and anchorage Product reference Features
nL
ow foaming/high bath stability
nE
xcellent for bakery release PC-191 nT
ight release modifier
PC-195 NXL nT
ight release modifier suitable for
a wide range of adhesives
The SILCOLEASE emulsion technology range offers PC-197 nV
ery tight release options with both rubber
unique benefits for certain applications and is the only and acrylic adhesives
choice for paper machine application of a silicone release Emulsion 700 nS ilicone-grafted latex emulsion
n Improves holdout on porous papers
coating. SILCOLEASE emulsion products are adapted
n Suitable for very tight release applications
to both size press or bill blade type coating heads. Equally, (e.g. Masking tapes)
simple coating techniques such as those used for solvent HA-1 nR heology modifier
based silicones can be adapted for emulsion coating with nR educes silicone penetration
n Improves bath stability
attention to wetting properties, solids levels and suitable
thickening agents.
Continuous improvements in bath stability have been
made which allow these systems to run with amazing Silicone release coatings are widely used in the roll label
consistency and reliability over long production campaigns. and tape industry but emulsion silicones are particularly
used in applications such as bakery, hygiene, interleaving
The cure speed of an emulsion system is very much and high pressure laminate release applications.
defined by the evaporation of the diluting water. However, Bluestar Silicones long history of success with emulsion
recent advances in our curing technology have allowed technology is particularly due to our ability to adapt and
us to apply the SILCOLEASE Optima concept to our
modify formulations to all machine conditions. The use of
emulsion range. In particular, with these new products, our water soluble organic polymers can be a critical factor to
customers can obtain a release coating with significantly aid successful coating with emulsion silicones particularly
reduced Platinum levels on certain suitable substrates. on more porous or lower cost substrates.
n European polycondensation
curing emulsion system
Silcolease products
Product reference Features
Emulsion 70840 n Base for multi purpose 2 component system
n Good performance on Pt cure inhibiting substrates
n Low release (particularly against certain adhesives)
Emulsion catalyst n Standard dibutyl tin catalyst
70827A* n Industrial applications only (no food contact approval)
* Regulatory changes will gradually lead to phasing
out of all tin catalysts by 2015 in Europe
pemaco - Photos: Cover: Tetra Images / GraphicObsession - PaulPaladin / Shutterstock. Inside: Aaron Amat / Shutterstock
n North American
polycondensation
curing emulsion system
Silcolease products
Product reference Features
PC-168 n Base for multi purpose 2 component system
n Good performance on Pt cure inhibiting substrates
n Low release (particularly against certain adhesives)
n Fast cure with low post cure extractables
PC-94 n Standard tin catalyst
n Not for food contact applications
SIL 11 001 3-2 Emulsion
For detailed commercial contacts please visit our website:
www.bluestarsilicones.com
The information contained in this document is given in good faith and based on Bluestar Silicones current knowledge.
Bluestar Silicones makes no representation or warranty as to the accuracy, completeness of such information or as
to the compatibility of such information with the users intended application : information is supplied on an as-is basis
and is not binding on Bluestar Silicones. Nothing contained herein is intended as a recommendation to use the products
so as to infringe any patent.
Bluestar Silicones assumes no liability for users violation of patent or other rights and disclaims any liability for loss, injury
or damage which may result from the use of the products. Therefore, information contained herein must not be used as a
substitute for necessary prior tests which are the sole responsibility of the user and which alone can ensure that a product
is suitable for a given use.
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel : +33 (0)4 72 13 19 00 - Fax : +33 (0)4 72 13 19 88
