Packet Tracer Skills Integration Challenge
Topology
Addressing Table
Device Interface IP Address Subnet Mask Default Gateway
S1 VLAN 88 [Link] [Link] [Link]
S2 VLAN 88 [Link] [Link] [Link]
S3 VLAN 88 [Link] [Link] [Link]
PC1 NIC [Link] [Link] [Link]
PC2 NIC [Link] [Link] [Link]
PC3 NIC [Link] [Link] [Link]
PC4 NIC [Link] [Link] [Link]
PC5 NIC [Link] [Link] [Link]
PC6 NIC [Link] [Link] [Link]
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 2
Packet Tracer Skills Integration Challenge
VLANs and Port Assignment Table
Ports Assignment Network
F0/7 - 12 VLAN 10 - Sales [Link]/24
F0/13 -20 VLAN 20 - Production [Link]/24
F0/1 - 6 VLAN 30 - Marketing [Link]/24
Interface VLAN 88 VLAN 88 - Management [Link]/24
Trunks VLAN 99 - Native N/A
Scenario
In this activity, two switches are completely configured. On a third switch, you are responsible for assigning IP
addressing to the Switch Virtual Interface, configuring VLANs, assigning VLANs to interfaces, configuring
trunking, and performing basic switch security.
Requirements
S1 and S2 are fully configured. You cannot access these switches. You are responsible for configuring S3
with the following requirements:
IP addressing and default gateway configuration, according to the Addressing Table.
Create, name, and assign VLANs according to the VLANs and Port Assignment Table.
Assign the native VLAN 99 to the trunk port and disable DTP.
Restrict the trunk to only allow VLANs 10, 20, 30, 88, and 99.
Use VLAN 99 as the native VLAN on the trunk ports.
Configure basic switch security on S3.
- Encrypted secret password of itsasecret
- Console password of letmein
- VTY password of c1$c0 (where 0 is the number zero)
- Encrypted plain text passwords
- MOTD banner with the message Authorized Access Only!!
- Disable unused ports.
Configure port security on F0/6.
- Only two unique devices are allowed to access the port.
- Learned MACs are added to the running configuration.
- Secure the interface so that a notification is sent when there is a violation, but the port is not disabled.
Verify the PCs in the same VLAN can now ping each other.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 2
