Scribd
Upload
386 views3 pages

Individual Assignment Sem 2 20162017

This document provides instructions for a 3 question AutoCAD assignment due in Week 9. Question 1 involves redrawing an object in Figure 1 with specified layers and dimensions. Question 2 requires drawing the first angle projection views of the object in Figure 2. Question 3 asks to draw the isometric view of the object in Figure 3. All drawings must include title blocks and be printed and submitted in A4 size.

Uploaded by

Anis Nabila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
386 views3 pages

Individual Assignment Sem 2 20162017

This document provides instructions for a 3 question AutoCAD assignment due in Week 9. Question 1 involves redrawing an object in Figure 1 with specified layers and dimensions. Question 2 requires drawing the first angle projection views of the object in Figure 2. Question 3 asks to draw the isometric view of the object in Figure 3. All drawings must include title blocks and be printed and submitted in A4 size.

Uploaded by

Anis Nabila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Faculty of Civil and Environmental Engineering Page Number 1 From 3

BFC 10303: Engineering Drawing And CAD Edition 1


Assesment: Individual Assignment (15%) Date: Feb 2017
Topic: Using AutoCAD Level 1 Due Date Week 9 (16/4/2017)

This Assignment consist of THREE (3) questions. Please answer ALL questions. All dimensions are
in millimeter (mm).

Question 1:

a. Redraw the object below (Figure 1) and all dimensions should be displayed
b. Drawing limits : A4 Size
c. Layers and color lines: BLUE (object), GREEN (dimension) and GREY (extension
lines).
d. Insert title block (TBLOCK file) into this objects.
e. Print and submit the drawing in A4 size

Figure 1
Faculty of Civil and Environmental Engineering Page Number 2 From 3
BFC 10303: Engineering Drawing And CAD Edition 1
Assesment: Individual Assignment (15%) Date: March 2017
Topic: Orthographic Projection Due Date Week 9 (16/4/2017)

Question 2 :

a. Figure 2 shows an isometric view of a roller rest bracket. Draw with full size the
views of the block in FIRST ANGLE PROJECTION:
i. Plan looking from the top of the block
ii. Front elevation looking from A.
iii. Side elevation looking from B.
b. All hidden items must be shown.
c. Drawing limits : A4 Size
d. Layers and color lines: BLUE (object), GREEN (dimension) and GREY (extension
lines).
e. Insert title block (TBLOCK file) into this objects.
f. Print and submit the drawing in A4 size

B
A
Figure 2
Faculty of Civil and Environmental Engineering Page Number 3 From 3
BFC 10303: Engineering Drawing And CAD Edition 1
Assesment: Individual Assignment (15%) Date: April 2017
Topic: Isometric View Due Date Week 9 (16/4/2017)

Question 3 :

a. Figure 3 shows an autographic projection view of a shaft support. Draw with full size
the views of the block in ISOMETRIC VIEW.
b. All hidden items must be shown.
c. Drawing limits : A4 Size
d. Layers and color lines: BLUE (object), GREEN (dimension) and GREY (extension
lines).
e. Insert title block (TBLOCK file) into this object.
f. Print and submit the drawing in A4 size

Figure 3

You might also like