Scribd
Upload
119 views2 pages

Handling The UniOP SSFDC Memory Cards

The document provides handling instructions for SSFDC memory cards used in UniOP products. It states that the memory cards must be carefully cleaned before insertion to remove any contaminants from the golden contacts. Contamination or acid chemicals could damage the contacts and cause electrical issues. The memory cards should be cleaned with a soft, clean tissue and kept in an antistatic case when removed from the slot.

Uploaded by

zvonkomihajlovic4891
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views2 pages

Handling The UniOP SSFDC Memory Cards

The document provides handling instructions for SSFDC memory cards used in UniOP products. It states that the memory cards must be carefully cleaned before insertion to remove any contaminants from the golden contacts. Contamination or acid chemicals could damage the contacts and cause electrical issues. The memory cards should be cleaned with a soft, clean tissue and kept in an antistatic case when removed from the slot.

Uploaded by

zvonkomihajlovic4891
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tech-note

PN# tn160-1.doc - 5/8/01 - Ver. 1.01

Handling the UniOP SSFDC Memory Cards

This documents describes how to handle the SSFDC Memory Cards used in the UniOP products in
order to ensure the proper operation of the memory media.

Contents
1. Handling the memory card....................................................................................2

Page 1
Tech-note
PN# tn160-1.doc - 5/8/01 - Ver. 1.01

1. Handling the Memory Cards

The SSFDC memory cards used in the UniOP operator panels (limited to models with firmware type
38 and firmware type 58) need to be handled with care when replaced in the memory slot of the panel.

Figure 1
Before inserting the memory card in its slot in the panel, the contact area must be carefully cleaned.
Any track of contaminants such as oil or any greasy substances should be carefully removed.

Contamination on the golden contacts of the memory card, at the moment the media is inserted in the
slot, may generate an insulating layer that may result in electrical contact problems with the sliding
elements of the socket.

Acid chemicals may permanently damage the memory card golden surface. Any contact with acid
substances must be carefully avoided.

To ensure the proper operation of the memory media the contact surface of the SSFDC card should be
cleaned with a soft, clean tissue.

Note: the use of any synthetic cloth could permanently damage the memory card due to electrostatic
discharge.

Direct contact with the human body (fingers) with the contact area should be carefully avoided.

In case the memory card needs to be removed from the slot and carried around, it has to be kept in a
special antistatic protective case.

Page 2

You might also like