Scribd
Upload
305 views1 page

Window Ac Test Rig

The document describes a window air conditioning test rig unit that is used to conduct experiments and demonstrate the process of cooling atmospheric air. The unit will be fitted with instruments to measure temperature, pressure, and other points in the air conditioning system. The test rig allows users to study the vapor compression air conditioning cycle and calculate the coefficient of performance using a P-H diagram. It requires a single phase, 220V AC power supply and takes up a floor area of 2m x 1m. The technical details list the components included, such as a 1-ton hermetically sealed compressor, air-cooled condenser, evaporator, and safety controls. An instruction manual is also provided.

Uploaded by

Virender Rana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
305 views1 page

Window Ac Test Rig

The document describes a window air conditioning test rig unit that is used to conduct experiments and demonstrate the process of cooling atmospheric air. The unit will be fitted with instruments to measure temperature, pressure, and other points in the air conditioning system. The test rig allows users to study the vapor compression air conditioning cycle and calculate the coefficient of performance using a P-H diagram. It requires a single phase, 220V AC power supply and takes up a floor area of 2m x 1m. The technical details list the components included, such as a 1-ton hermetically sealed compressor, air-cooled condenser, evaporator, and safety controls. An instruction manual is also provided.

Uploaded by

Virender Rana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

KCRAC-104

WINDOW AIR CONDITIONING TEST RIG

DESCRIPTION :

The Window Air Conditioning Test Rig unit is required to conduct experiments and demonstrate the
process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that
temperature, pressure etc. may be measured at different points in the air conditioning system.

EXPERIMENTATION:
To study the Vapour Compression air conditioning cycle.
To Calculate Co-efficient of performance- (COP) by the use of P-H diagram.

UTILITIES REQUIRED :

Electric supply Single Phase, 220 V AC, 50 Hz., 10 Amp.


Floor area : 2 m x 1m

TECHNICAL DETAILS :
Compressor :
Hermitically sealed compressor.
Capacity 1 Ton, Kirloskar make.
Condenser : Air cooled compatible to compressor
Condenser Cooling fan : Compatible capacity with permanent lubricated motor.
Pressure Gauges : 2 Nos.
Evaporator : Made of copper tube and aluminum
fins fitted with compatible capacity fan.
Safety Control : over load and over current protection for Compressor with
Time delay circuit.
Expansion Device : Capillary Tube compatible capacity.
Temperature Sensor : RTD PT-100 Type.
Temperature Measurement : Digital Temperature Indicator with multi-channel switch.
All Other accessories like Hand shut off valves, filter drier and Thermostat, Pressure gauges will
be provided.
An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be
provided along with the Apparatus
The whole set-up is well designed and arranged on a rigid structure painted with industrial PU
Paint.

REFRIGERATION & AIR CONDITIONING LABORATORY K.C. ENGINEERS PVT. LTD., Ambala Cantt, Haryana (INDIA).
PS KCRAC-104 : 03 : 0115 e-mails : [email protected]; [email protected]
Specification subject to change without notice website : www.kcengineers.com; www.kcengineers.tradeindia.com
Photograph is only for reference, final product may vary from it. AN ISO 9001 : 2008 CERTIFIED COMPANY

You might also like