Scribd
Upload
178 views2 pages

Basaltesentidoiov1 1help

This document describes a macro called "Basalte Sentido IO v1.1" that controls communication between Basalte keypads and a Crestron processor via RS485. The macro establishes serial communication between the keypads and Crestron device for sending and receiving data. It requires a Crestron serial communication hardware interface and setup of the serial connection via RS485 between the Crestron device and a Basalte serial hub.

Uploaded by

Vishal Suryawani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
178 views2 pages

Basaltesentidoiov1 1help

This document describes a macro called "Basalte Sentido IO v1.1" that controls communication between Basalte keypads and a Crestron processor via RS485. The macro establishes serial communication between the keypads and Crestron device for sending and receiving data. It requires a Crestron serial communication hardware interface and setup of the serial connection via RS485 between the Crestron device and a Basalte serial hub.

Uploaded by

Vishal Suryawani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Partner: Basalte

Model: Sentido
Device Type: Device Interface

GENERAL INFORMATION:
SIMPLWINDOWS NAME: Basalte Sentido IO v1.1

CATEGORY: Device interface

VERSION: v1.1

The Basalte Sentido IO.umc macro controls communication between the Basalte Keypads
SUMMARY:
and the Crestron processor via RS485

The Basalte Sentido IO.umc macro controls communication between the Basalte Keypads
and the Crestron processor via RS485. The Basalte Sentido IO.umc macro has to be used
GENERAL NOTES:
in combination with the Basalte Sentiodo.umc macro. The macro creates a better
organization of the communication between all the keypads and Crestron.

CRESTRON HARDWARE
C2I-COM, ST-COM, C2-COM-* or CNX-COM2
REQUIRED:

RS485
Baud:38400
SETUP OF CRESTRON
Parity: None
HARDWARE:
Data Bits: 8
Stop Bits: 1

VENDOR FIRMWARE: Unknown

Connect the Serial Com Port of the Crestron Processor with the RS485 Interface of the
VENDOR SETUP:
Basalte Serial hub.

CABLE DIAGRAM:
Partner: Basalte
Model: Sentido
Device Type: Device Interface
CONTROL:
Sentido_To_Keypads S Serial String Data sent to device on its RS485 Connection.

Serial signal that has to be connected with the "From_device" serial ouput of
sentido_XX_From_Keypad S
'Basalte Sendito v1.0 macro' xx. XX is the address of the keypad.

FEEDBACK:
Sentido_From_Keypads S Serial String Data sent from device on its RS485 Connection.

Serial signal that has to be connected with the "To_device" serial input of 'Basalte
Sentido_XX_To_Keypad S
Sendito v1.0 macro' xx. XX is the address of the keypad.

TESTING:
OPS USED FOR TESTING: V5.000.023

SIMPL WINDOWS USED FOR TESTING: 3.11.06

DEVICE DB USED FOR TESTING: 40.00.006.00

CRESTRON DB USED FOR TESTING: 30.00.001.00

SYMBOL LIBRARY USED FOR TESTING: 787

SAMPLE PROGRAM: Basalte Sentido v1.1 Pro2 Demo

REVISION HISTORY: v1.1

You might also like