Contents AP Racing 1

CONTENTS PAGE CONTENTS PAGE

- INTRODUCTION 2. - CLUTCH RELEASE

BEARINGS 93.
- MEET THE TEAM 3.
- CARBON/CARBON
- BRAKE CALIPERS 4 to 44. CLUTCHES 94 to 108.
- GENERAL INFORMATION. 4. - GENERAL INFORMATION. 94.
- STANDARD 13 TO 31. - Ø140MM CLUTCHES. 100.
- 2 PISTON . 13. - Ø184MM CLUTCHES. 105.
- GENERAL USE. 16. - Ø200MM CLUTCHES. 108.
- GT. 17.
- RALLY. 22. - RACE CLUTCHES 109 to 138.
- SINGLE SEATER. 28. - GENERAL INFORMATION. 109.
- TOURING CAR. 30 - Ø115MM CLUTCHES. 114.
- HISTORIC. 37. - Ø140MM CLUTCHES. 117.
- STOCK CAR. 38. - Ø184MM CLUTCHES. 123.
- PRO 5000+ RANGE. 32. - Ø200MM CLUTCHES 134.
- ROAD CAR. 40. - Ø215MM CLUTCHES 137.

- FORMULA BRAKE KITS 45 to 48. - FORMULA CLUTCH KITS 139.

- COMPETITION. 45.
- ROAD. 46. - HIGH PERFORMANCE
CLUTCHES 140 to 160.
- BRAKE DISCS 49 to 57. - GENERAL INFORMATION. 140.
- GENERAL INFORMATION. 49. - COVER ASSEMBLIES. 141.
- VENTILATED. 55. - DRIVEN PLATES. 143.
- SOLID. 57. - APPLICATION LISTING. 146.
- INTEGRAL. 57.
- MOTORCYCLE 161 to 175.
- INTRODUCTION. 161.
- BRAKE PADS 58 to 65. - GENERAL BRAKE
- GENERAL INFORMATION. 58. INFORMATION. 162.
- BRAKE PAD PROFILES. 62. - BRAKE CALIPERS 162.
- SUPERMOTO RANGE. 165.
- ACTUATION 66 to 85. - BRAKE KITS. 166.
- MASTER CYLINDERS. 66. - BRAKE DISCS 167.
- RESERVOIRS. 73. - BRAKE PADS 168.
- HYDRAULIC FITTINGS. 74. - MASTER CYLINDERS. 169.
- BRAKE FLUID. 75. - CARBON/CARBON
- PROPORTIONING VALVES. 76. CLUTCHES. 173.
- PEDAL BOXES. 77. - SIDECAR EQUIPMENT. 174.
- BALANCE BARS. 83. - CLASSIC RACING SPARES. 175.
- BALANCE BAR
ACCESSORIES. 85.
All information contained is intended as a guide
only, the responsibility rests with the reader to
- AIR JACKS 86 to 89. ascertain its accuracy.
- GENERAL INFORMATION. 86. All images are for illustration purposes only.
- AIR JACKS. 86. All images and information are the copyright of
- AIR JACK ACCESSORIES. 89. AP Racing and may not be reproduced in any way
without our prior written consent.
- CLUTCH
SLAVE CYLINDERS 90. Note:
The 2007 Product Catalogue on CD-Rom will
include all installation drawings for the products
- CLUTCH MOUNTING listed in this publication where possible.
STUDS 92.

www.apracing.com +44 (0)24 7663 9595

2 AP Racing Introduction
WELCOME TO AP RACING’S 2007 THE SCIENCE OF
PRODUCT CATALOGUE FRICTION.
Transferring 1000 bhp
This catalogue has been designed to provide the user from power unit to road
from whatever level of motorsport, OE / High performance or reducing speed by
and motorcycle industry with a complete guide to the 150 m.p.h. or more in
most popular AP Racing products. seconds - these are
However not all products are listed so if your requirements never simple matters. At the pinnacle of motor sports,
differ from those in the catalogue please contact us for numerous other factors dictate the most specialised
more help. requirements for ultimate success. Exploiting the unique
A version of this catalogue is also available on CD-ROM properties of modern materials and adapting scientific
advance to manufacturing method. AP Racing is constantly
probing the boundaries of technology.
POWER & PERFORMANCE
The ability to convert
maximum power into TESTING TO THE LIMIT
optimum performance At our Coventry head-quarters
has made AP Racing we apply rigorous production
synonymous with paramaters and scrupulous quality
technology and control systems, but what really
performance for road as matters is how our products per-
well as on the race track. form when pushed to the absolute
AP Racing components limits. All the graphs, charts, digital
deliver performance which displays and analytical results in
translates power into the world count for nothing if a
results. That is why AP Racing has achieved more sport- component fails to last the distance.
ing success than any other manufacturer of brake and We have highly sophisticated
clutch systems. research and development, design
and testing facilities to make sure
this does not happen, you can
A POWERFUL PEDIGREE depend on AP Racing when the
Experience breeds excellence.
lights change.
For more than half a century, AP
Racing has been a world leader in
the manufacture of competition,
high performance and motorcycle
components.
It is no coincidence that every
Formula One championship since
1967 has been won using our PRODUCTIVE
equipment. PARTNERSHIPS
In every branch of motorsport, Working with the best is the
from WRC, Nascar to GT and only way to produce the best.
Moto GP motorcycles in more than Over the years, AP Racing
100 countries around the world, has built close working
you’ll find AP Racing behind and relationships with leading
on the winning teams. motor manufacturers and with the most successful racing,
rally and motorcycle teams. As much as anything, it is
LOOKING TO THE FUTURE through partnerships with the sport’s leading practitioners
Staying in front can be every bit as demanding as taking that we can devise individual specifications to satisfy the
the lead. At AP Racing, yesterday’s demands of the most exacting motoring environments.
knowledge, know-how and
experience provide the platform for HELP IS ON HAND.
today’s development. AP Racing engineers are on
Building on success, AP Racing is hand at most major motor sport
constantly exploring new systems, events to offer practical help and
techniques and technical advice to customers of
materials in a today and tomorrow.
continuous At our head office we have a
quest for further dedicated team of engineers and customer service officers,
improvement. ready to respond toany enquiry.
They are supported by expert development and production
staff with access to our test and research facilities.

www.apracing.com +44 (0)24 7663 9595

 Introduction AP Racing 3

MEET THE TEAM

TOMORROW’S TECHNOLOGY ON THE AP Racing have a dedicated Technical and Sales team
ROAD for both its Race and Road areas, here is a chance to
Competition is the best of test-beds, put some faces to the conversations you will have.
and AP Racing’s years of experience
in motor sport also bring benefits RACE SALES
for the latest high performance
Norman Heather
road cars. The emphasis may be Barker
Sean
Walsh
Fisher
Bob
Witcomb
Sales & Senior
different, qualified by the everyday Marketing
Sales
Customer
Customer
Manager Service
demands of modern road condi- Director
024 7688
Service
024 7688
024 7688 024 7688
tions, but the essential requirements 3310
3324
3327
3321

remain the same. With a dedicated

Road Car team of engineers and Andy
Phillips
Matthew
Faulkner
Alan
Carson
Mark
Goldswain
designers AP Racing helps to bring Customer Customer Customer Customer
Service Service Service Service
extraordinary capability to extraor- 024 7688 024 7688 024 7688 024 7688
dinary cars like, Aston Martin, 3322 3323 2710 2701

Bugatti, Caterham, Ford, HSV,

Koenigsegg, Lotus, Noble, Morgan, Seat and TVR to RACE ENGINEERS
name a few, and with our Formula Big Brake and Bill
Ian
Nash
Raymond
Bailey Steve
Condon
Formula Clutch Conversions AP Racing bring the Technical
Automotive Motorcycle Bryan
Technical Technical Formula
ultimate performance and offer a racey looking upgrade Sales
Sales Sales One
Executive
to the man in the street. Manager Manager 024 7688
024 7688
024 7688 024 7688 3317
3316
3311 3313

THE COMPLETE COMPETITIVE RANGE. Kevin

Peter Steve Steve
Collen O’Connell Hood
The 2007 product catalogue offers an unequalled selection McDonnell Formula Touring USA
Rally
of brake and clutch systems and accessories. They form 024 7688
Kits Car Stock Car
024 7688 024 7688 001 704
an integrated range 3315 3318 3302 892 3490
of thousands of
individual Nic Peter
Simon
Ellis
Joe
Bennett
Harris
components and Olson
GT /
Technical Marketing
GT Support &
products carefully 024 7688 WTCC
& Website Publications
3314 024 7688
developed and 3305
024 7688
3319
024 7688
3348
selected for every
motorsport, ORIGINAL EQUIPMENT (ROAD CAR)
motorcycle and high
performance road
application.
With a worldwide
network of specialist
Richard Joyce Tom Ferenc Matthew Dodd Alan Stacey Jill Higham
distributors, modern Technical Sales Sales Engineer Project Manager Customer Customer
Manager 024 7688 2719 024 7688 3339 Service Service
Internet communi- 024 7688 3312 024 7688 3325 024 7688 2725
cation facilities and
express delivery GENERAL INFORMATION
services, AP Rac- - QUALITY
ing ensures that the
AP Racing quality systems
widest selection of
are accredited to BS EN
high performance
ISO9001:2000 and we operate a
products is
continuous improvement policy.
available, wherever
you are. E-mail Addresses:
CONTACT DETAILS General:
N.B Whilst this catalogue provides comprehensive Address: [email protected]
AP Racing, Wheler Road, Technical:
details of AP Racing products our website (www.
Coventry, CV3 4LB, UK Race:
apracing.com) offers the most up to date information
[email protected]
on the changes that may occur during 2007.
Telephone: Road:
Note: +44 (0)24 7663 9595 [email protected]
All information contained is intended as a guide only, the responsibility rests with the
Facsimile: Motorcycle:
reader to ascertain its accuracy. All images are for illustration purposes only.
Sales: [email protected]
All images and information are the copyright of AP Racing and may not be reproduced
in any way without our prior written consent +44 (0)24 7663 9559 Hours of Business:
Acknowledgements for use of images:
Roadcar: Monday to Thursday
+44 (0)24 7688 3390 8.00am to 5.30pm
Website: Friday
www.apracing.com 8.00am to 5.00pm

www.apracing.com +44 (0)24 7663 9595

4 Brake Calipers General & Technical Information

BRAKE CALIPER TEMPERATURES

AP Racing recommend the following information on caliper
temperatures as advice only. Seal life is governed by time at
temperature, but providing a regular re-seal is carried out the
following can be used as guide. Caliper temperatures measured
on the back of the cover half. (Adjacent logo).

- Calipers that Regular run up to 200°C re-seal every other

event.
- Calipers that run Intermittently from 200°C to 220°C and in
excess re- seal as soon as possible.
- Avoid soak temperature where possible, (i.e in the garage,
foot on brake pedal) where calipers can exceed 240°C.

INTRODUCTION SERVICING AND RECONDITIONING

For over 50 years AP Racing has been a world leader in the - Regular examination and maintenance of brake calipers is
technology and manufacture of competition and performance essential to maintain safety and efficiency of operation.
brake calipers. During this period many of the world’s premier AP Racing recommend that brake calipers should be cleaned
race and championships have been won using AP Racing with soapy water only, as this will not damage any of the seals.
braking systems. With one of the most comprehensive ranges - A complete reconditioning service is available.
available, AP Racing can offer a brake caliper suitable for every - Seal repair kits can be identified by referring to the individual
category of motorsport supplemented with a wide range of caliper information or the table on page 6.
brake calipers to suit performance road car applications for both - Other spare parts e.g. pistons, bleed screws, pad retainers
OE and ‘bolt-on’ brake conversion kits. The AP Racing caliper are also available by referring to individual caliper details
range has been separated into the following caliper groups to - Replacement seals should be soaked in brake fluid for 30
aid selection, they are: The Standard range which consists, 2 minutes prior to fitment.
Piston, General Use, GT, Rally, Single Seater, Touring Cars, PRO - For more information please contact AP Racing.
5000+ range, Historic, US Stock Car and the Road Car range.
The calipers shown from pages 13 to 44 are the most popular
calipers selected from the extensive AP Racing range and will
CALIPER HANDING
- Calipers are available to suit installation in front or behind the
provide the solution to most if not all applications. The standard
axle.
calipers benefit from a more competitive price structure coupled
The following abbreviations are used in this publication:-
with preferential delivery times. Specialist caliper ranges such
- RHT = Right Hand Trailing.
as those used in Formula One are not shown in this catalogue.
- LHT = Left Hand Trailing.
The complete range includes many other options, so if you
- RHL = Right Hand Leading.
require a caliper not illustrated please contact AP Racing for
- LHL = Left Hand Leading.
information on availability, price and delivery.
- Bleed screws should always be positioned at the top.
- Discs should always pass the small piston first on
ROAD OR RACE ? differential bore calipers.
It is important to choose the correct type of brake caliper for the
- Cross over pipes should always be positioned at the bottom.
intended application. The design requirements for a brake caliper
to be used on the public highway (Road) and for competition use TRAILING Bleed Screws at Top LEADING
are significantly different. A road caliper often has to go for long (Behind Axle) (In Front of Axle)
periods without servicing or maintenance therefore corrosion
protection and durability are primary considerations. A brake Disc & Car Direction
caliper designed for competition use must be lightweight yet Disc Passes
capable of operating reliably at high temperatures, however it Small Bores
is normally cleaned and serviced very frequently. AP Racing First.
produce brake calipers optimised for these two very different
Pipes at Bottom
applications. Although generally derived from our racing calipers
all AP Racing road calipers have a protective paint finish, wiper
(dirt) seals or boots to prevent dirt ingress and are of a heavier .
construction than calipers intended solely for competition use. DISC PATHWAY CLEARANCE
We strongly recommend that only purpose designed ‘Road’ Disc diameter clearance should be 2.5mm nominal from disc
calipers are used on vehicles intended for regular use on the outside diameter to caliper pathway.
public highways The clearance can be reduced to 1.8mm minimum for smaller
diameter discs (Ø280mm and lower).
It is recommended that the tighter clearance is only used with
DESIGN & DEVELOPMENT radial mounted
The whole process of design and
calipers where
development is carried out at our
some degree of
headquarters in Coventry. With our new
adjustment by
brake dynomometer we are able to
using shims can
reproduce the most demanding test
be achieved if
environments. AP Racing designers use
the latest computer technology to produce required.
A
DISC DI IU
S
some of the most aesthetic and effective ROTATION I DE RAD DISC
S
brake calipers at the affordable prices the UT AY
O HW
markets request. S C AT
DI C P
S
DI

www.apracing.com +44 (0)24 7663 9595

 General & Technical Information Brake Calipers 5

‘O’ RING (SEALED) BLEED ANTI-KNOCKBACK SPRINGS

A range of anti-knockback springs are available
SCREWS for use with AP Racing calipers. The spring is
‘O’ Ring bleed screws are designed to
located behind the piston in the caliper bore and is
prevent fluid leakage during bleeding in
designed to counteract pad knock off. The springs
conjunction with a specially designed
are available in three strengths indicated in lbs/f
bleed screw port. Now standard fitment on
(force) with 2 sizes dependant upon piston diameter.
all recent AP Racing caliper designs.
AP Racing offer two bleed screws and two Spring Strength. Piston ØH. Up to 34mm. Piston ØG. 34mm & above.
o-rings in a kit under the part numbers from the table below. 4lbs CP2632-113 CP2667-105
7lbs CP4100-121 CP2667-113
Thread Kit ‘Bleed Screw ‘O’ Ring 9lbs CP3432-134 CP2667-125

Size. Part No. Part No. Part No. Anti-Knockback Spring Kits
M10x1.0 CP3880-1 CP4970-125 CP4970-124 Part Number Contents Part Number Contents
4 x CP4100-121 &
CP6518-4LBSS 4 x CP2632-113 CP6518-7LBSSL
3/8”x24UNF CP3880-2 CP5820-115 CP6297-111 2 x CP2667-113
CP6518-4LBLL 4 x CP2667-105 CP6518-7LBSSSS 8 x CP4100-121
4 x CP2632-113 &
CP6518-4LBSSL CP6518-9LBLL 4 x CP2667-125
2 x CP2667-105
DRY BREAKS CP6518-4LBSSSS 8 x CP2667-105 CP6518-9LBSSL
4 x CP3432-134 &
Dry-Break fittings have been 2 x CP2667-125
CP6518-7LBLL 4 x CP2667-113
designed for use with any
caliper suitable for ‘O’ Ring
sealed bleed screws as BASIC DIMENSIONS
described above. The male The drawing below offers a brief explanation of basic AP Racing
dry-break coupling is fitted in Drawing dimensions.
place of the bleed screw and 12.20
26.10 (1.28”) Dimension Descriptions
once fitted there should be (0.48”)

no need to loosen or remove Top of the pad material to mounting hole boss face,
PL
(hole centre-line on lug type calipers).
the coupling unless it is being
3/8” x 24UNF - 3A

Offset - disc centre line to centre of mounting hole

Ø17.15 MAX

replaced. The male coupling C

(mounting face on lug type calipers)
(0.675”)

is basically a valve that is

(0.433”)
Ø11.00

D Mounting hole centres.

opened when the female H Mounting hole diameters.
coupling is connected to it, 19.70 (0.752”) E Disc width.
the female coupling would be Wheel centre to caliper mounting hole boss. (disc
U
connected to a bleed pipe and container allowing brake fluid to diameter / 2 - ‘Pl’ dimension).
be pushed through the system to bleed it. Another advantage
Dim’n ‘C’
of the dry-break system is that it removes the possibility of
Dim’n ‘PL’

introducing air into the hydraulic system via bleed screws when
vacuum bleeding.
Fitting Thread Size Part No.
Dim’n ‘D’
Dim’n ‘U’

Male M10x1.0 CP6300-6

Male 3/8”UNF CP6300-5
Female -3 Aero-quip CP6300-7
Wheel & Disc C

LIQUID-COOLED CALIPERS
CP4910 & CP5148
Included in the AP Racing caliper range are two Liquid-Cooled
Calipers. Although a total loss system can be used, AP Racing
strongly recommend the use of a re-circulating system, such Dim’n ‘E’
as that shown in the Dim’n ‘H’
diagram on the right,
which is both lighter PART NUMBERING SYSTEM
and more efficient. An explanation of a Brake Caliper part number;
Liquid (Usually water)
1. 3. 5.
is circulated through
galleries in the caliper
by means of a small CP6070-2S7MP
electric pump and a 2. 4. 6.
suitably positioned
radiator. A small No. Explanation Description
header tank (fitted 1. Caliper Family No. Base caliper No.
with a pressure cap) Even No. = Right hand caliper.
2. Stroke No.
will also be required. Odd No. = Left hand caliper.
The pump supplied by AP Racing (CP4096-163) is fitted with Position of inlet S = Sidefeed. / E = Endfeed. /
3.
Adaptor. R = Recirculating.
0.347” x 20UNF connectors to suit -4 aeroquip hose. The ideal
0 = No spring. / 4 = 4lbs. / 7 = 7lbs.
pump location is on the cool side of the calipers in order to 4. Anti-knockback Spring.
& 9 = 9lbs.
avoid excessive temperatures. A corrosion inhibitor should be No character = Aluminium Alloy.
used to prevent corrosion. 5. Piston Material.
L = Stainless Steel. & M = Titanium.
C = Pistons fitted with caps.
6. Options.
P = Pistons can accept caps.

www.apracing.com +44 (0)24 7663 9595

6 Brake Calipers Brake Caliper Seals
REPLACEMENT ILLUSTRATIONS - DRAWINGS ARE A GUIDE ONLY.
CALIPER SEALS CP4518 - Seal in Bore. CP4519 - Seal in Bore CP4509 - Seal on Piston
Brake calipers are a with Dirt Seal.
Caliper
safety critical item and Caliper
Caliper Body
AP Racing recommend Body
Body
that calipers are

n
on
reconditioned and piston

s to
st

on

Pi
Pi

st
seals inspected regularly

Pi
to maintain optimum
performance. Where calipers have been
subjected to high temperatures or have
been used in adverse conditions such as
REPLACEMENT CALIPER SEAL TABLE
Caliper Bore identification Letters and Size Reference (mm)
Rallying, the calipers should be recondi- A B C D E F G H J K L M M
tioned and seals replaced more frequently 25.4 26.0 27.0 28.6 31.8 34.0 34.9 36.0 38.1 41.3 44.5 47.6 50.8
CP4518 - Seal in bore Replacement seals and kit part numbers
to ensure that safety and performance levels Caliper Bore in (mm) Individual Seal. Seal Kit Caliper
are maintained. Replacement seals 25.4 CP4900-172 CP4518-A
31.8 CP4900-168 CP4518-E
should be soaked in brake fluid for 30 36.0 CP4900-165 CP4518-H
2
minutes prior to fitment. When cleaning 38.1 CP4900-164 CP4518-J
Piston
41.3 CP4900-163 CP4518-K
calipers use warm soapy water or an 44.5 CP4900-162 CP4518-L
alcohol based cleaning fluid e.g. 50.8 CP4900-160 CP4518-N
25.4 CP4900-172 CP4518-AA
Methylated Spirits. DO NOT USE PETROL 25.4 & 28.6 CP4900-172 & -169 CP4518-AD
OR GASOLINE as this will damage the 25.4 &31.8 CP4900-172 & -168 CP4518-AE
27.0 & 28.6 CP4900-170 & -169 CP4518-CD
seals. Replacement seal kits are available 27.0 & 31.8 CP4900-170 & -168 CP4518-CE
for all AP Racing brake calipers. 27.0 & 34.0 CP4900-170 & -167 CP4518-CF
27.0 & 34.9 CP4900-170 & -166 CP4518-CG
Replacement seal kit details for all piston 28.6 CP4900-169 CP4518-DD
configurations used in AP Racing brake 28.6 & 31.8 CP4900-169 & -168 CP4518-DE
28.6 & 34.9 CP4900-169 & -166 CP4518-DG
calipers “seal in bore”, “seal on piston” 28.6 & 36.0 CP4900-169 & -165 CP4518-DH
and “seal in bore with dirt seals” are given 31.8 CP4900-168 CP4518-EE
4
31.8 & 34.9 CP4900-168 & -166 CP4518-EG
in the table opposite. 31.8 & 36.0 CP4900-168 & -165 CP4518-EH
Piston
34.9 CP4900-166 CP4518-GG
34.9 & 41.3 CP4900-166 & -163 CP4518-GK
ORDERING 36.0 & 44.5 CP4900-165 & -162 CP4518-HL
36.0 & 38.1 CP4900-165 & -164 CP4518-HJ
To determine the correct seal kit proceed 38.1 CP4900-164 CP4518-JJ
as follows:- 38.1 & 41.3 CP4900-164 & -163 CP4518-JK
38.1 & 44.5 CP4900-164 & -162 CP4518-JL
1) If you know the part number of your 41.3 CP4900-163 CP4518-KK
caliper then determine the correct part 41.3 & 44.5 CP4900-163 & -162 CP4518-KL
44.5 CP4900-162 CP4518-LL
number of the kit required by referring to 44.5 & 47.6 CP4900-162 & -161 CP4518-LM
the individual caliper pages from page 25.4 CP4900-172 CP4518-AAA
25.4 & 27.0 & 28.6 CP4900-172 & -170 & -169 CP4518-ACD
13 to 44. 25.4 & 27.0 & 31.8 CP4900-172 & -170 & -168 CP4518-ACE
2) If you do not know the part number of 25.4 & 28.6 CP4900-172 & -169 CP4518-ADD
26.0 & 27.0 & 31.8 CP4900-171 & -170 & -168 CP4518-BCE
your caliper then proceed as follows:- 26.0 & 28.6 & 36.0 CP4900-171 & -169 & -165 CP4518-BDH
a) measure the nominal piston diameters. 26.0 & 31.8 & 36.0 CP4900-171 & -168 & -165 CP4518-BEH 6
27.0 & 31.8 & 38.1 CP4900-170 & -168 & -164 CP4518-CEJ Piston
b) determine the type by comparison with 28.6 & 31.8 & 38.1 CP4900-169 & -168 & -164 CP4518-DEJ
the drawings at the bottom of the page. 28.6 & 31.8 & 41.3 CP4900-169 & -168 & -163 CP4518-DEK
31.8 CP4900-168 CP4518-EEE
c) Look at the column (caliper bore in 31.8 & 34.0 & 41.3 CP4900-168 & -167 & -163 CP4518-EFK
mm) identify your sizes. The relevant kit 31.8 & 34.9 & 44.5 CP4900-168 & -166 & -162 CP4518-EGL
34.0 & 38.1 & 44.5 CP4900-167 & -164 & -162 CP4518-FJL
number can be found on the right. 25.4 CP4900-172 & 168 CP4518-AEAE 8 Piston
d) When ordering please quote the seal CP4519 - Seal In Bore Replacement Seals and Dirt Seal Part Numbers.
kit part no. given on the right hand side 41.3 CP4900-163 (112854) & 113094 Retainer CP4508-K
44.5 CP4900-162 (119990) & 3662-298 Retainer CP4508-L
from the relevant table, then contact your 31.8 CP4949-110 (CP3477-105) CP4519-E
2
nearest AP Racing stockist for availability. 36.0 CP4949-113 (3853-742) CP4519-H
Piston
38.1 CP4949-114 (3865-742) CP4519-J
3) Each seal kit contains the following:- 41.3 CP4949-115 (112854) CP4519-K
a) One letter after Kit Nos = 2 seals, 44.5 CP4949-116 (119990) CP4519-L
27.0 CP2632-125 (CP4098-106) CP4519-CC
e.g. -J 27.0 & 31.8 CP2632-125 (CP4098-106) & CP4949-110 (CP3477-105) CP4519-CE
b) Two letters after Kit Nos= 4 seals, 28.6 & 36.0 CP2414-118 (4477-108) & CP4949-113 (CP4477-108) CP4519-DH
31.8 CP4949-110 (CP3477-105) CP4519-EE 4
e.g. -JJ 36.0 & 38.1 CP4949-113 (3853-742) & CP4949-114 (3865-742) CP4519-HJ Piston
c) Three letters after Kit Nos = 6 seals, 38.1 CP4949-114 (3865-742) CP4519-JJ
38.1 & 41.3 CP4949-114 (3865-742) & CP4949-115 (112854) CP4519-JK
e.g. -CEJ 41.3 & 44.5 CP4949-115 (112854) & CP4949-116 (119990) CP4519-KL
d) Four letters after kit Nos = 8 seals, 25.4 & 28.6 CP4900-172 (CP4477-109) & CP4900-169 (CP4477-108) CP4519-ADD
CP2623-125 (CP4098-106) & CP4949-110 (CP3477-105)
e.g. -AEAE 27.0 & 31.8 & 38.1 CP4519-CEJ 6
& CP4949-114 (3865-742)
Piston
CP4949-110 (CP3477-105) & CP4949-114 (3865-742)
31.8 & 38.1 & 44.5 CP4519-EJL
& CP4949-116 (119990)
NB. Kits are priced more competitively CP4509 - Seal on Piston Replacement Seals and Seal Kit part Numbers.
compared to purchasing individual seals. 36.0 CP3724-134 CP4509-H 2 Piston
28.6 & 27.0 CP3724-138 & -139 CP4509-DC
NB. With CP4519 seal kits, the appropriate 28.6 & 34.9 CP3724-138 & -135 CP4509-DG
number of dirt seals are also included. 31.8 CP3724-137 CP4509-EE
31.8 & 36.0 CP3724-137 & -134 CP4509-EH
NB. Kits contain one caliper set of seals 31.8 & 38.1 CP3724-137 & -133 CP4509-EJ 4
e.g. 2, 4, 6, or 8. 34.9 & 41.3 CP3724-135 & -132 CP4509-GK Piston
38.1 CP3724-133 CP4509-JJ
38.1 & 41.3 CP3724-133 & -132 CP4509-JK
38.1 & 44.5 CP3724-133 & -131 CP4509-JL
41.3 & 44.5 CP3724-132 -131 CP4509-KL
27.0 & 31.8 & 38.1 CP3724-139 & -137 & -133 CP4509-CEJ 6
28.6 & 31.8 & 41.3 CP3724-138 & -137 & -132 CP4509-DEK Piston

www.apracing.com +44 (0)24 7663 9595

 Caliper Spare Parts Brake Calipers 7

REPLACEMENT PARTS
Replacement parts listing on pages 7 to 12 are for all brake caliper manufactured by AP Racing with the following exceptions. F1
and Customer specific. These parts are available for sale individually, however some may be obsolete and are listed as a guide only.
Please contact AP Racing for further information.
Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP2195-1002/1003E0 CP3720-182 CP2195-9 CP2055
CP2270-144/145S4QR CP3720-182 CP2270-92
CP2271-182/183S4QR CP3720-182 CP2260-66
CP2279-400S4BP CP3720-182 CP2279-6
CP2361-96/97S4QR CP3720-182 CP2260-66
CP2382-12/13E4 CP3720-182 CP2383-52
CP2383-12E0 CP3720-182 CP2383-52
CP2383-12/13E4 CP3720-182 CP2383-52
CP2485-2/3S0L CP3720-182 CP2195-157 3662-290
CP2485-8/9S0L CP3720-182 CP2195-157 3662-290
CP2505-34/35S0L CP3720-182 CP2195-14 113094
CP2505-3S0L CP3720-182 CP2195-14 113094
CP2561-3S4 3486-229 CP2260-66
CP2576-12E0 CP3720-182 CP2576-105
CP2576-3E0 CP3720-182 CP2576-105
CP2577-12E0 CP3720-182 CP2577-102
CP2577-14E0 CP3720-182 CP2577-102
CP2577-15E0 CP3720-182 CP2577-102
CP2577-3E0 CP3720-182 CP2577-102
CP2696-38E0 CP3720-182 CP2195-9 CP2055
CP3176-2/3E0 CP3720-182 CP3176-102
CP3177-2E0 CP3720-182 CP3177-102
CP3177-4E0 CP3720-182 CP3177-102
CP3178-2E0 CP3720-182 CP3178-102
CP3228-10/11S4 CP3720-182 CP3228-103 CP3228-4
CP3228-26/27S4 CP3720-182 CP3228-103 CP3228-4
CP3228-28/29S4 CP3720-182 CP2361-4 CP3228-4
CP3228-38/39S4 CP3720-182 CP3228-103 CP3228-4
CP3228-44/45S4 CP3720-182 CP3228-103 CP3228-4
CP3228-6/7S4 CP3720-182 CP2361-4 CP3228-4
CP3307-1004/1005S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1016/1017S0 CP3720-182 CP2260-66 CP2270-92 CP3307-248 CP3307-264 CP3307-222 4
CP3307-1028/29S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1034/1035S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1038/1039S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1046/47/48/49S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1052/53/54/55S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1058/1059S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-1064/65/66/67S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-14/15S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-262/263S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-58/59/60/61S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-64/65S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-68/69S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-72/73/74/75S0 CP3720-182 CP2260-66 CP2270-92 CP3307-248 CP3216-29 CP3307-222 4
CP3307-76/77/78/79S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-84/85S0 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-92/93S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3307-9697S4 CP3720-182 CP2260-66 CP2270-92 CP3307-246 CP3216-29 CP3307-222 4
CP3344-1000/1/2/3S4 CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 4
CP3344-12/13S4 CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 4
CP3344-36/37S4 CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 4
CP3344-48/49/50/51S4 CP3720-182 CP3228-103 CP3344-109 CP3344-127 CP3344-140 CP3567-109 4
CP3344-60/61S4 CP3720-182 CP3228-103 CP3344-109 CP3344-161 CP3344-164 CP3567-109 4
CP3345-10/11/12/13S4 CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 4
CP3345-14/15/16/17S4 CP3720-182 CP3228-103 CP3344-109 CP3345-117 CP3345-116 CP3567-109 4
CP3345-2/3S4 CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 4
CP3345-40/41S4 CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 4
CP3345-4/5/6/7S4 CP3720-182 CP3228-103 CP3344-109 CP3344-108 CP3344-110 CP3567-109 4
CP3345-88/89/90/91S4 CP3720-182 CP3228-103 CP3344-109 CP3344-122 CP3344-113 CP3567-109 4
CP3345-94/95S4 CP3720-182 CP3228-103 CP3344-109 CP3345-162 CP3345-96 CP3567-109 4
CP3369-2/3E0 3486-229 CP3086-115 CP3369-114
CP3395-1050/51/52/53S7 CP3636-107 CP3394-109 CP3788-112 CP3395-1054 CP3846-101 4
CP3395-2/3/4/5S4 CP3720-182 CP3394-109 CP3394-110 CP3394-113 CP3394-111 CP3394-140 4
CP3395-2/3/4/5S4M CP3720-182 CP3395-110 CP3395-109 CP3394-113 CP3394-111 CP3394-140 4
CP3395-82/83U9L CP4100-113 CP2667-153 CP3395-149 CP3395-145 CP3395-135 CP3394-118 2 CP3394-140 2
CP3434-1000/1/2/3S4 CP3720-182 CP3434-116 CP3434-117 CP4890-101 CP3434-15
CP3470-38/39S7 CP3720-182 CP3257-108 CP3257-109 CP4890-101 CP3434-14
CP3470-42/43S7 CP3720-182 CP3257-108 CP3257-109 CP4890-101 CP3434-14
CP3552-14S0 3486-268 CP3552-132 3662-345
CP3552-18/19S0 3486-268 3278-203 3662-345
CP3552-8/9S0 3486-268 3278-203 3662-345
CP3556-2/3S4 CP3720-182 CP3577-103 CP3344-122 CP3344-113 CP3567-109 4
CP3567-16/17/18/19S4 CP3720-182 CP3567-108 CP3344-109 CP3344-161 CP3344-164 CP3567-109 4
CP3567-8/9S7 CP3720-182 CP3567-108 CP3344-109 CP3345-117 CP3345-116 CP3567-109 4
CP3577-6/7S4 CP3720-182 CP3577-103 CP4069-108 CP3344-113 CP3567-109 4
CP3620-12/13S4M CP3720-173 CP4910-115 CP4890-101 CP3620-8 CP3720-106 4
CP3620-2/3S0M CP3720-173 CP3620-103 CP4890-101 CP3620-8 CP3720-106 4
CP3620-2/3S4 CP3720-173 CP3760-110 CP4890-101 CP3620-8 CP3720-106 4
CP3620-2/3S7M CP3720-173 CP3620-103 CP3434-118 CP3620-8 CP3720-106 4
CP3676-3/4E0 CP3720-182 CP2576-105
CP3677-4E0 CP3720-182 CP2577-102
CP3696-6E0 CP3720-182 CP3696-105
CP3697-2E0 3486-229 CP3697-104
CP3720-10/11S4 CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-35 CP3720-106 4
CP3720-12/13/14/15S4 CP3720-173 CP3720-126 CP3720-125 CP3440-118 CP3720-36 CP3720-106 4
CP3720-16/17S0M CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 4
CP3720-16/17S4 CP3720-173 CP3720-126 CP3720-125 CP3434-118 CP3720-34 CP3720-106 4
CP3720-16/17S4M CP3720-173 CP3720-115 CP3720-114 CP3434-118 CP3720-34 CP3720-106 4
CP3720-18/19S4M CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 4
CP3720-30/31/32/33S4 CP3720-173 CP3720-126 CP3720-125 CP3679-117 CP3720-38 CP3720-106 4
CP3720-30/31S4M CP3720-107 CP3720-115 CP3720-114 CP3679-117 CP3720-38 CP3720-106 4
CP3720-42/43/44/45S4 CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-34 CP3720-106 4
CP3720-42/43/44/45S4M CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34 CP3720-106 4
CP3720-76/77/78/79S4M CP3720-173 CP4910-114 CP3720-177 CP4890-101 CP3720-34 CP3720-106 4
CP3720-78/79S4 CP3720-173 CP3344-192 CP5000-209 CP4890-101 CP3720-34 CP3720-106 4
CP3720-84/85S4M CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-34
CP3720-88/89S4M CP3720-173 CP3720-115 CP3720-114 CP4890-101 CP3720-106 4
CP3720-8/9S4 CP3720-173 CP3720-126 CP3720-125 CP4890-101 CP3720-35 CP3720-106 4
CP3735-2/3S4 CP3720-182 CP3577-103 CP3735-107 CP3344-122 CP3344-113
CP3735-6/7S4 CP3720-182 CP3577-103 CP3735-107 CP3344-122 CP3344-113
CP3788-16/17/18/19S7 CP3720-173 CP3636-107 CP3394-110 CP3795-101 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3788-2/3/4/5S7 CP3720-173 CP3636-107 CP3394-110 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3788-6/7/8/9S4 CP3720-173 CP3636-107 CP3394-110 CP3788-112 CP3788-10 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3789-2/3/4/5S7 CP3720-173 CP3789-106 CP3394-109 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3789-6/7/8/9S4 CP3720-173 CP3789-106 CP3394-109 CP3788-112 CP3788-10 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3790-2/3/4/5S7 CP3720-173 CP3394-110 CP3483-101 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1

www.apracing.com +44 (0)24 7663 9595

8 Brake Calipers Caliper Spare Parts
Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP3790-6/7/8/9S4 CP3720-173 CP3394-110 CP3483-101 CP3788-112 CP3788-10 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3796-20/21/22/23S4 CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-134 CP3796-136 CP3596-108 4
CP3796-24/25/26/27S4 CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-134 CP3796-138 CP3596-159 4
CP3796-24/25/26/27S4M CP3720-182 CP3596-130 CP3620-103 CP3720-115 CP3796-134 CP3796-138 CP3596-159 4
CP3796-30/31/32/33S4 CP3720-182 CP3760-111 CP3760-110 CP3720-126 CP3796-135 CP3796-137 CP3596-159 4
CP3798-2/3/4/5S0M CP3720-173 CP3798-107 CP4296-113 CP3798-106 CP3798-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3799-2/3/4/5S0 CP3720-173 CP3799-112 CP3789-106 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3799-2/3/4/5S0M CP3720-173 CP3799-107 CP3799-106 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3801-2/3/4/5S7 CP3720-173 CP3789-106 CP3394-109 CP3795-101 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3801-4/5S4 CP3720-173 CP3789-106 CP3394-109 CP3795-101 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3808-4/5S4M CP4970-125 CP3808-108 CP3808-107 CP3808-7 CP3808-109 4
CP3809-2/3/4/5S0 CP3720-173 CP3846-109 CP3846-108 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3809-2/3/4/5S0M CP3720-173 CP3809-106 CP3809-107 CP3799-109 CP3799-6 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP3894-12/13/14/15S4 CP3720-173 CP3894-120 CP3894-121 CP3894-122 CP3895-109 CP3894-17 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP3894-14/15S4M CP3720-173 CP3894-108 CP3894-109 CP3894-110 CP3895-109 CP3894-17 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP3894-2/4S4 CP3720-182 CP3894-120 CP3894-121 CP3894-122 CP3895-109 CP3895-8 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP3894-2/4S4M CP3720-182 CP3894-108 CP3894-109 CP3894-110 CP3895-109 CP3895-8 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP3894-52/53S4 CP3720-182 CP3760-111 CP3894-120 CP3760-110 CP3894-144 CP3894-48 CP3894-129 1 CP3894-128 1 CP3894-130 2
CP3894-52/53S4M CP3720-182 CP3596-130 CP3894-108 CP3620-103 CP3894-144 CP3894-48 CP3894-129 1 CP3894-128 1 CP3894-130 2
CP4066-12/13/14/15S4M CP3720-182 CP4066-106 CP4066-107 CP3344-122 CP4066-6 CP3567-109 4
CP4090-2/3/4/5S4 CP3720-182 CP4090-114 CP4090-113 CP4090-112 CP3895-109 CP3895-8 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP4090-2/3/4/5S4M CP3720-182 CP4090-108 CP6294-121 CP4090-107 CP3895-109 CP3895-8 CP3895-107 1 CP3895-117 2 CP3895-106 1
CP4098-32/33VG CP4098-107
CP4098-34/35S4VG CP3720-182 CP4090-114 CP4090-113 CP4090-112 CP4098-30 CP4098-122 1 CP3895-107 1 CP3895-117 1 CP4098-126 1
CP4100-14/15T7L CP4100-113 CP4100-114 CP4100-115 CP4100-6
CP4110-2/3T7 CP3720-173 CP2290-50 CP4110-112 CP4110-111 CP3720-106 4
CP4131-16/17S0 CP3720-173 CP4296-110 CP4296-111 CP4131-20 CP4130-109 4
CP4131-4/5S0 CP3720-173 CP4296-110 CP4296-111 CP4131-7 CP4130-109 4
CP4132-2/3S0 CP3720-173 CP4145-101 CP3789-106 CP4131-20 CP4130-109 4
CP4140-2/3/4/5S0 CP3720-173 CP4140-107 CP4140-106 CP4140-6
CP4140-2/3/4/5S0M CP3720-173 CP4140-112 CP4140-111 CP4140-6
CP4144-10/11S7 CP3720-182 CP3636-107 CP3483-101 CP4144-101 CP4144-6 CP3645-104 2 CP3645-105 2
CP4144-2/3S7 CP3720-182 CP3636-107 CP3483-101 CP4144-101 CP4144-6 CP3645-104 2 CP3645-105 2
CP4145-2/3S7 CP3720-182 CP4145-101 CP4844-106 CP4145-106 CP4145-6 CP3645-104 2 CP3645-105 2
CP4145-8/9S7 CP3720-182 CP4145-101 CP4844-106 CP4144-101 CP4145-7 CP3645-104 2 CP3645-105 2
CP4152-2/3S4 CP3720-182 CP3567-108 CP3344-109 CP3344-122 CP4152-6 CP3567-109 4
CP4157-4S0C CP3432-123 CP6202-112 CP4157-105 CP4157-7 CP4154-111 1 CP4154-110 1 CP4154-109 2
CP4169-2E0 CP4469-101 CP4466-151 CP4466-152 CP4466-108
CP4176-3S0 CP4469-101 CP4466-151 CP4466-152 CP4466-108
CP4218-2/3/4/5S4 CP3720-182 CP4218-130 CP4218-129 CP4218-128 CP3555-112 CP3555-28 CP4218-109 2 CP4218-111 1 CP4218-108 1
CP4218-2/3/4/5S4M 7 CP3555-215 CP3555-214 CP3555-213 CP3555-112 CP3555-28 CP4218-109 2 CP4218-111 1 CP4218-108 1
CP4219-2/3/4/5S0 CP4970-125 CP2876-101 CP2270-92 CP5200-124 CP4219-6 CP4219-106 4
CP4226-2S0 CP4469-101 CP4226-103
CP4227-2S0 CP4469-101 CP4226-103
CP4227-6S0 CP4469-101 CP4226-103
CP4228-10/11S4 CP3720-173 CP3215-113 CP4228-107 CP4228-6 CP5100-210 4
CP4228-2/3/4/5S0 CP3720-173 CP3215-113 CP4228-106 CP4228-6 CP5100-210 4
CP4228-8/9S4 CP3720-173 CP3215-113 CP4228-107 CP4228-6 CP5100-210 4
CP4229-2/3/4/5S4 CP3720-173 CP4229-106 CP4228-107 CP4228-6 CP5100-210 4
CP4230-2/3S4L CP3720-182 CP4230-128 CP4230-127 CP4230-126 CP4230-109 CP4230-6 CP4230-113 1 CP4230-114 2 CP4230-112 1
CP4230-2/3S4M CP3720-182 CP4230-108 CP4230-107 CP4230-106 CP4230-109 CP4230-6 CP4230-113 1 CP4230-114 2 CP4230-112 1
CP4240-28/29S7M CP4970-125 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4240-2/3/4/5S7M CP4970-125 CP4240-111 CP4240-110 CP4240-109 CP4240-112 CP4240-6 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4240-30/31/32/33S7M CP4970-125 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4240-34/35/36/37S7M CP4970-125 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4240-6 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4240-38/39S7M CP4970-125 CP4970-113 CP4970-112 CP4970-111 CP4260-108 CP4240-40 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4240-42/43/44/45S7M CP4970-125 CP4970-113 CP4970-112 CP4970-111 CP4240-152 CP4240-41 CP4240-133 1 CP4240-145 1 CP4240-132 1 CP4240-144 1
CP4259-2/3/4/5S0M CP3720-173 CP4259-114 CP4259-112 CP4259-108 CP4260-105 CP4260-6 CP4240-145 2 CP4240-144 2
CP4259-2/3/4/5S7M CP3720-173 CP4259-114 CP4259-112 CP4259-108 CP4260-105 CP4260-6 CP4240-145 2 CP4240-144 2
CP4260-20/2/1/22/23S7M CP4970-125 CP4240-111 CP4240-110 CP4240-109 CP4260-115 CP4260-24 CP4240-145 2 CP4240-144 2
CP4260-26/27/28/29S7M CP4970-125 CP4240-111 CP4240-110 CP4240-109 CP4240-112 CP4240-40 CP4240-145 2 CP4240-144 2
CP4260-30/31/32/33S7M CP4970-125 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4260-7 CP4240-145 2 CP4240-144 2
CP4340-2/3/4/5S7L CP4970-125 CP4340-106 CP4340-107 CP5015-107 CP4578-101 CP4340-10 CP4218-127 1 CP4218-125 2 CP4218-126 1
CP4360-10/11S7L CP4970-125 CP4360-104 CP5820-109 CP5820-107 CP4360-14 CP4360-6 CP4970-104 4
CP4360-20/21S7L CP4970-125 CP4360-126 CP4360-127 CP4360-128 CP4370-104 CP4360-17 CP4970-104 4
CP4360-2/3/4/5S7L CP4970-125 CP4360-126 CP4360-127 CP4360-128 CP4360-17 CP4970-104 4
CP4360-8/9S7L CP4970-125 CP4360-104 CP5820-109 CP5820-107 CP4360-14 CP4360-6 CP4970-104 4
CP4370-2/3/4/5S7L CP4970-125 CP4370-105 CP4370-106 CP4370-107 CP4370-104 CP4360-17 CP4970-104 4
CP4380-2/3/4/5S7L CP4970-125 CP4380-101 CP4340-106 CP4340-107 CP4578-101 CP4340-10 CP4218-127 1 CP4218-125 2 CP4218-126 1
CP4398-2/3S0S 3486-268 CP4398-113 CP4398-111
CP4398-2/3S4S 3486-268 CP4398-113 CP4398-111
CP4466-12/13E0 CP4469-101 CP3666-106 CP3485-106 CP4466-108
CP4469-2E0 CP4469-101 CP3666-106 CP3485-106 CP4466-108
CP4477-2/3E0 CP4469-101 CP3666-106 CP3485-106 CP4466-108
CP4484-4S0 CP4469-101 CP3769-106 CP4484-101
CP4488-12/13E0 CP4469-101 CP4488-107 CP4488-106
CP4488-12/13E0M CP4469-101 CP4488-113 CP4488-112
CP4488-8E0 CP4469-101 CP4488-107 CP4488-106
CP4490-2/3E0 CP4469-101 CP4466-151 CP4466-152 CP4466-108
CP4498-2/3E0 CP4469-101 CP3666-106 CP3485-106 CP4466-108
CP4554-2/3S4 CP3720-182 CP4554-116 CP4554-115 CP3714-110 CP3554-108 CP3554-6 CP3555-192 4
CP4556-14/15/16/17S4 CP3720-173 CP3577-103 CP3344-122 CP4556-7 CP3567-109 4
CP4557-2/3S0M CP3720-173 CP4994-118 CP4995-117 CP3344-122 CP4556-6 CP3567-109 4
CP4558-2/3S0M CP3720-173 CP4558-107 CP4558-106 CP3344-122 CP4556-6 CP3567-109 4
CP4567-10/11S4 CP3720-173 CP3567-114 CP4270-3 CP4567-110 CP4567-7 CP4567-120 4
CP4567-12/13/14/15S4 CP3720-173 CP3567-114 CP4270-3 CP5100-117 CP4567-16 CP4567-120 4
CP4567-18/19/20/21S4 CP3720-173 CP3567-114 CP4270-3 CP4567-125 CP4567-17 CP4567-120 4
CP4567-2/3/4/5S4 CP3720-173 CP3567-114 CP4270-3 CP5100-116 CP4567-6 CP4567-120 4
CP4567-8/9S4 CP3720-173 CP3567-114 CP4270-3 CP4567-110 CP4567-7 CP4567-120 4
CP4568-6/7S0L CP3720-173 CP4568-105 CP4568-104 CP5100-116 CP4567-6 CP4567-120 4
CP4586-4/5E0 CP3720-182 CP3177-102
CP4586-5E7 CP3720-182 CP3177-102
CP4595-6/7S0L 92598 CP4595-133 CP4595-132 CP4595-134 CP4595-120 CP4595-14 CP4595-114 4
CP4596-4E0 CP3720-182 CP3178-102
CP4638-2E0 3486-229 CP4638-104
CP4649-2E0 3486-229 CP3697-104
CP4680-3S0 CP4469-101 CP4485-112 CP4485-113
CP4680-9S0 CP4469-101 CP4485-112 CP4485-113
CP4720-12/15S4M CP3720-173 CP4720-110 CP4720-111 CP4720-112 CP4720-6 CP4720-117 4
CP4720-13/14S4M CP3720-173 CP4720-110 CP4720-111 CP4720-112 CP4720-7 CP4720-117 4
CP4751-10/11S0L CP3720-182 CP4751-129 CP5751-109 CP4751-13 CP6751-111 2 CP6751-110 2
CP4751-8/9S0L CP3720-182 CP4751-129 CP4751-104 CP4751-12 CP6751-111 2 CP6751-110 2
CP4760-8/9S0M CP3720-173 CP4760-108 CP4760-107 CP4760-106 CP4760-115 CP4760-7 CP4760-113 1 CP4760-112 1 CP4720-108 2
CP4761-10/11S0L CP3720-182 CP4761-111 CP5751-109 CP4751-13 CP6751-111 2 CP6751-110 2
CP4761-8/9S0L CP3720-182 CP4761-111 CP4751-104 CP4751-12 CP6751-111 2 CP6751-110 2
CP4771-8/9S0L CP3720-182 CP4771-110 CP4751-104 CP4751-12 CP6751-111 2 CP6751-110 2
CP4781-10/11S0L CP3720-182 CP4781-104 CP5751-109 CP4751-13 CP6751-111 2 CP6751-110 2
CP4848-2S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-6 CP4848-107 2 CP4848-108 4
CP4848-3S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-7 CP4848-107 2 CP4848-108 4
CP4848-4S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-8 CP4848-107 2 CP4848-108 4
CP4848-5S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-9 CP4848-107 2 CP4848-108 4
CP4849-2R0L CP4849-104 CP4849-105 CP4849-6 CP4848-107 2 CP4848-108 4
CP4849-2S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-6 CP4848-107 2 CP4848-108 4
CP4849-3R0L CP4849-104 CP4849-105 CP4849-7 CP4848-107 2 CP4848-108 4
CP4849-3S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-7 CP4848-107 2 CP4848-108 4

www.apracing.com +44 (0)24 7663 9595

 Caliper Spare Parts Brake Calipers 9

Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP4849-4R0L CP4849-106 CP4849-107 CP4849-8 CP4848-107 2 CP4848-108 4
CP4849-4S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-8 CP4848-107 2 CP4848-108 4
CP4849-5R0L CP4849-106 CP4849-107 CP4849-9 CP4848-107 2 CP4848-108 4
CP4849-5S0MC CP4970-125 CP4848-104 CP4848-105 CP4848-9 CP4848-107 2 CP4848-108 4
CP4907-2/3/4/5S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4907-6 CP4907-111 1 CP4907-109 2 CP4907-110 1
CP4907-2/3/4/5S4 CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4907-6 CP4907-111 1 CP4907-109 2 CP4907-110 1
CP4907-2/3/4/5S4L CP3720-173 CP4907-106 CP4907-107 CP4907-108 CP3796-134 CP4907-6 CP4907-111 1 CP4907-109 2 CP4907-110 1
CP4909-10/11S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4909-7 CP4910-119 1 CP4096-126 2 CP4910-118 1
CP4909-10/11S4 CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4909-7 CP4910-119 1 CP4096-126 2 CP4910-118 1
CP4909-4/5S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4909-6 CP4910-119 1 CP4096-126 2 CP4910-118 1
CP4910-10/11/12/13S0 CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-135 CP4910-14 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4910-10/11/12/13S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4910-14 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4910-16/17/18/19S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4910-15 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4910-18/19S4 CP3720-173 CP4910-141 CP4910-140 CP3344-192 CP3796-134 CP4910-15 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4910-26/27/28/29S0 CP3720-173 CP4910-156 CP4910-155 CP4910-154 CP3796-134 CP4910-25 CP4910-159 1 CP4910-158 1 CP3894-130 2
CP4910-30/31S4M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-134 CP4910-24 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4910-32/33/34/35S0 CP3720-173 CP4910-156 CP4910-155 CP4910-154 CP3796-135 CP4910-36 CP4910-163 1 CP4910-162 1 CP3894-130 2
CP4910-6/7/8/9S0M CP3720-173 CP4910-116 CP4910-115 CP4910-114 CP3796-135 CP4910-14 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4915-4/5S4M CP3720-173 CP4915-106 CP4910-116 CP4910-115 CP3796-135 CP4910-14 CP4910-119 1 CP3894-130 2 CP4910-118 1
CP4920-10/11S0M CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4920-10/11/12/13S4 CP3720-182 CP4920-116 CP4920-115 CP4920-114 CP3895-109 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4920-12/13S4M CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4920-14/15/16/17S0M CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP4894-142 CP4894-31 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4920-8/9S0M CP3720-182 CP4910-122 CP4910-121 CP4910-120 CP3895-109 CP4894-54 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4921-4/5S4M CP3720-182 CP4921-106 CP4910-122 CP4910-121 CP3895-109 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4922-2/3/4/5S4M CP3720-182 CP4910-121 CP4922-109 CP4922-108 CP3895-109 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4922-8/9S4M CP3720-182 CP4910-121 CP4922-109 CP4922-108 CP3894-131 CP4894-50 CP4894-157 1 CP3894-130 2 CP4894-156 1
CP4960-10/11S0M CP3720-182 CP4960-110 CP4960-111 CP4960-112 CP4240-112 CP4960-6
CP4960-2/3/4/5S0M CP3720-182 CP4960-104 CP4960-105 CP4960-106 CP4240-112 CP4960-6
CP4960-8/9S0M CP3720-182 CP4960-110 CP4960-111 CP4960-112 CP4240-112 CP4960-6
CP4970-22/23S0M CP4970-125 CP4970-113 CP4970-112 CP4970-111 CP4979-107 CP4970-11 CP4970-104 4
CP4970-2/3S0M CP4970-125 CP4970-113 CP4970-112 CP4970-111 CP4979-107 CP4970-11 CP4970-104 4
CP5000-10/11/12/13S4 CP3720-182 CP5000-109 CP3714-111 CP3714-190 CP3714-2 CP3714-153 4
CP5000-20/21/22/23S4 CP3720-182 CP3344-192 CP5000-209 CP4890-101 CP5000-25
CP5000-56/57/58/59S4 CP3720-173 CP3584-101 CP3434-116 CP5200-110 CP5000-49 CP5200-306 2 CP5200-307 2
CP5006-2/3S4 CP3720-173 CP3344-192 CP5000-209 CP4890-101 CP3720-34 CP5006-106 4
CP5015-2/3/4/5S4 CP4970-125 CP5015-108 CP5015-110 CP5015-106 CP5015-6 CP5300-113 4
CP5016-2/3/4/5S4 CP4970-125 CP5015-107 CP5015-109 CP5015-106 CP5015-6 CP5300-113 4
CP5017-2/3/4/5S4 CP4970-125 CP5015-107 CP5015-108 CP5015-106 CP5015-6 CP5300-113 4
CP5018-2/3/4/5S4 CP4970-125 CP5015-108 CP5015-110 CP5015-106 CP5015-6 CP5300-113 4
CP5020-20/21S0 CP3720-173 CP3177-102 CP5310-21 CP5310-103 4
CP5030-10S0 CP3720-173 CP5030-108 CP5030-107 CP5030-7
CP5030-11S0 CP3720-173 CP5030-108 CP5030-107 CP5030-6
CP5030-12/15S0 CP3720-173 CP5030-108 CP5030-107 CP5030-16
CP5030-13/14S0 CP3720-173 CP5030-108 CP5030-107 CP5030-17
CP5030-8S0 CP3720-173 CP5030-108 CP5030-107 CP5030-6
CP5030-9S0 CP3720-173 CP5030-108 CP5030-107 CP5030-7
CP5040-10/11/12/13S4 CP3720-173 CP3215-113 CP5100-116 CP5000-54 CP5100-210 2 CP5100-211 2
CP5040-20/21/22/23S4 CP3720-182 CP5000-109 CP3714-111 CP3714-190 CP3714-2 CP3714-153 4
CP5040-2/3/4/5S4 CP3720-173 CP3584-101 CP3434-116 CP5200-124 CP5000-44 CP5200-306 2 CP5200-307 2
CP5040-30/31/32/33S4 CP3720-173 CP3636-107 CP3394-110 CP3795-101 CP5040-7 CP3799-111 1 CP3846-101 2 CP3799-110 1
CP5040-38/39S4 CP3720-173 CP3584-101 CP3434-116 CP5200-124 CP5000-44 CP5200-306 2 CP5200-307 2
CP5045-10/11S7L CP5820-115 CP5045-110 CP5045-111 CP5045-7 CP3714-153 4
CP5045-2/3S7L CP5820-115 CP5045-106 CP5045-107 CP5045-7 CP3714-153 4
CP5045-8/9S7L CP5820-115 CP5045-110 CP5045-111 CP5045-7 CP3714-153 4
CP5048-2/3/4/5S0M CP3720-182 CP5048-508 CP6294-121 CP5048-6 CP5048-507 4
CP5055-2/3/4/5S7 CP4970-125 CP5055-107 CP4920-115 CP5055-10 CP5055-109 2 CP5055-108 2
CP5060-10/11/12/13S4 CP4970-125 CP4910-156 CP4910-155 CP4910-154 CP5555-126 CP5560-6 CP5555-120 4
CP5060-2/3/4/5S4 CP4970-125 CP4910-156 CP4910-155 CP4910-154 CP5555-109 CP5560-12 CP5555-120 4
CP5066-2/3/4/5S0 CP3720-182 CP3650-107 CP5066-6
CP5066-2/3/4/5S0M CP3720-182 CP6294-121 CP5066-6
CP5070-6/8S7 CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP5070-104 CP5070-10 CP5070-115 2 CP4098-122 2
CP5070-7/9S7 CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP5070-104 CP5070-11 CP5070-115 2 CP4098-122 2
CP5090-2/3/4/5S4 CP4970-125 CP3636-107 CP3394-110 CP3795-101 CP5080-109 CP5080-108 4
CP5099-8/9S4S 3486-268 CP5099-108 CP5099-109 3662-290
CP5100-22/23BK CP5100-149
CP5100-26/27/28/29S4 CP3720-173 CP2409-160 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5100-32/33/34/35S4 CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5100-802/803/804/805S4 CP3720-173 CP2409-160 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5100-806/807/808/809S4 CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5100-806/807S4R2 CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5100-810/811/812/813S4 CP3720-173 CP2409-160 CP5100-177 CP5100-40 CP5100-210 2 CP5100-211 2
CP5104-2/3S4 CP3720-183 CP2409-160 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5104-802/803/804/805S4 CP3720-183 CP2409-160 CP5100-116 CP5104-10 CP5100-210 2 CP5100-211 2
CP5105-10/11/12/13S4 CP3720-173 CP2409-160 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5105-6/7/8/9S4 CP3720-173 CP3228-103 CP5100-149 CP5100-18 CP5100-210 2 CP5100-211 2
CP5106-2/3/4/5S4 CP3720-173 CP3228-103 CP5106-114 CP5106-6 CP5100-210 4
CP5108-4/5S4 CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5108-4/5S4SV CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5108-802/803/804/805S4 CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5108-802/803/804/805S4R2 CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5108-802/803S4VG CP3720-173 CP5108-106 CP4296-111 CP5100-117 CP5100-11 CP5100-210 2 CP5100-211 2
CP5108-806/807/808/809S4 CP3720-173 CP5108-106 CP4296-111 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5116-2/3/4/5S0 CP3720-182 CP5555-108 CP2877-101 CP5116-6 CP5234-117 4
CP5118-2/3S0RD CP4970-125 CP5118-103(6026) CP5119-107 CP5118-10
CP5119-12/13S4 CP3720-173 CP5119-104 CP5119-111 CP5119-144 CP5111-12
CP5119-22/23T0 CP3720-173 CP5235-108 CP5119-144 CP5111-10
CP5119-36/37T0 CP3720-173 CP5235-108 CP5111-10
CP5119-44/45T0 CP3720-173 CP5235-108 CP5119-155 CP5119-46
CP5119-48/49TO CP3720-173 CP5235-108 CP5119-144 CP5111-10
CP5119-4/5T4 CP3720-173 CP5119-104 CP5111-10
CP5119-50/51T0 CP3720-173 CP5235-108 CP5119-144 CP5111-10
CP5119-8/9T0 CP3720-173 CP5235-108 CP5119-107 CP5119-106
CP5126-2/3T0 CP3720-173 CP5126-106(6026) CP5119-144 CP5126-10
CP5128-2/3T0 CP4970-125 CP5128-104(6026) CP5119-144 CP5128-10
CP5129-2/3/4/5S0 CP5820-115 CP6235-110 CP5129-106 CP5129-6 CP5234-117 4
CP5138-2/3/4/5S0 CP5820-115 CP6235-110 CP5129-106 CP5138-106 CP5129-6 CP5234-117 4
CP5139-2/3S0 CP5820-115 CP6235-110 CP5129-106 CP5139-107 2 CP5139-106 2
CP5144-18/19S4 CP3720-173 CP5108-106 CP5144-114 CP5144-14 CP5100-210 2 CP5100-211 2
CP5144-18/19S4R2 CP3720-173 CP5108-106 CP5144-114 CP5144-14 CP5100-210 2 CP5100-211 2
CP5144-802/803S4 CP3720-183 CP5108-106 CP5144-114 CP5144-14 CP5100-210 2 CP5100-211 2
CP5144-802/803S4R2 CP3720-183 CP5108-106 CP5144-114 CP5144-14 CP5100-210 2 CP5100-211 2
CP5144-802/803S4VG CP3720-183 CP5108-106 CP5144-114 CP5144-14 CP5100-210 2 CP5100-211 2
CP5145-2/3S7 CP3720-173 CP5145-103 CP5145-104 CP5145-10 CP3720-106 4
CP5147-802/803/804/805S4 CP3720-183 CP5108-106 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5147-802/803S4VG CP3720-183 CP5108-106 CP5100-116 CP5100-10 CP5100-210 2 CP5100-211 2
CP5148-12/14S0 CP4970-125 CP5148-116 CP3178-102 CP5148-10 CP5148-110 4
CP5148-13/15S0 CP4970-125 CP5148-116 CP3178-102 CP5148-11 CP5148-110 4
CP5148-16/18S0 CP4970-125 CP5148-116 CP3178-102 CP5148-20 CP5148-110 4
CP5148-17/19S0 CP4970-125 CP5148-116 CP3178-102 CP5148-21 CP5148-110 4
CP5148-2/4S0 CP4970-125 CP5148-116 CP3178-102 CP5148-10 CP5148-110 4
CP5148-2/4S0M CP4970-125 CP5148-118 CP4760-107 CP5148-10 CP5148-110 4
CP5148-3/5S0 CP4970-125 CP5148-116 CP3178-102 CP5148-11 CP5148-110 4
CP5148-3/5S0M CP4970-125 CP5148-118 CP4760-107 CP5148-11 CP5148-110 4
CP5156-2/3S0 CP3720-173 CP5311-103 CP5119-144 CP5111-10

www.apracing.com +44 (0)24 7663 9595

10 Brake Calipers Caliper Spare Parts
Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP5157-2/3S0 CP3720-173 CP5157-104 CP5119-144 CP5111-10
CP5200-12/14S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-32/33/34/35S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-40/41/42/43S4 CP3720-173 CP2889-105 CP3357-111 CP5200-162 CP5200-31 CP5200-306 2 CP5200-307 2
CP5200-74/75/76/77S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-802/803/804/805S4 CP3720-173 CP2409-124 CP2290-50 CP5200-110 CP5200-6 CP5200-306 2 CP5200-307 2
CP5200-806/807/808/809S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-806/807/808/809S4R2 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-806/807/808/809S4S2 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-806/807/808/809S4VG CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-810/811/812/813S4 CP3720-173 CP2409-124 CP2290-50 CP5200-110 CP5200-6 CP5200-306 2 CP5200-307 2
CP5200-814/815S4 CP3720-173 CP2889-105 CP3357-111 CP5200-313 CP5200-57 CP5200-306 2 CP5200-307 2
CP5200-824/825/826/827S4 CP3720-173 CP2889-105 CP3357-111 CP5200-162 CP5200-31 CP5200-306 2 CP5200-307 2
CP5200-828/829/830/831S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-828/829/830/831S4R2 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-828/829S4VG CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-832/833S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5200-836/837S4 CP3720-173 CP2889-105 CP3357-111 CP5200-191 CP5200-190 CP5200-306 2 CP5200-307 2
CP5200-836/837S4R2 CP3720-173 CP2889-105 CP3357-111 CP5200-191 CP5200-190 CP5200-306 2 CP5200-307 2
CP5200-90/91S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5205-14/15/16/17S4 CP3720-173 CP4090-112 CP5205-101 CP5200-110 CP5200-6 CP5200-306 2 CP5200-307 2
CP5205-18/19/20/21S4 CP3720-173 CP2889-105 CP3357-111 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5206-4/5S4 CP3720-173 CP5206-106 CP5200-124 CP5200-16 CP5200-306 2 CP5200-307 2
CP5207-4/5/6/7S4 CP3720-173 CP3650-107 CP5207-105 CP5207-104 CP5200-306 2 CP5200-307 2
CP5207-8/9S4 CP3720-173 CP3650-107 CP5207-105 CP5207-104 CP5200-306 2 CP5200-307 2
CP5208-12/13/14/15S4 CP3720-173 CP2409-124 CP3639-107 CP5208-208 CP5208-8 CP5200-306 2 CP5200-307 2
CP5210-2/3/4/5S0M CP3720-182 CP5210-106 CP5210-105 CP5210-104 CP4612-110 CP5611-6
CP5211-12/13S4 CP3720-183 CP2260-66 CP5211-10
CP5211-12/13S4RD CP3720-183 CP2260-66 CP5211-10
CP5211-12/13S4SV CP3720-183 CP2260-66 CP5211-10
CP5211-12/13S4YW CP3720-183 CP2260-66 CP5211-10
CP5211-22/23S0 CP3720-173 CP2260-66 CP5211-10
CP5211-24/25S0 CP3720-173 CP2260-66 CP5211-17
CP5211-2/3S4 CP3720-173 CP2260-66 CP5211-10
CP5211-2/3S4RD CP3720-173 CP2260-66 CP5211-10
CP5260-2/3/4/5S7L CP4970-125 CP5260-109 CP5260-110 CP5260-111 CP5260-108 CP5260-6 CP5260-106 4
CP5266-2/3/4/5S0M CP3720-182 CP5166-106 CP5266-6
CP5300-14/15S4 CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 4
CP5300-4/5/6/7S4 CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 4
CP5300-8/9S4 CP3720-173 CP5300-108 CP5300-109 CP5300-115 CP5300-10 CP5300-113 4
CP5309-11 CP4970-125
CP5309-2/3S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP5309-10 CP5309-106 1 CP5309-107 1 CP5320-107 2
CP5310-4/5S0 CP3720-173 CP3177-102 CP5310-22 CP5310-103 4
CP5311-22/23S0 CP3720-173 CP5311-103 CP5211-10
CP5311-24/25S0 CP3720-173 CP5311-103 CP5211-10
CP5315-2/3S0 CP4970-125 CP5315-103(6026) CP5315-10
CP5316-2/3S0 CP4970-125 CP5128-104(6026) CP5119-144 CP5317-10
CP5316-2/3S0RD CP4970-125 CP5128-104(6026) CP5119-144 CP5317-10
CP5317-2/3S0 CP4970-125 CP5317-103(6026) CP5119-144 CP5317-10
CP5317-6/7S0 CP4970-125 CP5317-103(6026) CP5317-10
CP5317-6/7S0R2 CP4970-125 CP5317-103(6026) CP5317-10
CP5317-8/9S0 CP4970-125 CP5317-103(6026) CP5119-144 CP5317-10
CP5319-2/3S0 CP4970-125 CP6606-109(6026) CP6609-106(6026) CP5309-10 CP5309-106 1 CP5309-107 1 CP5320-107 2
CP5320-2/3S4 CP3720-173 CP5320-106 CP5320-107 4
CP5320-2/3S7 CP3720-173 CP5320-106 CP5320-107 4
CP5325-2/3S0 CP4970-125 CP5317-103(6026) CP5119-144 CP5317-10
CP5410-2/3/4/5S0L CP5820-115 CP5410-106 CP5410-107 CP4751-104 CP5610-6 CP5610-106 4
CP5510-14/15S0L CP5820-115 CP5510-116 CP5410-106 CP5510-106 CP5510-6 CP5610-106 4
CP5510-2/3/4/5S0L CP5820-115 CP5510-116 CP5410-106 CP4751-104 CP5610-6 CP5610-106 4
CP5515-4/5S0 CP5820-115 CP5515-110 CP5515-111 CP4751-104 CP5610-6 CP5610-106 4
CP5515-8/9S0 CP5820-115 CP5515-110 CP5515-111 CP5510-106 CP5510-6 CP5610-106 4
CP5555-12/13/14/15S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-2/3S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-4/5S7 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-66/67/68/69S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 4
CP5555-802/803/804/805S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-802/803S4R2 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-802/803S4VG CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-806/807/808/809S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 4
CP5555-808/809/810/811S4R2 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 4
CP5555-808/809S4VG CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 4
CP5555-810/811/812/813S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-814/815/816/817S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-814/815/816/817S4R2 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-814/815/816/817S4VG CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-818/819S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-824/825S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-70 CP5555-120 4
CP5555-826/827/828/829S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-126 CP5555-11 CP5555-120 4
CP5555-830/831S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-830/831S4R2 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-109 CP5555-10 CP5555-120 4
CP5555-838/839S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP6136-109 CP5555-10 CP5555-120 4
CP5555-84/85S4 CP3720-173 CP5555-108 CP3650-107 CP2409-124 CP5555-155 CP5555-46 CP5555-174 4
CP5560-32/33/34/35S0L CP4970-125 CP5560-108 CP5560-109 CP5560-110 CP5555-126 CP5560-26 CP5555-120 4
CP5570-802/803/804/805S4 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5570-802/803/804/805S4R2 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5570-804/805S4VG CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5570-806/807S4 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5570-806/807S4R2 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5570-810/811S4 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5555-174 4
CP5570-814/815/816/817S4 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5200-124 CP5555-56 CP5555-174 4
CP5575-802/803/804/805S4 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5575-106 4
CP5575-802/803/804/805S4R2 CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5575-106 4
CP5575-802/803S4VG CP3720-173 CP4689-108 CP5145-103 CP2889-105 CP5555-157 CP5555-71 CP5575-106 4
CP5589-2/3/4/5S4 CP3720-182 CP4689-108 CP3645-111 CP4689-106 CP5589-106 CP5589-6 CP5200-306 4
CP5610-2/3/4/5S0L CP5820-115 CP5410-107 CP5610-108 CP4751-104 CP5610-6 CP5610-106 4
CP5620-2/3S4 CP3720-173 CP3579-108 CP4890-101 CP3620-8 CP3720-106 4
CP5687-2/3/4/5S4L CP4970-125 CP4380-101 CP4340-106 CP4340-107 CP5870-6 CP6230-111 4
CP5710-2/3/4/5S0L CP5820-115 CP5410-107 CP4751-104 CP5610-6 CP5610-106 4
CP5751-14/15/16/17S0L CP3720-182 CP5751-145 CP5751-147 CP4751-104 CP5751-28 CP6751-111 2 CP6751-110 2
CP5751-18/19/20//21S0L CP3720-182 CP5751-145 CP5751-147 CP5751-109 CP5751-29 CP6751-111 2 CP6751-110 2
CP5755-4/5S0L CP3720-182 CP5755-111 CP5755-110 CP5755-108 CP5755-107 4
CP5756-2S0L CP3720-182 CP5756-106 CP5755-108 CP5755-107 4
CP5756-4S0L CP3720-182 CP5756-106 CP5756-112 CP5755-107 4
CP5757-2S0L CP3720-182 CP5755-110 CP5755-108 CP5755-107 4
CP5761-10/11S0L CP3720-182 CP5751-145 CP5751-109 CP5751-29 CP6751-111 2 CP6751-110 2
CP5761-8/9S0L CP3720-182 CP5751-145 CP4751-104 CP5751-28 CP6751-111 2 CP6751-110 2
CP5771-10/11/12/13S0L CP3720-182 CP5771-131 CP5751-145 CP4751-104 CP5751-28 CP6751-111 2 CP6751-110 2
CP5771-14/15/16/17S0L CP3720-182 CP5771-131 CP5751-145 CP5751-109 CP5751-29 CP6751-111 2 CP6751-110 2
CP5788-2/3/4/5S0L CP4970-125 CP4090-111 CP5830-115 CP5788-6 CP5788-106 4
CP5789-2/3/4/5/S0LP CP4970-125 CP5990-107 CP5990-106 CP5789-6 CP5789-105 4
CP5789-2/3/4/5S0MP CP4970-125 CP5789-107 CP5789-106 CP5789-6 CP5789-105 4
CP5800-12/13S0L CP3720-182 CP5810-113 CP5810-114 CP5810-115 CP5800-107 CP5800-6 CP5800-109 4
CP5800-2/3/4/5S0L CP3720-182 CP5810-113 CP5810-114 CP5810-115 CP5800-107 CP5800-6 CP5800-109 4
CP5805-2/3/4/5S0L CP3720-182 CP4761-111 CP4751-129 CP5751-145 CP4751-104 CP5805-6 CP6751-111 2 CP6751-110 2
CP5806-2/3S0L CP3720-182 CP4761-111 CP4751-129 CP5751-145 CP4751-104 CP5805-6 CP6751-111 2 CP6751-110 2

www.apracing.com +44 (0)24 7663 9595

 Caliper Spare Parts Brake Calipers 11

Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP5810-2/3/4/5S0L CP5820-115 CP5810-113 CP5810-114 CP5810-115 CP5810-6 CP5810-105 1 CP5810-104 4
CP5810-2/3/4/5S0M CP5820-115 CP5810-110 CP5810-111 CP5810-112 CP5810-6 CP5810-105 1 CP5810-104 4
CP5820-2/3/4/5S0L CP5820-115 CP5820-109 CP5820-107 CP5820-108 CP5820-6 CP5820-112 1 CP5820-111 4
CP5820-2/3/4/5S0M CP5820-115 CP5820-117 CP5820-119 CP5820-118 CP5820-6 CP5820-112 1 CP5820-111 4
CP5825-4S0M CP5820-115 CP5820-117 CP5820-119 CP5820-118 CP5825-6
CP5828-2/3/4/5S7L CP5820-115 CP5828-107 CP5828-109 CP5828-108 CP5828-6 CP5828-106 1 CP5828-105 4
CP5830-12/13/14/15S0L CP5820-115 CP5830-124 CP5830-123 CP5830-109 CP5830-6 CP5830-108 4
CP5835-4/5S0 CP5820-115 CP5835-106 CP5835-107 CP5830-109 CP5830-6 CP5830-108 4
CP5840-2/3S0 CP5820-115 CP5840-112 CP5840-111 CP5840-6 CP5840-106 4
CP5840-4S0 CP5820-115 CP5840-112 CP5840-111 CP5840-7 CP5840-106 4
CP5841-2/3/4/5S0 CP5820-115 CP5841-106 CP5841-107 CP5841-6 CP5840-106 4
CP5842-2/3/4/5S0M CP5820-115 CP5842-106 CP5842-104 CP5842-105 CP5842-6 CP5842-107 1 CP5820-111 4
CP5842-4/5S0MC CP5820-115 CP5842-9 CP5842-8 CP5842-7 CP5842-6 CP5842-107 1 CP5820-111 4
CP5850-2/3S0M CP5820-115 CP5850-107 CP5850-108 CP5850-6 CP5850-106 2 CP5820-111 4
CP5865-2/3/4/5S7M CP4970-125 CP5870-106 CP5870-104 CP5870-105 CP5870-6 CP6230-111 4
CP5866-2/3/4/5S7M CP4970-125 CP5870-106 CP5870-104 CP5870-105 CP5866-104 CP5870-6 CP6230-111 4
CP5870-2/3/4/5S7M CP4970-125 CP5870-106 CP5870-104 CP5870-105 CP5870-6 CP6230-111 4
CP5880-2/3S0L CP5820-115 CP5880-104 CP5880-105 CP5880-6 CP5880-106 1 CP5880-107 4
CP5880-4/5S0M CP5820-115 CP5880-109 CP5880-108 CP5880-6 CP5880-106 1 CP5880-107 4
CP5890-2/3S0L CP5820-115 CP5890-105 CP5890-108 CP5890-109 CP5890-6 CP5890-104 1 CP5890-106 4
CP5890-2/3/4/5S0M CP5820-115 CP5890-111 CP5890-112 CP5890-113 CP5890-6 CP5890-104 1 CP5890-106 4
CP5971-2/3S7M CP4970-125 CP5961-105 CP5961-104 CP5970-114 CP5970-104 CP5970-7 CP4970-104 4
CP5971-4/5S7M CP4970-125 CP5961-105 CP5961-104 CP5970-114 CP5970-104 CP5970-8 CP4970-104 4
CP6016-2/3S0 CP4970-125 CP6016-106 CP6016-10
CP6030-20/21S0 CP3720-173 CP6030-107 CP6030-108 CP6030-110 CP6030-35 CP5100-210 4
CP6030-2/3S0 CP3720-173 CP6030-107 CP6030-108 CP6030-109 CP6030-6 CP5100-210 4
CP6040-2/3S7MP CP4970-125 CP6040-108 CP6040-109 CP6040-110 CP5970-104 CP6040-6 CP4970-104 4
CP6044-2/3S7M CP4970-125 CP5962-105 CP5961-104 CP6290-131 CP5970-104 CP6040-6 CP4970-104 4
CP6050-2/3/4/5S0M CP3720-182 CP6050-105 CP6050-106 CP6050-6 CP6050-108 2 CP6050-109 2
CP6050-2/3/4/5S7M CP3720-182 CP6050-105 CP6050-106 CP6050-6 CP6050-108 2 CP6050-109 2
CP6051-2/3/4/5S0L CP3720-173 CP6051-105 CP6051-106 CP6051-6 CP6050-108 2 CP6050-109 2
CP6055-2/4S7MP CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6055-6 CP6055-108 1 CP6055-107 4
CP6055-3/5S7MP CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6055-7 CP6055-108 1 CP6055-107 4
CP6056-2/3/4/5S7MP CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6056-7 CP6056-104 1 CP6055-107 4
CP6057-2/3/4/5S7MP CP4970-125 CP6055-110 CP6055-111 CP6057-104 CP6056-7 CP6056-104 1 CP6055-107 4
CP6058-2/3/4/5S7MP CP4970-125 CP6057-105 CP6055-111 CP6057-104 CP6056-7 CP6056-104 1 CP6055-107 4
CP6060-2/3S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6060-6 CP6060-106 1 CP6060-107 4
CP6060-4/5S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6060-7 CP6060-106 1 CP6060-107 4
CP6061-4/5S7MP CP4970-125 CP6060-122 CP6060-120 CP6061-105 CP6060-7 CP6060-107 4
CP6064-2/3S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6064-6 CP6060-106 1 CP6060-107 4
CP6064-4/5S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6064-8 CP6060-106 1 CP6060-107 4
CP6065-10/11S7MP CP4970-125 CP6040-108 CP6065-110 CP6040-110 CP6065-7 CP6065-104 1 CP6060-107 4
CP6065-2/3S7MP CP4970-125 CP6040-108 CP6040-109 CP6040-110 CP6065-6 CP6065-104 1 CP6060-107 4
CP6065-4/5S7MP CP4970-125 CP6040-108 CP6065-110 CP6040-110 CP6065-7 CP6065-104 1 CP6060-107 4
CP6065-8/9S7MP CP4970-125 CP6040-108 CP6040-109 CP6040-110 CP6065-6 CP6065-104 1 CP6060-107 4
CP6066-4/5S7MP CP4970-125 CP6040-108 CP6040-109 CP6060-123 CP6065-7 CP6065-104 1 CP6060-107 4
CP6070-12/13S7L CP4970-125 CP6070-120 CP5015-109 CP6070-6 CP6070-106 1 CP6070-107 4
CP6070-14/15S7L CP4970-125 CP6070-120 CP5015-109 CP6070-7 CP6070-106 1 CP6070-107 4
CP6070-2/3/4/5S7MC CP4970-125 CP6070-110 CP6070-111 CP6070-6 CP6070-106 1 CP6070-107 4
CP6070-2/3/4/5S7MP CP4970-125 CP6070-110 CP6070-111 CP6070-6 CP6070-106 1 CP6070-107 4
CP6071-2/3/4/5S7MP CP4970-125 CP6070-110 CP6070-111 CP6071-6 CP6070-106 1 CP6070-107 4
CP6075-2/3S7MC CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6075-6 CP6075-106 1 CP6075-105 4
CP6075-4/5S7MC CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6075-7 CP6075-106 1 CP6075-105 4
CP6080-2/3S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6460-105 CP6060-6 CP6060-107 4
CP6080-4/5S7MP CP4970-125 CP6060-122 CP6060-120 CP6060-121 CP6460-105 CP6060-7 CP6060-107 4
CP6085-2/3S7MC CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6075-6 CP6075-106 1 CP6075-105 4
CP6085-4/5S7MC CP4970-125 CP6055-110 CP6055-111 CP6055-112 CP6075-7 CP6075-106 1 CP6075-105 4
CP6114-10/11/12/13S0 CP4970-125 CP6114-106 CP5119-144 CP6114-105
CP6120-2/3S0 CP4970-125 CP5235-108 CP6120-103 CP6120-6
CP6121-2/3S0 CP4970-125 CP6121-104 CP6120-103 CP6120-6
CP6136-4/5S0L CP4970-125 CP6136-114 CP6136-116 CP6136-110 CP6136-107 CP6136-10 CP6508-102 4
CP6136-8/9S0L CP4970-125 CP6136-114 CP6136-116 CP6136-110 CP6136-107 CP6136-10 CP5555-120 4
CP6138-2/3S0L CP4970-125 CP6136-114 CP6136-115 CP6136-111 CP6138-106 CP6138-10 CP6508-102 4
CP6148-2/5R0M CP6148-108 CP6148-109 CP6148-6 CP6148-107 2 CP6148-106 2
CP6148-3/4R0M CP6148-108 CP6148-109 CP6148-7 CP6148-107 2 CP6148-106 2
CP6215-10/11/12/13S7L CP4970-125 CP6260-107 CP5828-108 CP5760-6 CP6215-104 1 CP5760-105 4
CP6215-2/3/4/5S0L CP4970-125 CP6215-106 CP6215-105 CP5760-6 CP6215-104 1 CP5760-105 4
CP6215-6/7/8/9S0L CP4970-125 CP6215-109 CP6215-110 CP5760-6 CP6215-107 2 CP6215-108 2 CP6215-104 1
CP6220-2/3/4/5S0 CP3720-182 CP5070-107 CP5070-106 CP5070-105 CP6220-113 CP6220-21 CP6220-110 4
CP6230-2/3/4/5S7M CP3720-173 CP4970-113 CP4970-112 CP4970-111 CP6230-112 CP6230-21 CP6230-111 4
CP6238-2/3S0L CP4970-125 CP6136-114 CP6136-115 CP6136-111 CP6238-106 CP6238-10 CP6238-110 4
CP6240-2/3/4/5S7M CP3720-173 CP4970-113 CP4970-112 CP4970-111 CP6230-112 CP6240-6 CP6230-111 4
CP6320-12/13/14/15R4M CP3720-177 CP6320-107 CP6320-111 CP6320-106 4
CP6320-14/15R4 CP2879-103 CP2279-6 CP6320-111 CP6320-106 4
CP6320-22/23/24/25S4M CP4970-125 CP3720-177 CP6320-107 CP6320-111 CP6320-106 4
CP6340-12/13/14/15R4M CP6320-108 CP6320-107 CP6320-110 CP6320-106 4
CP6340-24/25/26/27R4M CP4970-125 CP6320-108 CP6320-107 CP6320-110 CP6320-106 4
CP6340-26/27/28/29S4M CP4970-125 CP6320-108 CP6320-107 CP6320-110 CP6320-106 4
CP6340-28/29R4M CP4970-125 CP6320-108 CP6320-107 CP6320-110 CP6320-106 4
CP6340-2/3/4/5S4M 3486-229 CP6320-108 CP6320-107 CP6320-110 CP6320-106 4
CP6350-14/15S7M CP4970-125 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 4
CP6350-18/19S7M CP4970-125 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 4
CP6350-2/5S7M CP4970-125 CP6350-108 CP6350-107 CP6350-106 CP6350-109 CP6350-12 CP6350-110 4
CP6350-3/4S7M CP4970-125 CP6350-108 CP6350-107 CP6350-106 CP6350-109 CP6350-13 CP6350-110 4
CP6350-8/9S7M CP4970-125 CP6350-120 CP6350-119 CP6350-118 CP6350-109 CP6350-12 CP6350-110 4
CP6360-2/3S7L CP4970-125 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-7 CP6360-106 4
CP6360-4/5S7L CP4970-125 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-6 CP6360-106 4
CP6361-2/3S7L CP4970-125 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-7 CP6360-106 4
CP6361-4/5S7L CP4970-125 CP6360-104 CP4360-127 CP6360-105 CP6360-110 CP6360-6 CP6360-106 4
CP6420-2/3/4/5R4M CP3720-177 CP6320-107 CP6320-110 CP6320-106 4
CP6508-4/5S0 CP4970-125 CP6508-106 CP6508-107 CP6508-10 CP6508-102 8
CP6508-8/9S0 CP4970-125 CP6508-106 CP6508-107 CP6508-10 CP6508-102 8
CP6520-2/3/4/5R4M CP4970-125 CP3720-177 CP6320-107 CP6320-111 CP6320-106 4
CP6560-18/19R4L CP4970-125 CP6560-129 CP6560-130 CP6560-131 CP6560-106 1 CP6560-110 4
CP6560-2/3/4/5S4MP CP4970-125 CP6560-107 CP6560-108 CP6560-109 CP6560-106 1 CP6560-110 4
CP6561-2/3/4/5S4MP CP4970-125 CP6561-107 CP6561-108 CP6561-109 1 CP6561-106 4
CP6564-2/3R4L CP4970-125 CP6564-108 CP6564-109 CP6560-106 1 CP6560-110 4
CP6600-26/27/28/29S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6609-11 CP6200-103 4
CP6600-2/3/4/5S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6600-2/3/4/5S0R2 CP4970-125 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6600-2/3S0S2 CP4970-125 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6600-6/7/8/9S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6602-2/3/4/5S0 CP4970-125 CP6606-109(6026) CP6609-11 CP7040-110 4
CP6605-12/13S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6608-4/5S0 CP4970-125 CP6609-107(6026) CP6200-104 CP6600-10 CP6200-103 4
CP6609-2/3/4/5S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP6609-10 CP6200-103 4
CP6609-6/7/8/9S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP6609-11 CP6200-103 4
CP6609-6/7/8/9SOR2 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP6609-11 CP6200-103 4
CP6611-4/5S0 CP4970-125 CP6200-104 CP6609-11 CP6200-103 4
CP6611-8/9S0 CP4970-125 CP6200-104 CP5200-124 CP6609-11 CP6200-103 4
CP6617-4/5S0 CP4970-125 CP6606-109(6026) CP6609-11 CP7040-110 4
CP6624-2/3/4/5S0 CP4970-125 CP6606-109(6026) CP6609-106(6026) CP6609-11
CP6625-2/3/4/5S0 CP4970-125 CP6609-106(6026) CP6609-11
CP6625-6/7S0 CP4970-125 CP6609-106(6026) CP6609-11
CP6626-2/3S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6626-10 CP6200-103 4

www.apracing.com +44 (0)24 7663 9595

12 Brake Calipers Caliper Spare Parts
Bleed Q Q Q Q
Piston 1 - Piston 2 - Piston 3 Pad Retainer Fluid Pipe Wear Plate Wear Plate 2 Wear Plate 3 Wear Plate 4
Caliper Assemblies Screw Part t t t t
Part No. Part No. - Part No. Part No. Part No. 1 - Part No. - Part No. - Part No. - Part No.
No. y y y y
CP6627-2/3S0 CP4970-125 CP5118-103(6026) CP6622-10 CP6622-106 4
CP6627-2/3S0CL CP4970-125 CP5118-103(6026) CP6622-10 CP6622-106 4
CP6627-2/3S0R2 CP4970-125 CP5118-103(6026) CP6622-10 CP6622-106 4
CP6628-4/5S0B4 CP4970-125 CP5118-103 CP6628-107 CP6628-10 CP6622-106 4
CP6628-6/7S0R2 CP4970-125 CP5118-103 CP6628-107 CP6600-10 CP6622-106 4
CP6631-2/3S0 CP4970-125 CP6200-105(6026) CP6200-104 CP6618-10 CP6200-103 4
CP6634-2/3S0R2 CP4970-125 CP5118-103(6026) CP6622-10 CP6622-106 4
CP6650-2/3/4/5S7L CP4970-125 CP6260-107 CP5828-108 CP6261-108 CP6261-6 CP5760-105 4
CP6688-4/5E0M CP4469-101 CP6688-113
CP6720-18/19S4 CP4970-125 CP3567-108 CP3344-109 CP6720-143 CP5200-306 4
CP6720-22/23/24/25S4L CP4970-125 CP3567-116 CP3567-117 CP3394-113 CP5200-306 4
CP6720-6/7/8/9S4 CP4970-125 CP3567-108 CP3344-109 CP6720-101 CP5200-306 4
CP6720-6/7/8/9S4L CP4970-125 CP3567-116 CP3567-117 CP6720-101 CP5200-306 4
CP6730-2/3S4 CP4970-125 CP3349-103 CP6720-101 CP5200-306 4
CP6740-2/3S4 CP4970-125 CP6740-109 CP6720-101 CP5200-306 4
CP6740-2/3S4L CP4970-125 CP6740-110 CP6720-101 CP5200-306 4
CP6750-10/11/12/13S4L CP4970-125 CP6560-126 CP6560-127 CP6560-128 CP6750-113 CP6750-111 1 CP6750-112 2 CP6750-110 1
CP6750-14/15/16/17S4L CP4970-125 CP6560-126 CP6560-127 CP6560-128 CP6750-113 CP6750-111 1 CP6750-112 2 CP6750-110 1
CP6750-2/3/4/5S4L CP4970-125 CP6750-106 CP6750-107 CP6750-108 CP6750-109 CP6750-111 1 CP6750-112 2 CP6750-110 1
CP6750-6/7/8/9S4L CP4970-125 CP6750-106 CP6750-107 CP6750-108 CP6750-113 CP6750-111 1 CP6750-112 2 CP6750-110 1
CP6751-10/11S0L CP3720-182 CP4751-129 CP5751-109 cp7751-7 CP6751-111 2 CP6751-110 2
CP6751-30/31S0L CP3720-182 CP4751-126 CP4751-104 CP7751-6 CP6751-111 2 CP6751-110 2
CP6751-8/9S0L CP3720-182 CP4751-129 CP4751-104 CP7751-6 CP6751-111 2 CP6751-110 2
CP6760-2/3/4/5S4L CP4970-125 CP4907-106 CP6760-118 CP4144-101 CP6561-106 4
CP6761-10/11S0L CP3720-182 CP4761-111 CP5751-109 cp7751-7 CP6751-111 2 CP6751-110 2
CP6761-8/9S0L CP3720-182 CP4761-111 CP4751-104 CP7751-6 CP6751-111 2 CP6751-110 2
CP6789-2S0 CP3720-173 CP3177-102 CP5310-21 CP6789-104 4
CP6789-3S4 CP3720-173 CP3215-113 CP5100-116 CP5000-54 CP5100-210 2 CP5100-211 2
CP7003-2S0 CP4469-101 CP7003-105
CP7030-2/3S0 CP3720-173 CP7030-108 CP7030-107 CP7030-6 CP7030-106 4
CP7030-4/5S0 CP3720-173 CP7030-108 CP7030-107 CP7030-7 CP7030-106 4
CP7040-16/17/18/19S0 CP4970-125 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 4
CP7040-2/3/4/5S0 CP4970-125 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 4
CP7040-2/3/4/5S0R2 CP4970-125 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 4
CP7041-12/13S0 CP4970-125 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 4
CP7041-12/13S0R2 CP4970-125 CP7040-118(6026) CP6609-106(6026) CP6200-104 CP7040-10 CP7040-110 4
CP7060-2/3S0RD CP4970-125 CP4910-141 CP4910-140 CP3344-192 CP7060-10 CP7040-110 4
CP7060-2/3S4 CP4970-125 CP4910-141 CP4910-140 CP3344-192 CP7060-10 CP7040-110 4
CP7060-2/3S4RD CP4970-125 CP4910-141 CP4910-140 CP3344-192 CP7060-10 CP7040-110 4
CP7206-4/5S4 CP4970-125 CP4090-112 CP5205-101 CP5138-106 CP7206-101 CP6200-103 4
CP7300-2/3/4/5S0L CP4970-125 CP7300-101
CP7516-2/3S0 CP4970-125 CP7516-106 CP7516-107 CP7516-10 CP7040-110 2
CP7517-3S0 CP4970-125 CP7516-106 CP7516-107 CP7516-10 CP7040-110 2
CP7521-2/3S0 CP4970-125 CP7516-107 CP7516-10 CP7040-110 2
CP7600-14/15S4 CP4970-125 CP2409-124 CP7610-11 CP7605-117 4
CP7600-2/3/4/5S0 CP4970-125 CP6200-104 CP7601-11 CP7605-117 4
CP7600-4/5S0R2 CP4970-125 CP6200-104 CP7601-11 CP7605-117 4
CP7600-6/7/8/9S0 CP4970-125 CP6200-104 CP7601-11 CP7605-117 4
CP7601-26/27S0B3 CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7602-2/3S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 4
CP7602-6/7S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 4
CP7605-6/7S0 CP4970-125 CP7605-109 CP7605-10 CP7605-116 4
CP7606-12/13/14/15S0 CP4970-125 CP7605-109 CP7606-10 CP7605-116 4
CP7606-18/19S0 CP4970-125 CP7605-109 CP7606-16 CP7605-116 4
CP7607-12/13S0 CP4970-125 CP7040-118(6026) CP7610-11 CP7605-117 4
CP7607-22/23/24/25S0 CP4970-125 CP7040-118(6026) CP7607-11 CP7605-117 4
CP7607-22/23/24/25S0S2 CP4970-125 CP7040-118(6026) CP7607-11 CP7605-117 4
CP7607-24/25S0R2 CP4970-125 CP7040-118(6026) CP7607-11 CP7605-117 4
CP7607-2/3/4/5S0 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7607-2/3/4/5S0R2 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7607-2/3S0S2 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7609-2/3/4/5S0 CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7609-2/3/4/5S0R2 CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7609-2/3/4/5S0RD CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7610-2/3S0 CP4970-125 CP7040-118(6026) CP6606-109(6026) CP7610-11 CP7605-117 4
CP7611-4/5S0CL CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7611-4/5/6/7S0R2 CP4970-125 CP6609-106(6026) CP7601-11 CP7605-117 4
CP7613-2/3/4/5S0 CP4970-125 CP7613-106 CP7606-10 CP7605-116 4
CP7613-6/7/8/9S0 CP4970-125 CP7613-106 CP7613-10 CP7605-116 4
CP7614-4/5S0 CP4970-125 CP7613-106 CP7614-6 CP7605-117 4
CP7615-2/3/4/5S0 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7615-2/3/4/5S0R2 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7618-4/5S0 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7618-4/5S0R2 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7618-4/5S0VG CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7619-2/3S0R2 CP4970-125 CP6606-109(6026) CP7601-11 CP7605-117 4
CP7621-2/3S0 CP4970-125 CP6609-106(6026) CP7610-11 CP7605-117 4
CP7621-2/3S0R2 CP4970-125 CP6609-106(6026) CP7610-11 CP7605-117 4
CP7622-4/5S0 CP4970-125 CP6609-106(6026) CP7622-10 CP7605-117 4
CP7624-2/3S0 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP7610-11 CP7605-117 4
CP7624-6/7S0R2 CP4970-125 CP6609-106(6026) CP6609-107(6026) CP7601-11 CP7605-117 4
CP7625-2/3S0 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7625-2/3S0R2 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7626-2/3S0R2 CP4970-125 CP7626-107 CP7626-10 CP7605-117 4
CP7627-2/3S0R2 CP4970-125 CP6609-107(6026) CP7627-10 CP7605-117 4
CP7628-2/3S0 CP4970-125 CP6609-107(6026) CP6200-104 CP7627-10 CP7605-117 4
CP7631-2/3S0R2 CP4970-125 CP7626-107 CP7613-106 CP7626-10 CP7605-117 4
CP7633-4/5S0 CP4970-125 CP7040-118(6026) CP7601-11 CP7605-117 4
CP7751-14/15S0L CP3720-182 CP5751-145 CP5751-147 CP4751-104 CP7751-6 CP6751-111 2 CP6751-110 2
CP7751-30/31S0L CP3720-182 CP5751-131 CP5751-130 CP4751-104 CP7751-6 CP6751-111 2 CP6751-110 2
CP7853-2/3E0 CP4469-101 CP4488-107 CP4488-106
CP8315-2/3/4/5S0BK CP4970-125 CP7040-118ST CP6609-106ST CP6200-104ST CP8310-116 CP8310-11 CP8310-115 2 CP8310-114 2
CP8316-2/3/4/5S0R2 CP4970-125 CP6200-104 CP6200-105 CP6609-107 CP8310-110 CP8310-10 CP8310-115 2 CP8310-114 2
CP8317-2/3/4/5S0R2 CP4970-125 CP6609-106 CP6200-104 CP6609-107 CP8310-110 CP8310-10 CP8310-115 2 CP8310-114 2

IMPORTANT NOTE
Whilst every care has been taken to ensure the information contained in the tables on pages ?? to ?? in this publication is correct at
the time of printing, the company however cannot accept any responsiibility for any errors which may occur

www.apracing.com +44 (0)24 7663 9595

 2 Piston Brake Calipers 13

CP2485. CP2505.
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Size Ø44.5mm Piston Size Ø41.3mm
Disc Dia. Disc Dia. Ø254.0mm
CP2485-2/-3 Ø190.0mm Disc Thickness 7.1mm
CP2485-8/-9 Ø254.0mm Disc Pathway
128.0mm
Disc Thickness 9.7mm Radius
GENERAL INFORMATION Weight No GENERAL INFORMATION Weight No
2.7Kg 2.0Kg
Pads Pads
APPLICATIONS APPLICATIONS
Hydraulic - Formula Ford. Hydraulic
- CP2485-2 / -3 Mini Cooper. 3/8”x24UNF 3/8”x24UNF
Thread Thread
- CP2485-8 / -9 Formula Ford FEATURES
Mounting Type Lug - Lug mount. Mounting Type Lug
(Interchangeable with Mtg centres 89.0mm
Mtg centres 89.0mm - Two piece cast iron body
CP2577-14E0).
Mtg offset 20.6mm with a Bright passivated zinc Mtg offset 19.1mm
FEATURES
Mtg hole Ø 9.6mm surface treatment. Mtg hole Ø 9.8mm
- Lug mount.
‘PL’ Dimension 49.9mm - To suit Ø254.0mm x 7.1mm ‘PL’ Dimension 43.7mm
- Two piece cast iron body,
with a Bright passivated zinc Seal Repair Kit CP4508-L solid disc. Seal Repair Kit CP4508-K
surface treatment. Bleed Screw - Non handed. Bleed Screw
17Nm 17Nm
Tightening - Steel pistons. Tightening
- To suit Ø190.0/Ø254.0.0mm (12.5lbs/ft) (12.5lbs/ft)
Torque - High temperature seals. Torque
x 9.7mm solid disc.
- Steel pistons. SPARE PARTS - Piston dirt seals fitted. SPARE PARTS
- Piston dirt seals fitted. Pistons CP2195-157 - Split pin pad retainer. Pistons CP2195-14
- High temperature seals. Pad Retainer Split Pin - Interchangeable with Pad Retainer Split Pin
- Split pin pad retainer. Retainer P/No. CP2696-160 CP3696-6E0 Retainer P/No. CP2696-160
PART NUMBERS PART NUMBER Bleed Screw CP3720-182
Bleed Screw CP3720-182
- CP2485-2S0L Right Hand. - CP2505-3S0L
- CP2485-3S0L Left Hand. INSTALLATION
- CP2485-8S0L Right Hand. Install with bleed screws at
- CP2485-9S0L Left Hand. the top (swap with blanking
INSTALLATION plug as required) to enable a
Install with bleed screws at good bleed.
the top (swap with blanking
plug as required) to enable a
good bleed.

70.15 (2.76”) 59.3 (2.34”)

PAD INFORMATION PAD INFORMATION

- Pad Family = CP2399D43 - Pad Family = CP2195D38
51.1 (2.02”)
58.1 (2.28”)

- Pad Area = 27.4cm² - Pad Area = 22.4cm²

- Pad Depth = 42.9mm - Pad Depth = 38.4mm
- Pad Thickness = 14.4mm - Pad Thickness = 10.5mm

INSTALLATION DRAWING 2.66”

INSTALLATION DRAWING
6.08” / 6.00” 1.645” MAX
0.705” / 0.695” 60° 0.53” / 0.52” 1.31” NOM
1.70”
0.705” / 0.695” 0.575” / 0.565”
0.19”R
1.53”
1.52”

1.00”
0.99”

0.88”
2.12”

30°
0.34”

1.06”
1.05”

0.50”
6”
2.4

AX
”M
.68 THIS LIMIT ON DISC TO
2 HOLES 1.41” R4 ” MAX 0.68”
4.18” T.P.

2.82” 8 BE MAINTAINED STUB &

R4.0
Ø 0.380” 1.75” 0.645” / 0.599” ±0.003” BEARING TO BE
0.376” 3.505” R0.44” TOLERANCED SUCH
3.500” 0.81” NOM
3.88” 3.875” THAT THIS LIMIT IS NOT
R 3.87” DISC TO MOUNTING ±0.02” EXCEEDED.
3.870” LUG TOLERANCE
PIN CENTRES
3.14” 1.37” MAX
0.22” MAX

3.04” MAX 1.33” MAX

1.75” 0.51” MAX
45° 0.31” MAX
Ø1.00” 0.19” MAX
60°
0.04” MAX
3/8”UNF HOSE INLET
0.25”R
51.06

35°
0.06”R
‘H’ MAX

‘A’ MAX
0.88”
0.82”

‘D’ MAX
‘C’ MAX
‘B’ MAX
‘I’ MAX DIA

‘E’ MAX
0.38”
0.37”

0.19”R
DISC

‘G’ MIN

‘F’ MIN

Dimensions
Part No.
A B C D E F G H I
CP2485-2/3 4.68” 4.08” 3.95” 3.89” 3.84” 1.75” 2.18” 5.03” 7.50”
CP2485-8/9 5.96” 5.33” 5.20” 5.14” 5.10” 3.00” 4.18” 6.28” 10.00”

www.apracing.com +44 (0)24 7663 9595

14 Brake Calipers 2 Piston
CP2576, CP2577, CP3176,
CP3676, CP3677, CP4586 & CP4596.
CP3177 & CP3178.
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Size Piston Size
CP2576 Ø41.3mm CP3676 Ø41.3mm
CP2577 Ø44.5mm CP3677 Ø44.5mm
CP3176 Ø38.1mm CP4586 Ø36.0mm
CP3177 Ø36.0mm CP4596 Ø31.8mm
CP3178 Ø31.8mm Disc Diameter Ø267mm
GENERAL INFORMATION Disc Diameter Ø267mm GENERAL INFORMATION Disc Thickness 9.7mm
APPLICATIONS. Disc Thickness 9.7mm Weight No Pads 1.1Kg
APPLICATIONS.
- CP2577-14E0 Formula Ford Weight No Pads 1.1Kg Hydraulic Thread 3/8”x24UNF
- Lightweight Single Seater
Front & Rear.(Interchangeable Hydraulic Thread 3/8”x24UNF Mounting Type Radial
Mounting Type Lug
Front. Mtg centres 95.0mm
with CP2485-8/9S0) - Rally / Circuit Rear.
- Rally / Circuit Rear. Mtg centres 89.0mm Mtg offset 30.5mm
Mtg offset 24.6mm FEATURES. Mtg hole Ø 10.1mm
FEATURES. - Radial mount.
CP2577-14 20.6mm ‘PL’ Dimension 47.33mm
- Lug mount. - One piece aluminium alloy
Mtg hole Ø 9.6mm Seal Repair Kit
- One piece aluminium alloy ‘PL’ Dimension 49.9mm body with hard anodised CP3676 CP4518-K
body with hard anodised CP2577-14 48.5mm surface treatment. CP3677 CP4518-L
surface treatment. Seal Repair Kit - Non handed. CP4586 CP4518-H
- Non handed. CP2576 CP4518-K - To suit Ø267.0mm x 9.7mm CP4596 CP4518-E
- To suit Ø267.0mm x 9.7mm CP2577 CP4518-L solid disc. Bleed Screw
17Nm
solid disc. CP3176 CP4518-J - Aluminium pistons. Tightening
(12.5lbs/ft)
- Aluminium pistons. CP3177 CP4518-H Torque
- High temperature seals.
- Quick release ‘R’ Clip pad CP3178 CP4518-E
- Quick release ‘R’ Clip pad SPARE PARTS
retainer. Bleed Screw Pistons
Tightening
17Nm retainer.
PART NUMBERS. (12.5lbs/ft) CP3676 CP2576-105
Torque PART NUMBERS.
- CP2576-3E0 CP3677 CP2577-102
SPARE PARTS - CP3676-4E0 / Ø41.3mm Bore CP4586 CP3177-102
- CP2577-3E0 - CP3677-4E0 / Ø44.5mm Bore
Pistons CP4596 CP3178-102
- CP2577-14E0 - CP4586-4E0 / 36.0mm Bore
CP2576 CP2576-105 Pad Retainer R Clip
- CP3176-2E0 - CP4596-4E0 / 31.8mm Bore
CP2577 CP2577-102 Retainer P/No. CP2213-17
- CP3177-2E0 INSTALLATION.
CP3176 CP3176-102 Bleed Screw CP3720-182
- CP3178-2E0 CP3177 CP3177-102 Install with bleed screws at
INSTALLATION. CP3178 CP3178-102 the top (swap with blanking
Install with bleed screws at Pad Retainer R Clip plug as required) to enable a
the top (swap with blanking Retainer P/No. CP2213-17 good bleed.
plug as required) to enable a Bleed Screw CP3720-182
good bleed.

70.15 (2.76”) 70.15 (2.76”)

PAD INFORMATION PAD INFORMATION

- Pad Family = CP2399D43 - Pad Family = CP2399D43
58.1 (2.28”)

58.1 (2.28”)
- Pad Area = 27.4cm² - Pad Area = 27.4cm²
- Pad Depth = 42.9mm - Pad Depth = 42.9mm
- Pad Thickness = 14.4mm - Pad Thickness = 14.4mm

INSTALLATION DRAWING TOP OF

INSTALLATION DRAWING 178.5 MAX
89.00 89.00 60.7 MAX 51.5 MAX
PAD TO BE 59.0 NOM 59.0 NOM
OF PAD
23.37 TO TOP

57.1 MAX
MAT’L

59.00 59.00 0.5 NOM

ABOVE DISC
O/D
NOM

DIMN ‘PL’
17.0
DIMN ‘PL’

47.33
51.00

23.96

20.19 MIN 20.19 MIN 25.50

111.0 NOM

DIMENSION ‘U’
R1

OFFSET DIS R1
3 5.

DISC WIDTH 9.7 C 55

0

DIS .5
111.00

O
M

C Ø9.6 MA
DIMN ‘U’

UT
A

PA SID X TOP OF DISC

X

TH MTG HOLE
WA E TO BE 0.5
YR DIA
AD M BELOW TOP OF
IUS ET PAD MAT’L
13 ER
5.0 21.00 MAX 34.00 MAX DISC & WHEELLC
61.6 MAX 51.5 MAX
56.3 MAX 31.4 MAX
50°
21.0 MAX
3°
RADIUS R6 MAX
RADIUS R5 MAX
RADIUS R4 MAX

RADIUS R3 MAX
EFFECTIVE RADIUS

RADIUS R1 MIN

9.7
RADIUS 150.5

RADIUS R2 MIN
RADIUS 144.5

DISC WIDTH
RADIUS 134.4
EFFECTIVE RADIUS 104.8

RADIUS 75.4

MOUNTING
RADIUS 74.1

40.3 MAX DISC & WHEELLC 95.0 MOUNTING CENTRES HOLE

89.0 MTG HOLE CTRS

RADIAL PROFILE
Dim’n R1 R2 R3 R4 R5 R6 EFF RAD
DISC C
L

ON Ø254.0 X 9.7
DISC
Ø267 87.0 81.5 140.5 149.5 150.5 155.5 111.0
DISC & WHEELLC Ø254 81.0 75.3 134.3 143.8 144.5 150.2 104.8

www.apracing.com +44 (0)24 7663 9595

 2 Piston Brake Calipers 15

CP3696. CP6120 & CP6121.

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Size Ø41.3mm Piston Size
Disc Diameter Ø320mm CP6120 Ø44.5mm
Disc Thickness 7.1mm CP6121 Ø38.1mm
Weight No Pads 800g Upto
Disc Diameter
Hydraulic Thread 3/8”x24UNF Ø282mm
Mounting Type Lug Disc Thickness 12.7mm
GENERAL INFORMATION Mtg centres 89.0mm GENERAL INFORMATION Weight No Pads 1.5Kg
APPLICATIONS Mtg offset 19.1mm APPLICATIONS Hydraulic Thread M10x1.0
- Formula Ford. Mtg hole Ø 10.15mm - Formula Ford. Mounting Type Radial
- Rear of lightweight FWD ‘PL’ Dimension 45.5mm FEATURES Mtg centres 130.0mm
Cars. Seal Repair Kit CP4518-K - Radial mount Mtg offset 20.9mm
Bleed Screw Mtg hole Ø 10.1mm
FEATURES 17Nm - To suit up to Ø282.0mm x
Tightening ‘PL’ Dimension 50.51mm
- Two piece aluminium alloy (12.5lbs/ft) 12.7mm solid disc.
Torque Seal Repair Kit
body with hard anodised - Two piece aluminium alloy
SPARE PARTS CP6120 CP4518-L
surface treatment. body. Machined from high CP6121 CP4518-J
Pistons CP3696-105
- Lug mount. Pad Retainer R Clip quality die castings. Bleed Screw
- To suit Ø320.0mm x 7.1mm - Aluminium pistons. 17Nm
Retainer P/No. CP3696-106 Tightening
(12.5lbs/ft)
solid disc. Bleed Screw CP3720-182 - High temperature seals. Torque
- Non handed. - Hard anodised surface SPARE PARTS
- Aluminium alloy pistons. treatment. Pistons
- High temperature seals. PART NUMBERS CP6120 CP5235-108
- R’ Clip pad retainer. - Caliper with Ø44.5mm CP6121 CP6121-104
- Interchangeable with Pistons: Pad Retainer Pin
CP2505-3S0. - CP6120-2S0 Right Hand. Retainer P/No. CP6120-103
PART NUMBER - CP6120-3S0 Left Hand. Bleed Screw CP3880-1
- CP3696-6E0 - Caliper with Ø38.1mm Fluid Pipe CP6120-6
INSTALLATION Pistons:
Install with bleed screws at - CP6121-2S0 Right Hand
the top (swap with blanking - CP6121-3S0 Left Hand
plug as required) to enable a INSTALLATION
good bleed. Install with bleed screws at
the top (swap with blanking
plug as required) to enable a
good bleed.

77.3 (3.04”)
59.3 (2.34”)

PAD INFORMATION PAD INFORMATION

68.15 (2.68”)
- Pad Family = CP2195D38 - Pad Family = CP5119D50
51.1 (2.02”)

- Pad Area = 22.4cm² - Pad Area = 33.7cm²

- Pad Depth = 38.4mm - Pad Depth = 50.0mm
- Pad Thickness = 10.5mm - Pad Thickness = 14.3mm

INSTALLATION DRAWING INSTALLATION DRAWING 97.49 MAX 92.16 MAX

20.90
72.0 72.0
52.4 52.4
DIM'N 'PL'
50.51
41.00
‘PL DIMN’
45.5

19.1 7.1
00
OFFSET DISC WIDTH 2. 0
3.5
90.50 DIM'N U

28 14
Ø
ER IUS
DI

52.8 MAX 42.7 MAX ET AD

SC

PA R
AM Y
43.1 MAX 36.0 MAX TH DI HWA
O

W 10.15
UT

20.4 20.4 AY 59.94 MAX 59.94 MAX SC PAT

MTG HOLE DIA DI
SID

MAX MAX RA D E ISC

I D
E

DI 33.00 MAX 33.00 MAX TS

‘U’ DIMN
DI

41° 41° US TOP OF PAD MATERIAL U

AM

13 O
5. TO BE 0.5 NOM 56.84
ET

1 ABOVE DISC O/D MAX DISC & WHEELLC

ER

40.00°
26

10.15
6.

Ø
7

10.05
DISC & WHEEL C MOUNTING HOLES 130.00 MTG HOLE CENTRES
RAD 155.2 MAX

19.50
RAD 153.3 MAX

RAD 146.7 MAX

OFFSET

C/BORE
112.0 EFFECTIVE RADIUS

RAD 139.1 MAX

20.90
R153.00 MAX

106.20 EFFECTIVE RADIUS

135.24

R127.00 MAX
RAD 84.9 MAX
RAD 82.0 MAX

R83.00 MIN
R77.14 MIN

20.90
74.14 MIN
DISC C
L

40.00 MAX OFFSET

RADIAL PROFILE
89.0 MTG HOLE CENTRES DRAWN TO SCALE
DISC & WHEEL C FOR A Ø261.00
DISC & WHEEL C
L L

www.apracing.com +44 (0)24 7663 9595

16 Brake Calipers General Use.

CP3228 - 4 Piston. CP3307 - 4 Piston.

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Size Ø38.1mm Ø38.1mm
Piston Sizes
Disc Diameter Ø280.0mm Ø41.3mm
Disc Thickness 23.0mm Disc Diameter
Weight No Pads 1.7Kg -58/-59/-60/
Ø330.0mm
Hydraulic Thread 3/8”x24UNF -61S4
Mounting Type Blank Lug -74/-75/-76/
Ø304.0mm
GENERAL INFORMATION ‘PL’ Dimension 81.0mm Max GENERAL INFORMATION -77S4
APPLICATIONS Seal Repair Kit CP4518-JJ APPLICATIONS. Disc Thickness 28.0mm
- Group A Race & Rally for Bleed Screw - Race, Rally or H/Perf Saloons. Weight No Pads 2.8Kg
17Nm
Tightening Hydraulic Thread 3/8”x24UNF
ventilated discs. (12.5lbs/ft) FEATURES.
Torque Mounting Type Blank Lug
FEATURES - Two piece aluminium alloy
SPARE PARTS Mounting Hole 12.20mm
- Two piece aluminium alloy body, machined from high ‘PL’ Dimension
Pistons CP3228-103
body, machined from high quality die casting with hard -58/-59/-60/ 101.0mm
Pad Retainer Clip
quality die casting with hard Retainer P/No. CP3228-101 anodised surface treatment. -61S4 Max
anodised surface treatment. CP6518- - Lug mount (Blank). -74/-75/-76/
AKB Spring Kit 86.6mm Max
- Lug mount (Blank) 4LBLL - Suit Ø330.0/304.0 x 28.0mm -77S4
- Suits Ø280.0 x 23.0mm disc. Bleed Screw CP3720-182 disc. Disc Pathway Radius
- Aluminium pistons standard. Fluid Pipe CP3228-4 - Aluminium pistons. -58/-59/-60/
167.6mm
- High temperature seals. - High temperature seals. -61S4
- Stainless steel bridge pipe, - Stainless steel bridge pipe, -74/-75/-76/
154.5mm
-77S4
pad abutments & wear plates pad abutments & wear plates
Seal Repair Kit CP4518-JK
fitted. fitted.
Bleed Screw
- 4lb anti-knockback springs PART NUMBERS. 17Nm
Tightening
fitted. - To suit disc Ø330.0 x 28.0mm (12.5lbs/ft)
Torque
PART NUMBERS CP3307-58S4 RHT / -59S4 SPARE PARTS
- CP3228-26S4 RHT. LHT / -60S4 RHL / -61S4 LHL. Pistons
- CP3228-27S4 LHT. - To suit disc Ø304.0 x 28.0mm Ø38.1mm CP2260-66
CALIPER HANDING CP3307-74S4 RHT / -75S4 Ø41.3mm CP2270-92
It is important to select the LHT / -76S4 RHL / -77S4 LHL. Pad Retainer Bolt
correct ‘hand’ of caliper. See CALIPER HANDING. Retainer P/No. CP3307-246
note on page 4 for guidance. It is important to select the Ret / Bolt No. CP3894-139
correct ‘hand’ of caliper. See Wear Plates CP3307-222
note on page 4 for guidance. CP6518-
AKB Spring Kit
N.B. For advice on machining 4LBLL
Bleed Screw CP3720-182
blank lug calipers contact
Fluid Pipe CP3216-29
AP Racing Technical Section.

113.5 (4.47”)
PAD INFORMATION PAD INFORMATION 132.27 (5.20”)

- Pad Family = CP2340D51 - Pad Family = CP3215D50

(2.05”)
52.1

- Pad Area = 43.4cm² - Pad Area = 57.4cm² (2.19”)

55.75

- Pad Depth = 50.8mm - Pad Depth = 50.3mm

- Pad Thickness = 15.9mm - Pad Thickness = 16.8mm

INSTALLATION DRAWING INSTALLATION DRAWING

121.00 MAX 112.25 MAX 127.5 MIN. TO REMOVEPADS
TOP OF PAD MATERIAL
29.72
81.00 MAX
‘PL’ DIMN
64.80

90.0

CAST
LUG CAST 32.25
LUG
PROFILE DISC WIDTH
29.00 PROFILE
DIMN ‘U’

25.4
DIA D.
29.53 TER ‘N’ O.
OU AD SC DIU
S
30° YR DI RA
WA
DIMN ‘U’

23.50 C AY
DIS P ATH 68.3 MAX 68.3 MAX HW
6.60 DIS
C PAT
56.8 MAX 48.7 MAX C IU S ‘R1’
DIS RA D
30.75 72.0 23.0
DISC & WHEELLC ANGLE ‘F’
DISC & WHEEL CL
64.65 MAX 64.65 MAX
36.35 36.35
MAX MAX
RAD R1 MAX
RAD R2 MAX
EFFECTIVE RADIUS

30.90 30.90
MIN
DISC WIDTH

MIN 20°
RADIUS R4 MIN
23.00MM

60.8 MAX
RAD R5 MIN
156.25 MAX
EFFECTIVE RADIUS 115.9

DISC CL
139.9 MAX
139.9 MAX
95.90 MIN

59.15 MAX
87.95 MIN

WHEEL CL
78.85 MIN

EFF
Disc Ø W1 W2 W3 W4 W5 °F R1 R2 R3 R4
RAD
DISC & WHEELLC
330.0 35.5 184.3 163.6 113.3 110.1 138.3
68.3 68.3 56.8 48.7 60.8
304.0 31.8 169.8 151.4 101.1 97.6 126.06

www.apracing.com +44 (0)24 7663 9595

 GT Brake Calipers 17

CP3788 - 4 Piston CP3799 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Sizes Ø38.1mm Piston Sizes Ø28.6mm
Ø44.5mm Ø34.9mm
Disc Diameter Disc Diameter
Max Ø356.0mm Max Ø355.0mm
Min Ø295.0mm Min Ø330.0mm
Disc Thickness Disc Thickness
GENERAL INFORMATION Max 32.0mm
GENERAL INFORMATION Max 32.0mm
APPLICATIONS Min 28.0mm APPLICATIONS Min 28.0mm
- General GT. Weight No Pads 2.3Kg - GT3 Rear. Weight No Pads 2.53Kg
FEATURES Hydraulic Thread M10x1.0 FEATURES Hydraulic Thread M10x1.0
- Two piece cast aluminium Mounting Type Radial - Two piece cast aluminium Mounting Type Radial
alloy body with hard anodised Mtg centres 152.0mm alloy body with hard anodised Mtg centres 152.0mm
surface treatment. Mtg offset surface treatment. Mtg offset 44.10mm
- Radial mount. -2 to 5 & -16 to - Radial mount. Mtg hole Ø 12.15mm
44.1mm
- To suit Ø356.0/330.0/315.0/ -19S7 - To suit Ø355.0 or 330.0mm x ‘PL’ Dimension 57.74mm
295.0mm x 32.0/28.0mm disc. -6/-7/-8/-9S4 42.1mm 32.0 / 28.0mm disc. Seal Repair Kit CP4518-DG
- Differential bores, to control Mtg hole Ø 12.15mm - Differential bores, to control Bleed Screw
17Nm
‘PL’ Dimension 57.5mm Tightening
pad taper. pad taper. (12.5lbs/ft)
Seal Repair Kit CP4518-JL Torque
- Aluminium pistons with high - Aluminium pistons with high
temperature seals.
Bleed Screw 17Nm
temperature seals.
SPARE PARTS
Tightening Torque (12.5lbs/ft) Pistons
- Stainless steel bridge pipe, - Stainless steel bridge pipe,
SPARE PARTS Ø28.6mm CP3799-112
pad abutments & wear plates. Pistons pad abutments & wear plates. Ø34.9mm CP3789-106
- H/Piece pad retainer. Ø38.1mm CP3636-107 - H/Piece pad retainer. Pad Retainer H/Piece
- Rear Caliper available. Ø44.5mm CP3394-110 Retainer P/No. CP3799-106
CP3789 Series. Pad Retainer H/Piece PART NUMBERS Ret / Bolt No. CP3394-112
PART NUMBERS Retainer P/No. - To suit disc Ø330.0 x 32.0mm Wear Plates
- To suit disc Ø356 x 32mm -2/-3/-4/-5S7 CP3799-109 CP3799-2S0 RHT /-3S0 LHT / CP3799-110 x 1 / CP3799-111 x 1
CP3788-16S7 RHT /-17S7 -6/-7/-8/-9S4 CP3788-112 -4S0 RHL /-5S0 LHL. CP3846-101 x 2
LHT / -18S7 RHL /-19S7 LHL. -16/-17/-18/-19S7 CP3795-101 Bleed Screw CP3720-173
- To suit disc Ø330 x 32mm Ret / Bolt No. CALIPER HANDING Fluid Pipe CP3799-6
CP3788-2S7 RHT /-3S7 LHT -2 to 5S7 & It is important to select the
CP3439-111
/-4S7 RHL /-5S7 LHL. -16 to -19S7 correct ‘hand’ of caliper. See
-6/-7/-8/-9S4 CP3344-112
- To suit disc Ø315/295 x note on page 4 for guidance.
Wear Plates
28mm.
CP3799-110 x 1 / CP3799-111 x 1
CP3788-6S4 RHT /-7S4 LHT / CP3846-101 x 2 131.3 (5.17”)
-8S4 RHL /-9S4 LHL Bleed Screw CP3720-173 PAD INFORMATION
CALIPER HANDING Fluid Pipe - Pad Family = CP2279D50

(2.02”)
It is important to select the

54.1
-2 to 5S7 & - Pad Area = 57.4cm²
CP3799-6
correct ‘hand’ of caliper. See -16 to -19S7 - Pad Depth = 50.3mm
note on page 4 for guidance. -6/-7/-8/-9S4 CP3788-10 - Pad Thickness = 20.5mm
131.3 (5.17”)
PAD INFORMATION
- Pad Family = CP2279D50
INSTALLATION DRAWING
(2.02”)

- Pad Area = 57.4cm²

54.1

131.0 MAX 123.0

- Pad Depth = 50.3mm Ø28.6 (1.12”)

Ø34.9 (1.37”)
TRAILING
LEADING
- Pad Thickness = 20.5mm
‘PL’ DIMN
57.74
45.67

INSTALLATION DRAWING
MATERIAL
TOP OF

130.00 MAX 123.00 ‘E’ DIMN

DISC &
PAD

DISC WIDTH
DIRECTION OF DISC PATHWAY
DISC ROTATION
‘U’ DIMENSION

RADIUS R180.00
BLEEDSCREW MAX
28.27

DIMN ‘PL’

TIGHTENING TORQUE EFFECTIVE

86.00 MAX DISC DIAMETER RADIUS
45.67

17Nm AT AMBIENT.
57.5

77.00 MAX 79.00 MAX

W1 MAX W2 MAX

DISC WIDTH
DIMN ‘U’

‘N’ INLET PORT

DISC IUS
W1 MAX W2 MAX DIS AD M10x1.0 THREAD ‘D’ DIMN 152.00 Ø12.15
CO ROTATION YR
W3 MAX UTS WA MTG
IDE A TH Ø22.00 HOLE
DIA CP
M ETE DIS C/BORE
R
R1 MAX

53.0 MAX 53.0 MAX

R2 MAX

INLET PORT R8.00

R3 MAX

M10X1.0
MYG HOLE CTRS 152.00 12.15 MTG HOLES
R4 MIN
R5 MIN

R6 MIN

Ø22.00 C/BORE
RADIUS R1 MAX
RADIUS R2 MAX
EFFECTIVE RADIUS

R8.0
OFFSET
RADIUS R3 MIN
RADIUS R4 MIN

W4 MAX
DIMN ‘C’
OFFSET
44.10

PAD RETAINER BOLT MAX TORQUE 15Nm (11LbFt)

CHOICE OF BOLTED
WHEEL / DISCLC ‘H’ PIECE OR QUICK
RELEASE CLIP
EFF ‘U’
Disc Ø W1 W2 R1 R2 R3 R4 R5 R6
Disc Ø W1 W2 W3 R1 R2 R3 R4 EFF RAD RAD Dim’n
330 x 32 80.0 78.6 53.0 183.0 170.5 113.5 110.5 141.4 356 x 32 41.0 46.0 196.0 182.0 164.0 146.0 125.5 122.5 153.6 119.76
315 x 28 78.0 76.6 51.0 175.5 163.0 106.5 103.0 134.3 330 x 28 37.0 40.0 187.0 170.0 152.0 134.0 113.5 110.5 141.5 107.26
295 x 28 78.0 76.6 51.0 168.5 153.0 96.5 93.0 134.2

www.apracing.com +44 (0)24 7663 9595

18 Brake Calipers GT

CP5045 - 4 Piston CP6070 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø38.1mm Ø28.6mm
Piston Sizes Piston Sizes
Ø44.5mm Ø36.0mm
Disc Diameter Disc Diameter Ø356.0mm
Max Ø355.0mm Disc Thickness
Min Ø330.0mm Carbon 35.0mm
Disc Thickness 26.0mm GENERAL INFORMATION Iron 32.0.0mm
GENERAL INFORMATION Weight No Pads 3.2Kg APPLICATIONS Weight No Pads 2.2Kg
APPLICATIONS. Hydraulic Thread 3/8”x24UNF - GT Rear, 180mm Centres. Hydraulic Thread M10x1.0
- Grand AM GT Class. Mounting Type Radial FEATURES Mounting Type Radial
FEATURES. Mtg centres 180.0mm - Radial mount. Mtg centres 180.0mm
- Radial mount, Mtg offset 42.0mm - To suit for Ø356.0 x 35.0mm Mtg offset 42.0mm
- Two piece cast aluminium Mtg hole Ø 12.1mm Carbon disc & Ø356.0 x Mtg hole Ø 12.15mm
alloy body with Hard anodised ‘PL’ Dimension 63.5mm ‘PL’ Dimension 63.5mm
32.0mm Iron disc.
surface treatment. Seal Repair Kit CP4518-JL Seal Repair Kit CP4518-DH
- Monobloc aluminium alloy
Bleed Screw Bleed Screw
- To suit Ø355.0 or 330.0mm x 17Nm body, CNC machined billet. 17Nm
Tightening Tightening
26.0mm disc. (12.5lbs/ft) - Differential bores, to control (12.5lbs/ft)
Torque Torque
- Differential bores, to control Typical Mount- pad taper.
M12 = 65Nm SPARE PARTS
pad taper. ing Bolt Torque - Titanium pistons. Pistons
- Stainless steel pistons with SPARE PARTS - High temperature seals. Ø28.6mm CP6070-110
high temperature seals. Pistons - Optional extras, Ø36.0mm CP6070-111
- Stainless steel bridge pipe, Ø38.1mm CP5045-110 - Dry-break fittings & body Wear Plates. x 4 CP6070-107
pad abutments & wear plates Ø44.5mm CP5045-111 Thermo-Sensor. Beam Wear
- Ceramic piston insulation CP6070-106
fitted. CP6518- Plate. x 1
AKB Spring Kit
- Quick release pad retainer 7LBLL caps. Bleed Screw CP3880-1
clip. Pad Retainer Clip - Hard anodised surface Fluid Pipes
- 7lb Anti-knockback springs Retainer Part No CP3714-113 treatment. CP6070-2 / -3 CP6070-6
fitted as standard. Hinge Retainer CP3714-112 - Stainless steel bridge pipe, CP6070-4 / -5 CP6070-7
Wear Plates x 4 CP3714-153 pad abutments & wear plates AVAILABLE OPTIONS
PART NUMBERS.
Bleed Screw CP3880-2 fitted. Thermo Sensor
- CP5045-8S7L RHT / -9S7L
Fluid Pipes CP5045-7 PART NUMBERS Right Hand CP6282-2
LHT / -10S7L RHL / -11S7L
- CP6070-2S7MP RHT / Left Hand CP6282-3
LHL.
-3S7MP LHT /-4S7MP RHL Dry-Break
CALIPER HANDING. Fittings
See Page 5
It is important to select the /-5S7MP LHL.
CALIPER HANDING Piston Caps
correct ‘hand’ of caliper. See Ø28.6mm CP6060-128
note on page 4 for guidance. It is important to select the
Ø36.0mm CP6292-155
correct ‘hand’ of caliper. See
note on page 4 for guidance.
131.6 (5.18”)
131.7 (5.18”)
PAD INFORMATION
PAD INFORMATION - Iron Family = CP6070D49

(2.32”)
Carbon
59.00
- Pad Family = CP5045D61 - Carbon Family = CP6070
75.0 (2.95”)

- Pad Area = 74.0cm² - Pad Area = 83.0cm²

- Pad Depth = 60.5mm - Iron = 61.6cm² 131.6 (5.18”)

- Pad Thickness = 24.0mm - Carbon = 69.1cm²

(2.32”)
59.00

- Pad Depth = 49.0mm Iron

- Pad Thickness = 25.0mm

INSTALLATION DRAWING INSTALLATION DRAWING

W1 MAX W2 MAX 136.0 MAX 136.80 MAX 129.00 MAX 125.50 MAX
W3 MAX W4 MAX Ø44.45 (1.75”) BORE - TRAILING
Ø38.1 (1.5”) BORE Ø22.00
LEADING
REMOVE OADS
193.0 MAX TO

86.75 MAX 95.00 MAX

35.74
‘PL’ DIM’N

29.29

44.20 MAX 44.20 MAX

63.5

‘PL’ DIMN
40.0

22.10 22.10
63.50

39.20
34.20
(2 PLACES)
R5 MAX

0.60X45°
R4 MAX

2 OFF HOLES
R6 MAX

W5 MAX W5 MAX DIRECTION OF

FOR ‘LOCK
1.25x45°

DISC ROTATION
R1
R3 MIN

Ø12.15 DIRECTION OF
‘U’ DIM’N

W6 MAX WIRING’ PAD R1 12.19

51

Ø12.09
114.00 (’U’ DIMN)

12.05 IUS 80 DISC ROTATION

.9

MIN

RETAINING .00
R2 MIN

AD
0
R1 MIN

R
EF

CLIP PA
AY
R12

TH
FE

IN PLACE. HW WA Ø22.00
C

AT
TIV

.0 P
6.5

YR
201.00 MAX

RADIAL PROFILE
180 AD
E
196.10 MAX

0M

R
RA

(SCALED FOR IU S
174.50 MAX

DISC & WHEEL CENTRE LINE

D
171.80 MAX

A Ø330 DISC)
IN
IU
S

180.0 MOUNTING HOLE CTR’S 54.00 MAX 54.00 MAX

13.0 MAX
THREAD HYDRAULIC INLET
124.80 MIN

Ø355.0 DISC & WHEEL C

L
127.60 MIN

TYPICAL MTG 3/8X24”UNF Ø

25
TIGHTENING TORQUE .0
FOR GUIDANCE ONLY: 180.0 MOUNTING HOLE CTRS
M12 - 65Nm & M10 - 54Nm
RADIAL PROFILE 10.75 MAX M10x1.0 THD
(SCALED FOR A FULL THD INLET PORT
Ø355.0 DISC)
OFFSET
42.0

OFFSET
42.00

AP RACING
RECOMMEND TYPICAL MTG TIGHTENING
THAT PAD TORQUE FOR GUIDANCE
RETAINING CLIP ONLY:M12 - 65Nm &
IS ‘LOCK WIRED’ BLEEDSCREW M10 - 54Nm
IN PLACE WHEN MAX
RUNNING VEHICLE TIGHTENING DRY-BREAK FITTING OPTION
TORQUE 17Nm APPLY LOCTITE 270 TO THREAD UPON
THERMO SENSOR
ASSEMBLY
(PT100 TYPE)
TIGHTENING TORQUE
CP6282-2 (RH)
EFF ‘U’ CP6300-6 FITTING (CALIPER)
Disc Ø R1 R2 R3 R4 R5 R6 W1 W2 W3 W4 W5 W6 CP6300-7 FITTING (BLEEDING SYSTEM)
CP6282-3 (LH)
RAD DIM’N CP6300-8 SPARE DUST CAP * SEAL
355x26 114.3 117.0 142.0 174.3 198.3 174.0 84.8 88.5 46.6 46.6 53.0 81.1 147.0 114.0
330x26 102.3 104.5 132.0 162.3 189.5 162.0 84.8 88.5 42.1 42.1 53.0 80.9 135.0 101.5

www.apracing.com +44 (0)24 7663 9595

 GT Brake Calipers 19

CP6071 - 4 Piston CP6080 - 6 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø28.6mm Ø27.0mm
Piston Sizes
Ø36.0mm Piston Sizes Ø31.8mm
Disc Diameter Ø356.0mm Ø38.1mm
Disc Thickness Disc Diameter Ø380.0mm
Carbon 35.0mm Disc Thickness
GENERAL INFORMATION Iron 32.0.0mm GENERAL INFORMATION Carbon 37.0mm
APPLICATIONS Weight No Pads 2.2Kg APPLICATIONS Iron 36.0mm
- GT Rear, 130mm Centres. Hydraulic Thread M10x1.0 Weight No Pads 2.6Kg
- LMP1, FIA GT1 Front & Rear.
- Porsche GT Rear. Mounting Type Radial Hydraulic Thread M10x1.0
FEATURES
FEATURES Mtg centres 130.0mm Mounting Type Radial
Mtg offset 62.0mm
- Radial mount. Mtg centres 210.0mm
- Radial mount. - Monobloc aluminium alloy
Mtg hole Ø 12.15mm Mtg offset 42.0mm
- To suit for Ø356.0 x 35.0mm body, CNC machined billet.
‘PL’ Dimension 64.0mm Mtg hole Ø 12.15mm
Carbon disc & Ø356.0 x - Designed to operate on
Seal Repair Kit CP4518-DH ‘PL’ Dimension 63.5mm
32.0mm Iron disc. Carbon or Iron Discs.
Bleed Screw Seal Repair Kit CP4518-CEJ
- Monobloc aluminium alloy Tightening
17Nm
- Quick release hinged pad Bleed screw 17Nm
body, CNC machined billet. (12.5lbs/ft)
Torque retainer mechanism. tightening torque (12.5lbs/ft)
- Differential bores, to control SPARE PARTS - Differential bores, to control SPARE PARTS
pad taper. Pistons Pistons
pad taper.
- Titanium pistons. Ø28.6mm CP6070-110 Ø27.0mm CP6060-122
- Titanium pistons.
- High temperature seals. Ø36.0mm CP6070-111 Ø31.8mm CP6060-120
- High temperature seals.
- Optional extras, Wear Plates. x 4 CP6070-107 Ø38.1mm CP6060-121
- Dry-break fittings, body - Optional extras. - Ceramic
Beam Wear Wear Plates. x 4 CP6070-107
Thermo-Sensor and ceramic CP6070-106 piston insulation caps.
Plate. x 1 Bleed Screw CP3880-1
piston insulation caps. - Hard anodised surface
Bleed Screw CP3880-1 Fluid Pipes
- Hard anodised surface Fluid Pipes treatment.
CP6080-2 / -3 CP6080-6
treatment. CP6071-2 / -3 CP6071-6 - Stainless steel bridge pipe, CP6080-4 / -5 CP6080-7
- Stainless steel bridge pipe, CP6071-4 / -5 CP6071-7 pad abutments & wear plates CP6518-7LB
fitted. AKB Spring Kit
pad abutments & wear plates AVAILABLE OPTIONS SSL
fitted. Thermo Sensor PART NUMBERS AVAILABLE OPTIONS
PART NUMBERS Right Hand CP6282-2 - CP6080-2S7MP RHT / Thermo Sensor
- CP6071-2S7MP RHT / Left Hand CP6282-3 -3S7MP LHT /-4S7MP RHL Right Hand CP6282-2
-3S7MP LHT /-4S7MP RHL Dry-Break /-5S7MP LHL Left Hand CP6282-3
See Page 5
/-5S7MP LHL. Fittings CALIPER HANDING Dry-Break
See Page 5
Piston Caps It is important to select the Fittings
CALIPER HANDING
Ø28.6mm CP6060-128 correct ‘hand’ of caliper. See Piston Caps Kit CP4528-CEJ
It is important to select the
Ø36.0mm CP6292-155 note on page 4 for guidance.
correct ‘hand’ of caliper. See
note on page 4 for guidance. PAD INFORMATION 162.9 (6.41”)

131.6 (5.18”) - Iron Family = CP6210D54

PAD INFORMATION

(3.17”)
80.6
- Iron Family = CP6070D49 - Carbon Family = CP4970
(2.32”)

CP6210
59.00

- Carbon Family = CP6070 Carbon - Pad Area = 83.0cm²

- Pad Area = 83.0cm² - Pad Depth
163.0 (6.41”)
- Iron = 61.6cm² 131.6 (5.18”) Iron = 54.0mm
- Carbon = 69.1cm² Carbon = 53.0mm CP4970
(2.32”)
59.00

- Pad Depth = 49.0mm Iron - Pad Thickness = 30.0mm

- Pad Thickness = 25.0mm
INSTALLATION DRAWING
INSTALLATION DRAWING 129.50 MAX 125.50 MAX
145.00
Ø31.8 BORE
142.00
38.1 BORE
TRAILING
86.80 MAX 90.30 MAX 98.30 MAX 99.30 MAX Ø27.00 BORE Ø22.0
54.10 MAX 62.20 MAX LEADING
(PL DIMENSION)

44.20 MAX44.20 MAX 28.50 MAX

29.30

‘PL’ DIMN

22.10 22.10
63.50

MAX MAX
37.75
46.45
34.70
64.00

1.25X45°

DIRECTION OF Ø12.20
1.25x45°

MIN

R1 RELEASE TRAVEL 12.10

DIRECTION OF
R212.00 MAX

51
(’U’ DIMENSION)

MIN

R1
R207.90 MAX

.9 DISC ROTATION Ø22.00

R163.50 EFFECTIVE RADIUS

80
R189.20 MAX

.0 0
‘U’ DIMN
R185.30 MAX

0P EF
R12

AT FE IUS
R201.00 MAX

R196.10 MAX

C 12.20
HW AD
R143.90 MAX
R135.50 MAX

93.50 MAX
6

TIV Ø
AY YR
.50

12.10
R172.70 MAX

RA E R
R174.50 MAX

113.50

Ø22.00 WA
DIU AD TH
MIN

54.00 MAX 72.50 MAX

S IU PA
2.5
R127.60 MIN

S 9
R124.80 MIN

Ø355.0 DISC & WHEELLC

R1 BLEEDSCREW
RADIAL PROFILE MAX
(SCALED FOR A TIGHTENING
Ø380.0 DISC) 210.00 MOUNTING HOLE CTR’S TORQUE
RADIAL PROFILE M10x1.0 17Nm
(SCALED FOR A HYDRAULIC INLET 10.50 MAX
130.0 MTG HOLE CTR’S TYPICAL MTG TIGHTENING
Ø355.0 DISC)
TYPICAL TIGHTENING 10.00 MAX M10x1.0 THD TORQUE FOR GUIDANCE
OFFSET

(INLET PORT)
62.00

TORQUE FOR GUIDANCE FULL THD ONLY: M12 - 65Nm

ONLY: & M10 - 54Nm
M12 - 65Nm
M10 - 54Nm
OFFSET
42.00

DRY-BREAK FITTING
WHEN RUNNING Cp6210 IRON OPTION APPLY LOCTITE
PADS THE PAD SUPPORTS MUST 270 TO THREAD UPON
THERMO SENSOR ASSEMBLY TIGHTENING
BE TURNED AROUND. THE LETTERS
(PT100 TYPE) TORQUE
DRY-BREAK FITTING OPTION ‘I’ ON THE PADS SUPPORTS MUST
CP6282-2 (RH) CP6300-6 FITTING
APPLY LOCTITE 270 TO THREAD UPON FACE EACH OTHER AS SHOWN.
CP6282-3 (LH) (CALIPER)
ASSEMBLY TIGHTENING TORQUE APR RECOMMEND THE USE OF A
CP6300-6 FITTING (CALIPER) THREADLOCKER (LOCTITE 243 OR CP6300-7 FITTING THERMO
CP6300-7 FITTING (BLEEDING SYSTEM) SIMILAR) ON THE PAD SUPPORT (BLEEDING SYSTEM) SENSOR
CP6300-8 SPARE DUST CAP * SEAL RETAINING SCREWS. CP6300-8 SPARE (PT100 TYPE)
DUST CAP * SEAL CP6282-2 (RH)
CP6282-3 (LH)

www.apracing.com +44 (0)24 7663 9595

20 Brake Calipers GT

CP6088 - 6 Piston CP6096 - 6 Piston

TECHNICAL TECHNICAL
New
SPECIFICATION Product SPECIFICATION
Ø27.0mm Ø27.0mm
New
Product Piston Sizes Ø31.8mm Piston Sizes Ø31.8mm
Ø38.1mm Ø38.1mm
Disc Diameter Ø355.0mm Disc Diameter Ø380.0mm
Disc Thickness Disc Thickness 37.0mm
GENERAL INFORMATION Iron 36.0mm GENERAL INFORMATION Weight No Pads 2.5Kg
APPLICATIONS Carbon 35.0mm APPLICATIONS Hydraulic Thread M10x1.0
- LMP2. Weight No Pads 2.4Kg - FIA GT1. Mounting Type Radial
FEATURES Hydraulic Thread M10x1.0 FEATURES Mtg centres 210.0mm
- Ducted air cooling as devel- Mounting Type Radial - Ducted air cooling as devel- Mtg offset 42.0mm
oped in F1 for Championship Mtg centres 210.0mm oped in F1 for Championship Mtg hole Ø 12.15mm
winning team. Mtg offset 42.0mm ‘PL’ Dimension 63.53mm
winning team.
- Monobloc aluminium alloy Mtg hole Ø 12.15mm Seal Repair Kit CP4518-CEJ
- Monobloc aluminium alloy
body, CNC machined billet. ‘PL’ Dimension 63.5mm Bleed Screw 17Nm
Seal Repair Kit CP4518-CEJ body, CNC machined billet. Tighting torque (12.5lbs/ft)
- Radial mount. - Radial mount.
- Internally ported, no external
Bleed Screw 17Nm SPARE PARTS
Tighting torque (12.5lbs/ft) -To suit Ø Ø380.0 x 37.0mm Pistons
bridge pipe. Carbon discs.
SPARE PARTS Ø27.0mm CP6060-122
-To suit Ø355.0 x 36.0mm Iron, - Differential bores.
Pistons Ø31.8mm CP6060-120
or 35.0mm Carbon thick discs. Ø27.0mm CP6057-110 to control pad taper. Ø38.1mm CP6060-121
- Differential bores. Ø31.8mm CP6055-111 - Titanium pistons. Wear Plates. x 4 CP6060-107
to control pad taper. Ø38.1mm CP6055-112 - High temperature seals. Centre W/Plate CP6086-104
- Titanium pistons. Wear Plates. x 4 CP6055-107 - optional Ceramic piston Bleed Screw CP3880-1
- High temperature seals. Beam W/Plate CP6087-104 insulation caps & dry-break Fluid Pipes
- Ceramic piston insulation Bleed Screw CP3880-1 fittings & body Thermo-Sensor Leading caliper CP6096-6
caps & dry-break fittings & Fluid Pipes CP6086-6 available Trailing caliper CP6096-7
body Thermo-Sensor available CP6518-7LB - Hard anodised surface CP6518-7LB
AKB Spring Kit AKB Spring Kit
as options. SSL SSL
treatment.
- Stainless steel bridge pipe, AVAILABLE OPTIONS - Stainless steel bridge pipe, AVAILABLE OPTIONS
pad abutments & wear plates Thermo Sensor Thermo Sensor
pad abutments & wear plates
fitted. Right Hand CP6282-2 Right Hand CP6282-2
Left Hand CP6282-3
fitted. Left Hand CP6282-3
PART NUMBERS PART NUMBERS
Piston Caps Dry-Break
- CP6088-2S7MP RH. - CP6096-2S7MP RHT / See Page 5
Ø27.0mm CP6292-168 Fittings
- CP6088-3S7MP LH. -3S7MP LHT /-4S7MP RHL
Ø31.8mm CP6060-128
CALIPER HANDING Ø38.1mm CP5842-118 /-5S7MP LHL
It is important to select the Dry-Break CALIPER HANDING
correct ‘hand’ of caliper. See See Page 5.
Fittings It is important to select the
note on page 4 for guidance.
correct ‘hand’ of caliper. See
PAD INFORMATION 151.9 (5.98”) note on page 4 for guidance.
- Iron Family = CP3558D54
(3.17”)

PAD INFORMATION 163.0 (6.41”)

80.6

- Carbon Family = CP4240 CP3558

- Pad Family = CP4970
- Pad Area =
- Pad Area = 81.9cm²
Iron = 80.17cm² 152.0 (5.98”)
- Pad Depth = 53.0mm
Carbon = 78.12cm²
- Pad Thickness = 31.5mm
64.00

- Pad Depth = 54.0mm CP4240

- Pad Thickness = 25.0mm INSTALLATION DRAWING 145.00 MAX 142.50 MAX

INSTALLATION DRAWING 139.00 MAX 139.00 MAX

Ø1.063” BORE
LEADING
Ø1.25” BORE
""%
25(
75$,/,1*
Ø22.00

Ø27.0 BORE Ø31.8 BORE 107.50 MAX

LEADING Ø38.1 BORE 96.80 MAX 99.00
91.00 MAX 63.53
TRAILING 58.20 MAX 56.20 MAX
‘PL DIM’N
89.00 MAX
37.75

86.00 MAX 25.0 25.0

33.75

R50.50 42.60 MAX42.60 MAX R50.50 MIN MIN

‘PL’ DIM’N

MAX INT’N INT’N

63.50

MAX
1.25x45° MIN
3.50 MAX

DIRECTION OF
29.75

DISC ROTATION
126.50 ‘U’ DIM’N

Ø12.20
12.10
0.25x45°

DIRECTION OF Ø12.20 R192.50

12.10 Ø22.00
DISC ROTATION PATHWAY RADIUS
R6 MAX
MIN
‘U’ DIM’N

R10 MAX
R11 MAX
R197.00 MAX

R5 MAX

EFFECTIVE RADIUS
R1

63.00 MAX
R4 MAX
R151.10 EFFECTIVE RAD

R181.70 MAX

24
R177.80 MAX

S DRY-BREAK FITTING OPTION

R9 MAX

DIU
.5

93.50 MAX
R174.50 MAX

R3 MIN

APPLY LOCTITE 270 TO THREAD

RA
0

R8 MIN

AY
R7 MIN

UPON ASSEMBLY TIGHTENING

M

THW
R2 MIN
IN

TORQUECP6300-6 FITTING (CALIPER)

R1 MIN

PA CP6300-7 FITTING (BLEEDING SYSTEM)

R122.80

79 .50 CP6300-8 SPARE DUST CAP * SEAL

DISC & WHEEL C R1 TYPICAL MTG
L TIGHTENING 210.00±0.05 MOUNTING HOLE CTRS
RADIAL PROFILE TORQUE FOR HYDRAULIC INLET
GUIDANCE SEE NOTE A
RADIAL PROFILE SCALED FOR A M10x1.0
(SCALED FOR A Ø380 DISC ONLY:
Ø355. DISC) 210.00 MOUNTING HOLE CTRS M12 - 65Nm
BLEEDSCREW INLET PORT & M10 - 54Nm
TIGHTENING N10x1.0
TORQUE 17Nm THERMO SENSOR
MAX THD SEE NOTE A (PT100 TYPE)
OPTIONAL PAD WEAR INDICATOR CP6282-2 (RH)
TYPICAL TIGHTENING CP5970-9 CAN BE FITTED TO MTG
OFFSET

CP6282-3 (LH)
42.00

DRY-BREAK FITTING TORQUE FOR GUIDANCE SIDE ONLY.

OPTION APPLY LOCTITE ONLY:M12 - 65Nm / M10 - 54Nm TO ENABLE THE USE OF WEAR BLEEDSCREW
270 TO THREAD UPON INDICATOR THE MIDDLE PISTON MAX
ASSEMBLY TIGHTENING NEEDS TO BE REPLACED WITH TIGHTENING
TORQUE CP5970-114 PISTON. TORQUE
42.00±0.05
OFFSET

CP6300-6 FITTING **WHEN RUNNING WEAR 17Nm

(CALIPER) INDICATOR THE MAX DISC
CP6300-7 FITTING PAD BE USED IS REDUCED
(BLEEDING SYSTEM) FROM 100-97MM**
CP6300-8 SPARE
DUST CAP * SEAL THERMO SENSOR
(PT100 TYPE) Disc Ø R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 EFF RAD
CP6282-2 (RH)
CP6282-3 (LH)
355 122.7 125.0 147.5 176.6 196.2 204.0 122.0 132.1 143.0 173.3 198.5 151.5
380 135.2 137.0 160.0 188.3 207.0 213.0 134.0 144.6 155.2 186.3 207.6 163.0

www.apracing.com +44 (0)24 7663 9595

 Japanese GT Brake Calipers 21

CUSTOMER NOTES
CP6086 - 6 Piston
New TECHNICAL
Product
SPECIFICATION
Ø27.0mm
Piston Sizes Ø31.8mm
Ø38.1mm
Disc Diameter
Iron Ø390.0mm
GENERAL INFORMATION Carbon Ø380.0mm
APPLICATIONS Disc Thickness
- Japanese GT. Iron 36.0mm
FEATURES Carbon 37.0mm
- Ducted air cooling as devel- Weight No Pads 2.86Kg
oped in F1 for Championship Hydraulic Thread M10x1.0
winning team. Mounting Type Radial
- Monobloc aluminium alloy Mtg centres 210.0mm
body, CNC machined billet. Mtg offset 42.0mm
- Radial mount. Mtg hole Ø 12.15mm
-To suit Ø390.0 x 36.0mm Iron, ‘PL’ Dimension 62.68mm
or Carbon discs. Seal Repair Kit CP4518-CEJ
- Differential bores. Bleed Screw 17Nm
to control pad taper. Tighting torque (12.5lbs/ft)
- Titanium pistons. SPARE PARTS
- High temperature seals. Pistons
- Ceramic piston insulation caps Ø27.0mm CP6055-110
fitted. Ø31.8mm CP6055-111
- Hard anodised surface Ø38.1mm CP6055-112
treatment. Piston Cap Kit. CP4528-CEJ
- Stainless steel bridge pipe, Wear Plates. x 4 CP6060-107
pad abutments & wear plates Bleed Screw CP3880-1
fitted. Fluid Pipes CP6086-6
- Rear Caliper Available. CP6518-7LB
CP6087 Family. AKB Spring Kit
SSL
- Replaces CP6075 Series. AVAILABLE OPTIONS
PART NUMBERS Thermo Sensor
- CP6086-2S7MC RHT. Right Hand CP6282-2
- CP6086-3S7MC LHT. Left Hand CP6282-3
CALIPER HANDING Dry-Break
See Page 5
It is important to select the Fittings
correct ‘hand’ of caliper. See
note on page 4 for guidance.
162.9 (6.41”)
PAD INFORMATION
- Iron Family = CP6210D54
(3.17”)
80.6

- Carbon Family = CP4970 CP6210

- Pad Area = 83.0cm²
- Pad Depth
163.0 (6.41”)
Iron = 53.0mm
Carbon = 54.0mm CP4970
- Pad Thickness = 30.0mm

INSTALLATION DRAWING 144.04 142.00

Ø1.25” Ø1.50” BORE
Ø1.063” BORE BORE TRAILING
102.20 MAX 103.20 MAX LEADING 22.0
56.12 MAX 52.12 MAX
9.44 MAX
‘PL’ DIMN
62.68

37.74
1.25x45° MIN

IRON PAD
DIRECTION OF
PROFILE
217.00 MAX
163.50 EFFECTIVE RADIUS

DISC ROTATION
214.71 MAX

131.50 ‘U’ DIMN

193.22 MAX

Ø12.15±0.05
191.01 MAX

50.92 MIN
R197.50
62.92 MAX
138.80 MIN
141.90 MIN
139.90 MIN

PATHWAY RADIUS 22.0

Ø390 DISC & WHEEL C

L BLEEDSCREW
RADIAL PROFILE MAX
TO SUIT Ø390 DISC 15.4 MAX 210.00±0.05 MTG HOLE CTRS TIGHTENING
FULL THRD INLET PORT M10x1.0 TORQUE
17Nm
TYPICAL MTG TIGHTENING
TORQUE FOR GUIDANCE
ONLY: M12 - 65Nm
& M10 - 54Nm
DRY-BREAK FITTING
OPTION APPLY LOCTITE
270 TO THREAD UPON
ASSEMBLY TIGHTENING THERMO
42.00±0.05

TORQUE SENSOR
OFFSET

CP6300-6 FITTING (PT100 TYPE)

(CALIPER) CP6282-2 (RH)
CP6300-7 FITTING CP6282-3 (LH)
(BLEEDING SYSTEM)
CP6300-8 SPARE
DUST CAP * SEAL

www.apracing.com +44 (0)24 7663 9595

22 Brake Calipers Rally

CP4848 - 8 Piston CP6320 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø25.4mm Ø36.0mm
Piston Sizes Piston Sizes
Ø31.8mm Ø44.5mm
Disc Diameter Disc Diameter Ø312.0mm
Max Ø378.0mm Disc Thickness 28.0mm
Min Ø366.0mm Weight No Pads 2.25Kg
Disc Thickness GENERAL INFORMATION Hydraulic Thread M10x1.0
GENERAL INFORMATION Max 40.0mm Mounting Type Radial
APPLICATIONS . APPLICATIONS.
Min 37.0mm Mtg centres 152.0mm
- WRC Tarmac Front. - WRC Gravel Front.
Weight No Pads 2.7Kg Mtg offset 44.0mm
FEATURES. Hydraulic Thread M10x1.0 FEATURES. Mtg hole Ø 12.0mm
- Radial mount. Mounting Type Radial - Radial mount. ‘PL’ Dimension 57.8mm
- To suit Ø378 to Ø366.0mm Mtg centres 210.0mm - To suit Ø312.00 x 28.0mm Seal Repair Kit CP4518-HL
Mtg offset 43.25mm Max disc. Bleed Screw
x 40.0 to 37.0mm Iron discs. Mtg hole Ø 12.20mm Tightening
17Nm
- Monobloc aluminium alloy - Monobloc aluminium alloy (12.5lbs/ft)
‘PL’ Dimension Torque
body, CNC machined billet. Ø378mm disc 63.5mm
body, CNC machined from
billet with hard anodised SPARE PARTS
- X-Beam bridge technology. Ø366mm disc 63.85mm Pistons
increased caliper stiffness. CP4518- surface treatment. Ø36.0mm CP6320-107
Seal Repair Kit
- 4 Pads. AEAE - Internally ported, no external Ø44.5mm CP3720-177
Bleed Screw bridge pipes. Pad Retainer H/Piece
- Differential bores, to control Tightening
17Nm
(12.5lbs/ft) - Single bleed screws. Retainer P/No. CP6320-111
pad taper. Torque R/Bolt Part No. CP3394-112
- Titanium pistons with Ceramic - Differential bores, to control
SPARE PARTS pad taper. Wear Plates
CP6320-106
piston insulation caps fitted. Pistons x4
- High temperature seals. Ø25.4mm CP4848-104 - Titanium pistons. CP6518-
- High temperature seals. AKB Springs Kit
- Optional Dry-break fittings & Ø31.8mm CP4848-105 4LBLL
body Thermo-sensor available. Piston Caps - Stainless steel pad abutments Bleed Screw CP3880-1
Ø25.4mm CP6292-153 & wear plates fitted.
- Stainless steel bridge pipe, Ø31.8mm CP5842-118
pad abutments & wear plates - Also available with 210mm
Pad Retainer Clip
fitted. (CP6520) & 180mm (CP6420)
CP4848-110
Retainer P/No. mounting hole centres.
- Bridge pipe and bleed screws RH / -111 LH
have integral protecting rib. CP4848-107 PART NUMBERS.
Wear Plates - CP6320-22S4M RHT
- A lightweight version is x 2 / -108 x 2
available, CP4849 - 2.4kg Bleed Screw CP3880-1 /-23S4M LHT /-24S4M RHL
Fluid Pipe /-25S4M LHL
PART NUMBERS. CP4848-2 & -4 CP4848-6
- CP4848-2S0MC RHT /-3S0MC CALIPER HANDING.
CP4848-3 & -5 CP4848-7
LHT /-4S0MC RHL/ -5S0MC LHL It is important to select the
AVAILABLE OPTIONS
CALIPER HANDING. Thermo Sensor correct ‘hand’ of caliper. See
It is important to select the CP6282-2 RH & CP6282-3 LH note on page 4 for guidance.
correct ‘hand’ of caliper. See Dry-Break 132.27 (5.20”)
Fitting
See page 5 PAD INFORMATION
note on page 4 for guidance. - Pad Family = CP3215D46

(2.19”)
55.75
CP3215D46
86.0 (3.38”) - Pad Area = 54.6cm²
PAD INFORMATION - Pad Depth = 45.6mm
- Pad Family = CP4848D46 - Pad Thickness = 16.8mm
63.0 (2.48”)

132.27 (5.20”)
- Pad Area = 35.5cm² - Pad Family = CP3215D50
- Pad Area = 57.4cm²
(2.19”)
- Pad Depth = 46.0mm
55.75

CP3215D50
- Pad Thickness = 18.0mm - Pad Depth = 50.3mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING INSTALLATION DRAWING

126.00 (4.96”) MAX 126.00 (4.96”) MAX
75.0 MAX 79.5 MAX

45.5 TO INT’N
TOP OF DISC &
98.2 (3.866”) ‘U’ DIMN PAD MAT’L TO

157.0 155.0
57.80 (2.275”)

MAX
MTG FACE
‘PL’ DIMN.
C/BORE
(1.517”)

DEPTH

Ø22.0
38.54
35.5

R4
Ø12.2
° MIN

‘PL’ DIM’N

R80
MTG FACE TO DISC
38.0

28.00 (1.10”) MAX

DISC THICKNESS
(206.0 MAX)
R212.4 MAX

R4
6.5° Ø24.0 MAX C.
DIS
MIN AX
(R161.0 MIN)

BOSS ON
R167.4 MIN

37.5 MIN ") M

DISC ROTATION .28
(R136.5 MIN)
(137.2 MIN)

UPRIGHT EFFEC
R143.5 MIN

R142.5 MIN

(12
(126.75 MIN)

TIVE
R132.8 MIN

0
125.5 NOM

119.15 NOM

RA
50.8 MAX 51.3 MAX DIUS 12.0 40”) RADIUS
‘N’
Ø3 R158.50 (6.2
Ø366 DISC
RADIAL PROFILE ON Ø378 DISC 79.88 MAX
Ø378.0 DISC
(FIGURES FOR Ø366.0 71.95 MAX
DISC & WHEEL C DISC IN BRACKETS 70.60 MAX 69.53 MAX
L
60.44 MAX
42.39 MAX 44.00 MAX IMPORTANT NOTE: ANTI-ROTATION
16.10 42.70 MAX MUST USE THIS PORT DEVICE FOR BANJO’S
MAX AS THE INLET 12.10 (0.472”)
Ø
152.00 (5.98”) MOUNTING HOLE CENTRES 11.90
MTG HOLE
DRY BREAK FITTINGS ARE AVAILABLE.
*
02 8-10

TIGHTENING TORQUE 13Nm Ø22.00 (0.866”)

ISS P484
C

PART No’s RADIAL PROFILE TO

CP6300-6 FITTINGS (CALIPER)
SUIT Ø312.00mm
44.00 (1.732”)

CP6300-11 FITTING (BLEED SYSTEM)

CP6300-8 SPARE DUST CAP
DISC
176.75 MAX
171.67 MAX

169.90 MAX

APPLY LOCTITE 270 TO THREAD

156.67 MAX

163.64 MAX

OFFSET
43.25 NOM

UPON ASSEMBLY
153.61 MAX
150.45 MAX
123.26 MIN

50.00 MAX 50.00 MAX

104.77 MIN

104.67 MIN
97.66 MIN
97.66 KIN

PROVISION IS MADE FOR

CALIPER C
L

THE FITTING OF 4 THREADED CUSTOM DESIGNED CALIPER BODY

INSERTS WITH AN M4.0x0.7 69.57 MAX
THERMO-SENSOR (PT100) TYPE
INTERNAL THREAD (CP6292-179) AVAILABLE - CP6282-2 (RH)
TO FACILITATE FITMENT OF
CP6282-3 (LH) 210.0 CTRS NOM
COOLING DUCTS ETC
DISC C
L

www.apracing.com +44 (0)24 7663 9595

 Rally Brake Calipers 23

CP6340 - 4 Piston CP6560 - 6 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø28.6mm Ø27.0mm
Piston Sizes Piston Sizes Ø31.8mm
Ø36.0mm
Disc Diameter Ø355.0mm Ø38.1mm
Disc Thickness 28.0mm Disc Diameter Ø310.0mm
Weight No Pads 2.2Kg Disc Thickness 32.0mm
Hydraulic Thread M10x1.0 Weight No Pads 2.2Kg
GENERAL INFORMATION Mounting Type Radial GENERAL INFORMATION Hydraulic Thread M10x1.0
APPLICATIONS. Mtg centres 152.0mm APPLICATIONS. Mounting Type Radial
- WRC Gravel Rear. Mtg offset 44.0mm - WRC Gravel Front. Mtg centres 210.0mm
Mtg hole Ø 12.0mm Mtg offset 40.0mm
FEATURES. FEATURES Mtg hole Ø 12.15mm
‘PL’ Dimension 57.8mm
- Radial mount. - Radial mount. ‘PL’ Dimension 57.5mm
Seal Repair Kit CP4518-DH
- To suit Ø355 x 28.0mm Max Bleed Screw - 210mm mounting centres. Seal Repair Kit CP4518-CEJ
disc. 17Nm - To suit Ø310.0mm x 32.0mm Bleed Screw
Tightening 17Nm
- Monobloc aluminium alloy (12.5lbs/ft) disc. Tightening
Torque (12.5lbs/ft)
body, CNC machined from SPARE PARTS - Monobloc aluminium alloy Torque
billet with hard anodised Pistons body, CNC machined from SPARE PARTS
Ø36.0mm CP6320-108 Pistons
surface treatment. billet with hard anodised
Ø44.5mm CP6320-107 Ø27.0mm CP6560-107
- Internally ported, no external surface treatment. Ø31.8mm CP6560-108
Pad Retainer H/Piece
bridge pipes. Retainer P/No. CP6320-111 - increased caliper stiffness. Ø38.1mm CP6560-109
- Single bleed screws. R/Bolt Part No. CP3394-112 - Internally ported, no external Wear Plates
- Differential bores, to control CP6320-106 bridge pipes. CP6560-110
Wear Plates Pad
pad taper. x4 - Differential bores, to control x4
CP6518- Centre Beam CP6065-104
- Titanium pistons. AKB Springs Kit pad taper.
4LBLL CP6518-
- High temperature seals. - Titanium pistons with provision AKB Springs Kit
Bleed Screw CP3880-1 4LBSSL
- Stainless steel pad abutments for ceramic coated caps. Bleed Screw CP3880-1
& wear plates fitted. - High temperature seals. AVAILABLE OPTIONS
- Smaller bore version of - H- Stainless steel bridge Thermo Sensor CP6282-2
CP6320. pipe, pad abutments & wear Piston Caps
PART NUMBERS. plates fitted. Ø27.0mm CP6060-127
Ø31.8mm CP5842-118
- CP6340-22S4M RHT PART NUMBERS.
Ø38.1mm CP6060-126
/-23S4M LHT /-24S4M RHL - CP6560-2S4MP RHT.
/-25S4M LHL / -3S4MP LHT. / -4S4MP RHL.
CALIPER HANDING. / -5S4MP LHL.
It is important to select the CALIPER HANDING.
correct ‘hand’ of caliper. See It is important to select the
note on page 4 for guidance. correct ‘hand’ of caliper. See
note on page 4 for guidance.
PAD INFORMATION 132.27 (5.20”)

- Pad Family = CP3215D46

(2.19”)
55.75

CP3215D46
- Pad Area = 54.6cm² PAD INFORMATION 132.27 (5.20”)

- Pad Depth = 45.6mm - Pad Family = CP3215D46

(2.19”)
- Pad Thickness = 16.8mm - Pad Area = 54.6cm²
55.75
132.27 (5.20”)
- Pad Family = CP3215D50 - Pad Depth = 45.6mm
- Pad Area = 57.4cm² - Pad Thickness = 16.8mm
(2.19”)
55.75

CP3215D50
- Pad Depth = 50.3mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING INSTALLATION DRAWING

79.10 MAX

126.00 (4.96”) MAX 126.00 (4.96”) MAX 69.90 MAX 49.40 MAX
35.20 30.10 126.50 MAX 126.50 MAX
MAX MAX
119.70 (4.713”) ‘U’ DIMN TOP OF DISC &
PAD MAT’L TO
57.80 (2.275”)

MTG FACE
‘PL’ DIMN.

Ø22.00
C/BORE
(1.512”)

DEPTH
38.4

28.80
‘PL’ DIMN
27.50

28.00 (1.10”) MAX

31.40

DISC THICKNESS
R7 MAX
MTG FACE TO DISC

R6 MAX
R4 MAX

N’
S‘
R3 MAX

R5 MAX

0.60x45° MIN

DIU 12.18
RA Ø
EFF 12.13
‘U’ DIMENSION

EC ”) 53.50 R1 DIRECTION OF
TIV 40 57
ER 6.2 MAX .50 DISC ROTATION
0(
R2 MIN

Ø355.
R1 MIN

00 M AD .5 PA
AX DISC IUS 80 TH
DIAM R1 RADIAL PROFILE WA
ETER. Y RA
79.88 MAX SCALED FOR A Ø304 DIU
70.10MAX 71.70 MAX S
69.40 MAX
DISC & CALIPERLC DISC & CALIPER C
L
61.80 MAX
45.00 MAX 44.65 MAX
21.80 20.60
MAX MAX RADIAL PROFILE DIM’N
ANTI-ROTATION 12.20
Ø 12.10 (0.472”)
DEVICE FOR 152.00 (5.98”) MOUNTING HOLE CENTRES Disc Ø 304.0 310.0 210.0 MOUNTING CENTRES
BANJO’S MTG HOLE
RADIAL PROFILE TO R1 95.6 98.6 2 OFF PORTS M10x1.0
SUIT Ø355.0mm MAX DEPTH OF THREAD
DISC Ø22.00 (0.866”) R2 104.0 107.0 OF THREAD 11MM
C/BORE (HYDRAULIC INLET TO
R3 153.1 155.8
44.00 (1.732”)

BE OPPOSITE END TO
192.10 MAX
179.10 MAX
196.25 MAX

R4 172.0 174.5
192.20 MAX

173.00 MAX

BLEED SCREW
187.50 MAX
182.10 MAX
171.95 MAX

OFFSET

50.00 MAX 50.00 MAX

OFFSET

40.00

R5 152.7 155.1
146.35 MIN
123.40 MIN

130.80 MIN
131.00 MIN

69.20 MAX
123.40 MIN

R6 171.1 173.4 TYPICAL MTG

TIGHTENING
R7 174.7 177.6
CALIPER C
L

TORQUE FOR
EFF RAD 128.3 131.2 GUIDANCE
ONLY M12 - 65Nm
DISC C
‘U’DIM’N 94.5 97.5 & M10 - 54Nm
L

www.apracing.com +44 (0)24 7663 9595

24 Brake Calipers Rally

CP6561 - 4 Piston CP6562 - 6 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Ø25.4mm
Piston Sizes
Ø34.0mm Piston Sizes Ø27.0mm
Disc Diameter Ø310.0mm Ø28.6mm
Disc Thickness 27.0mm Disc Diameter Ø310.0mm
Weight No Pads 1.6Kg Disc Thickness 27.0mm
Hydraulic Thread M10x1.0 Weight No Pads 1.7Kg
GENERAL INFORMATION Mounting Type Radial GENERAL INFORMATION Hydraulic Thread M10x1.0
APPLICATIONS. Mtg centres 130.0mm APPLICATIONS. Mounting Type Radial
- WRC Gravel Rear. Mtg offset 45.0mm - WRC Rear. Mtg centres 130.0mm
- WRC Tarmac Rear. Mtg hole Ø 10.15mm FEATURES. Mtg offset 45.0mm
FEATURES. ‘PL’ Dimension 50.0mm Mtg hole Ø 10.2/10.15mm
- Radial mount.
- Radial mount. Seal Repair Kit CP4518-CF ‘PL’ Dimension 50.0mm
Bleed Screw - 130mm mounting centres. Seal Repair Kit CP4518-ACD
- To suit Ø310.0mm x 27.0mm Tightening
17Nm - Suits Ø310mm x 27.0mm Bleed Screw
disc. (12.5lbs/ft) 17Nm
Torque disc. Tightening
- Monobloc aluminium alloy (12.5lbs/ft)
SPARE PARTS - Monobloc aluminium alloy Torque
body, CNC machined from Pistons body, CNC machined from SPARE PARTS
billet with hard anodised Ø27.0mm CP6561-107 billet with hard anodised Pistons
surface treatment. Ø34.0mm CP6561-108 surface treatment. Ø25.4mm CP6562-104
- increased caliper stiffness. Wear Plates Ø27.0mm CP6562-114
CP6561-106 - Internally ported, no external Ø28.6mm CP6562-105
- Internally ported, no external Pad bridge pipes. Piston Caps
x4
bridge pipes. Centre Beam CP6561-109 - Tapped holes for mounting Ø25.4mm CP6292-153
- Single protected bleedscrew. CP6518- water sprays. Ø27.0mm CP6060-127
AKB Spring Kit
- Differential bores, to control 4LBLL - Optional stone guards Ø28.6mm CP6060-128
pad taper. Bleed Screw CP3880-1 Wear Plates
available.
- Titanium pistons with provision AVAILABLE OPTIONS CP6560-110
- Differential bores, to control Pad
Thermo Sensor CP6282-2 x4
for ceramic coated caps. pad taper. Centre Beam CP6065-104
Piston Caps
- High temperature seals. - Titanium pistons fitted with CP6518-
Ø27.0mm CP6060-127 AKB Spring Kit
- Hard anodised surface Ø34.0mm CP5842-117 ceramic insulation caps. 4LBLLL
treatment. - High temperature seals. Bleed Screw CP3880-1
PART NUMBERS. - Stainless steel bridge pipe, AVAILABLE OPTIONS
- CP6561-2S4MP RHT pad abutments & wear plates Thermo Sensor CP6282-2
/ -3S4MP LHT / -4S4MP RHL Stone Guard CP6562-6
fitted.
/ -5S4MP LHL PART NUMBERS.
CALIPER HANDING. - CP6562-2S4MC RHT
It is important to select the / -3S4MC LHT / -4S4MC RHL
correct ‘hand’ of caliper. See / -5S4MC LHL.
note on page 4 for guidance. CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
PAD INFORMATION 113.47 (5.20”) note on page 4 for guidance.
- Pad Family = CP3345D44
52.10 (2.05”)

PAD INFORMATION 132.27 (5.20”)

- Pad Area = 43.4cm²
- Pad Depth = 44.1mm - Pad Family = CP3215D46
(2.19”)
- Pad Area = 54.6cm²
55.75

- Pad Thickness = 16.0mm

- Pad Depth = 45.6mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING INSTALLATION DRAWING

67.00 MAX 74.00 MAX 67.50 MAX 75.50 MAX
R10.00 41.00 MAX 113.5 MAX 113.5 MAX 120.50 MAX 120.50 MAX
15.00 15.00 MAX
30.80 28.20 Ø1.0” BORE Ø1.063” BORE
MAX Ø18.00
MAX MAX LEADING
Ø1.125” BORE
24.80

‘PL’ DIMN

TRAILING
175.5 MAX (172.5 MAX)

50.00
176.3 MAX (173.6 MAX)
166.3 MAX (163.3 MAX)

28.80
30.20

‘PL’ DIM’N
153.5 MAX (150.5 MAX)

50.00

30.20

R4.00
0.60x45°
110.0 MIM (107.1 MIN)

DIRECTION OF DISC
103.0 MIN (103.0 MIN)

Ø10.20
131.80 EFFECTIVE RADIUS

R1
172.00 MAX

174.70 MAX

57 10.10 ROTATION
154.70 MAX

.5
149.60 MAX

R1
105.0 (102.0)

0.60x45° MIN

49.50 MAX PA 5
TH 7. Ø10.20
105.00 ‘U’ DIM’N

W 50
‘U’ DIMN

AY 47.00 MAX 10.10 DIRECTION OF

R108.00 MIN

PA
RA TH DISC ROTATION
R100.50 MIN

DIU W
RADIAL PROFILE ON A S AY
Ø310MM DISC RA
DI
WITH Ø304MM DISC US
IN BRACKETS DISC & WHEEL CL RADIAL PROFILE
DISC & WHEEL
L C
(SCALED FOR A
2 OFF N10x1.0 PORTS Ø304 DISC)
MAX DEPTH OF THREAD
8MM (HYDRAULIC INLET
TO BE OPPOSITE END TO BLEED SCREW
130.00 MTG HOLE CTR’S 2 OFF LOCKING ‘KEENSERT’ 40.00° TIGHTENING TORQUE
BLEED SCREW) 130.0
INSERTS FITTED. WITH 4MMx0.7 17Nm
1.35

MTG HOLE CTR’S

INTERNAL THREADS TO
9.30
9.25

FACILITATE FITMENT OF TYPICAL MTG

THERMO SENSOR (PT100 TYPE) COOLING DUCTS TIGHTENING
OPTION - CP6282-2 TORQUE FOR
OFFSET

‘PUSH IN’ TYPE

GUIDANCE
45.00

INLET Ø8.80
OFFSET

ONLY
45.00

M12 - 65Nm
M10 - 54Nm
THERMO SENSOR
(Pt100 TYPE)
OPTION - CP6282-2

STONE GUARD
OPTION

www.apracing.com +44 (0)24 7663 9595

 Rally Brake Calipers 25

CP6564 - 4 Piston CP6720 & CP6730 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø28.6mm Piston Sizes
Piston Sizes
Ø36.0mm CP6720 Ø34.9mm
Disc Diameter Ø356.0mm Ø41.3mm
Disc Thickness 32.0mm CP6730 Ø31.8mm
Weight No Pads 2.1Kg Disc Diameter
Hydraulic Thread M10x1.0 Max Ø355.0mm
GENERAL INFORMATION Mounting Type Radial GENERAL INFORMATION Min Ø285.0mm
APPLICATIONS. Mtg centres 210.0mm APPLICATIONS. Disc Thickness 28.0mm
- WRC Rear. Mtg offset 40.0mm - Super 1600 / S2000 Rally. Weight No Pads
FEATURES. Mtg hole Ø 12.15mm - Rally Raid. CP6720 2.5Kg
‘PL’ Dimension 57.5mm CP6730 2.6Kg
- Radial mount. FEATURES.
Seal Repair Kit CP4518-DH Hydraulic Thread M10x1.0
- Suits Ø358mm x 32.0mm Bleed Screw - Radial mount. Mounting Type Radial
disc. 17Nm - To suit Ø355.0 to 285.0mm x
Tightening Mtg centres 180.0mm
- Monobloc aluminium alloy (12.5lbs/ft) 28.0mm disc.
Torque Mtg offset 35.0mm
body, CNC machined from SPARE PARTS - Two piece aluminium alloy Mtg hole Ø 12.15mm
billet for increased caliper Pistons body, CNC machined from ‘PL’ Dimension 57.8mm
Ø28.6mm CP6564-106 high quality die castings. Seal Repair Kit
stiffness.
Ø36.0mm CP6564-107 - Internally ported, no external CP6720 CP4518-GK
- Internally ported, no external CP6730 CP4518-EE
Wear Plates bridge pipes.
bridge pipes. CP6560-110 Bleed Screw
Pad - Protected bleed screws. 17Nm
- Single protected bleedscrew. x4 Tightening
- Differential bores, to control (12.5lbs/ft)
- Differential bores, to control Centre Beam CP6560-106 Torque
pad taper. CP6518- pad taper. SPARE PARTS
AKB Spring Kit - Aluminium pistons standard,
- Stainless steel pistons. 4LBLL Pistons
- High temperature seals. Bleed Screw CP3880-1 Stainless steel optional. Ø34.9mm CP3567-108
AVAILABLE OPTIONS - High temperature seals. Ø41.3mm CP3344-109
- Hard anodised surface Ø31.8mm CP3349-103
treatment.
Thermo Sensor CP6282-2 - Stainless steel pad abutments
Pad Retainer H/Piece
& wear plates fitted.
PART NUMBERS. Retainer P/No. CP6720-101
N.B. See CP6740 for a Ret / Bolt P/No. CP3345-118
- CP6564-2R4L RHT.
version with dirt seals. Wear Plates CP5200-306
- CP6564-3R4L LHT.
PART NUMBERS. AKB Spring Kits
CALIPER HANDING.
- CP6720-6S4 RHT. / -7S4 CP6518-
It is important to select the CP6720
LHT. / -8S4 RHL. / -9S4 LHL. 4LBLL
correct ‘hand’ of caliper. See CP6518-
- CP6730-2S4 RH. / -3S4 LH CP6730
note on page 4 for guidance. 4LBSS
CALIPER HANDING. Bleed Screw CP3880-1
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance.
132.27 (5.20”)
PAD INFORMATION
- Pad Family = CP3215D46

(2.19”)
55.75
PAD INFORMATION 132.27 (5.20”) CP3215D46
- Pad Area = 54.6cm²
- Pad Family = CP3215D46 - Pad Depth = 45.6mm
(2.19”)

- Pad Area = 54.6cm²

55.75

- Pad Thickness = 16.8mm 132.27 (5.20”)

- Pad Depth = 45.6mm - Pad Family = CP3215D50
- Pad Thickness = 16.8mm
(2.19”)

- Pad Area = 57.4cm²

55.75

CP3215D50
- Pad Depth = 50.3mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING INSTALLATION DRAWING

W1 MAX W5 MAX
126.50 MAX 126.50 MAX
273.00
W4 MAX
136.50
W2 MAX W3 MAX
Ø28.6 (1.125”) BORE Ø36.00 BORE
LEADING TRAILING
(’PL’ DIMN)
26.71
‘PL’ DIM’N

57.80
57.50

33.30
30.79
6.00
R6 MAX
R1 MAX
R2 MAX

R5 MAX

Ø15.03
0.60x45° MIN

W6 MAX R1 15.00
DISC C
L
81 DIRECTION OF
.50 Ø12.20 DIRECTION OF
‘U’ DIM’N

PA DISC ROTATION
R3 MIN

MAX TIGHTENING
R4 MIN

TH 12.10
DISC ROTATION
W TORQUE FOR INLET AY
DIMN ‘U’

AY W
RA M6 PAD RETAINER PORT TH
RADIAL PROFILE DIU
SCREWS = 17.6Nm M10x1.0 PA
SCALED FOR A S C
Ø304 DISC
BLEED SCREW MAX THREAD ’ DIS
TIGHTENING TORQUE ‘N
D
17Nm RA Ø22.00
210.00 MTG HOLE CTR’S
2 OFF PORTS M10x1.0 C/BORE
MAX DEPTH OF THREAD DISC & WHEELLC
THERMO SENSOR (Pt100 TYPE) OF THREAD 10MM.
OPTION - CP6282-2 (HYDRAULIC INLET TO 12.20
BE OPPOSITE END TO Ø
BLEED SCREW 180.00±0.05 MOUNTING HOLE CENTRES 12.10
OFFSET

MTG HOLES
40.00

For Radial
TYPICAL MTG TIGHTENING
OFFSET

Profile information.
35.00

TORQUE FOR GUIDANCE ONLY:

M12 - 65Nm
M10 - 54Nm DISC C
Please contact L

Disc Ø R1 R2 R3 R4 R5 R6 W1 W2 W3 W4 W5 W6
EFF ‘U’ AP Racing Technical
RAD DIM’N
304
358
170.3 153.7 104.3 96.4 159.2 177.2 70.4 33.3 6.0 28.2 80.4 53.3 129.3 94.5
194.2 180.6 130.5 123.4 175.9 201.2 70.4 39.8 6.1 35.2 80.4 53.3 155.7 121.5
Section.

www.apracing.com +44 (0)24 7663 9595

26 Brake Calipers Rally

CP6740 - 4 Piston CP6750 - 6 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Sizes Ø31.8mm Ø27.0mm
Disc Diameter Piston Sizes Ø31.8mm
Max Ø355.0mm Ø38.1mm
Min Ø285.0mm Disc Diameter Ø320.0mm
Disc Thickness 28.0mm Disc Thickness
Weight No Pads 2.6Kg CP6750-2/3/4/5 28.0mm
GENERAL INFORMATION Hydraulic Thread M10x1.0 GENERAL INFORMATION CP6750-6/7/8/9 32.0mm
APPLICATIONS. Mounting Type Radial APPLICATIONS. Weight No Pads 3.0Kg
- Rally Raid Rear. Mtg centres 180.0mm - Rally Raid. Hydraulic Thread M10x1.0
FEATURES. Mtg offset 35.0mm FEATURES. Mounting Type Radial
Mtg hole Ø 12.15mm Mtg centres 180.0mm
- Radial mount. - Radial mount.
‘PL’ Dimension 57.8mm Mtg offset
- Small bore version of CP4518-EE: - To suit Ø320.0mm x 32.0 or CP6750-2/3/4/5 35.0mm
CP6720 for rear applications. Seal Repair Kit 28.0mm disc.
RALLY CP6750-6/7/8/9 37.0mm
- As CP6730 but with dirt seals Bleed Screw - Two piece body machined Mtg hole Ø 12.15mm
17Nm
fitted. Tightening from billet aluminium alloy. ‘PL’ Dimension 62.5mm
(12.5lbs/ft) CP4518-
- To suit Ø285.0 to 355.0mm x Torque - Internally ported, no external Seal Repair Kit
SPARE PARTS CEJ:RALLY
28.0mm disc. bridge pipes.
Pistons CP6740-110 Bleed Screw
- Two piece aluminium alloy - Single protected bleedscrew. 17Nm
Pad Retainer H/Piece Tightening
body, CNC machined from - Differential bores, to control (12.5lbs/ft)
Retainer P/No. CP6720-101 Torque
high quality die casting. Ret / Bolt P/No. CP3345-118 pad taper. SPARE PARTS
- Protected bleed screws. Wear Plates CP5200-306 - Stainless steel pistons. Pistons
- Internally ported, no external AKB Spring
CP6518- - H/Piece pad retainer. Ø27.0mm CP6750-106
bridge pipes. 4LBSS - High temperature seals. Ø31.8mm CP6750-107
- Stainless steel pistons. Bleed Screw CP3880-1 - Hard anodised surface Ø38.1mm CP6750-108
Pad Retainer H/Piece
- High temperature seals. treatment. Ret / Part No.
- Hard anodised surface PART NUMBERS. CP6750-2/3/4/5 CP6750-109
treatment. - To suit a disc Ø320 x 28mm CP6750-6/7/8/9 CP6750-113
- Stainless steel pad abutments CP6750-2S4L RHT /-3S4L Ret / Bolt P/No. CP3345-123
& wear plates fitted. LHT /-4S4L RHL /-5S4L LHL Wear Plates
PART NUMBERS. - To suit a disc Ø320 x 32mm. CP6750-110 x 1 / -111 x 1 & -112
x2
- CP6740-2S4L (RH). CP6750-6S4L RHT /-7S4L Bleed Screw CP3880-1
- CP6740-3S4L (LH). LHT /-8S4L RHL /-9S4L LHL
CALIPER HANDING. CALIPER HANDING.
It is important to select the It is important to select the
correct ‘hand’ of caliper. See correct ‘hand’ of caliper. See
note on page 4 for guidance. note on page 4 for guidance.

132.27 (5.20”)
PAD INFORMATION
- Pad Family = CP3215D46
(2.19”)
55.75

CP3215D46 151.9 (5.98”)

- Pad Area = 54.6cm² PAD INFORMATION
- Pad Depth = 45.6mm - Pad Family = CP3894D51

(3.17”)
- Pad Thickness = 16.8mm - Pad Area = 73.5cm²
80.6
132.27 (5.20”)
- Pad Family = CP3215D50 - Pad Depth = 50.8mm
- Pad Thickness = 18.0mm
(2.19”)

- Pad Area = 57.4cm²

55.75

CP3215D50
- Pad Depth = 50.3mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING 273.00

INSTALLATION DRAWING W5 MAX 136.40 MAX 136.40 MAX
136.50 W4 MAX W6 MAX
Ø1.125” BORE Ø1.50” BORE
W3 MAX W7 MAX Ø1.0625” BORE TRAILING
(LEADING)
(’PL’ DIMN)

Ø22.00
57.80

33.79

‘PL’ DIM’N
33.30

62.50
39.00
134.50 EFFECTIVE RADIUS
178.90 MAX
162.80 MAX

162.30 MAX
R146.30 MAX

DISC C
L Ø12.20
R124.20 MIN

W1 MAX
R107.80 MAX
120.50 MAX

97.50 ‘U’ DIM’N

12.10 DIRECTION OF
R103.60 MIN

MAX TIGHTENING DIRECTION OF

W2 MAX DISC ROTATION
DISC ROTATION
TORQUE FOR INLET AY
DIMN ‘U’

HW
0.60X45° MIN

M6 PAD RETAINER PORT Ø22.00 BLEED SCREW MAX

T
PA R162 TIGHTENING TORQUE
2 PLACES

SCREWS = 17.6Nm M10x1.0 .50 P

ISC RADIAL PROFILE ATH 17Nm
THREAD ’D (SCALED FOR A
W AY
RAD
‘N IUS
D Ø320x28 DISC)
RA Ø22.00
C/BORE
180.00 MOUNTING HOLE CTRS
DISC & WHEELLC
DEPTH
10.00
MAX

HYDRAULIC INLET
THD

TYPICAL MTG TIGHTENING M10x1.0

12.20
Ø TORQUE FOR GUIDANCE
180.00±0.05 MOUNTING HOLE CENTRES 12.10 ONLY:
MTG HOLES M12 - 65Nm
M10 - 54Nm

For Radial
OFFSET

PAD RETAINER BOLTS SHOULD BE

TIGHTENED TO A TORQUE OF 20Nm
Profile information.
OFFSET
35.00

AP RACING ALSO RECOMMEND

THAT BOLTS ARE LOCKWIRED IN PLACE

Please contact DISC C

L

AP Racing Technical
Disc Width W1 W2 W3 W4 W5 W6 W7
Section. 28.0 47.8 66.5 47.1 70.0 79.6 72.5 44.8
320. 49.8 68.5 49.1 72.0 81.6 74.5 46.8

www.apracing.com +44 (0)24 7663 9595

 Rally Brake Calipers 27

CUSTOMER NOTES
CP6760 - 4 Piston
TECHNICAL
SPECIFICATION
Ø27.0mm
Piston Sizes
Ø34.0mm
Disc Diameter Ø300.0mm
Disc Thickness 28.0mm
Weight No Pads 2.1Kg
Hydraulic Thread M10x1.0
GENERAL INFORMATION Mounting Type Radial
Mtg centres 180.0mm
APPLICATIONS. Mtg offset 35.0mm
- S2000 Rear Mtg hole Ø 10.15mm
FEATURES. ‘PL’ Dimension 57.8mm
- Radial mount. Seal Repair Kit CP4518-CF
- To suit Ø300mm x 28.0mm Bleed Screw
17Nm
disc. Tightening
(12.5lbs/ft)
Torque
- Two piece body machined
from billet aluminium alloy.
SPARE PARTS
Pistons
- Internally ported, no external Ø27.0mm CP4907-106
bridge pipes. Ø34.0mm CP6760-118
- Single protected bleedscrew. Pad Retainer H/Piece
- Differential bores, to control Retainer P/No. CP4144-101
pad taper. Ret / Bolt P/No. CP3344-165
Wear Plates CP6561-106
- Stainless steel pistons. Bleed Screw CP3880-1
- H/Piece pad retainer.
- High temperature seals.
- Hard anodised surface
treatment.
PART NUMBERS.
- CP6760-2S4L RHT / -3S4L
LHT / -4S4L RHL / -5S4L LHL
CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance.

113.47 (5.20”)
PAD INFORMATION
52.10 (2.05”)

- Pad Family = CP3345D44

- Pad Area = 43.4cm²
- Pad Depth = 44.1mm
- Pad Thickness = 16.0mm

INSTALLATION DRAWING
79.50 MAX 230.00
230.00
70.50 MAX 70.50 MAX
27.0 (1.063”) 34.0 (1.339”)
37.2 MAX 37.2 MAX
LEADING BORE TRAILING BORE
Ø22.00
24.65
‘PL’ DIM’N
57.80

33.15
R168.60 MAX

127.90 EFFECTIVE RADIUS

R150.20 MAX

R141.60 MAX
R140.00 MAX

0.25x45° MIN
4.90 MIN

45.25 MAX 45.25 MAX

R117.40 MIN
R115.80 MIN

Ø12.20
R104.25 MIN

R0.50 DIRECTION OF AY
R102.25 MIN

12.10 MAX DISC ROTATION HW

‘U’ DIM’N

T
BLEED SCREW Ø16.05 PA
TIGHTENING 15.95 SC
RADIAL PROFILE DI
(SCALED FOR A TORQUE . 40
17Nm 52
Ø300 DISC) R1

180.00 MTG HOLE CTRS

10.00
MAX

HYDRAULIC INLET
FULL
THD

TYPICAL MTG TIGHTENING

M10x1.0
TORQUE FOR GUIDANCE ONLY:
M12 - 65Nm
M10 - 54Nm

MAX TIGHTENING
OFFSET

TORQUE FOR M6
35.00

PAD RETAINER SCREWS

= 18Nm

www.apracing.com +44 (0)24 7663 9595

28 Brake Calipers Single Seater

CP4567 - 4 Piston CP5090 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø34.9mm Ø38.1mm
Piston Sizes Piston Sizes
Ø41.3mm Ø44.5mm
Disc Diameter Ø280.0mm Disc Diameter Ø280.0mm
Disc Thickness Disc Thickness 30.0mm
-2 /-3 /-4/ -5 25.4mm Weight No Pads 2.3Kg
GENERAL INFORMATION -8 /-9 / -10 /-11 20.0mm GENERAL INFORMATION Hydraulic Thread M10x1.0
-18 /-19 /-20 /-21 11.5mm APPLICATIONS. Mounting Type Radial
APPLICATIONS. Weight No Pads 1.6Kg Mtg centres 152.0mm
- Front & Rear for 13” wheels. - Front & Rear for 13” wheels.
Hydraulic Thread M10x1.0 Mtg offset 48.0mm
FEATURES. Mounting Type Radial FEATURES. Mtg hole Ø 10.2mm
- Radial mount, two piece Mtg centres 152.0mm - Radial mount. ‘PL’ Dimension 57.8mm
aluminium alloy body, Mtg offset - Two piece cast aluminium Seal Repair Kit CP4518-JL
machined from high quality -2 /-3 /-4/ -5 30.0mm alloy body. Machined from Bleed Screw
17Nm
-8 /-9 / -10 /-11 27.3mm high quality die castings. Tightening
die castings. -18 /-19 /-20 /-21 22.85mm
(12.5lbs/ft)
Torque
- To suit Ø280.0mm x 25.4mm Mtg hole Ø 10.2mm
- To suit Ø280.0mm x 30.0mm
disc. SPARE PARTS
/ 20.0 or 11.5mm discs. ‘PL’ Dimension 50.5mm Pistons
- Differential bores, to control Seal Repair Kit CP4518-GK - Differential bores, to control Ø38.1mm CP3636-107
pad taper. Bleed Screw
17Nm
pad taper. Ø44.5mm CP3394-110
- Aluminium pistons. Tightening - Aluminium alloy pistons. Pad Retainer H/Piece
(12.5lbs/ft)
Torque - High temperature seals. Retainer P/No. CP3795-101
- High temperature seals.
- Single bolt pad retainer.
SPARE PARTS - Hard anodised surface Ret / Bolt P/No. CP3439-111
Pistons Wear Plates CP5080-108
- Hard anodised surface treatment.
Ø34.9mm CP4567-114 CP6518-
treatment. - H/Piece pad retainer. AKB Spring Kit
Ø41.3mm CP4270-3 4LBLL
- Stainless steel bridge pipe, Pad Retainer Bolt - Stainless steel bridge pipe, Bleed Screw CP3880-1
pad abutments & wear plates Retainer P/No. CP5100-116 pad abutments & wear plates Fluid Pipe CP5080-109
fitted. Ret / Bolt P/No. CP5100-120 fitted.
Wear Plates CP4567-120 PART NUMBERS.
PART NUMBERS. CP6518-
- To suit disc Ø280 x 25.4mm AKB Spring Kit - CP5090-2S4 RHT / -3S4
4LBLL
CP4567-2S4 RHT / -3S4 LHT Bleed Screw CP3720-173 LHT / -4S4 RHL / -5S4 LHL.
/ -4S4 RHL / -5S4 LHL Fluid Pipe CALIPER HANDING.
- To suit disc Ø280 x 20mm -2 /-3 /-4/ -5 CP4567-6 It is important to select the
CP4567-8S4 RHT / -9S4 LHT -8 /-9 / -10 /-11 CP4567-7 correct ‘hand’ of caliper. See
-18 /-19 /-20 /-21 CP4567-17 note on page 4 for guidance.
/ -10S4 RHL / -11S4 LHL
- To suit disc Ø280 x 11.5mm
CP4567-18S4 RHT / -19S4
LHT / -20S4 RHL / -21S4 LHL
CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance. 131.3 (5.17”)
PAD INFORMATION
- Pad Family = CP2279D42

(2.02”)
PAD INFORMATION 113.47 (5.20”)
- Pad Area = 51.2cm²
- Pad Family = CP3345D44 54.1
52.10 (2.05”)

- Pad Depth = 42.0mm

- Pad Area = 43.4cm² - Pad Thickness = 20.4mm
- Pad Depth = 44.1mm
- Pad Thickness = 16.0mm

INSTALLATION DRAWING 112.5 112.5 TOP OF

INSTALLATION DRAWING
26.30

INLET PORT 126.0 MAX

DISC & PAD BLEED SCREW MAX. TIGHTENING 123.0
M10X1.0
MATERIAL TORQUE = 17Nm
Ø38.10 (1.50”) Ø44.45 (1.75”)
LEADING TRAILING
DIMN ‘PL’
33.00

50.5

28.3

DIM’N ‘PL’
57.8
38.50

DISC
WIDTH DS DISC ROTATION
C
OU
DIMN ‘U’

TS 42.5 13.9 DISC ROTATION

PAD RETAINING BOLT SHOULD BE TIGHTENED ID S1 US
82.20 DIM’N ‘U’

TO A TORQUE OF 13.1Nm (9.7 Lb/ft)

ED DIU 77.00 MAX 85.30 MAX DI
IA RA 40.4 RA
M
ET AY E
W2 MAX W1 MAX ER HW TIV
IMPORTANT NOTE AT 79.50 MAX
W3 MAX W4 MAX 28
0.0 CP FE
C R141.80 DISC
4.00
DISC & CALIPER MOUNTING M DIS EF PATHWAY RADIUS
W5 MAX 30° TOLERNCES TO BE SUCH THAT M 73.00 MAX 40
R4.0 DISC & WHEEL C 7.
DISC IS CENTRAL TO CALIPER 11
TO WITHIN ±0.5MM 44.00 MAX 57.00 MAX
MTG HOLE CENTRES 152.00 10.2 INLET PORT
MTG HOLES M10x1.0
152.00 MTG HOLE CTRS Ø18.00
C/BORE
RADIUS 154.9 MAX
RADIUS 156.5 MAX

RADIUS 156.6 MAX

EFFECTIVE RADIUS 117.85

RADIUS 143.9 MAX

Ø10.25
10.15
OFFSET

156.40 MAX

143.40 MAX
RADIUS 92.0 MIN

146.00 MAX
RADIUS 89.0 MIN

128.00 MAX

48.00 OFFSET

W6 MIN
110.00 MIN

W7 MAX
89.00 MIN

85.50 MIN

CALIPER RADIAL 54.00 MAX 54.00 MAX

PROFILE (SCALED
ON A Ø280 DISC)

DISC AND WHEEL C

L
Disc W1 W2 W3 W4 W5 W6 W7
PAD RETAINER BOLT MAX
280 x 11.5 58.0 58.8 42.0 40.5 35.0 23.2 35.0 TORQUE 15Nm (11lb/ft)
280 x 20.0 62.3 63.5 45.3 44.8 39.3 26.8 38.8
280 x 25.4 65.0 66.2 48.0 47.5 42.0 29.5 41.5

www.apracing.com +44 (0)24 7663 9595

 Single Seater Brake Calipers 29

CP7030 - 4 Piston CP7606 & CP7613 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø34.9mm Piston Sizes
Piston Sizes
Ø41.3mm CP7606 Ø38.1mm
Disc Diameter Ø278.0mm CP7613 Ø31.8mm
Disc Thickness Disc Diameter
Max 17.0mm Max Ø295.0mm
Min 16.0mm Min Ø267.0mm
GENERAL INFORMATION Weight No Pads 1.5Kg GENERAL INFORMATION Disc Thickness
APPLICATIONS. Hydraulic Thread M10x1.0 APPLICATIONS. Max 18.0mm
- F3 Front & Rear. Mounting Type Radial - Light Formula Cars. Min 16.0
FEATURES. Mtg centres 120.0mm FEATURES. Weight No Pads 1.7Kg
Mtg offset 40.0mm Hydraulic Thread M10x1.0
- Radial mount. - Radial mount.
Mtg hole Ø 10.2mm Mounting Type Radial
- To suit Ø278.0mm x 17.0 / ‘PL’ Dimension 50.3mm - To suit Ø295.0mm Max Mtg centres 130.0mm
16.0mm disc. Seal Repair Kit CP4518-GK Ø267.0mm Min x 18.0mm Mtg offset 37.25mm
- Two piece aluminium alloy Bleed Screw disc. Mtg hole Ø 10.2mm
17Nm
body, CNC machined from Tightening - Two piece aluminium alloy ‘PL’ Dimension 53.0mm
(12.5lbs/ft)
billet. Torque body, machined from high Seal Repair Kit
SPARE PARTS CP7606 CP4518-JJ
- Lightweight. quality die castings.
Pistons CP7613 CP4518-EE
- Differential bores, to control - Aluminium alloy pistons. Bleed Screw
Ø34.9mm CP7030-108 17Nm
pad taper. Ø41.3mm CP7030-107 - Pin pad retainer. Tightening
(12.5lbs/ft)
- Aluminium pistons. Wear Plates CP7030-106 - Stainless steel bridge pipe, Torque
- High temperature seals. Bleed Screw CP3720-173 pad abutments & wear plates SPARE PARTS
- Hard anodised surface Fluid Pipe CP7030-6 fitted. Pistons
treatment. PART NUMBERS. CP7606 CP7605-109
CP7613 CP7613-106
- Stainless steel bridge pipe, - To suit Ø38.1mm bores.
Pad Retainer Pin
pad abutments & wear plates CP7606-12S0 RHT / -13S0 Retainer P/No. CP7605-108
fitted. LHT / -14S0 RHL / -15S0 LHL. Wear Plates CP7605-116
- Complete system (calipers, - To suit Ø31.8mm bores. Bleed Screw CP3880-1
discs and bells) available. CP7613-4S0 RHT / -5S0 LHT. Fluid Pipe CP7606-10
PART NUMBERS. CALIPER HANDING.
- CP7030-2S0 RHT / -3S0 It is important to select the
LHT / -4S0 RHL / -5S0 LHL. correct ‘hand’ of caliper. See
CALIPER HANDING. note on page 4 for guidance.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance.

113.47 (5.20”) 113.48 (4.46”)

PAD INFORMATION PAD INFORMATION
- Pad Family = CP3345D38 - Pad Family = CP7600D46
(2.05”)
52.10

- Pad Area = 38.7cm² - Pad Area = 43.5cm²

(2.29”)
- Pad Depth = 38.0mm - Pad Depth = 46.2mm 58.37

- Pad Thickness = 16.0mm - Pad Thickness = 16.0mm

INSTALLATION DRAWING INSTALLATION DRAWING

TOP OF PAD / DISC

59.90
53.00 ‘PL’ DIMN

59.40 59.40
54.90 54.90
34.00 34.00

R4.50
UPRIGHT DIMN
(‘U’ DIMN)
EFFECTIVE RADIUS
156.45

Ø267.
138.40

138.40

00 DISC
126.70

DIMN
124.20
117.40

DISC & WHEELLC

100.50

39.50 62.40
85.45
82.45

COVER HALF MOUNTING HALF

CALIPER RADIAL PROFILE AS FITTED ON A Ø267.00 DISC

OFFSET
37.25

130.0 MOUNTING CENTRES Ø10.20

www.apracing.com +44 (0)24 7663 9595

30 Brake Calipers Touring Cars

CP5560 - 6 Piston CP5788 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Ø38.1mm
Piston Sizes
Piston Sizes Ø31.8mm Ø44.5mm
Ø38.1mm Disc Diameter
Disc Diameter Ø343.0mm Max Ø356.0mm
Disc Thickness 32.0mm Min Ø295.0mm
Weight No Pads 2.85Kg Disc Thickness 32.0mm
GENERAL INFORMATION Hydraulic Thread M10x1.0 GENERAL INFORMATION Weight No Pads 2.3Kg
APPLICATIONS. Mounting Type Radial APPLICATIONS. Hydraulic Thread M10x1.0
- Budget Racing Series. Mtg centres 180.0mm - World Touring Car . Mounting Type Radial
FEATURES. Mtg offset 44.0mm FEATURES. Mtg centres 180.0mm
Mtg hole Ø 12.15mm Mtg offset 42.0mm
- Radial mount, two piece - Radial mount.
‘PL’ Dimension 63.5mm Mtg hole Ø 12.1mm
aluminium alloy body, Seal Repair Kit CP4518-CEJ - To suit Ø356.0mm Max / ‘PL’ Dimension 61.24mm
machined from high quality Bleed Screw Ø295.0mm Min x 32.0mm disc. Seal Repair Kit CP4518-JL
17Nm
die castings. Tightening - Monobloc aluminium alloy Bleed Screw
(12.5lbs/ft) 17Nm
- To suit Ø343.0 x 32.0mm Torque body, CNC machined from Tightening
(12.5lbs/ft)
discs. SPARE PARTS billet. Torque
- Differential bores, to control Pistons - Differential bores, to control SPARE PARTS
pad taper. Ø27.0mm CP5560-108 pad taper. Pistons
Ø31.8mm CP5560-109 Ø38.1mm CP4090-111
- Stainless Steel pistons. Ø38.1mm CP5560-110 - Stainless steel pistons. Ø44.5mm CP5830-115
- High temperature seals. Pad Retainer Bolt - High temperature seals. CP5788-106
- Hard anodised surface - Hard anodised surface Wear Plates
Retainer P/No. CP5555-126 x4
treatment. Ret/Bolt P/No. CP3596-112 treatment. Bleed Screw CP3880-1
- Stainless steel bridge pipe, CP5555-120 - Stainless steel bridge pipe, Fluid Pipe CP5788-6
Wear Plates
pad abutments & wear plates x4 pad abutments & wear plates
Bleed Screw CP3880-1
fitted. Fluid Pipe CP5560-26 fitted.
PART NUMBERS. PART NUMBERS.
- CP5560-32S0L RHT / - CP5788-2S0L RHT / -3S0L
-33S0L LHT / -34S0L RHL / LHT / -4S0L RHL / -5S0L LHL
-35S0L LHL CALIPER HANDING.
CALIPER HANDING. It is important to select the
It is important to select the correct ‘hand’ of caliper. See
correct ‘hand’ of caliper. See note on page 4 for guidance.
note on page 4 for guidance.

151.9 (5.98”) 139.3 (5.48”)

PAD INFORMATION PAD INFORMATION
- Pad Family = CP3894D46 - Pad Family = CP5788D48
73.5 (2.89”)

- Pad Area = 66.9cm² - Pad Area = 63.2m²

(2.41”)
61.4
- Pad Depth = 46.0mm - Pad Depth = 48.0mm
- Pad Thickness = 18.0mm - Pad Thickness = 20.0mm

INSTALLATION DRAWING 133.00 MAX 133.00 MAX

INSTALLATION DRAWING
71.00 MAX 78.50 MAX Ø22.00 C/BORE
51.50 MAX 46.50 MAX Ø1.25” BORE Ø1.50” BORE
(TRAILING)
‘PL’ DIMN

Ø1.0625” BORE
61.24

(LEADING) Ø22.00
43.00
63.5 ‘PL’ DIM’N

31.70

3.65

32.00
43.00

12.10 R1
116.26 ‘U’ DIMN

MAX DISC Ø3 53
MTG HOLE
R191.50 MAX

THICKNESS 55 .5
R172.50 MAX

.0 0
.5

MA EF
R167.50 MAX

77

XD FE
R1

R17
0.25x45° MIN
1.50 MAX

35.00 35.00 Ø12.21 9.8 ISC C

8 PA T
DIA IVE
107.35 ‘U’ DIM’N

MIN MIN 12.11 THW

R117.00 MAX

AY R
RAD MET AD
IUS ER I
U S

IUS
AD 98.42 MAX 37.30
RADIAL PROFILE YR
WA MAX
(SCALED FOR A ATH 62.09 MAX
0P
Ø343 DISC) 7.5
DISC & WHEEL C
L R17 21.91 14.42
MAX MAX

INLET PORT 180.00 MOUNTING CTRS

180.00 MOUNTING HOLE CTRS M10 X 1.0
BLEEDSCREW
TYPICAL MTG 42.00
INLET TIGHTENING
TIGHTENING OFFSET
M10x1.0
MAX

TORQUE
16.0

THD

TORQUE FOR 17Nm

GUIDANCE ONLY
175.20 MAX

M12 - 65Nm
OFFSET
186.47 MAX
196.0 MAX

186.47 MAX
175.20 MAX

42.00

M10 - 54Nm
168.91 MAX
149.62 MIN
127.45 MIN

127.45 MIN
121.46 MIN

121.46 MIN
OFFSET
44.00

97.12 MAX 13.12

MAX
121.30 MAX 45.20
MAX
RADIAL PROFILE TO
SUIT Ø355.0 DISC

www.apracing.com +44 (0)24 7663 9595

 Touring Car Brake Calipers 31

CUSTOMER NOTES
CP5789 - 4 Piston
TECHNICAL
SPECIFICATION
Ø38.1mm
Piston Sizes
Ø44.5mm
Disc Diameter Ø332.0mm
Disc Thickness 32.0mm
Weight No Pads 1.96Kg
Hydraulic Thread M10x1.0
GENERAL INFORMATION Mounting Type Radial
APPLICATIONS. Mtg centres 180.0mm
- World Touring Car . Mtg offset 42.0mm
FEATURES. Mtg hole Ø 12.2mm
‘PL’ Dimension 61.7mm
- Radial mount.
Seal Repair Kit CP4518-JL
- To suit Ø332.0 x 32.0mm Bleed Screw
wide disc in an 18” wheel. 17Nm
Tightening
- Monobloc aluminium alloy (12.5lbs/ft)
Torque
body, CNC machined from SPARE PARTS
billet. Pistons
- X-Beam bridge technology Ø38.1mm CP5990-107
increased caliper stiffness. Ø44.5mm CP5990-106
CP5789-105
- Differential bores, to control Wear Plates
x4
pad taper. Bleed Screw CP3880-1
- Stainless steel pistons. Fluid Pipe CP5789-6
- Optional ceramic insulation AVAILABLE OPTIONS
caps available. Piston Caps
- High temperature seals. Ø38.1mm CP6060-126
- Hard anodised surface Ø44.5mm CP5789-104
treatment.
- Stainless steel bridge pipe,
pad abutments & wear plates
fitted.
PART NUMBERS.
- CP5789-2S0LP RHT /
-3S0LP LHT / -4S0LP RHL /
-5S0LP LHL
CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance.

139.3 (5.48”)
PAD INFORMATION
- Pad Family = CP5788D48
- Pad Area = 63.2m²
(2.41”)
61.4

- Pad Depth = 48.0mm

- Pad Thickness = 20.0mm

INSTALLATION DRAWING
130.0 NOM 130.8 NOM

Ø44.5 Ø38.1
61.70 TO TOP OF
PAD MATERIAL
43.0

Ø DISC ROTATION
R1 33
68
.5 2
DIS DI
104.3

C SC
PA
TH
WA
YN
79.5 MAX 79.5 MAX OM
.
N

N
24.5° MI

15.5° MI

58.0 MAX

BLEED SCREW
R4 TIGHTENING
TORQUE
17Nm

R4
R175.5 MAX
R175.5 MAX

R4
42.0 NOM

R4 42.5 MIN
51.5 MAX
R115.8 MIN
R111.7 MIN
R108.0 MIN

Ø22.00

Ø12.2
RADIAL PROFILE
ON Ø332.0 DISC 180.0 CTRS NOM.

www.apracing.com +44 (0)24 7663 9595

32 Brake Calipers Pro 5000+
CP5020-21 & -22S0
2 Piston
TECHNICAL
SPECIFICATION
Piston Sizes Ø36.0mm
Piston Area 20.4cm²
Weight No Pads 1.5Kg
Hydraulic Thread M10x1.0
GENERAL INFORMATION Mounting Type Radial
APPLICATIONS. Mtg centres 130.0mm
Mtg offset 17.5mm
- Lightweight Single Seater. Mtg hole Ø 10.1mm
- F2 Rally Rear. ‘PL’ Dimension 41.5mm
- Race Rear. Seal Repair Kit CP4518-H
FEATURES. Bleed Screw
17Nm
- Radial mount. Tightening
(12.5lbs/ft)
- To suit Ø280.0mm x 9.6mm Torque
solid disc. SPARE PARTS
Pistons CP3177-102
- Two piece aluminium alloy Pad Retainer Split Pin
body. Retainer P/No. CP4100-120
- Machined from high quality CP5310-103
Wear Plates
die castings. x4
INTRODUCTION - Aluminium pistons. Bleed Screw CP3720-173
The PRO 5000+ Caliper and Disc Range has been specially - High temperature seals. Fluid Pipe CP5310-21
developed by AP Racing to bring a greater level of brake - Hard anodised surface PAD INFORMATION
performance well within the price range of the discerning team treatment. Pad Family CP2399D43
on a moderate budget. Pad Area 27.4cm²
- Split pin pad retainer.
- The range consists of nine caliper variants and ten different Pad Volume 34.73cm²
PART NUMBERS. Pad Thickness 14.4mm
discs, which cover 6, 4 & 2 piston calipers and ventilated and
- CP5020-20S0 Right hand. 70.15 (2.76”)
solid discs from Ø378mm to Ø280mm and 36mm down to
- CP5020-21S0 Left hand.
9.6mm thickness.
INSTALLATION.
- The nine caliper variants are based on radially mounted two
Install with bleed screws at
piece cast aluminium calipers and are fitted with 4lb anti-knockback

58.1 (2.28”)
the top (swap with blanking
springs (where applicable) and aluminium alloy pistons as
standard. plug as required) to enable a
- All caliper will run full depth pads. good bleed.
- The discs are available with a curved grooved face configuration
only, and benefit from AP Racing’s optimised disc mounting
design. BRAKE DISC INFORMATION
- The main objective of the range is to provide a high quality “off the
- Disc Description. Solid
shelf” brake system at a competitive price. - Part Number. CP5000-177G4 (Non Handed)
The range will be kept to the part numbers listed in this catalogue - Diameter. 280.0mm
and no variations will be available. - Thickness. 9.6mm
- Alternative strength anti-knockback springs and Stainless Steel - PCD. 176.8mm
pistons are available as aftermarket items, please refer to - Eye Diameter 192.0mm
- Inside Flange Dia. 159.0mm
AP Racing for details. - Flange Thickness. 4.8mm
- This section provides the basic installation dimensions for - Mounting Holes. 8
both the calipers and the discs, if further information is required - Mounting Hole Dia. 6.4mm
please contact AP Racing Technical Section. - Disc Weight. 2.5Kg
- Pad Depth. D44
NOTE.All dimensions in (mm) unless otherwise stated.

PRODUCT COMBINATIONS INSTALLATION DRAWING

The information below offers brief details / dimensions on the 32.75 MAX 32.75 MAX 98.30 92.50
21.43

range of calipers, discs, and brake pad families.

DIM’N ‘PL’

Caliper Dim’n (mm) Disc Options (mm)

41.50

Pad Part
Part Nos. Mtg
Offset PL No. Dia. Thick Example Part No.
RADIUS R1 MAX

Centers
RADIUS R2 MAX

56.50
EFFECTIVE RADIUS

2 Piston Calipers MAX

CP5020-20/21S0 130.0 17.5 41.5 CP2399D43 280.0 9.6 CP5000-177G4 53.0 35.0 MAX
’
RADIUS R3 MIN

MAX ‘N
RADIUS R4 MIN

4 Piston Calipers
DIM’N ‘U’

US
35.75 DI
CP5040- 356.0 36.0 CP5000-110/-111G8 MAX DI RA
180.0 42.0 73.6 CP3714D54 SC AY
20/21/22/23S4 330.0 36.0 CP5000-112/-113G8 CALIPER RADIAL O
/D W
TH
CP5040- 356.0 32.0 CP5000-218/-219G8 PROFILE PA
180.0 42.0 57.7 CP2279D50
30/31/32/33S4 330.0 32.0 CP5000-206/-207G8
CP5040- 330.0 28.0 CP5000-210/-210G8 DISC & WHEELLC DISC & WHEEL C
L
152.0 44.1 57.8 CP3215D50
2/3/4/5S4 315.0 28.0 CP5000-212/-213G8
CP5040- 295.0 25.4 CP5000-510/-511G8 130.0
130.0 43.2 53.0 CP3345D44 RADIAL PROFILE DIM’N MTG HOLE CENTRES
10/11/12/13S4 280.0 25.4 CP5000-312/-313G8
6 Piston Calipers Disc Ø 280.0 304.0
OFFSET

CP5060- 378.0/ R1 163.0 175.0

17.5

180.0 45.8 63.5 CP3894D54 36.0 CP5000-110/-11G8 R2 149.25 161.25

2/3/4/5S4 356.0
CP5060- 378.0/ R3 87.75 99.75
180.0 44.0 63.5 CP3894D51 32.0 CP5000-218/-219G8 R4 84.75 96.75
10/11/12/13S4 356.0
CP5260- 356.0 32.0 CP5000-218/-219G8 EFF RAD 117.56 129.56
210.0 42.0 63.5 CP3558D54 Ø10.10
2/3/4/5S4 378.0 32.0 CP5772-1030/-1031G8 MTG HOLE
CP5270- 378.0/ 36.0/
180.0 42.0 63.5 CP3558D54 CP5772-1032/-1033G8
2/3/4/5S4 356.0 32.0

www.apracing.com +44 (0)24 7663 9595

 Pro 5000+ Brake Calipers 33

CP5040-10/-11/-12/-13S4 CP5040-2/-3/-4/-5S4
4 Piston 4 Piston
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Sizes Ø38.1mm Ø38.1mm
Piston Sizes
Piston Area 45.6cm² Ø41.3mm
Weight No Pads 1.9Kg Piston Area 49.5cm²
Hydraulic Thread M10x1.0 Weight No Pads 2.6Kg
GENERAL INFORMATION Mounting Type Radial GENERAL INFORMATION Hydraulic Thread M10x1.0
APPLICATIONS. Mtg centres 130.0mm APPLICATIONS. Mounting Type Radial
Mtg offset 43.2mm Mtg centres 152.0mm
- Budget general use caliper. Mtg hole Ø 10.2mm - Budget general use caliper. Mtg offset 44.1mm
FEATURES. ‘PL’ Dimension 53.0mm FEATURES. Mtg hole Ø 12.2mm
- Radial Mount. Seal Repair Kit CP4518-JJ - Radial Mount. ‘PL’ Dimension 57.8mm
- Two piece aluminium alloy Bleed Screw - Two piece aluminium alloy Seal Repair Kit CP4518-JK
17Nm
body. Tightening body. Bleed Screw
(12.5lbs/ft) 17Nm
- Aluminium alloy pistons. Torque - Differential bores to reduce Tightening
(12.5lbs/ft)
SPARE PARTS Torque
- High temperature seals. pad taper.
Pistons CP3215-113 SPARE PARTS
- Hard anodised surface AKB Spring kit. - CP6518-4LBLL
- Aluminium alloy pistons. Ø38.1 Pistons CP3434-116
treatment. Pad Retainer Bolt - High temperature seals. Ø41.3 Pistons CP3584-101
- 4lb anti-knockback springs Retainer P/No. CP5100-116 - Hard anodised surface AKB Spring kit. - CP6518-4LBLL
fitted. Ret/Bolt P/No. CP5100-125 treatment. Pad Retainer Bolt
- Stainless steel bridge pipes, CP5100-210 - 4lb anti-knockback springs Retainer P/No. CP5200-124
Wear Plates
pad abutments & wear plates x 2 / -211 x 2 fitted. Ret/Bolt P/No. CP5100-120
Bleed Screw CP3720-173 CP5100-306
fitted. Fluid Pipe CP5000-54
- Stainless steel bridge pipes, Wear Plates
x 2 / -307 x 2
PART NUMBERS. PAD INFORMATION pad abutments & wear plates Bleed Screw CP3720-173
- CP5040-10S4 RHT. Pad Family CP3345D44 fitted. Fluid Pipe CP5000-44
- CP5040-11S4 LHT. Pad Area 43.4cm² PART NUMBERS. PAD INFORMATION
- CP5040-12S4 RHL. Pad Volume 50.1cm² - CP5040-2S4 RHT. Pad Family CP3215D50
- CP5040-13S4 LHL Pad Thickness 16.0mm - CP5040-3S4 LHT. Pad Area 57.4cm²
CALIPER HANDING. 113.47 (5.20”) - CP5040-4S4 RHL. Pad Volume 70.44cm²
It is important to select the - CP5040-5S4 LHL Pad Thickness 16.8mm
52.10 (2.05”)

correct ‘hand’ of caliper. See CALIPER HANDING. 132.27 (5.20”)

note on page 4 for guidance It is important to select the

(2.19”)
55.75
correct ‘hand’ of caliper. See
note on page 4 for guidance.

VENTILATED BRAKE DISC INFORMATION VENTILATED BRAKE DISC INFORMATION

- Part Number. CP5000-312/-313CG8 CP5000-510/-511CG8 - Part Number. CP5000-210/-211CG8 CP5000-212/-213CG8
- Diameter. Ø280.0mm Ø295.0mm - Diameter. Ø330.0mm Ø315.0mm
-PAD INFORMATION
Thickness. 25.4mm 25.4mm - Thickness. 28.0mm 28.0mm
-- PCD.
Pad Family = CP3894D46 Ø177.8mm Ø177.8mm - PCD. Ø203.2mm Ø177.8mm
- Eye Diameter Ø192.0mm Ø204.0mm - Eye Diameter Ø227.4mm Ø210.0mm
- Pad Area = 66.9cm²
- Inside Flange Dia. Ø159.3mm Ø164.0mm - Inside Flange Dia. Ø190.0mm Ø164.0mm
-- Flange
Pad Depth = 46.0mm
Thickness. 4.9mm 5.6mm - Flange Thickness. 5.1mm 5.9mm
-- Mounting
Pad Thickness
Holes. = 18.0mm 8 12 - Mounting Holes. 12 12
- Mounting Hole Dia. 6.4mm 6.4mm - Mounting Hole Dia. 6.4mm 6.4mm
- Airgap. 12.7mm 9.3mm - Airgap. 15.25mm 15.25mm
- No of Vanes. 30 24 - No of Vanes. 36 36
- Disc Weight. 3.8Kg 4.7Kg - Disc Weight. 5.0Kg 5.05Kg
- Pad Depth. D44 D44 - Pad Depth. D50 D50

INSTALLATION DRAWING INSTALLATION DRAWING

123.36 MIN TO REMOVE PADS
TOP OF DISC &
PAD MATERIAL

118.40 MIN TO REMOVE PADS 67.0MAX

69.7 MAX 69.7 MAX
65.0 MAX 63.5 MAX 135.5 135.5
117.00 117.00 42.5 42.5
42.0 MAX 42.0 MAX TOP OF MAX MAX
DISC & PAD
MATERIAL
25.30

30.39
DIM'N 'PL'
53.05

57.8
RADIUS 4 MAX
RADIUS 3 MAX
RADIUS 5 MAX

RADIUS 3 MAX
RADIUS 4 MAX

EFFECTIVE RADIUS

DISC ROTATION 43.45

45.0 MIN
EFFECTIVE RADIUS

DIS
C MAX DISC ROTATION
RADIUS 2 MIN
RADIUS 1 MIN

RADIUS 2 MIN

O
RADIUS 1 MIN

UT DISC & CALIPER

SID TOLERANCES
ED .5
DIM'N 'U'

DIS
94.43

IA TO BE SUCH THAT DISC C 67

150 M
ET IS CENTRAL OU S1
.0’ E TSID DIU
R TO CALIPER TO WITHIN ED RA
±0.5mm RADIAL PROFILE IAM AY
Ø330 x 28mm ETE W
RADIAL PROFILE R TH
DISC &
Ø295 x 25.4mm PA
WHEEL C C
L WHEEL & DIS
DISC C
L
130.0 MTG HOLE CENTRES
Ø10.25 Ø12.25 /
RADIAL PROFILE DIM’N 10.15 INLET PORT M10 x 1.0 x 9MIN THR'D RADIAL PROFILE DIM’N 12.15
MTG HOLE CRS - 152.0
MTG HOLES MTG HOLE
OFFSET

Disc Ø 280.0 295.0 Disc Ø 315.0 330.0 INLET PORT M10 x 1.0 x 9.0 MIN THR'D
43.2

RAD 1 89.5 97.0 RAD 1 103.3 110.8

RAD 2 91.5 99.0 RAD 2 106.3 113.8
RAD 3 134.25 141.75 RAD 3 157.5 164.8
OFFSET
44.1

RAD 4 140.5 148.0 RAD 4 178.6 184.4

RAD 5 158.25 165.75 EFF RAD 132.1 139.3
EFF RAD 114.65 122.15
PAD RETAINING BOLTS
SHOULD BE TIGHTENED PAD RETAINING BOLTS
TO A TORQUE OF 13.1Nm SHOULD BE TIGHTENED
(9.70 Lbs/ft) TO A TORQUE OF 13.1Nm
(9.7 Lbs ft)

www.apracing.com +44 (0)24 7663 9595

34 Brake Calipers Pro 5000+
CP5040-30/-31/-32/-33S4 CP5040-20/-21/-22/-23S4
4 Piston 4 Piston
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø38.1mm Ø38.1mm
Piston Sizes Piston Sizes
Ø44.5mm Ø44.5mm
Piston Area 53.8cm² Piston Area 53.8cm²
Weight No Pads 2.4Kg Weight No Pads 3.3Kg
Hydraulic Thread M10x1.0 Hydraulic Thread 3/8”x24UNF
GENERAL INFORMATION Mounting Type Radial
GENERAL INFORMATION Mounting Type Radial
APPLICATIONS. Mtg centres 180.0mm APPLICATIONS. Mtg centres 180.0mm
- Budget general use caliper. Mtg offset 42.0mm - Budget general use caliper. Mtg offset 42.0mm
FEATURES. Mtg hole Ø 12.15mm FEATURES. Mtg hole Ø 12.15mm
- Radial Mount. ‘PL’ Dimension 57.74mm - Radial Mount. ‘PL’ Dimension 73.6mm
- Two piece aluminium alloy Seal Repair Kit CP4518-JL - Two piece aluminium alloy Seal Repair Kit CP4518-JL
Bleed Screw Bleed Screw
body. Tightening
17Nm body. Tightening
17Nm
- Differential bores to reduce (12.5lbs/ft) - Differential bores to reduce (12.5lbs/ft)
Torque Torque
pad taper. SPARE PARTS pad taper. SPARE PARTS
- Aluminium alloy pistons. Ø38.1 Pistons CP3636-107 - Aluminium alloy pistons. Ø38.1 Pistons CP5000-109
- High temperature seals. Ø44.5 Pistons CP3394-110 - High temperature seals. Ø44.5 Pistons CP3714-111
- Hard anodised surface AKB Spring kit. - CP6518-4LBLL - Hard anodised surface AKB Spring kit. - CP6518-4LBLL
treatment. Pad Retainer H/Piece treatment. Pad Retainer H/Piece
Retainer P/No. CP3449-108 Retainer P/No. CP3714-190
- 4lb anti-knockback springs Ret/Bolt P/No. CP3439-111
- 4lb anti-knockback springs Ret/Bolt P/No. CP3714-117
fitted. Wear Plates - CP3799-110 x 1 / fitted. Wear Plates - CP3714-153x 4
- Stainless steel bridge pipes, -111 x 1 / CP3846-101 x 2 - Stainless steel bridge pipes, Bleed Screw CP3720-173
pad abutments & wear plates Bleed Screw CP3720-173 pad abutments & wear plates Fluid Pipe CP3799-6
fitted. Fluid Pipe CP3799-6 fitted. PAD INFORMATION
PART NUMBERS. PAD INFORMATION PART NUMBERS. Pad Family CP3714D54
- CP5040-30S4 RHT. Pad Family CP2279D50 - CP5040-20S4 RHT. Pad Area 66.02cm²
- CP5040-31S4 LHT. Pad Area 57.4cm² - CP5040-21S4 LHT. Pad Volume 132.03cm²
- CP5040-32S4 RHL. Pad Volume 91.65cm² - CP5040-22S4 RHL. Pad Thickness 25.0mm
Pad Thickness 20.5mm 130.0 (5.11”)
- CP5040-33S4 LHL 131.3 (5.17”)
- CP5040-23S4 LHL
CALIPER HANDING. CALIPER HANDING.

76.3 (3.00”)
It is important to select the It is important to select the
(2.02”)
54.1

correct ‘hand’ of caliper. See correct ‘hand’ of caliper. See

note on page 4 for guidance. note on page 4 for guidance.

VENTILATED BRAKE DISC INFORMATION VENTILATED BRAKE DISC INFORMATION

- Part Number. CP5000-206/-207CG8 CP5000-218/-219CG8 - Part Number. CP5000-110/-111CG8 CP5000-112/-113CG8
- Diameter. Ø330.0mm Ø356.0mm - Diameter. Ø356.0mm Ø330.mm
-PAD INFORMATION
Thickness. 32.0mm 32.0mm - Thickness. 36.0mm 36.0mm
-- PCD.
Pad Family = CP3894D46 Ø203.2mm Ø228.6mm - PCD. Ø228.6mm Ø203.2mm
-- Eye
PadDiameter
Area = 66.9cm² Ø227.4mm Ø250.4mm - Eye Diameter Ø244.6mm Ø219.4mm
- Inside Flange Dia. Ø190.0mm Ø214.0mm - Inside Flange Dia. Ø214.0mm Ø190.0mm
-- Flange
Pad Depth = 46.0mm
Thickness. 6.6mm 5.3mm - Flange Thickness. 6.6mm 6.6mm
-- Mounting
Pad Thickness
Holes. = 18.0mm 12 12 - Mounting Holes. 12 12
- Mounting Hole Dia. 6.4mm 6.4mm - Mounting Hole Dia. 6.4mm 6.4mm
- Airgap. 15.5mm 19.5mm - Airgap. 19.5mm 19.5mm
- No of Vanes. 48 48 - No of Vanes. 48 48
- Disc Weight. 6.7Kg 6.5Kg - Disc Weight. 7.7Kg 7.2Kg
- Pad Depth. D51 D51 - Pad Depth. D55 D55

INSTALLATION DRAWING 86.0 MAX

INSTALLATION DRAWING
101.0 MIN 90.00 MAX 90.00 MAX
77.50 MAX 79.50 MAX 131.0 MAX 123.0
W1 MAX TO REMOVE 84.00 MAX 84.00 MAX 138 MAX 137 MAX.
W2 MAX
Ø38.1 (1.50”) Ø44.5 (1.75”) PADS 65.00 MAX 57.00 MAX
LEADING TRAILING 50.50 MAX 50.50 MAX
‘PL’ DIM’N
57.74
45.67

73.60 ‘PL' DIM’N

54.00

40.90

0
.5
R7 MAX
R1 MAX

R8.00 80
R4 MAX

DIRECTION OF R1
R2 MAX

R6 MAX

DISC ROTATION S
IUS

R5 MAX
R3 MAX

53.0 MAX 53.0 MAX D IU

R3 MAX

IS D DISC ROTATION
D

C
RA 44.00 44.00
‘U’ DIM’N
R4 MIN

RA

D
IA Y MIN MIN Ø24.00 C IUS
DIS RAD
R2 MIN

M A US
IVE

MOUNTING
R6 MIN

W DI 0.30 AY
R5 MIN

BLEED SCREW ET
TH
R1 MIN

ER RA R18 HW
T

104.2

MAX TIGHTENING PA
EC

E T
TORQUE 17Nm. CHOICE OF BOLTED C TIV PA
EFF

IS RADIAL PROFILE C
‘H’ PIECE OR QUICK RELEASE D FE
SPRING CLIP. BOTH SUPPLIED Ø356 x 36mm EF
FITTED DISC &
WHEEL CL Ø355.6 DISC & WHEEL
INLET PORT
M10x1.0 THREAD
180.00 MOUNTING HOLE CENTRES
MTG CENTERS 180.0
Ø22.00
RADIAL PROFILE DIM’N Ø24.00 INLET PORT 3/8" x 24UNF Ø12.15
RADIAL PROFILE DIM’N C/BORE Disc Ø 330.0 356.0 C/BORE MTG.
Ø12.15 HOLE
Disc Ø 330.0 356.0 MTG HOLE R1 107.0 119.0
W1 37.0 43.0 R2 109.5 121.5
W2 40.0 44.0 R3 165.5 177.5
OFFSET
OFFSET

42.0
42.00

R1 187.0 196.5 R4 173.0 185.0

R2 170.0 182.5 R5 175.5 187.9
R3 152.0 164.0 R6 182.5 195.5
R4 134.0 146.0 R7 188.3 200.1 PAD RETAINING
R5 113.5 126.5 EFF RAD 137.1 150.3 BOLT MAX.
PAD RETAINER
R6 110.5 123.0 BOLT MAX
‘U’ DIM’N 91.5 104.2
TORQUE
TORQUE 15Nm (11lbft) 20NM (15 LbFt)
EFF RAD 141.5 154.0

www.apracing.com +44 (0)24 7663 9595

 Pro 5000+ Brake Calipers 35

CP5060-2/-3/-4/-5S4 CP5060-10/-11/-12/-13S4
6 Piston 6 Piston
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Ø27.0mm
Piston Sizes Ø31.8mm Piston Sizes Ø31.8mm
Ø38.1mm Ø38.1mm
Piston Area 50.1cm² Piston Area 50.1cm²
Weight No Pads 2.9Kg Weight No Pads 2.8Kg
GENERAL INFORMATION Hydraulic Thread M10x1.0
GENERAL INFORMATION Hydraulic Thread M10x1.0
APPLICATIONS. Mounting Type Radial APPLICATIONS. Mounting Type Radial
- Budget general use caliper. Mtg centres 180.0mm - Budget general use caliper. Mtg centres 180.0mm
FEATURES. Mtg offset 45.8mm FEATURES. Mtg offset 44.0mm
- Radial Mount. Mtg hole Ø 12.2mm - Radial Mount. Mtg hole Ø 12.2mm
- Two piece aluminium alloy ‘PL’ Dimension 63.5mm - Two piece aluminium alloy ‘PL’ Dimension 63.5mm
Seal Repair Kit CP4518-CEJ Seal Repair Kit CP4518-CEJ
body. Bleed Screw body. Bleed Screw
- To suit Ø378.0 or Ø356.0 x 17Nm - To suit Ø378.0, Ø366.0 or 17Nm
Tightening Tightening
36.0mm discs. (12.5lbs/ft) Ø356.0 x 32.0mm discs. (12.5lbs/ft)
Torque Torque
- Differential bores to reduce SPARE PARTS - Differential bores to reduce SPARE PARTS
pad taper. Ø27.0 Pistons CP4910-156 pad taper. Ø27.0 Pistons CP4910-156
- Aluminium alloy pistons. Ø31.8 Pistons CP4910-155 - Aluminium alloy pistons. Ø31.8 Pistons CP4910-155
- High temperature seals. Ø38.1 Pistons CP4910-154 - High temperature seals. Ø38.1 Pistons CP4910-154
AKB Spring kit. - CP6518-4LBSSL AKB Spring kit. - CP6518-4LBSSL
- Hard anodised surface Pad Retainer Bolt
- Hard anodised surface Pad Retainer Bolt
treatment. Retainer P/No. CP5555-109 treatment. Retainer P/No. CP5555-126
- 4lb anti-knockback springs Ret/Bolt P/No. CP3894-139 - 4lb anti-knockback springs Ret/Bolt P/No. CP3596-112
fitted. Wear Plates - CP5555-120 x 4 fitted. Wear Plates - CP5555-120 x 4
- Stainless steel bridge pipes, Bleed Screw CP3880-1 - Stainless steel bridge pipes, Bleed Screw CP3880-1
pad abutments & wear plates Fluid Pipe CP5500-12 pad abutments & wear plates Fluid Pipe CP5500-6
fitted. PAD INFORMATION fitted. PAD INFORMATION
Pad Family CP3894D54 Pad Family CP3894D51
PART NUMBERS. PART NUMBERS.
Pad Area 76.3cm² Pad Area 73.7cm²
- CP5060-2S4 RHT / -3S4 - CP5060-10S4 RHT / -11S4
Pad Volume 100.1cm² Pad Volume 95.5cm²
LHT / -4S4 RHL / -5S4 LHL. Pad Thickness 18.0mm LHT / -12S4 RHL / -13S4 LHL. Pad Thickness 18.0mm
CALIPER HANDING. 151.9 (5.98”) CALIPER HANDING. 151.9 (5.98”)

It is important to select the It is important to select the

80.6 (3.17”)

correct ‘hand’ of caliper. See correct ‘hand’ of caliper. See

(3.17”)
80.6
note on page 4 for guidance. note on page 4 for guidance.

VENTILATED BRAKE DISC INFORMATION VENTILATED BRAKE DISC INFORMATION

- Part Number. CP5000-110/-111CG8 CP5772-2068/9CG8 - Part Number. CP5000-218/9CG8 CP3700-1036/7G8 CP5772-1030/1CG8
- Diameter. Ø356.0mm Ø378.0mm - Diameter. Ø356.0mm Ø366.0mm Ø378.0mm
- Thickness. 36.0mm 36.0mm -PAD INFORMATION32.0mm
Thickness. 32.0mm 32.0mm
- PCD. Ø228.6mm Ø240.0mm -- PCD. Ø228.6mm Ø240.0mm Ø240.0mm
Pad Family = CP3894D46
- Eye Diameter Ø244.6mm Ø264.0mm -- Eye Diameter Ø250.4mm Ø268.0mm Ø266.8mm
Pad Area = 66.9cm² Ø214.0mm Ø224.0mm Ø215.0mm
- Inside Flange Dia. Ø214.0mm Ø216.0mm - Inside Flange Dia.
- Flange Thickness. 6.6mm 5.6mm -- Flange
Pad Depth = 46.0mm 5.3mm
Thickness. 5.8mm 5.6mm
- Mounting Holes. 12 12 (Floating) -- Mounting
Pad Thickness
Holes. = 18.0mm 12 12 12 (Floating)
- Mounting Hole Dia. 6.4mm Bobbin CP2494-589MJ - Mounting Hole Dia. 6.4mm 6.45mm Bobbin CP2494-589
- Airgap. 19.5mm 19.5mm - Airgap. 19.5mm 19.5mm 20.0mm
- No of Vanes. 48 72 - No of Vanes. 48 48 72
- Disc Weight. 7.7Kg 8.8Kg - Disc Weight. 6.5Kg 6.4Kg 7.2Kg
- Pad Depth. D55 D55 - Pad Depth. D51 D51 D55

INSTALLATION DRAWING 72.4 MAX 80.1 MAX

INSTALLATION DRAWING 71.0 MAX 78.25 MAX
97.00 MIN. 141 MAX 141 MAX 97.00 MIN. 141 MAX 141 MAX
TO REMOVE 53.5 MAX 75.8 MAX TO REMOVE 50.9 MAX 74.0 MAX
PADS 49.8 MAX PADS 47.9 MAX
DIMN 'PL' 63.5

DIMN 'PL' 63.5

43.00

43.00
200.2 MAX
200.2 MAX
193.9 MAX

193.9 MAX
178.9 MAX

178.9 MAX

DIRECTION OF DIRECTION OF
DISC ROTATION DISC ROTATION
126.15 MIN

36.5 44.0 36.1 44.0

6

6
123.2 MIN

126.15 MIN

2.

123.2 MIN

2.
121.25 MIN
121.25 MIN

OFFSET D OFFSET D
15

MAX
15

MAX PAD PROFILE PAD PROFILE

RA 4.50 RA 4.50
S

S
115.0

AY
115.0

AY
IU

IU

54.3 MAX MAX 54.3 MAX

D

HW MAX
D

W
TH
RA

RA

T
PA PA
E

C C
TIV

TIV

DIS DIS
C

57.0 MAX 0 57.0 MAX 0

1.5 1.5
FE

FE

19 19
EF

EF

RADIAL PROFILE RADIAL PROFILE

Ø356 x 36mm Ø356 x 32mm
DISC & WHEEL DISC AND WHEEL C
L DISC & WHEEL DISC AND WHEEL C
L

180.00 MOUNTING HOLE CENTRES 180.00 MOUNTING HOLE CENTRES

Ø22.00 Ø12.20 Ø22.00 Ø12.20
INLET PORT M10 x 1.0 THREAD MTG HOLE INLET PORT M10 x 1.0 THREAD MTG HOLE
C/BORE C/BORE
OFFSET

OFFSET
44.0

44.0

DISC C
L DISC C
L

PAD RETAINING BOLTS SHOULD PAD RETAINING BOLTS SHOULD

BE TIGHTENED TO A TORQUE BE TIGHTENED TO A TORQUE
OF 15Nm (11 Lbs Ft). OF 15Nm (11 Lbs Ft).
IF POSSIBLE IT IS RECOMMENDED IF POSSIBLE IT IS RECOMMENDED
THAT THESE BOLTS ARE LOCKWIRED THAT THESE BOLTS ARE LOCKWIRED
IN POSITION. IN POSITION.

www.apracing.com +44 (0)24 7663 9595

36 Brake Calipers Pro 5000+
CP5260-2/-3/-4/-5S4 CP5270-2/-3/-4/-5S4
6 Piston New
Product
6 Piston
TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Ø27.0mm
Piston Sizes Ø31.8mm Piston Sizes Ø31.8mm
Ø38.1mm Ø38.1mm
Piston Area 50.1cm² Piston Area 50.1cm²
Weight No Pads 3.4Kg Weight No Pads 3.4Kg
GENERAL INFORMATION Hydraulic Thread M10x1.0
GENERAL INFORMATION Hydraulic Thread M10x1.0
APPLICATIONS. Mounting Type Radial APPLICATIONS. Mounting Type Radial
- Budget general use caliper. Mtg centres 210.0mm - Budget general use caliper. Mtg centres 180.0mm
FEATURES. Mtg offset 42.0mm FEATURES. Mtg offset 42.0mm
- Radial Mount. Mtg hole Ø 12.15mm - Radial Mount. Mtg hole Ø 12.2mm
- Designed to suit Ø378.0mm ‘PL’ Dimension 63.5mm - Two piece aluminium alloy ‘PL’ Dimension 63.5mm
Seal Repair Kit CP4518-CEJ Seal Repair Kit CP4518-CEJ
disc. Bleed Screw body. Bleed Screw
- Two piece aluminium alloy 17Nm - To suit Ø378.0 or Ø356.0 x 17Nm
Tightening Tightening
body. (12.5lbs/ft) 36.0 or 32.0mm discs. (12.5lbs/ft)
Torque Torque
- Differential bores to reduce SPARE PARTS - Differential bores to reduce SPARE PARTS
pad taper. Ø27.0 Pistons CP5260-109 pad taper. Ø27.0 Pistons CP5260-109
- Aluminium alloy pistons. Ø31.8 Pistons CP5260-110 - Stainless Steel pistons. Ø31.8 Pistons CP5260-110
- High temperature seals. Ø38.1 Pistons CP5260-111 - High temperature seals. Ø38.1 Pistons CP5260-111
AKB Spring kit. - CP6518-4LBSSL Pad Retainer H/Piece
- Hard anodised surface Pad Retainer ‘H’ Piece
- Hard anodised surface Retainer P/No. CP4578-101
treatment. Retainer P/No. CP5260-108 treatment. Ret/Bolt P/No. CP3714-117
- 4lb anti-knockback springs Ret/Bolt P/No. CP3715-117 - 7lb anti-knockback springs Wear Plates - CP5260-106 x 2
fitted. Wear Plates - CP5260-106 x 4 fitted. CP5270-104 x 1 & -105 x 1.
- Stainless steel bridge pipes, Bleed Screw CP3880-1 - Stainless steel bridge pipes, Bleed Screw CP3880-1
pad abutments & wear plates Fluid Pipe CP5260-6 pad abutments & wear plates Fluid Pipe CP5500-12
fitted. PAD INFORMATION fitted. PAD INFORMATION
Pad Family CP3558D54 Pad Family CP3558D54
PART NUMBERS. - Replaces CP4340 family.
Pad Area 77.5cm² Pad Area 77.5cm²
- CP5260-2S4 RHT / -3S4 PART NUMBERS.
Pad Volume 155.0cm² Pad Volume 155.0cm²
LHT. / -4S4 RHL / -5S4 LHL. Pad Thickness 25.0mm - CP5270-2S7L RHT / -3S7L Pad Thickness 25.0mm
CALIPER HANDING. 151.9 (5.98”) LHT / -4S7L RHL / -5S7L LHL. 151.9 (5.98”)

It is important to select the CALIPER HANDING.

80.6 (3.17”)
80.6 (3.17”)

correct ‘hand’ of caliper. See It is important to select the

note on page 4 for guidance. correct ‘hand’ of caliper. See
note on page 4 for guidance.

BRAKE DISC INFORMATION VENTILATED BRAKE DISC INFORMATION

- Part Number. CP5000-218/-219CG8 CP5772-1030/-1031CG8 - Part Number. CP5000-218/-219CG8 CP5772-1032/-1033CG8
- Diameter. Ø356.0mm Ø378.0mm - Diameter. Ø356.0mm Ø378.0mm
- Thickness. 32.0mm 32.0mm - Thickness. 32.0mm 36.0mm
- PCD. Ø228.6mm Ø240.0mm - PCD. Ø228.6mm Ø240.0mm
- Eye Diameter Ø250.4mm Ø266.8mm - Eye Diameter Ø250.4mm Ø266.0mm
- Inside Flange Dia. Ø214.0mm Ø215.0mm - Inside Flange Dia. Ø214.0mm Ø215.0mm
- Flange Thickness. 5.3mm 5.6mm - Flange Thickness. 5.3mm 5.6mm
- Mounting Holes. 12 12 (Floating) - Mounting Holes. 12 12 (Floating)
- Mounting Hole Dia. 6.4mm Bobbin CP2494-589MJ - Mounting Hole Dia. 6.4mm Bobbin CP2494-589MJ
- Airgap. 19.5mm 20.0mm - Airgap. 19.5mm 20.0mm
- No of Vanes. 48 72 - No of Vanes. 48 72
- Disc Weight. 6.5Kg 7.2Kg - Disc Weight. 6.5Kg 7.4Kg
- Pad Depth. D51 D55 - Pad Depth. D51 D55

INSTALLATION DRAWING INSTALLATION DRAWING 140.5 140.5

87.5 MAX 140.50 140.50 116.0 89.5 MAX
116.0 83.0 MAX 84.0 MAX TO 85.0 MAX 86.0 MAX Ø31.8 BORE
Ø31.8 (1.25”) BORE Ø38.1 BORE
TO REMOVE 55.0 MAX 54.0 MAX REMOVE 57.0 MAX 56.0 MAX TRAILING
Ø27.0 (1.0625”) BORE Ø38.1 (1.50”) BORE Ø27.0 BORE
LEADING TRAILING LEADING
63.5 ‘PL’ DIM’N

DIM’N ‘PL’
63.5
40.00

40.00
R8 MAX
R8 MAX
R7 MAX

42.00
R7 MAX

R6 MAX

42.00 Ø24.0 PAD PROFILE

R6 MAX

4.5 MAX
Ø25.0 PAD PROFILE US
R5 MAX

REF
R5 MAX

REF 4.5 MAX DI DIRECTION OF

RA
R4 MIN

R4 MIN

AY DISC ROTATION
DIM’N ‘U’
R3 MIN
R3 MIN

S
R1 MIN
R2 MIN

R1 MIN

46.0 MAX
DIM’N ‘U’

IU 65.0 MAX
R2 MIN

W
W7 MAX 65.0 MAX D TH
DISC ROTATION RA PA
E SC EFFECTIVE RADIUS
TIV DI
FEC .50 R191.50 DISC
EF 19 1 PATHWAY RADIUS
RADIAL PROFILE R
Ø378 DISC
AND WHEEL C
L DISC & WHEEL C
L
Ø378 DISC AND WHEEL C
L Ø378 DISC AND WHEEL C
L
180.00±0.05 MOUNTING HOLE CTRS
RADIAL PROFILE DIM’N 210.0 MOUNTING HOLE CTRS RADIAL PROFILE DIM’N INLET PORT M10x1.0 Ø12.15±0.05
INLET PORT M10x1.0 THD Ø22.00
Disc Ø 356.0 378.0 Ø22.00
C/BORE
Disc Ø 356.0 378.0 C/BORE MTG HOLES
Ø12.15
R1 121.5 132.0 MTG HOLE R1 121.5 132.0
R2 123.0 134.0 R2 123.0 134.0 PAD RETAINING
42.00±0.05

BOLTS SHOULD
OFFSET

R3 126.0 137.0 R3 126.0 137.0

OFFSET
42.00

BE TIGHTENED
R4 140.0 151.0 R4 140.0 151.0 TO A TORQUE
OF 15Nm
R5 161.0 172.0 R5 161.0 172.0 (11 Lbs Ft).
IF POSSIBLE IT IS
R6 176.5 187.0 PAD RETAINING BOLTS R6 176.5 187.0 RECOMMENDED
SHOULD BE TIGHTENED
R7 177.5 188.5 TO A TORQUE OF 27Nm R7 177.5 188.5 THAT THESE BOLTS
ARE LOCKWIRED
(20lbft). IF POSSIBLE IT IS
R8 201.5 210.5 RECOMMENDED THAT R8 201.5 210.5 IN POSITION.

EFF RAD 153.0 163.5 THESE BOLTS BE

LOCKWIRED IN POSITION.
EFF RAD 153.0 163.5
‘U’ DIM’N 114.5 125.5 ‘U’ DIM’N 114.5 125.5

www.apracing.com +44 (0)24 7663 9595

 Historic Brake Calipers 37

AP Racing’s “Historic” Range of calipers are detailed below, are now “Classic” in status, such as CP2383 and CP2561 and have
been reintroduced due to the popularity of various historic racing categories. The “Historic” Range of calipers are usually made
to order, however some calipers are stock items, please check availability with AP Racing first. Spare part details for the calipers
detailed can be found on page 7 to 12.

CP2382 and CP2383 CP2561 CP2270

2 Piston Calipers. 2 Piston Caliper. 4 Piston Caliper.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Piston Piston Piston
Ø50.8mm Ø38.1mm Ø41.3mm
Sizes Sizes Sizes
Disc Dia. Disc Dia. Ø278.0mm Disc Dia.
Max Ø266.7mm Disc Thickness Max Ø302.0mm
APPLICATIONS. Min Ø254.0mm APPLICATIONS. Max 25.4mm Min Ø260.0mm
- CP2382, Escort Disc Thickness - Historic Formula Min 22.8mm APPLICATIONS. Disc
28.0mm
Rear, Grp 4 Rally CP2382 20.7mm One, balance Weight - Rally. Thickness
1.17Kg
CP2383 (No Pads) Weight
Vented Disc. Max 11.2mm braking from 1977 Hydraulic
- Sports GT. (No Pads)
2.7Kg
M10x1.0 - Saloons
- CP2383, Escort Min 9.7mm - 1985. Thread Hydraulic 3/8”x24
Rear, Grp 4 rally Weight
1.8Kg FEATURES. Mounting
Radial
FEATURES. Thread UNF
(No Pads) Type - Closed back Mounting
Solid Disc. - Lug mount. Mounting Type
Blank Lug
Hydraulic 3/8”x24
FEATURES. Thread UNF - Balance braking centres
88.9mm aluminium alloy Mounting 76.2 /
- Lug mount. Mounting (2 Calipers per Mounting body. centres 94.0mm
Lug 50.0mm
- Two piece cast Type disc). offset - Blank lug mount. Mounting 33.3 /
Mounting Mtg hole Ø 9.6mm offset 42.4mm
aluminium alloy 88.9mm - Two piece cast - Aluminium alloy
centres ‘PL’ Mtg hole Ø N/A
body. aluminium alloy 26.0mm pistons.
Mounting offset Dimension ‘PL’ 66.3 /
- Aluminium alloy CP2382 29.7mm body. Seal
CP4518-J
- Hard anodised Dimension 85.6mm
CP2383 24.9mm Repair Kit surface treatment. Seal CP4518-
pistons. - Hard anodised
Mtg hole Ø 11.27mm Bleed Repair Kit KK
- Hard anodised ‘PL’ surface treatment. Screw 17Nm
PART NUMBERS. Bleed
54.1mm - Right Hand.
surface treatment. Dimension PART NUMBERS. Tightening (12.5lbs/ft) Screw 17Nm
PART NUMBERS. Seal
CP4518-N - CP2561-3S4. Torque CP2270-144S4QR Tightening (12.5lbs/ft)
Repair Kit Pad Family CP2554 Torque
- Vented Disc. - Left Hand.
Bleed CP2270
CP2382-12E4 CP2270-145S4QR Pad Family
Screw 17Nm D46
(RH) & -13E4 (LH). Tightening (12.5lbs/ft)
- Soild Disc Torque
CP2372
CP2383-12E4 Pad Family
D52
(RH) & -13E4 (LH).

CP2271 CP2279 CP2361

4 Piston Caliper. 4 Piston Caliper. 4 Piston Caliper.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Piston Piston Piston
Ø38.1mm Ø44.5mm Ø38.1mm
Sizes Sizes Sizes
Disc Dia. Disc Dia. Disc Dia.
Max Ø302.0mm Max Ø330.0mm Max Ø267.0mm
Min Ø260.0mm Min Ø260.0mm Min Ø248.0mm
Disc Disc Disc
28.0mm 28.0mm 20.7mm
APPLICATIONS. Thickness APPLICATIONS. Thickness APPLICATIONS. Thickness
Weight Weight Weight
- Rally. (No Pads)
2.7Kg - Sports GT. (No Pads)
3.4Kg - Rally. (No Pads)
2.0Kg
- Sports GT. Hydraulic 3/8”x24 FEATURES. Hydraulic 3/8”x24 - Sports GT. Hydraulic 3/8”x24
- Saloons Thread UNF - Closed back Thread UNF FEATURES. Thread UNF
FEATURES. Mounting aluminium alloy Mounting - Closed back Mounting
Blank Lug Blank Lug Blank Lug
Type Type Type
- Closed back Mounting 76.2 / body. Mounting centres aluminium alloy Mounting 76.2 /
aluminium alloy centres 94.0mm - Blank lug mount. Max 88.9mm body. centres 94.0mm
body. Mounting 33.3 / - Aluminium alloy Min 80.3mm - Blank lug mount Mounting 28.7 /
offset 42.4mm Mounting offset offset 31.2mm
- Blank lug mount. Mtg hole Ø N/A
pistons. Max 50.0mm
to suit 13” wheels. Mtg hole Ø N/A
- Aluminium alloy ‘PL’ 66.3 / - Hard anodised Min 35.8mm - Aluminium alloy ‘PL’ 55.1 /
pistons. Dimension 85.6mm surface treatment. Mtg hole Ø pistons. Dimension 81.2mm
- Hard anodised Seal CP4518- PART NUMBERS. Max 12.7mm - Hard anodised Seal CP4518-
Repair Kit KK Min 10.1mm Repair Kit JJ
surface treatment. Bleed - Non Handed. ‘PL’ Dimension
surface treatment. Bleed
PART NUMBERS. Screw 17Nm CP2279-400S4BP Max 54.1mm PART NUMBERS. Screw 17Nm
- Right Hand. Tightening (12.5lbs/ft) Min 54.1mm - Left Hand. Tightening (12.5lbs/ft)
Torque Seal CP4518- Torque
CP2271-182S4QR CP2270
CP2361-96S3QR CP2340
Repair Kit LL
- Left Hand. Pad Family - Right Hand Pad Family
D46 Bleed D43
CP2271-183S4QR Screw 17Nm CP2361-97S4QR
Tightening (12.5lbs/ft)
Torque
Pad Family CP2279

www.apracing.com +44 (0)24 7663 9595

38 Brake Calipers US Stock Car
INTRODUCTION
AP Racing now has a comprehensive range of calipers and discs designed for US Stock Car Racing. The caliper details below rep-
resent a cross section of the range available for series such as Winston Cup, Busch etc. These calipers are available from AP Rac-
ing, but are sold exclusively in the USA through Essex Part Services (contact details below).The “Stock Car” Range of calipers are
usually made to order, however some calipers are stock items, please check availability with AP Racing or Essex Part Services.
Essex Part Services. Tel: +1 704 824 6030 Fax: +1 704 478 1030E-mail: [email protected] Web: www.essexparts.com

CP5410 / CP5510 / CP5610 CP5515 CP5755 / CP5756 / CP5757

4 Piston Calipers. 4 Piston Caliper. 4 Piston Calipers.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Piston Sizes Ø1.125” Piston Sizes
Piston Sizes
- CP5410 - Ø1.25” / 1.12” Ø1.06” - CP5755 - Ø1.62” / 1.75”
- CP5510 - Ø1.12” / 1.06” Disc Dia. Ø11.75” - CP5756 - Ø1.375”
APPLICATIONS. - CP5610 - Ø1.37” / 1.25” APPLICATIONS. Disc Thickness APPLICATIONS. - CP5757 - Ø1.75”
Disc Dia. Ø12.19” - Superspeedway Max 1.25” Disc Dia.
- Intermediate Rear Disc Min 0.81”
- Late Model Max Ø12.19”
1.25” Race Rear. Modifieds & Sprint
FEATURES. Thickness Suggested CP4540- Min Ø11.75”
- Radial Mount. Weight FEATURES. Disc. 125/5CG8 Cars. Disc
3.92lbs 1.75”
- Two piece (No Pads) - Radial Mount. Weight Thickness
3.90lbs FEATURES. Suggested CP3860-
aluminium alloy Hydraulic 3/8”x24 - Two piece billet alu- (No Pads) - Lug Mount. Disc. 106/7PM
billet body. Thread UNF minium alloy body. Hydraulic 3/8”x24
- Two piece billet alu- Weight
Mounting - Aluminium pistons. Thread UNF 3.3lbs
- Differential bore. Radial minium alloy body. (No Pads)
Type - Positive piston Mounting
- Ventilated steel Radial - Mulitple bore Hydraulic 3/8”x24
Mounting retraction for zero Type
pistons. 4.724” Thread UNF
centres drag. Mounting configurations.
- High temperature 4.724” Mtg Type Lug
Mounting
1.904” - Pad to piston centres - S/Steel pistons.
Mounting
seals. offset
attachment.
Mounting
1.904” - High temperature, 3.50”
centres
- Integral bleed Mtg hole Ø 0.443” offset low drag seals.
‘PL’ - High temperature Mtg hole Ø 0.443”
Mtg offset 1.331”
screw & fluid pipe 1.892” seals. - Internal fluid Mtg hole Ø 0.452”
Dimension ‘PL’
protection. - Integral bleed 1.892” pathway. ‘PL’
Seal Repair Kits Dimension 2.860”
- Stainless Steel - Integral bleed Dimension
- CP5410 - CP4518-DE screw & fluid pipe Seal CP4518-
wear plates & pad Seal Repair Kits
- CP5510 - CP4518-DC protection. Repair Kit DC screw protection.
- CP5755 - CP4518-KL
abutments. - CP5610 - CP4518-EG - Stainless Steel Bleed - S/Steel wear plates - CP5756 - CP4518-GG
PART NUMBERS. Bleed wear plates & pad Screw 17Nm & pad abutments. - CP5757 - CP4518-LL
Screw 17Nm Tightening (12.5lbs/ft) Bleed
- Ø1.25”/1.12” Bore abutments. PART NUMBERS.
Tightening (12.5lbs/ft) Torque Screw 17Nm
CP5410-2/3/4/5S0L. Torque PART NUMBERS. Pad Family 7735 - Ø1.75 / 1.62” Bore
- Ø1.12”/1.06” Bore Tightening (12.5lbs/ft)
Pad Family 7735 - Busch Series CP5755-4 & -5S0L.
Torque
CP5510-2/3/4/5S0L. CP5515-2/3/4/5S0. - Ø1.375” Bore CP5755
- Ø1.37”/1.25” Bore - Cup & Truck CP5756-2S0L. Pad Family
D46
Series. - Ø1.75” Bore
CP5515-6/7/8/9S0. CP57572S0L.

CP5805 CP5810 CP5820

6 Piston Caliper. 6 Piston Caliper. 6 Piston Caliper.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Ø1.25” Ø1.125” Ø1.25”
Piston Piston Piston
Ø1.38” Ø1.25” Ø34.0mm
Sizes Sizes Sizes
Ø1.75” Ø1.625” Ø1.625”
Disc Dia. Ø12.19” Disc Dia. Ø12.8” Disc Dia. Ø12.91”
APPLICATIONS. APPLICATIONS. APPLICATIONS.
Disc Disc Disc
- Heavy Duty Late 1.25” - Intermediate Cup / 1.40” - Heavy Duty Road 1.40”
Thickness Thickness Thickness
Model. Suggested CP3847- Busch front. CP3781- course front. CP3784-
Suggested Suggested
FEATURES. Disc. 104/5P FEATURES. 2076/7 FEATURES. 2096/7
Disc. Disc.
Weight G8B1 CR12B1
- LugMount. 6.16lbs - Radial Mount. - Radial Mount.
(No Pads) Weight Weight
- Two piece cast Hydraulic 3/8”x24
- One piece billet (No Pads)
6.24lbs - One piece billet (No Pads)
7.60lbs
aluminium alloy Thread UNF aluminium alloy Hydraulic 3/8”x24 aluminium alloy Hydraulic 3/8”x24
body. Mounting body. Thread UNF body. Thread UNF
Lug
- Differential bore. Type - Offset bridge Mounting - Differential bore. Mounting
Radial Radial
- Ventilated steel Mounting design. Type - Ventilated titanium Type
3.50”
pistons. centres - Ventilated titanium Mounting pistons. Mounting
8.268” 8.26”
- High temperature Mounting pistons. centres - High temperature centres
1.53”
offset Mounting Mounting
seals. - High temperature 1.575” seals. 1.57”
Mtg hole Ø 0.45” offset offset
- Integral bleed ‘PL’ seals. Mtg hole Ø 0.443” - Integral bleed Mtg hole Ø 0.443”
screw & fluid pipe 3.05” - Integral bleed screw & fluid pipe
Dimension ‘PL’ ‘PL’
protection. screw & fluid pipe 2.695” protection. 2.756”
Seal CP4518- Dimension Dimension
- Stainless Steel Repair Kit EGL protection. Seal CP4518- - Stainless Steel Seal CP4518-
wear plates & pad Bleed - Stainless Steel Repair Kit DEK wear plates & pad Repair Kit EFK
Screw 17Nm wear plates & pad Bleed Bleed
abutments. abutments.
Tightening (12.5lbs/ft) Screw 17Nm Screw 17Nm
PART NUMBERS. Torque abutments. Tightening (12.5lbs/ft) PART NUMBERS. Tightening (12.5lbs/ft)
- CP5805-2S0L RHT Pad Family 7753 PART NUMBERS. Torque - CP5820-2S0M RHT Torque
/ -3S0L LHT / -4S0L CP5810-2S0M RHT CP4595 / -3S0M LHT / -4S0M Pad Family 7773
Pad Family
RHL / -5S0L LHL. / -3S0M LHT / -4S0M D54 RHL / -5S0M LHL.
RHL / -5S0M LHL.

www.apracing.com +44 (0)24 7663 9595

 US Stock Car Brake Calipers 39

CP5830 CP5835 CP5842

4 Piston Caliper. 4 Piston Caliper. 6 Piston Caliper.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Piston Ø1.125” Piston Ø1.75” Ø1.25”
Piston
Sizes Ø1.25” Sizes Ø1.875” Ø34.0mm
Sizes
Disc Diameter. Disc Diameter. Ø1.625”
Max Ø12.81” Max Ø12.81” Disc Dia. Ø12.91”
APPLICATIONS. APPLICATIONS. APPLICATIONS.
Min Ø11.75” Min Ø11.97” Disc
- Heavy Duty Road - Superspeedway - Heavy Duty Road 1.65”
Disc Thickness Disc Thickness Thickness
course rear. Max 1.25” race front. Max 1.25” course front. Suggested CP4470-
FEATURES. Min 1.00” FEATURES. Min 1.00” FEATURES. Disc. 112/3GA
- Radial Mount. CP3836- - Radial Mount. Suggested CP3047- - Radial Mount. Weight
Suggested 7.50lbs
2044/5 Disc. 390/CG8 (No Pads)
- Two piece billet Disc.
CG8B1
- Two piece billet - One piece billet Hydraulic 3/8”x24
Weight
aluminium alloy aluminium alloy 5.25lbs aluminium alloy
Weight (No Pads) Thread UNF
body. 7.25lbs body. body.
(No Pads) Hydraulic 3/8”x24 Mounting
Radial
- Differential bore. Hydraulic 3/8”x24 - Aluminium pistons. Thread UNF - Differential bore. Type
- Ventilated steel Thread UNF - Positive piston Mounting - Ventilated titanium Mounting
Radial 8.27”
pistons. Mounting retraction for zero Type pistons. centres
Radial
- High temperature Type drag. Mounting - High temperature Mounting
7.24” 1.71”
Mounting centres offset
seals. 7.24” - Pad to piston seals.
centres Mounting Mtg hole Ø 0.443”
- Integral bleed attachment. 1.61” - Integral bleed
Mounting offset ‘PL’
screw & fluid pipe 1.61” - High temperature screw & fluid pipe 2.756”
offset Mtg hole Ø 0.443” Dimension
protection. Mtg hole Ø 0.443” seals. ‘PL’ protection. Seal CP4518-
2.13”
- Stainless Steel ‘PL’ - Integral bleed Dimension - Stainless Steel Repair Kit EFK
2.13”
wear plates & pad Dimension screw & fluid pipe Seal CP4518- wear plates & pad Bleed
Seal CP4518- protection. Repair Kit LM Screw 17Nm
abutments. abutments.
Repair Kit DE Bleed Tightening (12.5lbs/ft)
PART NUMBERS. - Stainless Steel PART NUMBERS.
Bleed Screw 17Nm Torque
- CP5830-12S0L Screw 17Nm
wear plates & pad Tightening (12.5lbs/ft) - CP5842-2S0M RHT CP5820
abutments. Pad Family
RHT / -13S0L LHT / Tightening (12.5lbs/ft) Torque / -3S0M LHT / -4S0M D62
-14S0L RHL / -15S0L Torque PART NUMBERS. Pad Family
CP2279 RHL / -5S0M LHL.
LHL. CP2279 - CP5835-4S0 RHL 50D
Pad Family
D50
- CP5835-5S0 LHL.

CP5880 CP5890 CP6751 / CP6761 / CP7751

4 Piston Caliper. 6 Piston Caliper. 4 Piston Caliper.
TECHNICAL TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION SPECIFICATION
Piston Ø1.125” Ø1.125” Piston Sizes
Sizes Ø1.25” Piston - CP6751 - Ø1.375”
Ø1.25”
Disc Dia. Ø12.91” Sizes - CP6761 - Ø1.25”
Ø1.625”
Disc Disc Dia. Ø12.81” - CP7751 - Ø1.75” & 1.87”
APPLICATIONS. Thickness
1.307”
APPLICATIONS. APPLICATIONS. Disc Dia.
Ø1.319”
- Road course / Short Suggested CP4670- To suit Disc Max Ø12.19”
- Intermediate Front Thickness
Ø1.358” - Late Model
track rear. Disc. 110/1GE Ø1.46” Min Ø11.75”
(Wide Disc). Modifieds & Sprint Disc
FEATURES. Weight Suggested Disc. 1.25”
5.07lbs FEATURES. Cars. Thickness
(No Pads) CP4670-
- Radial Mount. Hydraulic 3/8”x24 - New ‘Wide Disc’ Ø1.319” FEATURES. Suggested CP3847-
102/3GA
- One piece billet Thread UNF technology. - Lug Mount. Disc. 104/5P
CP4670-
aluminium alloy Mounting Ø1.358” Weight
Radial - Radial Mount. 104/5GA - Two piece cast (No Pads)
4.59lbs
body. Type - One piece billet CP4670- aluminium alloy
Ø1.46” Hydraulic 3/8”x24
- Differential bore. Mounting
7.24” aluminium alloy 106/7GA body.
centres Thread UNF
- Ventilated titanium body. Weight
5.5lbs - Mulitple bore Mounting
pistons. Mounting (No Pads) Lug
1.654” - Three rotor width configurations. Type
offset Hydraulic 3/8”x24
- High temperature combinations. - S/Steel pistons. Mounting
Mtg hole Ø 0.445” Thread UNF 3.50”
seals. ‘PL’ - Differential bore. - High temperature, centres
2.13” Mounting Mounting
- Integral bleed Dimension Radial 1.56”
- Ventilated titanium Type low drag seals. offset
screw & fluid pipe Seal CP4518- pistons. Mounting - Internal fluid
8.26” Mtg hole Ø 0.45”
protection. Repair Kit DE
- High temperature centres pathway. ‘PL’
- Stainless Steel Bleed Mounting 2.83”
seals. 1.634” - Integral bleed Dimension
wear plates & pad Screw 17Nm offset
- Integral bleed screw protection. Seal Repair Kits
Tightening (12.5lbs/ft) Mtg hole Ø 0.445”
abutments. - CP6751 - CP4518-GG
Torque screw & fluid pipe ‘PL’ - S/Steel wear plates
2.704” - CP6761 - CP4518-EE
PART NUMBERS. CP2279 protection. Dimension & pad abutments. - CP7751 - CP4518-LM
Pad Family
- CP5880-2S0M RHT 50D - Stainless Steel Seal CP4518- PART NUMBERS. Bleed
/ -3S0M LHT / -4S0M wear plates & pad Repair Kit DEK - Ø1.375” Bore Screw 17Nm
RHL / -5S0M LHL. abutments. Bleed Tightening (12.5lbs/ft)
CP6751-8 & -9S0L.
Screw 17Nm Torque
PART NUMBERS. Tightening (12.5lbs/ft) - Ø1.25” Bore
Pad Family 7751
- CP5890-2S0M RHT Torque CP6761-8 & -9S0L.
/ -3S0M LHT / -4S0M CP4595 - Ø1.75” / Ø1.87”
Pad Family
RHL / -5S0M LHL. D54 Bore
CP775-14 & -15S0L.

www.apracing.com +44 (0)24 7663 9595

40 Brake Calipers Road
INTRODUCTION
Competition is the
best of test-beds, and
CP5100 - 4 Piston
AP Racing’s years of TECHNICAL
close involvement with SPECIFICATION
motorsport also bring Piston Size Ø38.1mm
benefits for the latest Disc Diameter Ø295.0mm
high performance road Disc Thickness
-802/3/4/5S4 22.9mm
cars. The emphasis may be different, -806/7/8/9S4 25.4mm
GENERAL INFORMATION Weight No Pads 1.9Kg
qualified by the everyday demands of Hydraulic Thread M10x1.0
modern road conditions, but the essential APPLICATIONS.
Mounting Type Radial
requirements remain the same. With a - High Performance Road.
Mtg centres 130.0mm
dedicated Road Car team of engineers FEATURES. Mounting offset
and designers AP Racing helps to bring - Radial mount. -802/3/4/5S4 45.9mm
extraordinary capability to extraordinary - To suit Ø295.0mm x 25.4 & -806/7/8/9S4 47.4mm
22.9mm discs. Mtg hole Ø 10.1mm
cars like, Ascari, Aston Martin, Caterham, ‘PL’ Dimension 53.05mm
Ford, HSV, Koenigsegg, Noble, Morgan, - Two piece aluminium alloy
Seal Repair Kit CP4519-JJ
Lotus, Seat and TVR, to name a few in body, machined from high Bleed Screw
quality die castings. 17Nm
both Brake and Clutch requirements. Tightening
- Staggered equal bores, to (12.5lbs/ft)
AP Racing takes pride in dealing with Torque
such prestigious companies and have the control pad taper. SPARE PARTS
systems in place to offer our customers - Aluminium alloy pistons with Pistons CP2409-160
dirt seals fitted. AKB Spring Kit - CP6518-4LBLL
the best possible service available from a CP5100-210
proven OE Brake System Supplier - Advanced paint finish, Wear Plates
x 2 / -211 x 2
protects against corrosion.
Pad Retainer Bolt
- Red or black colours Retainer P/No.
DESIGN & DEVELOPMENT available. -802/3/4/5S4 CP5100-116
The whole process of design and development is carried out at - Stainless steel bridge pipe, pad -806/7/8/9S4 CP5100-117
our headquarters in Coventry. abutments & wear plates fitted. Ret / Bolt P/No.
With our new brake dynomometer we are able to reproduce the - Pad anti-rattle clip fitted. -802/3/4/5S4 CP3596-112
most demanding test environments. -806/7/8/9S4 CP5100-120
PART NUMBERS.
AP Racing designers use the latest computer technology to Bleed Screw CP3720-173
- To suit Ø295 x 22.9mm disc. Fluid Pipe
produce some of the most aesthetic and effective brake calipers CP5100-802S4 RHT /-803S4 -802/3/4/5S4 CP5100-10
at the affordable prices the markets request. LHT /-804S4 RHL /-805S4 LHL -806/7/8/9S4 CP5100-11
- To suit Ø295 x 25.4mm disc.
CP5100-806S4 RHT /-807S4
LHT /-808S4 RHL /-809S4 LHL
CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance.
MANUFACTURING
The purpose built manufacturing areas of AP Racing Road Car
products benefit from various new manufacturing techniques 113.47 (5.20”)
not only on the build side but also on the system side to. PAD INFORMATION

52.10 (2.05”)
This gives AP Racing the ability to produce brake calipers for - Pad Family = CP3345D44
models in production of up to 10,000 per annum. - Pad Area = 43.4m²
- Pad Depth = 44.1mm
- Pad Thickness = 16.0mm

INSTALLATION DRAWING
W1 MAX W2 MAX
TOP OF
DISC &

W3 MAX 117.0 117.0

MATL
25.30

53.4 DIMN ‘PL’ PAD

RADIUS R4 MAX

RADIUS R3 MAX

EFFECTIVE RADIUS

DISC ROTATION
RADIUS R2 MIN
RADIUS R1 MIN

THE RANGE DIS

.0
DIMN ‘U’

DISC WIDTH C 50
OU ’1 4
TS ‘N SR
ID S DIU
ED DIU RA
The caliper detailed on RADIAL PROFILE
IA
M
ET
ER
RA
TO SCALE ON A
pages 40 to 44 are the Ø295.0x25.4 DISC
DISC & WHEELLC DISC & WHEELLC
IMPORTANT NOTE
most popular from within DISC & CALIPER MOUNTING
TOLERANCES TO BE SUCH

the range but not all are RADIAL PROFILE DIM’N THAT DISC IS CENTRAL TO
CALIPER TO WITHIN ±0.5MM
295.0 x 295.0 x
listed. If your requirements Disc Ø
22.9 25.4 MTG HOLE CENTRES - 130.00
Ø10.10
MTG HOLE

differ form those listed W1 67.75 69.3

W2 70.2 71.8
then please contact W3 47.3 48.9
OFFSET

AP Racing Road Car R1 96.7 96.7

R2 100.7 100.7
Technical Section, R3 151.5 151.5
PAD RETAINING
For details on those R4 166.3 166.3 BOLTS SHOULD
BE TIGHTENED
EFF RAD 125.15 125.15 TO A TORQUE
individuals refer to page 3. OF 13.1Nm
9.7Lb/ft)

www.apracing.com +44 (0)24 7663 9595

 Road Brake Calipers 41

CP5200 - 4 Piston CP5211 & CP5311 - 2 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø38.1mm Piston Sizes
Piston Size
Ø41.3mm CP5211 Ø38.1mm
Disc Diameter CP5311 Ø36.0mm
Max Ø330.0mm Disc Diameter Ø306.0
Min Ø304.0mm Disc Thickness 22.9mm
GENERAL INFORMATION Disc Thickness Weight No Pads 1.5Kg
APPLICATIONS. -802/3/4/5S4 28.0mm
GENERAL INFORMATION Hydraulic Thread M10x1.0
- High Performance Road. -806/7/8/9S4 28.0mm APPLICATIONS. Mounting Type Radial
FEATURES. -810/1/2/3S4 32.0mm - High Performance Road Mtg centres 130.0mm
- Radial mount. Weight No Pads 2.6Kg Front and Rear Mtg offset 26.0mm
- To suit Ø330.0 / Ø304.0mm Hydraulic Thread M10x1.0 FEATURES. Mtg hole Ø 10.2mm
Mounting Type Radial - Radial mount. ‘PL’ Dimension 46.0mm
x 32.0 & 28.0mm disc. Mtg centres 152.0mm Seal Repair Kit
- Two piece aluminium alloy - To suit Ø306.0mm x 22.9mm
Mounting offset CP5211 CP4519-J
body, machined from high -802/3/4/5S4 50.93mm disc. CP5311 CP4519-H
quality die castings. -806/7/8/9S4 46.86mm - Two piece aluminium alloy Bleed Screw
17Nm
- Differential bores, to control -810/1/2/3S4 50.93mm body. Tightening
(12.5lbs/ft)
pad taper. Mtg hole Ø 10.1mm - Aluminium alloy pistons. Torque
‘PL’ Dimension 60.36mm - Piston dirt seals fitted. SPARE PARTS
- Aluminium alloy pistons with Seal Repair Kit CP4519-JK
- Advanced paint finish, Pistons
dirt seals fitted. Bleed Screw CP5211 CP5211-103
- Red or black advanced paint 17Nm protects against corrosion.
Tightening CP5311 CP5311-103
(12.5lbs/ft) - Pad supports / retained on
finish, protects against Torque Pad Retainer Split Pin
corrosion. SPARE PARTS pins Retainer P/No. CP2561-118
- Stainless steel bridge pipe, Pistons PART NUMBERS. Bleed Screw CP3720-173
pad abutments & wear plates Ø38.1mm CP2409-124 - Caliper with Ø38.1mm Fluid Pipe CP5211-10
Ø41.3mm CP2290-50 Pistons
fitted. AKB Spring Kit - CP6518-4LBLL
- Pad anti-rattle clip fitted. CP5211-22S0 RHT /-23S0 LHT
CP5100-306
PART NUMBERS. Wear Plates - Caliper with Ø36.0mm
x 2 / -307 x 2
- To suit Ø330 x 32.0mm disc. Pad Retainer Bolt Pistons
CP5200-802S4 RHT /-803S4 Retainer P/No. CP5311-22S0 RHT /-23S0 LHT
LHT /-804S4 RHL /-805S4 LHL -802/3/4/5S4 CP5200-110 INSTALLATION.
-806/7/8/9S4 CP5200-124 It is important to select the
- To suit Ø330 x 28.0mm disc. -810/1/2/3S4 CP5200-110
CP5200-806S4 RHT /-807S4 correct ‘hand’ of caliper so
Ret / Bolt P/No.
LHT /-808S4 RHL /-809S4 LHL -802/3/4/5S4 CP3894-139 that the bridge pipe is below
- To suit Ø304 x 32.0mm disc. -806/7/8/9S4 CP3596-112 the caliper and bleed screws
CP5200-810S4 RHT /-811S4 -810/1/2/3S4 CP3894-139 are at the top to enable a
LHT /-812S4 RHL /-813S4 LHL Bleed Screw CP3720-173 good hydraulic bleed.
Fluid Pipes
CALIPER HANDING. -802/3/4/5S4 CP5200-110
It is important to select the -806/7/8/9S4 CP5200-124 70.15 (2.76”)
correct ‘hand’ of caliper. See -810/1/2/3S4 CP5200-110
note on page 4 for guidance. PAD INFORMATION
- Pad Family = CP2399D43

58.1 (2.28”)
132.27 (5.20”)
PAD INFORMATION - Pad Area = 27.4m²
- Pad Family = CP3215D50 - Pad Depth = 42.9mm
(2.19”)
55.75

- Pad Area = 57.4cm² - Pad Thickness = 14.4mm

- Pad Depth = 50.3mm
- Pad Thickness = 16.8mm

INSTALLATION DRAWING W1 MAX W2 MAX

INSTALLATION DRAWING 98.40 92.50
20.50
TOP OF

W3 MAX 135.50
30.36 DISC &

135.50
60.4 DIMN ‘PL’ MAT’L
PAD

DIMN ‘PL’
46.0
RADIUS R4 MAX
RADIUS R3 MAX

22.9
DISC ROTATION DISC WIDTH
EFFECTIVE RADIUS

DISC WIDTH ’
‘N
DIMN ‘U’

IUS
RADIUS R2 MIN

AD
DIMN ‘U’

EF
RADIUS R1 MIN

YR 4R
SR
DIS
C HWA ADIU
OU T R
TSID PA
E C
CALIPER RADIAL DIA
ME DIS
PROFILE TER
64.5 MAX 64.5 MAX
DISC & WHEELLC DISC & WHEEL C L
62.5 MAX 62.5 MAX
DISC & WHEEL LC
39.5 MAX 39.5 MAX

RADIAL PROFILE DIM’N

Ø10.1
304 x 330 x 330 x MTG HOLE R6.00
Disc Ø MTG HOLE CTRS 152.00
32 28 32 MTG HOLE CENTRES 130.0
W1 75.7 71.7 75.7 R6.00
RADIUS 180.0 MAX

OFFSET

W2 74.2 70.2 74.2

RADIUS 162.0 MAX
RADIUS 152.5 MAX

26.0
122.0 EFFECTIVE RADIUS

W3 52.75 48.75 52.75

OFFSET

R1 97.3 109.8 109.8 44.0 MAX 44.0 MAX

RADIUS 112.0 MIN
RADIUS 99.8 MIN

RADIUS 102.8 MIN

R2 100.3 112.8 112.8

R3 161.7 171.0 171.0 CALIPER RADIAL PROFILE
R4 176.0 185.5 185.5 DRAWN TO SCALE ON A
Ø306 DISC
EFF RAD 126.4 139.0 139.0 10.2
DISC & WHEEL C L MTG HOLES
PAD RETAINING BOLTS SHOULD BE TIGHTENED
TO A TORQUE OF 13.0Nm (9.7 Lb/ft)

www.apracing.com +44 (0)24 7663 9595

42 Brake Calipers Road

CP5316 & CP5317 - 2 Piston CP5555 - 6 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Piston Sizes Ø27.0mm
CP5316 Ø38.1mm Piston Size Ø31.8mm
CP5317 Ø41.3mm Ø38.1mm
Disc Diameter Ø332.0 Disc Diameter Ø362.0mm
Disc Thickness 26.0mm Disc Thickness
GENERAL INFORMATION Weight No Pads 1.5Kg GENERAL INFORMATION -802/3/4/5S4 36.0mm
APPLICATIONS. Hydraulic Thread M10x1.0 APPLICATIONS. -814/5/6/7S4 32.0mm
Mounting Type Radial Weight No Pads 2.8Kg
- High Performance Road - High Performance Road.
Mtg centres 130.0mm Hydraulic Thread M10x1.0
Front and Rear Mtg offset 27.5mm FEATURES. Mounting Type Radial
FEATURES. Mtg hole Ø 10.1mm - Radial mount. Mtg centres 152.0mm
- Radial mount ‘PL’ Dimension 50.5mm - To suit Ø362.0mm x 32.0 / Mounting offset
- To suit Ø332.0mm x 26.0mm Seal Repair Kit 36.0mm disc. -802/3/4/5S4 55.0mm
disc. CP5211 CP4519-J - Two piece aluminium alloy -814/5/6/7S4 53.2mm
CP5311 CP4519-K Mtg hole Ø 12.1mm
- Two piece aluminium alloy Bleed Screw
body, machined from high ‘PL’ Dimension 62.5mm
body. 17Nm quality die castings.
Tightening Seal Repair Kit CP4519-CEJ
- Aluminium alloy pistons. (12.5lbs/ft) - Differential bores, to control
Torque Bleed Screw
17Nm
- Piston dirt seals fitted. SPARE PARTS pad taper. Tightening
(12.5lbs/ft)
- Advanced paint finish, Pistons - Aluminium alloy pistons with Torque
protects against corrosion. CP5316 CP5218-104 dirt seals fitted. SPARE PARTS
- Pin pad retainer with ‘R’ Clip. CP5317 CP5317-103 - Red or Black advanced paint Pistons
Pad Retainer Clip Ø27.0mm CP5555-108
PART NUMBERS. finish, protects against
Retainer P/No. CP5119-134 Ø31.8mm CP3650-107
- Caliper with Ø38.1mm Bleed Screw CP3720-173 corrosion available. Ø38.1mm CP2409-124
Pistons. Fluid Pipe CP5317-10 - Stainless steel bridge pipe, - CP6518-
AKB Spring Kit
CP5316-2S0 RHT /-3S0 LHT pad abutments & wear plates 4LBSLL
- Caliper with Ø36.0mm fitted. CP5555-120
Wear Plates
Pistons. - Pad anti-rattle clip fitted. x4
CP5317-2S0 RHT /-3S0 LHT PART NUMBERS. Pad Retainer Bolt
Retainer P/No.
INSTALLATION. - To suit Ø362 x 36.0mm disc. -802/3/4/5S4 CP5555-109
It is important to select the CP5555-802S4 RHT /-803S4 -814/5/6/7S4 CP5555-126
correct ‘hand’ of caliper so LHT /-804S4 RHL /-805S4 LHL Ret / Bolt P/No.
that the bridge pipe is below - To suit Ø362 x 32.0mm disc. -802/3/4/5S4 CP5200-101
the caliper and bleed screws CP5555-814S4 RHT /-815S4 -814/5/6/7S4 CP3894-139
Bleed Screw CP3720-173
are at the top to enable a LHT /-816S4 RHL /-817S4 LHL
Fluid Pipes
good hydraulic bleed. CALIPER HANDING. -802/3/4/5S4 CP5555-10
It is important to select the -814/5/6/7S4 CP5555-11
correct ‘hand’ of caliper. See
note on page 4 for guidance.
77.3 (3.04”)

PAD INFORMATION 151.9 (5.98”)

PAD INFORMATION
68.15 (2.68”)

- Pad Family = CP5119D50

- Pad Family = CP3894D54
80.6 (3.17”)
- Pad Area = 33.7cm²
- Pad Depth = 50.0mm - Pad Area = 76.3m²
- Pad Thickness = 14.3mm - Pad Depth = 54.0mm
- Pad Thickness = 18.0mm

INSTALLATION DRAWING INSTALLATION DRAWING

PAD MATL

99.00 MAX. 94.00 MAX. W1 MAX W2 MAX 141.50 MAX 141.50 MAX
TOP OF

62.50 DIMN ‘PL’& DISC

W3 MAX
TOP OF PAD/DISC.

65.50 MAX. 77.00 MAX.

`PL' DIMN

64.50 MAX. 56.50 MAX.

50.50

41.50 MAX.
47.20

R6.00 45.50 MAX.

RADIUS R4 MAX

EFFECTIVE RADIUS
RADIUS R3 MAX

DIS DISC ROTATION

UPRIGHT DIMENSION

R1 W4 MAX C
DIS OU
RADIUS R2 MIN
RADIUS R1 MIN

66 C
.0 PA TS
DIMN ‘U’

0 TH ID
RE RAD WA E D
188.00 MAX.

IA
142.00 EFFECTIVE RADIUS

F. RADIAL PROFILE IUS Y M

(`U' DIMN.)

M R4 ET
A TO SCALE FOR A ER
171.30 MAX.

R6.00 X.
158.80 MAX.

139.90 MAX.

D Ø362.0 X 35.56 DISC

ISC
120.40 MIN.
126.30 MIN.

26.00 REF. DISC

111.30 MIN.

DISC & WHEEL CL

108.30 MIN.

DISC & WHEEL C

L
61.50 MAX. 12.10
CALIPER RADIAL RADIAL PROFILE DIM’N MTG HOLE
Ø22.00 S/FACE
PROFILE AS
FITTED ON 362 x 362 x MTG HOLE CENTRES
Ø332.00 DISC. Disc Ø
130.00 MTG HOLE CENTRES 32. 36
W1 79.8 81.5
Ø10.10
W2 78.3 80.0
OFFSET

W3 58.8 60.5
W4 59.0 60.7
OFFSET
27.50

R1 125.0 125.0
R2 128.0 128.0
R3 183.5 183.5
R4 205.5 205.5
EFF RAD 155.85 155.85
PAD RETAINING BOLT TIGHTENING TORQUE 13.1Nm (9.7Lb/ft)

www.apracing.com +44 (0)24 7663 9595

 Road Brake Calipers 43

CP5570- 6 Piston CP6600 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Ø38.1mm
Piston Sizes
Piston Size Ø31.8mm Ø41.3mm
Ø38.1mm Disc Diameter Ø330.0mm
Disc Diameter Ø330.0mm Disc Thickness 30.0mm
Disc Thickness Weight No Pads 2.8Kg
GENERAL INFORMATION -802/3/4/5S4 28.0mm Hydraulic Thread M10x1.0
GENERAL INFORMATION
APPLICATIONS. -810/1/2/3S4 32.0mm Mounting Type Radial
APPLICATIONS.
- High Performance Road. Weight No Pads 2.4Kg Mtg centres 130.0mm
- High Performance Road.
FEATURES. Hydraulic Thread M10x1.0 Mtg offset 54.0.0mm
Mounting Type Radial FEATURES. Mtg hole Ø 10.1mm
- Radial mount,
Mtg centres 152.0mm - Radial mount. ‘PL’ Dimension 64.5mm
- To suit Ø330.0mm x 28.0 /
Mounting offset 46.86mm - To suit Ø330.0mm x Seal Repair Kit CP4525-JK
32.0mm disc. Mtg hole Ø 10.2mm Bleed Screw
30.0mm disc. 17Nm
- Two piece aluminium alloy ‘PL’ Dimension 60.35mm Tightening
- Two piece aluminium alloy (12.5lbs/ft)
body, machined from high Seal Repair Kit CP4519-CEJ Torque
Bleed Screw
body, machined from high
quality die castings. 17Nm SPARE PARTS
Tightening quality die castings.
- Differential bores, to control (12.5lbs/ft) Pistons
Torque - Differential bores, to control Ø38.1mm CP6200-104
pad taper.
SPARE PARTS pad taper. Ø41.3mm CP6200-105
- Aluminium alloy pistons with
Pistons - Aluminium alloy pistons. Pad Retainer Pin
dirt seals fitted. Ø27.0mm CP4689-108 Retainer P/No CP6600-109
- Piston dirt seals fitted.
- Red or Black advanced paint Ø31.8mm CP5145-103 CP6200-103
- Red or Black advanced paint Wear Plates
finish, protects against Ø38.1mm CP2889-105 x4
finish, protects against
corrosion available. AKB Spring Kit
- CP6518- Bleed Screw CP3880-1
4LBSLL corrosion available. Fluid Pipe CP6600-10
- Stainless steel bridge pipe,
CP5555-174 - Stainless steel bridge pipe,
pad abutments & wear plates Wear Plates
x4 pad abutments & wear plates
fitted.
Pad Retainer Bolt fitted.
- Pad anti-rattle clip fitted. Retainer P/No. - Pad anti-rattle clip fitted.
- Interchangeable with -802/3/4/5S4 CP5200-124 PART NUMBERS.
CP5200 caliper family. -810/1/2/3S4 CP5555-157
Ret / Bolt P/No. - CP6600-2S0 RHT / -3S0
PART NUMBERS.
-802/3/4/5S4 CP3796-121 LHT / -4S0 RHL / -5S0 LHL
- To suit Ø330 x 28.0mm disc.
-810/1/2/3S4 CP3596-112 CALIPER HANDING.
CP5570-802S4 RHT /-803S4
Bleed Screw CP3720-173 It is important to select the
LHT /-804S4 RHL /-805S4 LHL Fluid Pipes correct ‘hand’ of caliper. See
- To suit Ø330 x 32.0mm disc. -802/3/4/5S4 CP5555-56
note on page 4 for guidance.
CP5570-810S4 RHT /-811S4 -810/1/2/3S4 CP5555-71
LHT /-812S4 RHL /-813S4 LHL
CALIPER HANDING.
It is important to select the
correct ‘hand’ of caliper. See
note on page 4 for guidance. 130.0 (5.11”)
PAD INFORMATION
151.9 (5.98”) - Pad Family = CP6600D55

80.6 (3.17”)
PAD INFORMATION - Pad Area = 64.6m²
- Pad Family = CP5070D51
80.6 (3.17”)

- Pad Depth = 55.0mm

- Pad Area = 77.2cm² - Pad Thickness = 16.8mm
- Pad Depth = 51.5mm
- Pad Thickness = 17.0mm

INSTALLATION DRAWING INSTALLATION DRAWING

256.00 MAX.
W1 MAX
TOP OF PAD/DISC

W2 MAX
64.50 `PL' DIMN.

76.75 MAX
51.00 MAX
UPRIGHT DIMENSION ('U' DIM'N)

W3 MAX
50.00 MAX

R1
R4.00 65
UPRIGHT DIMENSION

.0
187.50 MAX

0
RE
189.00 MAX
166.50 MAX

267.00 MAX F
M
168.00 MAX

EFFECTIVE RADIUS

A
X
(`U' DIMN.)

R165 D
ISC
123.00 MIN

.00 R
EF M
AX D
110.00 MIN

IS
107.00 MIN
108.00 MIN

C
105.00 MIN

REF. DISC WIDTH 20.00°

30.00 REF
DISC
CALIPER RADIAL PROFILE AS
FITTED ON A Ø330.00 DISC
0
.1

130.00 MOUNTING CTRS

10

RADIAL PROFILE DIM’N CALIPER RADIAL PROFILE AS FITTED ON Ø330.00 DISC.

87.00 MAX.

330 x 330 x
Disc Ø
28. 32
54.00 OFFSET

W1 71.60 73.6
W2 46.75 46.75
W3 38.0 40.0
OFFSET

W4 77.0 79.0
W4 MAX

Ø10.20 152.00 MTG HOLE CENTRES

www.apracing.com +44 (0)24 7663 9595

44 Brake Calipers Road

CP7040 - 6 Piston CP7600 - 4 Piston

TECHNICAL TECHNICAL
SPECIFICATION SPECIFICATION
Ø27.0mm Piston Sizes Ø38.1mm
Piston Sizes Ø31.8mm Disc Diameter Ø295.0
Ø38.1mm Disc Thickness 24.0mm
Disc Diameter Ø362.0mm Weight No Pads 2.6Kg
Disc Thickness 32.0mm Hydraulic Thread M10x1.0
GENERAL INFORMATION Weight No Pads 3.7Kg GENERAL INFORMATION Mounting Type Radial
APPLICATIONS. Hydraulic Thread M10x1.0 APPLICATIONS. Mtg centres 130.0mm
Mounting Type Radial Mtg offset 47.4mm
- High Performance Road. - High Performance Road.
Mtg centres 152.0mm Mtg hole Ø 10.1mm
FEATURES. Mtg offset 53.2 FEATURES. ‘PL’ Dimension 53.0mm
- Radial mount. Mtg hole Ø 12.1mm - Radial mount. Seal Repair Kit CP4525-JJ
- To suit Ø362.0mm x 32.0mm ‘PL’ Dimension 68.8mm - To suit Ø295.0 x 24.0mm Bleed Screw
17Nm
disc. Seal Repair Kit CP4525-CEJ disc. Tightening
(12.5lbs/ft)
- Two piece aluminium alloy Bleed Screw - Two piece aluminium alloy Torque
17Nm
Tightening SPARE PARTS
body, machined from high (12.5lbs/ft) body, machined from high
Torque Pistons
quality die castings. quality die castings.
SPARE PARTS Ø38.1mm CP6200-104
- Differential bores, to control Pistons - Aluminium alloy pistons. Pad Retainer Pin
pad taper. Ø27.0mm CP7040-118 - Piston dirt seals fitted. Retainer P/No. CP7600-109
- Aluminium alloy pistons. Ø31.8mm CP6609-106 - Red or Black advanced paint CP7605-117
Wear Plates
- Piston dirt seals fitted. Ø38.1mm CP6200-104 finish, protects against x4
- Red or Black advanced paint Pad Retainer Pin corrosion available. Bleed Screw CP3880-1
Retainer P/No. CP6600-109 Fluid Pipe CP7601-11
finish, protects against - Stainless steel bridge pipe,
CP7040-110
corrosion available. Wear Plates pad abutments & wear plates
x4
- Stainless steel bridge pipe, Bleed Screw CP3880-1 fitted.
pad abutments & wear plates Fluid Pipe CP7040-10 - Pad anti-rattle clip fitted.
fitted. PART NUMBERS.
- Pad anti-rattle clip fitted. - CP7600-2S0 RHT / -3S0
PART NUMBERS. LHT / -4S0 RHL / -5S0 LHL
- CP7040-2S0 RHT / -3S0 CALIPER HANDING.
LHT / -4S0 RHL / -5S0 LHL It is important to select the
CALIPER HANDING. correct ‘hand’ of caliper. See
It is important to select the note on page 4 for guidance.
correct ‘hand’ of caliper. See
note on page 4 for guidance.

149.0 (5.86”) 113.48 (4.46”)

PAD INFORMATION PAD INFORMATION
- Pad Family = CP7040D61 - Pad Family = CP7600D46
85.75 (3.37”)

- Pad Area = 72.50cm² - Pad Area = 43.5cm²

(2.29”)
58.37
- Pad Depth = 61.0mm - Pad Depth = 46.2mm
- Pad Thickness = 16.8mm - Pad Thickness = 16.0mm

INSTALLATION DRAWING INSTALLATION DRAWING 228.00 MAX.

279.00 MAX.
72.00 MAX
TOP OF PAD/DISC
TOP OF PAD/DISC

53.00 'PL' DIMN.

47.00 MAX
68.80 ‘PL’ DIMN

78.50 MAX.
48.00 MAX
56.00 MAX.
UPRIGHT DIMENSION ('U' DIMN.)

57.00 MAX.
UPRIGHT DIMENSION

R1
170.00 MAX

81 R1
4 7.5
.0
147.00 MAX

EFFECTIVE RADIUS

0 0R
RE EF
F M
M
('U' DIMN.)

0° AX
AX 30.0
110.00 MIN
206.00 MAX.

DIS
DI
EFFECTIVE RADIUS 152.00

98.00 MIN

C
95.00 MIN

SC
179.50 MAX.

24.00 REF
ON A Ø330.00 DISC

DISC
138.50 MIN.
124.00 MIN.
121.00 MIN.

20.00° 32.00
REF. DISC
0

130.00 MOUNTING CTRS

.1

152.00 MTG HOLE CENTRES CALIPER RADIAL PROFILE AS FITTED ON Ø295.00 DISC
0
12

.1
10
Ø

Ø
88.00 MAX.

75.00 MAX.

CALIPER RADIAL PROFILE AS FITTED ON Ø362.00 DISC.

53.2 OFFSET

47.4 OFFSET

www.apracing.com +44 (0)24 7663 9595

 Competiton Formula Brake Kits 45

on aluminium bells. This allows for the tiny amount of flexing required to avoid distortion
ALUMINIUM MOUNTING BRACKETS
Machined from aluminium billet for maximum strength and weight saving. The brackets
Competition Brake Kits ensure accurate relocation of the calipers making installation simpler. Some competition
brake kits do not contain brackets. Please check before ordering .
AP Racing, the BOLTS, WASHERS AND FIXINGS
world’s premier AP Racing Brake Kits are complete conversions with everything you need. Disc and
Brake specialists, bells are already assembled, mounting nuts and bolts are of high tensile steel.
continue to put
their unrivalled
experience into APPLICATION GUIDE.
producing bolt on Kit Part Disc Size. Brake Wheels &
Application. Year. Caliper. Disc Part Number.
uprated Brake kits Number. (in mm) Pads. Notes.
Alfa Romeo
for a range of 1997 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50-
156. Ø295x28 / 48V 7J x 15”
models for competition use. The Brake on -1060 4 pot CP3580-103G4 (LH) DS3000
Audi
Kits are compatible with standard A1 UR Quattro 1981/ CP3307 CP3307, CP3580-102G4 (RH) CP3215D50-
Ø295x28 / 48V 8J x 15” Standard.
suspension on all applications, but in the 10V & 20V. 1990 -1050 4 pot CP3580-103G4 (LH) DS3000
BMW
majority of cases will require an 318 & 325i / E36, 1991 CP3307 CP3307, CP3580-1138CG8 (RH) CP3215D50-
Ø320x28 / 48V Competiton Wheel.
aftermarket wheel. AP Racing continually E46. on -1068 4 pot CP3580-1139CG8 (LH) DS3000
318 & 325i / E36 1991 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50- 7J x 15, ATS /
improve their Brake Kits by carrying Compact. on -1002A 4 pot
Ø295x28 / 48V
CP3580-103G4 (LH) DS3000 Speedline.
extensive testing programs to replicate E46 (New)
1997 CP3307 CP3307,
Ø295x28 / 48V
CP3580-102G4 (RH) CP3215D50- 7J x 15, ATS /
on -1002A 4 pot CP3580-103G4 (LH) DS3000 Speedline.
the conditions of use. Information on the 1994 CP5040- CP3580-2898G8 (RH) CP3215D50- 8J x 17” BMW
M3 E36 CP5005-3 Ø330x28 / 48V
equipment used in the Brake Kits are on 2/3, 4 pot CP3580-2898G8 (LH) DS3000 Motorsport.
Ford
given opposite. CP5040-
1991 CP5000-510CG8 (RH) CP2340D51- 6J x 15” Compomo-
Escort RS2000. CP5005-8 12/13, 4 Ø295x25 / 24V
on CP5000-511CG8 (LH) DS3000 tive Motorsport.
pot
COMPETITION BRAKE KITS Escort Cosworth.
1991
on
CP5005-2
CP5040-
2/3, 4 pot
Ø330x28 / 48V
CP3580-2898G8 (RH)
CP3580-2898G8 (LH)
CP3215D50- 8J x 17” ATS / TSW
DS3000 Hockenheim.
HAVE:- Honda
1998 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50- Honda 7J x 15”, 5
- INCREASED STOPPING POWER Integra.
on -1051 4 pot
Ø295x28 / 48V
CP3580-103G4 (LH) DS3000 Spoke.
Larger ventilated discs and multi piston Integra.
1998 CP3307 CP3307, Ø295x28 / 48V CP3580-1134CG8 (RH) CP3215D50- Honda 7J x 15”, 5
on -1061 4 pot (Floating) CP3580-1135CG8 (LH) DS3000 Spoke.
calipers means more power and superior 1991 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50- 7J x 15” Comp /
Civic EG6 / EK4. Ø295x28 / 48V
cooling. on -1026A 4 pot CP3580-103G4 (LH) DS3000 Rally +10.0mm.
1991 CP3307 CP3307, Ø295x28 / 48V CP3580-1134CG8 (RH) CP3215D50- 7J x 15” Comp /
- SUPERIOR FADE RESISTANCE Civic EG6 / EK4.
on -1062 4 pot (Floating) CP3580-1135CG8 (LH) DS3000 Rally +10.0mm.
Greater tolerance to heat build up means Jaguar
1971 CP3307 CP3307, CP5000-212CG8 (RH) CP3215D50-
consistent stops. E Type V12. Ø315x28 / 24V Contact;
on -1003 4 pot CP5000-213CG8 (LH) DS3000
Steve Barratt.
- RACE WINNING PEDIGREE 1961 CP3307 CP3307, CP5000-212CG8 (RH) CP3215D50-
E Type. Ø315x28 / 24V Tel:01746 765432.
on -1008 4 pot CP5000-213CG8 (LH) DS3000
AP Racing products have won thousands Mitsubishi
of races including over 590 GP Victories, Lancer Evo 4 1997 CP3720, CP3047-212G8 (RH) CP3215D50-
CP3720-41 Ø310x28 / 24V
Front. on 4 Pot CP3047-213G8 (LH) DS3000
stopping many World Champions in Lancer Evo 4 Rear.
1997 CP3577- CP3577,
Ø285x25 / 24V
CP3047-276G8 (RH) CP2340D43- 7J x 16”,
Championships across the globe. on 1000 4 Pot, CP3047-277G8 (LH) DS3000 Compomotive MS.
Lancer Evo 5 & 6 1998 CP4556- CP4556, CP3580-230G8 (RH)
Ø304x25 / 48V CP2340D43-
Rear. on 1000NP 4 pot CP3580-231G8 (LH)
Nissan
COMPETITION BRAKE KITS Sunny Gti.
1992 CP3307 CP3307,
Ø295x28 / 48V
CP3580-102G4 (RH) CP3215D50- 7J x 16”,
on -1033A 4 pot CP3580-103G4 (LH) DS3000 Compomotive.
ARE:- Peugeot
- 4 OR 6 PISTON CALIPERS 1998 CP5100- CP5100, CP3580-2894G4 (RH) 7J x 15” Speedline
206. Ø295x25 / 24V CP3345D44-
on 1033NP 4 pot CP3580-2895G4 (LH) 2108.
Calipers are made to AP Racing’s exact- 306.
1993 CP3307 CP3307,
Ø295x28 / 30V
CP3580-102G4 (RH) CP3215D50- 7J x 15” Peugeot
on -1011B 4 pot CP3580-103G4 (LH) DS3000 Cup.
ing standards and use two or three pairs 1993 CP5200 CP5200, CP5000-212CG8 (RH) 7J x 16”, Speedline
306. Ø315x28 / 24V CP3215D50-
of opposing pistons, depending on the on -1016 4 pot CP5000-213CG8 (LH) 645 / OZ.
application, in each caliper, Trailing edge Porsche
1998 CP4340- CP4340, CP3700-1032G8 (RH) Replaces CP4240-
FIA GT3 Front. Ø378x36 / 48V CP3558D54-
pistons have a slightly larger diameter on 1001 6 pot CP3700-1033G8 (LH) 1007 kit.
1998 CP4340- CP4340, CP3581-1042G8 (RH) Replaces CP4240-
than the leading ones, to compensate FIA GT3 Rear.
on 1002 6 pot
Ø356x32 / 48V
CP3581-1043G8 (LH)
CP3558D46-
1006 kit.
for mechanical end load and protect the Renault
CP5000-
pads from tapered wear. Clio 16V.
1991 CP5005-
22/23, 4 Ø315x28 / 24V
CP3047-178G8 (RH)
CP3215D50-
8J x 16” ET35
on 9NP CP3047-179G8 (LH) Speedline SL1213.
- LARGE DIAMETER DISCS pot
1991 CP3307 CP3307, CP4348-894G4 (RH) CP3215D50- 7J x 15”,
Ventilated discs have 24, 30 or 48 cooling Clio 16V
on -1031B 4 pot
Ø295x25 / 24V
CP4348-895G4 (LH) DS3000 Compomotive.
vanes depending on the application, to Clio 172 / Cup.
2000 CP3307 CP3307,
Ø295x25 / 24V
CP4348-894G4 (RH) CP3215D50- Standard 16”
on -1069 4 pot CP4348-895G4 (LH) DS3000 Wheel.
draw air through the centres of the discs. 1996 CP3307 CP3307, CP4348-894G4 (RH) CP3215D50-
Megane. Ø295x25 / 24V 7J x 15” Speedline.
They are handed left and right, and are on -1041B 4 pot CP4348-895G4 (LH) DS3000
Subaru
cross drilled or grooved, again, depending 1994 CP5005- CP5006, CP3580-1080RD (RH) 7J x 16”, 5 Spoke
Impreza Inc. WRX Ø304x28 / 48V CP3215D46-
on the application, to allow gasses that on 10NP 4 pot CP3580-1081RD (LH) ET53.
Toyota
build up on the surface to escape. Carina E, 2.0GL 1992 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50-
Ø295x28 / 48V
- COMPETITION BRAKE PADS / GLX. on -1044 4 pot CP3580-103G4 (LH) DS3000 7J x 15”,
Carina E, 2.0 16V, 1992 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50- Compomotive.
AP Racing brake kits come complete GTi. on -1021A 4 pot
Ø295x28 / 48V
CP3580-103G4 (LH) DS3000
with appropriate pads for all-round Vauxhall / Opel
1998 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50-
performance for the individual application. Astra.
on -1045 4 pot
Ø295x28 / 48V
CP3580-103G4 (LH) DS3000
7J x 15”.
We can specify and supply more Astra / Cavalier / 1991 CP5005-
CP5000-
CP3580-102G4 (RH) 7J x 16”,
22/23, 4 Ø295x28 / 30V CP3215D50-
specialised pads.Note: Kits with (NP) in Tigra. on 6NP
pot
CP3580-103G4 (LH) Compomotive.
the Part No do not contain pads. VW
1992 CP3307 CP3307, CP3580-102G4 (RH) CP3215D50- 6.5J x 15”, 5 Spoke
- ALUMINIUM BELLS Golf MK3, 4 Stud.
on -1001C 4 pot
Ø295x28 / 48V
CP3580-103G4 (LH) DS3000 Speedline.
To prevent heat distortion and stress Golf MK3, 5 Stud.
1992 CP3307 CP3307,
Ø295x28 / 48V
CP3580-102G4 (RH) CP3215D50- 6.5J x 15”, 5 Spoke
on -1001A 4 pot CP3580-103G4 (LH) DS3000 BBS.
cracking, the cast iron discs are mounted

www.apracing.com +44 (0)24 7663 9595

46 Formula Brake Kits Road
brakes felt better and the pedal pressure coupling between the hub and the disc
was greatly reduced, proof that the faces. this allows the disc to run true in
AP Racing brakes were able to dissipate the caliper under all conditions and also
Big Brake Kits the heat and resist fade in a way that the permits the disc to expand and contract
original brakes cannot. without being restricted. (See Page 50
for more detailed information).
1
2
3
4 - PERFORMANCE

No of Stops.
5
6 BRAKE PADS
7
8
9
Almost all AP Racing
10
11 Formula Big Brake Kits
12
50 100 150 200 250 300
come complete with
Distance in feet. Ferodo DS2500. These are
Standard Brakes AP Racing Brakes
ideally suited for all round performance
road use. We can advise on, or specify
FORMULA BIG BRAKE KITS and supply more alternative pads.
AP Racing, the world’s premier brake
specialists, continue to put their unrivalled
ARE:
- 4 OR 6 PISTON - FORMULA DOT 5.1 BRAKE FLUID
experience into producing bolt-on uprated
DIFFERENTIAL Formula DOT 5.1 meets
brake kits for a range of models.
BORE CALIPERS the performance crite-
The Formula Big Brake Kits are
Calipers are made to ria of DOT 5.1 and as
compatible with standard suspension
AP Racing’s exacting such is one of the most
on all applications, but in the majority of
standards and use two or three pairs advanced brake fluids on
cases will require an aftermarket wheel.
of opposing pistons, depending on the the market, suitable for
AP Racing continually improve their
application, in each caliper, Trailing edge all conditions likely to be encountered in
brake kits by carrying out extensive
pistons often have a slightly larger modern driving conditions.
testing programs to replicate the condi-
diameter than the leading ones, to
tions encountered by performance brake
compensate for mechanical end load and -STAINLESS STEEL BRAIDED HOSES
systems in everyday use. Information
protect the pads from tapered wear. On & GUARDS
on the equipment used in Formula Big
road cars with thin spoke alloy wheels the Not only do braided
Brake Kits, together with performance
visual effect of the brakes is important. hoses offer extra
data obtained from an independent test
The calipers are hard anodised and then protection against damage, they also
on a typical high performance vehicle
finished with a tough Red or Black hi-tech resist expansion when fluid within them
and a current application lists are given
PTFE paint with the AP Racing logo is under pressure. Standard hoses can
on pages 47 and 48.
embossed in the casting in a contrasting ‘give’ under pressure resulting in a
colour. spongy feel.
FORMULA BIG BRAKE KITS
HAVE:- - LARGE DIAMETER - ALUMINIUM BELLS
- INCREASED STOPPING POWER DISCS To prevent heat distortion
Bigger discs and multi piston calipers Ventilated discs have and stress cracking, the
mean more power. 24, 30 or 48 cooling special cast iron discs are
- REDUCED FADE vanes, depending mounted on aluminium
Greater tolerance to heat build up on the application, to bells. Except BMW Mini & some rear kits.
means consistent stops. draw air through the centres of the discs. This allows for the tiny amount of flexing
- RACING PEDIGREE They are handed left and right, and are required to avoid distortion.
Built with the same care and by the cross drilled or grooved, again, depending
same technicians as our racing brakes. on the application, to allow gasses that - ALUMINIUM
- FULLY ADAPTED FOR ROAD USE build up on the pad surface to escape. MOUNTING BRACKETS
Adapted specifically for the road with dust Where cross drilling is used it is more Machined from aluminium
seals and a durable anti corrosion finish. restrained than on our full face race or steel billet for maximum
discs, as pad longevity is more important strength and weight saving
on a road car than weight saving. The saving.
TESTING discs are wider and of a larger diameter The brackets ensure accurate relocation of
We took an Audi A6 to a test track to
than standard. The extra material controls the calipers making installation simpler.
carry out a back to back test comparison
heat buildup and the larger diameter
between the standard brakes and a set
means that the calipers can be mounted - BOLTS, WASHERS AND FIXINGS
of 6 piston AP Racing brakes (CP5555).
further away from the centre increasing AP Racing Brake Kits are
The same set of wheels and tyres were
the leverage effect, which increases complete conversions with
used for both tests. The procedure was
braking torque while everything you need. Disc
to carry out a series of 12 emergency
decreasing effort and bells are already
stops from 80mph (120kph) in quick
required on the pedal. assembled, mounting nuts
succession and measure the stopping
- HEAVY DUTY DISC and bolts are of high tensile
distance for each stop. As can be seen
APPLICATIONS steel.
from the chart, with the original brakes
When designing heavy
fitted the stopping distance becomes
duty applications AP Racing will use new
progressively worse throughout the test
a new take on disc mounting technology.
until by the end of the test they were
The ‘Strap Drive Disc System’ is a new
taking more than 50ft more to stop the
take on the floating systems currently on
car. By contrast the AP Racing brakes
the market. ‘Strap Drive’ uses a series of
gave consistent performance throughout
stainless steel straps to locate the disc
the test and with addition the AP Racing
to the mounting bell, producing a flexible

www.apracing.com +44 (0)24 7663 9595

 Road Formula Brake Kits 47

DISC SIZE / No
APPLICATION. YEAR. KIT PART No. CALIPER. DISC PART NUMBER. BRAKE PADS. WHEEL & NOTES.
VANES.
Audi.
S2 Turbo Coupe, 5
02 on CP5200-1057 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17” TSW Hockenheim R.
Stud.
CP5555-1006 6 Pot Ø356x35 / 48V CP3781-516G8 (RH) / -517G8 (LH) CP3894D54-DS2500 8Jx18” Momo.
A8 Front. 94 on
CP5555-1007 6 Pot Ø325x35 / 48V CP3581-1066G8 (RH) / -1067G8 (LH) CP3894D51-DS2500 7Jx17” Antera.
A1 UR Quattro,10V/
81-90 CP5200-1014 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17” TSW Hockenheim R.
20V.
CP5200-1025 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17” TSW Hockenheim R.
A3 1.8T. 97 on
CP5570-1003 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 8Jx17” TSW Hockenheim R.
CP5200-1046 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500
S3. 99 on 7.5Jx17” ET32 Standard Ronal.
CP5570-1009 6 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP5070D51-DS2500
94 - 02 CP5200-1007 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17” TSW Hockenheim R.
A4. 02 on CP5200-1055 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500 17” Aftermarket.
94 on CP5570-1002 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 8Jx17” TSW Hockenheim R.
97 on CP5200-1007 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17” TSW Hockenheim R.
A6.
02 on CP5200-1055 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500 17” Aftermarket.
RS4 Front. 2000 on CP5555T1034 6 Pot Ø362x36 / 48V CP3700T1060T2 (RH) / -T1061t2 (LH) CP3894D54-DS2500 8.5Jx18”, ET20 Standard 9 Spoke
Standard Wheel - Kit includes
RS4 Rear. 2000 on CP6602-1000 4 Pot Ø343x26 / 36V CP6950-104T2 (RH) / -105T2 (LH) CP6600D50-DS2500
mechanical park brake caliper.
CP5200-1046 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500
TT. 97 on 7.5Jx17” ET32 Standard Ronal.
CP5570-1009 6 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP5070D51-DS2500
S4 Quattro Front. 98 on CP5570-1005 6 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP5070D51-DS2500 7.5Jx17” ET32 Standard Ronal.
BMW.
318i & 325i, Compact CP5200-1019 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500
91 on 8Jx17” BBS.
E36. CP5570-1010 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500
CP5200-1048 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500
3 Series E46. 97 on 8Jx17” BBS.
CP5570-1011 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500
330i E46. 2000 on CP5570-1011 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 8Jx18” Standard.
535i E60. 03 on CP5555-1043R2.T2 6 Pot Ø362x36 / 48V CP4914-126T2 (RH) / -127T2 (LH) CP3894D54-DS2500 Standard Wheel.
840i Front. CP8041-1000:G8 6 Pot Ø343x32 / 48V CP3581-542G8 (RH) / -543G8 (LH) CP7040D54-DS2500
93-05 9Jx18”, Alpina KBA42255.
840i Rear. CP7607-1003:G8 4 Pot Ø328x24 Int. CP4475124G8 (RH) / 125G8 (LH) CP7600D46-DS2500
CP5555-1009 6 Pot Ø343x32 / 48V CP3581-542G8 (RH) / -543G8 (LH) CP3894D54-DS2500 8Jx17”, M Sport
M3, E36 Front. 94 on CP5200-1036 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, M Sport / Drilled Disc.
CP5200-1036:G8 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500 8Jx17”, M Sport / Grooved Disc.
M3, E36 Rear. 94 on CP5144-1002 4 Pot Standard BMW Disc. Not Included in kit. CP2340D43-DS2500 8Jx17”, M Sport
CP5555-1037 6 Pot Ø356x32 / 48V CP3581-536G8 (RH) / -537G8 (LH) CP3894D51-DS2500 8Jx18”, Aftermarket.
M3, E46 Front. 2000 on
CP5575-1004 6 Pot Ø356x32 / 48V CP3581-536G8 (RH) / -537G8 (LH) CP5070D54-DS2500 18” BMW Standard.
CP5144-1003 4 Pot Standard BMW Disc. Not Included in kit. CP2340D51-DS2500 8.5Jx18” or 19”, M Sport
M3, E46, Rear. 2000 on
CP5144-1004:G8 4 Pot Ø328x20 / 48V CP4475-122G8 (RH) / -123G8 (LH) CP2340D51-DS2500 18” BMW Standard.
M5, E34. 88 on CP5555-1001 6 Pot Ø343x32 / 48V CP3581-542G8 (RH) / -543G8 (LH) CP3894D54-DS2500 8Jx17”, 5 Spoke Standard.
CP5555-1036:G8 6 Pot Ø343x32 / 48V CP3581-542G8 (RH) / -543G8 (LH) CP3894D51-DS2500 18” BMW Aftermarket.
M5, / 5 Series, E39. 97 on CP5555-1038:P 6 Pot Ø356x32 / 48V CP3581-536P (RH) / -537P (LH) CP3894D54-DS2500 18”, Aftermarket / Plain Disc.
CP5555-1038:G8 6 Pot Ø356x32 / 48V CP3581-536G8 (RH) / -537G8 (LH) CP3894D54-DS2500 18”, Aftermarket / Grooved Disc.
M5, E60. 03 on CP5555T1045 6 Pot Ø378x36 / 48V CP3700T1062T2 (RH) / -1061T2 (LH) CP3894D54-DS2500 Standard Wheel.
5 Series, E39. 97 on CP5555-1025 6 Pot Ø356x32 / 48V CP3581-536G8 (RH) / -537G8 (LH) CP3894D51-DS2500 8Jx18”, Aftermarket.
Mini One, Cooper & S. 2000 on CP7611-1000 4 Pot Ø304x24 CP7080-104SD (RH) / -105SD (LH) CP7601D46-J612 16”/17” Aftermarket Rim.
CP5555-1009 6 Pot Ø343x32 / 48V CP3581-542G8 (RH) / -543G8 (LH) CP3894D54-DS2500 8Jx17”, M Sport
Z3M Coupe Front. 98-02
CP5200-1036:G8 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500 8Jx17”, M Sport / Grooved Disc.
Z3M Coupe Rear. 98-02 CP5144-1002 4 Pot Standard BMW Disc. Not Included in kit. CP2340D43-DS2500 8Jx17”, M Sport
Z8 Front. 2000 on CP5575-1005:G8 6 Pot Ø356x32 / 48V CP3581-536G8 (RH) / -537G8 (LH) CP5070D54-DS2500 18” BMW Standard.
Z8 Rear. 2000 on CP7607-1001:G8 4 Pot Ø324x24 / 48V CP4475-124G8 (RH) / -125G8 (LH) CP7600D46-DS2500 18” BMW Standard.
Citroen.
AX. 93 on CP5200-1016 4 Pot Ø315x28 / 36V CP5000-212CG8 (RH) / -213CG8 (LH) No Pads 7Jx16”, Speedline 645/OZ
C2. 03 on CP7607-1002R2:SD 4 Pot Ø330x24 CP7035-104SD (RH) / -105SD (LH) CP7600D46-DS2500 7Jx17”, ET28 Speedline Turini.
Ferrari.
355. 94 on CP5555-1028 6 Pot Ø355x32 / 48V CP3781-2054G8 (RH) / -2055G8 (LH) CP3894D51-DS2500 Standard Wheel.
Fiat.
Punto. 96 on CP5100-1005 4 Pot Ø285x25 / 30V CP4530-916RD (RH) / -917RD (LH) CP2340D43-DS500 7Jx16”, Novitec, 5 Spoke.
Ford.
Sierra Cosworth 2WD. 87 on CP5200-1011 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”,TSW Hockenheim R.
Sapphire Cosworth 4x4 90 on CP5200-1000 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 7.5Jx17”, ATP Torsion.
CP5570-1001 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 8Jx17”, TSW Hockenheim.
Escort Cosworth. 91 on
CP5200-1000 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, TSW Hockenheim.
Focus RS. 02 on CP7040-1006 6 Pot Ø355x32 / 48V CP4542-106CG12 (RH) / -107CG12 (LH) CP7040D54-DS2500 Standard 02/18”.
Focus ST170 (SVT). 01 on CP5200-1063 4 Pot Ø330x26 / 48V CP3580-1164RD (RH) / -117RD (LH) CP3215D50-DS2500 Standard 17”.
Galaxy. 96 on CP5200-1040 4 Pot Ø330x28 / 48V CP3580-294G4 (RH) / -295G4 (LH) CP3215D50-DS2500 Jx17”, Zender Trophy.
Mondeo ST220 CP5200-1065:SD 4 Pot Ø330x26 / 48V CP3580-1164:SD (RH) / -1165:SD (LH) CP3215D50-DS2500 Standard 18” Wheel.
Honda.
CP5200-1057 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 17”, Aftermarket Wheel.
Civic Type R. 02 on
CP5570-1012 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 17”, Aftermarket Wheel.
Integra R, 5 Stud 98 on CP5200-1043 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 7.5Jx17”
Integra R, 4 Stud 98 on CP5200-1042 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 7.5Jx17”
S2000, Black Caliper. CP6627-1000
99 on 4 Pot Ø330x26 / 48V CP3580-1180CG8 (RH) / -1181CG8 (LH) CP6627D51-DS2500 17”, Aftermarket.
S2000, Red Caliper. CP6627-1000:R2
Jaguar.
XK8 / XKR Front. 96 on CP5555-1013 6 Pot Ø356x35 / 48V CP3581-1095T2 (RH) / -1097T2 (LH) CP3894D51-DS2500 8Jx18”, Aftermarket.
XJR6 Front. 95 on CP5555-1003 6 Pot Ø356x35 / 48V CP3581-1095T2 (RH) / -1097T2 (LH) CP3894D51-DS2500 8Jx18”, Aftermarket.
XJR8 Front. 97 on CP5555-1004 6 Pot Ø356x35 / 48V CP3581-1095T2 (RH) / -1097T2 (LH) CP3894D51-DS2500 8Jx18”, Aftermarket.
XJR6 & 8 Rear. 97 on CP5108-1000 4 Pot Ø306x23 Integ CP4450-130T2 x 2 CP2340D43-DS2500 8Jx18”, Aftermarket.
XJS. 84-91 CP5200-1026 4 Pot Ø304x32 / 30V CP3580-2604G4 (RH) / -2605G4 (LH) CP3215D50-DS2500 8Jx16”, Speedline SL243/A.
Lexus.
IS300. 01 on CP7040-1007:CG12 6 Pot Ø355x32 / 48V CP4542-106CG12 (RH) - 107CG12 (LH) CP7040D54-DS2500 18”, Aftermarket Wheel.
Mazda.
MX5, MK1/2, 4 Stud. 85-06 CP7611-1000R2:SD 4 Pot Ø276x34 / 36V CP4136-923SD (Non Handed) CP7601D46DS-JS12 16”, Aftermarket.
RX7. 92-2000 CP5570-1016R2:G8 6 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP5070D51-DS2500 17”, Aftremarket.
Mercedes.
CL 500, Black Caliper. CP5555-1042.CG12
2000 on CP5555-1042R2. 6 Pot Ø355x32 / 48V CP4542-112CG12 (RH) / -123CG12 (LH) CP5070D54-DS5000 18”, Aftermarket Wheel.
CL 500, Red Caliper.
CG12
Mitsubishi.
Eclipse. 96 on CP5200-1018 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 7.5Jx17”, Antera (model L21).
GT3000 & VR4. 92 on CP5555-1031 6 Pot Ø355x32 / 48V CP3871-2054G8 (RH) / -2055G8 (LH) CP3894D51-DS2500 18”, Compomotive MO1880.30S.
Evo 3. 93 on CP5200-1066 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 17”, Aftermarket Wheel.
CP5200-1024 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500
Evo 4, 5 and 6 Front. 97 on 7.5Jx17”, OZ Super Turismo.
CP5570-1004 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500
Evo 5 and 6 Rear. 98 on CP5108-1002 4 Pot Standard Evo Disc. Not included in kit. CP2340D43-DS2500 7.5Jx17”, OZ Super Turismo.
CP5555-1032 Ø332x32 / 48V CP3581-766G8 (RH) / -767G8 (LH) CP3894D51-DS2500 8Jx17”, ET38 Standard.
CP5555-1035 Ø362x32 / 48V CP3718-1068RD (RH) / -1069RD (LH) CP3894D51-DS2500 8Jx18”, Compomotive.
Evo 7 and 8 Front. 01 on 6 Pot
CP7040-1008.CG12 Ø362x32 / 48V CP4542-102CG12 (RH) / -103CG12 (LH) CP7040D54-DS2500 19”, Aftermarket.
CP7040-1009.CG12 Ø355x32 / 48V CP4542-106CG12 (RH) / -107CG12 (LH) CP7040D54-DS2500 18”, Aftermarket.
Evo 7 and 8 Rear. 01 on CP5108-1003 4 Pot Standard Evo Disc. Not included in kit. CP2340D43-DS5000 8Jx17”, ET38 Standard.

www.apracing.com +44 (0)24 7663 9595

48 Formula Brake Kits Road
DISC SIZE / No
APPLICATION. YEAR. KIT PART No. CALIPER. DISC PART NUMBER. BRAKE PADS. WHEEL & NOTES.
VANES.
Nissan.
Skyline GTR32 Front. 92 on CP5200-1003 4 Pot Ø315x28 / 48V CP3580-1034RD (RH) / -1035RD (LH) CP3215D50-DS2500 8Jx16”, Standard Wheel.
Skyline GTR33 Front. 95 on CP5555T1000 6 Pot Ø343x32 / 48V CP4542T120G8 (RH) / T121G8 (LH) CP3894D54-DS2500 8Jx17”, Standard Wheel.
CP5555T1024 Ø343x32 / 48V CP4542T120G8 (RH) / T121G8 (LH) 8Jx17”, Standard Wheel.
Skyline GTR34 Front. 99 on 6 Pot CP3894D54-DS2500
CP5555T1026 Ø356x32 / 48V CP4542T114G8 (RH) / T115G8 (LH) 18”, Aftermarket Wheel.
Skyline GTR33 & CP7618-1000 4 Pot Black
95 on Ø330x24 / 36V CP4475-118G8 (RH) / -119G8 (LH) CP7600D43-DS2500 8Jx17”, Standard Wheel.
GTR34 Rear. CP7618-1000R2.G8 4 Pot Red
300 ZX. 90 on CP5555T1000 6 Pot Ø343x32 / 48V CP4542T120G8 (RH) / T121G8 (LH) CP3894D54-DS2500 8Jx17”, Wheel.
350Z Front. CP7040-1011.CG12 6 Pot Ø362x32 / 48V CP4542T112CG12 (RH) / T113CG12 (LH) CP7040D54-DS2500 Standard Wheel.
350Z Rear. CP7633-1000.CG12 4 Pot Ø330x24 / 48V CP4475-118CG12 (RH) / -119CG12 (LH) CP7600D43-DS2500 Standard Wheel.
Peugeot.
106. 91 on CP5100-1004 4 Pot Ø285x25 / 30V CP4448-916RD (RH) / -917RD (LH) CP2340D43-DS2500 6.5Jx15”, Speedline (212/P1655S1)
206 GTi and Si. 98 on CP5100-1034 4 Pot Ø304x25 / 24V CP4348-528G4 (RH) / -529G4 (LH) CP2340D51-DS2500 16”,Standard Alloy.
306 93 on CP5200-1016 4 Pot Ø315x28 / 36V CP5000-212CG8 (RH) / -213CG8 (LH) No pads 7Jx16”, Speedline 645 / OZ.
405 88 on CP5200-1028 4 Pot Ø315x28 / 30V CP3580-2416G4 (RH) / -2417G4 (LH) CP3215D50-DS2500 7Jx16”, Speedline 645 / OZ.
406 95 on CP5200-1034 4 Pot Ø310x28 / 48V CP3580-1058G8 (RH) / -1059G8 (LH) CP3215D46-DS2500 7Jx16”, Compomotive.
Renault.
Laguna 2L. CP5200-1031 7.5Jx16”, Speedline 645 / OZ.
94 on 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500
Laguna 3L, V6. CP5200-1044 7Jx17”, OZ Sinfonia.
Rover (MG)
220. 95 on CP5200-1041 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 7Jx17”, ET40 Radius R3, 15 Spoke
MG ZR 01 to 05 CP6634-1000R2 4 pot Ø330x26 / 48V CP3580-1180CG8 (RH) / -1181CG8 (LH) CP6627D51-DS2500 17” Standard Wheel.
Saab.
Pre 93 CP5200-1022 4 Pot Ø304x28 / 48V CP3580-66RD (RH) / -67RD (LH) CP3215D50-DS2500 7.5Jx16”, TSW Blade.
900.
93 on CP5200-1006 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, 100+ (Rimstock) DTM.
9000. 93 on CP5200-1010 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, 100+ (Rimstock) DTM.
9-5. 03 on CP5575-1007.G8 6 Pot Ø355x32 / 48V CP3581-536G8 (RH) / -537G8 LH) CP5070D54-DS2500
Seat.
Alhambra. 96 on CP5200-1020 4 Pot Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) CP3215D50-DS2500 8Jx17”, Zender Trophy.
Ibiza / Cordoba. 95 on CP5200-1015 4 Pot Ø295x28 / 48V CP3580-102G8 (RH) / -103G8 (LH) CP3215D50-DS2500 6Jx16”, Ronal 12 Spoke.
CP5100-1000 4 Pot Ø295x25 / 48V CP4348-894RD (RH) / -895RD (LH) CP2340D51-DS2500 8Jx16”, Zender Trophy.
Toledo. 96 on CP5200-1012 4 Pot Ø304x28 / 48V CP3580-66RD (RH) / -67RD (LH) CP3215D50-DS2500 8Jx16”, Zender Trophy.
CP5200-1009 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, Zender Trophy.
Leon Cupra R. 02 on CP5570-1014R2 6 Pot Ø330x28 / 48V CP3580-2898G8 (RH) / -2899G8 (LH) CP5070D51-DS2500 17”, Standard Wheel.
Smart.
Roadster. 05 on CP7626-1002R2.SD 4 Pot Ø325x12, Solid CP2866-234SD x 2 CP7600D46-DS2500 Brabus OE Wheel.
Subaru.
CP5570-1000 CP3580-2898RD (RH) / -2899RD (LH)
6 Pot Ø330x28 / 48V CP5070D51-DS2500 8Jx17”, Raceline.
CP5570-1000.G8 CP3580-2898CG8 (RH) / -2899CG8 (LH)
CP5200-1023 CP3580-2898RD (RH) / -2899RD (LH)
94 - 04 4 Pot Ø330x28 / 48V CP3215D50-DS2500 8Jx17”, Speedline Aliseo ET50.
CP5200-1023.G8 CP3580-2898CG8 (RH) / -2899CG8 (LH)
CP5200-1035 CP3580-1080RD (RH) / -1081RD (LH)
4 Pot Ø304x28 / 48V CP3215D46-DS2500 7Jx16”, 5 Spoke ET35.
CP5200-1035.G8 CP3580-1080CG8 (RH) / -1081CG8 (LH)
Impreza.
CP7040-1001R2.
6 Pot Ø355x32 / 48V CP4542-106CG12 (RH)/-107CG12 (LH) CP7040D54-DS2500 18”, Speedline.
94 on, CG12
& 05 CP7040-1002R2.
6 Pot Ø362x32 / 48V CP4542-102CG12 (RH)/-103CG12 (LH) CP7040D54-DS2500 19”, Speedline.
CG12
CP5200-1071.G8 4 Pot CP3215D50-DS2500
01 - 06 Ø330x28 / 48V CP3580-2898CG8 (RH) / -2899CG8 (LH) 17” wheel.
CP5570-1017.G8 6 Pot CP5070D51-DS2500
98 - 01 CP7615-1002 4 Pot Ø310x24 / 36V CP4450-448P (RH) / -449P (LH) CP7600D43-DS2500 Replace Subaru OE 2 Pot Caliper.
Impreza Rear. CP7625-1000R2.
01 on 4 Pot Ø335x24 / 36V CP6950-110CG12 (RH)/-111CG12 (LH) CP7600D46-DS2500 18”, Standard.
CG12
Toyota.
CP7624-1003R2.
MRS (MK3). 2000 4 Pot Ø304x24 / 24V CP4348-938CG8 (RH) / -939CG8 (LH) CP7600D46-DS2500 16”, Aftermarket Wheel.
CG8
Supra Mk4 Turbo. 93 on CP5555-1008 6 Pot Ø356x36 / 48V CP3581-1096G8 (RH) / -1097G8 (LH) CP3894D54-DS2500 9Jx18”, ET45 Gewalt / Mackin.
Vauxhall.
Vectra. 95 on CP5200-1027 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”.
VX220. 05 on CP7621-1001.CG8 4 Pot Ø308x26 / 48V CP3580-1174CG8 (RH) / -1175CG8 (LH) CP7600D46-DS500 16”, Standard Wheel.
Volvo.
850 T5R. 91 on
CP5200-1005 4 Pot Ø325x28 / 48V CP3580-294RD (RH) / -295RD (LH) CP3215D50-DS2500 17”, Standard, 5 Spoke.
S70. 97 on
VW.
Corrado G60. 90 - 92 CP5200-1015 4 Pot Ø295x28 / 48V CP3580-102G4 (RH) / -103G4 (LH) CP3215D50-DS2500 7.5Jx16”, Zender Trophy.
CP5200-1012 Ø304x28 / 48V CP3580-66RD (RH) / -67RD (LH) CP3215D50-DS2500 8Jx16”, Zender Trophy.
Golf Mk3, VR6 /
92 on CP5200-1009 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, Zender Trophy.
Corrado.
CP5100-1000 Ø295x25 / 24V CP4348-894RD (RH) / -895RD (LH) CP2340D51-DS2500 8Jx16”, Zender Trophy.
CP5570-1003 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500 8Jx17”, TSW Hockenheim R
Golf Mk4 GTi. 98 on
CP5200-1025 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500 8Jx17”, Zender Trophy.
CP5200-1056 4 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP3215D50-DS2500
Golf Mk5 GTi & TDi. 05 on 18” & 19”, Standard Wheels.
CP5570-1015.G8 6 Pot Ø330x28 / 48V CP3580-2898RD (RH) / -2899RD (LH) CP5070D51-DS2500
Sharan. 96 on CP5200-1020 4 Pot Ø330x28 / 48V CP3580-2898G8 (RH) / -2899G8 (LH) CP3215D50-DS2500 8Jx17”, Zender Trophy.

CUSTOMER NOTES.

www.apracing.com +44 (0)24 7663 9595