Parts List 42 256 15 95

Parallel shaft helical gear unit EN Page 1 / 4

F047, FH47, FV47, FT47, FA47B, FH47B, FV47B, FT47B EG 12.10.2016

2-stage 3-stage

When ordering spare parts always quote nameplate data with serial number and designation with part number!
Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see
appropriate parts list.

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de
Parts List 42 256 15 95
Parallel shaft helical gear unit EN Page 2 / 4
F047, FH47, FV47, FT47, FA47B, FH47B, FV47B, FT47B EG 12.10.2016

No. Description Additional specifications SEW standard label Part No. Qty.
1 Pinion * 1
2 Gear * 1
3 Pinion shaft * 1
4 Gear * 1
5 Pinion shaft * 1
6 Gear * 1
7 Hollow Shaft FA47; FA47B 35 mm 06430279 1
7 Hollow Shaft FA47; FA47B; stainless; ASEPTICplus 35 mm 00453072 1
7 Hollow Shaft (inch) FA47; FA47B 1,375 in. 06432794 1
7 Hollow shaft complete FH47; FH47B 35 mm 06431747 1
7 Hollow shaft for shrink disc FH47; FH47B; stainless 35 mm 00439541 1
7 Hollow shaft complete FH47; FH47B 35/36 mm 00424498 1
7 Splined hollow shaft FV47; FV47B 35x2x30x16 06433979 1
7 Hollow shaft for shrink disc FT47; FT47B NG35 06437168 1
7 Hollow shaft for shrink disc FT47B; TorqLoc-Plus NG35 AB 06438369 1
7 Hollow shaft for shrink disc FT47; FT47B; stainless; ASEPTICplus NG35 06438482 1
7 Hollow shaft for shrink disc FT47B; stainless; ASEPTICplus; TorqLoc- NG35 AB 06438601 1
Plus
9 Oil seal W BASF50x80x10-NBR 0017761X 1
9 Oil seal optional oil seal in FKM; ATEX model W BASF50x80x10-FKM 00178012 1
according to category II2G, II2D, II3G, II3D;
ASEPTICplus
10 Oil seal Double sealing; ATEX model according to W B1SF50x74x8/11,5-FKM 00173614 1
category II2G, II2D, II3G, II3D;
ASEPTICplus
11 Deep groove ball bearing 6010-Z 0011281X 1
12 Retaining ring DIN472 80x2,5-FS 00103241 1
17 Spacer tube 51x60x12,5 mm 06430066 1
19 Key DIN6885-1 B10x8x28 55HRC 00116319 1
20 Breather valve W4087 M10x1-CuZn-HEI 00130303 1
20 Breather valve stainless; ASEPTICplus W4087 M10x1-Niro-HEI 00136239 1
22 Gear unit housing FA47; FH47; FV47; FT47 06421474 1
22 Gear unit housing FA47B; FH47B; FV47B; FT47B; TorqLoc- 06420206 1
Plus
25 Deep groove ball bearing 6010-Z 0011281X 1
29 Sealing compound 09102558 X)
30 Tapered roller bearing 30203 0012138X 1
31 Key 2-stage DIN6885-1 B6x6x16 55HRC 00116017 1
31 Key 3-stage DIN6885-1 AB6x6x14 55HRC 00135410 1
32 Spacer tube For i 10,97 to 190,76 20,6x25x15,5 mm 06420605 1
37 Tapered roller bearing 30303 00124648 1
39 Retaining ring DIN472 47x1,75-FS 00103187 1
41 Retaining ring DIN472 35x1,5-FS 00103144 1
42 Deep groove ball bearing 6202 0010485X 1
43 Key DIN6885-1 B5x5x10 55HRC 00114839 1
45 Deep groove ball bearing 6202 0010485X 1
59 Screw plug W4085 B-M10x1-St-ADC3K- 0011426X 5
86 Clamp set complete FT47; FT47B 30 mm 10678220 1
86 Clamp set complete FT47; FT47B 35 mm 10678247 1
86 Clamp set complete FA47; FA47B; stainless; ASEPTICplus 30 mm 10678697 1
86 Clamp set complete FT47; FT47B; stainless; ASEPTICplus 35 mm 10678514 1
86 Clamp set complete FT47; FT47B 1,1875 in. 10678220 1
86 Clamp set complete FT47; FT47B 1,250 in. 10678239 1

* Gearing parts have embossed part numbers. These must always be quoted!
X) if required
When ordering spare parts always quote nameplate data with serial number and designation with part number!
Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see
appropriate parts list.

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de
Parts List 42 256 15 95
Parallel shaft helical gear unit EN Page 3 / 4
F047, FH47, FV47, FT47, FA47B, FH47B, FV47B, FT47B EG 12.10.2016

No. Description Additional specifications SEW standard label Part No. Qty.
86 Clamp set complete FT47; FT47B 1,375 in. 10678247 1
86 Clamp set complete FT47; FT47B 1,4375 in. 10678255 1
86 Clamp set complete FT47; FT47B; stainless; ASEPTICplus 1,1875 in. 10678697 1
86 Clamp set complete FT47; FT47B; stainless; ASEPTICplus 1,250 in. 10678506 1
86 Clamp set complete FT47; FT47B; stainless; ASEPTICplus 1,375 in. 10678514 1
86 Clamp set complete FT47; FT47B; stainless; ASEPTICplus 1,4375 in. 10678522 1
88 Retaining ring DIN472 80x2,5-FS 00103241 1
91 Retaining ring FA47; FA47B DIN472 35x1,5-FS 00103144 1
91 Retaining ring FA47; FA47B; stainless; ASEPTICplus W4161 35x1,5-Niro 00160334 1
91 Retaining ring FV47; FV47B DIN472 37x1,5-FS 00103152 1
92 Disk FA47; FA47B W4126 13x34,5x4,75-St 01034456 1
92 Disk FA47; FA47B; stainless; ASEPTICplus W4126 13x34,5x4,75-A1 00160199 1
92 Disk FA47; FA47B W4126 9/16x1,365x3/16-St 08069409 1
92 Disk FV47; FV47B 01174037 1
93 Lock washer FA47; FA47B; Hollow shaft 35 mm DIN128 A12-FS-Q3F 00109932 1
93 Lock washer FA47; FA47B; Hollow shaft 35 mm; DIN128 A12-A2 00160180 1
stainless; ASEPTICplus
93 Lock washer FA47; FA47B; Hollow shaft 1,375 in. ASME 1/2-FS-A2F 13300865 1
93 Supporting disc FV47; FV47B DIN988 S10x16x1,2-FS 00124079 1
94 Hex head screw FA47; FA47B ISO4017 M12x30-8.8-A2F 00101222 1
94 Hex head screw FA47; FA47B; stainless; ASEPTICplus ISO4017 M12x30-A2-70 00122955 1
94 Hex head screw FA47; FA47B ASME 1/2-13x1-GR5-A2F 08069565 1
94 Cap screw FV47; FV47B ISO4762 M10x30-8.8-A2F 00101443 1
95 Closing plug FA47; FA47B W4299 1-35,7-PE-LD-BK 01146580 1
95 Closing plug FA47; FA47B; stainless; ASEPTICplus W4299 1-35,7-PE-LD-BK 01146580 1
95 Closing cap FV47; FV47B W4300 1-37x10 00106895 1
98 Shrink disk FH47; FH47B W4941 DK-44x80 01226126 1
98 Shrink disk FT47; FT47B W4941 DK-44x80-TL 06439594 1
98 Shrink disk FH47; FT47; FH47B; FT47B; stainless; W4941 DK-44x80-Niro 19067658 1
ASEPTICplus
99 Hood cover FH47; FH47B 01140922 1
99 Hood cover complete FH47; FH47B 06435149 1
99 Hood cover complete FH47; FH47B; mounting to BD, CD - Motor 09076913 1
ab size 80
99 Hood cover complete FH47; FT47; FH47B; FT47B; stainless; 06435858 1
ASEPTICplus; ATEX model according to
category II2G, II2D, II3G, II3D
100 Gear unit cover 06420966 1
101 Hex head screw ISO4017 M6x16-8.8-A2F 00101052 6
102 Gasket 06420931 1
131 Closing cap W4300 1-47x10 00106909 1
137 Supporting disc DIN988 S37x47x2,5-FS 00103519 1
158 Closing plug W4299 4-5,2-PE-LD-NA 19067801 2
160 Closing plug W4299 4-5,2-PE-LD-NA 19067801 2
161 Closing cap W4300 1-22x5 00124400 1
165 Closing plug W4299 1-9,4-PE-LD-NA 00113719 8
167 Closing plug W4299 1-7,2-PE-LD-NA 00136042 8
168 Closing plug FA47; FH47; FA47B; FH47B W4299 1-35,7-PE-LD-BK 01146580 1
168 Closing cap FV47; FV47B W4300 1-37x10 00106895 1
181 Closing cap W4300 1-52x10 00106917 1
183 Oil seal W BASF50x80x10-NBR 0017761X 1
183 Oil seal optional oil seal in FKM; ATEX model W BASF50x80x10-FKM 00178012 1
according to category II2G, II2D, II3G, II3D;
ASEPTICplus
184 Oil seal Double sealing; ATEX model according to W B1SF50x74x8/11,5-FKM 00173614 1
category II2G, II2D, II3G, II3D;
ASEPTICplus
338 Rubber Buffer W4312 12,5x40x20 00133485 2

When ordering spare parts always quote nameplate data with serial number and designation with part number!
Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see
appropriate parts list.

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de
Parts List 42 256 15 95
Parallel shaft helical gear unit EN Page 4 / 4
F047, FH47, FV47, FT47, FA47B, FH47B, FV47B, FT47B EG 12.10.2016

No. Description Additional specifications SEW standard label Part No. Qty.
506 Shim DIN988 37x47x0,1-St 0010373X X)
507 Shim DIN988 37x47x0,3-St 00103977 X)
508 Shim DIN988 37x47x0,5-St 00123404 X)
515 Shim DIN988 25x35x0,1-St 00103691 X)
516 Shim DIN988 25x35x0,3-St 00103934 X)
517 Shim DIN988 25x35x0,5-St 00104167 X)
521 Shim DIN988 63x80x0,1-St 00103799 X)
522 Shim DIN988 63x80x0,3-St 00104035 X)
523 Shim DIN988 63x80x0,5-St 00104191 X)
990 Contact corrosion inhibitor 09107819 1

X) if required
When ordering spare parts always quote nameplate data with serial number and designation with part number!
Mount-on gear units have motors, variable speed gear units or special input shaft assemblies mounted on the drive end. For parts see
appropriate parts list.

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023. D-76642 Bruchsal Tel. (07251) 75-0. Fax (07251) 75-1970. http://www.sew.de