Scribd
Upload
105 views1 page

Column Coupler Design Analysis

This document summarizes the design of a column coupler for a 800mm x 800mm column subjected to an axial load of 4270kN and bending moments. The column is classified as a short column based on its dimensions and effective length. The required steel area is calculated as 12,938mm^2. The document checks the interaction of the axial load and bending moments against code requirements and determines that the column needs to be redesigned.

Uploaded by

vineetuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
105 views1 page

Column Coupler Design Analysis

This document summarizes the design of a column coupler for a 800mm x 800mm column subjected to an axial load of 4270kN and bending moments. The column is classified as a short column based on its dimensions and effective length. The required steel area is calculated as 12,938mm^2. The document checks the interaction of the axial load and bending moments against code requirements and determines that the column needs to be redesigned.

Uploaded by

vineetuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Coupler Design for Column: (for Axial Force corresponding to maximum Moment)

Size of Column 800 mm x 800 mm (b x D)


Concrete Grade 35 N/mm2 , Steel Grade 500 N/mm2

Unsupported Length, lu = 8070 mm


Effective Length for Bending Parallel to Larger Dimensions, l e 6456.0
= mm

(Load Case 805) STAAD Model between Grid 8 to 15 ULS


Axial Load, Pu (kN) = 4270
Moment in the direction of Larger dimension (Top) (kNm) = 4270 X 0.04 443
Moment in the direction of Larger dimension (Bott) (kNm) = 4270 X 0.04 171 from
STAAD
Moment in the direction of Shorter dimension (Top) (kNm) = 135 X 13.20 1494
Moment in the direction of Shorter dimension (Bott) (kNm) = 290 X 13.20 171

le / D = 8 <12 - Short Column


le / b = 8 <12 - Short Column Therefore the Column is Short

ex = lu / 500 + D / 30 = 43 mm > 20mm therefore ex = 43 mm, and Mex = 183 kNm


ey = lu / 500 + b / 30 = 43 mm > 20mm therefore ey = 43 mm, and Mey = 183 kNm

Assume 20 - T 29 + 0 - T 25 with 50 mm cover and 12 mm links


Therefore Area of Steel As = 12,938 mm2, and p = 2.02 %
Pu / fck b D = 0.19 and p / fck = 0.058

Ag = 640,000 mm2
From 39.6, Puz = 0.45fck x Ac + 0.75fy x Asc = 9876 + 4852 = 14,728 kN
and Pu / Puz = 4270 / 14728 = 0.29 Thereforen = 1.1

d' / D (about xx-axis) = 0.08


Hence Chart or Table for d' / D = 0.10 will be used (Chart Number47 )
Mux1 / fck bD2 = 0.100
Hence, Mux1 = 1792 kNm and Mux / Mux1 = 0.25 (Based on STAAD moments)
0.25 (Max of min. ecc. And STAAD BMs)

d' / b (about yy-axis) = 0.08


Hence Chart or Table for d' / D = 0.10 will be used (Chart Number47 )
Muy1 / fck Db2 = 0.092
Hence, Muy1 = 1649 kNm and Muy / Muy1 = 0.91 (Based on STAAD moments)
0.91 (Max of min. ecc. And STAAD BMs)

From IS 456:2000 Clause 39.6:


(Mux / Mux1)^ n + (Muy / Muy1)^ n = 1.09 REDESIGN Column
= 1.09 REDESIGN Column
C:\Users\3647\Desktop\[DESIGN.xlsx]couplers Conc (1.3x1.5) 2

You might also like