Scribd
Upload
187 views1 page

Splitter Indoor

This document summarizes the specifications for multi-band low-loss power splitters for indoor use in 2-way, 3-way, and 4-way configurations from 694-2700 MHz. The splitters have insertion losses less than 0.05 dB, 50 ohm impedance, VSWR less than 1.5 from 694-894 MHz and less than 1.3 from 790-2500 MHz, and intermodulation distortion below -150 dBc. They can handle up to 100W of power and have an IP52 rating for environmental protection.

Uploaded by

Robert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views1 page

Splitter Indoor

This document summarizes the specifications for multi-band low-loss power splitters for indoor use in 2-way, 3-way, and 4-way configurations from 694-2700 MHz. The splitters have insertion losses less than 0.05 dB, 50 ohm impedance, VSWR less than 1.5 from 694-894 MHz and less than 1.3 from 790-2500 MHz, and intermodulation distortion below -150 dBc. They can handle up to 100W of power and have an IP52 rating for environmental protection.

Uploaded by

Robert
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Multi-band Low-loss Power Splitters 694 2700

For indoor use.

2-way Splitter 6942700


3-way Splitter 6942700
4-way Splitter 6942700

Type No. 860 10017 860 10018 860 10019


Frequency range 694 2700 MHz
For connecting ... antennas 2 3 4
Insertion loss < 0.05 dB
Impedance 50
VSWR 694 894 MHz: < 1.52 < 1.52 < 1.5
790 2500 MHz: < 1.25 < 1.25 < 1.3
2500 2700 MHz: < 2.02 < 2.02 < 2.0
Intermodulation IM3 < 150 dBc (2 x 43 dBm carrier)
Max. power 100 W (at 50 C ambient temperature)
Connector N female
Weight approx. 0.6 kg
Profile cross-section 25 x 25 mm
Packing size 242 x 110 x 95 mm
Max. size 204 / 63 / 41 mm

Material: Housing: Aluminum.


Inner conductor: Brass.

DC capability: DC transmission between all terminations


(suitbale for remote power supply systems).

Environmental conditions: IP 52

Input
860 10019
Subject to alteration.
936.2248/b

Internet: www.kathrein.de 860 10017, ... Page 1 of 1


KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973

You might also like