OpenWells Software

Version 5000.1.13.0
Release Notes

Contents
Introduction .................................................................................................................. 2
System Requirements ................................................................................................. 3
Installation .................................................................................................................... 4
Enhancements, Fixed Issues, and Known Issues .................................................... 7
Contacting Landmark Customer Support ............................................................. 280

5000.1.13 Page 1 of 283 July 2014

 OpenWellsSoftware Release Notes

Introduction
This document contains additional information about the OpenWells software
5000.1.13.0 standalone installation. This software version includes fixes and
enhancements for OpenWells, PROFILE, and Data Analyzer software that were
released in previous versions of the Engineers Desktop (EDT).

To go directly to the enhancements, bug fixes, and known issues for individual
applications, click the blue links below:

Engineers Desktop Integration Integration Integration

(EDT) Enhancements Fixed Issues Known Issues

Draft
OpenWells Enhancements Fixed Issues Known Issues

PROFILE Enhancements Fixed Issues Known Issues

Data Analyzer Enhancements Fixed Issues Known Issues

For further information or help, contact Landmark Support.

5000.0.0.0 Page 2 of 283 July 2014

 OpenWells Software Release Notes

System Requirements

Supported Platforms

Windows 7 SP1, 64-bit (note that Windows XP is not supported)

Windows Server 2008 R2 SP1, 64-bit
Windows Vista 64-bit (Vista 32-bit is not supported)
Citrix XenApp 6.0
Citrix XenApp 6.5

Supported Databases

Oracle 11.2.0.2 Server, 64-bit (must connect through 32-bit Oracle Client)
Oracle 11.2.0.2 Client, 32-bit (64-bit Client not supported)
Oracle 11.2.0.3 Client, 32-bit (64-bit Client not supported)
Oracle 10.2.0.4 Server, 64-bit (must connect through 32-bit Oracle Client)
Oracle 10.2.0.4 Client, 32-bit (64-bit Client not supported)
SQL Server 2008 R2 SP1, 64-bit (must connect through 32-bit SQL Native Client)
SQL Server Express 2005, SP3, 32-bit

Hardware Requirements

Recommended for Windows 7 64-bit Minimum for Windows 7 64-bit

Windows 7 Enterprise, 64-bit SP1 Windows 7 Enterprise, 64-bit SP1
2 GHz processor (or greater) 2 GHz processor
4 GB RAM (or greater) 4 GB RAM
SVGA color monitor SVGA color monitor
106-key Windows-ready integrated keyboard 106-key Windows-ready integrated keyboard
MS-compatible mouse or pointing device MS-compatible mouse or pointing device
TCP/IP based network connection 100 Mbps, TCP/IP based network connection 100 Mbps,
or or
FLEXid dongle (bitlock), FLEXnet Publisher FLEXid dongle (bitlock), FLEXnet Publisher
version 11.4 (for licensing) version 11.4 (for licensing)
3 GB or more disk space 2.1 GB disk space
CD-ROM drive (not required if installing from a CD-ROM drive (not required if installing from a
network location) network location)
parallel port or USB port if dongle/bitlock used parallel port or USB port if dongle/bitlock used
video card with 3-D rendering capability, video card with 3-D rendering capability,
minimum 128MB video RAM minimum 128MB video RAM

5000.1.13 Page 3 of 283 July 2014

 OpenWells Software Release Notes

Installation
Note:
Additional details from the EDT Drilling Summary Release Notes may apply. To see the most up-to-date
version of these release notes, visit the Landmark Software Management (LSM) site.

Installation files and documentation for the standalone version of the OpenWells
software are available from the Landmark Software Manager (LSM) site. Download the
installation and documentation files from LSM and close any open applications before
running the OpenWells installer.

1. Open the folder where you downloaded the OpenWells software and run
OpenWells_5000.1.13.0_Release.exe.

The installer splash screen is displayed and the installer checks that required
component software is available. If you are installing the OpenWells software on a
machine that does not have previous versions of the EDT applications installed, you
must install required components.

2. Click Install to install component software. Installer programs will be launched for
each required component.

After all required components are successfully installed, the OpenWells InstallShield
Wizard will start. Click Next > to move forward through the installation steps. Click
< Back to return to a previous step.

5000.1.13 Page 4 of 283 July 2014

 OpenWells Software Release Notes

3. On the Destination Folder screen, click Next if the default installation folder is
acceptable, or click the Change button to specify a different folder.

In the Change Current Destination Folder screen, you can create a new folder for the
OpenWells software or you can use an existing folder. Click OK when your folder is
specified correctly.

4. In the LAM Deployment Configuration screen, enter the path to your license.dat file or
the port and IP address of the network LAM server, then click Next.

5000.1.13 Page 5 of 283 July 2014

 OpenWells Software Release Notes

5. In the Database Deployment Configuration screen, enter the location of the EDM
database to be used by the OpenWells software, then click Next.

The default instance name of an EDM database is EDM5000, the default database
administrator is sa and the default administrative password is Landmark1.

6. When the Ready to Install screen is displayed, click Install.

The OpenWells installer will copy files, install the database, run scripts, and make any
necessary configuration settings. A status bar shows the progress. When everything
completes successfully, the InstallShield Wizard Completed screen is displayed.

7. Click Finish.

5000.1.13 Page 6 of 283 July 2014

 OpenWells Software Release Notes

Enhancements, Fixed Issues, and Known Issues

Descriptions of Enhancements, Fixed Issues, and Known Issues for the Engineers
Desktop (EDT) suite, and the OpenWells, the PROFILE, and the Data Analyzer
software are provided.

To go directly to the enhancements, bug fixes, and known issues for individual
applications, click the blue links below:

Engineers Desktop
(EDT)

OpenWells

PROFILE

Data Analyzer

5000.1.13 Page 7 of 283 July 2014

 OpenWells Software Release Notes

EDT Software

Enhancements Fixed Issues Known Issues

The 5000.1.13.0 release adds new and drops some existing supported platforms, plus
adds enhancements, fixes, and known issues from the 5000.1.0 and subsequent EDT
releases.

EDT Enhancements and New Functionality (Integration)

The EDT integration enhancements and new integration functionality for releases
5000.1.0 through 5000.1.13.0 are described below.

Release 5000.1.13

There are no enhancements to EDT for this release.

Release 5000.1.12

Enhancements and bug fixes were made for COMPASS, EDM, OpenWells,
StressCheck, Well Cost and WELLCAT. Changes were made to the EDM data model
in support of the above changes. Enhancements from the 5000.1.7.1 patch
(OpenWells, PROFILE, and EDM) were ported to the 5000.1.9 release.

EDM Unit Systems

A new unit class Motor Speed Ratio was added to the EDM database, to
support DecisionSpace Well Engineering.
EDM Administration Utility:
Copy Group Settings - This feature allows the administrator to copy EDM Group
settings from one group to one or more existing groups.
Report Visibility Tab - This tab in the EDM Groups configuration node allows the
administrator to decide which all reports will be visible for a specific Event type.
EDM Groups Configuration Area - The EDM Groups configuration area has
been reworked into a tabular format for easier navigation and configuration.
The new interface has the following tabs:
General
Tokens
Report Visibility

5000.1.13 Page 8 of 283 July 2014

 OpenWells Software Release Notes

Data Entry Forms

Canvas Assignments
EDM Users Configuration Area - The EDM Users configuration area has been
reworked into a tabular format for easier navigation and configuration. The new
interface has the following tabs:
General
Tokens
The following system settings have been added to the EDM Administration
Utility:
AutoPopulateBHA - This setting allows the administrator to enable auto-
populating of the Time field in BHA Operations and Bit Operations.
DepthVSDaysPlanByOps - This setting allows the administrator to
change the Depth vs Days Planned curve in Todays Wells to use
planned operations.

Release 5000.1.11

The following system settings have been added to the EDM Administration Utility
to improve performance:
ShowPreviewPane - This setting allows the administrator to disable the
OpenWells Preview Pane.
EnableReportCaching - This system setting allows the administrator to disable
the OpenWells pre-query and pre-load features. This is recommended for
Citrix deployments.

Release 5000.1.10

Enhancements were made for COMPASS, EDM, and OpenWells, software for the
5000.1.10 release.

Release 5000.1.9

Enhancements and bug fixes were made for COMPASS, PROFILE, StressCheck,
WELLCAT, Well Cost, and WELLPLAN. Changes were made to the EDM data model
in support of the above changes. Enhancements from the 5000.1.7.1 patch
(OpenWells, PROFILE, and EDM) were ported to the 5000.1.9 release.

Also, the following changes were made to the EDM Administration Utility:

5000.1.13 Page 9 of 283 July 2014

 OpenWells Software Release Notes

New Daily Cost Summary System Setting - The system setting

DailyCostSummationFields has been added to define the fields used to identify
the Line Item costs for a selected row, when the Total Cost (Cost Summary)
button is selected in the Daily Cost Spreadsheet.
New Data Validation System Setting - The system setting
AddDVScriptingTab has been added to turn on a Scripting tab in the Data
Validation utility, where administrators can define or enhance rules using
JavaScript.
New Validation Text Format System Setting - The system setting
UseRegexOnDVTextFormat has been added to enable text format matches
based on regular expressions.
New Output Reports - A number of new output reports have been added with
this release. For a complete listing of output reports see the Output Reports List
topic.
Planned vs Actual Casing Report
Planned vs Actual Cementing Report
Planned vs Actual Coring Report
Planned vs Actual Hole Section Report
Planned vs Actual Logging Report
Planned vs Actual Mud Report
Planned vs Actual Perforation Report
Planned vs Actual Stimulations Report
Planned vs Actual Tests Report
Planned vs Actual Wellbore Formations Report
Project Lesson Summary Report

Release 5000.1.8

There were no enhancements to EDT for this release.

Release 5000.1.7

Enhancements and bug fixes were made for OpenWells. Bug fixes were made for
PROFILE. Changes were made to the EDM data model in support of the above
changes.

EDM Administration Utility Enhancements

For 5000.1.7, the following enhancements were made to the EDM Administration
Utility:

5000.1.13 Page 10 of 283 July 2014

 OpenWells Software Release Notes

Well Site Canvases - To support the new OpenWells Interactive Well Site, a
number of "pre-configured" canvases are shipped with the EDM database.
Administrators can also create their own within the EDM Administration Utility.
Canvases can be assigned to EDM Groups based on Event Type.

For more information, see OpenWells Enhancements and New Functionality

on page 41.
Improvements to performance for EDM Publishing Service - Report
generation performance was improved by an average of greater than 85% for
all reports.
Improvements to WYSIWYG Layouts - WYSIWYG form layouts can now be
build and configured directly in the EDM Administration Utilitys Layout
Manager. These layouts can be assigned to the OpenWells Classic Data Entry
Forms or to the new Interactive Well Site canvases. A number of WYSIWYG
layouts are shipped:
WYSIWYG form layouts used in OpenWells Classic are located in the
Daily Operations, Stimulations, Casing and Cementing folders.
WYSIWYG form layouts used in the Interactive Well Site are found in the
Casing, Cementing, Recordings and Rig Equipment folders.
Bi-directional Data Synchronization - EDM AutoSync Client addresses the
problem of discrepancies in data updates between the Rig and the Regional
Office and determines whose data to keep by way of policies set at the Regional
level. These policies are configurable by EDM Administrators to conform to
company policies. Several policy templates are provided as starting points;
configurations may be saved and imported to apply to new Rig connections.

AutoSync is used in the new OpenWells Interactive Well Site and can be turned
on in Classic OpenWells, using the AutoSync system setting. In addition
AutoSync requires access to a number of security tokens and roles to operate.

For more information refer to the documentation shipped with EDM AutoSync
software.
Access Online Help from a Server - OpenWells Client installation now
automatically calls the Online help from the Server location.
Picklist Security Levels - Administrator can now restrict an EDM Group or
User's ability to edit picklists in the Picklist Editor.
Internal Picklist Filter Clause - Administrators can now further filter Internal
picklists using the And Filter Clause field in the Data Dictionary.
Internal Picklist Configuration Additions - Users can now edit some areas
of an Internal Picklist.

5000.1.13 Page 11 of 283 July 2014

 OpenWells Software Release Notes

Date Picklist Support - Date fields can now be configured as Data Driven
picklists allowing for more flexibility in defining data entry parameters.
New Unit Type Format for Time - A new format has been added to the Unit
Management System and applied to the Small Time units Class. This format
displays time as HH:MM.
Caching Output Report Files - Administrators are no longer required to delete
the Output Report cache when an Output Report file has been replaced or
changed. EDM now recognizes changes to the Output Report files and reloads
automatically.
Calculate Cement Stage Top/Base MD based on the Pumping Schedule -
Two new system settings have been added to the EDM Administration Utility
that determines the Top and Base MD of a Cement Stage, based on the Fluids
entered in the Pumping Schedule.
TopBaseSlurryAndTestsCodes
TopBaseSlurryAndTests
Non Productive Time (NPT) Administration Tokens - New tokens have been
added to the EDM Administration Utility to allow administrators to restrict a
user's rights to add, edit, view, delete and lock NPT data. The tokens are:
OpenWells.NPT.add,
OpenWells.NPT.delete,
OpenWells.NPT.edit,
OpenWells.NPT.view
EDM.Explorer.NPT.lock.
New System Settings - A number of new system settings have been added to
the EDM database. For more information see the Shipped Parameters topic.
AutoIncrementSurveyMD
AutoSync
AutoCatalogSelect
CheckRigAssociation
ComponentOrder
DisableFishTubular
DisablePicklistReadonly
FluidProduced
OpenHolePlug
TopBaseSlurryAndTestsCodes
TopBaseSlurryAndTests
WbEquipAutoInsCompStatus

5000.1.13 Page 12 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.6

Enhancements were made for CasingSeat, StressCheck, WELLCAT, and

WELLPLAN. Major enhancements and GUI changes were made for Well Cost. Bug
fixes were also made for these applications, and bug fixes only were made for
COMPASS.

Well Explorer Enhancements

For 5000.1.6, Well Explorer has been enhanced to support Workspaces for
CasingSeat, StressCheck, and WELLCAT; these Workspaces operate exactly as
they have always done in WELLPLAN in the past.

Release 5000.1.5

Report Manager Enhancements

For 5000.1.5, Report Manager has been optimized to greatly reduce the time and
memory consumption needed to generate reports. Of all EDT applications that use
the EDM Report Manager, OpenWells software benefits the most from the
performance improvements.

General Benefits
Memory consumptionIn previous versions, EDT applications load the Crystal
Reports engine into memory when invoking the first report. This memory (about
50MB) is not released until you close the EDT application. In EDT 5000.1.5, the
EDM Report Manager is solely responsible for all Crystal Reports operations
related to report generation, thus freeing 50 MB of memory from any hosting EDT
application.

StabilityBecause EDM Report Manager is solely responsible for any Crystal

Reports related operation, no EDT application crashes related to reports will occur.
If the EDM Report Manager crashes, the hosting EDT application will launch it
again for next report generation.

PerformanceIn general, there is a minimum of 1 2 seconds or 10 20%

performance improvement (if cache is present) due to the simplified interface
redesign between the EDM Report Manager and the calling EDT application.
OpenWells software can achieve a greater performance improvement with
additional optimization.

5000.1.13 Page 13 of 283 July 2014

 OpenWells Software Release Notes

Cache IssuesIndividual Report Cache files are now shipped with the EDT
installation and loaded into EDM database. This greatly reduces the time to
generate the first report of any type if the cache is deleted from users local folder.
The time saved with this change is between 10 seconds to more than 1 minute.

3rd party reports benefit from this change when they manually generate each
report once from any users workstation, and then import all files into each EDM
database with the site import feature.

Benefits to OpenWells Software

For a single report, two additional optimizations now exist in the OpenWells
application: PreLoad and PreQuery.

It was observed in the past that the first report of any type typically took more time
than the second report, even from a different well. The two causes for this delay
were that the database needs to compile the queries for the specific type reports
(PreQuery), and the EDM Report Manager needs to load the Crystal Reports file
into memory (PreLoad).

PreQuery and PreLoad settings are configured from the Report tab on the Report
Setup dialog box in OpenWells software, which is accessed from the Tools menu
> Report Setup command. On the Report tab, each report can be configured
independently as seen below.

5000.1.13 Page 14 of 283 July 2014

 OpenWells Software Release Notes

PreQuery and
PreLoad
individual report
options

Because of the specific nature of each report, not all reports will see an observable
reduction in time if the PreQuery or PreLoad options are applied. Landmark
includes a configuration of PreQuery and PreLoad options, which apply settings
that maximize optimization of reports that benefit most from the features.

Optimize only the reports you need

If you select all reports to Pre Load and Pre Query, expect a 1-2 minute
wait after launch before you preview any reports. Therefore only enable
those reports you frequently use.

5000.1.13 Page 15 of 283 July 2014

 OpenWells Software Release Notes

In order to apply any changes made to the PreQuery or PreLoad options, you must
restart the OpenWells application.

PROFILE software takes advantage of the PreQuery and PreLoad options, but
uses the configuration settings applied in OpenWells software.

In addition to the PreQuery and PreLoad optimizations for individual reports

mentioned above, OpenWells softwares batch options also benefit when sorting
reports by type. The batch Export to PDF and batch Print features now balance
performance and memory consumption by restarting the EDM Report Manager
after every 10 reports.

The Preloading option significantly improves OpenWells softwares performance.

However, this may result in excessive memory consumption by EDM Report
Manager. Memory consumption greatly increases when you either manually
preview or batch preview a lot of reports (for example, 20 reports) without closing
the report window. If the report window is closed after a batch preview, the EDM
Report Manager will automatically restart to release the consumed memory.

Beginning with EDT 5000.1.5, the OpenWells application will restart the EDM
Report Manager automatically for every 10 reports during a batch printing and
batch export job and release the memory. Thus, when EDM Report Manager
restarts it will preload the reports you previously selected again and there should
not be any memory issues related to batch printing and batch export.

5000.1.13 Page 16 of 283 July 2014

 OpenWells Software Release Notes

OpenWells software allows you to configure each type of report to display specific
sections with the Tools menu > Report Setup command. Once the view options are
set, reports will print with the same sections all the time. PROFILE uses the options
configured in OpenWells software.

Click this button to view

individual report options

Benefits to Other EDT Software Applications

WELLPLAN reports that used to crash the WELLPLAN application when
invoked for the first time after installation no longer cause a crash.
Over 100 known issues in EDM Publishing Service were re-verified and any
failing verification were fixed.

5000.1.13 Page 17 of 283 July 2014

 OpenWells Software Release Notes

All EDM Publishing Service 5000.1.2.x fixes were included in EDT 5000.1.5.
iWellFile 5000.1.5 Report invocation logic/architecture has also changed to
support the new EDM Report Manager.
If using Adobe Writer Pro 9 to print a report in English text, the Table of
Contents will print on the first page rather than on the last page. Due to
limitations with Adobe Reader, the TOC will continue to print on the last
page.

General Integration Enhancements

For 5000.1.5, various integration improvements were made for this release. These
features include:

COMPASS, OpenWells, PROFILE, Well Cost, and WELLPLAN applications

have added enhancements, including the new version of Report Manager
which reduces memory consumption, increases report generation speed, and
adds other improvements (described above).
Bug fixes were made for most applications.
Changes were made to the EDM data model in support of the above changes.

EDM Administration Utility Enhancements

For 5000.1.5, the following enhancements were made to the EDM Administration
Utility:

Catalog Editor System Settings - Two new Catalog Editor system settings
GenerateAssemblyItemDesc and AlternateCCNConfigcan now be added to
the EDM database. Used together these system settings allow administrators
to define whether the components item description is populated by the
concatenated catalog data or with the description only. To only use the item
description, both system settings must be added to the EDM Administration
Utility and configured as follows:
GenerateAssemblyItemDesc must be set to NO
AlternateCCNConfig must be set to YES

Approval Process Tokens - New tokens have been added to the EDM
Administration Utility to support the new OpenWells and PROFILE Approval
feature. EDM.Explorer.approve, EDM.Explorer.Well.prepare,
EDM.Explorer.Event.prepare, EDM.Explorer.Report.prepare and
EDM.Explorer.Well.viewapprovalhistory.
Approval Point Stamp Location - The location of the Approval Point PDF
stamps in the OpenWells and PROFILE applications can be configured using a
system setting.

5000.1.13 Page 18 of 283 July 2014

 OpenWells Software Release Notes

PROFILE Schematic Tokens - Three new PROFILE system settings can now
be added to the EDM database.
Dual Centered Components - assign specific components to always
draw centered on dual completions.
Low Priority Components - assign lower priority to certain components
drawn in a schematic that can be smaller than others to make more room
for the more important symbols.
Use 2D Symbol Scaling - render the 2D packer symbols, expand the
casing so it doesnt need to bend the dual completions and also use a
few other options only normally needed by the 2D symbol set.

AutoSync Well Assignment - OpenWells users are now able to assign Wells
to an AutoSync Client for bi-directional updates between Rig and Regional
EDM databases. New tokens have been added to support AutoSync and it's
integration with OpenWells software. AutoSync.AssignWell,
AutoSync.Requestwell, AutoSync.remoteConnect and AutoSync.start.

Release 5000.1.4

COMPASS enhancements and bug fixes were made.

OpenWells enhancements and bug fixes were made.
Changes were made to the EDM data model in support of the above changes.

Release 5000.1.3

New platforms are supported.

Release 5000.1.2

There were no enhancements to EDT for this release.

Release 5000.1.1

WELLCAT was added to the EDT suite of applications for the first time in the 5000.1.1
release. Also, some Common Well Explorer enhancements were made. This update
release improves the import/export and sharing of Grades, Pipes/Connections
between StressCheck and WELLCAT, improves the integration between StressCheck
and WELLCAT, and repairs critical defects affecting key StressCheck and WELLCAT
application functions.

5000.1.13 Page 19 of 283 July 2014

 OpenWells Software Release Notes

Well Explorer Enhancements

Tubular Properties ChangesTemperature Deration, Anistropic Radial Yield,
and Anistropic Hoop Yield moved from Material Properties to Grade Properties.
Also, XML import/exports enhanced to not carryover unnecessary tubular
properties that are not used by corresponding assemblies. This simplifies the
process of copying tubular grades, pipes, and connections between the EDM
database and StressCheck or WELLCAT software inventories.
Casings/Tubing CatalogAdded Critical Dimensions (Collapse, Axial, Triaxial
Longitudinal and Triaxial Hoop) to the Casings/Tubings Catalog.
Grades spreadsheetAdded Cost Factor
Materials spreadsheetAdded Thermal Conductivity and Specific Heat
Capacity.
CatalogsCatalogs were added for Well Completion components, and support
for these catalogs was added to OpenWells, PROFILE, WELLPLAN, and
Catalog Editor.

Release 5000.1.0

The 5000.1.0 release of Engineers Desktop supports the Microsoft Vista operating
system, has new LAM (FLEXnet Publisher) licensing and contains some critical bug
fixes. Well Cost was added to the EDT suite of applications for the first time in this
release.

In addition to EDM database changes, a number of workflow improvements and

usability enhancements were made to the Drilling & Completions applications to
provide for consistent data management and user interaction with these products.
More complete enhancement descriptions for each of the Engineers Desktop
applications are provided in their respective sections. This section will detail new EDT
software functionality and user interface components shared between the Drilling
applications.

Enhancements for EDT release 5000.1 include the following:

EDT 5000.1.0 Common Well Explorer Enhancements

Located by default on the left side of the application window, the Well Explorer
functions much like the Microsoft Windows Explorer. Specifically, it is organized
as a hierarchical data tree, and you can browse the EDM database at seven
descending levels, though this varies between applications.

For 5000.1.0, the following new features were added to Well Explorer:

5000.1.13 Page 20 of 283 July 2014

 OpenWells Software Release Notes

Location InformationAdded a Location tab to Site and Well Properties

dialog boxes. This tab displays any location information that was added in the
COMPASS application.

Location tab added to Well

Properties dialog box
(read only in all
applications except the
WELLPLAN application)

Location Uncertainty and

Azimuth Reference added
to Site Properties dialog

Tubular Properties ChangesAnisotropic Radial, Hoop Yields, and

Temperature Deration have been moved from Material Properties to Grade
Properties. Also, XML imports/exports have been modified so that they dont
carry unnecessary tubular properties that are not used by the corresponding
assemblies.
Implementation in Real-Time View: The Well Explorer implementation in
Real-Time View software exposes logs, and any associated curves, from the
Wellbore level.

5000.1.13 Page 21 of 283 July 2014

 OpenWells Software Release Notes

Filter
shows currently
selected filter
(notice funnel
indicating a filter is
applied to this node)

Virtual Folder Hierarchical

Tree
Currently selected
data item (a Well, in Log
this example)

Log Curves

Associated Data Viewer

Components associated
with the selected data A file or folder
item (the Well, in this linked to the
example). Double-clicking selected Well
on Lesson Learned, or as an
Attachments opens the attachment
respective editor on
demand.

Figure 1: Well Explorer, shown in the Real-Time View application

Well Explorer was added to Real-Time View with the following special
features:
New icons added for log ( ) and log curves ( ). Logs can now be
opened by double-clicking on the Log icon in the Well Explorer.
Also, logs can now be opened from a right-click menu command on the
Log icon in the Well Explorer.
Drag and Drop individual log curves onto the log viewing area
ASCII, LAS (Time), and LAS (Depth) log import from the Wellbore level
right-click menu. The functions are now accessed via context menu
commands from the Well Explorer.

5000.1.13 Page 22 of 283 July 2014

 OpenWells Software Release Notes

Logs can be opened, imported, renamed, and deleted from the Well
Explorer

General Integration Enhancements

For 5000.1, various integration improvements were made for this release. These
features include:

License ExpirationUsers will now be warned when their product license is

about to expire. This option is configured through the LAM Environment
variable.
.

License expiration information

shown in the Help > About
dialog box.

Figure 1: License Expiration

Password ExpirationPassword Expiry option now available for EDM users,

configured through the EDM Administration Utility. EDM Administrators have
the option to set an expiration on user passwords. This option is configured in
the EDM Administration Utility. Starting 14 days prior to the password expiry,
the user receives the following message each time they log in, and can change
the password or defer the notification an additional day.

5000.1.13 Page 23 of 283 July 2014

 OpenWells Software Release Notes

Figure 2: Password Expiration Notice

Definitive Survey LockingThe Definitive Survey is the composite survey for

a wellbore from surface to bottomhole (TD). It is used as the reference survey
in anti-collision calculations, which are regarded as safety critical in well
operations. The Definitive Survey is shared across several applications
(OpenWells, PROFILE, StressCheck, WELLPLAN) but can only be edited in
the COMPASS application, which is the main application for managing
directional survey information. To improve security of the definitive survey, a
two-pronged approach has been taken: (1) Token-based locking mechanism,
and (2) Definitive Survey locking mechanism.

The Token-Based Lock mechanism is an alternative to the password protected

method of managing and using the Lock checkboxes in the Well / Contractor
Explorer property dialog boxes. This new mechanism makes it possible to
define who can lock any particular item within the Well / Contractor explorer
hierarchy on a per group and/or user basis.
The Token-Based Lock mechanism is enabled by setting the
UseLockSecurityTokens system setting to TRUE.
To support this new method lock tokens have been added to EDM for
each property dialog box. If a group or user is granted the lock token for
a property dialog box they will have the ability to lock the information
within that dialog box. If the token is revoked the lock field for that
property dialog box will be disabled for that user or group.

The Token-Based Lock mechanism operates independently of any Locked

Data passwords set at the Company level. Users will not be prompted with
warning or password dialog boxes when enabling or disabling a locked field.

The Definitive Survey Lock field is a new checkbox added to the Survey
Program tab in the Actual Design properties dialog box. Enabling the Definitive
Survey Lock performs the following actions:

The Survey Program for the Actual Design is locked

The Vertical Section for the Actual Design is locked
Any Survey that contributes to the Survey Program is locked. This
includes surveys in parent wellbore designs that contribute to the

5000.1.13 Page 24 of 283 July 2014

 OpenWells Software Release Notes

sidetrack definitive path defined by the locked survey program.

The Definitive Survey Lock field is only available within the COMPASS Actual
Design properties dialog box. If the Definitive Survey Lock has been set in the
COMPASS application, the OpenWells application will treat the affected survey
data as read only.

Upgraded WITSML supportAbility to import/export WITSML 1.2.0 and 1.3.1

objects supported by the OpenWire application. (For the file based WITSML
1.2.0 and 1.3.1 Import/Export, only five objects are supported: Well, Wellbore,
Trajectory, Fluids, Target. OpenWire software supports many more. The
attribute mapping has greater coverage for 1.3.1. Well, Wellbore, and
Trajectory can be imported and exported through the COMPASS and
OpenWells applications. Fluids can only be imported and exported through the
OpenWells application. Targets can only be imported and exported through the
COMPASS application.)
Geodetic Information transferGeodetic information is now exported in
transfer files.

EDM Administration Utility Enhancements

For 5000.1, the following enhancements were made to the EDM Administration
Utility:

Survey Locking Configuration to support Definitive Survey Locking was

added.
Password ExpirationAdministrator can set expiration on user password,
forcing the user to change their passwords at regular intervals.
Enhanced User ManagementAdded EDM Security > Users node > Sort
Users right-click menu command to the EDM Administration Utility. EDM
Administrators can now sort users by User Name or Full Name.
Security Tokensthese were added to support Sub-Assemblies in the
PROFILE application.
New System SettingNPD_CDRS_LOG_TEMPTYPE has been added to
support CDRS Report Generation (for the OpenWells application).
Rig Type ImagesAdministrators can assign the four available OpenWells
Rig Equipment Editor images to any Rig Type Code (for the OpenWells
application).
Shakers in WYSIWYGShaker Operations have been added to the
WYSIWYG layout (for the OpenWells application).

5000.1.13 Page 25 of 283 July 2014

 OpenWells Software Release Notes

Custom WYSIWYGAdministrators can add custom WYSIWYG forms that

can be assigned to OpenWells report layouts.

5000.1.13 Page 26 of 283 July 2014

 OpenWells Software Release Notes

EDT Fixed Issues (Integration)

The EDT integration issues fixed for releases 5000.1.0 through 5000.1.13.0 are described
below.

Release 5000.1.13

There are no additional EDT integration issues fixed for this release.

Release 5000.1.12

There were no additional EDT integration issues fixed for this release.

Release 5000.1.11

The following issue was fixed for the 5000.1.11 release.

Defect No. Description

884054 Improved memory performance when using the simple find dialog in EDT applica-
tions.

Release 5000.1.10

The following integration issues were fixed for the 5000.1.10 release.

Defect No. Description

864825 Per-role.config file missing from server in 5000.1.9.0
866910 EDT 5000.1.9 release notes indicate an incorrect Oracle 11 client driver for Windows
7.
880049 COMPASS: Casing depth field in Casings Form displaying md_assembly_top and
not md_assembly_base. Existed in 5000.1.9 release.

5000.1.13 Page 27 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.9

The following integration issues were fixed for the 5000.1.7.1 patch and ported to the
5000.1.9 release of EDT software.

Defect No. Description

839553 Clone of 821751: 'Load Selected' feature for log curve is not working when the pipe-
line is created directly from WellPlan.

838761 Install issue - files and directory missing

844387 Viewing design properties in Common Well Explorer causes update to design
(recorded in Audit tab) even when locked.

848783 SAM server sends multiple close messages for scenarios when OpenWells closed.
Happens when OpenWells closes after having opened and closed a given design in
"read only" mode multiple times.

853732 OpenWells: SAM: Surveys: Screen jumped and my survey and survey stations dis-
appeared due to SAM message that other user had corrected survey in Compass

Release 5000.1.8

There were no additional EDT integration issues fixed for this release.

Release 5000.1.7

The following issue was fixed for the 5000.1.7 release of EDT software.

Defect No. Description

828886 Remove any parameters that are no longer valid logging items for SAM.

830469 EDT 5000.1.5.x and higher upgrade unpacks Historian files to Temp folder irrespec-
tive of whether user wants to install Historian or not.

Release 5000.1.6

The following issue was fixed for the 5000.1.6 release of EDT software.

Defect No. Description

826558 EDM AutoSync has problems with text data that contains ASCII control codes.

5000.1.13 Page 28 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.5

The following issues were fixed for the 5000.1.5 release of EDT software.

Defect No. Description

813355 Well Explorer: Drilling applications should search filter file (*.qry) from the default
shared folder (\Documents and Settings\All Users\Application Data\Land-
mark\OpenWells\Queries\Drilling).

814584 EDM Publisher: EDM Publisher will not generate reports or send emails if the ser-
vice is running on Windows 2003 Server.

Release 5000.1.4

There were no additional EDT integration issues fixed for this release.

Release 5000.1.3

Defect Description Product Version Comp Comp

No. Reported Level 1 Level 2
786220 Fails to install SQL Server EDT 5000.1.0 EDM Installation
Express 2005 successfully for
64-bit operating system. This
has been fixed in 5000.1.3.

Release 5000.1.2

The following EDT integration issues were either addressed or have workarounds for
the 5000.1.2 release.

Defect Description Product Version Comp Comp

No. Reported Level 1 Level 2
633125 BHA Summary Report perfor- EDT 2003.14.0. Reporting
mance improved by producing 0 Engine
exact Schematic plots
786220 Install: Update the EDT installa- EDT 5000.1.0 Install
tion to handle 64-bit OS. Fixed
for the 64-bit versions of Win-
dows Vista and XP in the
5000.1.3 update release.
788983 Need to reduce Report Manager EDT 5000.1.0 Reporting
memory footprint Engine

5000.1.13 Page 29 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Product Version Comp Comp

No. Reported Level 1 Level 2
796814 OpenWells reports are read only EDT 2003.16.1. Integration
when actual design is open in 17 Require-
PROFILE ments
796814 OpenWells reports are read only EDT 2003.16.1. Integration
when actual design is open in 17 Require-
PROFILE ments
797041 Add the ability to place a EDT 5000.1.0.0 Reporting Data Gener-
{todays} date in the Reports 02 Engine ation
config file
797044 Ability to store "partner" email list EDT 5000.1.0.0 Reporting
in the xml config 02 Engine
797702 Request for EDT R5000 that all EDT 5000.1.0 General
the Application login screens dis-
play only ODBC Data Source
Names that are using the ODBC
Driver: SQL Native Client.
798156 Request for EDT R5000 and EDT 5000.1.0 General
above versions that all C/C++
Application login screens dis-
play only ODBC Data Source
Names that are using the ODBC
Driver: SQL Native Client.
799430 SQL Server Utility - No longer EDT 5000.1.0 General
launches after installing the Win-
dows Update Hotfix 3073 for MS
SQL Server 2005 SP2.

Release 5000.1.1

There were no additional EDT integration issues fixed for this release.

Release 5000.1.0

Defect No. Description

161642 Integration: SAM indicator stays green after the SAM service has stopped. (Fixed)

634540 Reporting Engine: Report Manager not staying active for reports run in PROFILE.
(Fixed)

701247 Runtime: A number of picklists get deleted from the database after a migration.
(Fixed)

5000.1.13 Page 30 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

702735 Well Explorer: Hazards selection interface in Well Properties implemented inconsis-
tently. (Fixed)

703081 Data Services: WELLPLAN software crashes on deleting (in OpenWells software)
an Instant Case created in WELLPLAN software. (Fixed)

703379 Reporting Engine: Web/scroll wheel doesnt work when previewing the COMPASS
reports. (Fixed)

715048 Data Services: COMPASS software crashes when you do a backup at the default
location. (Fixed)

719181 Data Services: Daily Operations Data Entry forms Arrive/Depart Checklist data not
visible after Wellbore level export. (Fixed)

721451 Data Model: Manual run of database update (Oracle) throws missing or invalid
option error. (Fixed)

721543 Data Model: MEASURE_GAL_HR unit is incorrect on database update. (Fixed)

722852 Data Model: Coring report fields DM_CORE.interval_base and DM_CORE.inter-

val_top need to be flagged as depth datum affected. (Fixed)

725895 Data Services: Copying wellpath from another design creates duplicate 0 depths.
(Fixed)

723612 Data Synchronization: OpenWells and Field/Office Data Transfer track Report
Transfer status differently. (Fixed)

726576 Citrix: Error generated in Citrix environment when migrating data (COMPASS For
Windows software import). Workaround: Assign read/write rights to the data transfer
properties file on the Citrix server. (Fixed)

727011 Reporting Engine: After a few reports are open in Report Manager, additional reports
fail with out of memory issues.

727988 Citrix: Citrix Virtual Memory Optimization incompatible with some applications; appli-
cations fail to launch; the logon dialog box does not appear. This is a known issue
with Citrix MetaFrame Presentation Manager 4s new Virtual Memory Optimization
feature. Workaround: Either turn off the Virtual Memory Optimization feature, and re-
install the applications. Applications will now launch properly. Alternatively, a list of
specific DLLs and executables can be disabled without requiring Virtual Memory
Optimization to be turned off (refer to the EDT Citrix Guide). Citrix may address this
issue in future releases. (Fixed)

728606 Localization: For Chinese localization, OpenWells software hangs while changing
language in status bar when OpenWells Well Explorer dialog box is open. Work-
around: Add the following environment variableEnableMultiLanguage (MUST be
set to the value 'true')to allow multi-language input system, such as Chinese, to
work correctly with OpenWells software. Other Drilling applications that re-use parts
of OpenWells software (Lessons Learned and Find dialog boxes, for example) will
also need this environment variable. (Fixed)

5000.1.13 Page 31 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

728802 All applications: System filters for the new Find feature in the Well Explorer tree are
only available for the installed user. Other users (for example, Citrix or client-server
users who did not install the software using their userid) will have to copy the system
filter *.query files to their local user directory. The local user directory is where the
applications look for the *.query files used for by the Find feature. These *.query files
can be copied from the following location (which is the local user directory of the per-
son who installed the software):

C:\Documents and Settings\

<InstallUserID)\ApplicationData\Landmark\OpenWells\Queries\Drilling. (Fixed)

729229 Runtime: Data Migration Tool shuts down automatically during post-migration pro-
cess (Oracle only). No errors. (Fixed)

729949 Runtime: For the 2003.14.1.0 to 2003.16 Oracle 9i upgrade, EDM system settings -
Project Data Locking setting information is lost. (Fixed)

730051 Field/Office Data Synchronization: Custom configuration import doesnt create pick-
lists. (Fixed)

733747 Reporting Engine: Report Manager should filter fields used in .rpt file. (Fixed)

737110 Admin Utility: When importing Site Configuration files, the Date is invalid. (Fixed)

775560 Installation: Error 1718: File <filename> was rejected by signature policy. This Win-
dows 2003 Server issue occurs when the Windows Installer has insufficient memory
allocated and therefore cannot verify that the *.msi or *.msp package contains a
valid digital signature. WORKAROUND: Install Microsoft hotfix KB925336 at http://
support.microsoft.com/kb/925336.

781431 A SQL Server/MSDE/SQL Server Express Database Name cannot have a dot (.) in
it. If your EDM Database Name has a dot (.) in it, the Database Upgrade will not
work properly. (For example, the Database Name EDMDB will work, EDM.DB will
not). This does not affect your database Description (for example, EDM 2003.21)

5000.1.13 Page 32 of 283 July 2014

 OpenWells Software Release Notes

EDT Known Issues (Integration-related)

The Engineers Desktop software release has been a significant development effort
intended to realize the primary strategy of supplying integrated applications to the client
that enable engineering workflows. For each product, changing the application to support
a new data model was a significant challenge.

Engineers Desktop software is being released with some outstanding issues that are
known, but not thought to prevent users from achieving the efficiency gains provided by
these applications. The following list of issues enables clients to compare observed
application behavior against issues known to us at the time of release. These issues will
be addressed in future releases of EDT software together with any additional issues
reported by clients.

Release 5000.1.13

The following EDT integration known issues were reported for the 5000.1.13.0
release.

Defect No. Description

942774 Errors will be displayed during copy/paste workflows if the database upgrade was
run when logged in as edmadmin rather than sa.
To prevent this issue run the database upgrade as a system administrator.

Release 5000.1.12

There were no additional EDT integration known issues for this release.

Release 5000.1.11

There were no additional EDT integration known issues for this release.

Release 5000.1.10

The following EDT integration known issues were reported for the 5000.1.10 release.

Defect No. Description

864825 Pe-role config file missing from server in 5000.1.9 release.

866910 EDT 5000.1.9.Release Notes indicate an incorrect Oracle 11 client driver for Win-
dows 7.

5000.1.13 Page 33 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

870534 Update Help About dialogs and Splash Screens in all EDT applications per the
detailed specifications in the MS Word document attached to the Notes

872677 DB update script failed to create DM_STIM_TREATMENT_PROPPANT table.

875782 [Oracle][ODBC][Ora]ORA-01460: unimplemented or unreasonable conversion

requested Error on Design export.

876304 [Oracle][ODBC][Ora]ORA-01008: not all variables bound Error on Multi Version

Import

878994 EAS 5000.1.9.1 Constraint for sync_resource_root needs to be altered

Release 5000.1.9

The following EDT integration known issue was reported for the 5000.1.9 release.

Defect No. Description

860311 Install - DS Compatibility platform - unexpected unable to access errors - install does
complete successfully

Release 5000.1.8

There were no additional EDT integration known issues for this release.

Release 5000.1.7

There were no additional EDT integration known issues for this release.

Release 5000.1.6

The following EDT integration known issue was reported for the 5000.1.6 release.

Defect No. Description

831966 Uncaught Java Exception (Java heap space) error on applying 'COMPASS Designs'
filter to a large data set in Well Explorer

Release 5000.1.5

There were no additional EDT integration known issues for this release.

5000.1.13 Page 34 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.4

There were no additional EDT integration known issues for this release.

Release 5000.1.3

The following EDT integration known issues were reported for the 5000.1.3 release.

Defect No. Description

800234 General: On a 64-bit machine, when you try to configure the data source as you nor-
mally would in a 32-bit environment, the 32-bit ODBC drivers are not showing as a
valid Data Source on the login screens--only 64-bit drivers are shown. When you
launch an application, the Data Source drop-down does not include the ODBC
entries as expected. See screen shot with both the ODBC window and the login win-
dow displayed:

WORKAROUND: On 64-bit machines, you now go to a different location than in the

past to launch the ODBC Administration dialog box:

\Windows\SysWOW64\odbcad32.exe.

EDM currently works only with 32-bit drivers.

804750 EDT 5000.1.3 does not support COMPASS Live Link on Vista 32-bit or 64-bit
(because OpenWorks is not officially supported in these environments).

5000.1.13 Page 35 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

804781 Install: With SQL Server installed (not SQL Server 2005 Express) with the EDT
required EDM5000 Named Instance, when the user runs the EDT 5000.1.3 install,
an error is thrown with:
An instance with the same name is already installed on this computer. To proceed
with SQL Server Setup, provide a unique instance name.

SQL Server Express install then fails and is not installed.

804878 Install: On 64-bit systems, during SQL Server Express 2005 install, error message is
thrown citing known compatibility issue.

SQL Server Express 2005 will install correctly if you click Run Program button.

804913 VISTA 64 / W2K8 SERVER 64 -Inform user how to launch the correct version of the
ODBC administrator for creating 32-bit DSNs. EDT applications require 32-bit
DSNs. On 64-bit OS's such as Vista and Windows Server 2008, the ODBC Adminis-
trator launched by default is the 64-bit version. In addition, the ODBC administrator
exe (ODBCAD32.EXE) is called the same name for both the 32 and 64 bit versions.

When adding 32-bit DSNs on 64-bit OS's such as Vista and Windows Server 2008,
user should not use the Control Panel->Administrative Tools->Data Sources
(ODBC) and instead browse for and launch the ODBCAD32.EXE from their WIN-
DOWS\SYSWOW64 folder.

805460 Citrix XenApp: Drilling Data Migration hangs upon login with a Using default log file
message. Pressing OK on the message does not clear it, so the utility is effectively
hung and must be killed. WORKAROUND: Use a non-Citrix environment, or be the
Administrator.

5000.1.13 Page 36 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

805461 Citrix XenApp: Drilling Data Migration hangs upon exit with a Using default log file
message. Pressing OK on the message does not clear it, so the utility is effectively
hung and must be killed. WORKAROUND: Use a non-Citrix environment, or be the
Administrator.

805467 Citrix XenApp: EDM Publishing issues a file privileges error upon exit. This hap-
pens when logged in as a non-Administrator user. Pressing OK on the message
does not clear it, so the utility is effectively hung and must be killed. WORK-
AROUND: Use a non-Citrix environment, or be the Administrator.

806236 Install: With SQL Server 2008 installed (not SQL Server 2005 Express) on users
machine: during the install and afterwards, when you try to launch SSUTILS (SQL
Server Utility) from the Start Menu, an error is thrown with:

SSUtils
Must abort due to SQL Server version issues.
This may be expected in this environment.
Environment is
Windows Server 2008 - 64 Bit
SQL Server 2008 - 64 Bit installed

With SQL Server already installed, the 5000.1.3 install detects it and skips installing
SQL Server Express. When you try to launch SQL Server Utility, the utility tries to
launch with SQL Server 2008 and that fails with this error:

SQL Server Utility is not compatible with SQL Server 2008.

5000.1.13 Page 37 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

806348 Install: Vista systems: On Vista systems, running with User Access Control on, a
standard user is not able to run SQL Server Utility (SSUtils). Running SSUtils
prompts the user for an Administrator login (username/password). A standard user
is unable to run SSUtils without an Admin login with UAC enabled.

Release 5000.1.2

There were no additional EDT integration known issues for this release.

Release 5000.1.1

There were no additional EDT integration known issues for this release.

Release 5000.1

The following EDT integration known issues were reported for the 5000.1.0 release.

Defect No. Description

724913 Data Services: Some Data Services operations fail with long user names.

725544 Installation: None of the EDM/Drilling and Completions applications launch if instal-
lation folder contains Russian, Chinese character set.

726641 Installation: Uninstalling Drilling will prevent EDM Publishing Service from launching.

5000.1.13 Page 38 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

728737 Installation: Regarding 2003.14.1.0 to 2003.16 peaceful co-existence, 2003.16

installation renders 2003.14.1.0 COMPASS Report Manager non-functional after
uninstalling 2003.16.

729311 Installation: Real-Time View and Field/Office Data Transfer are not removed when
the single application install they are identified with is removed.

729667 Data Services: Long datum names causes Wellbore Copy/Paste to fail with error.

730135 Well Explorer: When working in the Well Explorer between applications (for exam-
ple, WELLPLAN and StressCheck), each application does not recognize the others
changes in the Change History until the tree is refreshed. Workaround: refresh the
tree before looking at Change History properties.

730283 Targets are not imported when a plan is imported over an existing plan.

761495 Catalogs imported with custom tubular properties will display INVALID in the custom
tubular properties field.

765781 Data Migration: The second application that is migrating data from R2000 within the
same session of the Data Migration Utility fails, throwing multiple errors. WORK-
AROUND: If the customer wants to migrate data from more than one legacy applica-
tion, they must close the Data Migration Utility in between migrations.

775560 On Windows 2003 Server (specifically systems running Citrix; not known if Citrix is
related or not), an error is thrown during the install with:

Landmark Engineer's Desktop 5000.1 (EDM) Installer I...

Error 1718.File C:\WINDOWS\Installer\2a9142e.msi was rejected by digital signa-
ture policy

WORKAROUND: see the EDT Drilling Installation Guides Troubleshooting section.

The workaround includes creation of a local Security policy to allow for these bad
digital signatures

777277 If you install full SQL Server 2005 with an instance NOT named EDM5000, database
will fail to attach because it is expecting an instance named EDM5000. To prevent
this error, please create an EDM5000 instance.

781795 Windows Vista OnlyIntegration issue: The connection to the SQL database via the
OpenWire Server panel in the Admin Utility fails. WORKAROUND: Do not run Open-
Wire software through the links in the COMPASS or WELLPLAN applications.

5000.1.13 Page 39 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

785258 Windows Authentication on Oracle: If you have Oracle Wallet (Used by the Open-
Works client in conjunction with the EDM to OpenWorks Link utility) installed on a cli-
ent, Windows Authentication for Oracle will not work.

786220 Install: EDM - Update the EDT installation to handle 64-bit OS when installing SQL
Server Express 2005.

5000.1.13 Page 40 of 283 July 2014

 OpenWells Software Release Notes

OpenWells Software

Enhancements Fixed Issues Known Issues

The 5000.1.13.0 release adds new and drops some existing supported platforms, plus
adds enhancements, fixes, and known issues from the 5000.1.0 through 5000.1.9
releases. Enhancements and bug fixes were made to the OpenWells software for the
5000.1.13.0 release.

During stabilization some OpenWells configuration files were added to the installation,
which were not included in the final database build. For this reason we recommend that
you run an import of EDM Site Configuration Files. Importing these files will address
cosmetic problems such as alignment and labels. Failing to import these files may cause
problems in the OpenWells WYSIWYG forms. For instructions on importing these files,
see the EDM Administration Utility online help.

OpenWells Enhancements and New Functionality

The OpenWells enhancements and new functionality for releases 5000.1.0 through
5000.1.13.0 are described below.

Release 5000.1.13

PROFILE and Data Analyzer Available in OpenWells Standalone Installer

The PROFILE and the Data Analyzer software are now part of the
OpenWells standalone installer.

Reporting by Workflow One Report Per Day at the Rig

To ensure accurate field reports, your supervisors need a system that is easy to
use and that matches their workflows.

OpenWells now supports reports that follow the fields workflow thus reducing the
time taken to enter the data and to look up that information in future operations.

Below is an example of a workflow-oriented report for drilling supervisors. This one

report now combines the details traditionally associated with individual daily
operations, pipe tally, casing and cementing reports for a typical shale well which
involves a conductor, surface, intermediate, and horizontal section.

5000.1.13 Page 41 of 283 July 2014

 OpenWells Software Release Notes

By default OpenWells comes with drilling, completions, and workover reports that
are configured for typical workflows at the rigsites. Additional workflow-oriented
reports can be created by administrators using the EDM Administration Utility tool.

Recording Multi-Well/Pad Operations

Recording costs, activity, bulk usage, and material transfers are unique challenges
for supervisors of multi-well or pad operations.

OpenWells now supports pad operations which simplify the entry of costs,
activity, bulk usage and material transfers for these types of operations.

To create a pad operation, right-click on a site node within the OpenWells hierarchy
and select New Pad Operation.

5000.1.13 Page 42 of 283 July 2014

 OpenWells Software Release Notes

Provide a name for the pad operation, the start date for the operation, the type of
operation via an event code and associate the wells which are part of the pad
operation to the list of associated wells.

A pad operation will then be created in the well explorer. With the pad operation
node selected, press the Create New Report button and select the Pad
Operation report from the list.

5000.1.13 Page 43 of 283 July 2014

 OpenWells Software Release Notes

The Pad Operation Report allows simplified entry for costs, activity and bulks
across multiple wells in a single report:

Costs

5000.1.13 Page 44 of 283 July 2014

 OpenWells Software Release Notes

Activity

Bulk Usage

5000.1.13 Page 45 of 283 July 2014

 OpenWells Software Release Notes

Material Transfers

New User Preferences

Print Directly To Excel

Users now have the option to print reports from OpenWells directly to Microsoft
Excel. Select Print Preview with Excel to enable this option from the Tools >
Report Setup menu.

5000.1.13 Page 46 of 283 July 2014

 OpenWells Software Release Notes

Once enabled, any printed report based on the traditional Crystal Reports system
will print directly to Microsoft Excel.

Preference to Default Report Date and to Enable/Disable Tool Tips

OpenWells users now have access to the following user preferences from the
Tools > Options menu.

The Default New Report Date allows users to specify the date for newly
created reports. Available options are Today and Day after previous report.
The Show report list tool tip preference allows users to enable/disable the tool
tip that appears in the OpenWells reports list window.

5000.1.13 Page 47 of 283 July 2014

 OpenWells Software Release Notes

Simplified Hole Section Entry

A new simplified entry format for hole sections is now available in OpenWells. This
screen is applicable to operations that do not require records of complex hole
section details necessary for engineering analysis.

Simplified Workflow When Partially Pulling a String

Supervisors now have the ability to designate a Partial Pull when pulling a portion
of an assembly.

After designating a partial pull, supervisors are presented with a list of all the
components that make up the tubing or rod string being pulled.

5000.1.13 Page 48 of 283 July 2014

 OpenWells Software Release Notes

Supervisors then select the deepest component pulled to complete the partial pull
workflow. OpenWells will then create a new string describing the components left
in hole and update the statuses of the original string and its components to indicate
they were pulled.

Simplified Entry of Stimulations & Improved WITSML 1.4.1 Support

Entry of multi-stage stimulations has been greatly simplified in this release of
OpenWells.

5000.1.13 Page 49 of 283 July 2014

 OpenWells Software Release Notes

General details, Fluids, Proppants, Chemicals and the treatment steps are now
grouped in one location for each treatment interval.

The new Import WITSML button now appears in the Fluids section of the Daily
Operations report, and in the General and the Treatments sections of the
Stimulation report. This button allows you to import WITSML objects into the report.

The ability to import stimulation jobs from vendors providing data in the WITSML
1.4.1 format has also been improved in this release.

Ease of Recording Bridge Plugs During a Stimulation Job by Supervisors

Supervisors can easily record bridge plug depths and the date those plugs were
removed as part of a stimulation job. The OpenWells wellbore schematic will
display the plugs based on the date and depths entered in the stimulation report.

5000.1.13 Page 50 of 283 July 2014

 OpenWells Software Release Notes

Supervisors can Enter and Review Lessons Learned Directly from the Daily
Operations Report
Entering and reviewing Lessons Learned is easier through the use of the new
lessons learned section available in the daily operations report. Instead of having
to move away from the operations report into a separate lessons dialog supervisors
can now enter all pertinent information directly into their morning report.

5000.1.13 Page 51 of 283 July 2014

 OpenWells Software Release Notes

Reduce Duplicate Entry Through the Use of Default Values

Supervisors will have less repetitive entry through the use of default values within
OpenWells. One such example is a scenario where the start date of the very first
hole section is the same date as the spud date for the well.

The configuration below shows the default and carry-down rules setup for the hole
sections spreadsheet. In this configuration the start date of the very first hole
section will default to the spud date as entered in the well properties. Subsequent
hole section records will use the carry down attribute, meaning that the second hole
sections start date will default to the previous hole sections end date.

5000.1.13 Page 52 of 283 July 2014

 OpenWells Software Release Notes

Default values can be configured for any spreadsheet column and are able to
reference information within a particular reports hierarchy, such as well and
wellbore properties.

Enter Durations Instead of from/to Times When Entering Time Summary into the
Morning Report
Supervisors can now save time by simply entering the duration of an activity
instead of having to type the from and to times for each time summary record. In
the example below the from time of the first activity defaults to the starting time
based on the reporting standard. The supervisor simply enters 12.5 hours in the
duration field and the to time is automatically updated. Supervisors can also
override the initial from time if operations for non 24 hour operations.

5000.1.13 Page 53 of 283 July 2014

 OpenWells Software Release Notes

Easily View Hole Sections and BHA Strings Using the today, wellbore, and all
Filters
Supervisors now have the ability to filter the BHAs and hole sections displayed in
the current morning report by using filters which will show the active hole section/
BHA for the day, all sections/BHAs in the wellbore or all sections/BHAs associated
with the well.

5000.1.13 Page 54 of 283 July 2014

 OpenWells Software Release Notes

Artificial Lift Equipment can be Documented From the Tubing/Rod String in the
Completions Morning Report
Supervisors are now able to enter a comprehensive summary of artificial lift
equipment in a single Completions Morning Report. The relevant details for
equipment such as an ESP are now available from the Wellbore Equipment report
and therefore supervisors no longer need to create a separate report specific to the
artificial lift system.

5000.1.13 Page 55 of 283 July 2014

 OpenWells Software Release Notes

New Microsoft Word Reports

This release of OpenWells includes three reports which use Microsoft Word
templates to define the layout of the report:

The Texas W2 Completions Report

The Texas W2 Completions report is available from the wellbore node in the
OpenWells well explorer.

5000.1.13 Page 56 of 283 July 2014

 OpenWells Software Release Notes

The Shale DDR Single Page Report

The Shale DDR Single Page report is a single page summary of drilling
operations available from daily drilling reports.

5000.1.13 Page 57 of 283 July 2014

 OpenWells Software Release Notes

The Shale Daily Drilling Report Full

The Shale Daily Drilling Report Full is a detailed summary of drilling operations
available from daily drilling reports.

New Report Well Quick Reference Sheet

A new printed report (Crystal) has been added to OpenWells that provides
workover supervisors with a quick summary of important information about a
completion prior to departing to a job site.

5000.1.13 Page 58 of 283 July 2014

 OpenWells Software Release Notes

Simplified Deployment for Field/Rig Laptops

Installation of field/rig laptops is greatly simplified with the OpenWells Standalone
installer. A single install routine now provides:

OpenWells
PROFILE
Data Analyzer
EDM Administration Utility

5000.1.13 Page 59 of 283 July 2014

 OpenWells Software Release Notes

A default SQL Server Express database

Database configuration required for Autosync Client

Simplified Autosync Installation using an Oracle EDM Database

Administrators no longer need to run Autosync server scripts when installing an
Oracle EDM database. All of the Autosync database configuration is now included
in the EDM database installation.

For Oracle installations the Autosync triggers are turned off by default so that
upgrades and database maintenance can be completed without having Autosync
detection. Once upgrade and maintenance work is complete Administrators can
simply enable the triggers.

Administrators can Easily Copy Configurations Between User Groups

Administrators have a greatly improved interface which provides them with the
ability to easily copy user group settings between groups of users.

5000.1.13 Page 60 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.12

Configure Printed Reports Using Microsoft Word

OpenWells now supports the use of Microsoft Word when editing and printing
reports. In the 5000.1.12 release OpenWells come with one pre-configured MS
Word report, the Texas-W2 Completions report (available from the wellbore node
in the Well Explorer).

OpenWells Module for Rushmore Reviews DPR, SPR and CPR Workbooks
Analysts tasked with preparing workbooks for the Rushmore Reviews Drilling,
Shale and Completions submission can now use the OpenWells Performance
Reviews module to automatically generate workbooks. Using this module
automates export of up to 95% of the DPR workbook, over 50% of the SPR
workbook and approximately 10% of the CPR workbook.

The OpenWells Performance Reviews module is downloaded separately from

OpenWells / EDT and is compatible with all supported R5000 versions of EDM.

Import Activity from the Pason Electronic Tour Sheet

Supervisors can save time and eliminate duplicate entry by importing operations
activity from a Pason Electron Tour Sheet.

5000.1.13 Page 61 of 283 July 2014

 OpenWells Software Release Notes

Selecting the Import button on the time summary data entry form provides the
option to import a Pason Tour Sheet.

After selecting the Electronic Tour Sheet supervisors are presented with a preview
of the available operations and can select which of those activity to import.

OpenWells Preconfigured for Shale Operations

OpenWells now comes preconfigured for typical shale operations.

5000.1.13 Page 62 of 283 July 2014

 OpenWells Software Release Notes

Typical configurations for Construction, Drilling, Completion, Maintenance,

Workover and Surface Equipment/Facilities event types have been assigned to the
Landmark Shale Supervisors user group, accessible in the Security node of
the EDM Administration utility.

Administrators also have a simplified interface for managing group configurations,

which has been broken into five tabs:

1. Use the General tab to define the group name, security level and tight
group associations.

2. Use the Tokens tab to define actions allowed by users in this group.

5000.1.13 Page 63 of 283 July 2014

 OpenWells Software Release Notes

3. Use the Report Visibility Tab to define the types of operations reports an
OpenWells user can create when working in a particular type of event.

5000.1.13 Page 64 of 283 July 2014

 OpenWells Software Release Notes

Note: This new feature in OpenWells defines the reports a user sees when they
select Create New Report, for example the above configuration results in the
following new report dialog in OpenWells:

5000.1.13 Page 65 of 283 July 2014

 OpenWells Software Release Notes

4. Use the Data Entry Forms tab to define the configuration layouts to be
associated with each type of report.

5000.1.13 Page 66 of 283 July 2014

 OpenWells Software Release Notes

5. Use the Canvas Assignments tab to associate event types and canvases
when configuring the interactive (Rocket) interface.

5000.1.13 Page 67 of 283 July 2014

 OpenWells Software Release Notes

Administrators can use the new Copy Group Settings, available in the right
click menu on a user group node, to apply some or all of the predefined shale
configuration to another user group, or to copy settings between any groups.

5000.1.13 Page 68 of 283 July 2014

 OpenWells Software Release Notes

OpenWells Available as a Standalone Install

Some deployment scenarios, such as rig site laptops, only require the OpenWells
application instead of the full EDT application suite.

In the 5000.1.12 release OpenWells is now available as a standalone installation

which saves time and effort during deployment. The standalone installation
includes everything required to run OpenWells, is 65% smaller than a full EDT
installation and can save 20 minutes per installation.

OpenWells Schematics is dependent on the PROFILE application; hence, ensure

that the PROFILE application is installed to be able to view the OpenWells
Schematics.

Synchronize a Single Report From OpenWells

Rig supervisors often have poor field communications and, to save time, wish to
transfer only their morning reports and wait until better communications to do a full
synchronization which transfers configuration settings in addition to the operations
reports.

Using the EDM Autosync button at the top of their operations reports supervisors
are now able to send only that report.

5000.1.13 Page 69 of 283 July 2014

 OpenWells Software Release Notes

Quickly Create Well Headers for Batch Operations

Administrators and field supervisors now have a New Well From Existing Well
menu option accessible from the site node in the well explorer. Using this wizard
users are able to quickly create one or more well headers using another well as a
template.

Reuse BHAs, Hole Sections and Casings When Entering Batch Operations
Drilling supervisors often have to enter similar/identical information for each well
during a batch drilling operation. Supervisors can now reuse the BHA, Hole Section
and Casing configuration between wells as they are constructed during a batch
operation.

5000.1.13 Page 70 of 283 July 2014

 OpenWells Software Release Notes

Supervisors can reuse a BHA run on the previous well by selecting Create New
From Copy in the BHA Run Summary (Drillstrings Section):

5000.1.13 Page 71 of 283 July 2014

 OpenWells Software Release Notes

Supervisors can reuse Hole Section Details from the previous well by selecting
Create New From Copy in the Hole Sections Spreadsheet:

5000.1.13 Page 72 of 283 July 2014

 OpenWells Software Release Notes

Supervisors can reuse casing details from the previous well by using the Copy
From Previous Casing button in the General Section of the Casing Report:

BHA & BIT Operations Update Automatically From Rotating Hours

OpenWells now populates the BHA and Bit Operations drilling hours with the
rotating hours recorded in the General Section of the Daily report in scenarios
where only one BHA/BIT Operation are recorded per day.

To enable this behavior the system setting AutoPopulateBHA must be set to YES
(default behavior is NO).

Release 5000.1.11

In order to show Jewelry components in the wellbore schematic, the Assembly

Name field (Casing and Wellbore Equipment, Jewelry spreadsheets) now pulls
from the MD_PK_COMP_TYPE table instead of the PK_CSGASS table.
Plunger-Lift operations can be recorded against wellbore equipment through a new
report: Plunger-Lift.
Slick Line operations can now be recorded in the Daily Operations report.

5000.1.13 Page 73 of 283 July 2014

 OpenWells Software Release Notes

The following performance improvements have been added to the OpenWells

application:
Users can expect improved performance when working with large numbers of
rig-event operations associations.
Improved performance of the OpenWells Preview Pane, as well as the option
to disable it by using the ShowPreviewPane system setting.
Performance and memory use in the Find functionality in OpenWells has been
improved.
Administrators can now disable the OpenWells pre-query and pre-load
features through using the EnableReportCaching system setting. This is
recommended for Citrix deployments.
The Copy Fluid to Daily Geology button has been added to the Daily Fluids section.
This button allows you to copy a fluid and it's properties into a Daily Geology report.
The new system setting, DEPTH_VS_DAYS_PLAN_BY_OPS, can be added to
the EDM Administration Utility. This setting allows administrators to choose how
the Depth vs Days graph (Todays Wells) is generated, when the Days on Location
option is selected.

By default, this graph calculates the planned curve using the planned operations,
Target Duration and MD To from the Well Planning report.

To calculate the planned curve using the Well Planning report, planned operations
Target Duration and the Daily report, hole section MD Base, the
DEPTH_VS_DAYS_PLAN_BY_OPS system setting must be added to the EDM
Administration Utility and set to "NO".

Release 5000.1.10

Data Entry
A number of additional reports and properties dialogs have been converted to the
new WYSIWYG layout. EDM Administrators can create their own WYSIWYG
forms or customize existing forms in the EDM Administration Utility, and assign
them to well site canvases.

WYSIWYG forms help increase data entry ease and efficiency. Each WYSIWYG
form can also be printed from the form window and will print out exactly as it
appears in the data entry window.

5000.1.13 Page 74 of 283 July 2014

 OpenWells Software Release Notes

The following reports and dialogs now support WYSIWYG layouts:

Well Properties* Daily Operations Casing

Create Well* General Cementing
Wellbore Properties* Time Summary General Work*
Create Wellbore* Costs Kick*
Event Properties* Safety Material Transfer*
Create Event* NPT Perforation*
Rig Properties Environmental Pressure Survey*
Rig Operations Fluid Handling Stimulation*
Rig Equipment and Weather Wellbore Equipment*
Operations forms Mud
Anchor Surveys
BOP* Leak Off Tests
Boiler Bulk Inventory
Centrifuge Personnel
Degasser Support Craft
Hydrocyclone Valve Tests
Motor Rig Deck Log
Pit Hole Sections
Pump BHA Runs
Riser Work Strings
Shaker Daily Completions*
* indicates items that are new for the 5000.1.10 release

Figure 3: Cementing Report in WYSIWYG layout

5000.1.13 Page 75 of 283 July 2014

 OpenWells Software Release Notes

Figure 4: Well Properties link and WYSIWYG layout

EDM Administrators can create new WYSIWYG forms, customize existing forms,
and define which forms are accessible on an Interactive Well Site canvas, based
on EDM Group membership and Event type.

Create Well, Wellbore and Event in Interactive Well Site

The Well, Wellbore and Event can now be created from the Interactive Well Site
interface. Additionally, new WYSIWYG forms have been configured to speed up
the process of creating a Well, Wellbore and Event.

Create a Well

The new Create Well feature can be found on the Find Well dialog when the Select
Well button is selected in the ribbon.

When this button is selected the user is prompted to select the Company, Project
and Site where the Well is to be created.

The default WYSIWYG form has been designed to allow you to enter a summary
of information that will get you started quickly and easily from one location. In
addition to defining the Well, Datum, and Location this form also allows you to
create your Wellbore and Event with minimal data entry.

5000.1.13 Page 76 of 283 July 2014

 OpenWells Software Release Notes

Figure 5: Create Well button on Find Well Dialog

Figure 6: Create Well WYSIWYG form

5000.1.13 Page 77 of 283 July 2014

 OpenWells Software Release Notes

Create a Wellbore and an Event

The new Create Wellbore and Create Event features can both be found on the
Select Wellbore and Event dialog when the Select Wellbore/Event button is
selected in the ribbon.

These features now each include WYSIWYG forms that are specifically designed
to speed up the process of creating the Wellbore and creating the Event. This is
accomplished by consolidating data entry onto a single screen.

Figure 7: Create Wellbore and Create Event buttons

5000.1.13 Page 78 of 283 July 2014

 OpenWells Software Release Notes

Figure 8: Create Wellbore and Create Event forms

Stimulations
A new Stimulations WYSIWYG form has been designed to simplify the workflow for
entering stimulations data. This new workflow combines many of the previously
separate sections of the Stimulation report. A user can now enter the Treatment
and define the Fluids, Chemicals, Proppants and Steps for the individual
Treatment. In addition Fluids and Proppants defined in each Step, can now be
manually pushed out to the Fluids and Proppants tables. To avoid duplication of
data in these spreadsheets, Fluids are pushed by Fluid Name and Proppants are
pushed by Proppant Type and Concentration.

The Stimulations form is accessed from the Activities link on the Interactive Well
Site interface.

The workflow is outlined below:

1. Open the Stimulations WYSIWYG form and enter general information about
the stimulation job.

2. Select the Record Treatment button to enter the first treatment and enter data
on the treatment.

5000.1.13 Page 79 of 283 July 2014

 OpenWells Software Release Notes

3. Select the Fluids link in the treatment spreadsheet and begin recording
information about the fluids used in the treatment.

4. Select the Chemicals and Proppants links to record information on the

chemicals and proppants used during the treatment.

5. Optionally, select the Steps link to record each step of the pumping schedule
and any fluids used during this phase.

Select the Update Fluid and Proppant Summary button to push the fluids
and proppants defined into the Fluid and Proppant spreadsheets. Using this
button will overwrite data entered in the Fluids and Proppant spreadsheet. The
data is pushed based on the Fluid Name and Proppant Type/Concentration, so
duplicates are not created.

Figure 9: Stimulations WYSIWYG form

5000.1.13 Page 80 of 283 July 2014

 OpenWells Software Release Notes

Tests
The following new fields have been added to the Test report. These fields can be
configured in the layout manager for quick and error free data entry.

General/Test Summary Section

The following fields are now available in the General and Test Summary sections.

Table Field Field Name

CD_TEST total_load_to_recover Total load to recover
CD_TEST previous_day_oil_cumulative Previous day oil cumulative
CD_TEST percent_recovered Percent recovered
CD_TEST previous_day_water_cumulative Previous day water cumulative
CD_TEST current_load_to_recover Current load to recover

Figure 10: Test General and Test Summary sections

Test Spreadsheet for Flowing Well Test

The following fields are now available in the Test Spreadsheet, when the Flowing
Well test type is selected. By default, these fields appear in the details area of the
spreadsheet, but can be added to the spreadsheet by the EDM Administrator for
easy data entry.

Table Field Field Name

CD_TEST_FLOW load_water Load water
CD_TEST_FLOW load_water_cumulative Load water cumulative
CD_TEST_FLOW load_water_total_cumulative Load water total cumulative
CD_TEST_FLOW load_to_recover Load to recover

5000.1.13 Page 81 of 283 July 2014

 OpenWells Software Release Notes

Table Field Field Name

CD_TEST_FLOW percent_recovered Percent recovered
CD_TEST_FLOW total_oil_per_day Total oil per day
CD_TEST_FLOW oil_cumulative Oil cumulative
CD_TEST_FLOW total_oil_cumulative Total oil cumulative
CD_TEST_FLOW differential_pressure Differential Pressure
CD_TEST_FLOW flow_line_temperature Flow line temperature

Figure 11: Test Spreadsheet

5000.1.13 Page 82 of 283 July 2014

 OpenWells Software Release Notes

Stimulations to Flowback Workflow

During a stimulations job, fluids are pumped into the well. These fluids must
subsequently be recovered, so an accurate reading of the formation fluids and the
well's production rate can be captured. As fluids are unloaded from the well, the
fluid volumes in the Test report are subtracted from the Total load to recover. Once
the Total load to recover reaches zero, the readings taken downhole more
accurately reflect the formation fluids and not the stimulation fluids that were
pumped downhole.

This workflow requires the following data entry:

Convert the Stimulations Total fluid pumped value

(DM_STIM_JOB.total_fluid_pumped) to the same unit used by the Test report's
Total load to recover field (CD_TEST.total_load_to_recover). For example, gal
to bbls or L to m3.
Copy the converted value for Stimulation's Total fluid pumped into the Test
report's Total load to recover field (CD_TEST.total_load_to_recover).
The Test start date/time must be entered in order for the application to
determine the previous test report and calculate the previous day's cumulative
oil, water and load to recover.

Activities on the Rig Enter in OpenWells software

Begin the Stimulation Job Create Stimulation Report and enter

Job start date/time

Pump stimulation fluids Enter treatment data

downhole

End Stimulation Job Enter Job end date/time

Create Test report

Convert Total fluid vol in Stimulation report
from current unit (e.g., gal or L) to unit used
Begin Flowback
for Total load to recover in Test report (e.g.,
bbls or m3).
Enter converted value of Total fluid vol
in the Test reports Total load to recover
Test report.

Run Tests Record readings and fluid volumes

Monitor Total load to recover

Test result reflect actual As Total load to recover reaches zero

formation fluids

5000.1.13 Page 83 of 283 July 2014

 OpenWells Software Release Notes

Lessons Learned
A number of new fields have been added to the Lessons Learned area to improve
on knowledge management gathering. These changes are outlined below.

General Tab

The following fields are now available in the General tab.

Table Field Field Name

CD_LESSON drilling_supervisor Drilling supervisor
CD_LESSON super1_name Super1 name
CD_LESSON super2_name Super2 name
CD_LESSON responsible_party Responsible party
CD_LESSON vendor_name Vendor name
CD_LESSON drilling_program_reference Drilling plan/prog. ref
CD_LESSON is_externally_reported Externally reported check box
CD_LESSON external_reference External reference
CD_LESSON is_change_management_required Change mgmt. required check box
CD_LESSON change_management_reference Change mgmt. reference
CD_LESSON lesson_review_date Lesson review date
CD_LESSON lesson_approval_date Lesson approval date
CD_LESSON event_no Event no.
CD_LESSON event_type Event type

5000.1.13 Page 84 of 283 July 2014

 OpenWells Software Release Notes

Figure 12: Lessons Learned General tab

Lesson Tab

The following fields are now available in the Lesson tab.

Table Field Field Name

CD_LESSON lesson_purpose Lesson purpose
CD_LESSON step_no Step no.
CD_LESSON actual_value Actual value
CD_LESSON expected_outcome Expected outcome
CD_LESSON potential_value Potential value

5000.1.13 Page 85 of 283 July 2014

 OpenWells Software Release Notes

Figure 13: Lessons Learned Lessons tab

Status Tab

A new tab has been added to support a historical record of a lessons status.

Table Field Field Name

CD_LESSON_STATUS_HISTORY status Status
CD_LESSON_STATUS_HISTORY status_comments Comments
CD_LESSON_STATUS_HISTORY status_date Date/Time
CD_LESSON_STATUS_HISTORY update_person Updated by

5000.1.13 Page 86 of 283 July 2014

 OpenWells Software Release Notes

Figure 14: Lessons Learned Status tab

Discussion Tab

The following fields are now available in the Discussion tab.

Table Field Field Name

CD_LESSON_DISCUSSION user_defined_date1 Configurable date field
CD_LESSON_DISCUSSION user_defined_date2 Configurable date field
CD_LESSON_DISCUSSION user_defined_text1 Configurable text field
CD_LESSON_DISCUSSION user_defined_text2 Configurable text field
CD_LESSON_DISCUSSION user_defined_text3 Configurable text field

Figure 15: Lessons Learned Discussion tab

Actions Tab

A new tab has been added to support a historical record of a actions that have
taken place related to a lesson

Table Field Field Name

CD_LESSON_ACTION_STATUS date_submitted Date submitted

5000.1.13 Page 87 of 283 July 2014

 OpenWells Software Release Notes

Table Field Field Name

CD_LESSON_ACTION_STATUS responsible_party Responsible party
CD_LESSON_ACTION_STATUS action_reference Action reference
CD_LESSON_ACTION_STATUS criticality_priority Critical priority
CD_LESSON_ACTION_STATUS percent_complete Percent complete
CD_LESSON_ACTION_STATUS date_due Date due
CD_LESSON_ACTION_STATUS action_comments Action Comments
CD_LESSON_ACTION_STATUS date_closed Date closed
CD_LESSON_ACTION_STATUS closed_by Closed by
CD_LESSON_ACTION_STATUS close_out_comments Close out comments
CD_LESSON_ACTION_STATUS user_defined_date1 Configurable date field
CD_LESSON_ACTION_STATUS user_defined_date2 Configurable date field
CD_LESSON_ACTION_STATUS user_defined_text1 Configurable text field
CD_LESSON_ACTION_STATUS user_defined_text2 Configurable text field
CD_LESSON_ACTION_STATUS user_defined_text3 Configurable text field

Figure 16: Lessons Learned Actions tab

5000.1.13 Page 88 of 283 July 2014

 OpenWells Software Release Notes

Bibliography Tab

The following fields are now available in the Bibliography tab.

Table Field Field Name

CD_LESSON_BIBLIOGRAPHY user_defined_date1 Configurable date field
CD_LESSON_BIBLIOGRAPHY user_defined_date2 Configurable date field
CD_LESSON_BIBLIOGRAPHY user_defined_text1 Configurable text field
CD_LESSON_BIBLIOGRAPHY user_defined_text2 Configurable text field
CD_LESSON_BIBLIOGRAPHY user_defined_text3 Configurable text field

Figure 17: Lessons Learned Bibliography tab

5000.1.13 Page 89 of 283 July 2014

 OpenWells Software Release Notes

Todays Wells
The Todays Wells feature can now be launched from the Interactive Well Sites
ribbon. This feature allows engineers and rig managers to quickly determine the
status of Wells they are involved with from one simplified location.

Figure 18: Todays Wells button

Release 5000.1.9

All enhancements from the OpenWells 5000.1.7.1 release have been ported to the
5000.1.9 release.

Conventional Pump Assemblies - When creating a Conventional Pump

report, the application will give the option to pull or pull and rerun currently
installed Rod String assemblies.
Dual Currency - Dual Currency support has be improved to make it easier to
identify the "alternate" currency that data has been entered in. This includes the

5000.1.13 Page 90 of 283 July 2014

 OpenWells Software Release Notes

addition of an Alternate Cost Class in the Unit System Editor and the addition
of alternate currency fields.
Support Craft - The Support Craft section of the Daily Operations report has
been redesigned to improve workflows and previous limitations, as well as to
only show crafts that are active on a given day. Details of a craft are now
managed in a dialog box and data recorded in the section now represents the
craft's presence onsite for that reporting day. Deleting a row in the spreadsheet
no longer deletes the Craft itself; it only deletes the record of its presence at the
wellsite on that day.
Risers - Risers have been added to the Rig Equipment section to track the
installation and removal of a riser. In addition, a Riser Operations section has
been added to the Daily Operations report to record operations performed on
the riser. For more information, see Riser Properties and Riser Data topics.
Production Equipment Failures Inspection Details - A new section has been
added to the Production Equipment Failures report to record Equipment
Inspections. For more information, see the Inspection topic.
Improved Spreadsheet Functionality - New functionality has been added to
spreadsheets in OpenWells. Users can now select consecutive and non-
consecutive rows for cutting and copying. In addition, rows can now be Inserted
above the selected row. For more information, see the Spreadsheet Cut/Copy/
Paste topic.
Anchor and Support Craft Carryover - A carryover feature has been added
to the Anchor operations, allowing users to automatically copy the operational
data and support crafts to the next day's report. For more information, see the
Anchor Data and Support Craft Data topics.
New Interactive Well Site Features - New features include: Back and Forward
buttons have been added, allowing users to navigate through days
consecutively (Navigate Buttons); The Date Selector displays dates containing
report data in bold (Select Date).
Pipe Tally Attach Section - The Attach Section workflow in the Pipe Tally
report has been improved to allow users to select consecutive and non-
consecutive pipe to attach to a section. For more information, see the Run Tally
and Off Load Tally topics.
Daily Cost Total Cost (Cost Summary) Button - The Total Cost button's
functionality has been changed to clearly identify costs based on the line item
or spreadsheet cell selected. For more information, see the Daily Cost and Cost
Data topics.
Data Validation Improvements these include: data validated prior to being
saved to the database; Mandatory Field Loop fixed; new Script tab; script errors
and timeout; new text format field; reg expression system setting.

5000.1.13 Page 91 of 283 July 2014

 OpenWells Software Release Notes

Data Validation Improvements - Improvements have been made to the

OpenWells Data Validation feature. These changes include:
Data is now validated prior to being saved to the database
Rules can now be defined using JavaScript
Regular Expressions can be used in a rule to validate text formats
During validation, if a mandatory field fails the user now has the option
to either fix the field or close the form without saving changes

For more information see the Data Validation application's online help.

WITSML 1.4.1 Standards - WITSML Import of OpenWells Stimulations tables

are now compatible with both the WITSML 1.3.1 and 1.4.1 standards. For more
information, see the Working with WITSML Objects in SUMMIT topic.

Release 5000.1.8

There were no enhancements to OpenWells for this release.

Release 5000.1.7

The Interactive Well Site

The OpenWells application can now be launched to an interactive data entry area
called the Interactive Well Site. This new view of OpenWells has been designed to
enhance and simplify data entry at the Rig site.

The Interactive Well Site simplifies data entry for users at the Rig Site by providing
intuitive data entry that is consistent with real-world activity at a well, lending itself
to both trained and untrained staff. Users no longer need to understand the
OpenWells Well Explorer tree as they can now access data entry areas in one or
two clicks.

The Interactive Well Site:

reduces data entry time and duplication

applies surface canvases based on whether the rig is a land rig or an offshore
rig and for offshore rigs the Rig Type
subsurface canvases are based on the Canvas assigned to Event Types
creates Classic Reports in the background so users do not have to concern
themselves with the Well Explorer tree

5000.1.13 Page 92 of 283 July 2014

 OpenWells Software Release Notes

provides direct access to Well, Wellbore, Event and Rig properties

clearly displays the current Day's start and end time as defined by the Reporting
Standard
uses WYSIWYG (What You See Is What You Get) and Classic Data Entry
forms
WYSIWYG forms are now customizable in the EDM Administration Utility
contains visual indicators for where data has been entered and what data entry
is completed on a given day
provides users with easily accessible buttons to begin ( ) or end ( )
Operations
supports schematics, data validation, batch output report printing and XML data
import

Figure 19: The Interactive Well Site showing an Offshore Rig

5000.1.13 Page 93 of 283 July 2014

 OpenWells Software Release Notes

Canvases

The Interactive Well Site presents OpenWells data on a graphical interface called
a Canvas. Each Canvas is made up of a surface image, a subsurface image and
a number of links to data entry areas, such as Properties dialog boxes, WYSIWYG
forms and Classic Data Entry forms.

A number of pre-configured canvases are shipped with the EDM database.

Administrators can also create their own in the EDM Administration Utility.
Canvases are assigned to EDM Groups based on Event Type.

The Interactive Well Site uses one of four surface images to represent a well site:
Land, Semi-submersible, Jackup and Drillship.

Land Rig Jackup Rig

Semi-Submersible Rig Drillship Rig

Figure 20: Interactive Well Site Canvases

The Land image appears if the Well's Datum is set to Land (i.e., the Offshore
checkbox is not selected in the Well Properties Depth Reference tab).
The Semi-submersible image appears if the Well's Datum is set to Offshore.
The Drillship image appears on offshore wells if the Rig Type (in the Rig
Properties) selected is Drillship.
The Jackup image appears on offshore wells if the Rig Type selected is Jackup.

5000.1.13 Page 94 of 283 July 2014

 OpenWells Software Release Notes

From the Rig picture the user can select the subsurface image, in the bottom left
corner, to transition downhole to the wellbore.

Click to transition
downhole

Figure 21: Transition downhole

One of the three subsurface wellbore images appear based on the canvas
configuration and EDM Group assignment to the Event Type.

Drilling Subsurface

Completions Subsurface Workover Subsurface

Figure 22: Interactive Well Site Downhole canvases

5000.1.13 Page 95 of 283 July 2014

 OpenWells Software Release Notes

Toolbar

The toolbar running down the left side of the Interactive Well Site
provides users with easy access to navigation, as well as, quick
access to a number of OpenWells features.

Select Date Button - Quickly navigate to a specified reporting

day. This button also displays the currently selected date
Select Well Button - Search for and select a Well
Wellbore/Event Button - Select the Wellbore and Event
Start and Finish Buttons - Begin or End Operations
Wellbore Schematic Button - Display the Wellbore
Schematic
Print Reports Button - Print one or more Output Reports
AFE and Plan Buttons - Open the Cost Estimate and AFE or
Well Planning reports
Refresh Button - Get any recent changes made to the
EDM database
Data Validation Button - Validate data by running a set of
rules against it
Import Button - Import data from an EDM data transfer file
(edm.XML, rig.XML or .XML).
Options Button - configure the mode OpenWells launches in,
Date Preference in the Interactive Well Site, Auto Catalog
selection and view SAM connection information.
OpenWells Classic Button - Switch the application to OpenWells Classic
mode

5000.1.13 Page 96 of 283 July 2014

 OpenWells Software Release Notes

Properties

The current Well, Wellbore, Event, Rig, Rig On Location date and the reporting
interval are displayed at the top left corner of the surface image. The items listed
in blue are also links that open various pages when selected. The Well, Wellbore,
Event and Rig links open their respective Properties dialog boxes and the On
Location link opens the Rig Operations dialog box.

Figure 23: Identify the current context

Data Entry Links

Each canvas contains links to WYSIWYG and Report forms where data is entered
by the users. Clicking on a link displays a form where data can be entered on the
item. Forms can be opened in the following ways:

click one of the colored images

Figure 24: Select the Cement truck to open the Cementing Details form

5000.1.13 Page 97 of 283 July 2014

 OpenWells Software Release Notes

click the blue Activities link and then select the activity type

Figure 25: Select the Activities link to access WYSIWYG and Report entry forms for
numerous well site activities

click the blue Daily Operations link and then select the daily activity type

Figure 26: Select the Daily Operations link to access WYSIWYG entry forms for a
number of Daily activities

A complete listing of clickable items is available in the OpenWells online help topic,
Image Map.

Data Indicators

The Surface and subsurface canvases also contain visual indicators showing
users what data has been entered and what data entry is complete on a given day.

5000.1.13 Page 98 of 283 July 2014

 OpenWells Software Release Notes

A yellow checkmark appears next to an item on the Interactive Well Site to indicate
that data exists on the current day for the item. Once all data has been entered and
reviewed, activate the Section Complete checkbox located at the top of the form.
The yellow checkmark turns green to indicate that the data entered today for the
item is complete.

Figure 27: Yellow checkmarks indicating data exists and green checkmarks indicating
data is complete

Data Entry

WYSIWYG and other forms are now only one or two clicks away from the main
Canvas window.

EDM Administrators can create their own WYSIWYG forms in the EDM
Administration Utility and assign them to canvases. For the 5000.1.7.0 release, the
creation of WYSIWYG forms is limited to certain database tables. Contact
Landmark Support for more information.

WYSIWYG forms help increase data entry ease and efficiency. Each WYSIWYG
form can also be printed from the form window and will print out exactly as it is
appears in the data entry window.

5000.1.13 Page 99 of 283 July 2014

 OpenWells Software Release Notes

Figure 28: Sample of the BHA Run WYSIWYG Form including the Wellbore Sche-
matic

Synchronize Data

EDM AutoSync has been fully integrated into the Interactive Well Site. Data can
now be synchronized between the Rig and Regional Office via EDM AutoSync with
a single-click the Satellite Dish found on each of the Canvases.

Figure 29: AutoSync Satellite Dish

5000.1.13 Page 100 of 283 July 2014

 OpenWells Software Release Notes

New Select Partners Button

A new Select Partners button allows users to select Partners and Contacts to add
to the Associated Partners spreadsheet. This button is available in the Event,
Wellbore and Well Properties dialog boxes.

Figure 30: Select Partners feature

New Copy Plan Formations Button

A new Copy Plan Formations button has been added to the Wellbore Properties
Formation tab. This button allows users to copy formations from planned designs
created in COMPASS for use by the Wellbore. This feature overwrites any
existing formations. During the copy process, if the application detects that a
formation is already associated with a report, the copy process is canceled.

Figure 31: Copy Planned Formations feature

5000.1.13 Page 101 of 283 July 2014

 OpenWells Software Release Notes

Wellbore Status Notes

A new column has been added to the Wellbore Status spreadsheet in the Wellbore
Properties dialog boxes.

Figure 32: New Notes column

Close Rig Event Association

When an Event is closed (i.e., its End Date is entered), the application prompts the
user to close the associated Rig Operation.

Final Report Checkbox Populates Event End Date

When the Final Report checkbox is activated in the Daily Operations General
section, the Daily Report's Date is copied to the Event End Date field.

This feature only works if the system setting SetEndDatesToFinalReport is set to

YES in the EDM Administration Utility.

Figure 33: Final Report / Event End Date feature

Update Time Summary Button

To reduce data entry time and duplication, the Update Time Summary button has
been added to the OpenWells application. This button allows users to push data
entered in specific reports directly into a new row in the Time Summary
spreadsheet.

5000.1.13 Page 102 of 283 July 2014

 OpenWells Software Release Notes

Using the EDM Administration Utilitys Layout Manager, Administrators can

configure the source fields where the data will be entered and the destination
DM_ACTIVITY fields the data will be pushed to. The Update Time Summary button
is available in the following areas:

Classic Entry Form General Section: Casing, Cementing, Perforation,

Stimulations and Wellbore Equipment
WYSIWYG Forms: Casing, Cementing and Stimulations

1. Enter data and select the Update Time Summary button.

2. Verify the data has been entered correctly.

3. The date is pushed to the

Time Summary spreadsheet.
The link will open the reot.

Figure 34: Update Time Summary Feature

New Time Summary Fields

Three new fields have been added to the Time Summary spreadsheet to record
descriptions of Class, Code and Subcode. The fields are Class Description, Code
Description and Subcode Description. These fields are not included in the default
layouts and must be added in the OpenWells Layout Manager.

5000.1.13 Page 103 of 283 July 2014

 OpenWells Software Release Notes

Calculation Change in Time Summary

The Total Time field now calculates the total Duration for the selected Activity
Group Filter, instead of for all Critical Path rows regardless of the selected Activity
Group Filter.

Total Time for All Groups

Total Time for Group A only when selected in Filter

Figure 35: Time Summary Total Activity Time Calculation

Personnel Data Entry Improvements

The layout of the Personnel section in the Daily Operations report and WYSIWYG
has changed to improve daily workflows and previous limitations. Company and
Employee information is now managed from in a separate dialog box.

Data recorded in the Personnel section now correctly represents the Company
or Personnel's presence on site for that reporting day.
Deleting a row in the Company Onsite or Personnel Onsite tabs no longer
deletes the Company or Personnel; it only deletes the record of their presence
at the wellsite on that day.
A new Edit Company/Personnel button allows users with the correct
permissions to add, modify or delete the list of available Companies and
Employees. This button also allows users to copy Companies and Employees
from other existing Events.

5000.1.13 Page 104 of 283 July 2014

 OpenWells Software Release Notes

Figure 36: Edit Company/Personnel feature

A new Select Company/Personnel button allows users to select a number of

Companies and Employees and adds them to the Companies Onsite and
People On Board spreadsheets.

Figure 37: Company/Personnel quick picker

BHA Length Calculation Change

The BHA Length calculation has been changed to include Drill Pipe located
between other components in the string. The BHA Length is now calculated as
follows:

BHA Length = all Component Lengths - the Drill Pipe Component Length at
the top of the string

5000.1.13 Page 105 of 283 July 2014

 OpenWells Software Release Notes

Only the first section of Drill Pipe located at the top of the string is not included in
the calculation.

Drillpipe not used

in BHA Length Calc.

Drillpipe used
in BHA Length Calc.

Figure 38: BHA Length Calculation and Drill Pipe components

New Bit Operations Calculated Fields

Three new Calculated Fields added to Bit Operations table DM_BIT_OP: Guided
Percent, Op Sum Hours and Op Sum Progress.

Bit Details Total Flow Area Calculation

The TFA (Total Flow Area) is now an editable calculated field. By default, the field
is calculated, but a user can override the calculation by editing the field directly. If
the user changes fields that this calculation depends on or selects the calculated
field and clicks the Calculated Current Field button in the toolbar, the application
re-calculates the TFA.

Flip Component Order Feature

A new button Flip BHA (or Flip Order) has been added to reverses the order of the
Components in the spreadsheet, as well as, in the database. This button helps
users correct a simple mistake without having to manually move each component
or reenter their data. The Flip BHA button is available on the Components tab of
the Drillstrings section and the Work Strings sections in the Daily Operations,
Coring, Logging, Perforation, Sidewall Coring and Stimulations forms.

5000.1.13 Page 106 of 283 July 2014

 OpenWells Software Release Notes

1. Component Order Before

2. Select Flip BHA Button

3. Component Order After

Figure 39: Flip BHA (or Flip Order) Button

Non Productive Time (NPT) Administration Tokens

New tokens have been added to the EDM Administration Utility to allow
administrators to restrict a user's rights to add, edit, view, delete and lock NPT data.
The tokens are:

OpenWells.NPT.add,
OpenWells.NPT.delete,
OpenWells.NPT.edit,
OpenWells.NPT.view
EDM.Explorer.NPT.lock.

Kick Tests
A new area has been added to the Daily Operations Report's Safety section. This
section allows users to records Kick Tests on a daily basis.

5000.1.13 Page 107 of 283 July 2014

 OpenWells Software Release Notes

Fluid Produced Spreadsheet

A new spreadsheet has been added to the Fluid Handling tab to record fluids
produced. Two new calculated fields: Mud Produced and Mud Discharge have
been added to the Fluid Losses tab. These new items only appear if the
FluidProduced System Setting is set to YES. For information on the system setting,
see the EDM Administration Utility online help.

Job Activity Section

A new Job Activity section has been added to the Coring, Logging, Perforation,
Sidewall Coring and Stimulation reports. This new section allows users to enter
specific Time Summary operation details directly in the report form.

Work Strings Section

A new Work String section has been added to the Coring, Logging, Perforation,
Sidewall Coring and Stimulations areas. These sections allows users to enter
details of the assemblies run downhole directly in the related report. The Work
String section operates in the same way as the Daily BHA Run area.

Cement Plug for Open Hole

The Casing Assembly picklist includes a None item for all Cement Job Types.
This item allows users to create a cement job that is not associated to the Casing
assembly string.

Any Job Type selected

-None- option in Assembly picklist

Figure 40: No Casing Assembly associated with Cement Job

Cement Plug Drill Out Date

A checkbox and date field have been added to the Cement report to record the date
a cement plug was drilled out.

5000.1.13 Page 108 of 283 July 2014

 OpenWells Software Release Notes

Cement Intermediate Circulations Section

A new section has been added to the Cementing report to record circulation
operations during the cementing.

Calculate Cement Stage Top/Base MD based on the Pumping Schedule

Two new system settings have been added to the EDM Administration Utility
(TopBaseSlurryAndTests and TopBaseSlurryAndTestsCodes), which determine
the Top MD and Base MD of a Cement Stage, based on the Fluids entered in the
Pumping Schedule.

Responsible Parties Section

A new section has been added to the Fishing Report to identify those responsible
for the fishing operation. These names can be carried over from one Fishing report
to the next.

Results Section
A new section has been added to the Fishing Report to record the outcome of the
fishing operation.

Auto Save Feature

A new AutoSave system setting has been added to allow Administrators to sets the
number of minutes between the OpenWells Reports saving automatically. This
setting is only applicable to OpenWells Classic mode. It does not apply to the
Interactive Well Site. For more information see the EDM Administration Utility
online help.

Figure 41: AutoSave System Setting

Internal Picklist Configuration Additions

Prior to this release, Internal Picklists were not editable by Administrator or users.
Now users with appropriate permission to the Data Dictionary Picklist
configuration, can add data to supplement the picklist

5000.1.13 Page 109 of 283 July 2014

 OpenWells Software Release Notes

The following rules apply to internal picklists:

Table Name and Picklist Type cannot be changed

Filter clauses cannot be added
And Filter clauses can be added. The And Filter is applied after the Filter
Clause and any internal filters
Note: The And Filter Clause may be grayed out for any internal picklists,
whose internal filtering is too complicated to run additional SQL queries
against.
Picklist Options cannot be changed
Columns displayed in the drop-down defined by the application cannot
be edited or removed
New Columns Displayed in the drop-down can be added and deleted
Fields Updated defined by the application cannot be edited or removed
New Fields Updated can be added and edited

And Filter Clause

Add, Delete, Sort Internal Picklist

Figure 42: Internal Picklist Changes

New Hole Plan Calculations

Four new calculations have been added to the Hole Plan spreadsheet in the Well
Planning report: Cum Target Duration, Cum AFE Duration, Cum AFE Cost and
Cum Target Cost. Cum Target Duration.

5000.1.13 Page 110 of 283 July 2014

 OpenWells Software Release Notes

Figure 43: New Hole Plan calculated fields

Access Online Help from a Server

When OpenWells is installed using the Client installation, the application now
automatically calls the Online Help from the Server location. During the installation
the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Landmark Graphics
Corporation\EDT\<version number>\Installation Type is checked to verify if the
installation mode is client or local. If it is Client the registry key retrieved is
ServerFolder. Otherwise, the registry key retrieved is Installation Folder.

Release 5000.1.6

There were no enhancements to OpenWells software for this release.

Release 5000.1.5

Multiple MAASP Status Readings - The OpenWells application now allows Well
Engineers to record the changing state of Maximum Allowable Annular Surface
Pressure (MAASP) values over the life cycle of a Well.

The new spreadsheet fields use a different EDM table (CD_WELL_MAASP)

than the old fields (CD_WELL) appearing in the General tab.
Approval Process - The OpenWells and PROFILE applications now includes a
feature to mark and identify Wells, Events and Reports that have gone through an

5000.1.13 Page 111 of 283 July 2014

 OpenWells Software Release Notes

approval process. The approval process preserves and locks the information
recorded about the Well/Event/Report at the time of approval.
AutoSync Well Assignment - Defined OpenWells' users are now able to assign
Wells to an AutoSync Client for bi-directional updates between Rig and Regional
EDM databases.
New Report Manager Version - A new Report Manager version, which will reduce
memory consumption, increase report generation speed, and contains various
other improvements.

Multiple MAASP Status Readings

The OpenWells application now allows Well Engineers to record the changing
state of Maximum Allowable Annular Surface Pressure (MAASP) values over the
life cycle of a Well. Recording changes to MAASP on a Well creates a history that
can be used in recognizing any concerning trends in changes to these pressure
values.

This new feature has been added as a spreadsheet in the Well Properties - Status
tab.

The old MAASP entry fields are still available in the Well Properties - General tab
and should be hidden or made read-only by the EDM Administrator as not to
confuse users. If MAASP values have been entered in the General tab entry fields,
a row is automatically be created in the MAASP spreadsheet.

The new spreadsheet fields use a different EDM table (CD_WELL_MAASP)

than the old fields (CD_WELL) appearing in the General tab.

5000.1.13 Page 112 of 283 July 2014

 OpenWells Software Release Notes

Data Approval
The OpenWells and PROFILE applications now include a feature to mark and
identify Wells, Events and Reports that have gone through an approval process.

The approval process preserves and locks the information recorded about the
Well/Event/Report at the time of approval. The information preserved for a Well
includes the Wells data and its Events, Wellbores, Completions, Designs and
Reports data. The information preserved for an Event includes the Events data
and its Reports.

Note:

Reports can only be approved within the OpenWells application.

Further edits to any of the locked data requires unlocking of the Well, Event,
Wellbore, Completion, Design or Report by a user with the appropriate privileges.

5000.1.13 Page 113 of 283 July 2014

 OpenWells Software Release Notes

During the approval process the data is preserved via a database snapshot,
creating an approval point. Approval points can be compared to a previous
approval points of the same data element. For example, a Wells approval point
can be compared to the last approval point of that same Well. Well, Event and
Report approval points cannot be compared to one another.

Any PDF files that are attached to an approval point are electronically signed when
a Well, Event or Report is prepared for approval and when the Well, Event or
Report is approved. The location of the Approval Point PDF stamps in the
OpenWells and PROFILE applications can be configured using a system setting.
See the PDF Approval Stamp topic in the EDM Administration Utility online help.

Prior to preparing a Well, Event or Report for approval, the LGC EDM Historian
service must be configured.

The approval process consists of two separate workflows:

the preparation of the data for approval,

and the approval (or rejection) of the prepared data.
These processes are outlined in the OpenWells and PROFILE online help
systems.

New tokens have been added to the EDM Administration Utility to support the
new Approval feature.

Updating an Oracle Database to use the Historian Service

Prior to running a database upgrade on Oracle, the Database Administrator will

have to run the hist_tbs.sql script to create the EDMHIST1 tablespace. Without this
tablespace the database update will fail. This script is extracted during the 5000.1.5
install, with the Database Upgrade scripts to
C:TEMP\EDM_5000_1_2_SQL_Update folder.

Configure the Wrapper.conf File

The Wrapper.conf file defines the service parameters for the Historian Service.
This file requires access to the EDT Installation folder and is installed in the same
location as the EDT Installation folder, in the Historian/conf folder.

By default, the wrapper.conf looks for the EDT installation folder named
EDT_5000.1. If the EDT installation folder is not named EDT_5000.1, then the
wrapper.conf file must be edited to look for the correct folder containing the EDT
installation.

5000.1.13 Page 114 of 283 July 2014

 OpenWells Software Release Notes

To edit the wrapper.conf file, open the file in a text editor, such as Notepad, and
change the value of the following line.

wrapper.java.command=../../EDT_5000.1/Common Files/JDK/bin/javaw

For example, if the EDT installation folder in named Landmark Apps, then this line
should read as follows:

wrapper.java.command=../../Landmark Apps/Common Files/JDK/bin/javaw

Configure the LGC EDM Historian Service

The LGC EDM Historian service stores approval point snapshots and compares
differences between approval points. Prior to the preparing an approval point or
approving a Well, Event or Report, this service must be configured.

Only one instance of the LGC EDM Historian service needs to be configured for
each database being used.

1. To configure the Historian service on the machine hosting the service,

open the Windows Computer Management > Services interface and
stop the LGC EDM Historian service.

2. Check the security permissions for the Historian Service via the Log On tab
in the historian service properties dialog box. If the COE does not permit
services to run as a local system account, then appropriate account
credentials must be configured here for the service to run.

3. Launch the EDM Administration Utility and select the Historian Service ()
node.

Security Note:

The Administrator must be granted access to the Admin.Historian.edit token

to access the Historian Service in the EDM Administration Utility.

4. Enter the credentials for the database connections and ports.

5000.1.13 Page 115 of 283 July 2014

 OpenWells Software Release Notes

5. Click the Save button to save the credentials.

6. Open the Windows Computer Management > Services interface and

start the LGC EDM Historian service.

7. Once the service has started, wait approximately 10 seconds to verify that
the service continues to run. If any of the above connection details are
incorrect the service will stop shortly after starting.

Log Note:

The historian service logs events and errors to <Historian Installation Direc-
tory>\Historian\logs. In the event of a service failure it may be useful to in-
spect these logs to determine the cause (e.g., incorrect connection
information, username password not accepted etc.).

Release 5000.1.4

The OpenWells 5000.1.4 release is an incremental update to the Engineers

Desktop 5000.1.0 release. The primary focus of this release has been to enhance
the user experience and to expedite user workflows. This has been accomplished
through the addition of the following features:

Rig to Event/Report Association Improvements - A number of changes have been

made to the Rig Event/Report associations to improve the usability and flexibility of
associations. The changes are summarized in the following scenarios outlined
later in this document.
Only Currently Active Rigs are Available for Association
Associate Rig Operations to an Event with existing Daily Reports
The Wrong Rig is Associated to an Event
Rig Operations On Location Date Change
Associate a Rig Operation to an Event that already has an active Rig
Operation

5000.1.13 Page 116 of 283 July 2014

 OpenWells Software Release Notes

Deleting Rig Operations

Changing the Daily Operations Report Properties
TVD Calculations System Setting - A new System Setting
AllowProjectedTvdCalc, has been added to allow Administrators to select how
they want the application to respond when the current MD does not have an active
survey available to calculate the current TVD.
WITSML Halliburton SUMMIT Integration - OpenWells software now supports
the import of WITSML Stimulations data from the Halliburton SUMMIT
application into the OpenWells application.

Rig Changes
This section contains important information on changes to the Rig and Event
associations in the OpenWells 5000.1.4 application. These changes inform the
users of the effects of associating a Rig to an Event, when Daily Operations reports
exist for the Event.

Associating Rig Operations to Events - Rigs can be associated to Events

from a number of locations in the application. The scenarios outlined in this
document deal with Rig associations using the Associate Rig Operation to
Event Wizard and the Associate Rig to Daily Wizard. These Wizards are
accessed from a number of locations in the application:
Associate Rig Operation to Event Wizard
select the Event, follow the menu path: File > Associate > Rig
Operation...
right-click the Event and select Associate > Rig Operation
in the Event Properties dialog boxs Associated Rig Operations Tab, click the
(Add Rig Operation) button.

Associate Rig to Daily Wizard - These options are only available if a Rig has
not already been associated to the Daily Operations report.
in the Create Daily Report Wizard, select the Associate Rig... button.
in the Daily Operations report's Rig Equipment sections (e.g., Pump
Operations section), click the Associate Rig button.
Scenario A: Only Currently Active Rigs are Available for Association

When creating an association between an Event or Daily Operations report and

a Rig Operation, the list of Rigs with available Rig Operations that CAN be
associated are now filtered. The OpenWells application will only show Rigs
which are currently active.

A Rig is defined as currently active if:

5000.1.13 Page 117 of 283 July 2014

 OpenWells Software Release Notes

its Start Date is null OR less than OR equal to the current date

AND

its End Date is null OR greater than OR equal to the current date

Figure 44: Of the 5 GLOBAL MARINE DRILLING Rigs, only 3 are available in the
Associate Rig Operation to Event Wizard. This is a result of the new Rig filtering fea-
ture.

Scenario B: Associate Rig Operations to an Event with existing Daily Reports

At the time a Rig Operation is associated to an Event, any existing Daily

Operations reports within the Event that fall within the Rig On Location date
range WILL be updated with the new associated Rig Equipment data. The
following example illustrates this new feature.

An Event that has no Rig Operations associated to it contains two Daily

Operations reports. As a result of the lack of an association these Daily
Operations reports do not have Rig Equipment listed.

5000.1.13 Page 118 of 283 July 2014

 OpenWells Software Release Notes

No Rig Association

Figure 45: Event showing no associations and Daily Operations reports showing no
Rig Equipment.

When the Event is associated to the ALPINE/N15 Rig a dialog box appears
informing the user that the two existing Daily Operations reports will be updated
with the new Rigs data.

Figure 46: Associate Rig Operation to Event Wizard with message showing the Daily
Operations reports that will be updated.

After the Association has been made, the reports now display the Rig Name in
the title bar and any equipment installed on the Rig are listed within the report.

5000.1.13 Page 119 of 283 July 2014

 OpenWells Software Release Notes

Associated Rig

Figure 47: Rig association shown in the Event Properties and the Daily Operations
Report showing the associated Rig and Rig Equipment data.

Scenario C: The Wrong Rig is Associated to an Event

After a Rig Operation is associated to an Event, the user realizes that they had
selected the wrong Rig. The OpenWells application allows the user to remove
the associated Rig and select the correct Rig for association.

In the Event Properties > Associated Rig Operations tab, the user selects the
row containing the Rig Operation to be removed and clicks the (Remove
Associated Rig Operation) button. All Daily Operations reports, within the
Event, that are currently associated with the Rig and within the Rigs date
range, will have their Rig Equipment operations data deleted and Rig
association remove. A message appears showing the reports affected by the
removal.

If this was the only association for the Rig Operation, then the Rig Operation is
also deleted.

5000.1.13 Page 120 of 283 July 2014

 OpenWells Software Release Notes

Figure 48: Message listing the Daily Operations reports affected by the Rig Associa-
tion removal.

The use can now associate the correct Rig/Rig Operation with the Event.

As in Scenario B, when the Event is associated to the correct Rig a dialog box
appears informing the user that the existing Daily Operations reports will be
updated with the new Rigs data.

Figure 49: Associate Rig Operation to Event Wizard with message showing the Daily
Operations reports that will be updated.

Scenario D: Rig Operations On Location Date Change

When a user changes the Rig Operations Rig On Location date, existing Daily
Operations reports may be affected in one of the following ways.

Reports fall outside the Rig On Location date range.

The new Rig On Location date puts currently associated Daily Operations
reports outside of the Rig Operations On Location date range. The
OpenWells application responds to this action by displaying a message
notifying the user of any Daily Operations reports that are now outside of the
On Location date range. The reports are NOT updated by the change in date.

5000.1.13 Page 121 of 283 July 2014

 OpenWells Software Release Notes

Figure 50: Rig On Location date is changed from 02/15/2009 to 03/15/2009, which
pushes two Daily Operations reports outside the Rig On Location date range.

Reports that were outside the Rig On Location date range are now within
range

The new Rig On Location date puts currently associated Daily Operations
reports, which were outside of the Rig Operations On Location date range,
within the date range. The OpenWells application responds to this action by
displaying a message notifying the user of any Daily Operations reports that are
now within the On Location date range. The reports are NOT updated by the
change in date if they were previously within range.

5000.1.13 Page 122 of 283 July 2014

 OpenWells Software Release Notes

Figure 51: Rig On Location date is changed from 03/15/2009 to 02/15/2009, which
pushes two Daily Operations reports within the Rig On Location date range.

Scenario E: Associate a Rig Operation to an Event that already has an active

Rig Operation

A new Rig Operation is associated to an Event that has an existing active Rig
Operation association. The OpenWells application prompts the user to update
any affected Daily Operations reports with the new Rig Operation data or leave
the report with its existing Rig Operation data.

Once the new association is complete, the application displays a dialog box
where the user can choose whether or not to update each affected Daily
Operations report.

If the user chooses to update a report, then the Update button next to
that report should be clicked.
If the user does not want to update a report, then the Update button
should NOT be clicked.

When a report is updated its text turns blue in the dialog box.

Figure 52: dialog box allowing the user to choose which reports are to be associated
to the new Rig Operation. The blue text indicates the report has been updated.

5000.1.13 Page 123 of 283 July 2014

 OpenWells Software Release Notes

Deleting Rig Operations

If a Rig Operation is associated to an Event/Daily it can no longer be deleted in
the Contractors tree. When a user attempts to delete the Rig Operation in the
Contractors tab the following message appears.

Figure 53: Message indicating the Rig Operation cannot be deleted due to its associ-
ation with one or more Events.

To delete a Rig Operation that is associated to an Event, the user must remove
it in the Event Properties dialog box.

In the Event Properties > Associated Rig Operations tab, the user selects the
row containing the Rig Operation to be removed and clicks the (Remove
Associated Rig Operation) button. All Daily Operations reports, within the
Event that are currently associated with the Rig will have their Rig Equipment
deleted and the association is removed. If this was the only association for the
Rig Operation, then the Rig Operations is also deleted.

Figure 54: Message listing the Daily Operations reports affected by the Rig Associa-
tion

Changing the Daily Operations Report Properties

The OpenWells application now allows users to change the Rig/Rig Operation
associations from the Report Properties dialog box of a Daily Operations report.

The Daily Operations Report Properties dialog box is accessed from the
following locations:

From within the report window follow the menu path: File > Properties...

5000.1.13 Page 124 of 283 July 2014

 OpenWells Software Release Notes

Right-click the report in the Report List and select Properties... from the
menu that appears

Changing the Rig and Rig Operation from the Report Properties dialog box

The Rig Contractor, Name, No fields picklist displays a list of Rigs available
for association to the Daily Operations report. Only Rigs which are On
Location during the Reports date are shown in this list. The selected Rig is
currently associated to the report.

Figure 55: Report Properties dialog box showing the Rig picklist.

The currently associated Rig Operation can be changed using this picklist.

When the user selects a different rig from this picklist and the current
associated Rig has Rig Equipment Operations, the application informs the user
of the equipment operations that will be deleted. The users can then choose to
delete the operations or cancel the change.

5000.1.13 Page 125 of 283 July 2014

 OpenWells Software Release Notes

Figure 56: Message indicating how many Rig Operations will be affected by the
change in association.

Changing the Report Date from the Report Properties dialog box

When the user changes the Report Date in the Properties dialog box, and the
new date falls outside of the Rig On Location date range, the application
informs the user of the equipment operations that will be deleted. The users can
then choose to delete the operations or cancel the change.

Figure 57: Message indicating how many Rig Operations will be affected by the
change in Report Date.

If the user chooses to proceed with the date change, the Rig Contractor,
Name, No picklist will be set to --None-- and any related Rig Equipment
Operations will be deleted from the Report.

OpenWells TVD Calculations

The OpenWells application now allows Administrators to selected how they want
the application to respond when the current MD does not have an active survey
available to calculate the current TVD.

A new System Setting AllowProjectedTvdCalc has been added to the EDM

Administration Utility to define how OpenWells handles the calculation of the
current TVD when a survey is not available for the current MD.

The AllowProjectedTvdCalc System Setting defines the TVD calculation as

follows:

When set to FALSE, the application will not calculate the TVD for a MD that has
no active survey and will display a null value.

5000.1.13 Page 126 of 283 July 2014

 OpenWells Software Release Notes

When set to TRUE, the application uses the closest survey to calculate the TVD
of a MD that has no active survey.
The following table illustrates TVD calculations when using the new System
Setting.

Scenario TVD Calculation Behavior

MD and today's survey station have Calculate TVD using the survey being recorded by the drill-
been recorded by the drilling supervisor. ing supervisor. (Independent of the system setting for sur-
vey projection)
MD has been recorded by the drilling Calculate TVD using the survey being recorded by the drill-
supervisor on a day with no survey sta- ing supervisor, even though a station was not recorded
tions being recorded. today. (Independent of the system setting for survey projec-
Days with ongoing operations (i.e. Cas- TVD is that of the last day of drilling prior to the operations
ing/Cementing) but no progress in MD with no progress. This TVD should not change until prog-
and no further survey stations recorded ress is made and a new survey entered (i.e. even if a sur-
past the last station during drilling. vey is entered for a deeper interval it should not affect the
TVD during ongoing operations with no progress). (Inde-
pendent of system setting for survey projection)

Vertical well ("post hole") with a survey Calculate TVD using the survey from the previous interval
in a depth interval drilled prior to the cur- when the system setting for survey projection is enabled.
rent depth interval.
TVD is blank when the system setting for survey projection
is disabled.
A depth interval that does not deviate Calculate TVD using the survey from the previous interval
from the last inclination and azimuth of when the system setting for survey projection is enabled.
the previous interval (non-vertical, non-
deviating hole section). TVD is blank when the system setting for survey projection
is disabled.
A depth interval that deviates from the Calculate TVD using the survey from the previous interval
last inclination and azimuth in the previ- when the system setting for survey projection is enabled.
ous interval.
TVD is blank when the system setting for survey projection
is disabled.
Vertical well ("post hole") with no sur- Calculate TVD equal to MD when the system setting for sur-
veys for any depth intervals. vey projection is enabled.

TVD is blank when the system setting for survey projection

is disabled.

5000.1.13 Page 127 of 283 July 2014

 OpenWells Software Release Notes

WITSML Halliburton SUMMIT Integration

OpenWells software allows for the import of Stimulations data from the
Halliburton SUMMIT application using WITSML 1.3.1.1 standards.

WITSML 1.3.1.1 Standards:

The workflow outlined here is still in the process of being approved by the
WITSML community.

Stimulation data imported includes:

Intervals
Flow Paths
Stages
Fluids
Proppant
Additives
PDAT Session
Step Tests
Reservoir Intervals
Stimulation FET Tests
Pump Flowback Tests
Some of the Halliburton SUMMIT data imported is not exposed in the
OpenWells application. This data can still be queried in the Data Analyzer
application from the following OpenWells tables:

DM_STIM_FET_TEST
DM_STIM_FLOWPATH
DM_STIM_FLOWPATH_STAGE
DM_STIM_PUMP_FB_TEST
DM_STIM_PUMPING_DIAG
DM_STIM_RES_INTERVAL
DM_STIM_STAGE_SUPPLEMENT
DM_STIM_STEP_TEST

Importing Halliburton SUMMIT WITSML XML into OpenWells software

The following flowchart outlines the workflow for importing Stimulations data
from into the OpenWells application using WITSML XML files generated by
the Halliburton SUMMIT application.

5000.1.13 Page 128 of 283 July 2014

 OpenWells Software Release Notes

A step by step guide to importing Halliburton SUMMIT WITSML XML data

into OpenWells can be found in the Importing Halliburton SUMMIT
Stimulations Data online help topic.

5000.1.13 Page 129 of 283 July 2014

 OpenWells Software Release Notes

Obtain WITSML XML

files from Halliburton

Log into OpenWells.

Create a Stimulations Do I have a

No Stimulations Report?
Report.

Select the Create New Report

button in the Wizard toolbar.

Select Stimulation in the

Report Type list.

Yes
Select the Company, Project,
Site, Well, Wellbore and Event.

Click the Next button.

Enter the correct Report

Date and a brief Open the Stimulation Report.
description.

Click the Finish button.

In the Report window, follow

The Stimulation Report
the menu path, File >
opens.
WITSML > Import.

5000.1.13 Page 130 of 283 July 2014

 OpenWells Software Release Notes

Navigate to and select the

WITSML XML export file.

Click the Open button.

Click the Import button.

Select the XML file containing

the datum information and
click the Select button.

Do you have a XML file

Yes containing the Wells No
datum information?

Click the Select button. Click the Cancel button.

If the Well file selected does not OpenWells software uses the
contain a valid datum (i.e., missing EDM Default Datum defined in
or zero), then the EDM Default the Well Properties, Depth
Datum is used. Reference Tab.

If the EDM Default Datum does If the EDM Default Datum does
not give the correct offset for the not give the correct offset for the
data being imported, all depths data being imported, all depths
being imported will be incorrect. being imported will be incorrect.

5000.1.13 Page 131 of 283 July 2014

 OpenWells Software Release Notes

Does data already exist in

the Stimulations report? No

The Stimulations data is

imported from the XML file into
Yes the Stimulations Report.

Do you want to Replace the

existing data or Append to the
existing data?
Replace Append

The Stimulations data is imported

from the XML file into the Stimulations
Report an overwrites all existing data.

The Stimulations data is imported from the XML

file into the Stimulations Report and appended
to the existing data. With the exception of data
appearing in the General section of the report.
This data is updated or overwritten.

5000.1.13 Page 132 of 283 July 2014

 OpenWells Software Release Notes

WITSML to OpenWells Mappings

The following table outlines the mappings used to move data from the WITSML
1.3.1 XML file generated in the Halliburton SUMMIT application to the EDM
Database.

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
obj_stimJob.xsd Set DM_STIM_-
JOB.PHASE to ACTUAL

obj_stimJob.xsd nameWell

obj_stimJob.xsd name

obj_stimJob.xsd version

obj_stimJob.xsd uid

obj_stimJob.xsd uidWell

obj_stimJob.xsd uidWellbore

grp_stimJob.xsd

grp_stimJob.xsd jobType DM_REPORT_JOURNAL description update existing field

and truncate to 50
from 64 if needed

grp_stimJob.xsd serviceCompany DM_STIM_JOB contractor update existing field

and truncate to 60
from 64 if needed

grp_stimJob.xsd supervisor DM_STIM_JOB supervisor update existing field

grp_stimJob.xsd apiNumber

grp_stimJob.xsd nameStimJob

grp_stimJob.xsd customerName

grp_stimJob.xsd timeOnLocation DM_STIM_JOB contractor_arrival_date update existing field

grp_stimJob.xsd startTime DM_STIM_JOB job_date update existing field

grp_stimJob.xsd totalPumpTime

grp_stimJob.xsd MaxJobPressure DM_STIM_TREATMENT max_job_pressure used in the calculation

of DM_STIM_JOB.max-
_treating_pressure

grp_stimJob.xsd MaxFluidRate DM_STIM_JOB max_injection_rate not imported (calcu-

lated from
DM_STIM_TREAT-
MENT.inject_rate_max)

grp_stimJob.xsd AvgJobPressure DM_STIM_JOB avg_treating_pressure not imported (calcu-

lated)

grp_stimJob.xsd volJob DM_STIM_JOB total_fluid_pumped not imported (calcu-

lated)

grp_stimJob.xsd totalProppantWt DM_STIM_JOB total_proppant_used update existing field

grp_stimJob.xsd proppantName

grp_stimJob.xsd totalPerfBalls

5000.1.13 Page 133 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
grp_stimJob.xsd totalN2 DM_STIM_JOB n2_total not imported (calcu-
lated)

grp_stimJob.xsd totalCO2 DM_STIM_JOB co2_total not imported (calcu-

lated)

grp_stimJob.xsd hhpOrdered

grp_stimJob.xsd hhpUsed DM_STIM_JOB total_hydraulic_hp not imported (calcu-

lated)

grp_stimJob.xsd fluidEfficiency DM_STIM_TREATMENT fluid_efficiency Carry over for each

interval

grp_stimJob.xsd flowBackPressure DM_STIM_FLOWBACK pressure_30_min create a DM_STIM_-

FLOWBACK record for
this job if there is data.
Populate sequence_no.

grp_stimJob.xsd flowBackRate DM_STIM_FLOWBACK flowback_rate create a DM_STIM_-

FLOWBACK record for
this job if there is data.

grp_stimJob.xsd flowBackVolume DM_STIM_FLOWBACK flowback_volume create a DM_STIM_-

FLOWBACK record for
this job if there is data.

grp_stimJob.xsd numOfTreatmentInter-
vals

grp_stimJob.xsd bhStaticTemperature

grp_stimJob.xsd treatingBHTemperature

cs_stimJobInterval.xsd

cs_stimJobInterval.xsd avgFractureWidth DM_STIM_TREATMENT prop_width_average update existing field

cs_stimJobInterval.xsd avgConductivity DM_STIM_TREATMENT conductivity_average do not import since

WITSML units cannot
be converted to EDM
units

cs_stimJobInterval.xsd netPressure DM_STIM_TREATMENT net_pressure update existing field

cs_stimJobInterval.xsd closurePressure DM_STIM_TREATMENT closure_pressure update existing field

cs_stimJobInterval.xsd closureDuration

cs_stimJobInterval.xsd uidTreatmentInterval

cs_stimJobInterval.xsd treatmentInterval- DM_STIM_TREATMENT job_type Format with "Interval:

Name ", truncate to 50

cs_stimJobInterval.xsd treatmentNumber DM_STIM_TREATMENT sequence_no Start at max existing

plus 1 and increment,
to avoid duplicates. If
none present, start at
0.

cs_stimJobInterval.xsd treatmentInter- DM_STIM_TREATMENT time_start

valStartTime

cs_stimJobInterval.xsd formationName DM_STIM_TREATMENT zone truncate to 50 if neces-

sary

cs_stimJobInterval.xsd mdFormationTop DM_STIM_TREATMENT interval_top rdl depth

cs_stimJobInterval.xsd mdFormationBottom DM_STIM_TREATMENT interval_base rdl depth

5000.1.13 Page 134 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobInterval.xsd tvdFormationTop

cs_stimJobInterval.xsd tvdFormationBottom

cs_stimJobInterval.xsd mdPerforationsTop

cs_stimJobInterval.xsd mdPerforationsBottom

cs_stimJobInterval.xsd tvdPerforationsTop

cs_stimJobInterval.xsd tvdPerforationsBottom

cs_stimJobInterval.xsd numberOfPerfs

cs_stimJobInterval.xsd perfSize

cs_stimJobInterval.xsd perfFrictionFactor

cs_stimJobInterval.xsd mdJetTargetTop

cs_stimJobInterval.xsd mdJetTargetBottom

cs_stimJobInterval.xsd tvdJetTargetTop

cs_stimJobInterval.xsd tvdJetTargetBottom

cs_stimJobInterval.xsd numberOfJetTargets

cs_stimJobInterval.xsd jetTargetSize

cs_stimJobInterval.xsd totalFrictionPressure-
Loss

cs_stimJobInterval.xsd totalPumpTime

cs_stimJobInterval.xsd maxPressureTubing

cs_stimJobInterval.xsd maxPressureCasing

cs_stimJobInterval.xsd maxPressureAnnulus

cs_stimJobInterval.xsd maxFluidRateTubing

cs_stimJobInterval.xsd maxFluidRateCasing

cs_stimJobInterval.xsd maxFluidRateAnnulus

cs_stimJobInterval.xsd breakPressure DM_STIM_TREATMENT break_pressure

cs_stimJobInterval.xsd averagePressure DM_STIM_JOB avg_treating_pressure not imported (calcu-

lated)

cs_stimJobInterval.xsd avgCleanReturnRate may accumulate from

lower levels

cs_stimJobInterval.xsd avgSlurryReturnRate may accumulate from

lower levels

cs_stimJobInterval.xsd totalVolume may accumulate from

lower levels

cs_stimJobInterval.xsd maxProppantConcSur- may accumulate from

face lower levels

cs_stimJobInterval.xsd maxProppantConcBot- may accumulate from

tomHole lower levels

5000.1.13 Page 135 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobInterval.xsd avgProppantConcSur- DM_STIM_TREATMENT prop_conc_average
face

cs_stimJobInterval.xsd avgProppantConcBot-
tomHole

cs_stimJobInterval.xsd proppantConcAtPerfs

cs_stimJobInterval.xsd totalProppant DM_STIM_JOB total_proppant_used not imported (calcu-

lated)

cs_stimJobInterval.xsd totalProppantUsage

cs_stimJobInterval.xsd proppantName DM_STIM_FLU- proppant_name not imported, complex

ID_SCHEDULE type, 1:n

cs_stimJobInterval.xsd totalMassUsed

cs_stimJobInterval.xsd percentProppant-
Pumped

cs_stimJobInterval.xsd proppantInWellbore

cs_stimJobInterval.xsd proppantName

cs_stimJobInterval.xsd proppantInFormation DM_STIM_JOB total_proppant_in_for- not imported (calcu-

mation lated)

cs_stimJobInterval.xsd totalPerfBalls

cs_stimJobInterval.xsd totalN2 DM_STIM_TREATMENT gas_total_n2

cs_stimJobInterval.xsd totalCO2 DM_STIM_TREATMENT gas_total_co2

cs_stimJobInterval.xsd fluidName

cs_stimJobInterval.xsd fractureGradient DM_STIM_TREATMENT frac_gradient units must go to mea-

sure 55

cs_stimJobInterval.xsd finalFractGradient

cs_stimJobInterval.xsd initialShutInPressure DM_STIM_TREATMENT initial_shut_in_pres-

sure

cs_stimJobInterval.xsd shutInPressure not imported (complex

type)

cs_stimJobInterval.xsd pressure DM_STIM_TREATMENT int_shut_in_pres- Import first 3 then

sure_1, int_shut_in_- ignore
pressure2 (note
spelling), int_shut_in_-
pressure_3

cs_stimJobInterval.xsd timeAfterShutIn DM_STIM_TREATMENT int_shut_in_pres- Import first 3 then

sure1_time, then 2 ignore
then 3

cs_stimJobInterval.xsd screenOutPressure

cs_stimJobInterval.xsd hhpOrderedCO2

cs_stimJobInterval.xsd hhpOrderedFluid

cs_stimJobInterval.xsd hhpUsedCO2

cs_stimJobInterval.xsd hhpUsedFluid

cs_stimJobInterval.xsd perfBallSize DM_STIM_FLU- proppant_size not imported (note -

ID_SCHEDULE formerly created stage
& fluid records)

5000.1.13 Page 136 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobInterval.xsd screenedOut DM_STIM_TREATMENT is_screened_out WITSML values of True,
False, 0 or 1 will be
converted to Y or N in
EDM consecutively. If
this value is missing it
will be NULL in EDM.

cs_stimFlowPath.xsd new DM_STIM_FLOW-

BACK record for every
flow path (new child of
DM_STIM_TREAT-
MENT)

cs_stimFlowPath.xsd pipeFrictionFactor DM_STIM_FLOWPATH pipe_friction_factor

cs_stimFlowPath.xsd stimFlowPathType DM_STIM_FLOWPATH stim_flowpath_type

cs_stimFlowPath.xsd stimFlowPathName DM_STIM_FLOWPATH stim_flowpath_name

cs_stimFlowPath.xsd flowpathDescription DM_STIM_FLOWPATH flowpath_description

cs_stimFlowPath.xsd maxTreatmentPressure DM_STIM_FLOWPATH max_treatment_pres-

sure

cs_stimFlowPath.xsd maxSlurryRate DM_STIM_FLOWPATH max_slurry_rate

cs_stimFlowPath.xsd maxWHRate DM_STIM_FLOWPATH max_wh_rate

cs_stimFlowPath.xsd maxN2StdRate DM_STIM_FLOWPATH max_n2_std_rate

cs_stimFlowPath.xsd maxCO2LiquidRate DM_STIM_FLOWPATH max_co2_liquid_rate

cs_stimFlowPath.xsd maxGelRate DM_STIM_FLOWPATH max_gel_rate

cs_stimFlowPath.xsd maxOilRate DM_STIM_FLOWPATH max_oil_rate

cs_stimFlowPath.xsd maxAcidRate DM_STIM_FLOWPATH max_acid_rate

cs_stimFlowPath.xsd maxPropConc DM_STIM_FLOWPATH max_prop_conc

cs_stimFlowPath.xsd maxSluryPropConc DM_STIM_FLOWPATH max_slurry_prop_conc

cs_stimFlowPath.xsd avgTreatPres DM_STIM_FLOWPATH avg_treatment_pres-

sure

cs_stimFlowPath.xsd avgCleanRate DM_STIM_FLOWPATH avg_clean_rate

cs_stimFlowPath.xsd avgSlurryRate DM_STIM_FLOWPATH avg_slurry_rate

cs_stimFlowPath.xsd avgWHRate DM_STIM_FLOWPATH avg_wh_rate

cs_stimFlowPath.xsd avgN2StdRate DM_STIM_FLOWPATH avg_n2_std_rate

cs_stimFlowPath.xsd avgCO2LiquidRate DM_STIM_FLOWPATH avg_co2_std_rate

cs_stimFlowPath.xsd avgGelRate DM_STIM_FLOWPATH avg_gel_rate

cs_stimFlowPath.xsd avgOilRate DM_STIM_FLOWPATH avg_oil_rate

cs_stimFlowPath.xsd avgAcidRate DM_STIM_FLOWPATH avg_acid_rate

cs_stimFlowPath.xsd avgPropConc DM_STIM_FLOWPATH avg_prop_conc

cs_stimFlowPath.xsd avgSlurryPropConc DM_STIM_FLOWPATH avg_slurry_prop_conc

cs_stimFlowPath.xsd avgTemperature DM_STIM_FLOWPATH avg_temperature

5000.1.13 Page 137 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimFlowPath.xsd avgIntervalPhaseFrac- DM_STIM_FLOWPATH avg_interval_phase_-
tion fraction

cs_stimFlowPath.xsd avgCleanQuality DM_STIM_FLOWPATH avg_clean_quality

cs_stimFlowPath.xsd avgN2CleanQuality DM_STIM_FLOWPATH avg_n2_clean_quality

cs_stimFlowPath.xsd avgCO2CleanQuality DM_STIM_FLOWPATH avg_co2_clean_quality

cs_stimFlowPath.xsd avgHydraulicPower DM_STIM_FLOWPATH avg_hydraulic_power

cs_stimFlowPath.xsd cleanVol DM_STIM_FLOWPATH clean_vol

cs_stimFlowPath.xsd slurryVol DM_STIM_FLOWPATH slurry_vol

cs_stimFlowPath.xsd WHVol DM_STIM_FLOWPATH wh_vol

cs_stimFlowPath.xsd N2StdVol DM_STIM_FLOWPATH n2_std_vol

cs_stimFlowPath.xsd CO2Mass DM_STIM_FLOWPATH co2_mass

cs_stimFlowPath.xsd gelVol DM_STIM_FLOWPATH gel_vol

cs_stimFlowPath.xsd oilVol DM_STIM_FLOWPATH oil_vol

cs_stimFlowPath.xsd acidVol DM_STIM_FLOWPATH acid_vol

cs_stimFlowPath.xsd cleanBypassVol DM_STIM_FLOWPATH clean_bypass_vol

cs_stimFlowPath.xsd propMass DM_STIM_FLOWPATH prop_mass

cs_stimFlowPath.xsd maxPmaxPacPres DM_STIM_FLOWPATH max_pmax_pac_pres-

sure

cs_stimFlowPath.xsd maxPmaxWLPres DM_STIM_FLOWPATH max_pmax_wl_pres-

sure

cs_stimFlowPath.xsd avgPmaxPacPres DM_STIM_FLOWPATH avg_pmax_pac_pres-

sure

cs_stimFlowPath.xsd avgPmaxWLPres DM_STIM_FLOWPATH avg_pmax_wl_pres-

sure

cs_stimFlowPath.xsd SIPres5Min DM_STIM_FLOWPATH si_press_5_min

cs_stimFlowPath.xsd SIPres10Min DM_STIM_FLOWPATH si_press_10_min

cs_stimFlowPath.xsd SIPres15Min DM_STIM_FLOWPATH si_press_15_min

cs_stimFlowPath.xsd breakDownPressure DM_STIM_FLOWPATH break_down_pressure

cs_stimFlowPath.xsd percentPad DM_STIM_FLOWPATH percent_pad

cs_stimFlowPath.xsd fractureGradient DM_STIM_FLOWPATH fracture_gradient

cs_stimFlowPath.xsd tubingSize DM_STIM_FLOWPATH tubing_size

cs_stimFlowPath.xsd tubingWeight DM_STIM_FLOWPATH tubing_weight

cs_stimFlowPath.xsd casingSize DM_STIM_FLOWPATH casing_size

cs_stimFlowPath.xsd casingWeight DM_STIM_FLOWPATH casing_weight

cs_stimFlowPath.xsd jobStage

5000.1.13 Page 138 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobStage.xsd New DM_STIM_STAGE
record, child of
DM_STIM_TREAT-
MENT, FK link to
DM_STIM_FLOWPATH
through new
DM_STIM_FLOW-
PATH_STAGE record.

cs_stimJobStage.xsd stimStageType DM_STIM_STAGE stage_type Truncate to 20 if neces-

sary; longest type in
enumeration is length
21

cs_stimJobStage.xsd stimStageName DM_STIM_STAGE stage_comments

cs_stimJobStage.xsd stageDescription DM_STIM_STAGE stage_comments Append to stimSta-

geName and place in
square brackets [ ]

cs_stimJobStage.xsd numStage DM_STIM_STAGE sequence_no do not import but gen-

erate a unique ascend-
ing sequence number
instead

cs_stimJobStage.xsd startTime DM_STIM_FLU- time_start Generate sequence_no

ID_SCHEDULE in new DM_STIM_FLU-
ID_SCHEDULE record

cs_stimJobStage.xsd endTime DM_STIM_FLU- time_end

ID_SCHEDULE

cs_stimJobStage.xsd pumpTime DM_STIM_STAGE_- pump_time

SUPPLEMENT

cs_stimJobStage.xsd startRateSurfaceLiquid DM_STIM_STAGE_- start_rate_surface_liq-

SUPPLEMENT uid

cs_stimJobStage.xsd endRateSurfaceLiquid DM_STIM_STAGE_- end_rate_surface_liq-

SUPPLEMENT uid

cs_stimJobStage.xsd avgRateSurfaceLiquid DM_STIM_FLU- average_fluid_rate

ID_SCHEDULE

cs_stimJobStage.xsd startRateSurfaceCO2 DM_STIM_STAGE_- start_rate_surface_co2

SUPPLEMENT

cs_stimJobStage.xsd endRateSurfaceCO2 DM_STIM_STAGE_- end_rate_surface_co2

SUPPLEMENT

cs_stimJobStage.xsd avgRateSurfaceCO2 DM_STIM_FLU- avg_gas_rate_co2

ID_SCHEDULE

cs_stimJobStage.xsd startRateSurfaceN2 DM_STIM_STAGE_- start_rate_surface_n2

SUPPLEMENT

cs_stimJobStage.xsd endRateSurfaceN2 DM_STIM_STAGE_- end_rate_surface_n2

SUPPLEMENT

cs_stimJobStage.xsd avgRateSurfaceN2 DM_STIM_FLU- avg_gas_rate_n2

ID_SCHEDULE

cs_stimJobStage.xsd startPressureSurface DM_STIM_FLU- see import rule casing_pressure_initial

ID_SCHEDULE for a Casing flowpath,
tubing_pressure_initial
for a Tubing flowpath.
Also goes to
DM_STIM_STAGE_-
SUPPLEMENT.start_-
pressure_surface.

5000.1.13 Page 139 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobStage.xsd endPressureSurface DM_STIM_FLU- see import rule casing_pressure_final
ID_SCHEDULE for a Casing flowpath,
tubing_pressure_final
for a Tubing flowpath.
Also goes to
DM_STIM_STAGE_-
SUPPLEMENT.end_-
pressure_surface.

cs_stimJobStage.xsd averagePressureSur- DM_STIM_FLU- avg_inj_pressure

face ID_SCHEDULE

cs_stimJobStage.xsd startPumpRateBottom- DM_STIM_STAGE_- start_pump_rate_bot-

Hole SUPPLEMENT tom_hole

cs_stimJobStage.xsd endPumpRateBottom- DM_STIM_STAGE_- end_pump_rate_bot-

Hole SUPPLEMENT tom_hole

cs_stimJobStage.xsd avgPumpRateBottom- DM_STIM_STAGE_- avg_pump_rate_bot-

Hole SUPPLEMENT tom_hole

cs_stimJobStage.xsd startPressureBottom- DM_STIM_STAGE_- start_pressure_bot-

Hole SUPPLEMENT tom_hole

cs_stimJobStage.xsd endPressureBottom- DM_STIM_STAGE_- end_pressure_bot-

Hole SUPPLEMENT tom_hole

cs_stimJobStage.xsd averagePressureBot- DM_STIM_STAGE_- average_pressure_bot-

tomHole SUPPLEMENT tom_hole

cs_stimJobStage.xsd startProppantConcSur- DM_STIM_FLU- proppant_concentra-

face ID_SCHEDULE tion_start

cs_stimJobStage.xsd endProppantConcSur- DM_STIM_FLU- proppant_concentra-

face ID_SCHEDULE tion_end

cs_stimJobStage.xsd avgProppantConcSur- DM_STIM_FLU- proppant_concentra-

face ID_SCHEDULE tion

cs_stimJobStage.xsd startProppantConcBH DM_STIM_STAGE_- start_proppant_con-

SUPPLEMENT c_bh

cs_stimJobStage.xsd endProppantConcBH DM_STIM_STAGE_- end_proppant_conc_bh

SUPPLEMENT

cs_stimJobStage.xsd avgProppantConcBH DM_STIM_STAGE_- avg_proppant_conc_bh

SUPPLEMENT

cs_stimJobStage.xsd startFoamRateN2 DM_STIM_FLU- start_foam_rate_n2

ID_SCHEDULE

cs_stimJobStage.xsd endFoamRateN2 DM_STIM_FLU- end_foam_rate_n2

ID_SCHEDULE

cs_stimJobStage.xsd startFoamRateCO2 DM_STIM_FLU- start_foam_rate_co2

ID_SCHEDULE

cs_stimJobStage.xsd endFoamRateCO2 DM_STIM_FLU- end_foam_rate_co2

ID_SCHEDULE

cs_stimJobStage.xsd fluidVolClean DM_STIM_FLU- fluid_volume_clean import to EDM Calcu-

ID_SCHEDULE lated Editable field

cs_stimJobStage.xsd fluidVolDirty DM_STIM_STAGE_- fluid_vol_dirty

SUPPLEMENT

cs_stimJobStage.xsd fluidVolSlury DM_STIM_FLU- volume_pumped import to EDM Calcu-

ID_SCHEDULE lated Editable field

cs_stimJobStage.xsd dirtyRateBegin DM_STIM_FLU- pumping_rate_initial

ID_SCHEDULE

5000.1.13 Page 140 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobStage.xsd dirtyRateEnd DM_STIM_FLU- pumping_rate_final
ID_SCHEDULE

cs_stimJobStage.xsd proppantMassWellHead DM_STIM_STAGE_- proppant_mass_well_-

SUPPLEMENT head

cs_stimJobStage.xsd proppantMass DM_STIM_STAGE proppant_used

cs_stimJobStage.xsd maxPressure DM_STIM_STAGE_- max_pressure

SUPPLEMENT

cs_stimJobStage.xsd maxSlurryRate DM_STIM_STAGE_- max_slurry_rate

SUPPLEMENT

cs_stimJobStage.xsd maxWHRate DM_STIM_STAGE_- max_wh_rate

SUPPLEMENT

cs_stimJobStage.xsd maxN2Rate DM_STIM_STAGE_- max_n2_rate

SUPPLEMENT

cs_stimJobStage.xsd maxCO2LiquidRate DM_STIM_STAGE_- max_co2_liquid_rate

SUPPLEMENT

cs_stimJobStage.xsd maxPropConc DM_STIM_STAGE_- max_prop_conc

SUPPLEMENT

cs_stimJobStage.xsd maxSlurryPropConc DM_STIM_STAGE_- max_slurry_prop_conc

SUPPLEMENT

cs_stimJobStage.xsd avgPropConc DM_STIM_STAGE_- avg_prop_conc

SUPPLEMENT

cs_stimJobStage.xsd avgSlurryPropConc DM_STIM_STAGE_- avg_slurry_prop_conc

SUPPLEMENT

cs_stimJobStage.xsd avgTemperature DM_STIM_STAGE_- avg_temperature

SUPPLEMENT

cs_stimJobStage.xsd avgInternalPhaseFrac- DM_STIM_STAGE_- avg_internal_phase_-

tion SUPPLEMENT fraction

cs_stimJobStage.xsd avgCleanQuality DM_STIM_STAGE_- avg_clean_quality

SUPPLEMENT

cs_stimJobStage.xsd avgN2CleanQuality DM_STIM_STAGE_- avg_n2_clean_quality

SUPPLEMENT

cs_stimJobStage.xsd avgCO2CleanQuality DM_STIM_STAGE_- avg_co2_clean_quality

SUPPLEMENT

cs_stimJobStage.xsd avgHydraulicPower DM_STIM_STAGE_- avg_hydraulic_power

SUPPLEMENT

cs_stimJobStage.xsd avgCleanRate DM_STIM_STAGE_- avg_clean_rate

SUPPLEMENT

cs_stimJobStage.xsd avgDirtyRate DM_STIM_STAGE_- avg_dirty_rate

SUPPLEMENT

cs_stimJobStage.xsd avgWHRate DM_STIM_STAGE_- avg_wh_rate

SUPPLEMENT

cs_stimJobStage.xsd avgN2Rate DM_STIM_STAGE_- avg_n2_rate

SUPPLEMENT

cs_stimJobStage.xsd avgCO2Rate DM_STIM_STAGE_- avg_co2_rate

SUPPLEMENT

cs_stimJobStage.xsd cleanVol DM_STIM_STAGE_- clean_vol

SUPPLEMENT

cs_stimJobStage.xsd slurryVol DM_STIM_STAGE_- slurry_vol

SUPPLEMENT

5000.1.13 Page 141 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimJobStage.xsd wellheadVol DM_STIM_STAGE_- wellhead_vol
SUPPLEMENT

cs_stimJobStage.xsd maxPmaxPacPres DM_STIM_STAGE_- max_pmax_pac_pres

SUPPLEMENT

cs_stimJobStage.xsd maxPmaxWLPres DM_STIM_STAGE_- max_pmax_wl_pres

SUPPLEMENT

cs_stimJobStage.xsd maxGelRate DM_STIM_STAGE_- max_gel_rate

SUPPLEMENT

cs_stimJobStage.xsd maxOilRate DM_STIM_STAGE_- max_oil_rate

SUPPLEMENT

cs_stimJobStage.xsd maxAcidRate DM_STIM_STAGE_- max_acid_rate

SUPPLEMENT

cs_stimJobStage.xsd avgGelRate DM_STIM_STAGE_- avg_gel_rate

SUPPLEMENT

cs_stimJobStage.xsd avgOilRate DM_STIM_STAGE_- avg_oil_rate

SUPPLEMENT

cs_stimJobStage.xsd avgAcidRate DM_STIM_STAGE_- avg_acid_rate

SUPPLEMENT

cs_stimJobStage.xsd gelVolume DM_STIM_STAGE_- gel_volume

SUPPLEMENT

cs_stimJobStage.xsd oilVolume DM_STIM_STAGE_- oil_volume

SUPPLEMENT

cs_stimJobStage.xsd acidVolume DM_STIM_STAGE_- acid_volume

SUPPLEMENT

cs_stimJobStage.xsd cleanBypassVolume DM_STIM_STAGE_- clean_bypass_volume

SUPPLEMENT

cs_stimJobStage.xsd frictionFactor DM_STIM_STAGE friction_casing

cs_stimJobStage.xsd stageFluid

cs_stimFluid.xsd When the cs_stimFluid

object is found in the
file, create a new
DM_STIM_FLUID
record with a unique
sequence number. Put
its key into the current
DM_STIM_FLU-

cs_stimFluid.xsd nameFluid DM_STIM_FLUID fluid_name

cs_stimFluid.xsd fluidVol DM_STIM_FLUID volume_pumped do not import. Create a

new schedule record.
Link to the current fluid
record (fill in the key).

cs_stimFluid.xsd waterSource

cs_stimFluid.xsd stimAdditive

cs_stimFluid.xsd stimProppant

cs_stimAdditive.xsd New DM_STIM_FLU-

ID_ADD record

cs_stimAdditive.xsd nameAdd DM_STIM_FLUID_ADD additive_name truncate to 25 if neces-

sary; schema allows 64

5000.1.13 Page 142 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimAdditive.xsd typeAdd DM_STIM_FLUID_ADD additive_type truncate to 32 if neces-
sary

cs_stimAdditive.xsd volume DM_STIM_FLUID_ADD amount_used import without unit

conversion and add
uom (e. g. "galUS") to
DM_STIM_FLU-
ID_ADD.additive_unit
truncate to 32 if neces-
sary

cs_stimProppant.xsd

cs_stimProppant.xsd nameProppant DM_STIM_FLU- proppant_name truncate to 16 if neces-

ID_SCHEDULE sary; schema allows 64

cs_stimProppant.xsd typeProppant DM_STIM_FLU- proppant_name Append the type to the

ID_SCHEDULE name inside square
brackets. If the result
exceeds 16 charac-
ters, truncate to 16.

cs_stimProppant.xsd weight DM_STIM_FLU- proppant_used

ID_SCHEDULE

cs_stimProppant.xsd sieveSize DM_STIM_FLU- proppant_size

ID_SCHEDULE

cs_stimPDatSes- New DM_STIM_PUMP-

sion.xsd ING_DIAG under
DM_STIM_TREATMENT

cs_stimPDatSes- sessionName DM_STIM_PUMP- session_name

sion.xsd ING_DIAG

cs_stimPDatSes- description DM_STIM_PUMP- description

sion.xsd ING_DIAG

cs_stimPDatSes- sessionNumber DM_STIM_PUMP- session_number

sion.xsd ING_DIAG

cs_stimPDatSes- pumpOnTime DM_STIM_PUMP- pump_on_time

sion.xsd ING_DIAG

cs_stimPDatSes- pumpOffTime DM_STIM_PUMP- pump_off_time

sion.xsd ING_DIAG

cs_stimPDatSes- shutInTime DM_STIM_PUMP- shutin_time

sion.xsd ING_DIAG

cs_stimPDatSes- fracCloseTime DM_STIM_PUMP- frac_close_time

sion.xsd ING_DIAG

cs_stimPDatSes- pumpDuration DM_STIM_PUMP- pump_duration

sion.xsd ING_DIAG

cs_stimPDatSes- avgBottomHoleTreat- DM_STIM_PUMP- avg_bh_treatment_-

sion.xsd mentPressure ING_DIAG pressure

cs_stimPDatSes- BhHydrostaticPressure DM_STIM_PUMP- bh_hydrostatic_pres-

sion.xsd ING_DIAG sure

cs_stimPDatSes- bubblePointPressure DM_STIM_PUMP- bubble_point_pressure

sion.xsd ING_DIAG

cs_stimPDatSes- fractureClosePressure DM_STIM_PUMP- fracture_close_pres-

sion.xsd ING_DIAG sure

cs_stimPDatSes- frictionPressure DM_STIM_PUMP- friction_pressure

sion.xsd ING_DIAG

cs_stimPDatSes- initialSIPressure DM_STIM_PUMP- initial_si_pressure

sion.xsd ING_DIAG

5000.1.13 Page 143 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimPDatSes- porePressure DM_STIM_PUMP- pore_pressure
sion.xsd ING_DIAG

cs_stimPDatSes- avgBHTreatmentRate DM_STIM_PUMP- avg_bh_treat-

sion.xsd ING_DIAG ment_rate

cs_stimPDatSes- fluidDensity DM_STIM_PUMP- fluid_density

sion.xsd ING_DIAG

cs_stimPDatSes- cleanVolume DM_STIM_PUMP- clean_volume

sion.xsd ING_DIAG

cs_stimPDatSes- wellBoreVolume DM_STIM_PUMP- wellbore_volume

sion.xsd ING_DIAG

cs_stimPDatSes- surfaceMD DM_STIM_PUMP- surface_md

sion.xsd ING_DIAG

cs_stimPDatSes- bottomHoleMD DM_STIM_PUMP- bottom_hole_md

sion.xsd ING_DIAG

cs_stimPDatSes- midPerforationsMD DM_STIM_PUMP- mid_perforations_md

sion.xsd ING_DIAG

cs_stimPDatSes- midPerforationsTVD DM_STIM_PUMP- mid_perforations_tvd

sion.xsd ING_DIAG

cs_stimPDatSes- surfaceTemperature DM_STIM_PUMP- surface_temperature

sion.xsd ING_DIAG

cs_stimPDatSes- bottomHoleTempera- DM_STIM_PUMP- bottom_hole_tempera-

sion.xsd ture ING_DIAG ture

cs_stimPDatSes- surfaceFluidTempera- DM_STIM_PUMP- surface_fluid_tempera-

sion.xsd ture ING_DIAG ture

cs_stimPDatSes- fluidCompressibility DM_STIM_PUMP- fluid_compressibility

sion.xsd ING_DIAG

cs_stimPDatSes- resevoirTotalCompress- DM_STIM_PUMP- res_total_compressibil-

sion.xsd ibility ING_DIAG ity

cs_stimPDatSes- fluidNPrimeFactor DM_STIM_PUMP- fluid_nprime_factor

sion.xsd ING_DIAG

cs_stimPDatSes- fluidKPrimeFactor DM_STIM_PUMP- fluid_kprime_factor

sion.xsd ING_DIAG

cs_stimPDatSes- fluidSpecificHeat DM_STIM_PUMP- fluid_specific_heat

sion.xsd ING_DIAG

cs_stimPDatSes- fluidThermalConductiv- DM_STIM_PUMP- fluid_thermal_conduc-

sion.xsd ity ING_DIAG tivity

cs_stimPDatSes- fluidThermalExpan- DM_STIM_PUMP- fluid_thermal_expan-

sion.xsd sionCoefficient ING_DIAG sion_coef

cs_stimPDatSes- fluidEfficiency DM_STIM_PUMP- fluid_efficiency

sion.xsd ING_DIAG

cs_stimPDatSes- foamQuality DM_STIM_PUMP- foam_quality

sion.xsd ING_DIAG

cs_stimPDatSes- percentPad DM_STIM_PUMP- percent_pad

sion.xsd ING_DIAG

cs_stimPDatSes- stageNumber DM_STIM_PUMP- stage_number

sion.xsd ING_DIAG

cs_stimPDatSes- temperatureCorrelat- DM_STIM_PUMP- is_temp_correlated_-

sion.xsd edCalculations ING_DIAG calc

5000.1.13 Page 144 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimStepTest.xsd New DM_STIM_-
STEP_TEST under cur-
rent
DM_STIM_PUMP-
ING_DIAG

cs_stimStepTest.xsd pressure DM_STIM_STEP_TEST pressure

cs_stimStepTest.xsd bottomHoleRate DM_STIM_STEP_TEST bottom_hole_rate

cs_stimStepTest.xsd fractureExtensionPres- DM_STIM_STEP_TEST fracture_extension_-

sure pressure

cs_stimReservoirInter- New
val.xsd DM_STIM_RES_INTER-
VAL under current
DM_STIM_TREATMENT

cs_stimReservoirInter- lithTopMD DM_STIM_RES_INTER- lith_top_md

val.xsd VAL

cs_stimReservoirInter- lithBottomMD DM_STIM_RES_INTER- lith_bottom_md

val.xsd VAL

cs_stimReservoirInter- lithFormationPerme- DM_STIM_RES_INTER- lith_formation_perme-

val.xsd ability VAL ability

cs_stimReservoirInter- lithYoungsModulus DM_STIM_RES_INTER- lith_youngs_modulus

val.xsd VAL

cs_stimReservoirInter- lithPorePressure DM_STIM_RES_INTER- lith_pore_pressure

val.xsd VAL

cs_stimReservoirInter- lithNetPayThickness DM_STIM_RES_INTER- lith_net_pay_thickness

val.xsd VAL

cs_stimReservoirInter- lithName DM_STIM_RES_INTER- lith_name

val.xsd VAL

cs_stimReservoirInter- netPayTopMD DM_STIM_RES_INTER- net_pay_top_md

val.xsd VAL

cs_stimReservoirInter- netPayBottomMD DM_STIM_RES_INTER- net_pay_bottom_md

val.xsd VAL

cs_stimReservoirInter- netPayGrossThickness DM_STIM_RES_INTER- net_pay_gross_thick-

val.xsd VAL ness

cs_stimReservoirInter- netPayNetPayThickness DM_STIM_RES_INTER- net_pay_net_pay_thick

val.xsd VAL ness

cs_stimReservoirInter- netPayPorePressure DM_STIM_RES_INTER- net_pay_pore_pres-

val.xsd VAL sure

cs_stimReservoirInter- netPayFluidCompress- DM_STIM_RES_INTER- net_pay_fluid_com-

val.xsd ibility VAL pressibility

cs_stimReservoirInter- netPayFluidViscosity DM_STIM_RES_INTER- net_pay_fluid_viscosity

val.xsd VAL

cs_stimReservoirInter- netPayName DM_STIM_RES_INTER- net_pay_name

val.xsd VAL

cs_stimReservoirInter- netPayFormationPer- DM_STIM_RES_INTER- net_pay_forma-

val.xsd meability VAL tion_permeability

cs_stimReservoirInter- lithPoissonsRatio DM_STIM_RES_INTER- lith_poissons_ratio

val.xsd VAL

cs_stimReservoirInter- netPayFormationPoros- DM_STIM_RES_INTER- net_pay_forma-

val.xsd ity VAL tion_porosity

5000.1.13 Page 145 of 283 July 2014

 OpenWells Software Release Notes

WITSML Schema WITSML Attri- EDM Table EDM Column EDM Import Rule
bute
cs_stimReservoirInter- lithFormationPorosity DM_STIM_RES_INTER- lith_formation_porosity
val.xsd VAL

cs_stimFetTest.xsd New
DM_STIM_FET_TEST
under current
DM_STIM_PUMP_DIAG

cs_stimFetTest.xsd startTime DM_STIM_FET_TEST start_time

cs_stimFetTest.xsd endTime DM_STIM_FET_TEST end_time

cs_stimFetTest.xsd endPDLDuration DM_STIM_FET_TEST end_pdl_duration

cs_stimFetTest.xsd fractureClosingDura- DM_STIM_FET_TEST fracture_closing_dura-

tion tion

cs_stimFetTest.xsd fractureClosingPres- DM_STIM_FET_TEST fracture_closing_pres-

sure sure

cs_stimFetTest.xsd fractureExtensionPres- DM_STIM_FET_TEST fracture_extension_-

sure pressure

cs_stimFetTest.xsd netPressure DM_STIM_FET_TEST net_pressure

cs_stimFetTest.xsd porePressure DM_STIM_FET_TEST pore_pressure

cs_stimFetTest.xsd pseudoRadialPressure DM_STIM_FET_TEST pseudo_radial_pres-

sure

cs_stimFetTest.xsd fractureLength DM_STIM_FET_TEST fracture_length

cs_stimFetTest.xsd fractureWidth DM_STIM_FET_TEST fracture_width

cs_stimFetTest.xsd fluidEfficiency DM_STIM_FET_TEST fluid_efficiency

cs_stimFetTest.xsd pDLCoef DM_STIM_FET_TEST pdl_coef

cs_stimFetTest.xsd residualPermeability DM_STIM_FET_TEST residual_permeability

cs_stimPumpFlowBack- New
Test.xsd DM_STIM_PUMP_F-
B_TEST under current
DM_STIM_PUMP_DIAG

cs_stimPumpFlowBack- fractureCloseDuration DM_STIM_PUMP_F- fracture_close_dura-

Test.xsd B_TEST tion

cs_stimPumpFlowBack- fractureClosePressure DM_STIM_PUMP_F- fracture_close_pres-

Test.xsd B_TEST sure

WITSML to EDM Unit Mappings

The following table outlines the units used when mapping data from the
WITSML 1.3.1 XML file generated in the Halliburton SUMMIT application to
the EDM Database

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
compressibilityUom
1/psi 93 1/psi Type 19, fluid compressibility

5000.1.13 Page 146 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
1/upsi
1/Pa 90 1/Pa Type 19, fluid compressibility
1/bar 358 1/bar Type 19, fluid compressibility
1/kPa 91 1/kPa Type 19, fluid compressibility
1/pPa
densityMeasure
densityUom
kg/m3 51 kg/m Type 14, density
10Mg/m3
dAPI 62 deg API Type 14, density
g/cm3 49 g/cc Type 14, density
g/dm3
g/galUK
g/galUS
g/L 555 g/L Type 14, density
g/m3
grain/ft3
grain/galUS
grain/100ft3
kg/dm3
kg/L 58 kg/L Type 14, density
Mg/m3
lbm/10bbl
lbm/bbl 50 lbm/bbl Type 14, density
lbm/ft3 52 lbm/ft Type 14, density
lbm/galUK
lbm/1000galUK
lbm/galUS 57 ppg Type 14, density
lbm/1000galUS 463 lbm/1000gal Type 14, density
lbm/in3
lbm/Mbbl

5000.1.13 Page 147 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
mg/dm3
mg/galUS
mg/L 61 mg/L Type 14, density
mg/m3
ug/cm3
dimensionlessUom
Euc
% 154 % Type 29, dimensionless
cEuc
mEuc
nEuc
uEuc
dynamicViscosityMeasure
dynamicViscosityUom
Pa.s 254 Pa*s Type 48, viscosity
cP 256 cp Type 48, viscosity
P
psi.s
dyne.s/cm2
kgf.s/m2
lbf.s/ft2
lbf.s/in2
mPa.s 259 mPa*s Type 48, viscosity
N.s/m2
forcePerVolumeUom
N/m3
atm/100m
atm/m
bar/km
bar/m 174 bar/m Type 33, pressure gradient
GPa/cm

5000.1.13 Page 148 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
kPa/100m 381 kPa/100m Type 70, frictional loss
kPa/m 168 kPa/m Type 33, pressure gradient
lbf/ft3
lbf/galUS
MPa/m
psi/ft 167 psi/ft Type 33, pressure gradient
psi/100ft
psi/kft 54 psi/kft Type 14, density
psi/m
Pa/m
atm/ft
lengthMeasure
lengthUom
m 121 m Type 24, length
angstrom
chBnA
chBnB
chCla
chSe
chUS
cm 127 cm Type 24, length
dm
fathom
fm
ft 122 ft Type 24, length
ftBnA
ftBnB
ftBr(65)
ftCla
ftGC
ftInd

5000.1.13 Page 149 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
ftInd(37)
ftInd(62)
ftInd(75)
ftMA
ftSe
ftUS
in 124 in Type 24, length
in/10
in/16 126 16th" Type 24, length
in/32 120 32nd" Type 24, length
in/64 123 64th" Type 24, length
inUS 124 in Type 24, length
km 303 km Type 24, length
lkBnA
lkBnB
lkCla
lkSe
lkUS
mGer
mi 304 mi Type 24, length
mil
miUS
mm 128 mm Type 24, length
Mm
nautmi 462 nM Type 24, length
nm 462 nM Type 24, length
pm
um 125 m Type 24, length
yd 340 yard Type 24, length
ydBnA
ydBnB

5000.1.13 Page 150 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
ydCla
ydIm
ydInd
ydInd(37)
ydInd(62)
ydInd(75)
ydSe
massMeasure
massUom
kg 135 kg Type 25, mass
ag
ct
cwtUK
cwtUS
g 131 gram Type 25, mass
grain
klbm 132 klbm Type 25, mass
lbm 136 lbm Type 25, mass
Mg
mg
oz(av)
oz(troy)
ozm
sack94 315 94lb sacks Type 25, mass
t 130 ton Type 25, mass
tonUK
tonUS
ug
massPerLengthMeasure
massPerLengthUom
kg/m 139 kg/m Type 26, mass per distance
klbm/in

5000.1.13 Page 151 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
lbm/ft 138 lbm/ft Type 26, mass per distance
Mg/in
kg.m/cm2 357 kg/cmm Type 14, density

PercentUom 154 % Type 29, dimensionless

permeabilityMeasure
permeabilityUom
D 63 darcy Type 15, effective permeability
mD 65 md Type 15, effective permeability
powerMeasure
powerUom
W 159 Watt Type 31, power
ch
CV
ehp
GW
hhp 225 MJ Type 44, ton-mile
hp 160 hp Type 31, power
kcal/h
kW 158 kW Type 31, power
MJ/a
MW
mW
nW
ton of refrig
TW
uW
pressureMeasure
pressureUom
Pa 190 Pa Type 34, pressure
at
atm 367 atm Type 34, pressure

5000.1.13 Page 152 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
bar 186 bar Type 34, pressure
cmH2O(4degC)
dyne/cm2
GPa 179 GPa Type 34, pressure
hbar
inH2O(39.2F) 191 inH2O Type 34, pressure
inH2O(60F)
inHg(32F) 177 in-Hg Type 34, pressure
inHg(60F)
kgf/cm2 182 kgf/cm Type 34, pressure
kgf/mm2
kN/m2
kPa 188 kPa Type 34, pressure
kpsi 189 ksi Type 34, pressure
lbf/ft2
lbf/100ft2 187 lbf/100ft Type 34, pressure
lbf/in2
mbar 184 mbar Type 34, pressure
mmHg(0C) 178 mm-Hg Type 34, pressure
mPa 425 MPa Type 74, pressure change
MPa 181 MPa Type 34, pressure
Mpsi 180 Mpsi Type 34, pressure
N/m2
N/mm2
Pa(g)
pPa
psi 185 psi Type 34, pressure
psia
psig 370 psig Type 34, pressure
tonfUS/ft2
tonfUS/in2

5000.1.13 Page 153 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
torr
ubar 359 E-06/bar Type 19, fluid compressibility
umHg(0C)
uPa
upsi 362 E-06/psi Type 19, fluid compressibility
specificHeatCapacityMeasure
specificHeatCapacityUom
J/kg.K 331 joule/gK Type 63, specific heat capacity
Btu/lbm.degF 333 BTU/lbmF Type 63, specific heat capacity
Btu/lbm.degR
cal/g.K
J/g.K
kcal/kg.degC 334 kcal/kgC Type 63, specific heat capacity
kJ/kg.K
kW.h/kg.degC 373 kW-hr/kg-C Type 63, specific heat capacity
thermalConductivityUom
W/m.K
Btu/hr.ft.degF 335 BTU/hftF Type 64, thermal conductivity
cal/h.cm.degC
kcal/h.m.degC
cal/s.cm.degC
thermodynamicTemperatureMeasure
thermodynamicTemperatureUom
K 429 K Type 75, temperature change
degC 212 C Type 41, temperature
degF 213 F Type 41, temperature
degR 376 R Type 41, temperature
timeMeasure
timeUom
s 215 sec Type 42, time
a
cs

5000.1.13 Page 154 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
d 218 days Type 42, time
Ga
h 214 hr Type 42, time
100s
Ma
min 216 min Type 42, time
ms 47 mS Known issues (type 12), do not
use
ms/2
ns
ps
us
wk
100ka
velocityMeasure
velocityUom
m/s 248 m/s Type 47, velocity
cm/a
cm/s
dm/s
ft/d 251 ft/day Type 47, velocity
ft/h 246 ft/hr Type 47, velocity
ft/min 249 ft/min Type 47, velocity
ft/ms
ft/s 250 ft/s Type 47, velocity
ft/us
in/a
in/min
in/s
kft/h 241 kft/hr Type 47, velocity
kft/s
km/h 252 km/hr Type 47, velocity

5000.1.13 Page 155 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
km/s
knot 244 knots Type 47, velocity
m/d 242 m/day Type 47, velocity
m/h 245 m/hr Type 47, velocity
m/min 247 m/min Type 47, velocity
m/ms
mi/h 243 mph Type 47, velocity
mil/yr
mm/a
mm/s
nm/s
um/s
volumeFlowRateMeasure
volumeFlowRateUom
m3/s 70 m/s Type 16, flow
bbl/d 66 bbl/D Type 16, flow
bbl/hr 453 bbl/hr Type 16, flow
bbl/min 80 bbl/min Type 16, flow
cm3/30min 455 cc/30min Type 16, flow
cm3/h
cm3/min
cm3/s
dm3/s
ft3/d 68 ft/D Type 16, flow
ft3/h
ft3/min 78 ft/min Type 16, flow
ft3/s 77 ft/s Type 16, flow
galUK/d
galUK/hr
galUK/min
galUS/d

5000.1.13 Page 156 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
galUS/hr
galUS/min 75 gpm Type 16, flow
kbbl/d
1000ft3/d
1000m3/d
1000m3/h
L/h
L/min 79 L/min Type 16, flow
L/s
m3/d 72 m/D Type 16, flow
m3/h 73 m/hr Type 16, flow
m3/min
Mbbl/d
M(ft3)/d
M(m3)/d
volumeMeasure
volumeUom
m3 287 m Type 53, volume
acre.ft
bbl 285 bbl Type 53, volume
bcf
cm3 292 cc Type 53, volume
dm3 492 dm Type 53, volume
flozUK
flozUS
ft3 284 ft Type 53, volume
galUK
galUS 286 gal Type 53, volume
ha.m
hL
in3 288 in Type 53, volume

5000.1.13 Page 157 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
1000ft3
km3
L 291 L Type 53, volume
Mbbl
Mcf
M(ft3)
mi3
mL 283 mL Type 53, volume
M(m3)
mm3 289 mm Type 53, volume
MMbbl
ptUK
ptUS
qtUK
qtUS
tcf
um2.m
yd3
volumePerVolumeMeasure
volumePerVolumeUom
Euc
% 154 % Type 29, dimensionless
permil
ppdk
ppk
ppm 39 ppm Type 10, concentration
bbl/acre.ft
bbl/bbl 477 bbl/bbl Type 61, liquid concentration
(vol/vol)
bbl/ft3
bbl/100bbl
bbl/k(ft3)

5000.1.13 Page 158 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
bbl/M(ft3)
cm3/cm3
cm3/m3
dm3/m3
ft3/bbl 310 scf/bbl Type 60, volume ratio
ft3/ft3 321 ft/ft Type 61, liquid concentration
(vol/vol)
galUS/kgalUS
galUK/kgalUK
galUK/ft3
galUK/Mbbl
galUS/bbl
galUS/10bbl
galUS/ft3
galUS/Mbbl
1000ft3/bbl
ksm3/sm3
L/10bbl
L/m3 323 L/m Type 61, liquid concentration
(vol/vol)
m3/ha.m
m3/m3 396 m/m Type 60, volume ratio
M(ft3)/acre.ft
mL/galUK
mL/galUS
mL/mL 38 mL/mL Type 10, concentration
MMbbl/acre.ft
MMscf60/stb60
Mscf60/stb60 473 Mscf/bbl Type 60, volume ratio
ptUK/Mbbl
ptUS/10bbl
pu

5000.1.13 Page 159 of 283 July 2014

 OpenWells Software Release Notes

WITSML Unit Type WITSML Unit of EDM ID EDM Label EDM Type
Measure
scm15/stb60
sm3/ksm3
sm3/sm3
stb60/MMscf60
stb60/MMscm15
stb60/Mscf60
stb60/Mscm15
stb60/scm15

Release 5000.1.3

New platforms are supported.

Release 5000.1.2

The 5000.1.2 release is an incremental update of OpenWells software. The primary

focus of this update has been to enhance the user experience and to expedite user
workflows. This has been accomplished through the addition of a number of features
including:

Stimulation Report
Treatments area in the Stimulation Report - The Treatments area allows users
to record multiple treatment intervals in one Stimulation Report.
WYSIWYG - The Stimulation report now comes with a WYSIWYG (What You
See Is What You Get) data entry form.
Volume Pumped calculation - The Volume Pumped calculation has a new
System Setting to allow administrator to change how this field is calculated.

Batch Printing

Batch printing has been improved to help to free up the users time so they can
concentrate on other important aspects of their job. Output Reports can now:
be printed for multiple Projects, Sites, Wells, Wellbores and Events,
be collated into one print job,
be saved to one or multiple PDF files,
have sections included/removed during the print job.

5000.1.13 Page 160 of 283 July 2014

 OpenWells Software Release Notes

In addition, once a Batch print job has been set up, the application can be set to
remember it for the next time the Print Wizard is opened.

Improved Default Security

Changes to the Administration tokens allow Companies to delegate the
Administration role among a number of different users.

Stimulations Report
The Stimulation Report has a number of improvements and additions to better
enable users to enter stimulation jobs in a manner that better reflects the actual
process of running a stimulation job and improves on the ease of use of the report.

Treatment Intervals
A Treatments section has been added to the form, to enable users to enter
multiple Treatment Intervals for each Stimulation Job. This will help to alleviate
the creation of multiple Stimulation reports for one Stimulation Job.

5000.1.13 Page 161 of 283 July 2014

 OpenWells Software Release Notes

Figure 1: New Stimulation Treatments section

WYSIWYG (What You See is What You Get)

A WYSIWYG form has been added for the Stimulations report. This form is
meant to simplify data entry and allow rig users to enter data on a form that is
similar to the spreadsheet generally used in the field.

5000.1.13 Page 162 of 283 July 2014

 OpenWells Software Release Notes

Figure 58: Upper section of the Stimulation WYWIWYG form

The WYSIWYG form also has an area that shows Rollup data. This area is color
coordinated to show users which fields are used in the rollup.

Figure 59: Mid section of the Stimulation WYWIWYG form. The fields used in the cal-
culations are color coordinated within the rollup area

5000.1.13 Page 163 of 283 July 2014

 OpenWells Software Release Notes

The WYSIWYG form can be configured to automatically add a specified

number of Fluids and Treatments and schedule Steps in the form when it is
created.

The number of fluids, treatments and subsequent steps can be customized by

modifying the StimulationLayout.xml WYSIWYG file and importing the modified
file as a custom WYSIWYG for the Stimulation report. This is done through the
EDM Administration Utility (see the online help system for detailed instructions).

By default, the WYSIWYG that ships with the application defines one Fluid and
one Treatment that includes a multiple step schedule encompassing a PAD, a
FET, Several Pad-Laden stages and a FLUSH.

Figure 60: Lower section of the Stimulation WYWIWYG form. This screenshot shows
a form that has been configured to automatically create two Treatments when the
report was created along with a pre-defined list of Steps.

Volume Pumped Calculation

A new system setting, StimTreatmentVolumeMethod, has been added that
defines the calculation method of the Volume Pumped in the Stimulation report
as follows:

5000.1.13 Page 164 of 283 July 2014

 OpenWells Software Release Notes

When set to Default, Volume Pumped is calculated as the sum of the

volumes recorded in the Volume Pad, Volume Body, and Volume
Afterflush.
When set to VolumePumpedRollup, Volume Pumped is calculated as
the sum of the Clean Stage column in the WYSIWYG form's Step
spreadsheet.

Batch Printing
The process for printing multiple Output Reports in the OpenWells application
has been streamlined in this release. Output Reports can now be printed for
multiple Projects, Sites, Wells, Wellbores and Events and collated into one print
job. Reports can be saved to one or multiple PDF files and sections can be
removed during the print job. In addition, once the print job has been set up, the
application can be set to remember it the next time the Print Wizard is opened.
Each aspect of batch printing helps to free up the users time allowing them to take
care of other important aspects of their job.

Batch Printing has been implemented in the Print Wizard, accessed from the File
> Print Wizard command or from the toolbar button.

Printing Reports from Multiple Projects, Sites, Wells, Wellbores and Events
From the Print Wizard, a users can find a Well using the button and
select the appropriate Wellbore and Event. The user can then select the reports to
be printed and move them into the Reports selected area. Once all the reports have
been selected, the users can change the Well, Wellbore and/or Event to add more
reports to be printed.

Remember the List of Selected Reports

The Remember Selected Reports checkbox causes the application to remember
the list of selected reports. This enables the user to come back to the Print Wizard
the next day and print the same list of Reports for the current day.

5000.1.13 Page 165 of 283 July 2014

 OpenWells Software Release Notes

Figure 61: Print Wizard showing the remembered Output Reports, only the date
changes

Print to PDF
Once the Output Reports have been selected, the user can choose to send these
reports to a printer or exported to a PDF file. When exporting to a PDF file you have
the choice to save all of the reports to one PDF file or create a PDF file for each
individual report. The individual PDF files will be saved to the same folder.

5000.1.13 Page 166 of 283 July 2014

 OpenWells Software Release Notes

Figure 62: Export to PDF allows you to merge the reports into one PDF file

Define Sections to be Printed

Whether sending the Output Reports to a printer or saving them to a PDF file, users
can choose the sections of each report to be included in the Output Report. In
addition, users can choose to include a Cover Page and Table of Contents for the
report. To send multiple reports at one time without any intervention select the Hide
report options dialog box checkbox. During batch printing, the most recent user
choices regarding sections will be honored. The user can set up choices by
individually printing a report via Print or Print Preview. If no choices have been
made the defaults (print all sections) will be used.

5000.1.13 Page 167 of 283 July 2014

 OpenWells Software Release Notes

Figure 63: Report Options appears for each report; user can select sections that will
appear in the PDF or Printed version. The Hide report options dialog box checkbox
can also be used to skip the Report Options dialog box.

Improved Default Security

Improvements have been made to the EDM Security model to allow EDM
Administrators to control who has access to the different areas of the EDM
Administration Utility. This helps to alleviate the possibility of unintended changes
within the configuration on a potential daily basis.

The Admin.start token controls which users area able to launch the EDM
Administration Utility application. The Admin.Security.edit token now controls
which uses are able to grant and revoke access to the various EDM Administrators.
These administrators can grant or revoke access to the various parts of the EDM
Administration Utility using the following list of tokens.

Token Description
Admin.CarryOver.edit Controls access to the OpenWells Carryover area
Admin.DataValidation.edit Controls access to the OpenWells Data Validation area
Admin.JobTypes.edit Controls access to the OpenWells Job Types area
Admin.LayoutManager.edit Controls access to the OpenWells Layout Manager area
Admin.OpenwireConfig.edit Controls access to the OpenWire Configuration area
Admin.OutputReports.edit Controls access to the Output Reports area

5000.1.13 Page 168 of 283 July 2014

 OpenWells Software Release Notes

Token Description
Admin.OutputReports.Land- Controls access to the Landmark shipped Output Reports
mark.edit area
Admin.PreviewPanes.edit Controls access to the OpenWells Preview Panes area
Admin.ReportTypes.edit Controls access to the OpenWells Report Types area
Admin.SAM.edit Controls access to the Simultaneous Activity Monitor area
Admin.ShortcutBars.edit Controls access to the OpenWells Shortcut Bars area
Admin.StatusColors.edit Controls access to the OpenWells Status Colors area
Admin.SystemLookups.edit Controls access to the System Lookups area
Admin.SystemSettings.edit Controls access to the System Settings area

Release 5000.1.1

WELLCAT was added to the EDT suite of applications for the first time in the 5000.1.1
release. Also, some Common Well Explorer enhancements were made. (See EDT
Software for details). This update release improves the import/export and sharing of
Grades, Pipes/Connections between StressCheck and WELLCAT, improves the
integration between StressCheck and WELLCAT, and repairs critical defects affecting
key StressCheck and WELLCAT application functions. There were no additional
enhancements for the OpenWells software.

Release 5000.1.0

The 5000.1 release of Engineers Desktop supports the Microsoft Vista operating
system, has new LAM (FLEXnet Publisher) licensing and contains some critical bug
fixes.

The following enhancements were added to the OpenWire 5000.1 release. In addition,
features added in 2003.22, which were not included in the 5000.0 release are now
available in this 5000.1 release.

The primary focus of this release has been to enhance the user experience and to
expedite user workflows. This has been accomplished through the addition of a
number of features including:

Wizards for common workflows,

Create a Well
Create a Wellbore
Create an Event

5000.1.13 Page 169 of 283 July 2014

 OpenWells Software Release Notes

Create a Rig
Create a Daily Operations report
Create a Report

Todays Wells interactive graphic

Graphical Rig Equipment Editor
Inherent Rig Operations and Equipment entry
Improved Hole Sections data entry
Integration between the Engineering Hole Plans and Hole Sections area of the
OpenWells Well Planning Report,
Sub Assembly support
Output Reporting has been enhanced in thee following areas:
Allow for inclusion of COMPASS Plots and Wall Plot Composer Plots within the
OpenWells output reports.
Reformat several of the reports to look more technical and cleaner (e.g. Casing,
Cementing)

Wizard Toolbar
OpenWells offers a number of Wizards that enable you create, edit and view data,
without having to navigate through the Well Explorer tree. These Wizards are
accessed from the main application window toolbar. The toolbar can be toggled off
and on using the View > Wizard Bar command. A check mark appears next to the
menu item when the Status Bar is visible.

Figure 1: Wizard Toolbar

The Wizards available in the Wizard toolbar include the following:

Create Well - create a new Well and configure the Well Datum
Create Wellbore - create a new Wellbore
Create Event - create a new Event
Create Rig - create a new Rig

5000.1.13 Page 170 of 283 July 2014

 OpenWells Software Release Notes

Edit Rig - edit a Rig using the new Rig Equipment Editor (For more information
see Rig Equipment Editor on page 174.)
Create Daily Report - create a new Daily Operations report, associate a Rig and
create an AFE. The feature is discussed further in relation to Rig Operations
Association on New Rig Association Options on page 182.
Create Report - create any one of the available OpenWells reports
Todays Wells - determine the accuracy and completeness of your Well(s). This
feature is discussed further below.

Creation of Company, Project, Site and Contractor

Within the Create Well Wizard, a user with permission to the proper security
tokens, can create a new Company, Project and Site. This can be accomplished
by typing the name of the Company, Project and Site into the text boxes, instead
of selecting from the picklists. Using the same method, a user with permission to
the proper security tokens, can also create a Contractor within the Create Rig
Wizard.

Type names here

and

they are created here

Figure 64: Manually enter the Company, Project and Site names to create them in the
Well Explorer

5000.1.13 Page 171 of 283 July 2014

 OpenWells Software Release Notes

Find a Well
Each Wizard allows you to select the location in the hierarchy where the item will
be created. If you are unsure as to where a particular Well is in the hierarchy, then
use the Find a Well feature to perform a text based search for the Well.

The Find Well feature is accessed by clicking on the button. This button is
located in the Create Wellbore wizard, Create Event wizard, Create Daily Report
Wizard, Create New Report Wizard, Todays Wells dialog box and the Todays
Wells Favorites dialog box.

Enter the name or partial name of the Well you are looking for and click the Find
button. A list of Wells matching the text is displayed. Select a Well and click OK.

Figure 65: Find Well dialog box

Todays Wells (How is my Well Doing?)

The Todays Wells feature allows OpenWells users quickly determine the accuracy
and completeness of their Morning Report data, without having to navigate
through a number of Wells and Daily Operations reports in the application or their
printed Daily Drilling reports.

This feature displays a pictorial representation of the Well along with pertinent data
on the operation state of the Well for a given day. Based on the Wells Datum
information, either a Land or Offshore picture is displayed.

5000.1.13 Page 172 of 283 July 2014

 OpenWells Software Release Notes

Figure 66: Todays Wells for an Offshore Well

From the Today's Wells dialog box a user can:

review the daily status of Wells and Daily reports across multiple Events
review the daily status of each of the Wells with Daily reports on the chosen
date by scrolling through Favorites
create and maintain a list of Favorite Wells that are available each time the
Todays Wells dialog box is opened per user
remove wells from the Favorites list after a well is no longer active
immediately identify and navigate to Non-Productive Time and Safety incidents
navigate to the days Operations Summary, Survey data, Bit Details and
Operations, Pump and Shaker Operations
identify costs that have gone over the AFE estimate
identify measured depths that are behind plan
view a schematic of the Well
view planned and actual Depth vs Days or Cost vs Days graphs

5000.1.13 Page 173 of 283 July 2014

 OpenWells Software Release Notes

launch available Output reports for the Well associated with the Daily report
transfer the Well or Daily report to the office
refresh the Todays Wells data

Rig Equipment Editor

The Rig Equipment Editor provides a simple way to locate, edit and enter Rig data
in OpenWells using an interactive picture of a Rig. This feature is available from the
main applications window and from the Data Entry Form window. The Rig
Equipment Editor allows users to easily view and maintain their Rig and Rig
Equipment inventory, without having to navigate through the Contractors Tab
within the main application window.

Four variations of the Rig Equipment Editor are available and appear based on the
Rig Type defined. The assignment of rig types to the four graphics is done through
the System Setting RigTypeImages. Detailed information regarding utilization of
that setting is documented in the EDM Administration Utility online help, Configure
Rig Equipment Editor Images topic.

Generic types supported are Land Rig, Semi-Submersible, Jack-Up and Drill Ship.
The OpenWells System Administrator must map their Rig Types to one of these
through the above System Setting.

Figure 67: Rig Type as defined in the Rig Properties dialog box

5000.1.13 Page 174 of 283 July 2014

 OpenWells Software Release Notes

Figure 68: Land Rig image

Figure 69: Semi-Submersible Rig Image

5000.1.13 Page 175 of 283 July 2014

 OpenWells Software Release Notes

Figure 70: Drillship Rig Image

Figure 71: Jackup Rig Image

5000.1.13 Page 176 of 283 July 2014

 OpenWells Software Release Notes

Each Rig picture contains hotspots for Rig Equipment. When the mouse hovers
over a hotspot, the equipment type turns red and a brief summary of the
Equipment type is displayed.

Figure 72: Hover mouse over Pump displays read-only summary

Clicking on a hotspot opens a historical summary dialog box for the Equipment
type. From this Summary dialog box equipment can be created, edited and
deleted.

5000.1.13 Page 177 of 283 July 2014

 OpenWells Software Release Notes

Figure 73: Equipment Summary dialog box for Pumps

To access the Rig Equipment Editor, click the button appearing in the
Wizard Toolbar or the Data Entry form toolbar.

Edit Rig button

Figure 74: Edit Rig Button in the Wizard Toolbar and the Daily Operations form

If a Rig has not been associated with the Event, OpenWells allows you to associate
one when the button is selected from within the Daily Operations form.

5000.1.13 Page 178 of 283 July 2014

 OpenWells Software Release Notes

The Rig Properties dialog box can also be accessed from the Rig Nav Aid, by
clicking on the Rig Properties button, located below the picture.

The following links are available from each picture:

Land Rig - Boilers, BOP, Centrifuges, Degassers, Hydrocyclones, Motors, Pits,

Pumps and Shakers
Semi-submersible - Anchors, BOP, Centrifuges, Degassers, Hydrocyclones,
Motors, Pits, Pumps and Shakers
Drillship - BOP, Centrifuges, Degassers, Hydrocyclones, Motors, Pits, Pumps
and Shakers
Jackup - BOP, Centrifuges, Degassers, Hydrocyclones, Motors, Pits, Pumps
and Shakers

Improved Hole Sections Data Entry

The Daily Operations report, Hole Sections area has been changed to allow users
to more easily enter Hole Sections with an alternate entry layout. Administrators
can now configure the Hole Sections area to record detailed hole section data,
including annular details or to expedite the entry of hole section data, when annular
details area not required.

OpenWells offers the following two sample layouts in the EDM Administration
Utility:

Daily Non Complex Well - This configuration simplifies the Holes Sections
data entry to one spreadsheet. Using this spreadsheet a user could enter all
their information on a hole section, including Last and Next Casing data, in
under a minute.

Figure 75: Non Complex Well Hole Sections layout for quick data entry

5000.1.13 Page 179 of 283 July 2014

 OpenWells Software Release Notes

Daily Drilling - This configuration is intended for users who will be entering
detailed information on the hole section, including Next and Last Casing and the
details of the annulus.

Figure 76: Daily Drilling Hole Sections layout for detailed data entry

Integration between the Well Planning Report and Hole Sections

Hole Section data entered in PROFILE planned and prototype Designs are now
available from the OpenWells Well Planning report, Hole Plan section.
Simultaneous Activity Monitor (SAM) rules apply to multiple users viewing or
editing the Hole Plan data in either application.

When a Well Planning report is created in OpenWells and linked to a planned or

prototype Design, Hole Section data entered in PROFILE will automatically appear
in the Well Planning report. Likewise, changes and additions made to the Hole Plan
in OpenWells are reflected in the appropriate PROFILE Design.

5000.1.13 Page 180 of 283 July 2014

 OpenWells Software Release Notes

Figure 77: OpenWells and PROFILE Hole Plan

Within the Hole Sections of the Daily Report, the user will have the ability to copy
casings from a planned Casing for the Next Planned Casing information.

Figure 78: OpenWells Hole Section Select Planned Casing

Sub Assembly Support

Sub Assemblies created in PROFILE can be added or inserted into an OpenWells
Wellbore Equipment report if they were created in the ACTUAL design in
PROFILE.

5000.1.13 Page 181 of 283 July 2014

 OpenWells Software Release Notes

Figure 79: Sub Assembly shown in PROFILE

Figure 80: Sub Assembly menu opened and Sub Assembly inserted into Wellbore
Equipment Report in OpenWells

New Rig Association Options

Rig Association functionality has been improved upon through the following two
new features: Rig Association in the Create Daily Report wizard and the Daily
Operations report.

5000.1.13 Page 182 of 283 July 2014

 OpenWells Software Release Notes

Rig Association in the Create Daily Report Wizard

Rigs can now be associated when creating a Daily report using the Create Daily
Report button, available in the Wizard Toolbar. The button is now
available on the second page of the wizard. Clicking this button launches the
Associate Rig to Daily Wizard, which guides the user through the Rig Association
process. Once the association to the Rig has been made, the Daily Operations
form exposes Rig Equipment, such as Pumps and Shakers.

Figure 81: Associate Rig to Event in the Create Daily Report Wizard

Rig Association in the Daily Operations Report

Rigs can now be associated in the Daily Operations report form. The
button found can be found in each of the Daily reports Equipment Operations
section. Clicking this button launches the Associate Rig to Daily Wizard, which
guides the user through the Rig Association process. Once the association to the
Rig has been made, the Daily Operations form is automatically updated and
instantly exposes the Pumps, Shakers, etc.

5000.1.13 Page 183 of 283 July 2014

 OpenWells Software Release Notes

Associate
Rig Button

Figure 82: Associate Rig Button gives the user the choice to select a rig or create a
new one from within the Daily Operations form

Figure 83: Rig has been selected and the Rig Operation is created

5000.1.13 Page 184 of 283 July 2014

 OpenWells Software Release Notes

Figure 84: Rig Equipment Operations sections are refreshed and operations data can
be entered

Output Report Enhancements

The following output reports have been reformatted to include cover sheets, tables
of contents and have an overall cleaner and more technical look. Further
reformatting will continue in upcoming releases.

Casing
Cementing
Stimulation
Wellbore Equipment
Well Test
Well Planning
Perforation

5000.1.13 Page 185 of 283 July 2014

 OpenWells Software Release Notes

Figure 85: OpenWells 5000.1 Casing Report Page 1

A new feature to include both PROFILE Wall Plot Composer Plots and COMPASS
Plots within OpenWells output reports is now available. Below is an example of a
simple report which demonstrates a COMPASS 3D plot and a WallPlot called
Directional Plot from PROFILE.

5000.1.13 Page 186 of 283 July 2014

 OpenWells Software Release Notes

Figure 86: OpenWells 5000.1 COMPASS Plots and WPC Plots Example

Documentation on implementing this feature or the general schematics feature can

be found in the EDM Reporting User Manual.doc file distributed in the
Documentation folder under your EDT_5000.1 install directory (i.e.
C:\landmark\edt_5000.1\Documentation).

5000.1.13 Page 187 of 283 July 2014

 OpenWells Software Release Notes

OpenWells Fixed Issues

The OpenWells issues fixed for 5000.1.0 through 5000.1.13.0 are described below.

Release 5000.1.13

The following issues were fixed for the 5000.1.13.0 release of OpenWells.

Defect No. Description

898229 Supervisors recording NPT need the NPT Gross Time calculation to use the sum of
activity recorded during the operation so that it calculates correctly in scenarios
where the rig moves off of the well due to the NPT event and later returns.
899404 Pipe Tally - Importing Off Load into Run tally doesn't refresh properly.
927296 OpenWells can become unresponsive for minutes when receiving SAM reload
notifications.
931471 Production Equipment report "Associated report" picklist does not retain the selected
value after closing and reopening the report.
931474 "Associated report" picklist in Production Equipment report displays all the Plunger
lift report from all across Wells from all Companies in the Well Explorer.
931482 OpenWells is slow when loading daily operations reports which have over 200
surveys associated with them.
933723 Component names are not populated when importing a pipe tally into a casing
report.
935534 Data validation rule failure causing problem with locks.
938212 SAM reload notification is causing unsaved BHA data to be lost.
938901 Well Name does not populate on Lessons Learned dialog when certain tabs are
hidden.

Release 5000.1.12

The following issues were fixed for the 5000.1.12.0 release of OpenWells.

Defect No. Description

921745 Manual Rule Book Validation should not validate when user saves.
921744 As an OpenWells admin I need to be able to distinguish between two wellbores
which have the same legal/common names when moving operations reports.
921743 Excess Slurry Volume calculation is incorrect
921742 OpenWells will create a duplicate definitive survey header in scenarios where a
definitive survey header exists without an actual design.

5000.1.13 Page 188 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

921741 OpenWells data validation should prevent selection of 'Section Complete' when
mandatory rules fail
921740 As a rig supervisor i need to have the data validation on my operations entry screen
run whenever I check the "section complete" check box.
918555 CD_WELLBORE_OPENING needs wellbore_formation_id and reservoir_id to match
what is in CD_PERF_INTERVAL.
880518 Require the ability to combine sections from Stimulation and Perforation reports into
one report when using the Interactive Wellsite Interface.

Release 5000.1.11

The following issues were fixed for the 5000.1.11 release of OpenWells software.

Defect No. Description

706568 No method available to delete Well Explorer filters
785924 Pipe Tally calc Total Length Run is not updating when new pipe lengths are changed
853098 Create an option to Change Sacks Used unit from 94 lb to 110 lb
853753 Fix fields in Casing Jewelry spreadsheet to show Jewelry in Schematic
853863 Conventional Pump fields needed
854707 Request that Porosity field be added to the Reservoir tab within the Wellbore Zones
tab in Wellbore Properties (i.e. CD_WELLBORE_ZONE.porosity)
856962 User wants Lease and Road Description information for Driving Instructions at Well
level instead of Site level
858805 OpenWells Casing Component Section Type picklists showing Tubing, Bit etc for
certian Casing Assemblies
860579 Reports updated in the database are not seen by users unless they clear the report
cache.
860640 Make up thread loss should be applied to each joint and properly represented in the
pipe tally spreadsheet itself and not just the total setting depth for the assembly.
861857 Date/Time not updated in Time Summary (DM_ACTIVITY tab) after report date cor-
rected
862333 Request new Component types for use in OpenWells
865651 Request for Strat Units to sort when the user clicks the desired field header.
868843 The input in the well planning report Planned Operations is listed as Target Time
(days). However, the chart is plotted as though the values were Target Time (hours).
872603 Cyrillic character support in Properties Dialog Area Title

5000.1.13 Page 189 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

873550 Updated output reports transfered to rigs via EDM Autosync are not displayed to the
user unless the report cache is deleted.
873758 Need a way to reset Cum Ton Miles in Safety section when a cable is replaced.
873995 Request control over the size of the report window for Print Preview or request full
screen size for this window.
874422 Total Gross Cost should replace Total Net Cost to accurately reflect how this data
should be presented
876654 Lesson Print Preview not available with Russian regional settings
879377 Copy from Previous BHA Operation and Copy from Previous Bit Operation buttons
are not working properly.
879501 Improved performance when associating rig to anchor operations.
879745 SAM is locking the Daily report when the user only has read-only access, Therefore
users with edit rights cannot edit the report while it is open by the read-only users.
880101 Fluid and Proppant totals are cumulative each time a user presses the "update fluids
and proppants" button in the stimulation report.
880233 Formation names do not display properly when carried over in the Perforation
Report.
880460 Request System Setting to turn on or turn off the setting of Rig Operation End Dates
from Event End Date.
880501 Frac Focus Report needs to be renamed to Frac Report.
880521 Lessons Learned "actual value" is displaying as a cost when it should be a comment.
880965 When creating a new well the default value indicating if the well is offshore is null
instead of 'N', this is inconsistent with Compass.
881059 Update to Intervals Job Start Date/Time and Job End Date/Time in Perforation entry
form should not affect Time in Perforations General Job Start and End Date/Time
881227 DDR does not display BHA's component type values in column when emailed out
through EPS
882081 OpenWells Rocket does not honor BottomToTop setting in BHA Run Component
spreadsheet
882141 Open Wells : Pipe Tally Report Threads on/Off issue
882260 Administrators need to be able to modify the contents of the email body generated by
EPS when email reports to partners.
883547 Differences with Planned Curve in Depth vs Days Report (Generated from Today's
Wells and Event)
883742 Need the abiltiy to identify Time summary operations that are currently in NPT in the
WYSIWYG and micropage xmls.
883885 WYSIWYG BHA Show All option has incorrect amount on the footage field on the
BHA record.

5000.1.13 Page 190 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

884101 Differences between Unit Converter and Halliburton Unit Converter (Test Report)
884317 Well Planning Report Drillstring program doesn not have a flip order button for users
who enter from BIT to Drillstring (like in DDR Drillsrtings)
884541 DM_ENVIROMENTAL.mud_vol_pit_reserve calculated fiield does not calculate any-
thing
884768 Cannot use Data Dictionary in WYSIWYG forms for spreadsheet columns.
885071 When VCR Button is used to save changes to Support Craft - OpenWells freezes.
885197 Link or Button that updates the Daily Geology - Mud Data section from the Daily
Operations - Fluids section
885455 OpenWells Wysiwyg - Customized Daily Wysiwyg with Survey Spreadsheet does not
support Tie On link Property Dialog.
887321 Casing, Pipe Tally etc. reports don't display via toolbar during creation when these
reports are not associated with the <no groups> tight group.
890403 As an administrator configuring the interactive well site I need to be able to custom-
ize the labels corresponding to the links in the activity dialog.
892053 Request that the On-line help formula for Closure Azimuth be corrected.
892316 Performance improvements to the well test report.
892318 OpenWells does not update event properties showing rig operations information
when receiving SAM messages.
892774 Need the ability to document fiber optic lines as umbilicals on casing strings in Profile
and OpenWells.
893018 Request capability to enter Horizontal Length in the Wellbore Properties.
893374 Request sort on date/time for Flowing Well Test Method in Test Report -> Test Sec-
tion.
894347 Reports can be dragged and dropped even though token is revoked.
894364 Remove depth restrictions preventing appropriate strings from being selected in the
Wellbore Equipment: Located Inside Field.
896204 Request to change the date displayed on the subject line of the email for Summary
Reports generated by EPS.
896515 Request to remove non-applicable text in the email for Summary Reports generated
by EPS.
896583 Enable rushmore related wellbore attributes.
897027 Add the option to disable the Interacitve Wellsite animations at startup.
897207 Unable to insert stations after import using Today's Survey Stations area
897443 Importing large amounts of data in Rocket/Interactive causes an application crash
with error "Java engine stopped running".

5000.1.13 Page 191 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

898347 Request System Setting on Last Trip Drill field DM_Safety.date_trip_Drill to turn off
internal validation requiring that a date be entered.
898512 NPD CDRS EPIM Extract Update Required as of Oct 1, 2012 (version 1.2.1) - Also
add new fields for CD_WELL to track HPHT and TIGHT status.
898738 Require Umbilicals Support in Casing Report for OpenWells.
899316 Error generating NPD xml, but it does not affect submission for NPD
899880 Daily Ops: Drillstring additional fields enhancement request
901631 Documentation on Test tab in the Fluids section of the Cement report.
903383 Request capability to customize the To: field for EPS e-mails.
903967 OpenWells memory issue when using the Find dialog tool.
904451 Inconsistent use of casing components fields for thread type when selecting from
catalog vs importing from pipe tally. (APACHE, AERA)
904588 EPS to handle levels higher than Company
904589 Autoprint flag not being reset to 'N' after completing a template
904590 EPS Override flag not being saved
904591 Request for removal of message: Pay attention to this email: from outgoing e-mail in
EDM Publishing.
904845 Users entering more than 50 characters for a string name when saving Casings/
BHA's etc to a string library have the name truncated as the database field only sup-
ports 50 characters.
906531 OpenWells should use the well's grid convergence angle instead of the site conver-
gence angle, as is the practice in Compass. This affects scenarios in which the site
center is located far away from the well center.
906537 Improved memory usage in workflows where users associate rig operation in the
Event property dialog.
906539 Improved memory usage in workflows where users move away from General Tab
from Well Property dialog or exit the dialog.
906541 Performance enhancement - Implement indexes on rig to event association tables.
906550 Deployments which do not use the OpenWells Preview Pane would like to disable it
to reduce overall memory usage and to increase performance.
907171 OpenWells Survey Azimuth readings can disagree with Compass when Local Coor-
dinate System set to Site Center.
908082 Improved memory usage in workflows where rig associations are created from the
daily operations report.
908087 Improved performance when loading the preview pane.

5000.1.13 Page 192 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

908349 As an EDM administrator i need to be able to easily disable the pre-query/pre-load
feature of the report manager to reduce memory consumption in systems in which
report prequerying is not beneficial.
909187 OpenWells can hang when navigating between many wells while the preview pane it
turned on.
912078 As a rig supervisor i need to have the data validation on my operations entry screen
run whenever I check the "section complete" check box.

Release 5000.1.10

The following issues were fixed for the 5000.1.10 release of OpenWells software.

Defect No. Description

739526 Need a confirmation dialog to appear when a Wellbore row is deleted from the Side-
tracks table in Well Planning Report.
795618 Cannot specify Checkshot if depth above survey tie-in
815428 Default new Survey Station Type to Normal
839841 New Wellbore wizard: Wellbore No. picklist doesn't update additional fields
853426 Fishing Report displays current and pulled obstructions
853846 Request Formation in the Treatments Section
854230 DM_DAILYCOST audit fields are not populated intuitively
854613 Report Type list in the Create Report Type wizard is different depends where the wiz-
ard is launched from
855012 If you close and reopen Wellbore Obstructions window in Daily Operations Report,
you will see that the second Obstruction has disappeared from the screen.
855181 Request Rig On Loc. Date and Rig Off Loc. Date on the Create New Report screen
855233 Pumps: do not display in the pump No. order
855421 NPT/Equipment Failure Properties - NPT tab - Non Conf No. field does not show
Time in 24 hr format
855425 DO/Fluid Management/Fluid Handling/Fluid Discharges does not carry Description,
Fluid Description and Fluid Recovery tab does not carry over Fluid Type/Type to next
day. Fields not available to set up as carry over.
855700 Perforation condition is not changing to Neutral when the Hydrostatic Pressure and
the Est Res Pressure are equal.
855954 CEMENTING - Pumping Schedule - Fluid Pumped not updating properly
856197 EDM Publishing gets ORA-01843 error - invalid month in date.
856779 KOP Latitude and KOP Longitude can be incorrect in Wellbore Properties.

5000.1.13 Page 193 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

856904 SP#932-OpenWells-Unable to move Well Planning Rpt to another wellbore in same
Well.
856942 Changing units should not enable Apply and OK buttons in Rocket Rig Equipment
micro pages because of unnecessary SAM messages.
857142 In Rocket Start micro page, field MD KO should be mapped to CD_DEFINITIVE_-
SURVEY_HEADER.ko_md
857534 Exception on screen when exporting to Libraries folder on W7 from OpenWells
Report List (does not show a nice message like other places in OWELLS)
857717 Cementing DEF -> Stages Spread Sheet: Cut /Copy and paste does not paste the
Pressure Remaining, Plug Bumped and Float held. Also the Pumping Schedules are
not copied.
857913 Exception in Safety section around MMS Well Activity Form 133 report
858052 Change field length of DM_EVENT_T.event_objetive_2 from 30 to 255 Characters
858075 Locked stimulation report: can still modify field value if opened up using Unit Conver-
sion.
858079 Stimulation Report min and average calculations treat NULL and 0.0 inconsistently.
858081 Stimulation report: force calculation on the read only calculated field does not work.
858543 Survey with two Tie On points can be created in a parent wellbore
858667 EPS - Filters are not being applied.
858782 Copy/Moving a Well Planning report does not copy the Cement Program "Casing
Name" field.
859275 Parent Well of the Well Planning Report is not checked by default in the Offset Well
Selector Dialog
859720 Labels in Dev'n Summary Report, Section 1.2 are incorrect - OR#319/309
859722 Bit Ops - Time - Default to 23:59
860495 NEEDS TO BE FIXED IN ROCKET (ALREADY FIXED IN CLASSIC IN 5000.1.9.0)
:CLONE OF 731661 Need method to associate a Report(s) to a different rig to clear
up instances where a report is associated to the wrong rig
860599 Stimulation report: Fluid Clean Volume is not copied over.
860811 Well Planning Report - Directional Drilling spreadsheet are not saving the data rows
and when setup to load all sections throws an exception when saving the data.
861841 ENHANCEMENT REQUEST: OpenWells Coring report - DM_CORE_TIME table has
no sequence_no field and Output report doesn't sort by depth
862129 Need to edit all the summary reports config xml, add <report_type > Summary</
report_type>
862692 Need DM_PIPE_TALLY.replaced field

5000.1.13 Page 194 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

863010 Summary section of Well Planning - Planned vs Actual Summary Report not calcu-
lating
864594 Data Dictionary is not accessible in the EDM Admin utility WYSIWYG layouts
864600 Daily Workover Fluids cumulative calcs
864801 Change size of Comments Column in DM_MUDGAS table
864805 Thread type not importing into Casing Report
864878 Not running a casing or liner makes the Hole Section Details calculate incorrectly if
the Top Set field from the previous casing is greater than zero.
864983 Well Planning report copy: wellbore formation data is incorrectly copied.
864986 Well Planning report copy: definitive survey header is incorrectly copied.
865154 Have centralizers from Run Tally copy over to Jewelry section of casing report.
865346 OpenWells Planned vs Actual Summary Report does not show Days Down Time,
Days Lost Time, NPT Net Days.
865348 OpenWells DDR shows extra hole section records.
865662 OpenWells Rocket Find Well Dialog should have focus on Search field when
opened.
865680 Sections of the Well Planning Report cannot be edited when the scenario is not
there.
865842 Copying Well Planning Report results in CD_DEFINITIVE_SURVEY_HEADER,
CD_DEFINITIVE_SURVEY_STATION being updated with all rows from source to
target.
865845 Some fields are not importing into OpenWells from WITSML Stimulation Import file
provided by Halliburton
866943 Have some issues with the Classic Run Pipe Tally Data Entry Form.
867093 BHA Summary Report does not display the Wellbore
867649 CEMENTING: Fluid Pumped field under Pumping Schedule doesn't display until
saved
868243 When changing the Test Report's test method, clicking anywhere within the following
confirmation prompt is treated as selecting "OK"
868654 Admin Utility Customizer - Object names in field properties should be in sort order.
Also need to remove duplicate object names.
868794 Rocket - Plug section is broken in cementing report
868880 Exception while creating a new rig using the create new rig wizard
869195 Micro page Report Properties fields are all set to DM_REPORT_JOUR-
NAL.date_locked

5000.1.13 Page 195 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

869434 Include two new Pennsylvania Non Conventional share focused Regulatory reports
in OpenWells.
869781 Security Tokens not Respected
870008 Copy Well Planning report generates exception during inserting Def Survey Station.
870037 Hyper link in not correctly spelled in General.xml of EDM Admin
870271 Request that Drag and Drop option displays warning/confirmation dialog before copy
of data is implemented like other EDM Applications
870307 Copy Plan Formations button creates duplicate formations
870310 Rocket: Changing unit system from API to SI and vice versa in spreadsheets doesn't
work properly. Only the unit label changes but the value doesn't change
870514 EDM 5000.1.0.0 Install does not update DSImpServ.xml Class Path with INSTALL-
DIR on Windows 7 causing SAM not to start
870533 OpenWells classic and Rocket - F12 acts as though it will update read only and
locked date fields.
870682 Copying Well Planning Report results in CD_SURVEY_HEADER, CD_SUR-
VEY_STATION being updated with all rows from source to target.
870814 Copying locked Well Explorer names to clipboard deletes data
870953 WYSIWYG - Unable to customize WYSIWYG margins.
871227 Site Configuration import in EDM Administration Utility delete custom canvases
871228 OpenWells Rocket spreadsheet sorting issues
871454 Hole Section throwing exception error in Complex mico-page when "Annulus Details"
rows added, then click OK.
871509 BULKS: Quantity Start displays negative number on first days report
871517 OpenWells performance issues with large/long wells
871530 The 'Activity date/time' combo-box of Kick report dose not retain value after change
the selected value.
871704 Geodetic system and MD KO
871947 EPS is generating and emailing summary reports for each daily report that is pro-
cessed.
871979 Request Formation in the Treatments Section This is a clone for Multi version Import
and WITSML import work
872101 The changes of 'manifest' spreadsheet were saved, although the 'Material Transfer'
report was closed without saving
872105 Application is frozen after enter data in Bits section and close BHA Runs in micro
page
872511 Casing Output Report Schematic does not show cement on previous casings.

5000.1.13 Page 196 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

872721 Upgrading EDM db from R2003 to R5000 creates unit class definitions with >1 mea-
sure in custom unit systems
873197 "OK" button does not work when creating new entry form in Pipe Tally layout
873201 A row can be deleted after locking General micro page in Well Properties in Rocket
873208 Rig Properties window is editable although EDM.Explorer.Rig.edit and
EDM.Explorer.RigOperation.edit tokens are revoked
873209 Exception error displays when creating new Sidetrack/Wellbore in Well Planning
report
873210 The value in the Test Method drop down is changed when the user clicks anywhere
within the prompt (i.e. off the buttons, title bar, in the prompt text area, etc.)
873492 OpenWells installation and Import Site Config command are deleting existing cus-
tomized canvases
873564 Need to add new fields to test report and expose them to track load fluids left to
recover and satisfy greenhouse gas regulatory requirements
873565 Need to add calculations to test report to track load fluids left to recover and satisfy
greenhouse gas regulatory requirements
873565 Need to add calculations to Test Report to track load fluids left to recover and satisfy
greenhouse gas regulatory requirements
873569 Support for CD_ASSEMBLY_NOTE needs to be added to the WYSIWYG forms
(Wellbore Equipment and Casing)
873678 "Location Descriptions on Well Properties tab, can not add a new row.
874118 WYSIWYG Pressure Survey - Value of 'Gauge MD' and 'Gauge TVD' columns are
being changed after closing and re-open 'Pressure Survey' DEF report.
874309 Creating a new Wellbore, throwing java exception.
874453 OW Classic - Two DEF's can be opened at the same time
874508 The Picks Editor and Detail links don't work at the second time when user try to open
them again.
875186 The Update audit fields (update user id, update app id and update date) are not pop-
ulated immediately in a cost record id Daily Operation DEF.
875417 EDM Publishing (EPS) will not generate schematics for iWellFile.
875530 New Stimulation WYSIWIG delete all the treatment data after adding steps data
875697 Daily Operation - Lessons - Event no. remains blank and never get populated
875804 Cementing WYSIWIG - Null label in Stages section. Also cutoff units in fluid details
875838 Frac Focus output report shows incorrect Report Name on Report Title
876107 One survey is not showing up in Daily Operation

5000.1.13 Page 197 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

876137 Well Properties XML/Create Well XML do not change labels when Offshore and Sub-
sea are checked.
876137 Well Properties XML/Create Well XML do not change labels when Offshore and Sub-
sea are checked.
876587 Associating a Rig to the Event is taking over a minute to process
876903 Cannot save Cementing Report in Rocket. Throws exception upon clicking the save
button.
877498 Value of 'Bot conn type' field is missing on 'Umbilical Details' window after pasting
and apply a row on 'Umbilical' table
877600 Wrong Location Slot Template field attribute used in Create Well page in Rocket
877757 EventAssocRigOp.xml does not display the correct tables for assigning fields in the
spreadsheet UI.
877804 Cement.xml/CementLayout.xml do not display the correct tables for assigning fields
in the spreadsheet UI.
878823 The value is not getting updated in the fields MD BH and TVD BH of End Operation
MP if user make changes in the same fields of Wellbore Properties -- Depth MP.
878825 No unit displays against MD BH field of End Operation MP
879432 Fluid section - Slurry Test Details link is broken in Cementing WYSIWIG and MP
880404 Frac Report (printed report) errors

Release 5000.1.9

The following issues were fixed in the 5000.1.9 release.

Defect No. Description

747296 Field for "net pay thickness"

794996 Created a Completion string in the Well Planning form for our Limestone 25 well (In
EPW_CAN_FOOTHILLS WDU). Imported the joints into the Assembly Components
spreadsheet as follows using spreadsheet import: Get Enclosed error.

806050 DEFECT: OpenWells 2003.16.1.17 Build 8055, Cementing Reports are Not Display-
ing Correct Casing Details

809230 Copying Well Planning report also copies all the designs (actual & prototype)

812423 Don't see SAM icon on the wellbore in OpenWells when logged into the same net-
work user and on the same Citrix Server. Documentation indicates it should and that
is not correct. Needs changed.

820655 Calculation not refreshing on Cost Estimate and AFE entry form.

5000.1.13 Page 198 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

821299 Delete survey is available to the user when the survey is locked by another user
(SAM).

822173 NPT Summary Problem - Wrong total hours - V.5000.1.3.0.

823950 Volume pumped in Stimulation Report does not recalculate when schedules are
added in Stages.

824045 Hole size displaying incorrectly.

832110 When the From Survey option is selected in the Survey Header Properties, then Ver.
Sect. should continue from the selected survey.

832111 New Well Wizard - default Wellhead Elevation field to null.

832115 Expose CD_WELL fields is_multilateral and is_lake_drilled and lake_height to lay-
out manager.

832117 Expose additional DM_WELLBORE_OBSTRUCTION fields to the layout for Well-

bore properties, Obstructions tab.

832121 All Wizards - fields should use status colors from data dictionary.

832124 Rig Operations Properties - expose Notes field to the layout.

832125 Pits Summary Properties, Audit tab - expose the Notes field to the layout.

832126 Pump Summary Properties, Audit tab - expose Notes field to the layout.

832128 Shakers Summary Properties, Audit tab - expose Notes field to the layout.

832129 Centrifuge Summary Properties - expose Notes field to the layout.

832130 Hydrocyclone Summary Properties, Audit tab - expose the Notes field to the layout.

832131 Motor Summary Properties, Audit tab - expose Notes field to the layout.

832132 Boiler Summary, Audit tab - expose Notes field to the layout.

832134 BOP Summary Properties, Audit tab - expose Notes field to the layout.

832135 Degasser Summary Properties, Audit tab - expose Notes field to the layout.

832137 Add new fields to Well Planning Report, Cement Program.

832138 Casing Report, General section - add new field activity_phase.

832139 Cementing Report, General section - add a new field activity_phase.

832141 Survey Properties, Audit tab - expose Notes field to the layout.

832650 Support Craft / Logistic Workflow needs revamped.

835350 NPD CDRS: Bit elements in NPD cannot be mapped to CD_BHA_COMP_BIT and
only to CD_ASSEMBLY_COMP.

836019 Plan View graph in Deviation Summary output reports are incorrect.

5000.1.13 Page 199 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

836489 Spell Check reverts to incorrect spelling.

836839 OpenWells operations summary chart shows wrong contractor name.

836958 Schematics on custom output report(s) are incomplete, do not show casing or
cement from last day.

836979 CLONE OF DE 835756 FOR FIX IN 5000.1.7.1: OpenWells Users receiving large
Java Exception Dialogues when leaving app open.

837191 Slotted Pipe Creates Wellbore Opening with 0 MD Top and Base.

837228 CLONE OF 828877 FOR FIX IN 5000.1.7.1 Improvements in OpenWells with

respect to SAM messages.

837751 Set rules for order of processing flags.

837930 Stimulation jobs get duplicated when a Well Planning report is copied to the same
well/event.

838136 Adding the Event to the Partner Email subject.

838302 EPS processing reports that do not meet the template criteria.

838313 Request that the Summation button in Daily Costs also show AFE information.

838769 Well Planning report - Side Tracks can still be editable with red SAM. Also an excep-
tion is thrown in the log file.

838828 D/E - EPS is creating bogus folder names when Report Date is selected.

838862 Some Daily micropages are read only when the Daily Operations.edit token is
granted.

839038 Using/running a liner makes the Hole Section Details calculate incorrectly.

839057 When creating a Job using the New Job Wizard, the Job Code is not auto-popu-
lated, only the Job Type.

839106 OpenWells Casing report Datum setting.

839106 OpenWells Casing report Datum setting.

839248 Unable to scroll menu items in Interactive Well Site (Rocket) mode.

839249 Request first previous next last VCR scroll buttons for navigation ROCKET mode.

839251 ROCKET Add symbols to Select Date calendar to show which dates have reports.

839297 Cannot create a Well Explorer Filter when there is a picklist applied to certain fields.

839512 No scroll bar or sizing capabilities to change the size of Rocket on the screen.

840007 Request new Lessons Learned Report under Project Level.

840368 ENHANCEMENT: OpenWells - CASING REPORT - TVD_Landed to become an

automatically calculated field.

5000.1.13 Page 200 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

840640 OpenWells NPD Module change to change "Code" to "code" in NamingSystem.

840818 Daily Operations Data input Form > Anchor Operations.

841271 Remarks Section does not appear in Daily Geological Output Report.

841663 Request to have the Daily Operations > Support Craft Data Entry Form perform like
the new "Personnel" section.

842188 Rows in CD_SURVEY_PROGRAM reference a survey (survey_header_id) that

does not exist in CD_SURVEY_HEADER.

842355 Add new fields to Well Planning Report, Cement Program.

842494 Visualizing attached files in the Drillstring section (Daily Operations Report).

842913 Show Wellbore name and no in the well information section of all the OpenWells out-
put report (Mainly the report journal level reports). Also change the section title to
Well / Wellbore Information.

843020 Default Stimulation output report has many issues.

843283 OpenWells (Access is denied) - FileNotFound Exception dialog reported when you
try to open attached document that is already open.

843466 Edit Template button launches Edit Template window with blank area and no
options.

843663 Wellbore Properties Kickoff TVD calculates to be greater than Kickoff MD when Sur-
vey Tie On TVD is greater than Kickoff MD.

843824 Copy From Library causes incorrect filtering in Cementing Report's Casing Details
Assembly picklist.

843863 OpenWells Rocket Interactive Well Site locking up on Time Summary - Group field

844418 Summary Report cannot be delivered to the partners.

844625 Component section in Casing detail micro page, button "Save String to library"
appear to fail to save string.

844885 WYSIWYG Printing on A4 and Letter Size: borders get lost and there are some
problems with splitting over multiple pages.

845445 New blank rows are added in Personnel section with Oracle database.

845446 Closing the form with Close button does not save the updated Number of People.

845447 Exceptions thrown and Person's not added if People on Site tab is hidden.

846113 Rocket Survey MP - Cancel button still create a Survey unlike in classic

846312 Wellbore Equipment report defaults MD and MD Landed equal datum elevation

846771 OpenWells - OpenWells Site Location Type Not Saving

847137 EDT Security Rights Output Report enhancements around

5000.1.13 Page 201 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

847526 Exception when a new Facility is created

847699 Hole Sections do not send SAM messages when user edits values in the detail
panel.

848059 Double-click on Work Strings in Schematics Window brings Work Strings micropage
for the wrong date

848311 Well Head report does not show "Total Component Cost"

848312 Wellbore Equipment Reports does not show Ground Elevation, Hole MD and Hole
TVD

848424 New Fields for Daily Report - Safety Section (Enhancement Request)

848443 BHA Runs failed to updated "Length" calculated field for DP after a copy from previ-
ous without reloading the form.

848800 Hole Section and Leak Off Test section can get out of sync.

848862 Job Type, Job Desc, Assembly, MD Toc, Tubing/Casing Size and Hole Size don't get
displayed in the Planned section of the Plan Vs Actual Cementing output report

849370 Increase size of field MD_Site_Attr_Dictionary.custom_co_value

849935 Change Field Length in OpenWells 2003.21 not long enough for client data - Field
Name budget_type need to be increased to 13 from 8.

850098 WellPlanning DEF: MD Top value entered in Casing section disappears after
reopening the DEF

850100 Select Planned Casing option in Hole Sections not showing all Planned Casing's
and also throws an Unparsable exception

850215 Difficult to read CDRS reports that have quote and carriage return characters

851668 Edited data in Cementing micropage is lost once the Cementing micropage is saved,
closed and reopened

852041 Data Entry Forms and WYSIWYG data disappears when you create the next day's
report as you click Finish on the Create New Report Wizard

852160 Report manager hangs with custom reports that has no table of contents

852192 WellSite Construction tab's Water Well Test spread sheet rows disappear after sav-
ing, closing and reopening Construction DEF

852192 WellSite Construction tab's Water Well Test spread sheet rows disappear after sav-
ing, closing and reopening Construction DEF

852659 Footage Cum. on Bit Operation does not always recalculate.

852687 Well Properties AutoSync Tab does not display correct AutoSync status

852997 Request that the Deviation Summary Output Report also include Survey information
and graphs from the planned surveys in the Well Planning Report

5000.1.13 Page 202 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

853382 OPENWELLS: Move Report Wizard produces errors when moving reports and
exception errors received causing application to crash

853750 OPENWELLS: UPGRADE: Performance Issues in Umbilicals Section of Wellbore

Equipment Form

855031 Debugging Crystal Reports: Loss of functionality of Report Manager Standalone Util-
ity. Would like similar tool and documentation upgraded.

859357 Validation message issued when editing Arrival Time on Support Craft in the Open-
Wells Classic DEF

859392 Pipe Tally - Importing Off Load into Run Tally doesn't refresh properly

Work Around for DE 857142

The following procedure can be used to alleviate any concerns related to DE
857142 - MD Kick Off is mapped to CD_WELLBORE.ko_md in the Start micro
page and to CD_DEFINITIVE_SURVEY_HEADER.ko_md in the Wellbore
Properties page.

1. From the EDM Administration utility navigate to the EDM Application

Settings > Drilling > OpenWells > Layout Manager > WYSIWYG >
Custom > Recordings folder.

2. Select the XML for the Start Operations page.

3. If using the Landmark shipped XML:

a. Right-click on the Recordings folder and select Add New WYSIWYG

File... from the menu that appears.

b. Navigate to the <EDT install directory>\EDM\Site Configuration

Files\Wysiwyg\Landmark\Recordings folder and select the
StartDrilling.XML file.

c. Click the Select button.

The WYSIWYG layout for the StartDrilling.xml is displayed in the EDM

Administration Utility.

4. Double-click on the Field portion of the MD KO field. The Field Properties

dialog appears.

5. For the Object, select CD_DEFINITIVE_SURVEY_HEADER from the drop

down picklist.

5000.1.13 Page 203 of 283 July 2014

 OpenWells Software Release Notes

6. For the Attribute, select ko.md from the drop down picklist.

7. Click OK to save changes and close the dialog.

8. Click the Save button in the application toolbar to save the XML layout.

Before a customized layout will appear in the OpenWells application, it must first
be assigned to a Well Site Canvas and the Well Site Canvas must be assigned to
an Event Type. These items are covered in the EDM Administration Utility online
help Custom Well Site Canvases topic.

Release 5000.1.8

There were no OpenWells issues fixed for this release.

Release 5000.1.7

The following issues were fixed for the 5000.1.7 release of OpenWells software.

Defect No. Description

172804 Implement BHA History as per DIMS
619699 Make the Hole Sections editor available somewhere outside of the Daily Ops DEF
622729 Need additional Tubing Pressure field for Flowing Test Sheet
623206 Need range of depths for peak gas.
623207 Please add Rate of Penetration to the Peak Gas tab of Daily Geology Report.
624555 BHA Operations records not always deleted when they are tied to a BHA and the
BHA is deleted.
625259 Need Volume of Oil Stored field in DST
631697 Enhancement needed to record fuel usage and run time of all motors.
631968 "Time Summary", "Total Time" should be dependent on "Group Activity Filter"
698566 Only one user can edit a report at one time
699704 Need ability to enter a DISTINCT clause in picklist filter
699899 Provide 'Days since shut in' field displayed in Jobs List
700561 Need a Remarks section in Event and Wellbore Properties
700697 Extend EPS to only output 'approved' reports
705566 Add "Cost Editor" similar to existing Survey Editor to display all costs entered for
event and allow editing without having to go back through all reports

5000.1.13 Page 204 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

717864 New Contractor field required in Casing Form
720414 703232 continuation: Allow to fill Work Strings and operations information from Stim-
ulation, coring and, logging reports.
721387 Request Min and Max fields for WOB, RPM, and RPM Rotating.
721800 Require new fields in Test Form
722180 Drillstrings planned in Profile Should be available in OpenWells in Well Planning
report and from there available to be imported as actuals.
726285 Wb Equip - Completion Notes support required
728203 Need sorting on Primary Work Unit internal picklist. NOTE: User can now provide
their own sorting on user picklists.
730057 Read Only User can still perform Unlock All or Lock All on reports.
730416 Dates should have a 'unit' showing the date format
730614 Customer would like an NPT logon to be created. This logon would grant RW access
to the NPT sections of reports and limit all other sections of the report as Read Only.
732631 EPS needs to handle Partnership Start & End Dates
739289 Coring Reference Log field not exposed in Coring form
743453 Cumulative Cost Issue when creating 2 report for One Day
745102 Request that the Event End Date be populated when the Final Report checkbox is
selected. Note: controlled by System Setting
748482 EPS generates error and does not create PDF's
750224 Publishing takes too much time to create .pdf report files
750359 CEMENT - Stage pumping schedule, auto-create first row when stage created.
750445 Need 'Flip Assembly' feature to resolve issue where user entering components in
wrong order
750510 Drillstrings - Require 'Show All' feature (toggle) to list all BHA runs for the Event.
Should include BHA Runs in parent Wellbores. Enables 'hidden; BHAs to be edited/
corrected.
750634 Have Drillstrings section auto populate the Progress in Bit Ops.
754529 Customizing OpenWells Test data entry form layout results in fields disappearing in
form
755089 Internal picklists require better support for Design Phase values
755488 Assembly in Located Inside picklist in Casing Report doesn't appear in sidetrack
757370 Accessing EPS Interactive takes hours for the Interactive tab to fully list all DEF's in a
10,000 Well database
759691 No individual security on Pick tables

5000.1.13 Page 205 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

760179 Additional fields required for Material Transfer
760602 Unit system can be edited even with "EDIT" application default token set to revoked
763605 The tabbing order of the arrival/ departure checklist of the New Job wizard is not intu-
itive. It would be better if it went to add row, down the arrival, then add row, down
departure list as opposed to across the way.
763757 Request for Enhancement to Assigning Partners into the Wellbore and Event Prop-
erties
764932 Expose the letter code field in the Offload Pipe Tally spreadsheet.
769756 Enhancement request for OpenWells Input data to be saved automatically to prevent
from losing data in case of power off. Note: Controlled by a System Setting. See
Online Help
770759 Event Transition: When Transitioning Events using Copy Records from Event Tool, it
is not possible to carry over costs.
773825 OpenWells needs to filter actuals vs planned and prototypes in the Copy from Previ-
ous/Planned Drillstrings dialog box.
785214 The "Create a new rig" option after creating a contractor in the contractor tab does
not check the EDM.Explorer.Rig.add security token.
785215 The "Create a new rig operation" option after creating a contractor and a rig in the
contractor tab does not check the EDM.Explorer.RigOperation.add security token.
795342 Users have no ability to control the sorting of Daily Costs. Even if the up/down
arrows are used, the sequence is not carried over to the next day.
795722 Clients cannot configure displayed columns in internally defined picklists - for exam-
ple Umbilicals tab hard to identify components -
796627 Missing Summary Property pages for some Rig Equipment
798029 Can not generate Wellbore Schematic and BHA Schematic in a single Report
798858 BHAs out of order on OpenWells Daily Output Report when Options Screen is
removed.
799036 There is an Exception pops up when you add more than 300 rows in Cost Estimate
and AFE report.
799155 Add CD_DEFINITIVE_SURVEY_HEADER to WYZWIG
799487 Deleting pump does not delete pump op in the database.
799507 If no casing section is added to the Hole Section Details spreadsheet, Length equal
Depth, should be MD base - MD Top.
799914 Casing Output Report - Not showing Job Activity section.
799917 Wellhead Output report - missing "total component cost"
799941 General Work Output report - doesn't show Work Operation "duration" field.

5000.1.13 Page 206 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

799958 Daily Geology Output report - No Value on Daily Cost and Cumulative Total field. The
DEF shows a value on these calculated fields.
800043 Cementing Output report - doesn't have Workstring and Job activity
800114 Daily Drilling Output Report - No Fluid Management Content.
800239 Missing alternate currencies against 4 unit classes
800945 Cementing Output Report Fluid Pumped Out of Order - sort by sequence_no
801170 Association between a custom Data Entry Forms and WYSIWYG to show is lost after
upgrade.
801418 Proposed Set MD in Drillers Running Pipe Tally Report
801831 PUMP OPERATIONS - The Pump Efficiency is not defaulting from Pump definition in
Rig tab
801885 Clone of 731662 Would like to have more Rig Operation fields in Associate Rig
Operation wizard to avoid navigation to Contractor tab
802006 Additional fields needed to capture various information in CD_WELL. Need to add
them to the Well Property dialog box too.
802110 Clone of Defect 767874 - Filter the list of contractors/rigs available in the Associate
Rig Wizard off of event by start date and end date
802370 Clone of 750474 - Drillstrings - Show a warning listing Bit and BHA Ops associated
prior to deleting the BHA Run.
802609 Clone of defect 755091 - Well Explorer does not refresh to show found Search item
802622 Clone of 801881: Sibling records not deleted when section type is changed
802668 Add field: Excess Lime to the Water Based Mud Properties tab in the Fluids Section
of the Daily Operations Data Entry Form and Daily Operations Output Report.
802774 Clone of 802003 Application crashing when the Military Grid Reference System is
used
802800 CLONE of 735476 Request that User Audit information be added in the Daily Cost
Spreadsheet.
802915 CLONE of 801379 Bit Summary and BHA Summary output reports do not show all
bit runs/bha runs if there are no bit/bha ops under them.
802927 CLONE of 750615 Copy To/Move To command should automatically navigate to the
node above the item you are trying to copy.
802950 CLONE of 796360 Confusion for users on what date format is required for different
fields
802965 CLONE of 750638 - Drillstrings - Convoluted workflow required when sidetracking so
that sidetrack BHA can be seen in sidetrack wellbore
803202 In the Daily WYSIWYG's BHA section, changing a Section Type of a component and
then canceling out of the Catalog Selector still change the data on the Assembly row.

5000.1.13 Page 207 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

803367 CLONE of 799500 Eff. Hole Dia should be used to calculate Linear Capacity for
Open Hole.
803375 Clone of 802379 - Deleting a BIT component only deletes the Bit Operations for the
current Daily
803376 Clone of 802811 Rig Operation Summary does not check if rig operation is in use
before deletion
803378 Clone of 750476 - Survey Station MD is being auto populated. Someone thought this
would be a good idea, but the users find it inconvenient.
803503 How can we get the formation tops report?
803735 Clone of 755089 - Internal picklists require better support for Design Phase values
803838 Cost Est AFE Output Report - Est Base Currency Not Calculated Correctly
803843 CLONE of 749709 Changing Rig On Location date for associated Rig Operation
results in Daily forms not showing Rig in the Data Entry Form Window Title Bar; <NO
RIG> shown instead.
804310 CLONE of 804087 TVD is not showing on the DDR output report.
804320 No TVD calculated when no surveys can be found. This is related to D/E 769197.
This works well when surveys are entered, but not well between surveys. Need a
compromise on the behavior
804375 CLONE of 750467 Deleting Rig Op-Event link data is impossible, OpenWells states
you can't do it as reports already exist.
804380 CLONE OF 731661 Need method to associate a Report(s) to a different rig to clear
up instances where a report is associated to the wrong rig
804544 CLONE OF 803198 -When a Assembly Component's Section Type is change, the
associated data with the previous section are deleted immediately (not able to
recover).
804624 CLONE of 804496 Datum is not refreshing after import.
804626 CLONE of 804092 Table of Contents and Cover page options should be disabled by
default
804645 CLONE OF 803838 Cost Est AFE Output Report - Est Base Currency Not Calcu-
lated Correctly
804908 Mud Product Transaction calculated values can be off if there are duplicated dai-
ly_id's
804908 Mud Product Transaction calculated values can be off if there are duplicated dai-
ly_id's
804971 CLONE OF 804647 - Associate Rig Operation to Event should force the user to
close off previous rig ops for same rig
805418 User wants to add Safety - Incidents spreadsheet in WYSIWYG that is in Form View
805421 Please add spreadsheet for Notifications in WYSIWYG

5000.1.13 Page 208 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

805450 Proper fix for the DE801285 - ArrayIndexBoundsException and Could Not Save
Form.
805502 Old Rental Summary Report
805557 Clone for Rocket - "Could not save the form" error relating to Bulks and Mud Inven-
tory after using VCR Next and Previous buttons
805559 LOT Summary Report in OpenWells giving wrong values on base axis.
805618 Clone (766760) to Test in Rocket - Unable to select no assembly (blank) in Cement-
ing report
805829 D/E Report times out after 15 minutes
805974 User can edit Read Only Daily Operations DEF by double clicking in Hole Section
fields
806032 Perforation - Intervals - MD Top and MD Base are not showing up unless CCL@ and
CCL-TS are populated
806318 Bit Summary Report Heading is listing all wellbores for the well when it should only
show wellbores for the selected event.
806546 Final Pipe Tally Report - "Attach Section" functionality is incorrect and affects the
Tally No in the output report
806641 Event Property-When adding rig op, then default time on Rig on Location is 00:00
806676 Creating Geology Report Creates Orphan CD_FLUID_T record
806719 BHA Deletion is not refreshed when no is selected on Save Changes Window.
806735 NPT Summary Properties / NPT Equipment Failure Properties- Format issue when
Contractor Section is hidden.
806856 REQUEST: Add new unit to Class 171 aka "Concentration (Chlorides)"
807015 MMS Well Activity Form 133 Output Report - request that Section 13 be sorted by
date.
807288 Datums may show default datum checked when table cd_datum.is_default = 'N'
807409 Casing Reports - Incorrect Hole Size appearing
807464 EDM Admin - Property dialog boxs changes are not being saved/respected
808036 ENHANCEMENT: OpenWells 2003.16.1.17 - Selecting casing assemblies whilst
sidetracking
808379 Pipe Tally Report shows only 110 records instead of 136
808395 Add more audit field to daily cost spreadsheet
808545 In Drilling pipe tally report the cumulative length calculate the length of first joint
although it is flagged out.
808802 Not able to enter CD_CONTRACTOR information on wysiwyg
808990 Enhancement: increase event_type on the MD_SITE_EVENT_TYPE to 40 character

5000.1.13 Page 209 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

809043 Recorder information in Drill Stem Test report is not being shown properly.
809291 Increase length of Age Code on Company Properties for Strat Units
809638 Wysiwyg needs to accommodate fann data readings
809874 PK_STATE should be the default picklist for State/Prov in Well and Site properties
810045 Fluid Hauling Data Entry Form does not keep Fluid Source and/or Fluid Destination
name if add a new line in form
810354 The total AFE shows up correct value whereas when you take the print preview of
Operations Summary CharT, the total AFE mentioned is way much more than the
correct value.
810655 Removing Surveys from Well Designer/Trajectory tab once added (no Compass).
811700 The total AFE shows up correct value whereas when you take the print preview of
Operations Summary CharT, the total AFE mentioned is way much more than the
correct value.
811703 Pipe Tally Report shows only 110 records instead of 136
811800 CLONE OF 808551 Fluid Management - Fluid Disposal. Request to be added to
WYSIWYG Form
811801 CLONE OF 811732 Add DM_CUTTINGS, DM_SPILLS, DM_FLUID_DISPOSAL,
and DM_FLUID_DISCHARGE to Wysiwyg
812063 Require the ability for PROFILE to be able to display Stimulations across multiple
Events
812085 Cement rendering issue due to bottom depth comparison
812940 System Settings are not included in a Configuration Transfer export
813325 Clone of 813325 If Rig op has been removed from the associated rig (event proper-
ties) - the rig key should be deleted from ALL reports not just DEF
813353 Text area name are not customized for Partner Contacts Editor
813595 Site Properties defect. Notes Field (cd_site.Remarks) is not visible in EDMAdmin
814134 Well Obstruction Component Ordering not working
814134 Well Obstruction Component Ordering not working
814620 Obtain NPT hours as a percentage of the event total hours in a single report.
814773 Error in Create New Report wizard if no tokens granted
814958 Deleting company data in POB causes orphan data without using the "Clear Com-
pany Daily Information" button. POB general workflow is not intuitive to uses.
815060 OpenWells AFEvs Actual Report - Currency field missing. Our ref #121
815108 Add CO2 presence CHECK BOX for a Well
815397 Extend Associated Data Viewer so that it shows Report Level Attachments at Event
Level

5000.1.13 Page 210 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

815401 Allow internal picklists to have Sort and Filter Clause
815914 DO - Workstrings - no place to enter parameters for Progress Summary
815922 Copying Daily Operations report also copies associated rig
816165 Need BHA Operations fields for off and on bottom circulation pressure
817090 Wellbore equipment report blank fields
817594 Need UI Drill days in DM_RIG_OPERATION
818145 The last page of report has no page number.
818205 Profile draws Packer outside wellbore equipment string, when it should be located
inside
818615 PROFILE 2003.16.1.23 We have issues with the Stimulations data entered against a
specific event that appears to be related to dates of event yet all stim data is within
the start end date of specific event
818829 Enhancement - Additional fields in Time Summary
818841 PROFILE issue rendering Cement around Slotted Liner Completion in Multi-Lateral
Well displayed incorrect on interactive schematic
818843 LOT Summary Output Report - Test Data does not grow correctly to the next page.
819195 Please provide "Auto Catalog Select" On/Off Option in OW for the whole company as
well as per user basis
819347 PCP Report DEF > General > Landed MD depth does not use Datum
819387 Wellbore No. field cannot be made read only - Wellplanning Report/Hole Sections
OR 251
819605 Using the Create Wellbore Wizard does not populate Wellbore API like if use File -
New -Wellbore or by right clicking on a Well to create new Wellbore
819794 OpenWells - Progressing Cavity Pump Report - Rod Guides indication is not present
on R5000 OP report. Shell OR#186
819799 OpenWells-Today's Wells Screen - How to configure the transfer button.
819812 OpenWells 5000.1.4: MD sort order messed up in BHA section (output report)
819825 Pumping Schedule on Cementing output report not in correct order as entered on
Data Entry Form
820149 Custom Water Based Mud tab in fluids section of Daily input form does not change
after applying customization
821389 Need spare fields in DM_ACTIVITY
821907 Client wants to add a field on a Data Entry Form that calculates a value based on
other fields.
821988 Dm_Safety.remarks - Enhancement request to increase Dm_Safety.remarks test
field from 225 to 500.

5000.1.13 Page 211 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

822218 RELATED TO 750445: Profile: Need 'Flip Assembly' feature to resolve issue where
user entering components in wrong order
822265 Remove WYSIWIG Button from DEF when WYSIWIG disabled
822530 The schematic in the Cementing output report is not showing the hole section, cas-
ing, cement, etc. entered on the same day as the Cement Report Date.
823723 CDRS report generation unable to generate Norwegian characters correctly in
2003.16.1.25.
824868 UPGRADE: "Casing Name" picklist in OpenWells Cement Program Details to
include Liners from StressCheck design.
825096 Changing Active Unit System in Profile changes Datum stored in database
825335 User wants NPT Summary report to have a column for duration type ET = Equipment
Failure and a column for other NPT types e.g ODHP
825412 Wellbore schematic does not appear if datum missing - User wants a warning mes-
sage added to crystal report to let user know datum is missing like in Profile
826507 Create new from copy button should automatically put in new BHA Date and Time In
from the previous BHA Date and Time Out.
826898 Request Northing and Easting on Anchor Position in Daily Anchor Operations.
826901 Copy plan formations from Compass design to OpenWells, Wellbore Properties, For-
mations tab
828195 Duplicate daily_id from different wells cause error in cum hrs and cum footage
828358 Request wellbore name, corrections to graph, headings on the cover page, and Rig
Name and No. are not printing on the LOT ( Leak Off Test Summary ) Output Report.
828577 DEFECT: PROFILE: Crash Opening Designs - application crashes with no error
828586 PROFILE SCHEMATIC: schematic draw incorrect - conflict caused by cement and
casing shown incorrect
829718 OPENWELLS > DATA ENTRY FORMS > PERFORATION REPORT > Intervals
spreadsheet is not remembering data entry order. > Index should be created on this
table to retain order that this data is entered on spreadsheet
829725 OPENWELLS - OUTPUT REPORT - PERFORMATION - not sorting the data ade-
quately - should sort intervals by MD Top
830264 Parent wellbore blanking in Compass after OpenWells save
830468 SQL Server 64 bit Install's keep installing every time I run EDT 5000.1.7 install on top
of EDT 5000.1.5
830469 EDT 5000.1.5+ upgrades unpack Historian files to Temp folder irrespective of
whether user wants to install Historian or not
831061 CD_ASSEMBLY.remarks field exposed for ACTUAL designs
831288 Copying Cost Records from another well results in incorrect cost_date.

5000.1.13 Page 212 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

831399 Daily Data Entry Form Cost fields do not always recalculate and/or refresh from Mud
Inventory updates.
831461 Multiple Reports with the same date from the same well aren't being sent out
832097 A valid time may not be accepted when entering a time on a Survey.
832112 New Wellbore Wizard - place Wellbore No. field before Well Legal Name and Well-
bore Common Name fields
832113 New Event Wizard - Add DM_EVENT.event_type to bottom of New Event Informa-
tion area
832120 New Rig Operation Wizard - default Contractor and Rig Name picklists to null.
832122 Extend Event Reporting Standard to Jobs
832136 NPT Properties, Equipment Failure tab - make Failure MD field available on this tab
(as well as General tab)
832287 Daily Operation > Drillstring (BHA/Bits) > Components > BHA length needs to
include Drill Pipe and Drill Collar if the Drill Pipe is within the BHA
832288 Daily Operations Report POB needs to be redesigned.
832350 Graphical Well Summary Report
832643 MUD INVENTORY: Add two columns Vendor & Function
832783 Cannot delete Perfs out of the Wellbore Openings tab if they were created in a Perfo-
ration Data Entry Form
832846 Display issue with Well Planning Report - number of rows shown in Planned Opera-
tions
832847 Need cum totals on Wellplanning Report for Hole Plan time and cost numbers
832875 Clone of 830692 to track fix in Rocket: Rows lost from DM_WELL_PLAN_WELL-
BORE_LINK during upgrade from 2003.16.1 to 5000.1.5.2
833091 select a casing from parent wellbore in Cementing Report.
833189 BHA's are not sorted correctly in WellPlanning Report - Drillstring Program.
833881 CLONE OF 805186 TO VERIFIY IN 5000.1.7 DEFECT: Related to DE#803185
Compass 2003.16.1.17 Build 68, causing corruption of OpenWells 'Build
2003.16.1.17.8055 'entered Casing reports
834768 Wellhead report - API Temp Rating picklist display wrong characters for tempera-
tures (-50F/-46C to 180F/ 82C)

Release 5000.1.6

There were no OpenWells issues fixed for this release.

5000.1.13 Page 213 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.5

The following issues were fixed for the 5000.1.5 release of OpenWells software.

Defect No. Description

741059 Modifications to the Perforations Report do not get reflected in the Wellbore Open-
ings tab

812106 Clone of 766760: Unable to select no assembly (blank) in Cementing report

797133 OpenWells incorrectly calculating well surface location when well location is defined
by reference to slot.

805541 Require component "description" field to be available in all catalog types.

814332 Navigating between Daily Ops reports loses focus on the active section

798340 ENHANCEMENT - add AFE Number and Description to Event Operation Summary
Report

812240 wrong calculation of total pages in Material Transfer Report

812243 There is no option to let user hide cover page and index page when user previewing
the Daily Well Operations Report

812246 Report content error-Leak Off Test Summary Report

812296 EPS fails to generate reports filtered by reporting standard on the next day resulting
in lost reports

812808/ After installing the software, log into OpenWells as a standard user; application
812810 throws error ...file path is not a directory...\Queries\Drilling... or ...file path is not a
directory...\Queries\Rushmore.... This only occurs on the FIRST launch of Open-
Wells after installation (and then only if the user logs in as a standard useri.e., not
Administrator).
WORKAROUND: After installation, log into OpenWells as Administrator one time. All
subsequent launches of OpenWells will now work when user is logged in as a stan-
dard user.

813089 5000.1.2 AFE vs Actual report: A loop was evaluated more than the maximum num-
ber

815232 Cost vs. Days stops "growing" at a certain point for no reason

811389 OpenWells R5000 Memory Usage Performance Problems

813407 Clone If Rig op has been removed from the associated rig (event properties) - the rig
key should be deleted from ALL reports not just DEF

814542 CITRIX - User can login to OpenWells w/o username and password or Win Auth

815840 Finish button won't activate unless selecting a different event when Dragging and
Dropping Report from one event on one well to another Event on a different Well

816812 Drillstrings - Create New From Copy doesn't show strings from other wells

814764 Report Cover Page logic not working

5000.1.13 Page 214 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

815037 Time Distribution Report displaying incorrect values

816495 Unable to add a survey in OpenWells in certain situations.

Release 5000.1.4

The following issues were either addressed or have workarounds for the 5000.1.4
release

Defect No. Description

801881 Sibling records not deleted when section type is changed
802003 Application crashing when the Military Grid Reference System is used
801741 AFE v Actual crashes with supplement AFE
802379 Deleting a BIT component only deletes the Bit Operations for the current Daily
796360 Confusion for users on what date format is required for different fields
801379 Bit Summary and BHA Summary output reports do not show all bit runs/bha runs if
there are no bit/bha ops under them.
799500 Eff. Hole Dia should be used to calculate Linear Capacity for Open Hole.
804091 No TVD calculated when no surveys can be found. This is related to D/E 769197.
This works well when surveys are entered, but not well between surveys. Need a
compromise on the behavior. System Setting required. See documentation.
804087 TVD is not showing on the DDR output report.
804496 Datum is not refreshing after import.
804092 Table of Contents and Cover page options should be disabled by default
802811 Rig Operation Summary does not check if rig operation is in use before deletion
749709 Changing Rig On Location date for associated Rig Operation results in Daily forms
not showing Rig in the Data Entry Form Window Title Bar; <NO RIG> shown instead.
750467 Deleting Rig Op/Event link data is impossible, OpenWells states you can't do it as
reports already exist.
735476 Request that User Audit information be added in the Daily Cost Spreadsheet.
750476 Survey Station MD is being auto populated. Someone thought this would be a good
idea, but the users find it inconvenient.
750474 Drillstrings - Show a warning listing Bit and BHA Ops associated prior to deleting the
BHA Run.
731661 Need method to associate a Report(s) to a different rig to clear up instances where a
report is associated to the wrong rig
714409 Copy Existing String should default to current Well and Wellbore

5000.1.13 Page 215 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

732834 Date/Time fields should have masking format so that the user only has to type the
numbers.
731662 Would like to have more Rig Operation fields in Associate Rig Operation wizard to
avoid navigation to Contractor tab
755091 Well Explorer does not refresh to show found Search item
755090 Internal Picklists require better support for Is Hidden columns
786797 Rig Key in DM_REPORT_JOURNAL is not deleted if Rig Operations has been
removed
767874 Filter the list of contractors/rigs available in the Associate Rig Wizard off of event by
start date and end date
750615 Copy To/Move To command should automatically navigate to the node above the
item you are trying to copy.
750498 PUMP OPERATIONS - The Pump Efficiency is not defaulting from Pump definition in
Rig tab
755089 Internal picklists require better support for Design Phase values
750638 Drillstrings - Convoluted workflow required when sidetracking so that sidetrack BHA
can be seen in sidetrack wellbore
805431 Could not save the form error relating the Bulks and Mud Inventory when using the
VCR Next and Previous Buttons

Release 5000.1.3

There were no OpenWells issues fixed for this release.

Release 5000.1.2

The following OpenWells issues were either addressed or have workarounds for the
5000.1.2 release.

Defect No. Description

165404 Request: AFE vs. Actual cost printout report should be dual currency compatible.
612757 Cannot use a network drive in File Monitor Directory.
622388 Field for Max OD in Casing Report
627775 Need to be able to assign planned Rigs to Job via Rig Operation when previous Rig
Op(s) are not yet completed
630078 Need additional Duration columns (3) for Planned Operations

5000.1.13 Page 216 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

632010 Field to Office Data Transfer tool needs to show if reports have attachments
700873 Request that the Cost Estimate and AFE spreadsheet entry be changed to allow the
insertion of items in between other items, sorting of items, and have the items be
saved in the order that they were entered.
700935 Implement automatic re-connect support to SAM when it goes down
705972 Cement Fluids Calculated Sacks does not have a unit defined - should be 'sacks'
716777 Report locks are not flagged to other con-current users
720881 EPS Login Failure dialog box inconsistent w/ other EDT applications
723609 Encrypted transfer files not deleted automatically by Receiver service
725216 Unit system does not have lbm/cuft or g/cc for Density. Please add these units
725356 Field Office Data Transfer and Report Locking
731641 Field to Office Transfer Utility needs some file cleanup functionality.
733028 Extend EPS Configuration dialog box to support new Option to only send outputs
once Report is Locked
733554 Output Reports from Publishing Service need to be configurable by Event Type
733579 Need better error/process logging in EPS to diagnose adverse behavior
735063 Request to show all NPT reports available for day/well
736897 Request that Data Requester remember the data source for log in to the office.
737125 Encryption Check Box and Working Directory FTP settings not saved correctly for
FOT Configuration
742263 TVD BH, Depth Tab, Wellbore Properties Not Updated from COMPASS
746214 Incorrect Class Assignment for Swell Period on the weather input screen - should be
Time with a unit of Seconds
747097 With AutoCatalog Off in DEF, Bit Operations tab in Drillstrings does not get activated
as a Bit row is added
747339 Need to restart OW for WP DEF's Total Target Duration, Target Cost and AFE Cost
to be correctly calculated (after navigating from WP DEF to AFE DEF and back)
748759 Test Report: Test Method Swabbing does not show all Fields in Swabbing Test
749141 Last Hole Section's last Leak Off Test spreadsheet is not always highlighted
749347 Spell Check not working
749613 Bits Information grayed out after you copy the string from a different well
749714 Component row copy results in user changes not being adequately saved as seen
from PROFILE
750354 Cannot delete BHA Components unless BHA Sensor tab is visible

5000.1.13 Page 217 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

750454 Wellbore Properties - trip Surface Location calculation (from KOP MD value = 0)
when new Wellbore created
750454 Wellbore Properties - trip Surface Location calculation (from KOP MD value = 0)
when new Wellbore created
750461 FODT does not recognize dropped VPN connection
750464 LGC EDM Data Receiver Service - Does not check for database connection when
processing an import. Result is that transfer files go into 'Fail' folder and are no lon-
ger able to be processed.
750466 LGC EDM Data Receiver Service - does not recognize old files, they are ignored. If
the files are in the folder, process them.
750490 Spell Check feature does not process correctly when there is only 1 spelling mistake
in field - displays "No Error" but makes but then loses the correction
750505 Rig equipment updated on field machine e.g., new pump not updated on office sys-
tem after transfer from the field
750569 Daily Operations DEF: If we add Surveys in Survey section, TVD value is not
refreshing in General section.
750605 Refresh issue. Wellbore Equipment components don't show in ESP. Have to exit out
of OpenWells and restart.
750661 When opening OpenWells, remembers last selection, but tree does not automatically
navigate to that selection.
750695 Wellbore Equipment / Casing components had been entered into the DEF are miss-
ing in the spreadsheet but the MD Landed shows a calculated depth.
750928 Survey - new survey defaults the Azimuth to the Convergence
751423 EPS cannot generate the reports when transfer the Event level report.
752099 EDM File System Service doesn't pickup and append manual EDM export XML files
753348 If the customer doesn't refresh the data in Receiver's OpenWells, the locked trans-
ferring data also can be edited.
753856 Transferring a Casing/Test/AFE/DO DEF does not update the Section Complete sta-
tus in an OW session on the receiver
753857 AFE DEF does not get updated in open OW session after Successful Import
754211 Need 'OPEN' & 'CLOSED' items added to MD_PK_COMPONENT_STATUS system
picklist.
754967 Layout Manager - Making the Approvals or Associated Completions tabs invisible
will adversely affect the layout and functionality of the entire Event/Job Properties
window
754968 Expose all DM_EVENT fields to Layout Manager.
755014 The updating component details in PROFILE cannot be populated in the Wellbore
Equipment DEF, unless region OpenWells.

5000.1.13 Page 218 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

755085 Data Validation display does not show Depths adjusted to the current RDL
755109 Online Help needs a correction concerning Contingency Costs.
755574 Parent Wellbore field does not support multiple Sidetracks in the same day
758967 Firing up multiple DSIMP.bat can cause the Receiver machine to hang or be respon-
sive for long periods of time
760163 Field/Office Transfer Status dialog box when using FTP not showing file transfer to
remote site.
760166 Would like ability to merge output reports when saving to file.
760230 Batch Print Wizard should enable selection of reports from other Wells and Events
just like DIMS
760631 Is there anywhere in OpenWells where you can enter information about "prefrac"?
760895 Issue with hole sections on Daily Drilling Report after side track.
763436 14.1.5 onwards: Cannot Save or close DEF after entering LOT - Pumping Details
763436 14.1.5 onwards: Cannot Save or close DEF after entering LOT - Pumping Details
763477 Changing Time Summary Time, causes incorrect NPT Times as Nested NPT and
Net Time is not automatically calculated
764053 D/E Request new jobs, job transfer tool issues
765683 Hole section MD base defaults to MD current when creating a new hole section.
765845 Perforation Report - Why do MD Top and MD Base Default to the Datum Value?
766384 Rig Op Release Date Limitation hinders Pad Drilling Workflow
767043 Need application security support to control user access to Move/Copy Report fea-
ture
767169 We need to honor the sequence_no in CD_VG_METER
768492 Changes to Casing Output Report - Add MD Base, change column order
769197 TVD Values change when switching between Daily Operations DEF's.
769582 EDM Data Receiver Service needs SAM support to automatically notify active Open-
Wells users when new reports have come in and when updates have been made to
existing reports
769630 Enhancement - Ability to edit EPS Email Subject Line
770939 Daily Cost records do not carry over to a new wellbore.
772325 Duplicate default datums created
772435 Well Planning DEF, Sidetracks Area, Spreadsheet, Design field combo box change
is not changing detail panel
774866 Make it possible to attach the custom java code (class/jar) for a single table along
with the Report file instead of putting in commonext.jar

5000.1.13 Page 219 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

775645 Annulus details - depths do not respect viewing datum, results in incorrect calcula-
tion of open hole length.
776059 WYSIWYG Bit "Bottom to Top" Button
776155 NPT Gross/Net Time Defect
777668 PSA CDRS report - unable to map a field to gasReadingInfo/gasHigh
779707 Right Click Options (Cut, Paste, Copy, etc) are not available on the forms
781778 Well Planning DEF, Directional Drilling Plan section CD_SURVEY_PRO-
GRAM.hole_name picklist is not updating
782298 Request that the Well Explorer delete message tell which nodes are locked when
delete will not execute due to locked nodes.
782601 Rig Op Release Date Limitation hinders two active rigs on the same Well Workflow
783492 Daily Drilling Output Report should show all AFE Numbers associated with the
Event.
783493 Request that the AFE No. field be added in the cost detail lines in the Daily Cost Out-
put Report.
783929 Need a link to Rig Operations for editing from the Rig Equipment Editor
784212 C:\temp\dsmail not automatically created and not automatically purged
785125 Tie on point does not use the reporting standard, but all other survey stations do.
785341 SAM message not sent for new rigs
785419 OpenWells Exchange Rate should be utilized to view cost oriented reports.
785868 Extra white space displayed for Time Summary
785888 Locked fields in Well Explorer can be edited through Daily Operations WYSIWYG
DEF
786933 Duplicate Datum when copying Well Planning Report
787323 Cannot access BHA Ops, Bit Ops and BHA Sensors tab in Layout manager to cus-
tomize
787362 Custom WYSIWYG not being imported with configuration import
787797 Clone of 773149: NPT ending activity missing values for new report scenario.
787799 Clone of 773150:Improve wording on NPT copy/move warning dialog box.
788941 UPGRADE: Automate a process to clean up used temp files created by FOT.
790188 Clone of 790084 - Daily Personnel Section - People on Board tab should look up
company using well_id, event_id, and company_id.
790442 Report Generation Error - Java Running Out of Memory
791329 Rig Association not always updating unless close and restart OpenWells
791471 FOT audit update Date/Time displays one digit for time(Minutes) like 10.1am.

5000.1.13 Page 220 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

791533 Time Summary - Duration column sometimes updates
791799 Surface Tanks Calculations do not calculate correctly from one day to the next in the
Daily Workover Fluids Section
792105 Clone of 790338:Memory increase while browsing around OpenWells Hierarchy
causing slow performance
792467 The Actual Design has no associated datum when the user deletes the associated
datum.
792556 R5000.1 does not depth shift log collar depths
792809 When the MD in the Daily Entry Form - General Section is raised, then the Hole Size
and BHP fields no longer calculate.
792903 Adding a new NPT without an end date disabled the NPT button and doesn't display
the NPT created
793222 Deficiency in Save Logic for Time Summary
794369 When a survey is imported, then the Save icon does not activate.
794414 When entering a Perforation Interval, the Top MD and Base MD cannot be entered
794965 Clone of 793109: Need to enter value for <drillReport><versionKind>.
794967 Clone of 793110- Need to enter values for <porePressure><readingKind>
794968 Clone of 793112 - Need to be able to report values for <gasReadingInfo><gasLow>.
794994 Data displayed in the Operation Summary Chart incorrect
795044 Hiding of BHA Sensors tab (in Drillstrings of Daily Operations Data Entry for) causes
newly added BHAs to not show up
795243 Metadata is not loading for output reports when network userid has a special charac-
ter
795296 Request option to not print the TOC on the Casing and Cementing Reports.
795341 OpenWells FTP needs to support Passive mode
795346 D/E Not being able to add DM_ACTIVITY.wellbore_zone_id to spreadsheet
795355 Well Planning Report Hole Plan Section records should stay in the order entered.
795357 WellPlanning - Wellbore Formation - TVD and Base TVD not displayed on output rpt
unless fill in MD and MD Base
795408 PK_EQUIP_FAILURE_TYPE cannot be ordered how we want it.
795642 Need tree model for Under-Balanced Drilling WYSIWYG
795663 Associated Partners Contacts, Data Disappears on Picklist Fields
795695 Depth Reference tab allows multiple Default Datums to be selected
796154 Cannot delete BHA Components unless BHA Sensor tab is visible

5000.1.13 Page 221 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

796155 Picklist will not disappear after a Section Type is selected in the Drillstrings>Compo-
nents tab
796592 Supplemental AFE cost records remain after Supplemental Header is deleted.
796889 Unable to customize or hide Reporting Tab in Event Properties
797013 OpenWells Event Property page not picking up configuration upon Event creation
797050 AFE vs. Actual Report should not include daily cost amounts that are related to
another AFE.
797053 Multi-Well AFE vs. Actual report should not drop daily cost items when there is no
matching item in the AFE.
797199 Created NPT/Failures in Time Summary does not display
797417 When a Project, Site, and Well that is sent has no tight group selected, then the
Receiver fails with no error message.
797998 Print Wizard Print Queue dialog box minimizes when the Options dialog box comes
up.
798049 CDRS report generation unable to generate Norwegian characters correctly.
798057 Cementing Report add Slurry Top TVD and Slurry Base TVD to Fluids section
798213 Add Flowback model to Stimulation Wysiwyg
798778 Clone of 791606: Error copying/pasting assembly component spreadsheets in a cus-
tomized spreadsheet or importing after copying out to Excel
798889 OpenWells is caching too many wells
799227 Making changes and immediately canceling changes to Tie-on-point can cause Well-
bore Properties to show wrong values for Top of Hole KO
799303 Clone of 798818 - OpenWells and COMPASS interaction with SAM and surveys cre-
ating too many SAM messages and OpenWells marking surveys edited that are not
799614 Tie on point is not showing up on newly created Survey.

Release 5000.1.1

There were no OpenWells issues fixed for this release.

5000.1.13 Page 222 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.0

The following OpenWells issues were either fixed or have workarounds for the
5000.1.0 release.

Defect No. Description

178457 Can you pass parameters to the shortcuts in the launch bar
619710 For Wellbore Equip reports, need ability to store these assemblies to a library
619913 Need the ability to import from a Library on the Components Casing Screen.
622375 Threads Tested Field
622381 New Field in Casing Report
622384 TV Depth in Casing Report
626495 DM_COMPANY_DAILY.num_people is not updated correctly when removing all per-
sonnel
628904 User can't see this new Rig Equipment on the report.
705993 Well Planning Hole Sections do not integrate w/ PROFILE and the Tubular applica-
tions
722401 Request that the Hole Sections Section of the Daily Report be changed to make it
easier to understand for beginning users.
726999 No area available to enter free text comments for an installed component
731341 Wellbore KOP Coordinates should be local to Well location, not Site location
731358 When promoting site to FINAL append the scouting description text instead of over-
writing.
733398 Need Drilling Mud Motor RPG stored against Motor definition and Total RPM calcu-
lated in each Daily Report Bit Operation
733458 Layout Manager - need DM_DAILY.liner_top field exposed
745332 Need fields to support IHMP and FHMP
746745 Nowhere to enter Tag MD when installing ESPs below Underreamed section
747263 Leak Off Test calculation in SI units differing by a number as compared to API
747433 WP DEF - Hole Plan Totals should be subtotaled by the current wellbore/design as
that design is shown in the drop-down
747474 Include Tool Description in Survey Tool Picklist, Survey Properties Page
749130 Survey Properties dialog showing wrong TVD value for Side Tracks.
749174 Print Report Wizard--Save the Print Report Wizard Preferences and have ability to
see complete Summary Reports section
749621 AFE Report should not be deleted when AFE association is deleted in Event.
750453 Support simple Hole Sections data entry w/out requiring Details spreadsheet.

5000.1.13 Page 223 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

750495 Pump Operations sub-spreadsheets not intuitive to use.
750854 Gas Concentration (class_id=186)
752198 If possible we need to have an option to invoke Rig Equipment Properties (Pump
Ops, Centrifuge Ops etc) from DO DEF
753590 OpenWells 2003: New units required 100 lib. Sack & 50 lib. Sack
753694 Need to change some default labels in stimulation form
755377 Loss of cursor Focus in Spreadsheet Headers
755413 No place to record Off Bottom Circulating Pressure
755431 Document 702876 - Need EPS support for Auto Publishing 'Changed' Reports so
that reports can be re-cached when reports are changed in office
755441 Cleanup DEF - Site Cleanup section - Spills tab - Button is not called "Import from
Daily Operations", but "Import from Event(s)
755442 Documentation: If required the new elegant Import from Event(s) dialog box in
Cleanup DEF - Site Cleanup section's - Spills tab - "Append and Replace Spills"
options
755448 Document the new feature of how OW is unique in bring in Well Name/API number
from Well Properties to Wellbore Properties
755449 Documentation: New feature: Contractor/Rig properties now has Start and End Date
fields
757232 Cannot start and end the Hole Section on the same day
757325 Request Operator and Reporting Time fields in the Event Properties.
758092 Document how to Increase the maximum JVM size (-Xmx) to 1024m in the Open-
Wells batch file
758202 Require Communication Y/N and Communication Remarks field in Stages section
758206 'Actives Stages' should be labeled 'Active Stages'.
758353 Find feature won't find items contained within Virtual Folders
758734 Site Location for Romanian, Belgian and Bell Wire geographic reference systems
are different between Open Wells and COMPASS
759196 Daily Mud Cost does Not get recalculated when we delete the rows in Mud Inventory
even after saving and reopening
760168 Survey selector in Survey Properties problems w/ SI units
760175 Casing form does not see Pipe Tally form that was just created
763095 MD_PK_PROD_FAILURE_TYPE has no way to be internationalize without breaking
the functionality

5000.1.13 Page 224 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

763107 OpenWells Survey Header Tie-On Point Coordinates for Wellhead origin does not
respect 'Well Centre' coordinate setting for Local Coordinate System configuration in
Project Properties.
763275 WYSIWYG DDR - Print Data Entry form: Print of page view does not fill the 81/2 x 11
sheet. Printed text area is only 4/14 x 7 1/2.
764928 User requests Final Pipe Tally Output Report and Driller's Running Pipe Tally Output
Report have separate column for spare joints listed in the Pipe Information section
766385 Need 'Formation Gradient' field to support alternate MASICP workflow
768500 Add Wellbore Name to Bit Summary Output Report
768617 Request that EDM Publishing Service not select reports in the future.
768892 OpenWells spreadsheet import does not honor any customized settings in regional
settings with regards to digit and decimal separators
769081 Clear transaction description is missed under help menu.
769347 Daily occurrence of SAM error
769593 Update/Highlight in the Online Help that the Wellbore Schematic displays the well
status at the end of the Reporting Period
770137 OpenWells Survey Header Tie-On Point Coordinates for Wellhead origin does not
respect 'Well Centre' coordinate setting for Local Coordinate System configuration in
Project Properties."
770262 Must close and re-open OpenWells for deleted pit to go away on Fluid Volumes.
Refresh problem"
770525 In WYSIWYG, by default Survey Tie-On is User Defined and MD is set to the Datum
Elevation, not to 0.
770771 Wellbore Status History no longer updating Plugback MD
770903 New resistivity fields are needed for the Logging Report.
770937 unable to delete rows from Personnel section with People on Board tab hidden in
DEF
771010 OpenWells, output report doesnt show the last saved days length for drill pipe in
daily operations drill string section
771037 Unit System Editor: Gas-Oil Ratio. where is m3/m3 unit?
771071 <Set default values for Mud Inventory Cost Description on Daily Cost Section>"
771091 Need the ability to support multiple WYSIWYG forms and assign them per preferred
data entry form
771159 Dsimpserv.xml could grow to an unmanageable size
771187 Copy/Paste problem in Time Summary spreadsheet
771469 CDRS wellAlias does not allow for user to pull from CD_WELL

5000.1.13 Page 225 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

771471 CDRS mappings do not allow for literals in the mappings
771505 Daily Cost not populating in Daily Cost Output Report for items not in AFE
771558 Hole Section, MD Base field does not autopopulate/update from current MD until the
DEF in closed and reopened.
771625 On Daily Operations report, field DM_ACTIVITY.Time_To of Time Summary tab is
not working properly.
771631 Copy Well Planning report workflow results in 2 'Planned' Designs within the same
Wellbore."
771999 Allow validation rules to be defined as mandatory.
772005 FOT takes about 10 minutes to transfer a simple company after a long time in idle
state.
772323 Survey Properties - OpenWells enables users to tie-on Surveys associated to Well-
bores not tied to the current Wellbore
772488 Daily Air Drilling Output Report does not show Sections if Hole Section not Present.
772515 Require support for "Rockies" location descriptions.
772658 Move DO DEF from Well 1 / Wellbore 1/ Event 1 to Well 1 / Wellbore 2/ Event 1
causes NPT to disappear
772753 Wysiwyg showing same wellbore for all rows in the hole section spreadsheet
772954 Datum Elevation Should Read 'from Mean Sea Level'
772990 Security Tokens are not working for Attachments
773014 Duplicate Casing OD and MD Shoe values are shown in Actual Casing section of
Depth vs Days Graph
773117 Attachments to NPT and attachments to lessons attached to NPT do not get moved
when a DO report is moved.
773125 Deleting a report with an associated NPT does not delete the NPT nor the lesson
associated to the NPT.
773598 OutOfMemeryError while copy/move a daily report for Oracle.
774506 CDRS wellboreAlias/name and wellboreAliasNamingSystem will not honor two
records
774507 CDRS wellboreInfo/RigAlias information missing tag for NPD Code
774523 Problems with wellDatum tab in CDRS XML result
774543 Casing Output Report issues: MD Top label is missing and Top Connection OD &
Bottom Connection OD values are interchanged in Output Report.
774922 DDR Printed Report - Report Options dialog box needs select all and clear selection
options.
775072 Schematic in Well Planning DEF shows the actual and not the planned data.

5000.1.13 Page 226 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

775073 MD vs Cost graph needs to display details of NPT and casing.
775896 Details Sections Do Not Appear In LOT, BHA Ops, Bit Ops Until Header Line Is
Clicked For The First Time In OpenWells
777044 OpenWells PSA CDRS report, need to map a database field to what is currently a
hard-coded value in Time Summary
777048 PSA CDRS report, unable to map field for temperature tool depth value
777049 PSA CDRS, Logging section is invalid for temperature details
777093 Report Manager Error when Cost Estimate and AFE has no entered cost rows.
777218 PSA CDRS report, unable to map fields for lithShowInfo/tvdTop or tvdBottom
777308 PSA CDRS report - need to map a field to formTestInfo/dominateComponent
777668 PSA CDRS report - unable to map a field to gasReadingInfo/gasHigh
777786 PSA CDRS report, unable to map fields for wellTestInfo/tvdTop or tvdBottom
777792 PSA CDRS, unable to map wellTestInfo/presFlowing
777956 PSA CDRS report - access DM_ACTIVITY table from controlIncidentInfo
778103 PSA CDRS, 6 mandatory fields in wellTestInfo with no way to map them
778994 Daily Actual Costs items do not show on AFE vs. Actual Report if there is no match-
ing AFE item.
779171 Off-Load Pipe Tally Output Report Corrections
779265 Online Help lists the incorrect directory path that the .bar file is saved in when creat-
ing new system shortcuts
779341 Cost Records are not sorted according to Code and Subcode.
779388 Copying a well planning report into a different well misses planned designs & sur-
veys for side-track wellbores in the well planning report.
779580 Survey Header - Tie-on Point not calculated correctly when tie-on point is on a sur-
vey in another wellbore.
779901 WYSIWYG form allows user to change fields that they don't have access to.
781366 CDRS Change the output unit of gasReadingInfo/gasHigh to '%'
783909 Use label to indicate Wellbore Properties General Tab Vertical Section is referenced
from Well-Center.
783989 A user who does not have EVENT.LOCK right is able to lock ALL reports via the right
click menu from EVENT.

5000.1.13 Page 227 of 283 July 2014

 OpenWells Software Release Notes

OpenWells Known Issues

The following OpenWells known issues for releases 5000.1.0 through 5000.1.13.0 are
described below.

Release 5000.1.13

The following are OpenWells software known issues for the 5000.1.13.0 release.

Defect No. Description

941703 If printed report configurations do not contain the *Filtered.xsd and *Tables.xml files,
they cannot be printed.
This issue only affects the OpenWells Standalone install, it does not affect
OpenWells when installed using the EDT installer.

942244 Opening the Catalog Editor from the Well Explorer tree results in an error message.
This issue only affects the OpenWells Standalone install, it does not affect
OpenWells when installed using the EDT installer.

Release 5000.1.12

There were no additional OpenWells known issues for this release.

Release 5000.1.11

The following are OpenWells software known issues for the 5000.1.11.0 release.

Defect No. Description

877372 Stimulation WYSIWYG Report: copy fluids does not copy Kill Fluid when adding
new treatment

900910 In the Daily Cost spreadsheet, during a carry-over to the next day the costs which
are carried over need to maintain the same order as they had on the previous day.

Workaround:
Configure the DM_DAILYCOST.squence_no to be a carry-over.

912460 Property Dialogs not saving data after validation warning.

Workaround:
Correct the failed validation rules prior to saving.

5000.1.13 Page 228 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

911401 Error when exporting transfer file at company level in WellCat, StressCheck, Casing-
Seat, Well Cost, WELLPLAN.

Workaround:
The error that occurs when exporting data from an EDT application, will not cause
any issues with the exported file. To remove the error, run the database upgrade a
second time. When the Version Information dialog opens, select the previous data-
base version (e.g. 09.04.09.170) and run the update.

913804 Production Equipment report "Associated report" picklist does not retain the
selected value after Closing and reopening the report.

913805 "Associated report" picklist in Production Equipment report displays all the Plunger
lift report from all across Wells from all Companies in the Well Explorer.

Release 5000.1.10

The following are OpenWells software known issues for the 5000.1.10 release.

Defect No. Description

868639 Revoking the print token for reports is not preventing users from printing.

868649 When switching to a different unit system in WYSIWYG the unit system message
appears multiple times.

871853 DEF Scouting - When attempting to edit the Location description, the spreadsheet is
grayed out.

872177 The Save button on the WYSIWYG form is enabled even though no data has been
entered and no changes have been made.

873206 Well Location Slot name field is not working correctly. Value of the Name text-box is
disappeared when we select other value at Coordinate type drop-down or re-open it.

873685 Micro Page "Well Properties" on "Location Description" page, Data value disappears
after pressing F7 in a customize field.

5000.1.13 Page 229 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

873896 Cementing micro page, Apply button is not graying out after it has been clicked, indi-
cating that there is still data to save.

874507 Canvas is not updating automatically when the Wellbore Name is changed though
the properties page. The user must first click the Refresh button.

875694 The value range is displayed in tool tip of Township text box is not match with the
one which is displayed in dialog box when user hovers the mouse cursor over that
element and user enters invalid value.

875695 The acceptable value range applied for block text box is different than the one
shows in dialog box

875702 Well Planning report - Offset Wells section - Select Offset Wells/Events dialog. Help
button is disabled

875804 Cementing WYSIWIG - Null label in Stages section.

875814 OpenWells Historian - Approving Test Report throws exceptions.

875911 No Support to customized the Jewelry Details Dialog for Casing Report in Rocket

875915 Adding Datum in Rocket Well-> Depth Reference Data is saved and app doesn't
crash but exception is thrown in the background (logfile).

875944 Rig Equipment Install/Remove date validation is not working in Rocket interface.

876039 On Wellbore Equipment report (in rocket), when copying/pasting any row in the com-
ponents spreadsheet the Section Type and Component Type are not pasting into the
new row.

876137 Well Properties XML/Create Well XML are not dynamically changing the labels
when Offshore and Subsea are checked.

876163 The Event Status spreadsheet and the Wellbore Equipment Umbilicals spreadsheet
buttons to reorder rows (move up and move down) are not working.

876601 Event Total in Daily Operations report not showing the total for ALL events associ-
ated with a single AFE. It is currently only showing the total for the event associated
with the current report. Workaround: Use the Multi Well/Event AFE vs Actual report
to see the cost breakdown across multiple events.

876823 Create an Event using the Create Event Wizard in OW Classic throws exception.
The Event is still created.

876937 In Batch Validation Selected Well combo box is not populated.

877144 The following picklist tables are being unassigned during the database upgrade:
PK_STMPROP, PK_STMTRTFD, PK_STMADUNT, PK_STMADDNM. WORK-
AROUND: Reset the picklist tables manually through the EDM Data Dictionary for
the following fields, as well as any other fields using those picklists.
DM_STIM_FLUID.fluid_name - PK_STMTRTFD
DM_STIM_FLUID_ADD.additive_name - PK_STMADDNM
DM_STIM_FLUID_ADD.additive_unit - PK_STMADUNT
DM_STIM_FLUID_SCHEDULE.proppant_name - PK_STMPROP

5000.1.13 Page 230 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

877372 Stimulation WYSIWYG Report: copy fluids does not copy "Kill Fluid" when adding a
new treatment.

877757 EventAssocRigOp.xml does not display the correct tables for assigning fields in the
Layout Managers spreadsheet UI.

877804 A number of WYSIWYG XML layouts do not display the correct tables for assigning
fields in the Layout Managers spreadsheet UI.

879832 Values in Total Oil Cumulative, Percent Recovered, Load Water Total Cumulative,
Load to Recover in Test section dont update properly when filling data on row 2 and
re-opening test report. WORKAROUND: Re-start OpenWells.

880521 The newly added "Actual Value" field in the lessons property dialog (second tab)
should not be used because of a known data type issue which causes values
entered in that field to not be saved.

Release 5000.1.9

The following are OpenWells software known issues for the 5000.1.9 release.

Defect No. Description

851523 It takes more than 30s to refresh BHA Run micropage when switching from Show All
to Show Selected Wellbore. It takes less time ( 6s) to bring the same micropage up.

852392 Pipe Tally Lock token doesn't respect Tight Group Settings

852501 Cannot create a new database user on Windows 7 - 64 when a database name /
ODBC contains a space

852697 DO Wysiwig formatting - Label fields line are cutoff

853426 Fishing Report displays current and pulled obstructions

853886 Well Explorer Filter not working properly when using Apply to Tree button

854613 Report Type list in the Create Report Type wizard is different depends where the
wizard is launched from

854661 Lock token for OpenWells Reports doesn't respect tight groups.

854670 Duration field in General Work / Work Operation Details report is not updated after
End Date/Time was deleted

854673 Copy Report Wizard expects a wellbore to be selected before General Work report
can be copied

854684 Adding Obstruction in Daily Operations / NPT Properties dialog doesn't update Well-
bore Obstruction section or Wellbore Properties without restarting.

854862 When Daily Operations report is copied to a different event, NPT activity end data in
not set to NULL.

5000.1.13 Page 231 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

854931 When copying or moving a report with a Job Activity section the Job Activity data is
not copied to the new location along with the report.

855173 When Stimulation report is copied to a new well, work strings data is not copied.

855179 When several rows in Centrifuge Operations spreadsheet have a bad data, Data
Validations fails to show all rows for which a rule was broken.

855223 Pick list attached with the Test Name in Test Section of Pressure Survey DEF does
not update the Test Name.

855233 Pumps: do not display in the pump No. order

855420 For ODR/DO/Drillstrings/BHA Run Summary/Components: The Auto populated

fields `Component Status and `Date/Time remain empty as no provisions found in
`Component Catalog and `Component Details properties for these fields

855421 NPT/Equipment Failure Properties - NPT tab - Non Conf No. field does not show
Time in 24 hr format

855425 DO/Fluid Management/Fluid Handling/Fluid Discharges does not carry Description,

Fluid Description and Fluid Recovery tab does not carry over Fluid Type/Type to
next day. Fields not available to set up as carry over.

855562 Able to enter workstring in Fishing report even though a drillstring is currently in the
hole.

855566 Rule Book panel is not updated after a rule was created without refreshing the
screen

855567 Arrival/Departure Checklist order not preserve in DO with newly added entries in Job
Wizard.

855653 A new company is created when Cancel button is pressed in the Company Proper-
ties dialog. This is happening only when there is a DV Rule applies to the company
and the rule fails.

855669 Data Validation rule book which uses comparison between two reports is not exe-
cuted correctly.

855700 Perforation condition is not changing to Neutral when the Hydrostatic Pressure and
the Est Res Pressure are equal.

855861 ERROR WHILE DATA IMPORT IN EDM WITH ATTACHED PARTICULAR DATA
SET.

856034 SlowPumpCode System Setting description needs to be updated to correctly reflect

this feature.

857142 In Rocket Start micropage, field MD KO should be mapped to CD_DEFINITIVE_-

SURVEY_HEADER.ko_md. See workaround below Known Issues table.

857214 Yellow and green check marks at Rocket canvas are not refresh correctly after a dif-
ferent well, event or wellbore was selected. The canvas still shows yellow or green
check for the previous well.

5000.1.13 Page 232 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

857228 Creating a custom unit set based on API including inches fraction for diameters will
result in blank Body OD, Body ID in Wellbore Equip report and DO Hole section

857315 Other daily details micro page, Data of Time and Duration (hr) column in the
Under Balanced Drilling (UBD) Operations spreadsheet cannot be imported. It's only
happens in Rocket MicoPage, in Classic works fine.

857621 Exporting a Job in OW throw exception using Oracle 11

857666 NullPointerException tabbing from Daily Notification Spreadsheet

857717 Cementing DEF -> Stages Spread Sheet: Cut /Copy and paste does not paste the
Pressure Remaining, Plug Bumped and Float held. Also the Pumping Schedules are
not copied.

857767 DM_RISER.riser_angle_limit field can accepts more then 360 degrees.

857909 Unless Saved, Wellbore Formations don't appear in Stages section for a newly cre-
ated Stimulation DEF

857913 Exception in Safety section around MMS Well Activity Form 133 report

858043 Navigation Buttons are missing from Report Data Validation dialog. It happens only
on Citrix.

858064 Launching Edit Rig dialog from Daily Operation report causes report's data to be
saved without confirmation message.

858070 Casing report- Multiple delete doesn't work in Copy TO/From Library dialog. User
can select multiple records but cannot delete it

858075 Locked stimulation report: can still modify field value if opened up using Unit Con-
version.

858079 Stimulation Report min and average calculations treat NULL and 0.0 inconsistently.

858081 Stimulation report: force calculation on the read only calculated field does not work.

858085 Wellbore Equipment report - Umbilical section- Tabbing is not working in the order
expected.

858089 NPT Properties Dialog title has an underscore on title label and does not have an
OpenWells icon

858095 Copying and moving Wellbore Equipment report to a different company/event

throws exception

858380 Construction report - Wellsite construction section - edit location button remain dis-
abled after adding rows to the spreadsheet

858383 Reclamation report, abandonment section, Location description calculated field is

not populating values from construction report

858543 Survey with two Tie On points can be created in a parent wellbore

858699 "Convert Unit" and "Calculate Current Field". Both share same short cut keys "C" in

5000.1.13 Page 233 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

858780 WYSIWIG Layout 2. DM_EVENT.event_objective_1 Picklist is disabled when the

field color is changed.

858782 Copy/Moving a Well Planning report does not copy the Cement Program "Casing
Name" field.

858797 When creating Well Planning report, OW does not recognize a design created in
Compass on a different Machine using the "Create New Report" Wizard Button.

858803 Updating Report Properties (like Reporting Number) does not update DDR WYSI-
WYG pages without reloading the page

858804 Drill String Body OD, Length and Joints are not updated in WYSIWYG pages after
updates from Profile and no SAM messages sent from WYSIWYG to Profile

858805 OpenWells Casing Component Section Type picklists showing Tubing, Bit etc for
certain Casing Assemblies

858834 Copying WellPlanning Report results in CD_DEFINITIVE_SURVEY_HEADER,

CD_DEFINITIVE_SURVEY_STATION being updated with all rows from source to
target. CD_WELLBORE_FORMATION also ends up with orphan rows..

859275 Parent Well of the WellPlanning Report is not checked by default in the Offset Well
Selector Dialog

859495 Daily Mud field in Daily General micropage is not updated after another user made
and saved changes to Mud Inventory. Daily General is not receiving SAM mes-
sages.

859720 Labels in Dev'n Summary Rpt, Section 1.2 are incorrect - OR#319/309

859747 Severe Exception thrown while entering data in Hole section annulus detail with data
where the casing size is magnitudes greater than the hole size. Volume calculations
are throwing the exception in log.

859777 Historian - Clean up report throws severe exception on approval

859793 Historian. No Section Header Label in Compare with Previous Approval point when
Modifying and deleting Support Craft and for BHA Run

860048 Read Only User can still perform Unlock All or Lock All on reports.

860356 Delete a shaker or shaker screen will not cause the associated shaker screen oper-
ation to be deleted. These are then orphaned.

Work Around for DE 857142

The following procedure can be used to alleviate any concerns related to DE
857142 - MD Kick Off is mapped to CD_WELLBORE.ko_md in the Start micro
page and to CD_DEFINITIVE_SURVEY_HEADER.ko_md in the Wellbore
Properties page.

5000.1.13 Page 234 of 283 July 2014

 OpenWells Software Release Notes

1. From the EDM Administration utility navigate to the EDM Application

Settings > Drilling > OpenWells > Layout Manager > WYSIWYG >
Custom > Recordings folder.

2. Select the XML for the Start Operations page.

3. If using the Landmark shipped XML:

a. Right-click on the Recordings folder and select Add New WYSIWYG

File... from the menu that appears.

b. Navigate to the <EDT install directory>\EDM\Site Configuration

Files\Wysiwyg\Landmark\Recordings folder and select the
StartDrilling.XML file.

c. Click the Select button.

The WYSIWYG layout for the XML layout (e.g., StartDrilling.xml) is

displayed in the EDM Administration Utility.

4. Double-click on the Field portion of the MD KO field. The Field Properties

dialog appears.

5. For the Object, select CD_DEFINITIVE_SURVEY_HEADER from the drop

down picklist.

6. For the Attribute, select ko.md from the drop down picklist.

7. Click OK to save changes and close the dialog.

8. Click the Save button in the application toolbar to save the XML layout.

Before a customized layout will appear in the OpenWells application, it must first
be assigned to a Well Site Canvas and the Well Site Canvas must be assigned to
an Event Type. These items are covered in the EDM Administration Utility online
help Custom Well Site Canvases topic.

Release 5000.1.8

There were no additional OpenWells known issues for this release.

5000.1.13 Page 235 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.7

There were no additional OpenWells known issues for this release.

Release 5000.1.6

There were no additional OpenWells known issues for this release.

Release 5000.1.5

There were no additional OpenWells known issues for this release.

Release 5000.1.4

There were no additional OpenWells known issues for this release.

Release 5000.1.3

There were no additional OpenWells known issues for this release.

Release 5000.1.2

The following are known issues for the OpenWells 5000.1.2 release.

Defect No. Description

792911 Refresh issue. Wellbore Equipment components schematic image doesn't show up
in ESP. Have to close and reopen the ESP DEF to see the schematic.
795050 Error printing WYSIWYG Print Data entry form on Vista to a file
795590 Deleting Fluids on Stimulation Report doesn't remove them from them from the
Schedules area Fluid drop-down in Form View until form is reloaded
797323 Report Manager - Canceling action - an exception error is generated
797988 OpenWells Daily Operations DEF: Hole Section Depth is not automatically recalcu-
lated.
798029 Can not generate Wellbore Schematic and BHA Schematic in a single Report
798295 Prompted to save form whenever a spreadsheet date gets focus
798314 3D wellbore graph does not show other wellbores
798877 Default User Symbol Folder for Save Symbol pointing to old folder

5000.1.13 Page 236 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

798982 Creating a new design - entering a new hole section - if you switch between Unit
Systems - hole section disappears
799036 There is an Exception pops up when you add more than 300 rows in Cost Estimate
and AFE report.
799391 Time Summary Total time (Calculated field) is not updating, when switching from
WYSIWYG to Form View
799424 In Daily Operation Report, when a Bulk item is deleted, the corresponding Bulk
Transaction records are not deleted from the database
799425 LayoutDDR wysiwyg - Report number + report date is inconsistent between the
Report frame title bar and the report drop down box (beside the vcr buttons), when
using the vcr button to navigate between reports.
799487 Deleting pump does not delete pump in the database.
799555 LayoutDDR-wysiwyg, able to Add row to spreadsheet even if Report is Locked
799572 NULL Date displayed as 12/31/1969 in WISYWYG Shaker
799575 In DDR, deleting a tie on point of a survey gives a wrong error message.
799589 OpenWells well explorer - grammar mistake in dialog box
799590 OpenWells well explorer allows blank names if renaming directly in tree instead of
from right click Rename menu
799595 In Create Daily Report Wizard, Help button and F1 display Report Command help
instead of Create Daily Report Wizard help
799723 EDM Admin Tool: does not show updated files in XML Preview Panel after import site
config files without a restart
799766 The ComBox in Template Time Related Setting should not allow user to type text
799779 Tab "Approvals" in Event Properties dialog box not updated correctly with report ref-
erenced ON
799914 Casing Output Report - Not showing Job Activity section.
799917 Wellhead Output report - missing "total component cost"
799941 General Work Output report - doesn't show Work Operation "duration" field.
799946 Report can be locked using Event Lock All even without a particular report lock token
granted.
799957 Stimulation DEF, Fluids section calculations not updating for DM_STIM_FLUID.vol-
ume_squeezed DM_STIM_FLUID.volume_washed without F9
799958 Daily Geology Output report - No Value on Daily Cost and Cumulative Total field. The
DEF shows a value on these calculated fields.
799959 Daily Geology Output report - doesn't show Lithology "Interval length" field.
799977 Tight Group's description does not show non-Latin characters correctly

5000.1.13 Page 237 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

800064 Daily Cost Output Report doesn't show Dual Currency Fields
800114 Daily Drilling Output Report - No Fluid Management Content.
800147 BOP list not refreshed without a restart after import
800156 Cannot tab from field to field in Hydrocyclone Details entry form
800401 Copy WellPlanning report generates exception in a certain obscure workflow

Release 5000.1.1

There were no additional OpenWells known issues for this release.

Release 5000.1.0

The following are OpenWells known issues for the 5000.1.0 release.

Defect No. Description

772941 CD_MATERIAL.temp_deration_sched_id, radial_yield_factor, and hoop_yield_factor
were moved to CD_GRADE. Update OpenWells with this change.
773979 Cleanup: User defined 'Sump Sampling' from Construction DEF is not getting associ-
ated
774866 Make it possible to attach the custom java code (class/jar) for a single table along
with the Report file instead of putting in commonext.jar
774965 Jobs tab, Can not delete Job attachments from Associated Data Viewer.
774966 WYSIWYG, DDR: Data Dictionary is showing by default Date only for Survey Start &
End fields in Survey Data section but the fields are displaying Date and Time.
775222 Virtual Folders created in PROFILE are displayed in OpenWells if we disable the VF
feature also.
775337 New Job Wizard, Exceptions are throwing while importing data in Arrival & Departure
Checklist Configuration spreadsheets.
775492 Drill Stem Test Output report, needs to remove column lines in Flow Period section.
Some of the Flow Rate section column lines are displaying in Flow Period section.
776120 Contractors tab, can not access Rig Operation Properties using shortcut key
(Ctrl+Shift+O). It is always opening the Air Package Properties because the shortcut
key for Air package Properties also same.
776389 Entering a Casing row below the Open Hole and selecting from Casing Report
causes Length to populate incorrectly
776444 Cannot Copy/Paste attachments from one node to another node.

5000.1.13 Page 238 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

776594 OpenWells, Contractor tab, Rig equipment should be sorted by install date in the pre-
view pane
777354 Copying the Rows in Hole Plan area of the Well Planning Report moves the focus to
Offset Wells
778281 IndexBoundsException when you switch to Wells tab after deleting wells node from
jobs tab
778350 User should not be allowed to cut the rows using shortcut keys and save the
changes in System Catalogs
778930 Some fields are not importing the values once we Export and Import the Wellhead in
Wellhead DEF.
778931 Clicking on Empty Formation Name picklist in Kick DEF is throwing Null Pointer
Exception.
778932 Event/Job Preview Pane is not displaying completely, it is displaying some white
patch.
779226 Multiple Rheology sections not supported from the WITSML 1.3.1 Fluids file

780361 Need to restrict the field length for Sidetrack No. field in Add Sidetrack/Multilateral
Wizard. Sidetrack No. field is accepting more than two numbers (eg: 001) and throw-
ing exception on screen.

780362 Need to restrict the field length for Version No. field in new Design dialog box. Enter-
ing more than 20 characters throwing unexpected exception.
780948 Daily Ops DEF personnel section shrinks every time you select a row
781186 Well planning casing program spreadsheet sorting is messed up
781540 We can delete DPR Submissions in OW Performance Reviews after Revoking
'OpenWellsPerfReviews.DPRSubmission.delete' token also.
781685 OpenWells- VISTA only. Color scheme messages.
781778 Well Planning DEF, Directional Drilling Plan section CD_SURVEY_PRO-
GRAM.hole_name picklist is not updating without a refresh
781927 Streamline the SAM message dialog box for Well Planning Report when more than
one OpenWells have the same report opened.
781966 Creating a well planning DEF, cancel button is not working properly in the new
design window
782009 Copy Stimulation report from Library is not copying many fields.
782013 ADV, for Lessons, click X button in Confirm Delete dialog box is deleting the lesson.
782058 Copyright information is wrong on all preview panes - says 2006
782369 OpenWells Well / Rig Explorer 'Rename' functionality allows entries in the explorer
tree to be renamed with a null value.

5000.1.13 Page 239 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

782389 Clone of 777925 - PSA CDRS - unable to map equipFailureInfo/equipClass - default
value is not usable.
782494 OpenWells output reports- Well Planning Reports - final page - highlighting strangely.
782503 Wellbore properties - bottomhole location not populated first time
782683 Actual Design doesn't get created from OW Daily Ops or Well Planning Report
782688 Well Planning Report/ launching PROFILE
782777 For a user with no add (token) right for any reports, the 'Next' button in the Create
Report Wizard dialog box is messed up.
782965 OW display Multiple default Datum on import.
783177 In consistent wizard dialog boxes, some have OpenWells icon and some dont
783180 Rig name in rig properties dialog box doesnt get refresh on the rig image title bar
when using the wizards
783195 Hole Section add/delete rows appends if not saved after deletion
783293 Daily Operations DEF, Survey station for a new survey header always default to Nor-
mal instead of Tie-on
783371 Convert Unit (F4) should be disabled for read-only and calculated fields
783409 Lock Wellbore Properties in RTV and clicking on OK button throwing 'OpenWells
could not refresh tree correctly. Please check log message' on OpenWells screen.
783632 Problem: While entering data in Fluids FANN table Daily Report, after tab out from
the deflection field to next row, the prior field (deflection field) it is still focus as active
while the next row (RPM field) first field is also focus but apparently no
783643 Save Failure while creating a Company and adding a Partner without saving Com-
pany first
783718 Number of decimal places should dynamically change with unit system change.
783721 Wellplanning Report Directional Drilling is setting the TVD of the first survey station
equal to the md
783929 Need a link to Rig Operations for editing from the Rig Equipment Editor
784011 OW, Wizards has a disabled <Back> button next to finish button which will never be
used. Remove the back button if there is no next button on the wizards
784095 Selecting Rig Type in the Create New Rig Wizard without using the mouse doesnt
display in the Rig properties dialog box, hence wrong Rig image displays
784178 Moving Daily Operations DEF from one Well to another Well throwing exceptions
with a particular data set.
784211 Standardize shortcut for Delete to match rest of D&C
784222 DDR WYSIWYG - Mud Inventory Spreadsheet Invalid Value Message Box is not
closing when clicking "Yes" to continue editing the cell.

5000.1.13 Page 240 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

784224 DDR - WYSIWYG - Ctrl C/ Ctrl V - should not be working for these Spreadsheets, no
copy and paste available from menu
784231 WYSIWYG survey data section, user shouldnt be able to insert survey stations
same as in Form view
784267 Wellbore Properties ask for Save even though no changes have been made.
784308 Catalog button should be disable when the Drillstring Section is Locked by SAM.
784338 OW Performance Review (Rushmore) - Wrong tab index order

5000.1.13 Page 241 of 283 July 2014

 OpenWells Software Release Notes

PROFILE Software

Enhancements Fixed Issues Known Issues

The 5000.1.13.0 release adds new and drops some existing supported platforms, plus
adds enhancements, fixes, and known issues from the 5000.1.0 and subsequent EDT
releases. One enhancement was made in PROFILE software for the 5000.1.11.0
release.There are bug fixes in the PROFILE software for the 5000.1.13.0 release.

PROFILE Enhancements and New Functionality

The PROFILE enhancements and new functionality for releases 5000.1.0 through
5000.1.13.0 are described below.

Release 5000.1.13

There are no enhancements to PROFILE for this release.

Release 5000.1.12

There were no enhancements to PROFILE for this release.

Release 5000.1.11

The Profile schematic drawing algorithms have been improved to provide better
representations of complex completions. By default, the new drawing algorithm will be
used. If you wish to continue use with the original drawing algorithm you have the
option to do so by setting the new PROFILE system setting, UseNewScalingAlgorithm,
to N.

Release 5000.1.6 through 5000.1.10

There were no enhancements to PROFILE for these releases.

Release 5000.1.5

Includes several PROFILE schematic fixes and 3 WELLPLAN defects from

2003.16.1.22.

5000.1.13 Page 242 of 283 July 2014

 OpenWells Software Release Notes

Fixed issues showing status of strings/components in the schematic.

Approval Process - The OpenWells and PROFILE applications now includes a
feature to mark and identify Wells, Events and Reports that have gone through an
approval process. The approval process preserves and locks the information
recorded about the Well/Event/Report at the time of approval. The information
preserved for a Well includes the Wells data and its Events, Wellbores,
Completions and Reports data. The information preserved for an Event includes
the Events data and its Reports.

Any PDF files that are attached to an approval point are electronically signed when
a Well, Event or Report is prepared for approval and when the Well, Event or
Report is approved.
Approval Tokens - New tokens have been added to the EDM Administration
Utility to support the new Approval feature. Admin.Historian.edit,
EDM.Explorer.approve, EDM.Explorer.Well.prepare,
EDM.Explorer.Event.prepare, EDM.Explorer.Report.prepare and
EDM.Explorer.Well.viewapprovalhistory.
Approval Point Stamp Location - The location of the Approval Point PDF stamps in
the OpenWells and PROFILE applications can be configured using a system
setting. See the PDF Approval Stamp topic in the EDM Administration Utility
online help.
New Report Manager Version - A new Report Manager version, which will reduce
memory consumption, increase report generation speed, and contains various
other improvements.
PROFILE Schematic Tokens - Three new PROFILE system settings can now be
added to the EDM database.
Dual Centered Components - assign specific components to always draw
centered on dual completions.
Low Priority Components - assign lower priority to certain components drawn
in a schematic that can be smaller than others to make more room for the more
important symbols.
Use 2D Symbol Scaling - render the 2D packer symbols, expand the casing so
it doesnt
need to bend the dual completions and also use a few other options only
normally needed by the 2D symbol set.

Release 5000.1.4

There were no enhancements to PROFILE for this release.

5000.1.13 Page 243 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.3

New platforms are supported.

Release 5000.1.2

The PROFILE 5000.1.2 release is an incremental update of the 5000.1 version of

the PROFILE software release. A number of enhancements and new features have
been added for this release. New features provided with this release include:

Sequential Schematics - Sequential Schematics enable users to display

schematics with a large number of components in a neat and easily readable
fashion. The Sequential Schematic object allows users to break a schematic down
into a number of sections, thereby improving the schematic displayed.
Concentric and Dual completions display sequentially in the Wall Plot, a line
appears across the schematic showing where the overlapping equipment occurs
or where the second completion begins.
Stimulation Treatments - The Stimulations tab now contains a spreadsheet to enter
Treatments data. This allows users to record multiple treatments being used during
a Stimulation Job.
Workspaces - Workspaces can now be used to create a group of Wall Plot
templates that can be applied to any Design in a specific order.

In addition the following enhancements have been added to this release:

The Wall Plot Composer's 3D Graph now shows all of the Well's sidetracks, with
the current wellbore displayed in blue and all other wellbore paths are displayed in
black.
The Components spreadsheet of the Drillstrings/BHA tab can now be set to
automatically calculate the Drill Pipe length. See the Auto Calculate Drill Pipe
Length topic in the online help.
A number of enhancements have been added to the Wellbore Schematic Tracks
tab, the Sequential Schematic Tracks tab, the Wellhead Schematic Object
Properties Tracks tab and the Multi-Lateral Schematic Properties - Tracks tab,
including:
Text Wrap Limit: A text wrap limit has been added to the Tracks tab to reduce
overlapping schematic tracks.
Import Schematic Track: An Import Schematic Track button has been added to
allow users to import pre-configured Schematic Tracks from a .STRACK file.

5000.1.13 Page 244 of 283 July 2014

 OpenWells Software Release Notes

Export Schematic Track: An Export Schematic Track button has been added to
allow users to export pre-configured Schematic Tracks to a .STRACK file.
These tracks can then be imported and used in another Wall Plot.
Duplicate Track: A Duplicate Track button has been added to allow users to
make a copy of the selected track.

Sequential Schematics
Often, a Wellbore containing numerous components does not display in the Wall
Plot Composer in a neat and easily readable fashion. The Sequential schematic
object solves this problem by allowing users to break a schematic down into a
number of sections, thereby improving the schematic displayed.

A visual example of the difference between a schematic displayed using the

Wellbore Schematic and the same schematic displayed using the Sequential
Schematic is outlined below. This example shows a Dual completion, but the
Sequential schematic works the same way for Concentric completions as well.

Concentric and Dual completions display sequentially in the Wall Plot, a line
appears across the schematic showing where the overlapping equipment occurs
or where the second completion begins.

5000.1.13 Page 245 of 283 July 2014

 OpenWells Software Release Notes

Figure 1: Dual Completion as shown using the Sequential Schematic

Alternative methods to add a Sequential schematic to the wall plot page:

Right-click the wall plot page, select Schematic > Sequential Equipment from
the drop-down menu. Move the cursor to the wall plot page, click and drag an
opening for the schematic to be placed on the wall plot.
Click the Sequential Schematic button ( ) in the Object Toolbar. Move the
cursor to the wall plot page, click and drag an opening for the schematic to be
placed on the wall plot.
The Sequential schematic object can contain a number of tracks which may include
Casing Details, Casing Depths, Wellbore Equipment Depths and other information
as well as the drawing itself. A number of different schematic track types are
supported. Tracks can be selected using the Tracks tab in the Schematic Object
Properties dialog box.

5000.1.13 Page 246 of 283 July 2014

 OpenWells Software Release Notes

Stimulation Treatments
The Stimulations tab now contains an additional spreadsheet to enter Treatments
data. This allows users to record multiple treatments being used during a
Stimulation Job.

The top spreadsheet provides a means to enter the Stimulation Job. The middle
area of the tab provides a means to record one or more Stimulation Treatments
that are pumped into the Well for each Stimulation Job. The bottom spreadsheet
allows you to enter specific Stages of each Treatment.

Each of these spreadsheets are inter-linked, meaning that you must select a
Stimulation Job to view the Treatments used during the Job and you must select a
specific Treatment to view the Stages occurring during the Treatment.

Figure 87: Stimulations Tab in the PROFILE application

5000.1.13 Page 247 of 283 July 2014

 OpenWells Software Release Notes

Workspaces
In the PROFILE application, workspaces are used to create a group of Wall Plot
templates that can be applied to any Design in a specific order.

Note:

Workspaces in the PROFILE application perform much the same way as

they do in the WELLPLAN application, but are different than the
WELLPLAN Workspaces.

Workspace Folder
Prior to creating a Workspace a location where the Workspaces will reside must be
defined. The location is defined using the Edit > Workspace Folder command and
entering the location.

Workspace Folder Notes:

Local drives, mapped network drives and UNC paths are supported.

The Workspace folder defined must already exist. The PROFILE

application will not create the folder.

The user must have permission to change the registry setting

HKEY_LOCAL_MACHINE\Software\Landmark\EDT\5000.1\Profile string
value Workspace Folder. By default, most users should have permission.

In the case of a Citrix environment, the Citrix Administrator may have to

set the Workspace folder for the Citrix PROFILE users.

Caution: If the Workspace Folder location has been set by the

Administrator in a Citrix environment, check with them before changing it,
as you may affect other users.

Working with Workspaces

Workspaces are created when a group of existing Wall Plots is saved using the
View > Tabs > Save Workspace command. Each Wall Plot is saved to an individual
.PPC file in a folder named for the workspace. For example, the following
screenshot shows the files that make up a Workspace called Completion. This
workspace contains 4 pre-defined Wall plots BHA Summary 2, Directional
Completion, Wellhead Summary and Summary. A .PPC file appears for each of the
defined Wall Plot templates.

5000.1.13 Page 248 of 283 July 2014

 OpenWells Software Release Notes

Figure 88: Workspace and the template Wall Plots.

Notice the numbering on the Wall Plot file names. This numbering defines the order
in which the Wall Plot will appear in the application.

If a user were to apply the sample Workspace shown above to an open Design, the
four Wall Plot templates would be applied to the Design.

Figure 89: Sample Completions Workspace applied to a Design. Notice each of the
Wall Plot templates that have been applied to the Design.

The number appearing before the .PPC file indicates the order in which the Wall
Plots appear in the design.

5000.1.13 Page 249 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.1

WELLCAT was added to the EDT suite of applications for the first time in the 5000.1.1
release. Also, some Common Well Explorer enhancements were made. (See EDT
Software for details). This update release improves the import/export and sharing of
Grades, Pipes/Connections between StressCheck and WELLCAT, improves the
integration between StressCheck and WELLCAT, and repairs critical defects affecting
key StressCheck and WELLCAT application functions. No enhancements were made
to the PROFILE software.

Release 5000.1.0

The 5000.1.0 release of Engineers Desktop supports the Microsoft Vista operating
system, has new LAM (FLEXnet Publisher) licensing and contains some critical bug
fixes. Well Cost was added to the EDT suite of applications for the first time in this
release. For the PROFILE application, the following enhancements were made:

Sub Assemblies are now supported within PROFILE. This allows for portions of a
Completion String (i.e., the Sub Assembly) to be planned independently and then
inserted into the overall wellbore equipment string.
Added or enhanced content of Data Boxes for the following objects:
Sub Assemblies
Wellbore Details for Multi-Lateral Wells
Perforations
Cementing
Reference Datums
Wellbore Formations/Wellbore Zones
Wellbore Equipment Details
Wellhead Equipment
Casing Assembly Details
Well Summary
Hole Sections
Mud Program
Well Remarks
Stimulations
Wellbore Openings

Other Data Track and Data Box enhancements to Wall Plot Composer
allow sorting of components in Wellbore Equipment Details and Casing Details
allow insertion of current date/time

5000.1.13 Page 250 of 283 July 2014

 OpenWells Software Release Notes

allow control of decimal places

filter out cement that has been drilled out
multiple pages of a PPC can be grouped and printed out at once

Sub Assemblies
A Sub Assembly is a sub-set of the completion assembly. It is made up of a group
of adjacent tools, provided by a single service company, that are constructed,
assembled, tested and then sent to the wellsite to be installed with other Sub
Assemblies. Engineers designing and installing completion assemblies need to be
able to manage completion make-up by Sub Assembly.

To address this, PROFILE now contains a Sub Assembly tab. This tab allows users
to build a Sub Assembly from a list of components, using the same methods
available to the Wellbore Equipment tab (i.e., drag/drop, manual entry and/or
catalog integration). Jewelry and Umbilical properties are also available from the
Sub Assembly tab. Users can add and edit Sub Assemblies or use the Sub
Assembly Library to Import or Export Sub Assemblies.

The Sub Assembly tab displays a visual representation of the selected Sub
Assembly string in the Well Designer tab and allows for the collection of Sub
Assembly data, such as:

name,
number,
number of sub assemblies delivered,
identify the primary Sub Assembly run (in the case where more than one is
delivered),
the vendor who provided the Sub Assembly, along with their contact details,
comments,
and installation instructions.

5000.1.13 Page 251 of 283 July 2014

 OpenWells Software Release Notes

Figure 1: Sub Assembly Tab in PROFILE

Sub Assemblies in the Wellbore Equipment tab

In the Wellbore Equipment tab, a Sub Assembly can be inserted or added to the
end of the string using the Add Sub Assembly button ( ) and the Insert Sub
Assembly button ( ) located in the Component Details spreadsheet. PROFILE
does not allow components to be added to the middle of an existing Sub Assembly.

The Sub Assembly mode button ( ), in the Wellbore Equipment tab, allows users
to see what components belong to each Sub Assembly. Each Sub Assembly is
highlighted in a different color. Components that are not part of a Sub Assembly
are highlighted in grey.

5000.1.13 Page 252 of 283 July 2014

 OpenWells Software Release Notes

Figure 90: Schematic showing two sub assemblies; one in blue and one in green

When this mode it turned on, users can click adjacent components and create a
Sub Assembly from in the Wellbore Equipment tab. This can be accomplished by
selecting a number of adjacent components, right-clicking on the components and
selecting the Create New Sub Assembly command from the menu that appears.

Once created users can click the Sub Assembly button ( ) at the top of the
Wellbore Equipment tab; select the new Sub Assembly; and click the Copy to Sub
Assembly Tab button ( ) to add the Sub Assembly to the Sub Assembly tab to
use it in building more Wellbore Equipment strings.

5000.1.13 Page 253 of 283 July 2014

 OpenWells Software Release Notes

Figure 91: Select Components to create new Sub Assembly

Figure 92: Click Copy to Sub Assembly Tab button to add new Sub Assembly

5000.1.13 Page 254 of 283 July 2014

 OpenWells Software Release Notes

Sub Assemblies can be added to the Wall Plot Composer using the Wall Plot
Composers Object Toolbar. A schematic of all components supported in the Sub
Assembly can be added using the Sub Assembly Object button ( ) and tracks
can be added using the Data Box button ( ). An example of a Sub Assembly Wall
Plot Composer layout (SubAssembly.ppc) is included with the installation. By
default, this file is located in the <5000.1 install directory>\Profile folder.

Figure 93: SubAssembly.ppc sample

Wellbore Equipment tracks can be configured to highlight Sub Assemblies in the

Wall Plot Composer.

5000.1.13 Page 255 of 283 July 2014

 OpenWells Software Release Notes

Figure 94: Sub Assembly components highlighted in the Wall Plot Composer

Data Box Enhancements

Several fields have been added to Data Boxes to support more Wellbore details.
Additionally, the following new Data Boxes are now available for Perforation tracks:
Planned Cement Program, Mud Program, Well Remarks, Wellbore Formations
and Wellbore Zones within Perforation tracks.

Users can also filter cement that has been drilled out, control decimal places on
numeric fields in data tracks and control detailed string component sorting.

5000.1.13 Page 256 of 283 July 2014

 OpenWells Software Release Notes

Multi Page printing

PROFILE now allows users to print multiple pages of a PPC file at one time. By
default, this feature is turned off. It can be enabled through the File > Enable Multi-
Page Printing menu command.

Figure 95: Enable Multi-Page Printing command

PROFILE notifies the user if any pages are set to different printer page size and
verify scaling options.

New Completion Symbols

Four new completion symbols are now available in PROFILE. These symbols were
developed in conjunction with the Halliburton Completions Engineering team.

Figure 96: New Completion symbols

5000.1.13 Page 257 of 283 July 2014

 OpenWells Software Release Notes

PROFILE Fixed Issues

The PROFILE issues fixed for 5000.1.0 through 5000.1.13.0 are described below.

Release 5000.1.13

The following issues were fixed for the 5000.1.13.0 release of PROFILE software.

Defect No. Description

926842 Tether Lines do not disappear when Tether Lines Checkbox is not checked if
Floating Labels Checkbox is checked.

Release 5000.1.12

The following issues were fixed for the 5000.1.12.0 release of PROFILE software.

Defect No. Description

924695 Using the Profile Symbol Map (View - Symbol Map menu) will cause Profile to crash
if the DM_STIM_STAGE.stage_type picklist has been removed from the configura-
tion
919892 Field not populating: concentric_assembly_wb_id after database upgrade

Release 5000.1.11

The following issues were fixed for the 5000.1.11.0 release of PROFILE software.

Defect No. Description

785276 Cement Plug Drawing Issue - bottom plug is not drawn correctly
815422 PROFILE does not support Wellhead Pressure Rating fields that are supported in
OpenWells
847680 Add virtual calculated value for Air Gap to Reference Datums Data Type for Data
Box in Profile wall plot composer
854181 Need to set a depth for wellhead below ground level
854739 Would like support for LOT/FIT data in Profile Templates
855229 Completion Assembly drawn past bottom of Wellbore in certain data scenarios
855236 Well sketch doesn't show differences between od's in a completion. For example the
completion has od's of 5 1/2 , 4 1/2 and 3 1/2. It will drawn as one line.

5000.1.13 Page 258 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

857686 Chemical Injection line should end at the bottom of tubing hanger in Profile Sche-
matic
859977 Request Additional Y block Symbol For Xmas Tree
862345 Tubing summary information not available in Profile Data Track in WPC
869828 Depths do not order in Profile in 5000.1.9.
873687 Company Logo is not saved when selected in the company properties dialog.
877538 Attachments from the attachment dialog are not opened by Double clicking the
attachment or clicking the open button.
879621 Profile Rod String tab - Copy/Paste a row crashes Profile
884127 Ability for Schematics to be easier for user to distinguish between casings and com-
ponents when linear scaled or non linear scaled schematics are drawn
884225 Drilled Out Cement Plug Issue in Data Box
884775 Printing (To Printer or PDF) causes a reload and hidden text reappears in the Well
Schematic Designer (WSD)
885059 Wellhead Data Box shows components after Component Removal Date.
887586 Add API No (CD_WELLBORE.api_no) to the Wellbore Data Box
890794 Completion string passed bottom of the hole
892365 Request for Control line Cut - Add support for Umbilical Top MD which would restrict
PROFILE to only draw a line from the connected component up to the Top MD.
892533 Cement does not draw correctly between Intermediate Liner and Production liner
with certain data scenarios.
895681 Bridge Plugs are being drawn incorrectly - wrong depth in Profile well designer
896632 BHL Lat/Long output to Deg, Min, Sec
896633 Data and template scenarios can result in a gap in the schematic.
898742 Require Umbilicals Support in Casing Report for Profile.
900442 Wellbore Equipment issue where WBEQUIP Assemblies could not be located inside
other WBEQUIP Assemblies unless the MD_TOP of the current assembly was
deeper.
907452 PROFILE Assembly Details editor not available for Casings
907453 PROFILE Assembly Details data box rendering issue
907526 Rendered cement sometimes shows a thin line joining one job to the next.

5000.1.13 Page 259 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.10

The following issues were fixed for the 5000.1.10 release of PROFILE software.

Defect No. Description

872293 When a casing report is moved, the related records in CD_CASE are not being
updated with the new assembly_id from the CD_ASSEMBLY table.

Release 5000.1.9

The following PROFILE issues were fixed for the 5000.1.9.0 release.

Defect No. Description

795920 Profile does not seem to take into account the individual status of each Wellbore
Obstruction listed in the Wellbore properties in OpenWells.

797482 Move Up/Down Feature in Wellhead Components Editor.

807152 Compass does not update CD_WELLBORE.ko_md (Kick Off MD), resulting in Pro-
file updating CD_DEFINITIVE_SURVEY_HEADER.ko_md (the definitive survey MD
Kick Off) with the wrong value

811415 Schematic for CT & Injection Lines.

821802 PROFILE: Data Box output includes an extra grid line between the Item Description
and #Jts columns

833835 SAM Locked design can still be edited hence throws exceptions in OpenWells.

842699 PROFILE - WSD modifications being lost when Design is Saved and Re-opened.

844133 Profile changes event code when navigating from Audit tab to General tab.

837769 Request Data Box support for Wellbore Zones in the Wallplot Composer.

837782 Request a Wellbore Zones track for the Schematic.

844686 Changes made by a user in Profile cause a loss of unsaved operations input in
OpenWells when users are on the same well at the same time.

846932 Riser subsea detail to platform not rendered

846933 Tubing Data Box interval depths not included, difficult to reproduce format Text box
usability improvement required.

846928 Wellbore Openings (Perfs) annotation tether lines draw to middle of sketch, not to
symbol on outside of sketch

846929 Minimum IDs not highlighted in sketch (little red boxes)

846934 Completion Fluids Not able to annotate Completion Fluids in well sketch.

846926 TOC tether lines should draw to top of cemented interval, not to middle of the sketch

5000.1.13 Page 260 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

846927 TOC annotations do not include Assembly Size

843571 CLONE OF 843570 FOR FIX IN 5000.1.9 Dual string completion automatic compo-
nent label placement in wallplot composer.

853010 PROFILE - Component Serial Number not displayed in PROFILE Component Prop-
erties

855607 SP#952-Profile-Recent drop down list, works for designs. Does not work when
selecting any other node.

855231 SP #949 Profile Depths and Wellbore Opening Rendering Issue

854199 Item description required in umbilicals tab drop down. SP565

857919 Located Inside in Wellbore Equipment disappears after picking it the drop down

853520 Text overlapping in label tracks

Release 5000.1.8

There were no PROFILE issues fixed for this release.

Release 5000.1.7

The following issues were fixed for the 5000.1.7 release of PROFILE software.

Defect No. Description

810655 Removing Surveys from Well Designer/Trajectory tab once added (no Compass).
812063 Require the ability for PROFILE to be able to display Stimulations across multiple
Events
812085 Cement rendering issue due to bottom depth comparison
818615 PROFILE 2003.16.1.23 We have issues with the Stimulations data entered against a
specific event that appears to be related to dates of event yet all stim data is within
the start end date of specific event
818841 PROFILE issue rendering Cement around Slotted Liner Completion in Multi-Lateral
Well displayed incorrect on interactive schematic
822218 RELATED TO 750445: Profile: Need 'Flip Assembly' feature to resolve issue where
user entering components in wrong order
825096 Changing Active Unit System in Profile changes Datum stored in database
828577 DEFECT: PROFILE: Crash Opening Designs - application crashes with no error
828586 PROFILE SCHEMATIC: schematic draw incorrect - conflict caused by cement and
casing shown incorrect

5000.1.13 Page 261 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

831061 CD_ASSEMBLY.remarks field exposed for ACTUAL designs

Release 5000.1.6

There were no PROFILE issues fixed for this release.

Release 5000.1.5

The following issues were fixed for the 5000.1.5 release of PROFILE software.

Defect No. Description

95126 PROFILE should be able to draw Y blocks and H members of a completion string

777656 Event dates in OpenWells causing problems in Profile

784951 Symbols are being squashed in the schematic so they only show a straight line.

790056 Pip tag information does not show up on the Wall Plot Composer

790273 Error in Well sketch with Production Liner and Fish

795610 Components appearing at the wrong locations in the schematic on diagrams in Pro-
file.

800563 Schematic scaling issue with units.

806531 EPS Configuration screen - Well list filters should be stored in and used from a
shared folder.

807697 EPS does not name file exports correctly if report_no is null

808734 EPS can not generate reports against some large Oracle databases

809947 Report Manager does not generate more then one Profile or Compass WallPlots

810631 Enhancements to the schematic engine to better support drawing of dual comple-
tions and Y-Tools using 2D symbols.
Note: See required system settings above to enable and control the behavior of Pro-
file when drawing schematics.

810633 Provide the option to draw schematics with a constant diameter based on the
assembly size.
Note: This change requires the user to enable the "Use Assembly Size for Compo-
nent Diameters" option in the "Well Designer" > "Schematic Detail" menu in Profile.

810634 Provide a way to include the users credentials as a signature when generating well-
plots.

811016 Status of strings/components (Installed / Pulled / Partial Pulled) is not always

respected in Schematic i.e Retrievable Packer & Casing cut

5000.1.13 Page 262 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

812752 PROFILE 5000.1.2 crashes in the Citrix environment

813738 PROFILE closes when adding wellbore equipment - Vista only.

817151 Clone of 759384:Profile WPC become unusable across application

Release 5000.1.4

There were no PROFILE issues fixed for this release.

Release 5000.1.3

There were no PROFILE issues fixed for this release.

Release 5000.1.2

The following PROFILE issues were fixed for the 5000.1.2 release.

Defect Description Version Comp Level Comp Level 2

No. 1
726251 Need additional equipment components 2003.14.1. Well Designer Wellbore/Com-
supported for certain Section Types 0 pletion Tab
730570 Depth Reference Datum Shows -0.00ft 2003.14.1. General
Air Gap 0
731481 Need to be able to include Change His- 2003.16.0. Templates/
tory as a data box in a profile template 0 Frames
732918 Would like to filter schematic content by 2003.16.0. Wall Plot Schematic
Section & Component type same as Well- 0 Composer Object
bore Equipment track
733264 No symbol available for solid block xmas 2003.16.0. Symbols
trees - UPDATE: symbols are created - 0
need to be put into the install
738481 Incorrect schematic after installing well- 2003.16.0. Well Designer
bore equipment components (transfer) 0
741746 Manual text entries being overwritten by 2003.16.0. Well Designer Wellbore/Com-
value from picklist 1 pletion Tab
744640 Chinese Locale: Invoking Event Proper- 2003.21.0. Core App Well Explorer
ties dialog box in FOT/Profile causes 0
Uncaught Java exception and crash

5000.1.13 Page 263 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Version Comp Level Comp Level 2

No. 1
726251 Need additional equipment components 2003.14.1. Well Designer Wellbore/Com-
supported for certain Section Types 0 pletion Tab
745088 Casing Design copy from Actual Design 2003.21.0. Core App Well Explorer
to a different Prototype Design does not 0
show Casings at the Prototype Design
746242 Need to store the symbol width setting 2003.16.0. Wall Plot
with a schematic 1 Composer
748665 PROFILE:Casing Jewelry column is not 2003.21.0. Wall Plot Data Tracks
showing selected fields information. If we 0 Composer
add any field it is showing only blank.
749429 Stimulation Stage Comments fields is 2003.21.0. Wall Plot Data Tracks
required for Wall Plot Composer in PRO- 0 Composer
FILE. Currently there is no way to see
Stimulation Stage Comments in PRO-
FILE.
750368 PROFILE - Drillstrings should show Bit 2003.14.1. Well Designer Drillstrings/
number in assembly spreadsheet. 0 BHA
751122 751122, Request capabilities to auto cal- 2003.21.0. Well Designer Drillstrings/
culate Drill Pipe length in PROFILE Drill 0 BHA
strings/BHA spread sheet as individual
BHA Component length is changed
751906 Separator Properties has no effect on 2003.21.0. Wall Plot Data Tracks
Schematic 0 Composer
751911 Changing Label properties of Line Data 2003.21.0. Wall Plot
for Plan All Wellbores plot has no effect 0 Composer
on graph and the entered Label is gone
next time the Properties dialog box is
opened
753100 PROFILE has no default symbols for Adj. 2003.21.0. Symbol Man- Symbol Map-
Near Bit Reamer and Core Barrel 0 agement pings Editor
753305 In Mapped Symbols Update button does 2003.21.0. Symbol Man-
not call for Save action and hence Sym- 0 agement
bols cannot be saved
755539 Live schematic displays differently on 2003.16.1. Well Designer Interactive
change of active unit system 2 Schematic
756839 Umbilical functionality unstable. 2003.16.1. Well Designer
2
756880 WPC Schematic Toolbar Problem 2003.21.0. Wall Plot
0 Composer

5000.1.13 Page 264 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Version Comp Level Comp Level 2

No. 1
726251 Need additional equipment components 2003.14.1. Well Designer Wellbore/Com-
supported for certain Section Types 0 pletion Tab
757405 Installed Tieback Packer causing design 2003.16.0. Well Designer Interactive
to become crooked when it is not a dual- 2 Schematic
completion
757557 Comp Type Code Default Behavior for 2003.21.0. Well Designer Casing Tab
Centralizer Jewelry 0
758023 Wall Plot Composer tab: Wellhead Hang- 2003.21.0. Wall Plot Data Tracks
ers Data Track is not showing data for 0 Composer
Single Schematic Drawing.It is showing
data only for Wellhead Schematic Draw-
ing.
758350 Need a Formations databox in Wall Plot 2003.16.1. Well Designer Trajectory Tab
Composer 2
758583 Wrong formation texture being drawn in 2003.16.1. Well Designer Trajectory Tab
WPC 2
758748 String Component Item Description cre- 2003.21.0. Unit Manage-
ated from Catalogue selection does not 0 ment System
include Unit Labels
759525 PROFILE invalid state This Section > 2003.16.1. Wall Plot Schematic
Total Number of Sections 4 Composer Object
760770 Length from Catalog selection does not 2003.16.1. Well Designer Wellbore/Com-
update MD Landed on the fly and sche- 4 pletion Tab
matics not correct
762961 Wall Plot Composer Days v. Depth graph 2003.14.1. Wall Plot
functionality 0 Composer
764203 Need support for BHA Program data box 2003.21.0. Wall Plot Data Box
in Wall Plot Composer 0 Composer Object
764631 Default.ppc Template specifies Drilling on 2003.16.0. Wall Plot Data Box
last day of Completion Event. 5 Composer Object
765894 Component Install Date should default to 2003.21.0. Well Designer Wellhead Tab
the Install Date for the assembly. 0
765945 PROFILE does not show the name of the 2003.21.0. Well Designer Drillstrings/
Drill string/Work String in Data Quality 0 BHA
Date Ranges tab
767408 Java Exception when trying to copy/paste 2003.16.0. Core App Well Explorer
PROFILE Template 4
778782 Enhancements to support StatoilHydro 2003.16.1. Wall Plot Schematic
evaluation of PROFILE. 6 Composer Object

5000.1.13 Page 265 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Version Comp Level Comp Level 2

No. 1
726251 Need additional equipment components 2003.14.1. Well Designer Wellbore/Com-
supported for certain Section Types 0 pletion Tab
781985 User can not select Zone Name in Well- 2003.16.0. Wall Plot Data Box
bore Openings data box in PROFILE 6 Composer Object
783392 Tubing Hanger Assembly picklists need 2003.21.0. Well Designer Wellhead Tab
to show more description of each assem- 1
bly - should list by Assembly Name (Cur-
rent Status).
784439 Well Designer, Well Plot shows side- 2003.21.0. Core App
tracks not yet kicked off 0
784780 Show Wellbore Properties fields in WPC 2003.22.0. Wall Plot Data Box
Data Box 0 Composer Object
786799 The top of the casing in the 9 5/8" casing 2003.16.1. Well Designer
string below the casing hanger has be 8
789647 The cement overlaps the hole and some 2003.16.1. Symbols
of the casing/ casing equipment. 8
790976 PROFILE Stimulation Display Issue 2003.16.0. Core App Date Bar
1
792417 Invalid Data QA errors displayed for Hole 2003.16.0. Well Designer Hole Sections
Section & Sidetracks due to MD 3 Tab
792937 Comp Group picklist is blank on Well- PROFILE 5000.1.2.0 Well Designer
heads Tab - PROFILE
793123 Enhancement - Make Section, Township, 5000.1.0.0 Wall Plot Data Box
and Range available in PROFILE Composer Object
793169 Top of cement not correctly showing in 2003.16.1. Well Designer Interactive
track for 9 5/8" intermediate casing 12 Schematic
797107 Font coloring is not preserved with tem- 2003.16.1. Templates/
plate 14 Frames
797605 When you attempt to create or load a 5000.1.2.0 Wall Plot General Wall
workspace prior to setting the workspace Composer Plot Com-
folder you do not get a message and poser Func-
nothing happens. tionality

Release 5000.1.1

There were no PROFILE issues fixed for this release.

5000.1.13 Page 266 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.0

The following problems were either fixed or have workarounds for the 5000.1 release.

Defect No. Description

728578 Performance issue - Lesson Properties
722519 Event Objective 2 in Well Explorer Event Properties dialog box is empty
772396 Can not hide the Wall Plot Composer toolbar, deselecting the Wall Plot Composer
toolbar option from View menu is not hiding the WallPlot Composer toolbar and it is
hiding the Schematic Options toolbar.

783711 Easting value is displaying wrong and Longitude value is not displaying in PROFILE,
Well Properties
730571 Blank Datum Elevation Record
771642 Clone of 762750 -PROFILE, custom SI catalogs, column sorting is messed up
783365 Survey data inconsistent between PROFILE and COMPASS applications
758680 Need to be able to copy and paste components between assemblies
770533 Licensing - EDT software Licensing does not take advantage of the functionality that
will warn users that their license is set to expire in x days
759703 PROFILE software connects Umbilicals to wrong components if Components have
same Item Description; hooking up to Item Description Name and not Id
772693 Output Report preview list on Date Bar displays the incorrect report name
741064 Symbol Map - need to introduce application security token to control access. Most
users will not be customizing Symbol Maps.
723768 Drawings are distorted if repeat symbols have not been defined. Message in Data
Quality window would help with finding this problem.
731492 PROFILE software should report max dogleg, inclination and azimuth in a data box
702512 CD_CEMENT_FLUID data should be available in PROFILE as a track or data box.
731482 Well Status should be available as a data box in PROFILE template
759376 Unable to see data on a custom template for Wellhead data.
758116 Need ability to sort Component Order on Wellbore Equipment Details, Wellhead
Equipment, Casing Assembly Details tables
758114 Unable to remove Time portion of Date/Time Value
758346 Need Cement Slurry Date available in Cementing Databox.
758117 Need Zone, Reservoir and Formation supported in Perforation Intervals data box
777246 Filter out cement that has been drilled out in the cement intervals track
782033 PROFILE software out of memory and poor performance when wellbore openings
overlap

5000.1.13 Page 267 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

780801 Add TVD Current, Sacks Used, Cement Grade to Data Box
764202 Need support for Mud Program data box in WPC
759908 With large number of Wellbore EQs and with the new Split Section feature, opening a
WPC shows the entire Completion assembly instead of X out of Y
771371 WPC tab, Tool Tip text is not displaying for buttons in Schematic Object Properties
dialog box.
741749 Need Wellbore Details data table for multi-lateral summary for the Well
740702 OpenWells data missing from PROFILE Data Box & Tracks
742868 Material value in Component Properties not available under Wellbore Equipment
Details
742444 Font scaling problems in wall plots
731557 Need a selection criteria to select only specific items into data boxes e.g. Reference
Datum Boxes
728751 PROFILE software must show wellbore formations and wellbore zones from the per-
foration report
732997 Need to be able to specify decimal precision on numeric fields on tracks and data
boxes.
732920 Need ability to group PPC pages into a Template
716527 Component TVDs & Inc not available in WPC Wellbore Equip Assembly Component
Details data box
700055 Need to add support for outputting current date/time to WPC formats
622114 Need WPC data box support for the Well Remarks table
746220 Lithology wont show up unless both top and bottom depth information is entered.
700054 Need the ability to differentiate planned & actual Formations/Lithologies
726272 Need support for completion sub-assemblies
701000 Sub-Assembly Support: need ability to copy other assembly in Design into current
assembly (merge).
755077 Enhance support for Stimulations data
755075 Enhance support for Wellbore Openings
755492 Need to hook Help ID to Assembly Status dialog box topic
755541 Tabs displaying skewed on data box in WPC
758347 WPC Perforations Data Box - Cannot access header fields in master detail
729939 PROFILE software does not handle Depth Correction in Interactive Schematic and
WPC for Casing and Wellbore Equipment's
755062 Support additional Assembly Component fields

5000.1.13 Page 268 of 283 July 2014

 OpenWells Software Release Notes

Defect No. Description

751023 Need to segregate Formations by Design
746229 Want to be able to select either prognosed depths or actual depths
749109 Catalog selection windows should be re-sizable
746240 Add the caption label to the tracks listed in the schematic track properties.
743429 Extend PROFILE Actual Design Support to create Report Headers
749109 Catalog selection windows should be re-sizable
746240 Add the caption label to the tracks listed in the schematic track properties.
752498 Umbilicals Component Selection Picklist should show MD Top of each Tool listed for
better differentiation

5000.1.13 Page 269 of 283 July 2014

 OpenWells Software Release Notes

PROFILE Known Issues

The following PROFILE known issues for releases 5000.1.0 through 5000.1.13.0 are
described below.

Release 5000.1.13

The following were the PROFILE known issues for the 5000.1.13.0 release.

Defect No. Description

942247 Opening the Catalog Editor from the Well Explorer tree results in an error message
This issue only affects the Profile when installed using the OpenWells Standalone
install, it does not affect Profile when installed using the EDT installer.

Release 5000.1.12

There were no additional PROFILE known issues for this release.

Release 5000.1.11

There were no additional PROFILE known issues for this release.

Release 5000.1.9

The following are PROFILE known issues for the 5000.1.9 release.

Defect No. Description

853373 Company properties lock check box not grayed out when SAM is locking the Com-
pany.

854741 Wall Plot Composer - Displaying wrong Depth and Symbol for original holes and
sidetracks

855229 SP#232 Completion Assembly drawn past bottom of Wellbore

856464 PROFILE Schematic not drawing well with Mixed Units of lengths in meters and
diameters in inches.

859895 Historian - PROFILE - Creating an instant design and then approving the well dis-
play wrong information

5000.1.13 Page 270 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.8

There were no additional PROFILE known issues for this release.

Release 5000.1.7

There were no additional PROFILE known issues for this release.

Release 5000.1.6

There were no additional PROFILE known issues for this release.

Release 5000.1.5

There were no additional PROFILE known issues for this release.

Release 5000.1.4

There were no additional PROFILE known issues for this release.

Release 5000.1.3

There were no additional PROFILE known issues for this release.

Release 5000.1.2

There were no additional PROFILE known issues for this release.

Release 5000.1.1

There were no additional PROFILE known issues for this release.

5000.1.13 Page 271 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.0

The following are PROFILE known issues for the 5000.1 release.

Defect No. Description

744204 Need support for recording and rendering cellar geometry and schematics for land
wells
750149 Need a comment field for Umbilicals and Jewelry
746244 Long casing components only stretch when the number of joints is 0 or Null.
741740 Need drag-and-drop support for copy/paste of Wellheads between Designs
741741 Perf Status display issue when you have overlapping Perfs
741065 Wellbore Equipment Depths Track should support interpolated inclination and other
directional parameters
741737 Need electronic import support for Surveys
744201 Need WPC template that fits all printers
741750 need spreadsheet import feature same as OpenWells software for Wellbore Equip-
ment
742088 PROFILE spreadsheets don't support keyboard Delete button or right-click Delete
menu item
781413 Attachments can not Open/Delete/Save As from the Date bar Attachments dialog
box if we minimize the ADV.
781410 PROFILE software: Virtual Folder attachments are opened blank.
781521 We can add new Wellbores in PROFILE using Insert key after Revoking 'EDM.Well-
bore.add' token also.
776624 OpenWells software vs PROFILE software: ADV, Right click menu item 'Save As' is
always disabled for attachments.
774962 Accessing Properties for the Database node by shortcut key (Alt+Enter) is not work-
ing.
778456 change the label "locked" on the Event properties to be consistent with other levels
783972 Launching Help from Sub Assembly button doesn't work properly
783531 PROFILE software, Symbol Manager, Sketch Mode, disable the Options item in View
menu. Currently it is enabled and selecting Options is not showing Options dialog
box.
782062 Cannot copy a subassembly from one design to another
781965 Drag-and-drop vs. Spreadsheet - Deleting rows.
781972 PROFILE software, Hole section, data is not updating properly once it gets dirty with
bad data

5000.1.13 Page 272 of 283 July 2014

 OpenWells Software Release Notes

Data Analyzer Software

Enhancements Fixed Issues Known Issues

The 5000.1.13.0 release adds new and drops some existing supported platforms, plus
adds enhancements, fixes, and known issues from the 5000.1.0 and subsequent EDT
releases. There are no changes to the Data Analyzer software for the 5000.1.13.0
release.

Data Analyzer Enhancements and New Functionality

The Data Analyzer enhancements and new functionality for releases 5000.1.0 through
5000.1.13.0 are described below.

Release 5000.1.13

There are no enhancements to Data Analyzer for this release.

Release 5000.1.4 through 5000.1.12.0

Support for a variety of new tables and fields added during the development of EDT
software were added to Data Analyzer software for these releases.

Release 5000.1.3

New platforms are supported.

Release 5000.1.2

There were no enhancements to Data Analyzer for this release.

Release 5000.1.1

WELLCAT was added to the EDT suite of applications for the first time in the 5000.1.1
release. Also, some Common Well Explorer enhancements were made. (See EDT
Software for details). This update release improves the import/export and sharing of
Grades, Pipes/Connections between StressCheck and WELLCAT, improves the
integration between StressCheck and WELLCAT, and repairs critical defects affecting

5000.1.13 Page 273 of 283 July 2014

 OpenWells Software Release Notes

key StressCheck and WELLCAT application functions. There were no additional

enhancements for the Data Analyzer software.

Release 5000.1.0

The 5000.1.0 release of Engineers Desktop supports the Microsoft Vista operating
system, has new LAM (FLEXnet Publisher) licensing and contains some critical bug
fixes. Well Cost was added to the EDT suite of applications for the first time in this
release. For the Data Analyzer application, the following enhancement was made:

Find in Tree Feature: User now has the ability to run a text search against the Selection
Tree. When performing a search of the Selection Tree, you must enter text that is
applicable to the currently selected Tree View.

5000.1.13 Page 274 of 283 July 2014

 OpenWells Software Release Notes

Data Analyzer Fixed Issues

The Data Analyzer issues fixed for 5000.1.0 through 5000.1.13.0 are described below.

Release 5000.1.13

There are no Data Analyzer issues fixed for this release.

Release 5000.1.12

There were no Data Analyzer issues fixed for this release.

Release 5000.1.11

The following issues were fixed for the 5000.1.11.0 release of Data Analyzer software.

Defect No. Description

854232 Add functionality to record comments in Data Analyzer for each data element

863049 Expression Builder changes capitalization around periods in name and returns no
result from SQL

893688 Data Analyzer - Main application tabs display Cyrillic symbols wrong

900441 Data Analyzer Templates Launch Excel changes date format from dd/mm/yyyy to
mm/dd/yyyy for those dates where dd < 13, resulting in a mixture of date formats with
the excel output.

Release 5000.1.10

There were no Data Analyzer issues fixed for this release.

Release 5000.1.9

The following Data Analyzer defects were fixed in the 5000.1.7.1 patch and ported to
the 5000.1.9 release.

Defect No. Description

839070 Ability to save changes to another user's query

840787 Data Analyzer unit selection drop down is not wide enough to show all characters

5000.1.13 Page 275 of 283 July 2014

 OpenWells Software Release Notes

Release 5000.1.3 through 5000.1.8

There were no Data Analyzer issues fixed for these releases.

Release 5000.1.2

For the 5000.1.2 release, the following Data Analyzer fix was done.

Defect Description Comp Level 1 Comp Level 2

No.
727822 Users need to be able to change Query Time- Core App
out value (reported in 2003.14.1.0).

Release 5000.1.1

There were no Data Analyzer issues fixed for this release.

Release 5000.1.0

The following Data Analyzer issues were either fixed or have workarounds for the
5000.1.0 release.

Defect Description Comp Level 1 Comp Level 2

No.
736669 Find Function on Data Analyzer Selection Tree Selection Tree
746136 Add Stimulation Flow Backs to "DA/DV Well Selection Tree Tree View
Explorer mode" tree
763839 Data Analyzer EDM help refers repeatedly to Help/ Online Help
DIMS Documentation
770529 Licensing - EDT Licensing does not take Licensing
advantage of the functionality that will warn
users that their license is set to expire in x days
771959 Data Analyzer Graph wizard dies not recognize Graphics Graph Wizard
derived or grouped numeric fields as numeric.
775701 Table linkage between Core App
DM_OPER_EQUIP_FAIL and DM_ACTIVITY is
wrong.
776401 Update the Data Analyzer Metadata for Hole Selection Tree
Plan section in the Well Planning Report

5000.1.13 Page 276 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Comp Level 1 Comp Level 2

No.
776936 Update Data Analyzer for the new fields added Selection Tree
to the Daily Operation Report's general section.
782756 Data Analyzer Selection Tree - Closing a query Selection Tree
before closing the Tree Find dialog box can
cause DA to shut down.

5000.1.13 Page 277 of 283 July 2014

 OpenWells Software Release Notes

Data Analyzer Known Issues

The following Data Analyzer known issues for releases 5000.1.0 through 5000.1.13.0 are
described below.

Release 5000.1.1 through 5000.1.13

There were no additional Data Analyzer known issues for these releases.

Release 5000.1.0

The following Data Analyzer known issues were reported for the 5000.1.0 release.

Defect Description Comp Level 1 Comp Level 2

No.
772574 Need "find" function in Open query windows Query

782031 Waste Management Tree in Hierarchy should Selection Tree Tree View
show the recycling icon used in the OpenWells
783193 Graph Wizard - Just walking through all the Graphics Graph Wizard
steps enables the Save button even though no
762100 OpenWells stimulation report copied from Query Filter
library is not displaying in Data Analyzer
764319 Data Analyzer - User request ability to break/ Query
stop large query process
771228 2nd (NPT free) line in TvD graph Graphics Graph Properties

761014 User option under OPTIONS in Data Analyzer Core App

to allow the user to re-map the excel path if the
720335 Data Analyzer should record and display the Core App
creation and modification date of a query along
727464 Need a token to allow user to save DA queries Core App
as iWellfile queries.
727637 Request change to the links between the rig Query Key Joins
and the well information.
178704 Need multi-graph print option to print all graphs Graphics

757262 User wants to add the company logo to the Printing Print Setup
query reports created with Data Analyzer.
730479 Graphs in iWellFile have different graphs than iDIMS Query
are configured in Data Analyzer

5000.1.13 Page 278 of 283 July 2014

 OpenWells Software Release Notes

Defect Description Comp Level 1 Comp Level 2

No.
733889 IWellFile not showing Date/Time only Date for Query Results
Spud Date and Update Date. Spreadsheet

5000.1.13 Page 279 of 283 July 2014

 OpenWells Software Release Notes

Contacting Landmark Customer Support

Landmark Customer Support operates Technical Assistance Centers (TACs) in Malaysia,
the United Kingdom, and the United States. Customer Support provides technical
assistance on Landmark software applications. The website for Landmark is:

Landmark (http://www.landmarksoftware.com)

Requests for support can be made by:

Landmark Customer Support Portal

See Submitting a Request for Technical Assistance below.

Email

[email protected]

Telephone

See Technical Assistance Centers below.

Submitting a Request for Technical Assistance

To submit a request for technical assistance:

1. Open Landmark Customer Support Portal (http://www.landmarksoftware.com/Pages/

Support.aspx) in a browser.

2. Hover the mouse cursor over the Sign In To Landmark Portals area on the right of
the webpage. Text boxes for your registered email account and password appear.

3. Log in. The Sign In To Landmark Portals area is renamed to Landmark Portals.

4. In the Landmark Portals area, select Customer Support Portal. The Support Portal
Home page appears in the browser.

5. In the Case & Defect Information area on the right, select Create A New Case. The
Add Case page appears in the browser.

6. Fill in the requested information.

Provide:

Details about your technical concern, including any error messages.

5000.1.13 Page 280 of 283 July 2014

 OpenWells Software Release Notes

Workflow steps where the problem occurred.

Attachments of screen shots that capture the problem.

7. Click Submit.

A support analyst in the nearest Technical Assistance Center will respond to your
request.

Technical Assistance Centers

The hours of operation are:

8:00 a.m. - 5:00 p.m., local time

Monday-Friday, excluding holidays

The phone numbers for the Technical Assistance Centers are:

Asia Pacific, Malaysia

+61-8-9481-4488

Toll Free +1-800-803-687 (Malaysia)

Europe, Africa, Middle East, Eurasia, United Kingdom

+44-1372-868686

Latin America, USA

+1-713-839-3405 (Spanish, Portuguese, English)

North America, USA

+1-713-839-2200 (Houston, TX, USA)

Toll Free +1-877-435-7542

For more information about contacting Customer Support, see:

http://www.landmarksoftware.com/Pages/ContactSupport.aspx

5000.1.13 Page 281 of 283 July 2014

 OpenWells Software Release Notes

2014 Halliburton
All Rights Reserved

This publication has been provided pursuant to an agreement containing restrictions on its use. The publication is also protected by
Federal copyright law. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system,
or translated into any human or computer language, in any form or by any means, electronic, magnetic, manual, or otherwise, or
disclosed to third parties without the express written permission of:

Halliburton | Landmark Software & Services

2107 CityWest Blvd, Building 2, Houston, Texas 77042-3051, USA
P.O. Box 42806, Houston, Texas 77242, USA
Phone:713-839-2000, FAX: 713-839-2015
Internet: https://www.landmarksoftware.com

Trademarks
3D Drill View, 3D Drill View KM, 3D Surveillance, 3DFS, 3DView, Active Field Surveillance, Active Reservoir Surveillance, Adaptive Mesh Refining, ADC,
Advanced Data Transfer, Analysis Model Layering, ARIES, ARIES DecisionSuite, Asset Data Mining, Asset Decision Solutions, Asset Development Center,
Asset Development Centre, Asset Journal, Asset Performance, AssetConnect, AssetConnect Enterprise, AssetConnect Enterprise Express, AssetConnect
Expert, AssetDirector, AssetJournal, AssetLink, AssetLink Advisor, AssetLink Director, AssetLink Observer, AssetObserver, AssetObserver Advisor,
AssetOptimizer, AssetPlanner, AssetPredictor, AssetSolver, AssetSolver Online, AssetView, AssetView 2D, AssetView 3D, Barrier Assurance Monitoring,
BLITZPAK, CartoSnap, CasingLife, CasingSeat, CDS Connect, CGMage Builder, Channel Trim, COMPASS, Contract Generation, Corporate Data Archiver,
Corporate Data Store, Data Analyzer, DataManager, DataServer, DataStar, DataVera, DBPlot, Decision Management System, DecisionSpace, DecisionSpace
3D Drill View, DecisionSpace 3D Drill View KM, DecisionSpace AssetLink, DecisionSpace AssetPlanner, DecisionSpace AssetSolver, DecisionSpace
Atomic Meshing, DecisionSpace Base Module, DecisionSpace Data Quality, DecisionSpace Desktop, DecisionSpace Dropsite, DecisionSpace Geosciences,
DecisionSpace GIS Module, DecisionSpace GRC Module, DecisionSpace Nexus, DecisionSpace Reservoir, DecisionSuite, Deeper Knowledge. Broader
Understanding., Depth Team, Depth Team Explorer, Depth Team Express, Depth Team Extreme, Depth Team Interpreter, DepthTeam, DepthTeam Explorer,
DepthTeam Express, DepthTeam Extreme, DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery
3D, Discovery Asset, Discovery Framebuilder, Discovery PowerStation, Discovery Suite, DMS, Drillability Suite, Drilling Desktop, DrillModel, DrillNET,
Drill-to-the-Earth-Model, Drillworks, Drillworks ConnectML, Drillworks Predict, DSS, Dynamic Frameworks to Fill, Dynamic Reservoir Management,
Dynamic Surveillance System, EDM, EDM AutoSync, EDT, eLandmark, Engineers Data Model, Engineers Desktop, Engineers Link, ENGINEERING
NOTES, eNotes, ESP, Event Similarity Prediction, ezFault, ezModel, ezSurface, ezTracker, ezTracker2D, ezValidator, FastTrack, Field Scenario Planner,
FieldPlan, For Production, FrameBuilder, Frameworks to Fill, FZAP!, GeoAtlas, GeoDataLoad, GeoGraphix, GeoGraphix Exploration System, Geologic
Interpretation Component, Geometric Kernel, GeoProbe, GeoProbe GF DataServer, GeoSmith, GES, GES97, GesFull, GESXplorer, GMAplus, GMI Imager,
Grid3D, GRIDGENR, H. Clean, Handheld Field Operator, HHFO, High Science Simplified, Horizon Generation, I2 Enterprise, iDIMS, iEnergy,
Infrastructure, iNotes, Iso Core, IsoMap, iWellFile, KnowledgeSource, Landmark (as service), Landmark (as software), Landmark Decision Center,
LandNetX, Landscape, Large Model, Lattix, LeaseMap, Limits, LithoTect, LogEdit, LogM, LogPrep, MagicDesk, Make Great Decisions, MathPack, MDS
Connect, MicroTopology, MIMIC, MIMIC+, Model Builder, NETool, Nexus (as service), Nexus (as software), Nexus View, Object MP, OneCall, OpenBooks,
OpenJournal, OpenLink, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWire Client, OpenWire Server, OpenWorks, OpenWorks Development Kit,
OpenWorks Production, OpenWorks Well File, Operations Management Suite, PAL, Parallel-VIP, Parametric Modeling, Permedia, Petris WINDS Enterprise,
PetrisWINDS, PetroBank, PetroBank Explorer, PetroBank Master Data Store, PetroWorks, PetroWorks Asset, PetroWorks Pro, PetroWorks ULTRA, PLOT
EXPRESS, PlotView, Point Gridding Plus, Pointing Dispatcher, PostStack, PostStack ESP, PostStack Family, Power Interpretation, PowerCalculator,
PowerExplorer, PowerExplorer Connect, PowerGrid, PowerHub, PowerModel, PowerView, PrecisionTarget, Presgraf, PressWorks, PRIZM, Production,
Production Asset Manager, PROFILE, Project Administrator, ProMAGIC Connect, ProMAGIC Server, ProMAX, ProMAX 2D, ProMax 3D, ProMAX
3DPSDM, ProMAX 4D, ProMAX Family, ProMAX MVA, ProMAX VSP, pSTAx, Query Builder, Quick, Quick+, QUICKDIF, Quickwell, Quickwell+,
Quiklog, QUIKRAY, QUIKSHOT, QUIKVSP, RAVE, RAYMAP, RAYMAP+, Real Freedom, Real Time Asset Management Center, Real Time Decision
Center, Real Time Operations Center, Real Time Production Surveillance, Real Time Surveillance, Real-time View, Recall, Reference Data Manager,
Reservoir, Reservoir Framework Builder, RESev, ResMap, Resolve, RTOC, SCAN, SeisCube, SeisMap, SeisMapX, Seismic Data Check, SeisModel,
SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks PowerCalculator, SeisWorks PowerJournal, SeisWorks PowerSection, SeisWorks PowerView,
SeisWorks2D, SeisWorks3D, SeisXchange, Semblance Computation and Analysis, Sierra Family, SigmaView, SimConnect, SimConvert, SimDataStudio,
SimResults, SimResults+, SimResults+3D, SIVA+, SLAM, Smart Change, Smart Deploy, Smart Flow, Smart Skills, Smart Start, Smart Sustain, Smart
Transform, Smart Vision, SmartFlow, smartSECTION, smartSTRAT, Spatializer, SpecDecomp, StrataMap, StrataModel, StratAmp, StrataSim, StratWorks,
StratWorks 3D, StreamCalc, StressCheck, STRUCT, Structure Cube, Surf & Connect, SurfNet, SynTool, System Start for Servers, SystemStart, SystemStart
for Clients, SystemStart for Servers, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, T-Grid, The Engineers DeskTop, Total
Drilling Performance, TOW/cs, TOW/cs Revenue Interface, TracPlanner, TracPlanner Xpress, Trend Form Gridding, Trimmed Grid, Tubular Basic, Turbo
Synthetics, Unconventional Essentials, VESPA, VESPA+, VIP, VIP-COMP, VIP-CORE, VIPDataStudio, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE,
VIP-Local Grid Refinement, VIP-THERM, vSpace, vSpace Blueprint, vSpace Onsite, WavX, Web Editor, Well H. Clean, Well Seismic Fusion, Wellbase,
Wellbore Planner, Wellbore Planner Connect, WELLCAT, WELLPLAN, WellSolver, WellXchange, WOW, Xsection, Youre in Control. Experience the
difference., ZAP!, ZEH, ZEH Plot, ZetaAnalytics, Z-MAP, Z-MAP Plus, and ZPS are trademarks, registered trademarks, or service marks of Halliburton.

All other trademarks, service marks and product or service names are the trademarks or names of their respective owners.

Note
The information contained in this document is subject to change without notice and should not be construed as a commitment by
Halliburton. Halliburton assumes no responsibility for any error that may appear in this manual. Some states or jurisdictions do not
allow disclaimer of expressed or implied warranties in certain transactions; therefore, this statement may not apply to you.

5000.1.13 Page 282 of 283 July 2014

 OpenWells Software Release Notes

Third Party Licenses and Attributions

Halliburton acknowledges that certain third party code has been bundled with, or embedded in, its software. The licensors of this
third party code, and the terms and conditions of their respective licenses, may be found at the following location:

[Installdir]\Documentation\Third_Party.pdf
Disclaimer
The programs and documentation may provide links to external web sites and access to content, products, and services from third
parties. Halliburton is not responsible for the availability of, or any content provided on, third party web sites. You bear all risks
associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is
directly between you and the third party. Halliburton is not responsible for: (a) the quality of third party products or services; or (b)
fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations
related to purchased products or services. Halliburton is not responsible for any loss or damage of any sort that you may incur from
dealing with any third party.

5000.1.13 Page 283 of 283 July 2014