Compressor type

L220, L270, L350

Structural features:
Three staged cylinders in 90 V-arrangement, with two-
throw crankshaft, single acting trunk pistons
1st stage: 2 cylinders
2nd stage: 1 cylinder
3rd stage: 1 cylinder

Valves:
Combined suction and pressure valves in all stages

Air cooling:
By axial fan directly driven by the crankshaft

Intercooler and aftercooler:

Block type

Force feed lubrication:

Gear pump driven by the crankshaft by means of gear wheels
Oil pressure control by means of pressure gauge and
pressure switch
Oil level inspection glass
Crankcase venting from oil filler to air suction filter
Oil filtration by external, exchangeable oil filter insert

Bearings:
Crankshaft: Slide bearings
Connecting rod: Slide bearings
Wrist pin: Needle bearings
Compressor type
L220, L270, L350
A B

C
TYPE Cylinders Stages Speed F.A.D. Power Weight incl. e-motor Dimensions
r.p.m. m/h kW approx. kg A B C
1150 169 31 1000 1954 900 1000
L220 4 3 1450 214 41 1000 1954 900 1000
1750 259 52.5 1000 1954 900 1000
1150 205 37 1000 2005 900 1000
L270 4 3 1450 256 49.5 1000 2005 900 1000
1750 301 63.5 1000 2005 900 1000
1150 271 49.5 1300 2122 900 1000
L350 4 3 1450 338 63 1300 2122 900 1000
1750 411 84 1300 2122 900 1000
All data apply to a final pressure of 30 bar. The right for alteration of specification
and data to incorporate improvements in design is reserved.

Motor 1 F.A.D.
2 1
Flywheel and coupling 2
M

Solenoid valve for draining 3

2.stage

3.stage
1.stage

Non-return valve 4
AIR RECEIVER

6 6 4
7
Pressure switch 5
drain

drain

drain

5
Oil and water separator 6
3 3 3
Flexible hoses 7
Version: 04/2000

7 7 7