Scribd
Upload
55 views9 pages

Qinst en TPNP Vstarcam

This document provides quick installation instructions for the Pangolin T Series IP camera in 4 sections: 1) Hardware installation - Connect the camera to a router with an Ethernet cable and power it on, checking that the power and network lights turn on. Use the provided power adapter. Press the reset button for 10 seconds to reset to defaults. 2) Android app installation - Download and install the app, scan the camera's QR code to add it, and enter the default password of 888888 to view live video. 3) iPhone app installation - Download and install the P2PCam264 app, scan the camera's UID to add it, and view live video. 4) PC

Uploaded by

dafralco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views9 pages

Qinst en TPNP Vstarcam

This document provides quick installation instructions for the Pangolin T Series IP camera in 4 sections: 1) Hardware installation - Connect the camera to a router with an Ethernet cable and power it on, checking that the power and network lights turn on. Use the provided power adapter. Press the reset button for 10 seconds to reset to defaults. 2) Android app installation - Download and install the app, scan the camera's QR code to add it, and enter the default password of 888888 to view live video. 3) iPhone app installation - Download and install the P2PCam264 app, scan the camera's UID to add it, and view live video. 4) PC

Uploaded by

dafralco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Pangolin T Series IP Camera

Quick Installation Guide For Pangolin T Series

Hardware Installation
Firstly, Power the IP-Camera, and use a net-wire to wire IP-Camera and Router. Check if the Power
light(yellow) and network light(green) are on.If not, check the net-wire and power supply.

Note:Please use power supply adapter provided by Vstarcam to prevent harming the
IP-Camera.

Note:If want to reset a IP-Camera to defaut settings,please keep pressing the RESET button located on the
bottom of a IP-Camera for 10 seconds.

Android mobile client


1. Install Client access http://cd.gocam.so on Mobile Browser to download Client or just use QR code to
download.
2. When finish installing plug&play client,there will be a icon displayed in the desktop.

3. Run the VsCam,then add new camera


4. Press "Scan" to add Camera

Use mobile to scan QR code(can be seen on the bottom on the IP camera or printed on the label). When
mobile scans the code successfully, there will be a string displayed on the Textbox.
Press "Search"button,then mobile will automatically search IP cameras located in the LAN.
Input the IP camera's password, the default one is : 888888

5. Watch video: Click the label, then you can view the video.
View via iPhone
1. Install the P2PCam264 softwareaccess this http://cd.gocam.so via the phone web browser, and follow the instruction t
download or scan the QR code to download the PnP version software.

2. "VsCam" will be shown on the phone desktop after success installation.


3.Run the software and click Add to add cameras

4. Click Scan, then scan the camera's UID.


Point iPhone camera towards the UID (The UID can be found on the bottom of the IP camera or the
warranty card). After a beep sound, the UID is scanned successfully. Also you can click search to add
cameras in the LAN, or manually" Add camera", to input the camera's UID and password. The default password
is blank.

5. Click "camera" to view the live video.

Notes:
1.If the device has Pan/Tilt function, users can slide up and down on the video screen to control the camera P/T.

Usage of PC client
1.You can get a PC client from the disk or download from http://cd.gocam.so

When finish inistalling PC client, there will be a icon displayed on desktop.

2.add new IP-Camera


To add a Camera located in LAN, press "Find" button,then choose a Camera from the display list.You can
also add a Camera through inputting UID.(UID is printed on the label or wirtten on the bottom of a Camera)the
default password is : 888888.

3. Press "OK" button to finish adding a Camera.


press "Set WIFI",to set a Camera to wirelessly connect to Router.

5. Double click a Camera's lable on the right side, then can view video from camera.

You might also like