Scribd
Upload
2K views

Maintenance Chart

This document provides a maintenance schedule for various tasks to be completed on a periodic basis. The schedule outlines daily, weekly, monthly, quarterly, semi-annually, and as-indicated maintenance tasks such as checking fluid levels, greasing parts, filtering fluids, inspecting for damage and leaks, and changing fluids and filters. It recommends referring to the unit's owner's manual for specific maintenance requirements.

Uploaded by

Mohamed Rashed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Maintenance Chart

This document provides a maintenance schedule for various tasks to be completed on a periodic basis. The schedule outlines daily, weekly, monthly, quarterly, semi-annually, and as-indicated maintenance tasks such as checking fluid levels, greasing parts, filtering fluids, inspecting for damage and leaks, and changing fluids and filters. It recommends referring to the unit's owner's manual for specific maintenance requirements.

Uploaded by

Mohamed Rashed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Preventative Maintenance This is only a generic sample of a maintenance chart.

Please refer to your O/M manual for your specific


units break-in period.
The table below lists the normal recommended
maintenance schedules (after the break-in period). A
description of each maintenance task is on the pages of
this manual listed in the page number column.

Scheduled Maintenance

Semi-annually

As Indicated
Quarterly

Annually
Monthly
Weekly
Daily
Task

Change main hydraulic oil filter


Change high pressure oil filter
Change water system inline filter
Check truck fluid levels
Bleed moisture from air tank
Check tires
Check hydraulic oil
Bleed moisture from hydraulic tank
Check differential cylinder rod packings
Inspect bolts on Rock Valve and rams
Grease Rock Valve and agitator bearings
Grease Rollix bearing and hollow pin
Check optional auto greaser reservoir
Fill optional auto greaser reservoir
Inspect for damage and leaks
Check if maintenance is due
Grease boom zerks
Check pipe wall thickness
Check oil in optional air compressor
Check Rock Valve tension nut

142 Training Manual


Scheduled Maintenance (Continued)

Semi-annually

As Indicated
Quarterly

Annually
Monthly
Weekly
Daily
Task

Inspect cutting ring/rotate if needed


Lubricate mechanical moving parts
Check tapered bend wedge bolt
Check boom slewing gearcase oil level
Clean slewing gearcase breather cap
Check function of mech. boom brake
Clean and repack the Rollix gear
Inspect the turret bolts for tightness
Check fluid in distribution gearcase
Check unit mounting hardware
Check hydraulic pressures
Clean hydraulic oil cooler fins
Check drive pinion mounting screw
Change oil in optional compressor
Change hydraulic oil for temp. reasons
Check the accumulator pre-charge a a
Change oil in distribution gearcase
Change oil in boom slewing gearcase
Test dirty filter lamp circuit
Change hydraulic oil for age reasons
Clean optional compressor
Change corrosion inhibitors
Periodic - structural inspection
a.

Training Manual 143

You might also like