Scribd
Upload
255 views1 page

Pulley Calculations Data Sheet

This document contains calculations for selecting a Conti-V multi-rib V-ribbed belt for a VMC design project between April and May 2015. It specifies a 9 belt configuration using Conti-V MULTIRIB STANDARD belts with an effective length of 813mm to transmit 7.5kW of power between a small pulley of 71mm diameter and a large pulley of 112mm diameter, running at 2000rpm and 1286.96rpm respectively. The calculated service life of the belt system is 24562 hours.

Uploaded by

azharscar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views1 page

Pulley Calculations Data Sheet

This document contains calculations for selecting a Conti-V multi-rib V-ribbed belt for a VMC design project between April and May 2015. It specifies a 9 belt configuration using Conti-V MULTIRIB STANDARD belts with an effective length of 813mm to transmit 7.5kW of power between a small pulley of 71mm diameter and a large pulley of 112mm diameter, running at 2000rpm and 1286.96rpm respectively. The calculated service life of the belt system is 24562 hours.

Uploaded by

azharscar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

V-ribbed belt calculatrion 5/12/2015 Version 7.

To From
Company: IMTMA Company: P
Fao: AQ Responsible: azhar
Application: VMC Design Project Telephone: 123124124
Remarks: April - May 2015 Fax: 124131
____________________________________________________________________________________

Conti CONTI-V MULTIRIB STANDARD

Section PROF = PK
Effective diameter of small pulley DBK = 71,00 mm
Pitch diameter of small pulley DWK = 74,00 mm
Effective diameter of large pulley DBG = 112,00 mm
Pitch diameter of large pulley DWG = 115,00 mm
Speed of small pulley NK = 2000,00 rpm
Speed of large pulley NG = 1286,96 rpm
Transmission ratio I = 1,55
Belt effective length LBER = 813,00 mm
Calculated centre distance AER = 261,97 mm
Arc of contact BETA = 171,02 grd
Positive centre adjustment for tensioning X + 6,52 mm
Negative centre adjustment for fitting Y - 8,57 mm
Belt speed V = 7,75 m/s
Belt flex frequency FB = 18,84 Hz
Power to be transmitted P = 7,50 kW
Torque on small pulley MDK = 35,81 Nm
Torque on large pulley MDG = 55,65 Nm
Given service factor C2 = 1,30
Arc of contact factor C1 = 0,98
Belt length correction factor C3 = 0,86
Power rating per belt PR = 1,28 kW
Calculated number of V-belts Zer = 9,02
Chosen number of V-belts Z = 9
Calculated overall service factor C2ER = 1,30
Min. pulley face width as per DIN B2 = 33,48 mm
Belt tension factor K1 = 1,55
Effective pull FU = 967,83 N
Static tension per belt F = 763,04 N
Total axle load FV = 1521,40 N
Dynamic axle load FDYN = 1498,77 N
Test force per belt FE = 135,00 N
Test deflection TE = 9,30 mm
Natural frequency of belt span EIF = 128 Hz
Service life LH = 24562 h

____________________________________________________________________________________
CONTI-V MULTIRIB V-ribbed belt - 9 * PK 813 - Lb STANDARD
Small pulley P 9 - PK - 71,00
Large pulley P 9 - PK - 112,00
____________________________________________________________________________________
All orders are subject exclusivley to our General Conditions of Business

You might also like