English

LG Electronics
BLUETOOTH ® Mono Headset
HBM-220 User manual

All rights reserved.

LG Electronics Inc., 2009

Note: For optimal performance and to prevent

any damage to, or misuse of the HBM-220,
please read all the information carefully
before using the HBM-220.

Any modifications or changes to this manual due to

typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
 Table of Contents Introduction

Introduction 3
Description of parts 4 The LG Bluetooth® Headset HBM-220 is a lightweight wireless
How to use 4 headset that uses Bluetooth® technology.
- Change direction 4 This product can be used as an audio accessory for devices that
- Charging 5 support the headset or handsfree Bluetooth® profiles.
- Low battery 5
- Power on 5
- Power off 5 Included in the package
- Pairing 5
�Easy pairing 5
�Manual pairing 6
- Auto reconnect 7
- Volume control 7
- Calling 7
�Answering a call 7
�Making a call 7
�Voice-dialling 8
�Last number redial 8
�Ending a call 8
Bluetooth® Headset User manual
�Transferring a call 8
�Call waiting 8
�Call reject 8
Summary of button functions 9
LED indication 9
Troubleshooting 10
Specification 10
Precautions 11
Declaration of confirmation 13
Additional information 13 Charger WEEE Card
Limited warranty 16
Important safety information 16
2 3
 Description of parts How to use

Front Charging
- Remove the cover on the charging port and connect the charger.
Charging Port - When the charger is connected, with power on or off, the Headset
MFB will turn off.
(Multi-Function Button) - While charging, the LED indicator will show a solid blue light.
Ear Loop - The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.

Back Low battery

- A low battery tone will sound once every 30 seconds.
- If the battery is not charged, the headset will turn off.

Power on
Speaker
- Press and hold the MFB for 5 seconds.
Volume UP /
�The power will turn on and a startup tone will sound.
Down Button
Mic Power off

- Press and hold the MFB for 5 seconds.

�A shutdown tone will sound, the Bluetooth link will be disconnected
and the power will turn off.
How to use
Pairing
Change direction - Before using the headset for the first time, it must be paired with a
Bluetooth-enabled handset.
- There are 2 pairing modes with the HBM-220.
1) Easy Pairing
�Press and hold the MFB for 5 seconds to turn on the HBM-220.
�The Headset will enter auto-reconnect mode for 10 seconds.
(if your Headset has already been paired with the handset, the
Headset will automatically reconnect to the handset when the
HBM-220 is powered on).
4 5
 How to use How to use

�After 10 seconds, the HBM-220 will automatically enter pairing mode. Auto reconnect
�When the Headset enters pairing mode, the LED indicator will show
a solid blue light. - If the HBM-220 is turned off (either accidentally or intentionally) whilst
�Using your handset, find the Bluetooth menu and “search for” or connected to a handset, the Headset and handset will disconnect.
“add” new devices. The Headset and handset will automatically reconnect when the
�Select “LG HBM-220” from the list of devices and pair it with your HBM-220 is turned back on (provided that both devices are within
handset. the required range of 33 feet 10 metres).
�When asked for the passkey or PIN during pairing, please enter
“0000” (4 zeros). [ Out of range ]
�Once pairing has been completed successfully, you will hear a beep. - When your handset and HBM-220 are separated by a range of 33
�After pairing has been completed, make sure you “Connect” to the feet (10 metres) or more, the Headset and handset will disconnect.
LG HBM-220. When the handset and HBM-220 are within the required range again,
�If you want to pair with a different device in the future, the Headset the HBM-220 will automatically reconnect to the handset.
must be in pairing mode. - If the Headset and handset do not automatically reconnect when they
�If the Headset is in pairing mode for 3 minutes without being are back within the required range, briefly press the MFB on the HBM-
connected to a handset, the HBM-220 will automatically turn off. 220 to reconnect manually.
2) Manual Pairing Volume control
�With the power off, press and hold the MFB for 7 seconds. - Press the VOLUME UP or VOLUME DOWN button to adjust the speaker
�When the Headset enters pairing mode, the LED indicator will show volume.
a solid blue light. - There are eight speaker volume levels.
�Using your handset, find the Bluetooth menu and “search for” or
“add” new devices. Calling
�Select “LG HBM-220” from the list of devices and pair it with your
handset. Answering a call
�When asked for the passkey or PIN during pairing, please enter - When there is an incoming call, the Headset will ring.
“0000” (4 zeros). - Briefly press the MFB to answer the incoming call.
�Once pairing has been completed successfully, you will hear a beep.
�After pairing has been completed, make sure you “Connect” to the Making a call
LG HBM-220. - If you make a call from the handset, the call will (depending on the
�If you want to pair with a different device in the future, the Headset phone settings) automatically transfer to the Headset. If the call is not
must be in pairing mode. automatically transferred, you can manually transfer the call by briefly
�If the Headset is in pairing mode for 3 minutes without being pressing the MFB on the HBM-220 (handset and headset must be
connected to a handset, the HBM-220 will automatically turn off. paired).
6 7
 How to use Summary of button functions

HBM-220
Function Action
Voice-dialling* Status
- Briefly press the MFB to activate “Voice Command”. Power on Power off Press the MFB for 5 seconds.
For best results, record the voice-dialling tag through your Headset. Power off Power on Press the MFB for at least 5 seconds.
NOTE: If your handset does not support voice-dialling, this action may Volume up Talking Briefly press the VOLUME UP button.
activate last number redial. Volume down Talking Briefly press the VOLUME DOWN button.
Transferring a call Talking - Handset to Headset
Last number redial* Briefly press the MFB (must be paired)
- Headset to handset
- Press and hold the MFB for 1 second to activate “Last number redial”.
Press and hold the VOLUME UP button
The headset will beep and then call the last number dialled. for 5 seconds.
Answering a call Ringing Briefly press the MFB.
Ending a call Ending a call Talking Briefly press the MFB.
- Briefly press the MFB. Call waiting Talking Press the MFB for 1 second.
Last number redial Idle Press the MFB for 1 second.
Transferring a call*
Voice dialing Idle Briefly press the MFB.
- Whilst on a call, briefly press the MFB to transfer the audio from the
(handset must support)
handset to the Headset (the Headset and handset must be paired).
Call reject Ringing Press the MFB for 1 second.
- To transfer a call from the Headset to handset, press and hold the
Pairing mode(Manual) Power off Press the MFB for 7 seconds.
VOLUME UP button for 5 seconds.

Call waiting* LED indication

- Answer a second call without hanging up the first call by pressing the
MFB for 1 second. Press the MFB for 1 second to return to the original
call. Function HBM-220 Status Action
- Briefly press the MFB to terminate both calls at once. Operating Power on The blue LED light flickers 4 times.
Power off The blue LED light flickers 4 times
Call Reject*
and then turns off.
- Activate call reject by pressing the MFB for 1 second when the
Pairing mode The blue LED light stays on.
handset rings.
Headset / handsfree The blue LED light flickers
* These functions may only be used if your handset supports them. Profile connected twice every 5 seconds.
For further information about using these features, please consult Call connected The blue LED light flickers
your handset's user manual. twice every 5 seconds.
Charging Charging The blue LED light stays on.
Charging complete The LED light turns off.
8 9
 Troubleshooting Precautions

Does not turn on Check whether the battery Charge the battery.
of the HBM-220 is fully
charged. Do not drop the device from a height.
Unable to Check whether Determine whether your
communicate with the handset supports handset supports
the LG Bluetooth® the Headset or Handsfree the Headset or Handsfree
Headset HBM-220 Bluetooth profiles. Bluetooth profiles.
Check whether the battery Charge the battery.
of the HBM-220 is low.
Unable to pair the Check and make sure the Press and hold the MFB for Do not modify, repair, or disassemble.
HBM-220 with the Headset is on. at least 5 seconds to turn on
Bluetooth® device the Headset.
Check and make sure With the power off, press
the Headset is placed and hold the MFB for
in pairing mode. 7 seconds to put the
Headset in pairing mode.
Low volume(speaker) Check the speaker volume. lncrease the volume level. Do not expose directly to water,
alcohol, benzene, etc. for cleaning.

Specification

Do not expose directly to flammables.

ITEM Description
Bluetooth® specification V2.0 (handsfree / headset profiles)
Battery 3.7V, L i - Polymer, 110mAh
Stand by time Up to 180Hrs
Talk Time Up to 8Hrs
Do not place or keep the device near
Charging time Less than 2 hrs
flammables.
Operation temperature -10℃ ~ 60℃
Dimension / weight 19.5mm(W) X 45mm(L) X 9.5mm(H) / 10.7g

10 11
 Precautions Declaration of confirmation

FCC NOTICE TO USERS :

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
Keep the device away from humidity (2) This device must accept any interference received, including
and dust. interference that may cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user's authority to operate the device.
Do not place heavy objects on the device. CE NOTICE TO USERS :
Hereby, LG Electronics Inc. declares that this HBM-220 is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.

Only use the headset with an LG original

charger (travel adaptor, vehicle power Additional information
charger), otherwise it may be damaged.
1. Radio frequency exposure
This Bluetooth® Headset HBM-220, is a radio transmitter and receiver.
When in operation it communicates with a Bluetooth® equipped
mobile device by receiving and transmitting radio frequency (RF)
�Changes or modifications not expressly approved by the party electromagnetic fields (microwaves) in the frequency range 2.4 to
responsible for compliance could void the user's authority to 2.4835 GHz. The output power of the radio transmitter is low (0.001
operate the equipment. watts). Your Bluetooth® Headset is designed to operate in compliance
�There is a risk of explosion if the battery is replaced by with the RF exposure guidelines and limits set by national authorities
an incorrect type. and international health agencies when used any compatible LG
�Dispose of used batteries according to the Electronics mobile phone.
instructions.
�The earloop is made of a durable plastic. 2. Potentially explosive atmosphere
However, bending the earloop repeatedly Turn off your electronic device when in any area with a potentially
is not recommended. explosive atmosphere. Although this is uncommon, your electronic
device could generate sparks. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death. Areas with
a potentially explosive atmosphere are often, but not always, clearly
marked.
12 13
 Additional information Additional information

3. Emergency calls
IMPORTANT!
This Bluetooth® headset and the electronic device connected to the - If LG Electronics repairs or replaces the product, the repaired or
headset operate using radio signals, mobile and landline networks replaced product shall be warranted for the remaining time of the
as well as user - programmed functions, which cannot guarantee original warranty period or for ninety (90) days from the date of
connection under all conditions. Therefore you should never rely repair, whichever is longer. Repair or replacement may involve the
solely upon any electronic device for essential communications (e.g. use of functionally equivalent reconditioned units. Replaced parts
medical emergencies). Remember, in order to make or receive calls, or components will become the property of LG Electronics.
the headset and the electronic device connected to the headset must
be switched on and in a service area with adequate mobile signal - This Warranty does not cover any failure of the product due to normal
strength. Emergency calls may not be possible on all mobile phone wear and tear, or due to misuse, including but not limited to use in
networks or when certain network services and/or phone features other than the normal and customary manner, in accordance with
are in use. Check with your local service provider. instructions for use and maintenance of the product. Nor does this
warranty cover any failure of the product due to accident, modification
4. Battery information or adjustment, acts of God or damage resulting from liquid.
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of - This warranty does not cover product failures due to improper repair
time could have reduced capacity the first few times it is used. installations, modifications or service performed by a non-LG
Do not expose the battery to extreme temperatures, never above Electronics authorised person. Tampering with any of the seals on
+60。 C(+140。 F) or under -20。C(-4。 F). For maximum battery capacity, the product will void the warranty.
use the battery at room temperature. If the battery is used in low - THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR
temperatures, the battery capacity will be reduced. The battery can ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL
only be charged in temperatures between +10。 C(+50。 F) and +45。C IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
(+113。 F). For your safety, do not remove the battery incorperated in
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
the product. If you need to replace the battery, take it to the nearest
authorised LG Electronics service point or dealer for assistance. PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS
5. Recycling the battery in your Bluetooth® headset VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
The battery in your Bluetooth® Headset must be disposed of properly DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT
and should never be placed in municipal waste. The LG Electronics LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL
service partner who removes the battery will dispose of it according EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
to local regulations.
�Some countries/states do not allow the exclusion or limitation of
6. Conditions incidental or consequential damages, or limitation of the duration
- The warranty is valid only if the original receipt issued to the original of implied warranties, so the preceding limitations or exclusions
purchaser by the dealer, specifying the date of purchase and serial may not apply to you. The warranty provided does not affect the
number, is presented with the product to be repaired or replaced. consumer's statutory rights under applicable national legislation
LG Electronics reserves the right to refuse warranty service if this in force, nor the consumer's rights against the dealer arising from
information has been removed or changed after the original their sales/purchase contract.
purchase of the product from the dealer.
14 15
 Limited warranty

Subject to the conditions of this Limited Warranty, LG Electronics

warrants this product to be free from defects in design, material and
workmanship at the time of its original purchase by a consumer, and
for a subsequent period of one (1) year. Should your product need
warranty service, please return it to the dealer from whom it was
purchased or contact your local LG Electronics contact centre to
get further information.

IMPORTANT SAFETY INFORMATION

Avoiding hearing damage Permanent hearing loss may occur if you

use your headset at a high volume. Set the volume to a safe level.
Over time you can become accustomed to a higher volume that may
sound normal but can be damaging to your hearing. If you experience
ringing in your ears or muffled speech, stop listening and have your
hearing checked. The louder the volume, the less time is required
before your hearing could be affected.
Hearing experts suggest that to protect your hearing:
�Limit the amount of time you use the headset at high volume.
�Avoid turning up the volume to block out noisy surroundings.
�Turn the volume down if you can't hear people speaking near you.
Using headsets safely Use of headsets to listen to music while
operating a vehicle is not recommended and is illegal in some areas.
Be careful and attentive whilst driving. Stop using this device if you
find it disruptive or distracting whilst operating any type of vehicle or
performing any other activity that requires your full attention.

16