Scribd
Upload
758 views1 page

YLS Series Power Fiber Laser 02

The document describes IPG Photonic's YLS series of high power ytterbium fiber lasers for industrial applications. The series includes models from 2000 to 6000 watts that can cut mild steel up to 3/4 inches, stainless steel up to 5/8 inches, and aluminum up to 1/2 inches thick. The lasers offer plug-and-play design, excellent cutting quality, and efficiency three times that of CO2 lasers while not requiring laser gas.

Uploaded by

Miguel Miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
758 views1 page

YLS Series Power Fiber Laser 02

The document describes IPG Photonic's YLS series of high power ytterbium fiber lasers for industrial applications. The series includes models from 2000 to 6000 watts that can cut mild steel up to 3/4 inches, stainless steel up to 5/8 inches, and aluminum up to 1/2 inches thick. The lasers offer plug-and-play design, excellent cutting quality, and efficiency three times that of CO2 lasers while not requiring laser gas.

Uploaded by

Miguel Miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

YLS SERIES - 2000, 3000, 4000,

5000, 6000 POWER FIBER LASER


IPG Photonics high power CW Ytterbium Fiber Laser YLS series are APPLICATION
compact, rugged, and efficient power supply systems for industrial Available on the MetalMaster Xcel, and MPC2000 machine models.
applications.
CUT PLATE MEASUREMENTS
FEATURES AND BENEFITS:
- Plug and play design. Series Mild Steel Stainless Steel Aluminum
- Excellent cutting and marking quality.
2000 up to 5/8 up to 1/2 up to 7/16
- Different models available from 2000-6000 watt systems.
- 20 meter (65.6) fiber cable included providing for an extremely 3000 up to 3/4 up to 5/8 up to 1/2
large cutting area and flexibility in the placement of the unit. 4000 up to 3/4 up to 5/8 up to 1/2
- Three times more efficient than CO2 lasers. 5000 up to 3/4 up to 5/8 up to 1/2
- Does not require laser gas, making for cost saving operation.
6000 up to 3/4 up to 5/8 up to 1/2
- Cutting speeds comparable to CO2 lasers.
- Produces virtually dross-free cuts.

SYSTEM DESCRIPTION
IPG Photonics high power CW Ytterbium Fiber Laser YLS Series
systems are created from active optical fibers and semiconductor
diodes; merging two of the most innovative and advanced laser
technologies. Fiber lasers use single emitter semiconductor diodes
as the light source to pump the active fibers. The laser beam emitted
is contained within optical fibers and delivered through an armored
flexible cable. Active fibers, special optical fibers doped with rare earth
ions, allow for an extremely bright light from a very small core, thus Messer Cutting Systems, Inc.
W141 N9427 Fountain Boulevard
making possible the production of kilowatt class output with excellent Menomonee Falls, WI 53051
beam quality. Phone: 262-255-5520
Fax: 262-255-5170
[email protected]
www.messer-cs.com
Espaol www.messer-cs.com/mx/us/

You might also like