Profile library

CHECKED SECTIONS

SCIA

Scientific Application Group

________________________________________________________________________

Release : Data V2.0

Module : SE.01, SE.05
Manual : Checked sections
Revision : October 2004

________________________________________________________________________

SCIA Group n.v.

Scientific Application Group
Industrieweg 1007 B-3540 Herk-de-Stad (Belgi)
Tel.(+32) (0)13/55 17 75 Fax.(+32) (0)13/55 41 75
E-mail [email protected]

________________________________________________________________________

SCIA W+B Software b.v.

Kroonpark 10
6831 GV ARNHEM
Tel. 026 32 01 230

________________________________________________________________________

SCIA sarl
Parc Club des Prs
Rue Papin, 29 - F-59650 Villeneuve d'Asq (France)
Tel.(+33) (0) 3.20.04.10.60 Fax.(+33) (0) 3.20.04.03.36
E-mail [email protected]

________________________________________________________________________
ABOUT THIS MANUAL

The following conventional text formats and symbols are used throughout this manual :

Convention Meaning

bold Indicates texts used in the program (menus, texts in dialog

windows, buttons, etc.).
E.g. Enter the length of the beam in the Length field.

[between brackets]] Indicates a button.

E.g. Click on [OK]] to confirm.

Indicates a procedure to follow to execute this operation. E.g.

! Italic text
! To change the properties of ...

1. Step 1 Indicates the different steps in a procedure. Each step describes

2. Step 2 one action. E.g.
1. Enter the value in the Coefficient field.
2. Click on [OK]] to confirm.

Menu > Submenu Indicates items and subitems from the main menu (on top of the
screen) or from the menu tree (left side of the screen).
E.g. ... choose Setup > Options from the main menu.

Information in this document is subject to change without notice. No part of this

document may be reproduced, stored in a retrieval system or transmitted, in any form or
by any means, electronic or mechanical, for any purpose, without the express written
permission of the publisher.
SCIA Software is not responsible for direct or indirect damage as a result of imperfections
in the documentation and/or software.

Copyright 2004 SCIA Group. All rights reserved.

TABLE OF CONTENTS

INTRODUCTION....................................................................................................................... 4

INTRODUCTION TO THE CHECKED SECTIONS............................................................................. 4

SOURCES ....................................................................................................................................... 4
OVERVIEW .................................................................................................................................... 6

SECTION DATA....................................................................................................................... 11

I SECTIONS .................................................................................................................................. 11
IPE............................................................................................................................................... 11
HD ............................................................................................................................................... 14
HD(ARBED)................................................................................................................................. 16
HEA............................................................................................................................................. 18
HEB............................................................................................................................................. 20
HEC............................................................................................................................................. 22
HEM............................................................................................................................................ 23
HE ............................................................................................................................................... 24
I ................................................................................................................................................... 26
IPN .............................................................................................................................................. 29
UB ............................................................................................................................................... 31
UC ............................................................................................................................................... 34
RSJ .............................................................................................................................................. 36
HL ............................................................................................................................................... 38
UBP ............................................................................................................................................. 40
H(JIS) .......................................................................................................................................... 42
W ................................................................................................................................................. 44
W(IMP) ........................................................................................................................................ 50
M ................................................................................................................................................. 53
M(IMP) ........................................................................................................................................ 55
S................................................................................................................................................... 56
S(IMP).......................................................................................................................................... 58
HP................................................................................................................................................ 60
HP(IMP) ....................................................................................................................................... 62
RECTANGULAR HOLLOW SECTIONS ......................................................................................... 64
SHS ............................................................................................................................................. 64
SHSCF......................................................................................................................................... 67
RHS ............................................................................................................................................. 70
RHSCF ........................................................................................................................................ 73
VHP............................................................................................................................................. 76
MSH ............................................................................................................................................ 80
QRO ............................................................................................................................................ 86
RRO............................................................................................................................................. 91
HSS ............................................................................................................................................. 96
HSS(IMP)................................................................................................................................... 100
CIRCULAR HOLLOW SECTIONS ............................................................................................... 106
MSRR........................................................................................................................................ 106
CHS ........................................................................................................................................... 113
CHSCF ...................................................................................................................................... 115
RO ............................................................................................................................................. 118
HSS(CHS) ................................................................................................................................. 127
HSS(ICHS)................................................................................................................................ 130
PIPE........................................................................................................................................... 134
PIPE(IMP).................................................................................................................................. 135
ANGLE SECTIONS ..................................................................................................................... 138
RSUA ........................................................................................................................................ 138
RSEA......................................................................................................................................... 140
HFLEQ ....................................................................................................................................... 142
HFLUE ....................................................................................................................................... 145
L ................................................................................................................................................ 147
LS .............................................................................................................................................. 149
L(AISC)..................................................................................................................................... 151
L(IMP)........................................................................................................................................ 153
L(CSN)...................................................................................................................................... 156
CHANNEL SECTION .................................................................................................................. 159
PFC............................................................................................................................................ 159
RSC ........................................................................................................................................... 161
U................................................................................................................................................ 163
UPN........................................................................................................................................... 165
UAP........................................................................................................................................... 167
UPE ........................................................................................................................................... 169
UPE(CSN)................................................................................................................................. 171
C ................................................................................................................................................ 172
C(IMP) ....................................................................................................................................... 174
MC............................................................................................................................................. 176
MC(IMP).................................................................................................................................... 179
TEE SECTION ............................................................................................................................ 181
UCT........................................................................................................................................... 181
UBT........................................................................................................................................... 183
T ................................................................................................................................................ 186
TB.............................................................................................................................................. 187
TPS............................................................................................................................................ 189
IPET .......................................................................................................................................... 190
HEAT ........................................................................................................................................ 192
HEBT ........................................................................................................................................ 194
HEMT ....................................................................................................................................... 196
WT............................................................................................................................................. 197
WT(IMP).................................................................................................................................... 201
MT............................................................................................................................................. 205
MT(IMP) .................................................................................................................................... 207
ST .............................................................................................................................................. 209
ST(IMP) ..................................................................................................................................... 211
FULL RECTANGULAR SECTION ............................................................................................... 214
FL .............................................................................................................................................. 214
BRFL......................................................................................................................................... 219
S(RAIL)..................................................................................................................................... 226
FULL CIRCULAR SECTION ....................................................................................................... 228
RD ............................................................................................................................................. 228
ASYMMETRIC I SECTION ......................................................................................................... 230
IPY ............................................................................................................................................ 230
Z SECTION ................................................................................................................................ 232
Z ................................................................................................................................................ 232
COLD FORMED SECTION .......................................................................................................... 234
KL ............................................................................................................................................. 234
CFLEQ ....................................................................................................................................... 237
CFLUE ....................................................................................................................................... 238
CFUEQ ....................................................................................................................................... 240
CFUUE ....................................................................................................................................... 243
CFZ ........................................................................................................................................... 246
CFC ........................................................................................................................................... 247
CFOMEGA ................................................................................................................................. 249
C(MET) ..................................................................................................................................... 251
Z(MET) ..................................................................................................................................... 253
E(MET) ..................................................................................................................................... 254
SADEFC ................................................................................................................................... 257
SADEFCP ................................................................................................................................. 258
SADEFS.................................................................................................................................... 259
SADEFSP.................................................................................................................................. 260
SADEFSE ................................................................................................................................. 261
SADEFSEP ............................................................................................................................... 262
SADEFZ.................................................................................................................................... 264
MBA(PDF)................................................................................................................................ 266
MBB(PDF)................................................................................................................................ 267
MBC(PDF)................................................................................................................................ 269
Z(PDF) ...................................................................................................................................... 270
RAIL SECTION........................................................................................................................... 272
SA.............................................................................................................................................. 272
SF .............................................................................................................................................. 273
INTRODUCTION

INTRODUCTION TO THE CHECKED SECTIONS

The data in the profile library are checked according to referenced sources. The checks
are performed manually and/or by means of electronic data.
For each type considered, the checked properties, variables and sections are listed.

SOURCES

The following sources are used to check the section characteristics :

CBLIA CBLIA
Centre Belgo-Luxembourgeois d'information de l'acier
Belgisch-Luxemburgs staalvoorlichitingscentrum
6e uitgave 1973

ARBED Profil ARBED

Sales programme Structural Shapes
Edition Octobre 1995

SG Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998

BS BS 5950 part 1 : 1990 & EN 10210-2

Section Tables

BS BS EN 10219-2:1997
Cold formed welded structural hollow sections of non-alloy and fine
grain steels
Part 2.

VAK VHP- Technische Daten

Profile library Checked sections Introduction 4

 Voest-Alpine Krems
04/99

VAK Standard sections

Voest-Alpine Krems
08/97

VM Structural hollow sections (MSH)

circular square rectangular
Vallourec & Mannesmann Tubes
Edition 1998

SIB Stahl im Hochbau

Handbuch fr die Anwendung von Stahl im Hoch- und Tiefbau
14.Auflage Band I / Teil 1

SAG Bauen mit Stahl

Thema UPE, UNP, UAP
Salzgitter AG

ARBED Profil ARBED

Sales programme Structural Shapes
Edition 1-2001

FERONA CD-ROM Database Ferona

Version 3.0
1999

AISC CD-Rom Database AISC

Shapes Database
U.S. Customary & Metric Units
Version 3.0
2001

Profile library Checked sections Introduction 5

METSEC Metsec Building Products Limited
ZED Purlins & C-Sections
2001

SADEF SADEF Modern Steel Products

Bouwcomponenten en bouwsystemen voor de industriebouw
April 2002

PDF Technisches Handbuch

Profil du Futur
MultiBeam & ZED sections

OVERVIEW

REVISION : 05/04/2004

I section (formcode 1)
HD CBLIA
HEA ARBED
HEB ARBED
HEC SG
HEM ARBED
HE ARBED
IPE ARBED
UB BS
UC BS
RSJ BS
IPN ARBED
I SIB
HL ARBED
HD(Arbed) ARBED
H(JIS) ARBED
W AISC

Profile library Checked sections Introduction 6

W(Imp) AISC
M AISC
M(Imp) AISC
S AISC
S(Imp) AISC
HP AISC
HP(Imp) AISC

Rectangular hollow section (formcode 2)

SHS BS
SHSCF BS
RHS BS
RHSCF BS
VHP VAK
MSH VM
QRO SIB
RRO SIB
HSS AISC
HSS(Imp) AISC

Circular hollow section (formcode 3)

MSRR VM
CHS BS
CHSCF BS
RO SIB
HSS(CHS) AISC
HSS(ICHS) AISC
PIPE AISC
PIPE(Imp) AISC

Angle section (formcode 4)

RSUA BS
RSEA BS

Profile library Checked sections Introduction 7

HFLeq SG
HFLue SG
L SIB
LS SIB
L(AISC) AISC
L(Imp) AISC
L(CSN) FERONA

Channel section (formcode 5)

PFC BS
RSC BS
U SIB
UPN ARBED
UAP ARBED
UPE SAG
UPE(CSN) FERONA
C AISC
C(Imp) AISC
MC AISC
MC(Imp) AISC

Tee section (formcode 6)

UCT BS
UBT BS
T SIB
TB SIB
TPS SIB
IPET SG
HEAT SG
HEBT SG
HEMT SG
WT AISC
WT(Imp) AISC

Profile library Checked sections Introduction 8

MT AISC
MT(Imp) AISC
ST AISC
ST(Imp) AISC

Full rectangular section (formcode 7)

FL SIB
BRFL SIB
S(RAIL) SIB

Full circular section (formcode 11)

RD SIB

Asymmetric I section (formcode 101)

IPY CBLIA

Z section (formcode 102)

Z SIB

Cold formed section (formcode 110-115)

KL VAK
CFLeq SG
CFLue SG
CFUeq SG
CFUue SG
CFZ SG
CFC SG
CFOmega SG
C(MET) METSEC
Z(MET) METSEC
E(MET) METSEC
SADEFC SADEF
SADEFCP SADEF

Profile library Checked sections Introduction 9

SADEFS SADEF
SADEFSP SADEF
SADEFSE SADEF
SADEFSEP SADEF
SADEFZ SADEF
MBA(PDF) PDF
MBB(PDF) PDF
MBC(PDF) PDF
Z(PDF) PDF

Rail section (formcode 151-152)

SA SIB
SF SIB

Profile library Checked sections Introduction 10

SECTION DATA

I SECTIONS

IPE

Formcode 1
Description European I-beams
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.6-9
Revision date 15/10/98
By FVI
PBD file IPE.PBD
Code Euronorm 19-57
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz

Profile library Checked sections Section data 11

8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 12

100 500
120 500A
120A 500O
140 550
140A 550A
160 550O
160A 600
180 600A
180A 600O
180O 750X137
200 750X147
200A 750X173
200O 750X196
220 80
220A
220O
240
240A
240O
270
270A
270O
300
300A
300O
330
330A
330O
360
360A
360O
400
400A
400O
450
450A
450O

Profile library Checked sections Section data 13

HD

Formcode 1
Description Wide flange columns
Source CBLIA
Centre Belgo-Luxembourgeois dInformation de
lacier
6e uitgave
1973
pp.22-23
Revision date 17/02/99
By CVL
PBD file HD.PBD
Code partially ASTM A6/A6M-90a
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0
2 iy ix
3 iz iy
6 Sy Sx
7 Sz Sy
8 Iy Ix
9 Iz Iy
10 Wy I

v x

Profile library Checked sections Section data 14

11 Wz I

v y

Checked variables

SCIA Source
symbol symbol
B b
T e
S a
R R
H h

Checked sections

100/15 260/121 360/135

100/20 260/141 360/152
100/24 260/160 360/176
130/20 260/184 360/199
130/24 260/209 400/190
130/28 260/240 400/214
130/33 260/274 400/237
160/30 260/333 400/262
160/35 260/60 400/287
160/40 260/68 400/312
160/46 260/78 400/337
210/117 260/90 400/370
210/139 310/106 400/404
210/162 310/118 400/446
210/200 310/135 400/488
210/252 310/155 400/531
210/43 310/177 400/577
210/50 310/207 400/621
210/56 310/240 400/679
210/63 310/274
210/71 310/308
210/83 310/350
210/94 310/435
260/104 310/94

Profile library Checked sections Section data 15

HD(Arbed)

Formcode 1
Description Wide flange columns
Source Arbed
Sales programme
Edition 1-2001
Revision date 17/12/01
By CVL
PBD file HD(Arbed).PBD
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wel,y
11 Wz Wel,z
14 It It
26 CM Iw
30 Mpy Wpl,y x 240 N/mm
31 Mpz Wpl,z x 240 N/mm

Profile library Checked sections Section data 16

Checked variables

SCIA Source
symbol symbol
B b
T tf
S tw
R r
H h

Checked sections

260x114 400x382
260x142 400x421
260x172 400x463
260x54.1 400x509
260x68.2 400x551
260x93.0 400x592
320x127 400x634
320x158 400x677
320x198 400x744
320x245 400x818
320x300 400x900
320x74.2 400x990
320x97.6
360x134
360x147
360x162
360x179
360x196
400x1086
400x187
400x216
400x237
400x262
400x287
400x314
400x347

Profile library Checked sections Section data 17

HEA

Formcode 1
Description European wide flange beams
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.10-17
Revision date 13/11/98
By NEM
PBD file HEA.PBD
Code Euronorm 53-62

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

Profile library Checked sections Section data 18

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 19

100 240 450
1000 240A 450A
1000A 260 500
100A 260A 500A
120 280 550
120A 280A 550A
140 300 600
140A 300A 600A
160 320 650
160A 320A 650A
180 340 700
180A 340A 700A
200 360 800
200A 360A 800A
220 400 900
220A 400A 900A

HEB

Formcode 1
Description European wide flange beams
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.10-17
Revision date 28.08.98
By NEM
PBD file HEB.PBD
Code Euronorm 53-62

Profile library Checked sections Section data 20

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections
100 180 280
1000 200 300
120 220 320
140 240 340
160 260 360

Profile library Checked sections Section data 21

400 550 700
450 600 800
500 650 900

HEC

Formcode 1
Description European wide flange beams
Source Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
pp.28-29
Revision date 01/03/99
By CVL
PBD file HEC.PBD
Code Euronorm 53-62
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy;el
11 Wz Wz;el
14 It IT
30 Mply Wy;pl x 240 N/mm

Profile library Checked sections Section data 22

31 Mplz Wz;pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

300

HEM

Formcode 1
Description European wide flange beams
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.10-17
Revision date 13/11/98
By GV
PBD file HEM.PBD
Code Euronorm 53-62
z

Checked properties

Profile library Checked sections Section data 23

Property SCIA Source
number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

100 240 450

1000 260 500
120 280 550
140 300 600
160 320 650
180 340 700
200 360 800
220 400 900

HE

Formcode 1
Description European wide flange beams

Profile library Checked sections Section data 24

Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.10-17
Revision date 26/06/03
By CVL
PBD file HE.PBD
Code Euronorm 53-62

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Profile library Checked sections Section data 25

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

1000X393 600X399 800X373

1000X409 650X343 800X444
1000X488 650X407 900X391
1000X579 700X352 900X466
600X337 700X418

Formcode 1
Description Schmale I Trger
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.28-29
pp.44
Revision date 06/03/00
By CVL
PBD file I.PBD
Code DIN 1025

Profile library Checked sections Section data 26

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
6 Sy Sy
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y-y x 240 N/mm
31 Mplz Wpl,z-z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S ts
T tg
R r2
R1 r1

Checked sections

100 140 180

120 160 200

Profile library Checked sections Section data 27

220 340 475
240 360 500
260 380 550
280 400 600
300 425 80
320 450

Profile library Checked sections Section data 28

IPN

Formcode 1
Description European standard beams
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.26-27
Revision date 06/03/00
By CVL
PBD file IPN.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source

Profile library Checked sections Section data 29

symbol symbol
B b
H h
S tw
T tf
R r2
R1 r1

Checked sections

100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
450
500
550
80

Profile library Checked sections Section data 30

UB

Formcode 1
Description British Universal Beams
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.2-B.7
Revision date 07/10/99
By CADS
PBD file UB.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration / Axis x-x
3 iz Radius of gyration / Axis y-y
8 Iy Second Moment of Area / Axis x-x
9 Iz Second Moment of Area / Axis y-y
10 Wy Elastic modulus / Axis x-x
11 Wz Elastic modulus / Axis y-y
14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Checked variables

Profile library Checked sections Section data 31

SCIA Source
symbol symbol
B B
H D
S t
T T
R r

Checked sections

Profile library Checked sections Section data 32

127/76/13 356/171/51 610/229/101
152/89/16 356/171/57 610/229/113
178/102/19 356/171/67 610/229/125
203/102/23 406/140/39 610/229/140
203/133/25 406/140/46 610/305/149
203/133/30 406/178/54 610/305/179
254/102/22 406/178/60 610/305/238
254/102/25 406/178/67 686/254/125
254/102/28 406/178/74 686/254/140
254/146/31 457/152/52 686/254/152
254/146/37 457/152/60 686/254/170
254/146/43 457/152/67 762/267/134
305/102/25 457/152/74 762/267/147
305/102/28 457/152/82 762/267/173
305/102/33 457/191/67 762/267/197
305/127/37 457/191/74 838/292/176
305/127/42 457/191/82 838/292/194
305/127/48 457/191/89 838/292/226
305/165/40 457/191/98 914/305/201
305/165/46 533/210/101 914/305/224
305/165/54 533/210/109 914/305/253
356/127/33 533/210/122 914/305/289
356/127/39 533/210/82 914/419/343
356/171/45 533/210/92 914/419/388

Profile library Checked sections Section data 33

UC

Formcode 1
Description British Universal Columns
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.8-B.10
Revision date 07/10/99
By CADS
PBD file UC.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration / Axis x-x
3 iz Radius of gyration / Axis y-y
8 Iy Second Moment of Area / Axis x-x
9 Iz Second Moment of Area / Axis y-y
10 Wy Elastic modulus / Axis x-x
11 Wz Elastic modulus / Axis y-y
14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Checked variables

SCIA Source
symbol symbol

Profile library Checked sections Section data 34

B B
H D
S t
T T
R r

Checked sections

152/152/23 356/406/634
152/152/30
152/152/37
203/203/46
203/203/52
203/203/60
203/203/71
203/203/86
254/254/107
254/254/132
254/254/167
254/254/73
254/254/89
305/305/118
305/305/137
305/305/158
305/305/198
305/305/240
305/305/283
305/305/97
356/368/129
356/368/153
356/368/177
356/368/202
356/406/235
356/406/287
356/406/340
356/406/393
356/406/467
356/406/551

Profile library Checked sections Section data 35

RSJ

Formcode 1
Description British Joists
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.12-B.14
Revision date 07/10/99
By CADS
PBD file RSJ.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration / Axis x-x
3 iz Radius of gyration / Axis y-y
8 Iy Second Moment of Area / Axis x-x
9 Iz Second Moment of Area / Axis y-y
10 Wy Elastic modulus / Axis x-x
11 Wz Elastic modulus / Axis y-y
14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Checked variables

SCIA Source

Profile library Checked sections Section data 36

symbol symbol
B B
H D
S t
T T
R r1
R1 r2

Checked sections

Profile library Checked sections Section data 37

102/102/23
102/44/7
114/114/27
127/114/27
127/114/29
127/76/16
152/127/37
203/152/52
254/114/37
254/203/82
76/76/13
76/76/15
89/89/19

HL

Formcode 1
Description Beams with very wide flanges
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1-2001
pp.34-35
Revision date 28/03/01
By FVI
PBD file HL.PBD
Code
z

Checked properties

Profile library Checked sections Section data 38

Property SCIA Source
number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wel,y
11 Wz Wel,z
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 39

1000A 1000X883 920X417
1000B 1100A 920X446
1000M 1100B 920X488
1000X296 1100M 920X534
1000X477 1100R 920X585
1000X554 920X342 920X653
1000X642 920X365 920X784
1000X748 920X387 920X967

UBP

Formcode 1
Description British wide flange bearing piles
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1-2001
pp.70-71
Revision date 12/09/02
By CVL
PBD file UBP.PBD
Code BS 4-1:1993
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy

Profile library Checked sections Section data 40

3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wel,y
11 Wz Wel,z
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 41

203x203x45 305x305x126 305x305x95
203x203x54 305x305x149 356x368x109
254x254x63 305x305x186 356x368x133
254x254x71 305x305x223 356x368x152
254x254x85 305x305x79 356x368x174
305x305x110 305x305x88

H(JIS)

Formcode 1
Description Japanese H sections
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1-2001
pp.92-95
Revision date 12/09/02
By CVL
PBD file H(JIS).PBD
Code JIS G 3192 (1994)
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz

Profile library Checked sections Section data 42

10 Wy Wel,y
11 Wz Wel,z
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 43

100x100x6x8 300x300x12x12 400x400x30x50
125x125x6.5x9 300x300x15x15 500x200x10x16
150x150x7x10 350x175x6x9 500x200x11x19
150x75x5x7 350x175x7x11 500x200x9x14
175x175x7.5x11 350x350x10x16 500x300x11x15
200x100x4.5x7 350x350x12x19 500x300x11x18
200x100x5.5x8 350x350x13x13 600x300x12x17
200x200x12x12 350x350x16x16 600x300x12x20
200x200x8x12 350x350x19x19 600x300x14x23
250x125x5x8 400x300x10x16 700x300x13x20
250x125x6x9 400x400x11x18 700x300x13x24
250x250x11x11 400x400x13x21 800x300x14x22
250x250x14x14 400x400x15x15 800x300x14x26
250x250x9x14 400x400x18x18 900x300x15x23
300x150x5.5x8 400x400x18x28 900x300x16x28
300x150x6.5x9 400x400x20x35 900x300x18x34
300x300x10x15 400x400x21x21

Formcode 1
Description American Wide-Flange shapes
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file W.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 44

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 45

R kdes-tf

Checked sections

1000X222 150X29.8 310X117

1000X249 150X37.1 310X129
1000X272 200X100 310X143
1000X296 200X15 310X158
1000X314 200X19.3 310X179
1000X321 200X22.5 310X202
1000X350 200X26.6 310X21
1000X371 200X31.3 310X226
1000X393 200X35.9 310X23.8
1000X412 200X41.7 310X253
1000X415 200X46.1 310X28.3
1000X443 200X52 310X283
1000X483 200X59 310X313
1000X486 200X71 310X32.7
1000X494 200X86 310X342
1000X539 250X101 310X375
1000X554 250X115 310X38.7
1000X584 250X131 310X415
1000X591 250X149 310X44.5
1000X642 250X167 310X454
1000X748 250X17.9 310X500
1000X883 250X22.3 310X52
100X19.3 250X25.3 310X60
1100X343 250X28.4 310X67
1100X390 250X32.7 310X74
1100X433 250X38.5 310X79
1100X499 250X44.8 310X86
130X23.8 250X49.1 310X97
130X28.1 250X58 360X101
150X13 250X67 360X1086
150X13.5 250X73 360X110
150X18 250X80 360X1202
150X22.5 250X89 360X122
150X24 310X107 360X134

Profile library Checked sections Section data 46

360X147 410X53 530X82
360X162 410X60 530X85
360X179 410X67 530X92
360X196 410X75 610X101
360X216 410X85 610X113
360X237 460X106 610X125
360X262 460X113 610X140
360X287 460X128 610X153
360X314 460X144 610X155
360X32.9 460X158 610X174
360X347 460X177 610X195
360X382 460X193 610X217
360X39 460X213 610X241
360X421 460X235 610X262
360X44 460X260 610X285
360X463 460X52 610X307
360X509 460X60 610X341
360X51 460X68 610X372
360X551 460X74 610X415
360X57.8 460X82 610X455
360X592 460X89 610X498
360X634 460X97 610X551
360X64 530X101 610X82
360X677 530X109 610X92
360X72 530X123 690X125
360X744 530X138 690X140
360X79 530X150 690X152
360X818 530X165 690X170
360X900 530X182 690X192
360X91 530X196 690X217
360X990 530X219 690X240
410X100 530X248 690X265
410X114 530X272 690X289
410X132 530X300 690X323
410X149 530X66 690X350
410X38.8 530X72 690X384
410X46.1 530X74 690X419

Profile library Checked sections Section data 47

690X457 760X531 920X238
690X500 760X582 920X253
690X548 840X176 920X271
690X802 840X193 920X289
760X134 840X210 920X313
760X147 840X226 920X342
760X161 840X251 920X345
760X173 840X299 920X365
760X185 840X329 920X381
760X196 840X359 920X387
760X220 840X392 920X417
760X257 840X433 920X446
760X284 840X473 920X488
760X314 840X527 920X534
760X350 840X576 920X585
760X389 920X1188 920X653
760X434 920X201 920X784
760X484 920X223 920X967

Profile library Checked sections Section data 48

Profile library Checked sections Section data 49
W(Imp)

Formcode 1
Description American Wide-Flange shapes
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file W(Imp).PBD
Code ASTM A6/A6M
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy

Profile library Checked sections Section data 50

14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf

Checked sections

10X100 12X106 12X35 14X211

10X112 12X120 12X40 14X22
10X12 12X136 12X45 14X233
10X15 12X14 12X50 14X257
10X17 12X152 12X53 14X26
10X19 12X16 12X58 14X283
10X22 12X170 12X65 14X30
10X26 12X19 12X72 14X311
10X30 12X190 12X79 14X34
10X33 12X210 12X87 14X342
10X39 12X22 12X96 14X370
10X45 12X230 14X109 14X38
10X49 12X252 14X120 14X398
10X54 12X26 14X132 14X426
10X60 12X279 14X145 14X43
10X68 12X30 14X159 14X455
10X77 12X305 14X176 14X48
10X88 12X336 14X193 14X500

Profile library Checked sections Section data 51

 14X53 18X71 24X370 30X357
14X550 18X76 24X55 30X391
14X605 18X86 24X62 30X90
14X61 18X97 24X68 30X99
14X665 21X101 24X76 33X118
14X68 21X111 24X84 33X130
14X730 21X122 24X94 33X141
14X74 21X132 27X102 33X152
14X808 21X147 27X114 33X169
14X82 21X166 27X129 33X201
14X90 21X182 27X146 33X221
14X99 21X201 27X161 33X241
16X100 21X44 27X178 33X263
16X26 21X48 27X194 33X291
16X31 21X50 27X217 33X318
16X36 21X55 27X235 33X354
16X40 21X57 27X258 33X387
16X45 21X62 27X281 36X135
16X50 21X68 27X307 36X150
16X57 21X73 27X336 36X160
16X67 21X83 27X368 36X170
16X77 21X93 27X539 36X182
16X89 24X103 27X84 36X194
18X106 24X104 27X94 36X210
18X119 24X117 30X108 36X230
18X130 24X131 30X116 36X232
18X143 24X146 30X124 36X245
18X158 24X162 30X132 36X256
18X175 24X176 30X148 36X260
18X35 24X192 30X173 36X280
18X40 24X207 30X191 36X300
18X46 24X229 30X211 36X328
18X50 24X250 30X235 36X359
18X55 24X279 30X261 36X393
18X60 24X306 30X292 36X439
18X65 24X335 30X326 36X527

Profile library Checked sections Section data 52

 36X650 40X297 44X290 8X13
36X798 40X324 44X335 8X15
40X149 40X327 4X13 8X18
40X167 40X331 5X16 8X21
40X183 40X362 5X19 8X24
40X199 40X372 6X12 8X28
40X211 40X392 6X15 8X31
40X215 40X397 6X16 8X35
40X235 40X431 6X20 8X40
40X249 40X503 6X25 8X48
40X264 40X593 6X8.5 8X58
40X277 44X230 6X9 8X67
40X278 44X262 8X10

Formcode 1
Description American Miscellaneous Beams
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file M.PBD
Code ASTM A6/A6M
z

Profile library Checked sections Section data 53

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf

Checked sections

100X8.9 150X6.6 250X11.2 310X14.9

130X28.1 200X9.2 250X11.9 310X16.1
150X5.5 200X9.7 250X13.4 310X17.6

Profile library Checked sections Section data 54

M(Imp)

Formcode 1
Description American Miscellaneous Beams
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file M(Imp).PBD
Code ASTM A6/A6M
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx

Profile library Checked sections Section data 55

11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf

Checked sections

10X7.5
10X8
10X9
12X10
12X10.8
12X11.8
4X6
5X18.9
6X3.7
6X4.4
8X6.2
8X6.5

Formcode 1

Profile library Checked sections Section data 56

Description American Standard Beams
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file S.PBD
Code ASTM A6/A6M
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm

Profile library Checked sections Section data 57

31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf
R1

Checked sections
100X11.5 310X52 510X98.2
100X14.1 310X60.7 610X119
130X15 310X74 610X134
150X18.6 380X64 610X149
150X25.7 380X74 610X158
200X27.4 460X104 610X180
200X34 460X81.4 75X11.2
250X37.8 510X112 75X8.5
250X52 510X128
310X47.3 510X143

S(Imp)

Formcode 1
Description American Standard Beams
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL

Profile library Checked sections Section data 58

PBD file S(Imp).PBD
Code ASTM A6/A6M
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d

Profile library Checked sections Section data 59

S tw
T tf
R kdes-tf
R1

Checked sections

10X25.4 20X66 3X7.5

10X35 20X75 4X7.7
12X31.8 20X86 4X9.5
12X35 20X96 5X10
12X40.8 24X100 6X12.5
12X50 24X106 6X17.25
15X42.9 24X121 8X18.4
15X50 24X80 8X23
18X54.7 24X90
18X70 3X5.7

HP

Formcode 1
Description American Bearing Piles
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HP.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 60

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 61

R kdes-tf

Checked sections

200X53 310X125 360X132

250X62 310X79 360X152
250X85 310X93 360X174
310X110 360X108

HP(Imp)

Formcode 1
Description American Bearing Piles
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HP(Imp).PBD
Code ASTM A6/A6M

Checked properties

Property SCIA Source

number symbol symbol

Profile library Checked sections Section data 62

1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf

Checked sections

10X42 12X74 14X73

10X57 12X84 14X89
12X53 14X102 8X36
12X63 14X117

Profile library Checked sections Section data 63

RECTANGULAR HOLLOW SECTIONS

SHS

Formcode 2
Description Square Hollow Sections
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.22-B.23
Revision date 07/10/99
By CADS
PBD file SHS.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy r : Radius of gyration
3 iz r : Radius of gyration
4 cz
5 cy
8 Iy I : Second Moment of Area
9 Iz I : Second Moment of Area
10 Wy Z : Elastic modulus
11 Wz Z : Elastic modulus
13 Wt C : Torsional constany

Profile library Checked sections Section data 64

14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Checked variables

SCIA Source
symbol symbol
B D
H D
S t
R
R1

Checked sections

100/100/10.0 160/160/12.5 260/260/12.5 400/400/20.0

100/100/4.0 160/160/16.0 260/260/6.3 400/400/22.0
100/100/5.0 160/160/5.0 260/260/8.0 400/400/25.0
100/100/6.3 160/160/6.3 300/300/10.0 400/400/8.0
100/100/8.0 160/160/8.0 300/300/12.5 450/450/12.0
120/120/10.0 180/180/10.0 300/300/16.0 450/450/16.0
120/120/12.5 180/180/12.5 300/300/6.3 450/450/19.0
120/120/4.0 180/180/16.0 300/300/8.0 450/450/22.0
120/120/5.0 180/180/5.0 350/350/10.0 450/450/25.0
120/120/6.3 180/180/6.3 350/350/12.5 450/450/28.0
120/120/8.0 180/180/8.0 350/350/16.0 450/450/32.0
140/140/10.0 200/200/10.0 350/350/19.0 50/50/2.5
140/140/12.5 200/200/12.5 350/350/22.0 50/50/3.0
140/140/5.0 200/200/16.0 350/350/25.0 50/50/3.2
140/140/6.3 200/200/5.0 350/350/8.0 50/50/4.0
140/140/8.0 200/200/6.3 40/40/2.5 50/50/5.0
150/150/10.0 200/200/8.0 40/40/3.0 50/50/6.3
150/150/12.5 250/250/10.0 40/40/3.2 500/500/12.0
150/150/16.0 250/250/12.5 40/40/4.0 500/500/16.0
150/150/5.0 250/250/16.0 40/40/5.0 500/500/19.0
150/150/6.3 250/250/6.3 400/400/10.0 500/500/22.0
150/150/8.0 250/250/8.0 400/400/12.5 500/500/25.0
160/160/10.0 260/260/10.0 400/400/16.0 500/500/28.0

Profile library Checked sections Section data 65

500/500/32.0 550/550/40.0 600/600/32.0 80/80/3.6
500/500/36.0 60/60/3.0 600/600/36.0 80/80/5.0
550/550/16.0 60/60/3.2 600/600/40.0 80/80/6.3
550/550/19.0 60/60/4.0 70/70/3.0 80/80/8.0
550/550/22.0 60/60/5.0 70/70/3.6 90/90/3.6
550/550/25.0 60/60/6.3 70/70/5.0 90/90/5.0
550/550/28.0 60/60/8.0 70/70/6.3 90/90/6.3
550/550/32.0 600/600/25.0 70/70/8.0 90/90/8.0
550/550/36.0 600/600/28.0 80/80/3.0

Profile library Checked sections Section data 66

SHSCF

Formcode 2
Description Square Hollow Sections cold formed
Source BS EN 10219-2:1997
Cold formed welded structural hollow sections of non-
alloy and fine grain steels
Part 2.
pp.16-19
Revision date 07/10/99
By CADS
PBD file SHSCF.PBD
Code BS EN 10219-2:1997
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Cross sectional area
2 iy i : Radius of gyration
3 iz i : Radius of gyration
4 cz
5 cy
8 Iy I : Second Moment of Area
9 Iz I : Second Moment of Area
10 Wy Wel : Elastic section modulus
11 Wz Wel : Elastic section modulus
13 Wt Ct : Torsional modulus constant
14 It Jt : Torsional inertia
20 V0 As : Superficial area

Profile library Checked sections Section data 67

32 G Mass

Checked variables

SCIA Source
symbol symbol
B B
H B
S T
R
R1

Checked sections

100/100/10.0 140/140/8.0 180/180/6.0 250/250/12.0

100/100/12.0 150/150/10.0 180/180/6.3 250/250/12.5
100/100/12.5 150/150/12.0 180/180/8.0 250/250/16.0
100/100/3.0 150/150/12.5 20/20/2.0 250/250/5.0
100/100/4.0 150/150/16.0 200/200/10.0 250/250/6.0
100/100/5.0 150/150/4.0 200/200/12.0 250/250/6.3
100/100/6.0 150/150/5.0 200/200/12.5 250/250/8.0
100/100/6.3 150/150/6.0 200/200/16.0 260/260/10.0
100/100/8.0 150/150/6.3 200/200/4.0 260/260/12.0
120/120/10.0 150/150/8.0 200/200/5.0 260/260/12.5
120/120/12.0 160/160/10.0 200/200/6.0 260/260/16.0
120/120/12.5 160/160/12.0 200/200/6.3 260/260/6.0
120/120/3.0 160/160/12.5 200/200/8.0 260/260/6.3
120/120/4.0 160/160/16.0 220/220/10.0 260/260/8.0
120/120/5.0 160/160/4.0 220/220/12.0 30/30/2.0
120/120/6.0 160/160/5.0 220/220/12.5 30/30/2.5
120/120/6.3 160/160/6.0 220/220/16.0 30/30/3.0
120/120/8.0 160/160/6.3 220/220/5.0 300/300/10.0
140/140/10.0 160/160/8.0 220/220/6.0 300/300/12.0
140/140/12.0 180/180/10.0 220/220/6.3 300/300/12.5
140/140/12.5 180/180/12.0 220/220/8.0 300/300/16.0
140/140/4.0 180/180/12.5 25/25/2.0 300/300/6.0
140/140/5.0 180/180/16.0 25/25/2.5 300/300/6.3
140/140/6.0 180/180/4.0 25/25/3.0 300/300/8.0
140/140/6.3 180/180/5.0 250/250/10.0 350/350/10.0

Profile library Checked sections Section data 68

350/350/12.0 400/400/16.0 60/60/6.0 80/80/6.0
350/350/12.5 50/50/2.0 60/60/6.3 80/80/6.3
350/350/16.0 50/50/2.5 70/70/2.5 80/80/8.0
350/350/8.0 50/50/3.0 70/70/3.0 90/90/3.0
40/40/2.0 50/50/4.0 70/70/4.0 90/90/4.0
40/40/2.5 50/50/5.0 70/70/5.0 90/90/5.0
40/40/3.0 60/60/2.0 70/70/6.0 90/90/6.0
40/40/4.0 60/60/2.5 70/70/6.3 90/90/6.3
400/400/10.0 60/60/3.0 80/80/3.0 90/90/8.0
400/400/12.0 60/60/4.0 80/80/4.0
400/400/12.5 60/60/5.0 80/80/5.0

Profile library Checked sections Section data 69

RHS

Formcode 2
Description Rectangular Hollow Sections
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.26-B.28
Revision date 07/10/99
By CADS
PBD file RHS.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration / axis x-x
3 iz Radius of gyration / axis y-y
4 cz
5 cy
8 Iy Second Moment of Area / axis x-x
9 Iz Second Moment of Area / axis y-y
10 Wy Elastic modulus / axis x-x
11 Wz Elastic modulus / axis y-y
13 Wt C : Torsional constany
14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Profile library Checked sections Section data 70

Checked variables

SCIA Source
symbol symbol
B B
H D
S t
R
R1

Checked sections

100/50/3.0 160/80/12.5 250/100/6.3 300/250/6.3

100/50/3.2 160/80/4.0 250/100/8.0 300/250/8.0
100/50/4.0 160/80/5.0 250/150/10.0 350/150/10.0
100/50/5.0 160/80/6.3 250/150/12.5 350/150/12.5
100/50/6.3 160/80/8.0 250/150/16.0 350/150/16.0
100/50/8.0 200/100/10.0 250/150/5.0 350/150/6.3
100/60/3.0 200/100/12.5 250/150/6.3 350/150/8.0
100/60/3.6 200/100/16.0 250/150/8.0 350/250/10.0
100/60/5.0 200/100/5.0 260/140/10.0 350/250/12.5
100/60/6.3 200/100/6.3 260/140/12.5 350/250/16.0
100/60/8.0 200/100/8.0 260/140/16.0 350/250/8.0
120/60/3.6 200/120/10.0 260/140/6.3 400/120/10.0
120/60/5.0 200/120/12.5 260/140/8.0 400/120/12.5
120/60/6.3 200/120/16.0 300/100/10.0 400/120/6.3
120/60/8.0 200/120/5.0 300/100/12.5 400/120/8.0
120/80/10.0 200/120/6.3 300/100/16.0 400/150/10.0
120/80/5.0 200/120/8.0 300/100/6.3 400/150/12.5
120/80/6.3 200/150/10.0 300/100/8.0 400/150/16.0
120/80/8.0 200/150/12.5 300/200/10.0 400/150/6.3
150/100/10.0 200/150/16.0 300/200/12.5 400/150/8.0
150/100/12.5 200/150/5.0 300/200/16.0 400/200/10.0
150/100/4.0 200/150/6.3 300/200/6.3 400/200/12.5
150/100/5.0 200/150/8.0 300/200/8.0 400/200/16.0
150/100/6.3 250/100/10.0 300/250/10.0 400/200/6.3
150/100/8.0 250/100/12.5 300/250/12.5 400/200/8.0
160/80/10.0 250/100/16.0 300/250/16.0 400/300/10.0

Profile library Checked sections Section data 71

400/300/12.5 50/30/4.0 60/40/2.5 80/40/6.3
400/300/16.0 50/30/5.0 60/40/3.0 80/40/8.0
400/300/8.0 500/200/10.0 60/40/3.2 90/50/3.0
450/250/10.0 500/200/12.5 60/40/4.0 90/50/3.6
450/250/12.5 500/200/16.0 60/40/5.0 90/50/5.0
450/250/16.0 500/200/8.0 60/40/6.3 90/50/6.3
450/250/8.0 500/300/10.0 80/40/3.0 90/50/8.0
50/30/2.5 500/300/12.5 80/40/3.2
50/30/3.0 500/300/16.0 80/40/4.0
50/30/3.2 500/300/20.0 80/40/5.0

Profile library Checked sections Section data 72

RHSCF

Formcode 2
Description Rectangular Hollow Sections cold formed
Source BS EN 10219-2:1997
Cold formed welded structural hollow sections of non-
alloy and fine grain steels
Part 2.
pp.21-26
Revision date 07/10/99
By CADS
PBD file RHSCF.PBD
Code BS EN 10219-2:1997
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Cross sectional area
2 iy ixx : Radius of gyration
3 iz iyy : Radius of gyration
4 cz
5 cy
8 Iy Ixx : Second Moment of Area
9 Iz Iyy : Second Moment of Area
10 Wy Wel,xx : Elastic section modulus
11 Wz Wel,yy : Elastic section modulus
13 Wt Ct : Torsional modulus constant
14 It Jt : Torsional inertia
20 V0 As : Superficial area

Profile library Checked sections Section data 73

32 G Mass

Checked variables

SCIA Source
symbol symbol
B B
H H
S T
R
R1

Checked sections

100/40/2.5 120/60/5.0 160/80/12.5 200/120/4.0

100/40/3.0 120/60/6.0 160/80/4.0 200/120/5.0
100/40/4.0 120/60/6.3 160/80/5.0 200/120/6.0
100/40/5.0 120/60/8.0 160/80/6.0 200/120/6.3
100/50/2.5 120/80/3.0 160/80/6.3 200/120/8.0
100/50/3.0 120/80/4.0 160/80/8.0 250/150/10.0
100/50/4.0 120/80/5.0 180/100/10.0 250/150/12.0
100/50/5.0 120/80/6.0 180/100/12.0 250/150/12.5
100/50/6.0 120/80/6.3 180/100/12.5 250/150/16.0
100/50/6.3 120/80/8.0 180/100/4.0 250/150/5.0
100/60/2.5 140/80/4.0 180/100/5.0 250/150/6.0
100/60/3.0 140/80/5.0 180/100/6.0 250/150/6.3
100/60/4.0 140/80/6.0 180/100/6.3 250/150/8.0
100/60/5.0 140/80/6.3 180/100/8.0 260/180/10.0
100/60/6.0 140/80/8.0 200/100/10.0 260/180/12.0
100/60/6.3 150/100/10.0 200/100/12.0 260/180/12.5
100/80/2.5 150/100/12.0 200/100/12.5 260/180/16.0
100/80/3.0 150/100/12.5 200/100/4.0 260/180/5.0
100/80/4.0 150/100/4.0 200/100/5.0 260/180/6.3
100/80/5.0 150/100/5.0 200/100/6.0 260/180/8.0
100/80/6.0 150/100/6.0 200/100/6.3 300/100/10.0
100/80/6.3 150/100/6.3 200/100/8.0 300/100/12.0
120/60/2.5 150/100/8.0 200/120/10.0 300/100/12.5
120/60/3.0 160/80/10.0 200/120/12.0 300/100/16.0
120/60/4.0 160/80/12.0 200/120/12.5 300/100/6.0

Profile library Checked sections Section data 74

300/100/6.3 350/250/10.0 400/300/16.0 80/40/2.0
300/100/8.0 350/250/12.0 400/300/8.0 80/40/2.5
300/150/10.0 350/250/12.5 50/30/2.0 80/40/3.0
300/150/12.0 350/250/16.0 50/30/2.5 80/40/4.0
300/150/12.5 350/250/6.0 50/30/3.0 80/40/5.0
300/150/16.0 350/250/6.3 50/30/4.0 80/60/2.0
300/150/6.0 350/250/8.0 60/40/2.0 80/60/2.5
300/150/6.3 40/20/2.0 60/40/2.5 80/60/3.0
300/150/8.0 40/20/2.5 60/40/3.0 80/60/4.0
300/200/10.0 40/20/3.0 60/40/4.0 80/60/5.0
300/200/12.0 400/200/12.5 60/40/5.0 90/50/2.0
300/200/12.5 400/200/16.0 70/50/2.0 90/50/2.5
300/200/16.0 400/200/8.0 70/50/2.5 90/50/3.0
300/200/6.0 400/300/10.0 70/50/3.0 90/50/4.0
300/200/6.3 400/300/12.0 70/50/4.0 90/50/5.0
300/200/8.0 400/300/12.5 70/50/5.0

Profile library Checked sections Section data 75

VHP

Formcode 2
Description Voest structural hollow section (square and
rectangular)
(Voest-HohlProfile)
Source VHP- Technische Daten
Voest-Alpine Krems
04/99
pp.3-9
Revision date 20/10/99
By CVL
PBD file VHP.PBD
Code EN 10219
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy ix : Radius of gyration
3 iz iy : Radius of gyration
8 Iy Jx : Second Moment of Area
9 Iz Jy : Second Moment of Area
10 Wy Wx : Elastic section modulus
11 Wz Wy :Elastic section modulus
13 Wt WD : Torsional modulus constant
14 It JD : Torsional inertia constant
32 G G :Mass

Profile library Checked sections Section data 76

Checked variables

SCIA Source
symbol symbol
B b
H a
S t
R R

Checked sections

100/100x10.0 110/110x7.0 120/80x3.0 140/60x3.0

100/100x3.0 110/110x8.0 120/80x4.0 140/60x4.0
100/100x4.0 120/100x10.0 120/80x5.0 140/60x5.0
100/100x5.0 120/100x3.0 120/80x6.0 140/60x6.0
100/100x6.0 120/100x4.0 120/80x7.0 140/70x3.0
100/100x7.0 120/100x5.0 120/80x8.0 140/70x4.0
100/100x8.0 120/100x6.0 125/125x10.0 140/70x5.0
100/40x3.0 120/100x7.0 125/125x3.0 140/70x6.0
100/40x4.0 120/100x8.0 125/125x4.0 140/80x10.0
100/40x5.0 120/120x10.0 125/125x5.0 140/80x3.0
100/50x3.0 120/120x3.0 125/125x6.0 140/80x4.0
100/50x4.0 120/120x4.0 125/125x7.0 140/80x5.0
100/50x5.0 120/120x5.0 125/125x8.0 140/80x6.0
100/50x6.0 120/120x6.0 127/127x10.0 140/80x7.0
100/60x3.0 120/120x7.0 130/130x10.0 140/80x8.0
100/60x3.5 120/120x8.0 140/100x3.0 150/100x10.0
100/60x4.0 120/40x3.0 140/100x4.0 150/100x3.0
100/60x5.0 120/40x4.0 140/100x5.0 150/100x4.0
100/60x6.0 120/50x3.0 140/100x6.0 150/100x5.0
100/80x3.0 120/50x4.0 140/100x8.0 150/100x6.0
100/80x4.0 120/50x5.0 140/140x10.0 150/100x7.0
100/80x5.0 120/50x6.0 140/140x3.0 150/100x8.0
100/80x6.0 120/60x3.0 140/140x4.0 150/120x10.0
110/110x10.0 120/60x3.5 140/140x5.0 150/120x3.0
110/110x3.0 120/60x4.0 140/140x6.0 150/120x4.0
110/110x4.0 120/60x5.0 140/140x7.0 150/120x5.0
110/110x5.0 120/60x6.0 140/140x8.0 150/120x6.0
110/110x6.0 120/60x7.0 140/50x3.0 150/120x8.0

Profile library Checked sections Section data 77

150/150x10.0 160/80x7.0 20/20x2.0 220/140x10.0
150/150x3.0 160/80x8.0 200/100x10.0 220/140x5.0
150/150x4.0 160/90x10.0 200/100x3.0 220/140x6.0
150/150x5.0 160/90x3.0 200/100x4.0 220/140x7.0
150/150x6.0 160/90x4.0 200/100x5.0 220/140x8.0
150/150x7.0 160/90x5.0 200/100x6.0 220/220x10.0
150/150x8.0 160/90x6.0 200/100x7.0 220/220x6.0
150/50x3.0 160/90x7.0 200/100x8.0 220/220x7.0
150/50x4.0 160/90x8.0 200/120x10.0 220/220x8.0
150/50x5.0 165/88x5.0 200/120x4.0 25/25x2.0
150/50x6.0 166/88x10.0 200/120x5.0 25/25x2.5
150/75x3.0 180/100X6.0 200/120x6.0 25/25x3.0
150/75x4.0 180/100x10.0 200/120x7.0 250/100x10.0
150/75x5.0 180/100x3.0 200/120x8.0 250/100x4.0
150/75x6.0 180/100x4.0 200/150x10.0 250/100x5.0
150/75x7.0 180/100x5.0 200/150x4.0 250/100x6.0
150/75x8.0 180/100x7.0 200/150x5.0 250/100x8.0
152.4/101.6x10 180/100x8.0 200/150x6.0 250/150x10.0
.0 180/100x8.8 200/150x7.0 250/150x5.0
152.4/152.4x10.0 180/120x10.0 200/150x8.0 250/150x6.0
160/100x10.0 180/120x3.0 200/200x10.0 250/150x7.0
160/100x3.0 180/120x4.0 200/200x5.0 250/150x8.0
160/100x4.0 180/120x5.0 200/200x6.0 260/140x10.0
160/100x5.0 180/120x6.0 200/200x7.0 260/140x5.0
160/100x6.0 180/120x8.0 200/200x8.0 260/140x6.0
160/100x8.0 180/180x10.0 200/80x10.0 260/140x8.0
160/120x10.0 180/180x5.0 200/80x3.0 28/28x4.0
160/160x10.0 180/180x6.0 200/80x4.0 30/30x2.5
160/160x4.0 180/180x7.0 200/80x5.0 30/30x3.0
160/160x6.0 180/180x8.0 200/80x6.0 30/30x4.0
160/160x7.0 180/180x8.8 200/80x8.0 40/20x3.0
160/160x8.0 180/80x10.0 220/120x10.0 40/30x3.0
160/80x10.0 180/80x3.0 220/120x4.0 40/40x2.0
160/80x3.0 180/80x4.0 220/120x5.0 40/40x2.5
160/80x4.0 180/80x5.0 220/120x6.0 40/40x3.0
160/80x5.0 180/80x6.0 220/120x7.0 40/40x4.0
160/80x6.0 180/80x8.0 220/120x8.0 40/40x5.0

Profile library Checked sections Section data 78

50/20x2.0 60/40x5.0 70/70x5.0 80/80x4.0
50/25x2.0 60/50x3.0 70/70x6.0 80/80x5.0
50/25x2.5 60/50x4.0 70/70x7.0 80/80x6.0
50/25x3.0 60/50x5.0 75/50x3.0 80/80x7.0
50/30x2.5 60/60x3.0 80/30x3.0 80/80x8.0
50/30x3.0 60/60x3.5 80/30x4.0 90/50x3.0
50/30x4.0 60/60x4.0 80/40x3.0 90/50x5.0
50/40x3.0 60/60x5.0 80/40x4.0 90/50x6.0
50/50x2.5 60/60x6.0 80/40x5.0 90/60x6.0
50/50x3.0 70/40x4.0 80/50x3.0 90/90x3.0
50/50x4.0 70/40x5.0 80/50x4.0 90/90x3.5
50/50x5.0 70/50x3.0 80/50x5.0 90/90x4.0
60/30x2.0 70/50x4.0 80/50x6.0 90/90x5.0
60/30x3.0 70/50x5.0 80/60x4.0 90/90x6.0
60/30x4.0 70/50x6.0 80/60x5.0 90/90x7.0
60/40x2.0 70/70x3.0 80/60x6.0 90/90x8.0
60/40x3.0 70/70x3.5 80/80x3.0
60/40x4.0 70/70x4.0 80/80x3.5

Profile library Checked sections Section data 79

MSH

Formcode 2
Description Mannesmann structural hollow section (square and
rectangular)
Source Structural hollow sections (MSH)
circular square rectangular
Vallourec & Mannesmann Tubes
Edition 1998
pp.29-45
Revision date 20/10/99
By CVL
PBD file MSH.PBD
Code EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy ixx : Radius of gyration
3 iz iyy : Radius of gyration
8 Iy Ixx : Second Moment of Area
9 Iz Ixx : Second Moment of Area
10 Wy Welxx : Elastic section modulus
11 Wz Welyy :Elastic section modulus
13 Wt Ct : Torsional modulus constant
14 It Jt : Torsional inertia constant
20 V0 As : Surficial area
32 G M :Mass

Profile library Checked sections Section data 80

Checked variables

SCIA Source
symbol symbol
B B
H H
S T
R 1.5*T
R1 0.5*T

Checked sections

100x100x10.0 100x60x12.5 110x110x4.5 120x120x5.0

100x100x11.0 100x60x3.6 110x110x5.0 120x120x5.6
100x100x12.5 100x60x4.0 110x110x5.6 120x120x6.3
100x100x14.2 100x60x4.5 110x110x6.3 120x120x7.1
100x100x4.0 100x60x5.0 110x110x7.1 120x120x8.0
100x100x4.5 100x60x5.6 110x110x8.0 120x120x8.8
100x100x5.0 100x60x6.3 110x110x8.8 120x60x10.0
100x100x5.6 100x60x7.1 110x60x10.0 120x60x11.0
100x100x6.3 100x60x8.0 110x60x11.0 120x60x12.5
100x100x7.1 100x60x8.8 110x60x12.5 120x60x3.6
100x100x8.0 100x80x10.0 110x60x3.6 120x60x4.0
100x100x8.8 100x80x11.0 110x60x4.0 120x60x4.5
100x50x10.0 100x80x12.5 110x60x4.5 120x60x5.0
100x50x11.0 100x80x4.0 110x60x5.0 120x60x5.6
100x50x12.5 100x80x4.5 110x60x5.6 120x60x6.3
100x50x3.6 100x80x5.0 110x60x6.3 120x60x7.1
100x50x4.0 100x80x5.6 110x60x7.1 120x60x8.0
100x50x4.5 100x80x6.3 110x60x8.0 120x60x8.8
100x50x5.0 100x80x7.1 110x60x8.8 120x80x10.0
100x50x5.6 100x80x8.0 120x120x10.0 120x80x11.0
100x50x6.3 100x80x8.8 120x120x11.0 120x80x12.5
100x50x7.1 110x110x10.0 120x120x12.5 120x80x14.2
100x50x8.0 110x110x11.0 120x120x14.2 120x80x4.0
100x50x8.8 110x110x12.5 120x120x16.0 120x80x4.5
100x60x10.0 110x110x14.2 120x120x4.0 120x80x5.0
100x60x11.0 110x110x4.0 120x120x4.5 120x80x5.6

Profile library Checked sections Section data 81

120x80x6.3 140x70x8.0 150x50x10.0 160x90x5.0
120x80x7.1 140x70x8.8 150x50x4.0 160x90x5.6
120x80x8.0 140x80x10.0 150x50x4.5 160x90x6.3
120x80x8.8 140x80x11.0 150x50x5.0 160x90x7.1
130x130x10.0 140x80x12.5 150x50x5.6 160x90x8.0
130x130x11.0 140x80x14.2 150x50x6.3 160x90x8.8
130x130x12.5 140x80x4.0 150x50x7.1 180x100x10.0
130x130x14.2 140x80x4.5 150x50x8.0 180x100x11.0
130x130x16.0 140x80x5.0 150x50x8.8 180x100x12.5
130x130x5.0 140x80x5.6 160x160x10.0 180x100x14.2
130x130x5.6 140x80x6.3 160x160x11.0 180x100x16.0
130x130x6.3 140x80x7.1 160x160x12.5 180x100x17.5
130x130x7.1 140x80x8.0 160x160x14.2 180x100x5.0
130x130x8.0 140x80x8.8 160x160x16.0 180x100x5.6
130x130x8.8 150x100x10.0 160x160x17.5 180x100x6.3
140x140x10.0 150x100x11.0 160x160x6.3 180x100x7.1
140x140x11.0 150x100x12.5 160x160x7.1 180x100x8.0
140x140x12.5 150x100x14.2 160x160x8.0 180x100x8.8
140x140x14.2 150x100x16.0 160x160x8.8 180x180x10.0
140x140x16.0 150x100x4.5 160x80x10.0 180x180x11.0
140x140x17.5 150x100x5.0 160x80x11.0 180x180x12.5
140x140x5.0 150x100x5.6 160x80x12.5 180x180x14.2
140x140x5.6 150x100x6.3 160x80x14.2 180x180x16.0
140x140x6.3 150x100x7.1 160x80x16.0 180x180x6.3
140x140x7.1 150x100x8.0 160x80x4.5 180x180x7.1
140x140x8.0 150x100x8.8 160x80x5.0 180x180x8.0
140x140x8.8 150x150x10.0 160x80x5.6 180x180x8.8
140x70x10.0 150x150x11.0 160x80x6.3 180x60x4.5
140x70x11.0 150x150x12.5 160x80x7.1 180x60x5.0
140x70x12.5 150x150x14.2 160x80x8.0 180x60x5.6
140x70x14.2 150x150x16.0 160x80x8.8 180x60x6.3
140x70x4.0 150x150x17.5 160x90x10.0 180x60x7.1
140x70x4.5 150x150x5.6 160x90x11.0 180x80x10.0
140x70x5.0 150x150x6.3 160x90x12.5 180x80x11.0
140x70x5.6 150x150x7.1 160x90x14.2 180x80x12.5
140x70x6.3 150x150x8.0 160x90x16.0 180x80x4.5
140x70x7.1 150x150x8.8 160x90x4.5 180x80x5.0

Profile library Checked sections Section data 82

180x80x5.6 200x200x12.5 250x150x12.5 260x260x12.5
180x80x6.3 200x200x14.2 250x150x14.2 260x260x14.2
180x80x7.1 200x200x16.0 250x150x16.0 260x260x16.0
180x80x8.0 200x200x6.3 250x150x6.3 260x260x17.5
180x80x8.8 200x200x7.1 250x150x7.1 260x260x6.3
200x100x10.0 200x200x8.0 250x150x8.0 260x260x7.1
200x100x11.0 200x200x8.8 250x150x8.8 260x260x8.0
200x100x12.5 220x120x10.0 250x250x10.0 260x260x8.8
200x100x14.2 220x120x11.0 250x250x11.0 280x250x10.0
200x100x16.0 220x120x12.5 250x250x12.5 280x250x11.0
200x100x17.5 220x120x14.2 250x250x14.2 280x250x12.5
200x100x5.6 220x120x16.0 250x250x16.0 280x250x14.2
200x100x6.3 220x120x17.5 250x250x17.5 280x250x16.0
200x100x7.1 220x120x6.3 250x250x6.3 280x250x6.3
200x100x8.0 220x120x7.1 250x250x7.1 280x250x7.1
200x100x8.8 220x120x8.0 250x250x8.0 280x250x8.0
200x120x10.0 220x120x8.8 250x250x8.8 280x250x8.8
200x120x11.0 220x220x10.0 260x140x10.0 300x100x10.0
200x120x12.5 220x220x11.0 260x140x11.0 300x100x11.0
200x120x14.2 220x220x12.5 260x140x12.5 300x100x12.5
200x120x16.0 220x220x14.2 260x140x14.2 300x100x14.2
200x120x17.5 220x220x16.0 260x140x16.0 300x100x16.0
200x120x6.3 220x220x6.3 260x140x6.3 300x100x6.3
200x120x7.1 220x220x7.1 260x140x7.1 300x100x7.1
200x120x8.0 220x220x8.0 260x140x8.0 300x100x8.0
200x120x8.8 220x220x8.8 260x140x8.8 300x100x8.8
200x150x10.0 250x100x10.0 260x180x10.0 300x150x10.0
200x150x11.0 250x100x11.0 260x180x11.0 300x150x11.0
200x150x12.5 250x100x12.5 260x180x12.5 300x150x12.5
200x150x14.2 250x100x14.2 260x180x14.2 300x150x7.1
200x150x16.0 250x100x16.0 260x180x16.0 300x150x8.0
200x150x6.3 250x100x6.3 260x180x6.3 300x150x8.8
200x150x7.1 250x100x7.1 260x180x7.1 300x200x10.0
200x150x8.0 250x100x8.0 260x180x8.0 300x200x11.0
200x150x8.8 250x100x8.8 260x180x8.8 300x200x12.5
200x200x10.0 250x150x10.0 260x260x10.0 300x200x14.2
200x200x11.0 250x150x11.0 260x260x11.0 300x200x16.0

Profile library Checked sections Section data 83

300x200x17.5 350x350x6.3 40x40x5.6 500x300x8.0
300x200x6.3 350x350x7.1 40x40x6.3 500x300x8.8
300x200x7.1 350x350x8.0 40x40x7.1 50x30x2.9
300x200x8.0 350x350x8.8 440x350x10.0 50x30x3.2
300x200x8.8 400x200x10.0 440x350x11.0 50x30x3.6
300x300x10.0 400x200x11.0 440x350x12.5 50x30x4.0
300x300x11.0 400x200x12.5 440x350x14.2 50x30x4.5
300x300x12.5 400x200x14.2 440x350x16.0 50x30x5.0
300x300x14.2 400x200x16.0 440x350x6.3 50x30x5.6
300x300x16.0 400x200x6.3 440x350x7.1 50x30x6.3
300x300x6.3 400x200x7.1 440x350x8.0 50x30x7.1
300x300x7.1 400x200x8.0 440x350x8.8 50x50x2.9
300x300x8.0 400x200x8.8 450x250x10.0 50x50x3.2
300x300x8.8 400x300x10.0 450x250x11.0 50x50x3.6
350x250x10.0 400x300x11.0 450x250x12.5 50x50x4.0
350x250x11.0 400x300x12.5 450x250x14.2 50x50x4.5
350x250x12.5 400x300x14.2 450x250x16.0 50x50x5.0
350x250x14.2 400x300x16.0 450x250x6.3 50x50x5.6
350x250x16.0 400x300x6.3 450x250x7.1 50x50x6.3
350x250x6.3 400x300x7.1 450x250x8.0 50x50x7.1
350x250x7.1 400x300x8.0 450x250x8.8 50x50x8.0
350x250x8.0 400x300x8.8 500x200x10.0 60x40x2.9
350x250x8.8 400x400x10.0 500x200x11.0 60x40x3.2
350x300x10.0 400x400x11.0 500x200x12.5 60x40x3.6
350x300x11.0 400x400x12.5 500x200x14.2 60x40x4.0
350x300x12.5 400x400x14.2 500x200x16.0 60x40x4.5
350x300x14.2 400x400x16.0 500x200x6.3 60x40x5.0
350x300x16.0 400x400x6.3 500x200x7.1 60x40x5.6
350x300x6.3 400x400x7.1 500x200x8.0 60x40x6.3
350x300x7.1 400x400x8.0 500x200x8.8 60x40x7.1
350x300x8.0 400x400x8.8 500x300x10.0 60x40x8.0
350x300x8.8 40x40x2.9 500x300x11.0 60x60x10.0
350x350x10.0 40x40x3.2 500x300x12.5 60x60x11.0
350x350x11.0 40x40x3.6 500x300x14.2 60x60x12.5
350x350x12.5 40x40x4.0 500x300x16.0 60x60x2.9
350x350x14.2 40x40x4.5 500x300x6.3 60x60x3.2
350x350x16.0 40x40x5.0 500x300x7.1 60x60x3.6

Profile library Checked sections Section data 84

60x60x4.0 70x70x3.6 80x60x11.0 90x90x10.0
60x60x4.5 70x70x4.0 80x60x12.5 90x90x11.0
60x60x5.0 70x70x4.5 80x60x3.2 90x90x12.5
60x60x5.6 70x70x5.0 80x60x3.6 90x90x3.6
60x60x6.3 70x70x5.6 80x60x4.0 90x90x4.0
60x60x7.1 70x70x6.3 80x60x4.5 90x90x4.5
60x60x8.0 70x70x7.1 80x60x5.0 90x90x5.0
60x60x8.8 70x70x8.0 80x60x5.6 90x90x5.6
70x40x10.0 70x70x8.8 80x60x6.3 90x90x6.3
70x40x2.9 80x40x10.0 80x60x7.1 90x90x7.1
70x40x3.2 80x40x11.0 80x60x8.0 90x90x8.0
70x40x3.6 80x40x12.5 80x60x8.8 90x90x8.8
70x40x4.0 80x40x2.9 80x80x10.0
70x40x4.5 80x40x3.2 80x80x11.0
70x40x5.0 80x40x3.6 80x80x12.5
70x40x5.6 80x40x4.0 80x80x3.6
70x40x6.3 80x40x4.5 80x80x4.0
70x40x7.1 80x40x5.0 80x80x4.5
70x40x8.0 80x40x5.6 80x80x5.0
70x40x8.8 80x40x6.3 80x80x5.6
70x50x10.0 80x40x7.1 80x80x6.3
70x50x11.0 80x40x8.0 80x80x7.1
70x50x12.5 80x40x8.8 80x80x8.0
70x50x3.2 80x50x10.0 80x80x8.8
70x50x3.6 80x50x11.0 90x50x10.0
70x50x4.0 80x50x12.5 90x50x11.0
70x50x4.5 80x50x3.2 90x50x12.5
70x50x5.0 80x50x3.6 90x50x3.2
70x50x5.6 80x50x4.0 90x50x3.6
70x50x6.3 80x50x4.5 90x50x4.0
70x50x7.1 80x50x5.0 90x50x4.5
70x50x8.0 80x50x5.6 90x50x5.0
70x50x8.8 80x50x6.3 90x50x5.6
70x70x10.0 80x50x7.1 90x50x6.3
70x70x11.0 80x50x8.0 90x50x7.1
70x70x12.5 80x50x8.8 90x50x8.0
70x70x3.2 80x60x10.0 90x50x8.8

Profile library Checked sections Section data 85

QRO

Formcode 2
Description Square Hollow Sections
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.137-140
pp.147
pp.150-153
pp.161

The nomenclature is according to

Materialbezeichnungen fr den Datenaustausch im

Stahlbau
Teil 1
Empfehlungen des DSTV-Arbeitsausschusses EDV
November 1997

Revision date 03/03/00

By GV, CVL
PBD file QRO.PBD
Code DIN 59410
z

Checked properties

Property SCIA Source

number symbol symbol (DIN1080)

Profile library Checked sections Section data 86

1 A0 A
2 iy iy
3 iz iy
8 Iy Iy
9 Iz Iy
10 Wy Wy
11 Wz Wy
13 Wt Wt
14 It It
20 V0 U
30 Mply Wpl x 240 N/mm
31 Mplz Wpl x 240 N/mm
32 G G

Checked variables

SCIA Source
symbol symbol
B a
H a
S t
R r
R1 r-t

Checked sections

Profile library Checked sections Section data 87

 110X8.8 140X4K 160X4K
100X10 110X8.8K 140X5 160X5.6
100X11 110X8K 140X5.6 160X5K
100X12.5 120X10 140X5K 160X6.3
100X3.2K 120X11 140X6.3 160X6.3K
100X3.6 120X12.5 140X6.3K 160X7.1
100X3K 120X3.2K 140X7.1 160X7K
100X4 120X3.6 140X7K 160X8
100X4.5 120X3K 140X8 160X8.8
100X4K 120X4 140X8.8 160X8.8K
100X5 120X4.5 140X8.8K 160X8K
100X5.6 120X4K 140X8K 180X10
100X5K 120X5 150X10 180X10K
100X6.3 120X5.6 150X10K 180X11
100X6.3K 120X5K 150X11 180X12.5
100X7.1 120X6.3 150X12.5 180X12.5K
100X7K 120X6.3K 150X14.2 180X14.2
100X8 120X7.1 150X16 180X16
100X8.8 120X7K 150X3K 180X4K
100X8.8K 120X8 150X4K 180X5K
100X8K 120X8.8 150X5.6 180X6.3
110X10 120X8.8K 150X5K 180X6.3K
110X11 120X8K 150X6.3 180X7.1
110X12.5 125X3K 150X6.3K 180X8
110X3.6 125X4K 150X7.1 180X8.8
110X3K 125X5K 150X7K 180X8K
110X4 125X6K 150X8 200X10
110X4.5 125X7K 150X8.8 200X10K
110X4K 125X8.8K 150X8.8K 200X11
110X5 125X8K 150X8K 200X12.5
110X5.6 140X10 160X10 200X12.5K
110X5K 140X10K 160X10K 200X14.2
110X6.3 140X11 160X11 200X16
110X6K 140X12.5 160X12.5 200X5K
110X7.1 140X14.2 160X14.2 200X6.3
110X7K 140X16 160X16 200X6.3K
110X8 140X3K 160X3K 200X7.1

Profile library Checked sections Section data 88

200X8 260X8 400X10K 50X5K
200X8.8 260X8.8 400X12.5 50X6
200X8K 260X8K 400X12.5K 55X2K
20X1.6K 280X10 400X16 55X3K
20X2K 280X10K 400X20 55X4K
220X10 280X12.5 400X8K 60X2.6K
220X10K 280X12.5K 40X1.6K 60X2.9
220X11 280X6.3K 40X2.6 60X2K
220X12.5 280X8 40X2.6K 60X3.2
220X12.5K 280X8K 40X2.9 60X3.2K
220X14.2 300X10K 40X2K 60X3.6
220X16 300X12.5K 40X3.2 60X3K
220X5K 300X6.3K 40X3.2K 60X4
220X6.3 300X8K 40X3.6 60X4.5
220X6.3K 30X1.6K 40X3K 60X4K
220X7.1 30X2.6K 40X4 60X5
220X8 30X2K 40X4.5 60X5.6
220X8.8 30X3K 40X4K 60X5K
220X8K 30X4K 40X5 60X6.3
250X10K 320X10 40X5.6 60X6.5
250X12.5K 320X10K 40X6 60X6K
250X5K 320X12.5 45X2K 70X10
250X6.3K 320X12.5K 45X3K 70X2.6K
250X8K 320X16 45X4K 70X3.2
25X1.5K 320X6.3K 50X1.6K 70X3.2K
25X2K 320X8K 50X2.6 70X3.6
260X10 350X10K 50X2.6K 70X3K
260X10K 350X12.5K 50X2.9 70X4
260X11 350X6.3K 50X2K 70X4.5
260X12.5 350X8K 50X3.2 70X4K
260X12.5K 35X1.5K 50X3.2K 70X5
260X14.2 35X2K 50X3.6 70X5.6
260X16 35X3K 50X4 70X5K
260X17.5 35X4K 50X4.5 70X6.3
260X5K 360X10 50X4K 70X6K
260X6.3K 360X12.5 50X5 70X7.1
260X7.1 360X16 50X5.6 70X8

Profile library Checked sections Section data 89

70X8.8 90X8K
80X10
80X2.6K
80X3.2
80X3.2K
80X3.6
80X3K
80X4
80X4.5
80X4K
80X5
80X5.6
80X5K
80X6.3
80X6.3K
80X7.1
80X7K
80X8
80X8.8
80X8K
90X10
90X3.2K
90X3.6
90X3K
90X4
90X4.5
90X4K
90X5
90X5.6
90X5K
90X6.3
90X6.3K
90X7.1
90X7K
90X8
90X8.8
90X8.8K

Profile library Checked sections Section data 90

RRO

Formcode 2
Description Rectangular Hollow Sections
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.141-146
pp.148-149
pp.154-160
pp.162-163

The nomenclature is according to

Materialbezeichnungen fr den Datenaustausch im

Stahlbau
Teil 1
Empfehlungen des DSTV-Arbeitsausschusses EDV
November 1997

Revision date 20/03/00

By FVI/CM
PBD file RRO.PBD
Code DIN 59410
z

Checked properties

Profile library Checked sections Section data 91

Property SCIA Source
number symbol symbol (DIN1080)
1 A0 A
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
13 Wt Wt
14 It It
20 V0 U
30 Mply Wply x 240 N/mm
31 Mplz Wplz x 240 N/mm
32 G G

Checked variables

SCIA Source
symbol symbol
B b
H a
S t
R r
R1 r-t

Checked sections

100X40X2K 100X50X5 100X60X3.2 100X60X7K

100X40X3K 100X50X5.6 100X60X3.2K 100X60X8
100X40X4K 100X50X5K 100X60X3.6 100X60X8.8
100X40X5K 100X50X6.3 100X60X4 100X60X8K
100X50X10 100X50X6K 100X60X4.5 100X70X3K
100X50X2K 100X50X7.1 100X60X4K 100X70X4K
100X50X3.2 100X50X7K 100X60X5 100X70X5K
100X50X3.6 100X50X8 100X60X5.6 100X70X6K
100X50X3K 100X50X8.8 100X60X5K 100X70X7K
100X50X4 100X50X8K 100X60X6.3 100X70X8.8K
100X50X4.5 100X60X10 100X60X6.3K 100X70X8K
100X50X4K 100X60X2.6K 100X60X7.1 100X80X3K

Profile library Checked sections Section data 92

100X80X4K 120X50X6K 140X60X5K 140X80X8K
100X80X5K 120X60X10 140X60X6K 150X100X10
100X80X6K 120X60X3.2K 140X60X7K 150X100X11
100X80X7K 120X60X3.6 140X60X8.8K 150X100X12.5
100X80X8.8K 120X60X4 140X60X8K 150X100X3.2K
100X80X8K 120X60X4.5 140X70X10 150X100X3.6
110X60X10 120X60X4K 140X70X11 150X100X4
110X60X3.2 120X60X5 140X70X12.5 150X100X4.5
110X60X3.6 120X60X5.6 140X70X3.6 150X100X4K
110X60X4 120X60X5K 140X70X3K 150X100X5
110X60X4.5 120X60X6.3 140X70X4 150X100X5.6
110X60X5 120X60X6.3K 140X70X4.5 150X100X5K
110X60X5.6 120X60X7.1 140X70X4K 150X100X6.3
110X60X6.3 120X60X7K 140X70X5 150X100X6.3K
110X60X7.1 120X60X8 140X70X5.6 150X100X7.1
110X60X8 120X60X8.8 140X70X5K 150X100X7K
110X60X8.8 120X60X8.8K 140X70X6.3 150X100X8
110X70X3.2K 120X60X8K 140X70X6K 150X100X8.8
110X70X4K 120X80X10 140X70X7.1 150X100X8.8K
110X70X5K 120X80X11 140X70X7K 150X100X8K
110X70X6.3K 120X80X12.5 140X70X8 150X40X3K
120X100X3K 120X80X3.2K 140X70X8.8 150X40X4K
120X100X4K 120X80X3.6 140X70X8.8K 150X40X5K
120X100X5K 120X80X4 140X70X8K 150X40X6K
120X100X6K 120X80X4.5 140X80X10 150X50X3K
120X100X7K 120X80X4K 140X80X11 150X50X4K
120X100X8.8K 120X80X5 140X80X12.5 150X50X5K
120X100X8K 120X80X5.6 140X80X3.2K 150X50X6K
120X110X3K 120X80X5K 140X80X3.6 150X75X3K
120X110X4K 120X80X6.3 140X80X4 150X75X4K
120X110X5K 120X80X6.3K 140X80X4.5 150X75X5K
120X110X6K 120X80X7.1 140X80X4K 150X75X6K
120X110X7K 120X80X7K 140X80X5 150X75X7K
120X110X8.8K 120X80X8 140X80X5.6 150X75X8.8K
120X110X8K 120X80X8.8 140X80X5K 150X75X8K
120X40X3K 120X80X8K 140X80X6.3 160X80X10
120X40X4K 140X40X3K 140X80X6.3K 160X80X11
120X40X5K 140X40X4K 140X80X7.1 160X80X12.5
120X40X6K 140X40X5K 140X80X7K 160X80X3.2K
120X50X3K 140X40X6K 140X80X8 160X80X3.6
120X50X4K 140X60X3K 140X80X8.8 160X80X4
120X50X5K 140X60X4K 140X80X8.8K 160X80X4.5

Profile library Checked sections Section data 93

160X80X4K 180X100X6.3 200X120X11 220X120X6K
160X80X5 180X100X6.3K 200X120X12.5 220X120X7.1
160X80X5.6 180X100X7.1 200X120X14.2 220X120X7K
160X80X5K 180X100X7K 200X120X16 220X120X8
160X80X6.3 180X100X8 200X120X4K 220X120X8.8
160X80X6.3K 180X100X8.8 200X120X5.6 220X120X8.8K
160X80X7.1 180X100X8.8K 200X120X5K 220X120X8K
160X80X7K 180X100X8K 200X120X6.3 220X140X10K
160X80X8 180X120X3K 200X120X6.3K 220X140X4K
160X80X8.8 180X120X4K 200X120X7.1 220X140X5K
160X80X8.8K 180X120X5K 200X120X7K 220X140X6.3K
160X80X8K 180X120X6K 200X120X8 220X140X8K
160X90X10 180X120X7K 200X120X8.8 220X80X3K
160X90X11 180X120X8.8K 200X120X8.8K 220X80X4K
160X90X12.5 180X120X8K 200X120X8K 220X80X5K
160X90X3.6 180X80X3K 200X150X3K 220X80X6K
160X90X3K 180X80X4K 200X150X4K 220X80X7K
160X90X4 180X80X5K 200X150X5K 220X80X8.8K
160X90X4.5 180X80X6K 200X150X6K 220X80X8K
160X90X4K 180X80X7K 200X150X7K 250X100X3K
160X90X5 180X80X8.8 200X150X8.8K 250X100X4K
160X90X5.6 180X80X8K 200X150X8K 250X100X5K
160X90X5K 200X100X10 200X40X3K 250X100X6K
160X90X6.3 200X100X10K 200X40X4K 250X100X7K
160X90X6K 200X100X11 200X40X5K 250X100X8.8K
160X90X7.1 200X100X12.5 200X40X6K 250X100X8K
160X90X7K 200X100X14.2 200X80X3K 250X150X10
160X90X8 200X100X16 200X80X4K 250X150X10K
160X90X8.8 200X100X3K 200X80X5K 250X150X11
160X90X8.8K 200X100X4K 200X80X6K 250X150X12.5
160X90X8K 200X100X5.6 200X80X7K 250X150X12.5K
180X100X10 200X100X5K 200X80X8.8K 250X150X14.2
180X100X10K 200X100X6.3 200X80X8K 250X150X16
180X100X11 200X100X6.3K 220X120X10 250X150X5K
180X100X12.5 200X100X7.1 220X120X11 250X150X6.3
180X100X14.2 200X100X7K 220X120X12.5 250X150X6.3K
180X100X16 200X100X8 220X120X14.2 250X150X7.1
180X100X3K 200X100X8.8 220X120X16 250X150X8
180X100X4K 200X100X8.8K 220X120X3K 250X150X8.8
180X100X5 200X100X8K 220X120X4K 250X150X8K
180X100X5.6 200X120X10 220X120X5K 260X140X10
180X100X5K 200X120X10K 220X120X6.3 260X140X11

Profile library Checked sections Section data 94

260X140X12.5 320X220X10 50X30X2.6 70X40X2K
260X140X14.2 320X220X12.5 50X30X2.6K 70X40X3.2
260X140X16 320X220X8.8 50X30X2.9 70X40X3.6
260X140X6.3 35X25X1.5K 50X30X2K 70X40X3K
260X140X7.1 35X25X2K 50X30X3.2 70X40X4
260X140X8 35X25X3K 50X30X3.2K 70X40X4.5
260X140X8.8 360X200X10K 50X30X3.6 70X40X4K
260X180X10 360X200X12.5K 50X30X4 70X40X5
260X180X10K 360X200X6.3K 50X30X4.5 70X40X5.6
260X180X11 360X200X8K 50X30X4K 70X40X6
260X180X12.5 360X220X10 50X30X5 70X50X2K
260X180X12.5K 360X220X12.5 50X30X5.6 70X50X3K
260X180X14.2 360X220X16 50X30X6 70X50X4K
260X180X16 400X200X10K 50X40X1.5K 80X30X2K
260X180X5K 400X200X12.5K 50X40X2K 80X30X3K
260X180X6.3 400X200X6.3K 50X40X3K 80X40X2.6K
260X180X6.3K 400X200X8K 50X40X4K 80X40X2.9
260X180X7.1 400X260X11 60X20X2K 80X40X2K
260X180X8 400X260X14.2 60X30X1.5K 80X40X3.2
260X180X8.8 400X260X17.5 60X30X2K 80X40X3.2K
260X180X8K 40X20X1.6K 60X30X3K 80X40X3.6
280X180X11 40X20X2.6K 60X30X4K 80X40X4
280X180X7.1 40X20X2K 60X40X1.6K 80X40X4.5
280X180X8.8 40X20X3K 60X40X2.6 80X40X4K
280X220X10 40X20X4K 60X40X2.6K 80X40X5
280X220X12.5 40X30X1.5K 60X40X2.9 80X40X5.6
280X220X8 40X30X2K 60X40X2K 80X40X5K
300X200X10K 40X30X3K 60X40X3.2 80X40X6.3
300X200X12.5K 450X250X10K 60X40X3.2K 80X40X6.5
300X200X5K 450X250X12.5K 60X40X3.6 80X40X6K
300X200X6.3K 450X250X6.3K 60X40X4 80X45X2K
300X200X8K 450X250X8K 60X40X4.5 80X50X2K
30X20X1.5K 45X25X1.5K 60X40X4K 80X50X3K
30X20X2K 45X25X2K 60X40X5 80X50X4K
30X20X3K 45X25X3K 60X40X5.6 80X50X5K
320X180X10 500X300X10K 60X40X5K 80X60X2K
320X180X12.5 500X300X12.5K 60X40X6 80X60X3K
320X180X8.8 500X300X8K 60X50X1.5K 80X60X4K
320X200X10K 50X20X1.5K 60X50X2K 80X60X5K
320X200X12.5K 50X20X2K 60X50X3K 80X60X6K
320X200X6.3K 50X20X3K 60X50X4K 85X40X2.5K
320X200X8K 50X30X1.5K 70X40X2.9 90X20X2K

Profile library Checked sections Section data 95

90X45X2K 90X50X3.2K 90X50X5.6 90X65X2.5K
90X45X3K 90X50X3.6 90X50X5K 90X70X3K
90X45X4K 90X50X4 90X50X6.3 90X70X4K
90X50X10 90X50X4.5 90X50X7.1 90X70X5K
90X50X2.6K 90X50X4K 90X50X8
90X50X3.2 90X50X5 90X50X8.8

HSS

Formcode 2
Description American Rectangular and Square Hollow Strcutural
Sections
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HSS.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx

Profile library Checked sections Section data 96

3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H d
S tnom
R 2*tnom
R1 tnom

Checked sections

101.6X101.6X12.7 101.6X63.5X6.4 114.3X114.3X9.5

101.6X101.6X3.2 101.6X63.5X7.9 127X101.6X12.7
101.6X101.6X4.8 101.6X76.2X3.2 127X101.6X4.8
101.6X101.6X6.4 101.6X76.2X4.8 127X101.6X6.4
101.6X101.6X7.9 101.6X76.2X6.4 127X101.6X7.9
101.6X101.6X9.5 101.6X76.2X7.9 127X101.6X9.5
101.6X50.8X3.2 101.6X76.2X9.5 127X127X12.7
101.6X50.8X4.8 114.3X114.3X12.7 127X127X3.2
101.6X50.8X6.4 114.3X114.3X3.2 127X127X4.8
101.6X50.8X7.9 114.3X114.3X4.8 127X127X6.4
101.6X50.8X9.5 114.3X114.3X6.4 127X127X7.9
101.6X63.5X4.8 114.3X114.3X7.9 127X127X9.5

Profile library Checked sections Section data 97

127X50.8X3.2 152.4X50.8X4.8 203.2X101.6X3.2
127X50.8X4.8 152.4X50.8X6.4 203.2X101.6X4.8
127X50.8X6.4 152.4X50.8X7.9 203.2X101.6X6.4
127X50.8X7.9 152.4X50.8X9.5 203.2X101.6X7.9
127X50.8X9.5 152.4X76.2X12.7 203.2X101.6X9.5
127X63.5X3.2 152.4X76.2X3.2 203.2X152.4X12.7
127X63.5X4.8 152.4X76.2X4.8 203.2X152.4X15.9
127X63.5X6.4 152.4X76.2X6.4 203.2X152.4X4.8
127X76.2X12.7 152.4X76.2X7.9 203.2X152.4X6.4
127X76.2X3.2 152.4X76.2X9.5 203.2X152.4X7.9
127X76.2X4.8 177.8X101.6X12.7 203.2X152.4X9.5
127X76.2X6.4 177.8X101.6X3.2 203.2X203.2X12.7
127X76.2X7.9 177.8X101.6X4.8 203.2X203.2X15.9
127X76.2X9.5 177.8X101.6X6.4 203.2X203.2X4.8
139.7X139.7X3.2 177.8X101.6X7.9 203.2X203.2X6.4
139.7X139.7X4.8 177.8X101.6X9.5 203.2X203.2X7.9
139.7X139.7X6.4 177.8X127X12.7 203.2X203.2X9.5
139.7X139.7X7.9 177.8X127X15.9 203.2X50.8X3.2
139.7X139.7X9.5 177.8X127X3.2 203.2X50.8X4.8
152.4X101.6X12.7 177.8X127X4.8 203.2X50.8X6.4
152.4X101.6X3.2 177.8X127X6.4 203.2X50.8X7.9
152.4X101.6X4.8 177.8X127X7.9 203.2X50.8X9.5
152.4X101.6X6.4 177.8X127X9.5 203.2X76.2X12.7
152.4X101.6X7.9 177.8X177.8X12.7 203.2X76.2X3.2
152.4X101.6X9.5 177.8X177.8X15.9 203.2X76.2X4.8
152.4X127X4.8 177.8X177.8X4.8 203.2X76.2X6.4
152.4X127X6.4 177.8X177.8X6.4 203.2X76.2X7.9
152.4X127X7.9 177.8X177.8X7.9 203.2X76.2X9.5
152.4X127X9.5 177.8X177.8X9.5 228.6X127X12.7
152.4X152.4X12.7 177.8X76.2X12.7 228.6X127X15.9
152.4X152.4X15.9 177.8X76.2X3.2 228.6X127X4.8
152.4X152.4X3.2 177.8X76.2X4.8 228.6X127X6.4
152.4X152.4X4.8 177.8X76.2X6.4 228.6X127X7.9
152.4X152.4X6.4 177.8X76.2X7.9 228.6X127X9.5
152.4X152.4X7.9 177.8X76.2X9.5 228.6X177.8X12.7
152.4X152.4X9.5 203.2X101.6X12.7 228.6X177.8X15.9
152.4X50.8X3.2 203.2X101.6X15.9 228.6X177.8X4.8

Profile library Checked sections Section data 98

228.6X177.8X6.4 254X50.8X7.9 304.8X76.2X4.8
228.6X177.8X7.9 254X50.8X9.5 304.8X76.2X6.4
228.6X177.8X9.5 254X76.2X3.2 304.8X76.2X7.9
228.6X76.2X12.7 254X76.2X4.8 304.8X88.9X7.9
228.6X76.2X4.8 254X76.2X6.4 304.8X88.9X9.5
228.6X76.2X6.4 254X76.2X7.9 31.8X31.8X3.2
228.6X76.2X7.9 254X76.2X9.5 31.8X31.8X4.8
228.6X76.2X9.5 254X88.9X4.8 355.6X101.6X12.7
254X101.6X12.7 304.8X101.6X12.7 355.6X101.6X15.9
254X101.6X15.9 304.8X101.6X15.9 355.6X101.6X4.8
254X101.6X4.8 304.8X101.6X4.8 355.6X101.6X6.4
254X101.6X6.4 304.8X101.6X6.4 355.6X101.6X7.9
254X101.6X7.9 304.8X101.6X7.9 355.6X101.6X9.5
254X101.6X9.5 304.8X101.6X9.5 355.6X152.4X12.7
254X127X4.8 304.8X152.4X12.7 355.6X152.4X15.9
254X127X6.4 304.8X152.4X15.9 355.6X152.4X4.8
254X127X7.9 304.8X152.4X4.8 355.6X152.4X6.4
254X127X9.5 304.8X152.4X6.4 355.6X152.4X7.9
254X152.4X12.7 304.8X152.4X7.9 355.6X152.4X9.5
254X152.4X15.9 304.8X152.4X9.5 355.6X254X12.7
254X152.4X4.8 304.8X203.2X12.7 355.6X254X15.9
254X152.4X6.4 304.8X203.2X15.9 355.6X254X6.4
254X152.4X7.9 304.8X203.2X4.8 355.6X254X7.9
254X152.4X9.5 304.8X203.2X6.4 355.6X254X9.5
254X203.2X12.7 304.8X203.2X7.9 355.6X304.8X12.7
254X203.2X4.8 304.8X203.2X9.5 355.6X304.8X9.5
254X203.2X6.4 304.8X254X12.7 355.6X355.6X12.7
254X203.2X7.9 304.8X254X6.4 355.6X355.6X15.9
254X203.2X9.5 304.8X254X7.9 355.6X355.6X7.9
254X254X12.7 304.8X254X9.5 355.6X355.6X9.5
254X254X15.9 304.8X304.8X12.7 38.1X38.1X3.2
254X254X4.8 304.8X304.8X15.9 38.1X38.1X4.8
254X254X6.4 304.8X304.8X6.4 406.4X101.6X12.7
254X254X7.9 304.8X304.8X7.9 406.4X101.6X7.9
254X254X9.5 304.8X304.8X9.5 406.4X101.6X9.5
254X50.8X4.8 304.8X50.8X4.8 406.4X203.2X12.7
254X50.8X6.4 304.8X50.8X6.4 406.4X203.2X15.9

Profile library Checked sections Section data 99

406.4X203.2X7.9 50.8X50.8X4.8 76.2X38.1X4.8
406.4X203.2X9.5 50.8X50.8X6.4 76.2X38.1X6.4
406.4X304.8X12.7 508X101.6X12.7 76.2X50.8X3.2
406.4X304.8X15.9 508X101.6X7.9 76.2X50.8X4.8
406.4X304.8X7.9 508X101.6X9.5 76.2X50.8X6.4
406.4X304.8X9.5 508X203.2X12.7 76.2X50.8X7.9
406.4X406.4X12.7 508X203.2X15.9 76.2X63.5X3.2
406.4X406.4X15.9 508X203.2X7.9 76.2X63.5X4.8
406.4X406.4X7.9 508X203.2X9.5 76.2X63.5X6.4
406.4X406.4X9.5 508X304.8X12.7 76.2X63.5X7.9
41.3X41.3X3.2 508X304.8X15.9 76.2X76.2X3.2
41.3X41.3X4.8 508X304.8X7.9 76.2X76.2X4.8
44.5X44.5X4.8 508X304.8X9.5 76.2X76.2X6.4
457.2X152.4X12.7 57.2X57.2X3.2 76.2X76.2X7.9
457.2X152.4X15.9 57.2X57.2X4.8 76.2X76.2X9.5
457.2X152.4X6.4 57.2X57.2X6.4 88.9X63.5X3.2
457.2X152.4X7.9 63.5X38.1X3.2 88.9X63.5X4.8
457.2X152.4X9.5 63.5X38.1X4.8 88.9X63.5X6.4
457.2X304.8X12.7 63.5X38.1X6.4 88.9X63.5X7.9
457.2X304.8X15.9 63.5X63.5X3.2 88.9X63.5X9.5
457.2X304.8X9.5 63.5X63.5X4.8 88.9X88.9X3.2
50.8X25.4X3.2 63.5X63.5X6.4 88.9X88.9X4.8
50.8X25.4X4.8 63.5X63.5X7.9 88.9X88.9X6.4
50.8X38.1X4.8 76.2X25.4X3.2 88.9X88.9X7.9
50.8X50.8X3.2 76.2X38.1X3.2 88.9X88.9X9.5

HSS(Imp)

Formcode 2
Description American Rectangular and Square Hollow Strcutural
Sections
Imperial naming convention

Profile library Checked sections Section data 100

Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HSS(Imp).PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Profile library Checked sections Section data 101

Checked variables

SCIA Source
symbol symbol
B b
H d
S tnom
R 2*tnom
R1 tnom

Checked sections

1-1/2X1-1/2X1/8 10X4X3/16 12X12X3/8

1-1/2X1-1/2X3/16 10X4X3/8 12X12X5/16
1-1/4X1-1/4X1/8 10X4X5/16 12X12X5/8
1-1/4X1-1/4X3/16 10X4X5/8 12X2X1/4
1-3/4X1-3/4X3/16 10X5X1/4 12X2X3/16
1-5/8X1-5/8X1/8 10X5X3/16 12X3-1/2X3/8
1-5/8X1-5/8X3/16 10X5X3/8 12X3-1/2X5/16
10X10X1/2 10X5X5/16 12X3X1/4
10X10X1/4 10X6X1/2 12X3X3/16
10X10X3/16 10X6X1/4 12X3X5/16
10X10X3/8 10X6X3/16 12X4X1/2
10X10X5/16 10X6X3/8 12X4X1/4
10X10X5/8 10X6X5/16 12X4X3/16
10X2X1/4 10X6X5/8 12X4X3/8
10X2X3/16 10X8X1/2 12X4X5/16
10X2X3/8 10X8X1/4 12X4X5/8
10X2X5/16 10X8X3/16 12X6X1/2
10X3-1/2X3/16 10X8X3/8 12X6X1/4
10X3X1/4 10X8X5/16 12X6X3/16
10X3X1/8 12X10X1/2 12X6X3/8
10X3X3/16 12X10X1/4 12X6X5/16
10X3X3/8 12X10X3/8 12X6X5/8
10X3X5/16 12X10X5/16 12X8X1/2
10X4X1/2 12X12X1/2 12X8X1/4
10X4X1/4 12X12X1/4 12X8X3/16

Profile library Checked sections Section data 102

12X8X3/8 16X8X1/2 2X2X1/8
12X8X5/16 16X8X3/8 2X2X3/16
12X8X5/8 16X8X5/16 3-1/2X2-1/2X1/4
14X10X1/2 16X8X5/8 3-1/2X2-1/2X1/8
14X10X1/4 18X12X1/2 3-1/2X2-1/2X3/16
14X10X3/8 18X12X3/8 3-1/2X2-1/2X3/8
14X10X5/16 18X12X5/8 3-1/2X2-1/2X5/16
14X10X5/8 18X6X1/2 3-1/2X3-1/2X1/4
14X12X1/2 18X6X1/4 3-1/2X3-1/2X1/8
14X12X3/8 18X6X3/8 3-1/2X3-1/2X3/16
14X14X1/2 18X6X5/16 3-1/2X3-1/2X3/8
14X14X3/8 18X6X5/8 3-1/2X3-1/2X5/16
14X14X5/16 2-1/2X1-1/2X1/4 3X1-1/2X1/4
14X14X5/8 2-1/2X1-1/2X1/8 3X1-1/2X1/8
14X4X1/2 2-1/2X1-1/2X3/16 3X1-1/2X3/16
14X4X1/4 2-1/2X2-1/2X1/4 3X1X1/8
14X4X3/16 2-1/2X2-1/2X1/8 3X2-1/2X1/4
14X4X3/8 2-1/2X2-1/2X3/16 3X2-1/2X1/8
14X4X5/16 2-1/2X2-1/2X5/16 3X2-1/2X3/16
14X4X5/8 2-1/4X2-1/4X1/4 3X2-1/2X5/16
14X6X1/2 2-1/4X2-1/4X1/8 3X2X1/4
14X6X1/4 2-1/4X2-1/4X3/16 3X2X1/8
14X6X3/16 20X12X1/2 3X2X3/16
14X6X3/8 20X12X3/8 3X2X5/16
14X6X5/16 20X12X5/16 3X3X1/4
14X6X5/8 20X12X5/8 3X3X1/8
16X12X1/2 20X4X1/2 3X3X3/16
16X12X3/8 20X4X3/8 3X3X3/8
16X12X5/16 20X4X5/16 3X3X5/16
16X12X5/8 20X8X1/2 4-1/2X4-1/2X1/2
16X16X1/2 20X8X3/8 4-1/2X4-1/2X1/4
16X16X3/8 20X8X5/16 4-1/2X4-1/2X1/8
16X16X5/16 20X8X5/8 4-1/2X4-1/2X3/16
16X16X5/8 2X1-1/2X3/16 4-1/2X4-1/2X3/8
16X4X1/2 2X1X1/8 4-1/2X4-1/2X5/16
16X4X3/8 2X1X3/16 4X2-1/2X1/4
16X4X5/16 2X2X1/4 4X2-1/2X3/16

Profile library Checked sections Section data 103

4X2-1/2X5/16 5X4X1/4 6X6X5/8
4X2X1/4 5X4X3/16 7X3X1/2
4X2X1/8 5X4X3/8 7X3X1/4
4X2X3/16 5X4X5/16 7X3X1/8
4X2X3/8 5X5X1/2 7X3X3/16
4X2X5/16 5X5X1/4 7X3X3/8
4X3X1/4 5X5X1/8 7X3X5/16
4X3X1/8 5X5X3/16 7X4X1/2
4X3X3/16 5X5X3/8 7X4X1/4
4X3X3/8 5X5X5/16 7X4X1/8
4X3X5/16 6X2X1/4 7X4X3/16
4X4X1/2 6X2X1/8 7X4X3/8
4X4X1/4 6X2X3/16 7X4X5/16
4X4X1/8 6X2X3/8 7X5X1/2
4X4X3/16 6X2X5/16 7X5X1/4
4X4X3/8 6X3X1/2 7X5X1/8
4X4X5/16 6X3X1/4 7X5X3/16
5-1/2X5-1/2X1/4 6X3X1/8 7X5X3/8
5-1/2X5-1/2X1/8 6X3X3/16 7X5X5/16
5-1/2X5-1/2X3/16 6X3X3/8 7X5X5/8
5-1/2X5-1/2X3/8 6X3X5/16 7X7X1/2
5-1/2X5-1/2X5/16 6X4X1/2 7X7X1/4
5X2-1/2X1/4 6X4X1/4 7X7X3/16
5X2-1/2X1/8 6X4X1/8 7X7X3/8
5X2-1/2X3/16 6X4X3/16 7X7X5/16
5X2X1/4 6X4X3/8 7X7X5/8
5X2X1/8 6X4X5/16 8X2X1/4
5X2X3/16 6X5X1/4 8X2X1/8
5X2X3/8 6X5X3/16 8X2X3/16
5X2X5/16 6X5X3/8 8X2X3/8
5X3X1/2 6X5X5/16 8X2X5/16
5X3X1/4 6X6X1/2 8X3X1/2
5X3X1/8 6X6X1/4 8X3X1/4
5X3X3/16 6X6X1/8 8X3X1/8
5X3X3/8 6X6X3/16 8X3X3/16
5X3X5/16 6X6X3/8 8X3X3/8
5X4X1/2 6X6X5/16 8X3X5/16

Profile library Checked sections Section data 104

8X4X1/2
8X4X1/4
8X4X1/8
8X4X3/16
8X4X3/8
8X4X5/16
8X4X5/8
8X6X1/2
8X6X1/4
8X6X3/16
8X6X3/8
8X6X5/16
8X6X5/8
8X8X1/2
8X8X1/4
8X8X3/16
8X8X3/8
8X8X5/16
8X8X5/8
9X3X1/2
9X3X1/4
9X3X3/16
9X3X3/8
9X3X5/16
9X5X1/2
9X5X1/4
9X5X3/16
9X5X3/8
9X5X5/16
9X5X5/8
9X7X1/2
9X7X1/4
9X7X3/16
9X7X3/8
9X7X5/16
9X7X5/8

Profile library Checked sections Section data 105

CIRCULAR HOLLOW SECTIONS

MSRR

Formcode 3
Description Mannesmann structural hollow section (circular)
Source Structural hollow sections (MSH)
circular square rectangular
Vallourec & Mannesmann Tubes
Edition 1998
pp.10-28
Revision date 207/10/99
By CVL
PBD file MSRR.PBD
Code EN 10210-2
z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy i : Radius of gyration
8 Iy I : Second Moment of Area
10 Wy Wel : Elastic section modulus
13 Wt Ct : Torsional modulus constant
14 It Jt : Torsional inertia constant
20 V0 As : Surficial area

Profile library Checked sections Section data 106

32 G M :Mass

Checked variables

SCIA Source
symbol symbol
D D
s T

Checked sections

101.6x10.0 108.0x4.0 127.0x11.0 139.7x36.0

101.6x11.0 108.0x4.5 127.0x12.5 139.7x4.0
101.6x12.5 108.0x5.0 127.0x14.2 139.7x4.5
101.6x14.2 108.0x5.6 127.0x16.0 139.7x40.0
101.6x16.0 108.0x6.3 127.0x17.5 139.7x45.0
101.6x17.5 108.0x7.1 127.0x20.0 139.7x5.0
101.6x20.0 108.0x8.0 127.0x25.0 139.7x5.6
101.6x25.0 108.0x8.8 127.0x30.0 139.7x50.0
101.6x3.6 114.3x10.0 127.0x36.0 139.7x6.3
101.6x30.0 114.3x11.0 127.0x4.0 139.7x7.1
101.6x4.0 114.3x12.5 127.0x4.5 139.7x8.0
101.6x4.5 114.3x14.2 127.0x40.0 139.7x8.8
101.6x5.0 114.3x16.0 127.0x45.0 152.4x10.0
101.6x5.6 114.3x17.5 127.0x5.0 152.4x11.0
101.6x6.3 114.3x20.0 127.0x5.6 152.4x12.5
101.6x7.1 114.3x25.0 127.0x6.3 152.4x14.2
101.6x8.0 114.3x3.6 127.0x7.1 152.4x16.0
101.6x8.8 114.3x30.0 127.0x8.0 152.4x17.5
108.0x10.0 114.3x36.0 127.0x8.8 152.4x20.0
108.0x11.0 114.3x4.0 139.7x10.0 152.4x25.0
108.0x12.5 114.3x4.5 139.7x11.0 152.4x30.0
108.0x14.2 114.3x5.0 139.7x12.5 152.4x36.0
108.0x16.0 114.3x5.6 139.7x14.2 152.4x4.5
108.0x17.5 114.3x6.3 139.7x16.0 152.4x40.0
108.0x20.0 114.3x7.1 139.7x17.5 152.4x45.0
108.0x25.0 114.3x8.0 139.7x20.0 152.4x5.0
108.0x3.6 114.3x8.8 139.7x25.0 152.4x5.6
108.0x30.0 127.0x10.0 139.7x30.0 152.4x50.0

Profile library Checked sections Section data 107

152.4x6.3 168.3x40.0 193.7x20.0 219.1x45.0
152.4x7.1 168.3x45.0 193.7x25.0 219.1x5.0
152.4x8.0 168.3x5.0 193.7x30.0 219.1x5.6
152.4x8.8 168.3x5.6 193.7x36.0 219.1x50.0
159.0x10.0 168.3x50.0 193.7x4.0 219.1x6.3
159.0x11.0 168.3x6.3 193.7x4.5 219.1x60.0
159.0x12.5 168.3x60.0 193.7x40.0 219.1x7.1
159.0x14.2 168.3x7.1 193.7x45.0 219.1x70.0
159.0x16.0 168.3x8.0 193.7x5.0 219.1x8.0
159.0x17.5 168.3x8.8 193.7x5.6 219.1x8.8
159.0x20.0 177.8x10.0 193.7x50.0 244.5x10.0
159.0x25.0 177.8x11.0 193.7x6.3 244.5x11.0
159.0x30.0 177.8x12.5 193.7x60.0 244.5x12.5
159.0x36.0 177.8x14.2 193.7x7.1 244.5x14.2
159.0x4.5 177.8x16.0 193.7x8.0 244.5x16.0
159.0x40.0 177.8x17.5 193.7x8.8 244.5x17.5
159.0x45.0 177.8x20.0 21.3x2.3 244.5x20.0
159.0x5.0 177.8x25.0 21.3x2.6 244.5x25.0
159.0x5.6 177.8x30.0 21.3x2.9 244.5x30.0
159.0x50.0 177.8x36.0 21.3x3.2 244.5x36.0
159.0x6.3 177.8x4.5 21.3x3.6 244.5x4.0
159.0x60.0 177.8x40.0 21.3x4.0 244.5x4.5
159.0x7.1 177.8x45.0 21.3x4.5 244.5x40.0
159.0x8.0 177.8x5.0 21.3x5.0 244.5x45.0
159.0x8.8 177.8x5.6 219.1x10.0 244.5x5.0
168.3x10.0 177.8x50.0 219.1x11.0 244.5x5.6
168.3x11.0 177.8x6.3 219.1x12.5 244.5x50.0
168.3x12.5 177.8x60.0 219.1x14.2 244.5x6.3
168.3x14.2 177.8x7.1 219.1x16.0 244.5x60.0
168.3x16.0 177.8x8.0 219.1x17.5 244.5x7.1
168.3x17.5 177.8x8.8 219.1x20.0 244.5x70.0
168.3x20.0 193.7x10.0 219.1x25.0 244.5x8.0
168.3x25.0 193.7x11.0 219.1x30.0 244.5x8.8
168.3x30.0 193.7x12.5 219.1x36.0 244.5x80.0
168.3x36.0 193.7x14.2 219.1x4.0 244.5x90.0
168.3x4.0 193.7x16.0 219.1x4.5 26.9x2.3
168.3x4.5 193.7x17.5 219.1x40.0 26.9x2.6

Profile library Checked sections Section data 108

26.9x2.9 273.0x20.0 298.5x80.0 33.7x7.1
26.9x3.2 273.0x25.0 298.5x90.0 33.7x8.0
26.9x3.6 273.0x30.0 323.9x10.0 355.6x10.0
26.9x4.0 273.0x36.0 323.9x100.0 355.6x100.0
26.9x4.5 273.0x4.5 323.9x11.0 355.6x11.0
26.9x5.0 273.0x40.0 323.9x12.5 355.6x12.5
26.9x5.6 273.0x45.0 323.9x14.2 355.6x14.2
26.9x6.3 273.0x5.0 323.9x16.0 355.6x16.0
267.0x10.0 273.0x5.6 323.9x17.5 355.6x17.5
267.0x100.0 273.0x50.0 323.9x20.0 355.6x20.0
267.0x11.0 273.0x6.3 323.9x25.0 355.6x25.0
267.0x12.5 273.0x60.0 323.9x30.0 355.6x30.0
267.0x14.2 273.0x7.1 323.9x36.0 355.6x36.0
267.0x16.0 273.0x70.0 323.9x4.5 355.6x4.5
267.0x17.5 273.0x8.0 323.9x40.0 355.6x40.0
267.0x20.0 273.0x8.8 323.9x45.0 355.6x45.0
267.0x25.0 273.0x80.0 323.9x5.0 355.6x5.0
267.0x30.0 273.0x90.0 323.9x5.6 355.6x5.6
267.0x36.0 298.5x10.0 323.9x50.0 355.6x50.0
267.0x40.0 298.5x100.0 323.9x6.3 355.6x6.3
267.0x45.0 298.5x11.0 323.9x60.0 355.6x60.0
267.0x50.0 298.5x12.5 323.9x7.1 355.6x7.1
267.0x6.3 298.5x14.2 323.9x70.0 355.6x70.0
267.0x60.0 298.5x16.0 323.9x8.0 355.6x8.0
267.0x7.1 298.5x17.5 323.9x8.8 355.6x8.8
267.0x70.0 298.5x20.0 323.9x80.0 355.6x80.0
267.0x8.0 298.5x25.0 323.9x90.0 355.6x90.0
267.0x8.8 298.5x30.0 33.7x2.3 368.0x10.0
267.0x80.0 298.5x36.0 33.7x2.6 368.0x100.0
267.0x90.0 298.5x40.0 33.7x2.9 368.0x11.0
273.0x10.0 298.5x45.0 33.7x3.2 368.0x12.5
273.0x100.0 298.5x50.0 33.7x3.6 368.0x14.2
273.0x11.0 298.5x60.0 33.7x4.0 368.0x16.0
273.0x12.5 298.5x7.1 33.7x4.5 368.0x17.5
273.0x14.2 298.5x70.0 33.7x5.0 368.0x20.0
273.0x16.0 298.5x8.0 33.7x5.6 368.0x25.0
273.0x17.5 298.5x8.8 33.7x6.3 368.0x30.0

Profile library Checked sections Section data 109

368.0x36.0 406.4x5.6 42.4x5.6 48.3x4.5
368.0x40.0 406.4x50.0 42.4x6.3 48.3x5.0
368.0x45.0 406.4x6.3 42.4x7.1 48.3x5.6
368.0x50.0 406.4x60.0 42.4x8.0 48.3x6.3
368.0x60.0 406.4x7.1 42.4x8.8 48.3x7.1
368.0x70.0 406.4x70.0 457.0x10.0 48.3x8.0
368.0x8.0 406.4x8.0 457.0x100.0 48.3x8.8
368.0x8.8 406.4x8.8 457.0x11.0 508.0x10.0
368.0x80.0 406.4x80.0 457.0x12.5 508.0x100.0
368.0x90.0 406.4x90.0 457.0x14.2 508.0x11.0
38.0x10.0 419.0x10.0 457.0x16.0 508.0x12.5
38.0x2.6 419.0x100.0 457.0x17.5 508.0x14.2
38.0x2.9 419.0x11.0 457.0x20.0 508.0x16.0
38.0x3.2 419.0x12.5 457.0x25.0 508.0x17.5
38.0x3.6 419.0x14.2 457.0x30.0 508.0x20.0
38.0x4.0 419.0x16.0 457.0x36.0 508.0x25.0
38.0x4.5 419.0x17.5 457.0x40.0 508.0x30.0
38.0x5.0 419.0x20.0 457.0x45.0 508.0x36.0
38.0x5.6 419.0x25.0 457.0x5.0 508.0x40.0
38.0x6.3 419.0x30.0 457.0x5.6 508.0x45.0
38.0x7.1 419.0x36.0 457.0x50.0 508.0x50.0
38.0x8.0 419.0x40.0 457.0x6.3 508.0x6.3
38.0x8.8 419.0x45.0 457.0x60.0 508.0x60.0
406.4x10.0 419.0x50.0 457.0x7.1 508.0x7.1
406.4x100.0 419.0x60.0 457.0x70.0 508.0x70.0
406.4x11.0 419.0x70.0 457.0x8.0 508.0x8.0
406.4x12.5 419.0x80.0 457.0x8.8 508.0x8.8
406.4x14.2 419.0x90.0 457.0x80.0 508.0x80.0
406.4x16.0 42.4x10.0 457.0x90.0 508.0x90.0
406.4x17.5 42.4x11.0 48.3x10.0 51.0x10.0
406.4x20.0 42.4x2.6 48.3x11.0 51.0x11.0
406.4x25.0 42.4x2.9 48.3x12.5 51.0x12.5
406.4x30.0 42.4x3.2 48.3x2.6 51.0x14.2
406.4x36.0 42.4x3.6 48.3x2.9 51.0x2.6
406.4x40.0 42.4x4.0 48.3x3.2 51.0x2.9
406.4x45.0 42.4x4.5 48.3x3.6 51.0x3.2
406.4x5.0 42.4x5.0 48.3x4.0 51.0x3.6

Profile library Checked sections Section data 110

51.0x4.0 57.0x7.1 63.5x11.0 70.0x3.6
51.0x4.5 57.0x8.0 63.5x12.5 70.0x4.0
51.0x5.0 57.0x8.8 63.5x14.2 70.0x4.5
51.0x5.6 60.3x10.0 63.5x16.0 70.0x5.0
51.0x6.3 60.3x11.0 63.5x17.5 70.0x5.6
51.0x7.1 60.3x12.5 63.5x2.9 70.0x6.3
51.0x8.0 60.3x14.2 63.5x3.2 70.0x7.1
51.0x8.8 60.3x16.0 63.5x3.6 70.0x8.0
559.0x100.0 60.3x17.5 63.5x4.0 70.0x8.8
559.0x12.5 60.3x2.9 63.5x4.5 711.0x100.0
559.0x14.2 60.3x3.2 63.5x5.0 711.0x30.0
559.0x16.0 60.3x3.6 63.5x5.6 711.0x36.0
559.0x17.5 60.3x4.0 63.5x6.3 711.0x40.0
559.0x20.0 60.3x4.5 63.5x7.1 711.0x45.0
559.0x25.0 60.3x5.0 63.5x8.0 711.0x50.0
559.0x30.0 60.3x5.6 63.5x8.8 711.0x60.0
559.0x36.0 60.3x6.3 660.0x100.0 711.0x70.0
559.0x40.0 60.3x7.1 660.0x20.0 711.0x80.0
559.0x45.0 60.3x8.0 660.0x25.0 711.0x90.0
559.0x50.0 60.3x8.8 660.0x30.0 76.1x10.0
559.0x60.0 610.0x100.0 660.0x36.0 76.1x11.0
559.0x70.0 610.0x12.5 660.0x40.0 76.1x12.5
559.0x80.0 610.0x14.2 660.0x45.0 76.1x14.2
559.0x90.0 610.0x16.0 660.0x50.0 76.1x16.0
57.0x10.0 610.0x17.5 660.0x60.0 76.1x17.5
57.0x11.0 610.0x20.0 660.0x70.0 76.1x2.9
57.0x12.5 610.0x25.0 660.0x80.0 76.1x20.0
57.0x14.2 610.0x30.0 660.0x90.0 76.1x3.2
57.0x16.0 610.0x36.0 70.0x10.0 76.1x3.6
57.0x2.9 610.0x40.0 70.0x11.0 76.1x4.0
57.0x3.2 610.0x45.0 70.0x12.5 76.1x4.5
57.0x3.6 610.0x50.0 70.0x14.2 76.1x5.0
57.0x4.0 610.0x60.0 70.0x16.0 76.1x5.6
57.0x4.5 610.0x70.0 70.0x17.5 76.1x6.3
57.0x5.0 610.0x80.0 70.0x2.9 76.1x7.1
57.0x5.6 610.0x90.0 70.0x20.0 76.1x8.0
57.0x6.3 63.5x10.0 70.0x3.2 76.1x8.8

Profile library Checked sections Section data 111

82.5x10.0 82.5x3.6 88.9x10.0 88.9x3.6
82.5x11.0 82.5x4.0 88.9x11.0 88.9x4.0
82.5x12.5 82.5x4.5 88.9x12.5 88.9x4.5
82.5x14.2 82.5x5.0 88.9x14.2 88.9x5.0
82.5x16.0 82.5x5.6 88.9x16.0 88.9x5.6
82.5x17.5 82.5x6.3 88.9x17.5 88.9x6.3
82.5x20.0 82.5x7.1 88.9x20.0 88.9x7.1
82.5x25.0 82.5x8.0 88.9x25.0 88.9x8.0
82.5x3.2 82.5x8.8 88.9x3.2 88.9x8.8

Profile library Checked sections Section data 112

CHS

Formcode 3
Description Circular Hollow Sections
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.18-B.20
Revision date 07/10/99
By CADS
PBD file CHS.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy r : Radius of gyration
3 iz r : Radius of gyration
8 Iy I : Second Moment of Area
9 Iz I : Second Moment of Area
10 Wy Z : Elastic modulus
11 Wz Z : Elastic modulus
13 Wt C :Torsional constant
14 It J : Torsional constant J
20 V0 Surface area

Checked variables

SCIA Source

Profile library Checked sections Section data 113

symbol symbol
D D
s t

Checked sections

114.3/3.6 244.5/5.0 406.4/16.0 559.0/25.0

114.3/5.0 244.5/6.3 406.4/20.0 559.0/32.0
114.3/6.3 244.5/8.0 406.4/25.0 559.0/40.0
139.7/10.0 26.9/3.2 406.4/32.0 559.0/50.0
139.7/5.0 273.0/10.0 406.4/6.3 60.3/3.2
139.7/6.3 273.0/12.5 406.4/8.0 60.3/4.0
139.7/8.0 273.0/16.0 42.4/2.6 60.3/5.0
168.3/10.0 273.0/20.0 42.4/3.2 610.0/20.0
168.3/12.5 273.0/25.0 42.4/4.0 610.0/25.0
168.3/5.0 273.0/5.0 457.0/10.0 610.0/32.0
168.3/6.3 273.0/6.3 457.0/12.5 610.0/40.0
168.3/8.0 273.0/8.0 457.0/16.0 610.0/50.0
193.7/10.0 323.9/10.0 457.0/20.0 660.0/20.0
193.7/12.5 323.9/12.5 457.0/25.0 660.0/25.0
193.7/16.0 323.9/16.0 457.0/32.0 660.0/32.0
193.7/5.0 323.9/20.0 457.0/40.0 660.0/40.0
193.7/6.3 323.9/25.0 457.0/6.3 660.0/50.0
193.7/8.0 323.9/5.0 457.0/8.0 76.1/3.2
21.3/3.2 323.9/6.3 48.3/3.2 76.1/4.0
219.1/10.0 323.9/8.0 48.3/4.0 76.1/5.0
219.1/12.5 33.7/2.6 48.3/5.0 88.9/3.2
219.1/16.0 33.7/3.2 508.0/10.0 88.9/4.0
219.1/20.0 33.7/4.0 508.0/12.5 88.9/5.0
219.1/4.5 355.6/10.0 508.0/16.0
219.1/5.0 355.6/12.5 508.0/20.0
219.1/6.3 355.6/16.0 508.0/25.0
219.1/8.0 355.6/20.0 508.0/32.0
244.5/10.0 355.6/25.0 508.0/40.0
244.5/12.5 355.6/6.3 508.0/50.0
244.5/16.0 355.6/8.0 508.0/6.3
244.5/20.0 406.4/10.0 508.0/8.0
244.5/25.0 406.4/12.5 559.0/20.0

Profile library Checked sections Section data 114

CHSCF

Formcode 3
Description Circular Hollow Sections cold formed
Source BS EN 10219-2:1997
Cold formed welded structural hollow sections of non-
alloy and fine grain steels
Part 2.
pp.10-15
Revision date 07/10/99
By CADS
PBD file CHSCF.PBD
Code BS EN 10219-2:1997
z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Cross sectional area
2 iy i : Radius of gyration
3 iz i :Radius of gyration
8 Iy I : Second Moment of Area
9 Iz I :Second Moment of Area
10 Wy Wel :Elastic section modulus
11 Wz Wel :Elastic section modulus
13 Wt Ct : Torsional modulus constant
14 It It :Torsional inertia constant
20 V0 As : Superficial area

Checked variables

Profile library Checked sections Section data 115

SCIA Source
symbol symbol
D D
s t

Checked sections

101.6/2.0 1168.0/12.5 177.8/8.0 273.0/12.0

101.6/2.5 1168.0/16.0 193.7/10.0 273.0/12.5
101.6/3.0 1168.0/20.0 193.7/12.0 273.0/5.0
101.6/4.0 1168.0/25.0 193.7/12.5 273.0/6.0
101.6/5.0 1219.0/10.0 193.7/4.0 273.0/6.3
101.6/6.0 1219.0/12.0 193.7/5.0 273.0/8.0
101.6/6.3 1219.0/12.5 193.7/6.0 323.9/10.0
1016.0/10.0 1219.0/16.0 193.7/6.3 323.9/12.0
1016.0/12.0 1219.0/20.0 193.7/8.0 323.9/12.5
1016.0/12.5 1219.0/25.0 21.3/2.0 323.9/5.0
1016.0/16.0 139.7/10.0 21.3/2.5 323.9/6.0
1016.0/20.0 139.7/3.0 21.3/3.0 323.9/6.3
1016.0/25.0 139.7/4.0 219.1/10.0 323.9/8.0
1016.0/30.0 139.7/5.0 219.1/12.0 33.7/2.0
1016.0/8.0 139.7/6.0 219.1/12.5 33.7/2.5
1067.0/10.0 139.7/6.3 219.1/4.0 33.7/3.0
1067.0/12.0 139.7/8.0 219.1/5.0 355.6/10.0
1067.0/12.5 168.3/10.0 219.1/6.0 355.6/12.0
1067.0/16.0 168.3/3.0 219.1/6.3 355.6/12.5
1067.0/20.0 168.3/4.0 219.1/8.0 355.6/16.0
1067.0/25.0 168.3/5.0 244.5/10.0 355.6/20.0
1067.0/30.0 168.3/6.0 244.5/12.0 355.6/5.0
114.3/2.5 168.3/6.3 244.5/12.5 355.6/6.0
114.3/3.0 168.3/8.0 244.5/5.0 355.6/6.3
114.3/4.0 177.8/10.0 244.5/6.0 355.6/8.0
114.3/5.0 177.8/12.0 244.5/6.3 406.4/10.0
114.3/6.0 177.8/12.5 244.5/8.0 406.4/12.0
114.3/6.3 177.8/4.0 26.9/2.0 406.4/12.5
114.3/8.0 177.8/5.0 26.9/2.5 406.4/16.0
1168.0/10.0 177.8/6.0 26.9/3.0 406.4/20.0
1168.0/12.0 177.8/6.3 273.0/10.0 406.4/25.0

Profile library Checked sections Section data 116

406.4/6.0 610.0/10.0 813.0/10.0
406.4/6.3 610.0/12.0 813.0/12.0
406.4/8.0 610.0/12.5 813.0/12.5
42.4/2.0 610.0/16.0 813.0/16.0
42.4/2.5 610.0/20.0 813.0/20.0
42.4/3.0 610.0/25.0 813.0/25.0
42.4/4.0 610.0/30.0 813.0/30.0
457.0/10.0 610.0/6.0 813.0/8.0
457.0/12.0 610.0/6.3 88.9/2.0
457.0/12.5 610.0/8.0 88.9/2.5
457.0/16.0 711.0/10.0 88.9/3.0
457.0/20.0 711.0/12.0 88.9/4.0
457.0/25.0 711.0/12.5 88.9/5.0
457.0/30.0 711.0/16.0 88.9/6.0
457.0/6.0 711.0/20.0 88.9/6.3
457.0/6.3 711.0/25.0 914.0/10.0
457.0/8.0 711.0/30.0 914.0/12.0
48.3/2.0 711.0/6.0 914.0/12.5
48.3/2.5 711.0/6.3 914.0/16.0
48.3/3.0 711.0/8.0 914.0/20.0
48.3/4.0 76.1/2.0 914.0/25.0
48.3/5.0 76.1/2.5 914.0/30.0
508.0/10.0 76.1/3.0 914.0/8.0
508.0/12.0 76.1/4.0
508.0/12.5 76.1/5.0
508.0/16.0 76.1/6.0
508.0/20.0 76.1/6.3
508.0/25.0 762.0/10.0
508.0/30.0 762.0/12.0
508.0/6.0 762.0/12.5
508.0/6.3 762.0/16.0
508.0/8.0 762.0/20.0
60.3/2.0 762.0/25.0
60.3/2.5 762.0/30.0
60.3/3.0 762.0/6.0
60.3/4.0 762.0/6.3
60.3/5.0 762.0/8.0

Profile library Checked sections Section data 117

RO

Formcode 3
Description Circular hollow section
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.111-131

The nomenclature is according to

Materialbezeichnungen fr den Datenaustausch im

Stahlbau
Teil 1
Empfehlungen des DSTV-Arbeitsausschusses EDV
November 1997

Revision date 20/03/00

By GW/BR
PBD file RO.PBD
Code DIN 2448 / DIN 2458
z

Y y

Checked properties

Property SCIA Source

number symbol symbol (DIN 1080)
1 A0 A
2 iy i
8 Iy I

Profile library Checked sections Section data 118

10 Wy W
13 Wt 2W
14 It 2I
32 G G

Checked variables

SCIA Source
symbol symbol
D D
s s

Checked sections

10.2X1 101.6X4 1016X5.6 108X5

10.2X1.2 101.6X4.5 1016X6.3 108X5.6
10.2X1.4 101.6X5 1016X7.1 108X6.3
10.2X1.6 101.6X5.6 1016X8 108X7.1
10.2X1.8 101.6X6.3 1016X8.8 108X8
10.2X2 101.6X7.1 108X10 108X8.8
10.2X2.3 101.6X8 108X11 114.3X10
10.2X2.6 101.6X8.8 108X12.5 114.3X11
101.6X10 1016X10 108X14.2 114.3X12.5
101.6X11 1016X11 108X16 114.3X14.2
101.6X12.5 1016X12.5 108X17.5 114.3X16
101.6X14.2 1016X14.2 108X2 114.3X17.5
101.6X16 1016X16 108X2.3 114.3X2
101.6X17.5 1016X17.5 108X2.6 114.3X2.3
101.6X2 1016X20 108X2.9 114.3X2.6
101.6X2.3 1016X22.2 108X20 114.3X2.9
101.6X2.6 1016X25 108X22.2 114.3X20
101.6X2.9 1016X28 108X25 114.3X22.2
101.6X20 1016X30 108X28 114.3X25
101.6X22.2 1016X32 108X3.2 114.3X28
101.6X25 1016X36 108X3.6 114.3X3.2
101.6X28 1016X4.5 108X30 114.3X3.6
101.6X3.2 1016X40 108X4 114.3X30
101.6X3.6 1016X5 108X4.5 114.3X32

Profile library Checked sections Section data 119

114.3X4 13.5X1.4 139.7X11 152.4X20
114.3X4.5 13.5X1.6 139.7X12.5 152.4X22.2
114.3X5 13.5X1.8 139.7X14.2 152.4X25
114.3X5.6 13.5X2 139.7X16 152.4X28
114.3X6.3 13.5X2.3 139.7X17.5 152.4X3.2
114.3X7.1 13.5X2.6 139.7X2 152.4X3.6
114.3X8 13.5X2.9 139.7X2.3 152.4X30
114.3X8.8 13.5X3.2 139.7X2.6 152.4X32
127X10 13.5X3.6 139.7X2.9 152.4X36
127X11 133X10 139.7X20 152.4X4
127X12.5 133X11 139.7X22.2 152.4X4.5
127X14.2 133X12.5 139.7X25 152.4X40
127X16 133X14.2 139.7X28 152.4X45
127X17.5 133X16 139.7X3.2 152.4X5
127X2 133X17.5 139.7X3.6 152.4X5.6
127X2.3 133X2 139.7X30 152.4X6.3
127X2.6 133X2.3 139.7X32 152.4X7.1
127X2.9 133X2.6 139.7X36 152.4X8
127X20 133X2.9 139.7X4 152.4X8.8
127X22.2 133X20 139.7X4.5 159X10
127X25 133X22.2 139.7X40 159X11
127X28 133X25 139.7X5 159X12.5
127X3.2 133X28 139.7X5.6 159X14.2
127X3.6 133X3.2 139.7X6.3 159X16
127X30 133X3.6 139.7X7.1 159X17.5
127X32 133X30 139.7X8 159X2
127X36 133X32 139.7X8.8 159X2.3
127X4 133X36 152.4X10 159X2.6
127X4.5 133X4 152.4X11 159X2.9
127X5 133X4.5 152.4X12.5 159X20
127X5.6 133X5 152.4X14.2 159X22.2
127X6.3 133X5.6 152.4X16 159X25
127X7.1 133X6.3 152.4X17.5 159X28
127X8 133X7.1 152.4X2 159X3.2
127X8.8 133X8 152.4X2.3 159X3.6
13.5X1 133X8.8 152.4X2.6 159X30
13.5X1.2 139.7X10 152.4X2.9 159X32

Profile library Checked sections Section data 120

159X36 168.3X8.8 177.8X3.2 193.7X5
159X4 16X1 177.8X3.6 193.7X5.6
159X4.5 16X1.2 177.8X30 193.7X50
159X40 16X1.4 177.8X32 193.7X55
159X45 16X1.6 177.8X36 193.7X6.3
159X5 16X1.8 177.8X4 193.7X60
159X5.6 16X2 177.8X4.5 193.7X7.1
159X6.3 16X2.3 177.8X40 193.7X8
159X7.1 16X2.6 177.8X45 193.7X8.8
159X8 16X2.9 177.8X5 19X1
159X8.8 16X3.2 177.8X5.6 19X1.2
168.3X10 16X3.6 177.8X50 19X1.4
168.3X11 16X4 177.8X55 19X1.6
168.3X12.5 17.2X1 177.8X6.3 19X1.8
168.3X14.2 17.2X1.2 177.8X7.1 19X2
168.3X16 17.2X1.4 177.8X8 19X2.3
168.3X17.5 17.2X1.6 177.8X8.8 19X2.6
168.3X2.9 17.2X1.8 193.7X10 19X2.9
168.3X20 17.2X2 193.7X11 19X3.2
168.3X22.2 17.2X2.3 193.7X12.5 19X3.6
168.3X25 17.2X2.6 193.7X14.2 19X4
168.3X28 17.2X2.9 193.7X16 19X4.5
168.3X3.2 17.2X3.2 193.7X17.5 19X5
168.3X3.6 17.2X3.6 193.7X2.9 20X1
168.3X30 17.2X4 193.7X20 20X1.2
168.3X32 17.2X4.5 193.7X22.2 20X1.4
168.3X36 177.8X10 193.7X25 20X1.6
168.3X4 177.8X11 193.7X28 20X1.8
168.3X4.5 177.8X12.5 193.7X3.2 20X2
168.3X40 177.8X14.2 193.7X3.6 20X2.3
168.3X45 177.8X16 193.7X30 20X2.6
168.3X5 177.8X17.5 193.7X32 20X2.9
168.3X5.6 177.8X2.9 193.7X36 20X3.2
168.3X50 177.8X20 193.7X4 20X3.6
168.3X6.3 177.8X22.2 193.7X4.5 20X4
168.3X7.1 177.8X25 193.7X40 20X4.5
168.3X8 177.8X28 193.7X45 20X5

Profile library Checked sections Section data 121

21.3X1 219.1X6.3 25X1.4 273X20
21.3X1.2 219.1X60 25X1.6 273X22.2
21.3X1.4 219.1X65 25X1.8 273X25
21.3X1.6 219.1X7.1 25X2 273X28
21.3X1.8 219.1X8 25X2.3 273X3.2
21.3X2 219.1X8.8 25X2.6 273X3.6
21.3X2.3 244.5X10 25X2.9 273X30
21.3X2.6 244.5X11 25X3.2 273X32
21.3X2.9 244.5X12.5 25X3.6 273X36
21.3X3.2 244.5X14.2 25X4 273X4
21.3X3.6 244.5X16 25X4.5 273X4.5
21.3X4 244.5X17.5 25X5 273X40
21.3X4.5 244.5X20 25X5.6 273X45
21.3X5 244.5X22.2 25X6.3 273X5
219.1X10 244.5X25 26.9X1 273X5.6
219.1X11 244.5X28 26.9X1.2 273X50
219.1X12.5 244.5X3.2 26.9X1.4 273X55
219.1X14.2 244.5X3.6 26.9X1.6 273X6.3
219.1X16 244.5X30 26.9X1.8 273X60
219.1X17.5 244.5X32 26.9X2 273X65
219.1X20 244.5X36 26.9X2.3 273X7.1
219.1X22.2 244.5X4 26.9X2.6 273X8
219.1X25 244.5X4.5 26.9X2.9 273X8.8
219.1X28 244.5X40 26.9X3.2 298.5X10
219.1X3.2 244.5X45 26.9X3.6 298.5X11
219.1X3.6 244.5X5 26.9X4 298.5X12.5
219.1X30 244.5X5.6 26.9X4.5 298.5X14.2
219.1X32 244.5X50 26.9X5 298.5X16
219.1X36 244.5X55 26.9X5.6 298.5X17.5
219.1X4 244.5X6.3 26.9X6.3 298.5X20
219.1X4.5 244.5X60 26.9X7.1 298.5X22.2
219.1X40 244.5X65 273X10 298.5X25
219.1X45 244.5X7.1 273X11 298.5X28
219.1X5 244.5X8 273X12.5 298.5X3.2
219.1X5.6 244.5X8.8 273X14.2 298.5X3.6
219.1X50 25X1 273X16 298.5X30
219.1X55 25X1.2 273X17.5 298.5X32

Profile library Checked sections Section data 122

298.5X36 31.8X1.8 323.9X6.3 355.6X32
298.5X4 31.8X2 323.9X60 355.6X36
298.5X4.5 31.8X2.3 323.9X65 355.6X4
298.5X40 31.8X2.6 323.9X7.1 355.6X4.5
298.5X45 31.8X2.9 323.9X8 355.6X40
298.5X5 31.8X3.2 323.9X8.8 355.6X45
298.5X5.6 31.8X3.6 33.7X1 355.6X5
298.5X50 31.8X4 33.7X1.2 355.6X5.6
298.5X55 31.8X4.5 33.7X1.4 355.6X50
298.5X6.3 31.8X5 33.7X1.6 355.6X55
298.5X60 31.8X5.6 33.7X1.8 355.6X6.3
298.5X65 31.8X6.3 33.7X2 355.6X60
298.5X7.1 31.8X7.1 33.7X2.3 355.6X65
298.5X8 31.8X8 33.7X2.6 355.6X8
298.5X8.8 323.9X10 33.7X2.9 355.6X8.8
30X1 323.9X11 33.7X3.2 355X7.1
30X1.2 323.9X12.5 33.7X3.6 38X1
30X1.4 323.9X14.2 33.7X4 38X1.2
30X1.6 323.9X16 33.7X4.5 38X1.4
30X1.8 323.9X17.5 33.7X5 38X1.6
30X2 323.9X20 33.7X5.6 38X1.8
30X2.3 323.9X22.2 33.7X6.3 38X2
30X2.6 323.9X25 33.7X7.1 38X2.3
30X2.9 323.9X28 33.7X8 38X2.5
30X3.2 323.9X3.2 355.6X10 38X2.6
30X3.6 323.9X3.6 355.6X11 38X2.9
30X4 323.9X30 355.6X12.5 38X3.2
30X4.5 323.9X32 355.6X14.2 38X3.6
30X5 323.9X36 355.6X16 38X4
30X5.6 323.9X4 355.6X17.5 38X4.5
30X6.3 323.9X4.5 355.6X20 38X5
30X7.1 323.9X40 355.6X22.2 38X5.6
30X8 323.9X45 355.6X25 38X6.3
31.8X1 323.9X5 355.6X28 38X7.1
31.8X1.2 323.9X5.6 355.6X3.2 38X8
31.8X1.4 323.9X50 355.6X3.6 38X8.8
31.8X1.6 323.9X55 355.6X30 406.4X10

Profile library Checked sections Section data 123

406.4X11 42.4X3.6 457X20 48.3X5
406.4X12.5 42.4X4 457X22.2 48.3X5.6
406.4X14.2 42.4X4.5 457X25 48.3X6.3
406.4X16 42.4X5 457X28 48.3X7.1
406.4X17.5 42.4X5.6 457X3.6 48.3X8
406.4X20 42.4X6.3 457X30 48.3X8.8
406.4X22.2 42.4X7.1 457X32 508X10
406.4X25 42.4X8 457X36 508X11
406.4X28 42.4X8.8 457X4 508X12.5
406.4X3.6 44.5X1.2 457X4.5 508X14.2
406.4X30 44.5X1.4 457X40 508X16
406.4X32 44.5X1.5 457X45 508X17.5
406.4X36 44.5X1.6 457X5 508X20
406.4X4 44.5X1.8 457X5.6 508X22.2
406.4X4.5 44.5X10 457X50 508X25
406.4X40 44.5X11 457X55 508X28
406.4X45 44.5X2 457X6.3 508X3.6
406.4X5 44.5X2.3 457X60 508X30
406.4X5.6 44.5X2.5 457X65 508X32
406.4X50 44.5X2.6 457X7.1 508X36
406.4X55 44.5X2.9 457X8 508X4
406.4X6.3 44.5X3.2 457X8.8 508X4.5
406.4X60 44.5X3.6 48.3X1.2 508X40
406.4X65 44.5X4 48.3X1.4 508X45
406.4X7.1 44.5X4.5 48.3X1.6 508X5
406.4X8 44.5X5 48.3X1.8 508X5.6
406.4X8.8 44.5X5.6 48.3X10 508X50
42.4X1.2 44.5X6.3 48.3X11 508X55
42.4X1.4 44.5X7.1 48.3X12.5 508X6.3
42.4X1.6 44.5X8 48.3X2 508X60
42.4X1.8 44.5X8.8 48.3X2.3 508X65
42.4X10 457X10 48.3X2.6 508X7.1
42.4X2 457X11 48.3X2.9 508X8
42.4X2.3 457X12.5 48.3X3.2 508X8.8
42.4X2.6 457X14.2 48.3X3.6 51X1.2
42.4X2.9 457X16 48.3X4 51X1.4
42.4X3.2 457X17.5 48.3X4.5 51X1.6

Profile library Checked sections Section data 124

51X1.8 54X6.3 57X14.2 60.3X7.1
51X10 54X7.1 57X16 60.3X8
51X11 54X8 57X2 60.3X8.8
51X12.5 54X8.8 57X2.3 610X10
51X14.2 559X10 57X2.6 610X11
51X2 559X11 57X2.9 610X12.5
51X2.3 559X12.5 57X3 610X14.2
51X2.6 559X14.2 57X3.2 610X16
51X2.9 559X16 57X3.6 610X17.5
51X3.2 559X17.5 57X4 610X20
51X3.6 559X20 57X4.5 610X22.2
51X4 559X22.2 57X5 610X25
51X4.5 559X25 57X5.6 610X28
51X5 559X28 57X6.3 610X30
51X5.6 559X30 57X7.1 610X32
51X6.3 559X32 57X8 610X36
51X7.1 559X36 57X8.8 610X4.5
51X8 559X4.5 60.3X1.2 610X40
51X8.8 559X40 60.3X1.4 610X45
54X1.2 559X45 60.3X1.6 610X5
54X1.4 559X5 60.3X1.8 610X5.6
54X1.6 559X5.6 60.3X10 610X50
54X1.8 559X50 60.3X11 610X55
54X10 559X55 60.3X12.5 610X6.3
54X11 559X6.3 60.3X14.2 610X60
54X12.5 559X60 60.3X16 610X65
54X14.2 559X65 60.3X2 610X7.1
54X2 559X7.1 60.3X2.3 610X8
54X2.3 559X8 60.3X2.6 610X8.8
54X2.6 559X8.8 60.3X2.9 63.5X1.4
54X2.9 57X1.2 60.3X3.2 63.5X1.6
54X3.2 57X1.4 60.3X3.6 63.5X1.8
54X3.6 57X1.6 60.3X4 63.5X10
54X4 57X1.8 60.3X4.5 63.5X11
54X4.5 57X10 60.3X5 63.5X12.5
54X5 57X11 60.3X5.6 63.5X14.2
54X5.6 57X12.5 60.3X6.3 63.5X16

Profile library Checked sections Section data 125

63.5X2 660X60 711X30 76.1X14.2
63.5X2.3 660X65 711X32 76.1X16
63.5X2.6 660X7.1 711X4.5 76.1X17.5
63.5X2.9 660X8 711X5 76.1X2
63.5X3 660X8.8 711X5.6 76.1X2.3
63.5X3.2 70X1.6 711X6.3 76.1X2.6
63.5X3.6 70X1.8 711X7.1 76.1X2.9
63.5X4 70X10 711X8 76.1X20
63.5X4.5 70X11 711X8.8 76.1X3.2
63.5X5 70X12.5 73X1.6 76.1X3.6
63.5X5.6 70X14.2 73X1.8 76.1X4
63.5X6.3 70X16 73X10 76.1X4.5
63.5X6.5 70X17.5 73X11 76.1X5
63.5X7.1 70X2 73X12.5 76.1X5.6
63.5X8 70X2.3 73X14.2 76.1X6.3
63.5X8.8 70X2.6 73X16 76.1X7.1
660X10 70X2.9 73X17.5 76.1X8
660X11 70X3.2 73X2 76.1X8.8
660X12.5 70X3.6 73X2.3 762X10
660X14.2 70X4 73X2.6 762X11
660X16 70X4.5 73X2.9 762X12.5
660X17.5 70X5 73X3.2 762X14.2
660X20 70X5.6 73X3.6 762X16
660X22.2 70X6.3 73X4 762X17.5
660X25 70X7.1 73X4.5 762X20
660X28 70X8 73X5 762X22.2
660X30 70X8.8 73X5.6 762X25
660X32 711X10 73X6.3 762X28
660X36 711X11 73X7.1 762X30
660X4.5 711X12.5 73X8 762X32
660X40 711X14.2 73X8.8 762X36
660X45 711X16 76.1X1.6 762X4.5
660X5 711X17.5 76.1X1.8 762X5
660X5.6 711X20 76.1X10 762X5.6
660X50 711X22.2 76.1X11 762X6.3
660X55 711X25 76.1X12.5 762X7.1
660X6.3 711X28 76.1X14 762X8

Profile library Checked sections Section data 126

762X8.8 82.5X17.5 864X36 88.9X5.6
813X10 82.5X2 864X4.5 88.9X6.3
813X11 82.5X2.3 864X40 88.9X7.1
813X12.5 82.5X2.6 864X5 88.9X8
813X14.2 82.5X2.9 864X5.6 88.9X8.8
813X16 82.5X20 864X6.3 914X10
813X17.5 82.5X22.2 864X7.1 914X11
813X20 82.5X3.2 864X8 914X12.5
813X22.2 82.5X3.6 864X8.8 914X14.2
813X25 82.5X4 88.9X1.6 914X16
813X28 82.5X4.5 88.9X1.8 914X17.5
813X30 82.5X5 88.9X10 914X20
813X32 82.5X5.6 88.9X11 914X22.2
813X36 82.5X6.3 88.9X12.5 914X25
813X4.5 82.5X7.1 88.9X14.2 914X28
813X40 82.5X8 88.9X16 914X30
813X5 82.5X8.8 88.9X17.5 914X32
813X5.6 864X10 88.9X2 914X36
813X6.3 864X11 88.9X2.3 914X4.5
813X7.1 864X12.5 88.9X2.6 914X40
813X8 864X14.2 88.9X2.9 914X5
813X8.8 864X16 88.9X20 914X5.6
82.5X1.6 864X17.5 88.9X22.2 914X6.3
82.5X1.8 864X20 88.9X25 914X7.1
82.5X10 864X22.2 88.9X3.2 914X8
82.5X11 864X25 88.9X3.6 914X8.8
82.5X12.5 864X28 88.9X4
82.5X14.2 864X30 88.9X4.5
82.5X16 864X32 88.9X5

HSS(CHS)

Formcode 3
Description American Round Hollow Strcutural Sections
Metric naming convention

Profile library Checked sections Section data 127

Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HSS(CHS).PBD
Code

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Profile library Checked sections Section data 128

Checked variables

SCIA Source
symbol symbol
D OD
s (OD-ID)/2

Checked sections

101.6X3.2 152.4X6.4 190.5X4.8

101.6X4.8 152.4X7.1 190.5X6.4
101.6X5.6 152.4X7.9 190.5X7.9
101.6X5.7 152.4X9.5 190.5X9.5
101.6X6 155.6X12.7 193.7X3.2
101.6X6.4 155.6X4.8 219.1X12.7
101.6X8 155.6X6.4 219.1X4.8
101.6X8.6 155.6X7.9 219.1X6.4
114.3X3.2 155.6X9.5 219.1X8.2
114.3X4.8 168.3X11 219.1X9.5
114.3X6 168.3X12.7 222.3X12.7
114.3X8.6 168.3X3.2 222.3X4.8
127X12.7 168.3X4.8 222.3X6.4
127X3.2 168.3X6.4 222.3X7.9
127X4.8 168.3X7.1 222.3X9.5
127X6.4 168.3X7.9 244.5X12.7
127X6.6 168.3X9.5 244.5X4.8
127X7.9 174.6X12.7 244.5X6.4
127X9.5 174.6X4.8 244.5X7.9
139.7X12.7 174.6X6.4 244.5X9.5
139.7X6.6 174.6X7.9 254X12.7
139.7X9.5 174.6X9.5 254X15.9
141.3X3.4 177.8X12.7 254X4.8
141.3X4.8 177.8X3.2 254X6.4
141.3X6.6 177.8X4.8 254X7.9
141.3X9.5 177.8X6.4 254X9.5
152.4X12.7 177.8X7.9 273.1X12.7
152.4X3.2 177.8X9.5 273.1X6.4
152.4X4.8 190.5X12.7 285.8X12.7

Profile library Checked sections Section data 129

285.8X15.9 406.4X12.7 73X4.8
285.8X4.8 406.4X7.9 73X5.2
285.8X6.4 406.4X9.5 73X6.4
285.8X7.9 42.2X3.6 76.2X3
285.8X9.5 457.2X12.7 76.2X3.4
317.5X12.7 457.2X9.5 76.2X3.9
317.5X15.9 48.3X3.7 76.2X4.8
317.5X4.8 508X12.7 76.2X5.2
317.5X6.4 508X9.5 76.2X5.5
317.5X7.9 60.3X3.2 76.2X6.4
317.5X9.5 60.3X3.9 76.2X7.6
323.9X12.7 60.3X4.8 88.9X3.2
323.9X6.4 60.3X5.5 88.9X4.8
323.9X9.5 60.3X6.4 88.9X5.2
355.6X12.7 63.5X3.2 88.9X5.5
355.6X7.9 63.5X4.8 88.9X6.4
355.6X9.5 63.5X6.4 88.9X7.6
406.4X11.1 73X3.2 88.9X8

HSS(ICHS)

Formcode 3
Description American Round Hollow Strcutural Sections
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file HSS(CHS).PBD
Code

Profile library Checked sections Section data 130

 z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
D OD
s (OD-ID)/2

Checked sections

Profile library Checked sections Section data 131

1.660X0.140 2.375X0.218 4.500X0.337
1.900X0.145 2.375X0.250 5.000X0.125
10.000X0.188 2.500X0.125 5.000X0.188
10.000X0.250 2.500X0.188 5.000X0.250
10.000X0.312 2.500X0.250 5.000X0.258
10.000X0.375 2.875X0.125 5.000X0.312
10.000X0.500 2.875X0.188 5.000X0.375
10.000X0.625 2.875X0.203 5.000X0.500
10.750X0.250 2.875X0.250 5.500X0.258
10.750X0.500 20.000X0.375 5.500X0.375
11.250X0.188 20.000X0.500 5.500X0.500
11.250X0.250 3.000X0.120 5.563X0.134
11.250X0.312 3.000X0.134 5.563X0.188
11.250X0.375 3.000X0.152 5.563X0.258
11.250X0.500 3.000X0.188 5.563X0.375
11.250X0.625 3.000X0.203 6.000X0.125
12.500X0.188 3.000X0.216 6.000X0.188
12.500X0.250 3.000X0.250 6.000X0.250
12.500X0.312 3.000X0.300 6.000X0.280
12.500X0.375 3.500X0.125 6.000X0.312
12.500X0.500 3.500X0.188 6.000X0.375
12.500X0.625 3.500X0.203 6.000X0.500
12.750X0.250 3.500X0.216 6.125X0.188
12.750X0.375 3.500X0.250 6.125X0.250
12.750X0.500 3.500X0.300 6.125X0.312
14.000X0.312 3.500X0.313 6.125X0.375
14.000X0.375 4.000X0.125 6.125X0.500
14.000X0.500 4.000X0.188 6.625X0.125
16.000X0.312 4.000X0.220 6.625X0.188
16.000X0.375 4.000X0.226 6.625X0.250
16.000X0.438 4.000X0.237 6.625X0.280
16.000X0.500 4.000X0.250 6.625X0.312
18.000X0.375 4.000X0.313 6.625X0.375
18.000X0.500 4.000X0.337 6.625X0.432
2.375X0.125 4.500X0.125 6.625X0.500
2.375X0.154 4.500X0.188 6.875X0.188
2.375X0.188 4.500X0.237 6.875X0.250

Profile library Checked sections Section data 132

6.875X0.312
6.875X0.375
6.875X0.500
7.000X0.125
7.000X0.188
7.000X0.250
7.000X0.312
7.000X0.375
7.000X0.500
7.500X0.188
7.500X0.250
7.500X0.312
7.500X0.375
7.500X0.500
7.625X0.125
8.625X0.188
8.625X0.250
8.625X0.322
8.625X0.375
8.625X0.500
8.750X0.188
8.750X0.250
8.750X0.312
8.750X0.375
8.750X0.500
9.625X0.188
9.625X0.250
9.625X0.312
9.625X0.375
9.625X0.500

Profile library Checked sections Section data 133

PIPE

Formcode 3
Description American Steel Pipe
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file PIPE.PBD
Code ASTM A53/A53M
z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J

Profile library Checked sections Section data 134

19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
D OD
s (OD-ID)/2

Checked sections

102STD 203STD 51STD

102XS 203XS 51XS
102XXS 203XXS 51XXS
127STD 254STD 64STD
127XS 254XS 64XS
127XXS 25STD 64XXS
13STD 25XS 75STD
13XS 310STD 75XS
152STD 310XS 75XXS
152XS 32STD 89STD
152XXS 32XS 89XS
19STD 38STD
19XS 38XS

PIPE(Imp)

Formcode 3
Description American Steel Pipe
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001

Profile library Checked sections Section data 135

 AISC
Revision date 12/09/02
By CVL
PBD file PIPE(Imp).PBD
Code ASTM A53/A53M
z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source

Profile library Checked sections Section data 136

symbol symbol
D OD
s (OD-ID)/2

Checked sections

1-1/2STD 2-1/2XS 4XS

1-1/2XS 2-1/2XXS 4XXS
1-1/4STD 2STD 5STD
1-1/4XS 2XS 5XS
1/2STD 2XXS 5XXS
1/2XS 3-1/2STD 6STD
10STD 3-1/2XS 6XS
10XS 3/4STD 6XXS
12STD 3/4XS 8STD
12XS 3STD 8XS
1STD 3XS 8XXS
1XS 3XXS
2-1/2STD 4STD

Profile library Checked sections Section data 137

ANGLE SECTIONS

RSUA

Formcode 4
Description Unequal angles
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.38
Revision date 07/10/99
By CADS
PBD file RSUA.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area of section
2 iy Radius of gyration / Axis x-x
3 iz Radius of gyration / Axis y-y
4 cz cx : Distance of centre of gravity
5 cy cy : Distance of centre of gravity
8 Iy Second Moment of Area / Axis x-x
9 Iz Second Moment of Area / Axis y-y
10 Wy Elastic modulus / Axis x-x
11 Wz Elastic modulus / Axis y-y
15 I1 Second Moment of Area / Axis u-u

Profile library Checked sections Section data 138

16 I2 Second Moment of Area / Axis v-v
32 G Mass
37 i1b Radius of gyration / Axis u-u
38 i2b Radius of gyration / Axis v-v

Checked variables

SCIA Source
symbol symbol
B B
H A
S t
T t
R r2
R1 r1

Checked sections

100/65/10 200/100/15
100/65/7 200/150/12
100/65/8 200/150/15
100/75/10 200/150/18
100/75/12 40/25/4
100/75/8 60/30/5
125/75/10 60/30/6
125/75/12 65/50/5
125/75/6.5 65/50/6
125/75/8 65/50/8
137/102/6.4 75/50/6
137/102/7.9 75/50/8
137/102/9.5 80/60/6
150/75/10 80/60/7
150/75/12 80/60/8
150/75/15
150/90/10
150/90/12
150/90/15
200/100/10
200/100/12

Profile library Checked sections Section data 139

RSEA

Formcode 4
Description Equal angles
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.36-B.37
Revision date 07/10/99
By CADS
PBD file RSEA.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2

ZLCS

z y

YLCS
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration / Axis x-x
3 iz Radius of gyration / Axis y-y
4 cz cx : Distance of centre of gravity
5 cy cy : Distance of centre of gravity
8 Iy Second Moment of Area / Axis x-x
9 Iz Second Moment of Area / Axis y-y
10 Wy Elastic modulus / Axis x-x
11 Wz Elastic modulus / Axis y-y
15 I1 Second Moment of Area / Axis u-u
16 I2 Second Moment of Area / Axis v-v
32 G Mass
37 i1b Radius of gyration / Axis u-u

Profile library Checked sections Section data 140

38 i2b Radius of gyration / Axis v-v

Checked variables

SCIA Source
symbol symbol
B A
H A
S t
T t
R r2
R1 r1

Checked sections

Profile library Checked sections Section data 141

100/100/10 25/25/5 50/50/5
100/100/12 250/250/25 50/50/6
100/100/15 250/250/28 50/50/8
100/100/8 250/250/32 60/60/10
120/120/10 250/250/35 60/60/5
120/120/12 30/30/3 60/60/6
120/120/15 30/30/4 60/60/8
120/120/8 30/30/5 70/70/10
150/150/10 40/40/3 70/70/6
150/150/12 40/40/4 70/70/8
150/150/15 40/40/5 80/80/10
150/150/18 40/40/6 80/80/6
200/200/16 45/45/3 80/80/8
200/200/18 45/45/4 90/90/10
200/200/20 45/45/5 90/90/12
200/200/24 45/45/6 90/90/6
25/25/3 50/50/3 90/90/7
25/25/4 50/50/4 90/90/8

HFLeq

Formcode 4
Description Equal angles
Source Staalprofielen
Overspannend staal
pp.56-57
Revision date 28/03/01
By GW
PBD file HFLeq.PBD
Code EU 56-77
DIN 1028

Profile library Checked sections Section data 142

 ZLCS

z y

YLCS
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz zs
5 cy ys
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
15 I1 Iu
16 I2 Iv
37 i1b iu
38 i2b iv

Checked variables

SCIA Source
symbol symbol
B b
H h
S t
T t
R r1
R1 r

Profile library Checked sections Section data 143

Checked sections

100x100x10 80x80x10
100x100x12 80x80x8
100x100x8 90x90x7
110x110x10 90x90x9
120x120x10
120x120x12
120x120x15
130x130x12
140x140x10
140x140x13
150x150x10
150x150x12
150x150x15
150x150x18
160x160x15
180x180x16
180x180x18
200x200x16
200x200x18
200x200x20
200x200x24
40x40x4
40x40x5
45x45x4
45x45x5
50x50x5
50x50x6
50x50x8
60x60x5
60x60x6
60x60x8
70x70x7
75x75x7
75x75x8

Profile library Checked sections Section data 144

HFLue

Formcode 4
Description Unequal angles
Source Staalprofielen
Overspannend staal
pp.58-59
Revision date 28/03/01
By EP
PBD file HFLue.PBD
Code EU 57-78
DIN 1029
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz zs
5 cy ys
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
15 I1 Iu

Profile library Checked sections Section data 145

16 I2 Iv
37 i1b iu
38 i2b iv

Checked variables

SCIA Source
symbol symbol
B b
H h
S t
T t
R r1
R1 r

Checked sections

Profile library Checked sections Section data 146

100x50x6 150x75x9 60x40x5
100x50x8 160x80x12 60x40x6
100x65x9 160x80x10 75x50x7
120x80x10 180x90x10 80x40x6
120x80x8 200x100x10 80x40x8
130x65x10 200x100x12 80x60x7
130x65x8 200x100x14 80x65x8
150x100x10 50x30x4 90x60x8
150x100x12 50x30x5
150x75x11 60x30x5

Formcode 4
Description Winkelstahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.48-55
Revision date 29/03/01
By CVL
PBD file L.PBD
Code DIN 1028 - DIN 1029
ZLCS

z
y
YLCS

Checked properties

Profile library Checked sections Section data 147

Property SCIA Source
number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz ey
5 cy ez
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
15 I1 I
16 I2 I

Checked variables

SCIA Source
symbol symbol
B b
H a
S s
T s
R r2
R1 r1

Checked sections

100X10 100X75X9 130X65X10

100X12 100X8 130X65X12
100X50X10 110X10 130X65X8
100X50X6 120X10 130X90X10
100X50X8 120X11 130X90X12
100X65X11 120X12 140X13
100X65X7 120X80X10 150X100X10
100X65X9 120X80X12 150X100X12
100X75X11 120X80X8 150X100X14
100X75X7 130X12 150X12

Profile library Checked sections Section data 148

150X14 30X20X3 60X8
150X15 30X20X4 65X50X5
150X75X11 30X3 65X50X7
150X75X9 30X4 65X50X9
160X15 30X5 65X7
160X17 35X4 70X50X6
160X80X12 35X5 70X6
180X16 40X20X3 70X7
180X18 40X20X4 70X9
180X90X10 40X25X4 75X50X7
180X90X12 40X4 75X50X9
200X100X10 40X5 75X55X5
200X100X12 45X30X3 75X55X7
200X100X14 45X30X4 75X55X9
200X16 45X30X5 75X7
200X18 45X4 75X8
200X20 45X5 80X10
200X22 50X30X4 80X40X6
200X24 50X30X5 80X40X8
200X26 50X40X4 80X6
200X28 50X40X5 80X60X7
200X30 50X5 80X65X10
20X3 50X6 80X65X8
250X18 50X7 80X8
250X20 55X6 90X60X6
250X22 60X30X5 90X60X8
250X24 60X40X5 90X7
250X26 60X40X6 90X9
250X28 60X40X7
25X3 60X5
25X4 60X6

LS

Formcode 4

Profile library Checked sections Section data 149

Description Scharfkantiger L-Stahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.63
Revision date 16/01/01
By CVL
PBD file LS.PBD
Code DIN 1022

ZLCS

z y

YLCS
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A

Checked variables

SCIA Source
symbol symbol
D a
T ts

Checked sections

20X3
20X4
25X3
25X4

Profile library Checked sections Section data 150

30X3
30X4
35X4
40X4
40X5
45X5
50X5

L(AISC)

Formcode 4
Description American Single Angles
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file L(AISC).PBD
Code ASTM A6/A6M
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx

Profile library Checked sections Section data 151

3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H d
S t
T t
R kdes-t
R1 2*(kdes-t)

Checked sections

102X102X11.1 102X76X9.5 127X127X9.5

102X102X12.7 102X89X12.7 127X76X11.1
102X102X15.9 102X89X6.4 127X76X12.7
102X102X19 102X89X7.9 127X76X6.4
102X102X6.4 102X89X9.5 127X76X7.9
102X102X7.9 127X127X11.1 127X76X9.5
102X102X9.5 127X127X12.7 127X89X12.7
102X76X12.7 127X127X15.9 127X89X15.9
102X76X15.9 127X127X19 127X89X19
102X76X6.4 127X127X22.2 127X89X6.4
102X76X7.9 127X127X7.9 127X89X7.9

Profile library Checked sections Section data 152

127X89X9.5 203X102X22.2 76X51X4.8
152X102X11.1 203X102X25.4 76X51X6.4
152X102X12.7 203X152X11.1 76X51X7.9
152X102X14.3 203X152X12.7 76X51X9.5
152X102X15.9 203X152X14.3 76X64X11.1
152X102X19 203X152X15.9 76X64X12.7
152X102X22.2 203X152X19 76X64X4.8
152X102X7.9 203X152X22.2 76X64X6.4
152X102X9.5 203X152X25.4 76X64X7.9
152X152X11.1 203X203X12.7 76X64X9.5
152X152X12.7 203X203X14.3 76X76X11.1
152X152X14.3 203X203X15.9 76X76X12.7
152X152X15.9 203X203X19 76X76X4.8
152X152X19 203X203X22.2 76X76X6.4
152X152X22.2 203X203X25.4 76X76X7.9
152X152X25.4 203X203X28.6 76X76X9.5
152X152X7.9 51X51X3.2 89X64X12.7
152X152X9.5 51X51X4.8 89X64X6.4
152X89X12.7 51X51X6.4 89X64X7.9
152X89X7.9 51X51X7.9 89X64X9.5
152X89X9.5 51X51X9.5 89X76X11.1
178X102X11.1 64X51X4.8 89X76X12.7
178X102X12.7 64X51X6.4 89X76X6.4
178X102X15.9 64X51X7.9 89X76X7.9
178X102X19 64X51X9.5 89X76X9.5
178X102X9.5 64X64X12.7 89X89X11.1
203X102X11.1 64X64X4.8 89X89X12.7
203X102X12.7 64X64X6.4 89X89X6.4
203X102X14.3 64X64X7.9 89X89X7.9
203X102X15.9 64X64X9.5 89X89X9.5
203X102X19 76X51X12.7

L(Imp)

Formcode 4

Profile library Checked sections Section data 153

Description American Single Angles
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file L(Imp).PBD
Code ASTM A6/A6M
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm

Profile library Checked sections Section data 154

31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H d
S t
T t
R kdes-t
R1 2*(kdes-t)

Checked sections

2-1/2X2-1/2X1/2 3-1/2X3X1/2 4X3-1/2X1/4

2-1/2X2-1/2X1/4 3-1/2X3X1/4 4X3-1/2X3/8
2-1/2X2-1/2X3/16 3-1/2X3X3/8 4X3-1/2X5/16
2-1/2X2-1/2X3/8 3-1/2X3X5/16 4X3X1/2
2-1/2X2-1/2X5/16 3-1/2X3X7/16 4X3X1/4
2-1/2X2X1/4 3X2-1/2X1/2 4X3X3/8
2-1/2X2X3/16 3X2-1/2X1/4 4X3X5/16
2-1/2X2X3/8 3X2-1/2X3/16 4X3X5/8
2-1/2X2X5/16 3X2-1/2X3/8 4X4X1/2
2X2X1/4 3X2-1/2X5/16 4X4X1/4
2X2X1/8 3X2-1/2X7/16 4X4X3/4
2X2X3/16 3X2X1/2 4X4X3/8
2X2X3/8 3X2X1/4 4X4X5/16
2X2X5/16 3X2X3/16 4X4X5/8
3-1/2X2-1/2X1/2 3X2X3/8 4X4X7/16
3-1/2X2-1/2X1/4 3X2X5/16 5X3-1/2X1/2
3-1/2X2-1/2X3/8 3X3X1/2 5X3-1/2X1/4
3-1/2X2-1/2X5/16 3X3X1/4 5X3-1/2X3/4
3-1/2X3-1/2X1/2 3X3X3/16 5X3-1/2X3/8
3-1/2X3-1/2X1/4 3X3X3/8 5X3-1/2X5/16
3-1/2X3-1/2X3/8 3X3X5/16 5X3-1/2X5/8
3-1/2X3-1/2X5/16 3X3X7/16 5X3X1/2
3-1/2X3-1/2X7/16 4X3-1/2X1/2 5X3X1/4

Profile library Checked sections Section data 155

5X3X3/8 6X4X7/8 8X4X5/8
5X3X5/16 6X4X9/16 8X4X7/16
5X3X7/16 6X6X1 8X4X7/8
5X5X1/2 6X6X1/2 8X4X9/16
5X5X3/4 6X6X3/4 8X6X1
5X5X3/8 6X6X3/8 8X6X1/2
5X5X5/16 6X6X5/16 8X6X3/4
5X5X5/8 6X6X5/8 8X6X5/8
5X5X7/16 6X6X7/16 8X6X7/16
5X5X7/8 6X6X7/8 8X6X7/8
6X3-1/2X1/2 6X6X9/16 8X6X9/16
6X3-1/2X3/8 7X4X1/2 8X8X1
6X3-1/2X5/16 7X4X3/4 8X8X1-1/8
6X4X1/2 7X4X3/8 8X8X1/2
6X4X3/4 7X4X5/8 8X8X3/4
6X4X3/8 7X4X7/16 8X8X5/8
6X4X5/16 8X4X1 8X8X7/8
6X4X5/8 8X4X1/2 8X8X9/16
6X4X7/16 8X4X3/4

L(CSN)

Formcode 4
Description Czech Single Angles
Source
Revision date
By
PBD file L(CSN).PBD
Code Czech Standard CSN 42 5541 / 42 5545;

Profile library Checked sections Section data 156

 ZLCS

z
y
YLCS

Checked properties

Checked variables

Checked sections

100/10 125/14 160/14

100/12 125/8 160/16
100/6 125/80/10 180/12
100/63/10 125/80/12 180/14
100/63/8 125/80/8 20/3
100/65/10 130/12 200/14
100/65/12 130/14 200/16
100/65/7 130/90/10 200/20
100/65/8 130/90/12 22/3
100/8 130/90/14 25/16/3
110/10 140/10 25/3
110/70/10 140/12 25/4
110/70/12 140/14 28/3
110/70/8 140/90/10 30/20/3
110/8 140/90/12 30/20/4
120/10 140/90/14 30/3
120/12 140/90/8 30/4
120/8 160/10 32/20/3
120/80/10 160/100/10 32/3
120/80/12 160/100/12 32/4
120/80/8 160/100/14 35/3
125/10 160/100/16 35/4
125/12 160/12 36/3

Profile library Checked sections Section data 157

36/4 56/4 70/7
40/25/3 56/5 70/8
40/25/4 56/6 75/50/5
40/25/5 60/40/5 75/50/6
40/3 60/40/6 75/50/7
40/4 60/40/7 75/50/8
40/5 60/6 80/10
45/28/4 60/8 80/50/5
45/3 63/4 80/50/6
45/30/4 63/40/4 80/50/8
45/30/5 63/40/5 80/6
45/4 63/40/6 80/60/6
45/5 63/5 80/60/7
50/30/4 63/6 80/60/8
50/30/5 65/50/5 80/8
50/32/3 65/50/6 90/10
50/32/4 65/50/7 90/56/6
50/4 65/50/8 90/56/8
50/5 65/6 90/6
50/6 65/8 90/60/6
55/5 70/45/5 90/60/8
55/6 70/45/6 90/8
56/36/4 70/5
56/36/5 70/6

Profile library Checked sections Section data 158

CHANNEL SECTION

PFC

Formcode 5
Description Parallel Flange Channel section
Source Parallel Flange Channels
Section Properties and Member Capacities to BS 5950
part 1:1990
pp.16-19
Revision date 07/10/99
By CADS
PBD file PFC.PBD
Code BS 5950 part 1:1990
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration /axis x-x
3 iz Radius of gyration /axis y-y
4 cz
5 cy Cy
8 Iy Second Moment of Area/axis x-x
9 Iz Second Moment of Area/axis y-y
10 Wy Elastic modulus / axis x-x

Profile library Checked sections Section data 159

11 Wz Elastic modulus / axis y-y
14 It J : Torsional constant
20 V0 Surface area
32 G Mass

Checked variables

SCIA Source
symbol symbol
H D
B B
A t
E T
R r

Checked sections

100/50/10
125/65/15
150/75/18
150/90/24
180/75/20
180/90/26
200/75/23
200/90/30
230/75/26
230/90/32
260/75/28
260/90/35
300/100/46
300/90/41
380/100/54
430/100/64

Profile library Checked sections Section data 160

RSC

Formcode 5
Description Channel section
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.30-B.33
Revision date 07/10/99
By CADS
PBD file RSC.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy Radius of gyration /axis x-x
3 iz Radius of gyration /axis y-y
4 cz
5 cy Cy
8 Iy Second Moment of Area/axis x-x
9 Iz Second Moment of Area/axis y-y
10 Wy Elastic modulus / axis x-x
11 Wz Elastic modulus / axis y-y
14 It J : Torsional constant
20 V0 Surface area
26 CM H : Warping constant
32 G Mass

Profile library Checked sections Section data 161

Checked variables

SCIA Source
symbol symbol
H D
B B
S t
T T
R r1
R1 r2

Checked sections

102/51/10.42
127/64/14.90
152/76/17.88
152/89/23.84
178/76/20.84
178/89/26.81
203/76/23.82
203/89/29.78
229/76/26.06
229/89/32.76
254/76/28.29
254/89/35.74
305/102/46.18
305/89/41.69
381/102/55.10
432/102/65.54
76/38/6.70

Profile library Checked sections Section data 162

U

Formcode 5
Description Rundkantiger U-Stahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.46-47
Revision date 07/03/00
By CVL
PBD file U.PBD
Code DIN 1026
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
5 cy ez
6 Sy Sy
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT

Checked variables

Profile library Checked sections Section data 163

SCIA Source
symbol symbol
B b
H h
S ts
T tg
R r1
R1 r2

Checked sections

100 220 30X15 40X20

120 240 320 50
140 260 350 50X25
160 280 380 60
180 30 40 65
200 300 400 80

Profile library Checked sections Section data 164

UPN

Formcode 5
Description European standard channels
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.38-39
Revision date 07/03/00
By CVL
PBD file UPN.PBD
Code DIN 1026
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
5 cy ys
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Profile library Checked sections Section data 165

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r1
R1 r2

Checked sections

100
120
140
160
180
200
220
240
260
280
300
320
350
380
400
80

Profile library Checked sections Section data 166

UAP

Formcode 5
Description Channels with parallel flanges
Source Profil ARBED
Sales programme Structural Shapes
Edition Octobre 1995
pp.36-37
Revision date 07/03/00
By CVL
PBD file UAP.PBD
Code NF A 45-255
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
5 cy ys
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Profile library Checked sections Section data 167

Checked variables

SCIA Source
symbol symbol
B b
H h
A tw
E tf
R r

Checked sections

100
130
150
175
200
220
250
300
80

Profile library Checked sections Section data 168

UPE

Formcode 5
Description U Profil mif parallel verlaufenden Flanschkanten
Source Bauen mit Stahl
Thema UPE, UNP, UAP
Tabelle 1
Salzgitter AG
Revision date 07/03/00
By CVL
PBD file UPE.PBD
Code DIN 1026-2
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
5 cy ey
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz
14 It IT
31 Mplz Wpl,z x 240 N/mm
30 Mply Wpl,y x 240 N/mm

Checked variables

Profile library Checked sections Section data 169

SCIA Source
symbol symbol
B b
H h
T1 tw
T2 tf
R r

Checked sections

100
120
140
160
180
200
220
240
270
300
330
360
400
80

Profile library Checked sections Section data 170

UPE(CSN)

Formcode 5
Description Channels with parallel flanges
Source CD-ROM Database Ferona
Version 3.0
1999
Revision date 06/08/01
By CVL
PBD file UPE(CSN).PBD
Code ESN 42 5572
z

Checked properties

Property SCIA Source

number symbol symbol
2 iy iv
3 iz ix
8 Iy Jv
9 Iz Jx
10 Wy Wv
11 Wz Jx
14 It IT

Checked variables

SCIA Source
symbol symbol
B b
H h

Profile library Checked sections Section data 171

T1 t1
T2 t2
R R

Checked sections

100
120
140
160
180
200
220
240
270
300
400
50
65
80

Formcode 5
Description American Standard Channels
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file C.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 172

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 173

R kdes-tf
R1

Checked sections

100X10.8 200X17.1 310X37

100X6.7 200X20.5 310X45
100X8 200X27.9 380X50.4
130X10.4 230X19.9 380X60
130X13 230X22 380X74
150X12.2 230X30 75X5.2
150X15.6 250X22.8 75X6.1
150X19.3 250X30 75X7.4
180X14.6 250X37 75X8.9
180X18.2 250X45
180X22 310X30.8

C(Imp)

Formcode 5
Description American Standard Channels
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file C(Imp).PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 174

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 175

R kdes-tf
R1

Checked sections

10X15.3 3X4.1 7X12.25

10X20 3X5 7X14.75
10X25 3X6 7X9.8
10X30 4X4.5 8X11.5
12X20.7 4X5.4 8X13.75
12X25 4X7.25 8X18.75
12X30 5X6.7 9X13.4
15X33.9 5X9 9X15
15X40 6X10.5 9X20
15X50 6X13
3X3.5 6X8.2

MC

Formcode 5
Description American Miscellaneous Channels
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file MC.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 176

 z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 177

R kdes-tf
R1

Checked sections

150X17.9 460X68.2
150X22.5 460X77.2
150X22.8 460X86
150X24.3
150X26.8
180X28.4
180X33.8
200X12.6
200X27.8
200X29.8
200X31.8
200X33.9
230X35.6
230X37.8
250X12.5
250X33
250X37
250X42.4
250X50
250X61.2
310X15.8
310X46
310X52
310X60
310X67
310X74
330X47.3
330X52
330X60
330X74
460X63.5

Profile library Checked sections Section data 178

MC(Imp)

Formcode 5
Description American Miscellaneous Channels
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file MC(Imp).PBD
Code ASTM A6/A6M
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)

Profile library Checked sections Section data 179

22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

10X22 13X31.8 6X18

10X25 13X35 7X19.1
10X28.5 13X40 7X22.7
10X33.6 13X50 8X18.7
10X41.1 18X42.7 8X20
10X8.4 18X45.8 8X21.4
12X10.6 18X51.9 8X22.8
12X31 18X58 8X8.5
12X35 6X12 9X23.9
12X40 6X15.1 9X25.4
12X45 6X15.3
12X50 6X16.3

Profile library Checked sections Section data 180

TEE SECTION

UCT

Formcode 6
Description Structural Tee cut from universal columns
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.54-B.55
Revision date 07/10/99
By CADS
PBD file UCT.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2

Z
y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area
2 iy Radius of gyration /axis x-x
3 iz Radius of gyration /axis y-y
4 cz Cx
8 Iy Second Moment of Area/axis x-x
9 Iz Second Moment of Area/axis y-y
10 Wy Elastic modulus / axis x-x
11 Wz Elastic modulus / axis y-y

Profile library Checked sections Section data 181

14 It J : Torsional constant
32 G Mass

Checked variables

SCIA Source
symbol symbol
B B
H d
T T
S t
R r

Checked sections

152/76/12
152/76/15
152/76/19
203/102/23
203/102/26
203/102/30
203/102/36
203/102/43
254/127/37
254/127/45
254/127/54
254/127/66
305/152/49
305/152/59
305/152/69
305/152/79
368/178/101
368/178/65
368/178/77
368/178/89
406/178/118

Profile library Checked sections Section data 182

UBT

Formcode 6
Description Structural Tee cut from universal beams
Source BS 5950 part 1 : 1990 & EN 10210-2
Section Tables
pp.B.50-B.53
Revision date 07/10/99
By CADS
PBD file UBT.PBD
Code BS 5950 part 1 : 1990 & EN 10210-2
z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area
2 iy Radius of gyration /axis x-x
3 iz Radius of gyration /axis y-y
4 cz Cx
8 Iy Second Moment of Area/axis x-x
9 Iz Second Moment of Area/axis y-y
10 Wy Elastic modulus / axis x-x
11 Wz Elastic modulus / axis y-y
32 G Mass

Profile library Checked sections Section data 183

Checked variables

SCIA Source
symbol symbol
B B
H d
T T
S t
R r

Checked sections

Profile library Checked sections Section data 184

102/127/11 191/229/45
102/127/13 191/229/49
102/127/14 210/267/41
102/152/13 210/267/46
102/152/14 210/267/51
102/152/17 210/267/55
127/152/19 210/267/61
127/152/21 229/305/51
127/152/24 229/305/57
127/178/17 229/305/63
127/178/20 229/305/70
133/102/13 254/343/63
133/102/15 254/343/70
140/203/20 254/343/76
140/203/23 254/343/85
146/127/16 267/381/67
146/127/19 267/381/74
146/127/22 267/381/87
152/229/26 267/381/99
152/229/30 292/419/113
152/229/34 292/419/88
152/229/37 292/419/97
152/229/41 305/305/119
165/152/20 305/305/75
165/152/23 305/305/90
165/152/27 305/457/101
171/178/23 305/457/112
171/178/26 305/457/127
171/178/29
171/178/34
178/203/27
178/203/30
178/203/34
178/203/37
191/229/34
191/229/37
191/229/41

Profile library Checked sections Section data 185

T

Formcode 6
Description Rundkantiger T-Stahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.62-63
Revision date 16/01/01
By CVL
PBD file T.PBD
Code DIN1024
z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz ey
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz

Checked variables

Profile library Checked sections Section data 186

SCIA Source
symbol symbol
B b
H h
T ts
S ts
R r1
R1 r2
R2 r3

Checked sections

100
120
140
20
25
30
35
40
45
50
60
70
80
90

TB

Formcode 6
Description Rundkantiger T-Stahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.63
Revision date 16/01/01

Profile library Checked sections Section data 187

By CVL
PBD file TB.PBD
Code DIN 1024

Z
y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz ey
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz

Checked variables

SCIA Source
symbol symbol
B b
H h
T ts
S ts
R r1
R1 r2
R2 r3

Profile library Checked sections Section data 188

Checked sections

30
35
40
50
60

TPS

Formcode 6
Description Scharfkantiger T-Stahl
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.63
Revision date 16/01/01
By CVL
PBD file TPS.PBD
Code DIN 59051

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A

Profile library Checked sections Section data 189

Checked variables

SCIA Source
symbol symbol
B b
H h
T tg
S ts

Checked sections

20
25
30
35
40

IPET

Formcode 6
Description Structural Tee from IPE section
Source Staalprofielen
Overspannend staal
pp.52-53
Revision date 04/04/01
By GV
PBD file IPET.PBD
Code
z

y
Z

Profile library Checked sections Section data 190

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz zs
8 Iy Iy
9 Iz Iz
10 Wy Wy,el
11 Wz Wz,el
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 191

100 220 400
120 240 450
140 270 500
160 300 550
180 330 600
200 360 80

HEAT

Formcode 6
Description Structural Tee from HEA section
Source Staalprofielen
Overspannend staal
pp.52-53
Revision date 04/04/01
By GV
PBD file HEAT.PBD
Code

Z
y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz
4 cz zs

Profile library Checked sections Section data 192

8 Iy Iy
9 Iz Iz
10 Wy Wy,el
11 Wz Wz,el
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 193

100 240 450
1000 260 500
120 280 550
140 300 600
160 320 650
180 340 700
200 360 800
220 400 900

HEBT

Formcode 6
Description Structural Tee from HEB section
Source Staalprofielen
Overspannend staal
pp.54-55
Revision date 04/04/01
By KC
PBD file HEBT.PBD
Code

Z
y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz

Profile library Checked sections Section data 194

4 cz zs
8 Iy Iy
9 Iz Iz
10 Wy Wy,el
11 Wz Wz,el
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

Profile library Checked sections Section data 195

100 240 450
1000 260 500
120 280 550
140 300 600
160 320 650
180 340 700
200 360 800
220 400 900

HEMT

Formcode 6
Description Structural Tee from HEM section
Source Staalprofielen
Overspannend staal
pp.54-55
Revision date 04/04/01
By KC
PBD file HEMT.PBD
Code

Z
y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy iy
3 iz iz

Profile library Checked sections Section data 196

4 cz zs
8 Iy Iy
9 Iz Iz
10 Wy Wy,el
11 Wz Wz,el
30 Mply Wpl,y x 240 N/mm
31 Mplz Wpl,z x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b
H h
S tw
T tf
R r

Checked sections

100 240 450

1000 260 500
120 280 550
140 300 600
160 320 650
180 340 700
200 360 800
220 400 900

WT

Formcode 6
Description American WT shapes
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units

Profile library Checked sections Section data 197

 Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file WT.PBD
Code ASTM A6/A6M

Z y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

Profile library Checked sections Section data 198

SCIA Source
symbol symbol
B bf
H d
S tw
T tf
R kdes-tf

Checked sections

100X11.25 125X74.5 155X64.5

100X13.3 125X8.95 155X71.5
100X15.65 125X83.5 155X79
100X17.95 155X10.5 155X89.5
100X20.85 155X101 180X108
100X23.05 155X11.9 180X118.5
100X26 155X113 180X131
100X29.5 155X126.5 180X143.5
100X35.5 155X14.15 180X157
100X43 155X141.5 180X16.45
100X50 155X156.5 180X173.5
100X7.5 155X16.35 180X19.5
100X9.65 155X171 180X191
125X11.15 155X187.5 180X210.5
125X12.65 155X19.35 180X22
125X14.2 155X207.5 180X231.5
125X16.35 155X22.25 180X25.5
125X19.25 155X227 180X254.5
125X22.4 155X250 180X275.5
125X24.55 155X26 180X28.9
125X29 155X30 180X296
125X33.5 155X33.5 180X317
125X36.5 155X37 180X32
125X40 155X39.5 180X338.5
125X44.5 155X43 180X36
125X50.5 155X48.5 180X372
125X57.5 155X53.5 180X39.5
125X65.5 155X58.5 180X409

Profile library Checked sections Section data 199

180X45.5 230X72 305X62.5
180X450 230X79 305X70
180X495 230X88.5 305X76.5
180X50.5 230X96.5 305X77.5
180X543 265X109.5 305X87
180X55 265X124 305X97.5
180X601 265X136 345X108.5
180X61 265X150 345X120
180X67 265X33 345X132.5
180X73.5 265X36 345X144.5
180X81 265X37 345X161.5
180X89.5 265X41 345X175
180X98 265X42.5 345X192
205X19.4 265X46 345X209.5
205X23.05 265X50.5 345X228.5
205X26.5 265X54.5 345X250
205X30 265X61.5 345X274
205X33.5 265X69 345X401
205X37.5 265X75 345X62.5
205X42.5 265X82.5 345X70
205X50 265X91 345X76
205X57 265X98 345X85
205X66 305X108.5 345X96
205X74.5 305X120.5 380X110
230X106.5 305X131 380X128.5
230X117.5 305X142.5 380X142
230X130 305X153.5 380X157
230X26 305X170.5 380X175
230X30 305X186 380X194.5
230X34 305X207.5 380X217
230X37 305X227.5 380X242
230X41 305X249 380X265.5
230X44.5 305X275.5 380X291
230X48.5 305X41 380X67
230X53 305X46 380X73.5
230X56.5 305X50.5 380X80.5
230X64 305X56.5 380X86.5

Profile library Checked sections Section data 200

380X92.5 460X182.5 500X241.5
380X98 460X190.5 500X243
420X105 460X193.5 500X247
420X113 460X208.5 500X269.5
420X125.5 460X223 500X277
420X149.5 460X244 500X292
420X164.5 460X267 500X295.5
420X179.5 460X292.5 500X321
420X196 460X326.5 500X374
420X216.5 460X392 500X441.5
420X236.5 460X483.5 50X9.65
420X249 460X594 550X171.5
420X288 500X111 550X195
420X88 500X124.5 550X216.5
420X96.5 500X136 550X249.5
460X100.5 500X148 65X11.9
460X111.5 500X157 65X14.05
460X119 500X160.5 75X11.25
460X126.5 500X175 75X12
460X135.5 500X185.5 75X14.9
460X144.5 500X196.5 75X18.55
460X156.5 500X206 75X6.5
460X171 500X207.5 75X6.75
460X172.5 500X221.5 75X9

WT(Imp)

Formcode 6
Description American WT shapes
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02

Profile library Checked sections Section data 201

By CVL
PBD file WT(Imp).PBD
Code ASTM A6/A6M

Z y
Y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf

Profile library Checked sections Section data 202

H d
S tw
T tf
R kdes-tf

Checked sections

10.5X100.5 12X51.5 15X195.5

10.5X22 12X52 15X45
10.5X24 12X58.5 15X49.5
10.5X25 12X65.5 15X54
10.5X27.5 12X73 15X58
10.5X28.5 12X81 15X62
10.5X31 12X88 15X66
10.5X34 12X96 15X74
10.5X36.5 13.5X108.5 15X86.5
10.5X41.5 13.5X117.5 15X95.5
10.5X46.5 13.5X129 16.5X100.5
10.5X50.5 13.5X140.5 16.5X110.5
10.5X55.5 13.5X153.5 16.5X120.5
10.5X61 13.5X168 16.5X131.5
10.5X66 13.5X184 16.5X145.5
10.5X73.5 13.5X269.5 16.5X159
10.5X83 13.5X42 16.5X177
10.5X91 13.5X47 16.5X193.5
12X103.5 13.5X51 16.5X59
12X114.5 13.5X57 16.5X65
12X125 13.5X64.5 16.5X70.5
12X139.5 13.5X73 16.5X76
12X153 13.5X80.5 16.5X84.5
12X167.5 13.5X89 18X105
12X185 13.5X97 18X115
12X27.5 15X105.5 18X116
12X31 15X117.5 18X122.5
12X34 15X130.5 18X128
12X38 15X146 18X130
12X42 15X163 18X140
12X47 15X178.5 18X150

Profile library Checked sections Section data 203

18X164 22X115 5X50
18X179.5 22X131 5X56
18X196.5 22X145 5X6
18X219.5 22X167.5 5X7.5
18X263.5 2X6.5 5X8.5
18X325 3X10 5X9.5
18X399 3X12.5 6X105
18X67.5 3X4.25 6X11
18X75 3X4.5 6X115
18X80 3X6 6X126
18X85 3X7.5 6X13
18X91 3X8 6X139.5
18X97 4X10.5 6X15
2.5X8 4X12 6X152.5
2.5X9.5 4X14 6X168
20X105.5 4X15.5 6X17.5
20X107.5 4X17.5 6X20
20X117.5 4X20 6X22.5
20X124.5 4X24 6X25
20X132 4X29 6X26.5
20X138.5 4X33.5 6X29
20X139 4X5 6X32.5
20X148.5 4X6.5 6X36
20X162 4X7.5 6X39.5
20X163.5 4X9 6X43.5
20X165.5 5X11 6X48
20X181 5X13 6X53
20X186 5X15 6X60
20X196 5X16.5 6X68
20X198.5 5X19.5 6X7
20X215.5 5X22.5 6X76
20X251.5 5X24.5 6X8
20X296.5 5X27 6X85
20X74.5 5X30 6X9.5
20X83.5 5X34 6X95
20X91.5 5X38.5 7X105.5
20X99.5 5X44 7X11

Profile library Checked sections Section data 204

7X116.5 7X34 8X33.5
7X128.5 7X365 8X38.5
7X13 7X37 8X44.5
7X141.5 7X404 8X50
7X15 7X41 9X17.5
7X155.5 7X45 9X20
7X17 7X49.5 9X23
7X171 7X54.5 9X25
7X185 7X60 9X27.5
7X19 7X66 9X30
7X199 7X72.5 9X32.5
7X21.5 7X79.5 9X35.5
7X213 7X88 9X38
7X227.5 7X96.5 9X43
7X24 8X13 9X48.5
7X250 8X15.5 9X53
7X26.5 8X18 9X59.5
7X275 8X20 9X65
7X30.5 8X22.5 9X71.5
7X302.5 8X25 9X79
7X332.5 8X28.5 9X87.5

MT

Formcode 6
Description American MT shapes
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file MT.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 205

 z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 206

R kdes-tf

Checked sections

100X4.6
100X4.85
125X5.6
125X5.95
125X6.7
155X7.45
155X8.05
155X8.8
50X4.45
65X14.05
75X2.75
75X3.3

MT(Imp)

Formcode 6
Description American MT shapes
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file MT(Imp).PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 207

 z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 208

R kdes-tf

Checked sections

2.5X9.45
2X3
3X1.85
3X2.2
4X3.1
4X3.25
5X3.75
5X4
5X4.5
6X5
6X5.4
6X5.9

ST

Formcode 6
Description American S shapes
Metric naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file ST.PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 209

 z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 210

R kdes-tf
R1

Checked sections

100X13.7 230X40.7 305X90

100X17 230X52 37.5X4.25
125X18.9 255X49.1 37.5X5.6
125X26 255X56 50X5.75
155X23.65 255X64 50X7.05
155X26 255X71.5 65X7.5
155X30.35 305X59.5 75X12.85
155X37 305X67 75X9.3
190X32 305X74.5
190X37 305X79

ST(Imp)

Formcode 6
Description American S shapes
Imperial naming convention
Source CD - Shapes Database
U.S. Customary & Metric Units
Version 3.0 , 2001
AISC
Revision date 12/09/02
By CVL
PBD file ST(Imp).PBD
Code ASTM A6/A6M

Profile library Checked sections Section data 211

 z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy rx
3 iz ry
4 cz y
5 cy x
8 Iy Ix
9 Iz Iy
10 Wy Sx
11 Wz Sy
14 It J
19 a ATAN(tan_alpha)
22 Dy e0
26 CM Cw
30 Mply Zx x 240 N/mm
31 Mplz Zy x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B bf
H d
S tw
T tf

Profile library Checked sections Section data 212

R kdes-tf
R1

Checked sections

1.5X2.85 12X60.5 6X15.9

1.5X3.75 2.5X5 6X17.5
10X33 2X3.85 6X20.4
10X37.5 2X4.75 6X25
10X43 3X6.25 7.5X21.45
10X48 3X8.63 7.5X25
12X40 4X11.5 9X27.35
12X45 4X9.2 9X35
12X50 5X12.7
12X53 5X17.5

Profile library Checked sections Section data 213

FULL RECTANGULAR SECTION

FL

Formcode 7
Description Flat bar (Flachstahl)
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.68-69
Revision date 16/09/02
By CVL
PBD file FL.PBD
Code DIN 1017

y
Z

Checked properties

Property SCIA Source

number symbol symbol

Checked variables

SCIA Source
symbol symbol
B b
H s

Checked sections

Profile library Checked sections Section data 214

100X10 120X13 140X25
100X11 120X15 140X30
100X12 120X16 140X35
100X13 120X20 140X40
100X14 120X25 140X50
100X15 120X30 140X8
100X16 120X40 14X5
100X20 120X50 14X6
100X25 120X60 14X7
100X30 120X8 14X8
100X40 12X5 150X10
100X5 12X6 150X11
100X50 130X10 150X12
100X6 130X11 150X13
100X6.5 130X12 150X14
100X60 130X13 150X15
100X8 130X14 150X16
10X5 130X15 150X20
110X10 130X16 150X25
110X11 130X20 150X30
110X12 130X25 150X40
110X13 130X30 150X50
110X14 130X40 150X60
110X15 130X50 150X8
110X16 130X8 15X10
110X20 130X9 15X5
110X25 13X5 15X6
110X30 13X6 15X7
110X40 13X6.5 15X8
110X50 13X7 16X10
110X8 13X8 16X11
110X9 13X9 16X5
11X5 140X10 16X6
11X6 140X12 16X6.5
120X10 140X15 16X7
120X11 140X16 16X8
120X12 140X20 16X9

Profile library Checked sections Section data 215

17X11 22X5 28X6.5
17X5 22X6 28X7
17X6 22X6.5 28X8
17X7 22X7 30X10
17X8 22X8 30X12
18X10 25X10 30X13
18X11 25X12 30X14
18X5 25X13 30X15
18X6 25X14 30X16
18X6.5 25X15 30X18
18X7 25X16 30X20
18X8 25X5 30X22
18X9 25X6 30X25
19X11 25X6.5 30X5
19X13 25X7 30X6
19X5 25X8 30X6.5
19X6 26X10 30X7
19X7 26X12 30X8
19X8 26X13 30X9
19X9 26X14 32X10
20X10 26X15 32X12
20X12 26X16 32X13
20X13 26X18 32X14
20X15 26X20 32X15
20X5 26X5 32X16
20X6 26X6 32X20
20X6.5 26X6.5 32X22
20X7 26X7 32X25
20X8 26X8 32X5
20X9 28X10 32X6
22X10 28X12 32X6.5
22X11 28X13 32X8
22X12 28X14 35X10
22X13 28X16 35X12
22X14 28X18 35X13
22X15 28X5 35X14
22X17 28X6 35X15

Profile library Checked sections Section data 216

35X16 40X6.5 55X10
35X18 40X7 55X12
35X20 40X8 55X13
35X22 40X9 55X14
35X25 45X10 55X15
35X5 45X12 55X16
35X6 45X13 55X18
35X6.5 45X14 55X20
35X7 45X15 55X22
35X8 45X16 55X25
38X10 45X20 55X30
38X5 45X22 55X5
38X6 45X25 55X6
38X6.5 45X30 55X6.5
38X8 45X5 55X8
38x12 45X6 60X10
38x13 45X6.5 60X12
38x14 45X7 60X13
38x15 45X8 60X15
38x16 50X10 60X16
38x18 50X12 60X18
38x20 50X13 60X20
38x22 50X14 60X22
38x25 50X15 60X25
40X10 50X16 60X30
40X12 50X18 60X35
40X13 50X20 60X40
40X14 50X22 60X5
40X15 50X25 60X50
40X16 50X30 60X6
40X18 50X40 60X6.5
40X20 50X5 60X7
40X22 50X6 60X8
40X25 50X6.5 60X9
40X30 50X7 65X10
40X5 50X8 65X12
40X6 50X9 65X13

Profile library Checked sections Section data 217

65X15 70X7 80X5
65X16 70X8 80X50
65X20 75X10 80X6
65X22 75X12 80X6.5
65X25 75X13 80X60
65X30 75X15 80X7
65X40 75X16 80X8
65X5 75X20 90X10
65X6 75X25 90X11
65X6.5 75X30 90X12
65X8 75X35 90X13
65X9 75X40 90X15
70X10 75X5 90X16
70X12 75X6 90X18
70X13 75X6.5 90X20
70X15 75X60 90X25
70X16 75X8 90X30
70X18 80X10 90X40
70X20 80X11 90X5
70X22 80X12 90X50
70X25 80X13 90X6
70X30 80X15 90X6.5
70X35 80X16 90X60
70X40 80X20 90X8
70X5 80X25 90X9
70X50 80X30
70X6 80X35
70X6.5 80X40

Profile library Checked sections Section data 218

BRFL

Formcode 7
Description Wide Flat bar (Breitflachstahl)
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.71
Revision date 16/09/02
By CVL
PBD file BRFL.PBD
Code DIN 59200

Z y

Checked properties

Property SCIA Source

number symbol symbol

Checked variables

SCIA Source
symbol symbol
B b
H s

Checked sections

1000X10 1000X14 1000X18

1000X100 1000X15 1000X20
1000X12 1000X16 1000X25

Profile library Checked sections Section data 219

1000X30 1200X16 1300X25
1000X35 1200X18 1300X30
1000X4 1200X20 1300X35
1000X40 1200X25 1300X40
1000X45 1200X30 1300X45
1000X5 1200X35 1300X5
1000X50 1200X4 1300X50
1000X6 1200X40 1300X6
1000X60 1200X45 1300X60
1000X8 1200X5 1300X8
1000X80 1200X50 1300X80
100X5 1200X6 1400X10
1100X10 1200X60 1400X100
1100X100 1200X8 1400X12
1100X12 1200X80 1400X14
1100X14 1250X10 1400X15
1100X15 1250X12 1400X16
1100X16 1250X15 1400X18
1100X18 1250X20 1400X20
1100X20 1250X25 1400X25
1100X25 1250X30 1400X30
1100X30 1250X4 1400X35
1100X35 1250X40 1400X40
1100X4 1250X5 1400X45
1100X40 1250X50 1400X5
1100X45 1250X6 1400X50
1100X5 1250X60 1400X6
1100X50 1250X8 1400X60
1100X6 1250X80 1400X8
1100X60 1300X10 1400X80
1100X8 1300X100 1500X10
1100X80 1300X12 1500X100
1200X10 1300X14 1500X12
1200X100 1300X15 1500X14
1200X12 1300X16 1500X15
1200X14 1300X18 1500X16
1200X15 1300X20 1500X18

Profile library Checked sections Section data 220

1500X20 160X4 1750X30
1500X25 160X40 1750X35
1500X30 160X45 1750X40
1500X35 160X5 1750X45
1500X40 160X50 1750X5
1500X45 160X6 1750X50
1500X5 160X60 1750X6
1500X50 160X8 1750X60
1500X6 160X80 1750X8
1500X60 170X10 1750X80
1500X8 170X100 180X10
1500X80 170X12 180X100
151X10 170X14 180X12
151X12 170X15 180X14
151X15 170X16 180X15
151X20 170X18 180X16
151X25 170X20 180X18
151X30 170X25 180X20
151X4 170X30 180X25
151X40 170X35 180X30
151X5 170X40 180X35
151X50 170X45 180X4
151X6 170X5 180X40
151X60 170X50 180X45
151X8 170X6 180X5
151X80 170X60 180X50
160X10 170X8 180X6
160X100 170X80 180X60
160X12 1750X10 180X8
160X14 1750X100 180X80
160X15 1750X12 190X10
160X16 1750X14 190X100
160X18 1750X15 190X12
160X20 1750X16 190X14
160X25 1750X18 190X15
160X30 1750X20 190X16
160X35 1750X25 190X18

Profile library Checked sections Section data 221

190X20 200X18 240X14
190X25 200X20 240X15
190X30 200X25 240X16
190X35 200X30 240X18
190X40 200X35 240X20
190X45 200X4 240X25
190X5 200X40 240X30
190X50 200X45 240X35
190X6 200X5 240X4
190X60 200X50 240X40
190X8 200X6 240X45
190X80 200X60 240X5
2000X10 200X8 240X50
2000X100 200X80 240X6
2000X12 220X10 240X60
2000X14 220X100 240X8
2000X15 220X12 240X80
2000X16 220X14 250X10
2000X18 220X15 250X100
2000X20 220X16 250X12
2000X25 220X18 250X14
2000X30 220X20 250X15
2000X35 220X25 250X16
2000X40 220X30 250X18
2000X45 220X35 250X20
2000X5 220X4 250X25
2000X50 220X40 250X30
2000X6 220X45 250X35
2000X60 220X5 250X4
2000X8 220X50 250X40
2000X80 220X6 250X45
200X10 220X60 250X5
200X100 220X8 250X50
200X12 220X80 250X6
200X14 240X10 250X60
200X15 240X100 250X8
200X16 240X12 250X80

Profile library Checked sections Section data 222

260X10 280X60 340X12
260X100 280X8 340X15
260X12 280X80 340X20
260X14 300X10 340X25
260X15 300X100 340X30
260X16 300X12 340X4
260X18 300X14 340X40
260X20 300X15 340X5
260X25 300X16 340X50
260X30 300X18 340X6
260X35 300X20 340X60
260X4 300X25 340X8
260X40 300X30 340X80
260X45 300X35 350X10
260X5 300X4 350X100
260X50 300X40 350X12
260X6 300X45 350X14
260X60 300X5 350X15
260X8 300X50 350X16
260X80 300X6 350X18
280X10 300X60 350X20
280X100 300X8 350X25
280X12 300X80 350X30
280X14 320X10 350X35
280X15 320X12 350X4
280X16 320X15 350X40
280X18 320X20 350X45
280X20 320X25 350X5
280X25 320X30 350X50
280X30 320X4 350X6
280X35 320X40 350X60
280X4 320X5 350X8
280X40 320X6 350X80
280X45 320X60 360X10
280X5 320X8 360X12
280X50 320X80 360X15
280X6 340X10 360X20

Profile library Checked sections Section data 223

360X25 400X45 500X35
360X30 400X5 500X4
360X4 400X50 500X40
360X40 400X6 500X45
360X5 400X60 500X5
360X50 400X8 500X50
360X6 400X80 500X6
360X60 450X10 500X60
360X8 450X100 500X8
360X80 450X12 500X80
380X10 450X14 550X10
380X12 450X15 550X100
380X15 450X16 550X12
380X20 450X18 550X14
380X25 450X20 550X15
380X30 450X25 550X16
380X4 450X30 550X18
380X40 450X35 550X20
380X5 450X4 550X25
380X50 450X40 550X30
380X6 450X45 550X35
380X60 450X5 550X4
380X8 450X50 550X40
380X80 450X6 550X45
400X10 450X60 550X5
400X100 450X8 550X50
400X12 450X80 550X6
400X14 500X10 550X60
400X15 500X100 550X8
400X16 500X12 550X80
400X18 500X14 600X10
400X20 500X15 600X100
400X25 500X16 600X12
400X30 500X18 600X14
400X35 500X20 600X15
400X4 500X25 600X16
400X40 500X30 600X18

Profile library Checked sections Section data 224

600X20 700X15 800X100
600X25 700X16 800X12
600X30 700X18 800X14
600X35 700X20 800X15
600X4 700X25 800X16
600X40 700X30 800X18
600X45 700X35 800X20
600X5 700X4 800X25
600X50 700X40 800X30
600X6 700X45 800X35
600X60 700X5 800X4
600X8 700X50 800X40
600X80 700X6 800X45
650X10 700X60 800X5
650X100 700X8 800X50
650X12 700X80 800X6
650X14 750X10 800X60
650X15 750X100 800X8
650X16 750X12 800X80
650X18 750X14 850X10
650X20 750X15 850X100
650X25 750X16 850X12
650X30 750X18 850X14
650X35 750X20 850X15
650X4 750X25 850X16
650X40 750X30 850X18
650X45 750X35 850X20
650X5 750X4 850X25
650X50 750X40 850X30
650X6 750X45 850X35
650X60 750X5 850X40
650X8 750X50 850X45
650X80 750X6 850X5
700X10 750X60 850X50
700X100 750X8 850X6
700X12 750X80 850X60
700X14 800X10 850X8

Profile library Checked sections Section data 225

850X80 900X45 950X20
900X10 900X5 950X25
900X100 900X50 950X30
900X12 900X6 950X35
900X14 900X60 950X40
900X15 900X8 950X45
900X16 900X80 950X5
900X18 950X10 950X50
900X20 950X100 950X6
900X25 950X12 950X60
900X30 950X14 950X8
900X35 950X15 950X80
900X4 950X16
900X40 950X18

S(RAIL)

Formcode 7
Description Rectangular Rail section
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.166
Revision date 16/09/02
By CVL
PBD file S(RAIL).PBD
Code

y
Z

Checked properties

Profile library Checked sections Section data 226

Remark : the properties are introcuded taking into account a 25% reduction of the rail height h.

Property SCIA Source

number symbol symbol

Checked variables
Remark : the variables are introcuded taking into account a 25% reduction of the rail height h.

SCIA Source
symbol symbol
B b
H h

Checked sections

50X30
60X30
60X40
65X45
70X40

Profile library Checked sections Section data 227

FULL CIRCULAR SECTION

RD

Formcode 11
Description Full Circular section
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.64
Revision date 16/09/02
By CVL
PBD file RD.PBD
Code DIN 1013 T1
z

Y y

Checked properties
Remark : the properties are introcuded taking into account a 25% reduction of the rail height h.

Property SCIA Source

number symbol symbol
1 A0 F

Checked variables
Remark : the variables are introcuded taking into account a 25% reduction of the rail height h.

SCIA Source
symbol symbol
D d

Profile library Checked sections Section data 228

Checked sections

10 20 42
100 200 44
110 21 45
12 22 47
120 23 48
13 24 50
130 25 52
14 26 53
140 27 55
15 28 60
150 30 63
16 31 65
160 32 70
17 34 75
170 35 8
18 36 80
180 37 85
19 38 90
190 40 95

Profile library Checked sections Section data 229

ASYMMETRIC I SECTION

IPY

Formcode 101
Description Rolled Asymmetric I section
Source CBLIA
Centre Belgo-Luxembourgeois dInformation de
lacier
6e uitgave
1973

Revision date 16/09/02

By CVL
PBD file IPY.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol

Checked variables

SCIA Source
symbol symbol

Profile library Checked sections Section data 230

Checked sections

160A
160B
200A
200B
240A
240B
270A
270B
270C

Profile library Checked sections Section data 231

Z SECTION

Formcode 102
Description Rolled Z section
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.60
Revision date 16/09/02
By CVL
PBD file Z.PBD
Code DIN 1027

ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 F
2 iy iy
3 iz iz
8 Iy Iy
9 Iz Iz
10 Wy Wy
11 Wz Wz

Profile library Checked sections Section data 232

12 Iyz Iyz
14 It IT
15 I1 I
16 I2 I
26 CM CM

Checked variables

SCIA Source
symbol symbol
H h
B b
T tg
S ts
R1 r1
R2 r2

Checked sections

100
120
140
160
180
200
30
40
50
60
80

Profile library Checked sections Section data 233

COLD FORMED SECTION

KL

Formcode 110
Description Cold formed angles
Source Standard sections
Voest-Alpine Krems
08/97
pp.7-11
Revision date 03/06/00
By FVI
PBD file KL_VAK.PBD
Code DIN 59413
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A : Area of section
2 iy ix : Radius of gyration
3 iz iy : Radius of gyration
8 Iy Jx : Second Moment of Area
9 Iz Jy : Second Moment of Area
10 Wy Wx : Elastic section modulus
11 Wz Wy :Elastic section modulus
32 G G :Mass

Profile library Checked sections Section data 234

Checked variables

SCIA Source
symbol symbol
B b
H a
S t
R R

Checked sections

100X100X3.0 120X160X8.0 20X30X1.5

100X100X4.0 150X150X5.0 20X30X2.0
100X100X5.0 150X150X6.0 20X30X3.0
100X100X6.0 150X150X7.0 20X35X3.0
100X100X7.0 150X150X8.0 20X35X4.0
100X100X8.0 150X200X6.0 20X40X1.5
100X150X5.0 150X200X7.0 20X40X2.0
100X150X6.0 150X200X8.0 20X40X2.5
100X150X7.0 15X15X1.5 20X40X3.0
100X150X8.0 15X15X2.0 225X225X6.0
100X200X6.0 15X25X1.5 225X225X7.0
100X200X7.0 15X25X2.0 225X225X8.0
100X200X8.0 15X30X1.5 25X25X1.5
10X15X1.0 15X30X2.0 25X25X2.0
10X15X1.5 15X30X2.5 25X25X2.5
10X20X1.5 175X225X6.0 25X40X3.0
10X20X2.0 175X225X7.0 25X50X2.5
10X30X1.0 175X225X8.0 25X50X3.0
10X30X1.5 180X180X5.0 30X30X1.5
10X30X2.0 180X180X6.0 30X30X2.0
120X120X4.0 180X180X7.0 30X30X2.5
120X120X5.0 180X180X8.0 30X30X3.0
120X120X6.0 200X200X6.0 30X40X3.0
120X120X7.0 200X200X7.0 30X40X4.0
120X120X8.0 200X200X8.0 30X45X3.0
120X160X6.0 20X20X1.5 30X45X4.0
120X160X7.0 20X20X2.0 30X50X2.0

Profile library Checked sections Section data 235

30X50X2.5 40X80X6.0 60X80X5.0
30X50X3.0 45X45X2.0 60X80X6.0
30X50X4.0 45X45X2.5 60X80X7.0
30X60X2.5 45X45X3.0 60X80X8.0
30X60X3.0 45X45X4.0 70X70X2.5
30X70X3.0 45X45X5.0 70X70X3.0
30X70X4.0 50X100X4.0 70X70X4.0
30X70X5.0 50X100X5.0 70X70X5.0
35X35X1.5 50X100X6.0 70X70X6.0
35X35X2.0 50X100X7.0 70X70X7.0
35X35X2.5 50X100X8.0 75X150X5.0
35X35X3.0 50X50X2.0 75X150X6.0
35X35X4.0 50X50X2.5 75X150X7.0
35X70X4.0 50X50X3.0 75X150X8.0
40X100X4.0 50X50X4.0 80X160X5.0
40X100X5.0 50X50X5.0 80X160X6.0
40X100X6.0 50X90X5.0 80X160X7.0
40X40X1.5 50X90X6.0 80X160X8.0
40X40X2.0 50X90X7.0 80X80X3.0
40X40X3.0 50X90X8.0 80X80X4.0
40X40X4.0 60X120X4.0 80X80X5.0
40X60X2.0 60X120X5.0 80X80X6.0
40X60X2.5 60X120X6.0 80X80X7.0
40X60X3.0 60X120X7.0 80X80X8.0
40X60X4.0 60X120X8.0 90X90X3.0
40X60X5.0 60X60X2.0 90X90X4.0
40X70X3.0 60X60X3.0 90X90X5.0
40X70X4.0 60X60X4.0 90X90X6.0
40X70X5.0 60X60X5.0 90X90X7.0
40X80X3.0 60X60X6.0 90X90X8.0
40X80X4.0 60X80X3.0
40X80X5.0 60X80X4.0

Profile library Checked sections Section data 236

CFLeq

Formcode 111
Description Cold Formed Angle section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02
By CVL
PBD file CFLeq.PBD
Code

ZLCS

z y

YLCS
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t

Profile library Checked sections Section data 237

15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
D h_1
T t_1
B B_1
R r_1

Checked sections

15x15x1.5 30x30x3 50x50x3

15x15x2 35x35x2 50x50x4
15x15x3 35x35x3 50x50x5
20x20x2 35x35x4 60x60x3
20x20x3 40x40x2 60x60x4
25x25x2 40x40x3 65x65x3
25x25x3 40x40x4 70x70x4
30x30x2 50x50x2 80x80x5

CFLue

Formcode 111
Description Cold Formed Angle section
Source CD-Rom Database Staalprofielen
januari 2000

Profile library Checked sections Section data 238

 Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02
By CVL
PBD file CFLue.PBD
Code
ZLCS

z
y
YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa

Profile library Checked sections Section data 239

30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
D h_1
T t_1
B B_1
R r_1

Checked sections

100x50x3 40x20x3 60x30x3

100x50x4 40x25x2 60x40x3
20x15x2 40x25x3 60x40x4
25x15x2 40x30x2 70x40x3
30x15x2 40x30x3 70x50x4
30x15x3 50x20x2 75x40x3
30x20x2 50x25x3 80x40x3
30x20x3 50x30x2 80x40x4
30x25x3 50x30x3 80x50x3
35x25x3 50x40x2 80x50x4
40x20x2 50x40x3 90x40x3

CFUeq

Formcode 112
Description Cold Formed Channel section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02

Profile library Checked sections Section data 240

By CVL
PBD file CFUeq.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source

Profile library Checked sections Section data 241

symbol symbol
H h_1
S t_1
B B_1
R r_1

Checked sections

100x100x100x4
10x10x10x1.5
12x12x12x1.5
12x12x12x2
15x15x15x1.5
15x15x15x2
18x18x18x1.5
18x18x18x2
20x20x20x1.5
20x20x20x2
20x20x20x3
22x22x22x2
23x23x23x1.5
23x23x23x2
25x25x25x1.5
25x25x25x2
25x25x25x2.5
25x25x25x3
28x28x28x1.5
30x30x30x1.5
30x30x30x2
30x30x30x2.5
30x30x30x3
32x32x32x2
35x35x35x3
36x36x36x2
40x40x40x2
40x40x40x3
40x40x40x4
40x40x40x5

Profile library Checked sections Section data 242

45x45x45x3
50x50x50x2
50x50x50x3
50x50x50x4
50x50x50x5
60x60x60x3
60x60x60x4
60x60x60x5
70x70x70x4
80x80x80x4

CFUue

Formcode 112
Description Cold Formed Channel section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02
By CVL
PBD file CFUue.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol

Profile library Checked sections Section data 243

1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
H h_1
S t_1
B B_1
R r_1

Checked sections

10x20x10x2 19x13x19x1.5 20x50x20x1.5

12x36x12x2 20x15x20x1.5 20x50x20x2
15x20x15x2 20x30x20x2 20x50x20x3
15x25x15x1.5 20x30x20x3 20x70x20x2
15x25x15x2 20x34x20x2 25x15x25x2
15x30x15x2 20x40x20x2 25x20x25x2
15x30x15x3 20x40x20x3 25x40x25x2
15x40x15x2 20x45x20x4 25x40x25x3

Profile library Checked sections Section data 244

25x50x25x2 40x50x40x2 50x160x50x4
25x50x25x3 40x50x40x3 50x160x50x5
25x70x25x3 40x50x40x4 50x180x50x4
30x100x30x3 40x60x40x2 50x30x50x2
30x100x30x4 40x60x40x3 50x30x50x3
30x20x30x1.5 40x60x40x4 50x37x50x3
30x20x30x2 40x65x40x4 50x40x50x3
30x35x30x3 40x65x40x5 50x60x50x3
30x40x30x2 40x70x40x3 50x70x50x4
30x40x30x3 40x70x40x4 50x80x50x3
30x50x30x2 40x80x40x3 50x80x50x4
30x50x30x3 40x80x40x4 50x80x50x5
30x55x30x2 40x90x40x3 50x80x50x6
30x55x30x5 40x90x40x4 54x28x54x3
30x60x30x2 41x133x41x3 60x100x60x4
30x60x30x3 42.5x65x42.5x4 60x100x60x5
30x60x30x4 42x65x42x5 60x100x60x6
30x70x30x2 45x80x45x3 60x120x60x4
30x70x30x2.5 45x80x45x4 60x120x60x5
30x70x30x3 45x80x45x5 60x120x60x6
30x80x30x3 45x80x45x6 60x140x60x4
30x90x30x2.25 48x33x48x3 60x140x60x5
30x90x30x3 50x100x50x3 60x140x60x6
32x44x32x3 50x100x50x4 60x160x60x4
35x180x35x4 50x100x50x5 60x160x60x5
35x22x35x2 50x100x50x6 60x160x60x6
35x25x35x2 50x110x50x3 60x180x60x4
35x70x35x3 50x110x50x4 60x180x60x5
35x70x35x4 50x110x50x5 60x200x60x4
40x100x40x3 50x120x50x3 60x200x60x5
40x100x40x4 50x120x50x4 60x200x60x6
40x100x40x5 50x120x50x5 60x40x60x3
40x140x40x3 50x120x50x6 60x80x60x6
40x20x40x2 50x140x50x4 65x140x65x6
40x30x40x2 50x140x50x5 65x160x65x6
40x30x40x3 50x150x50x4 70x160x70x4
40x45x40x2 50x150x50x5 70x160x70x5

Profile library Checked sections Section data 245

70x200x70x5 80x140x80x3 80x200x80x4
70x50x70x4 80x140x80x4 80x200x80x5

CFZ

Formcode 113
Description Cold Formed Z section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02
By CVL
PBD file CFZ.PBD
Code

ZLCS

z y

YLCS

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el

Profile library Checked sections Section data 246

11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b_1/2+t_1/2
H h_1
S t_1
R r_1

Checked sections

20x30x20x2
20x40x30x3
30x40x30x3
30x50x30x3

CFC

Formcode 114
Description Cold Formed C section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02

Profile library Checked sections Section data 247

By CVL
PBD file CFC.PBD
Code
z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source

Profile library Checked sections Section data 248

symbol symbol
B b_1
D t_1
R r_1
H h_1
A

Checked sections

100x50x16x3
25x25x7.5x2
25x25x7x1.5
30x15x8x2
30x30x10x2
30x30x8.5x2
30x50x10x2
40x20x10x2
80x40x16x2
80x40x16x3

CFOmega

Formcode 115
Description Cold Formed section
Source CD-Rom Database Staalprofielen
januari 2000

Staalprofielen
deel 5 (Over)spannend staal
Staalbouwkundig Genootschap 1998
Revision date 16/09/02
By CVL
PBD file CFOmega.PBD
Code

Profile library Checked sections Section data 249

 z

y
Z

Checked properties

Property SCIA Source

number symbol symbol
1 A0 A
2 iy ir_y
3 iz ir_z
4 cz z_zp
5 cy y_zp
8 Iy I_y
9 Iz I_zz
10 Wy W_y1_el, W_y2_el
11 Wz W_z1_el, W_z2_el
14 It I_t
15 I1 I_u
16 I2 I_v
19 a alfa
20 V0 A_L
22 Dy u_o, y_o
23 Dz v_o, z_o
26 CM I_wa
30 Mpy W_y_pl x 240 N/mm
31 Mpz W_z_pl x 240 N/mm

Checked variables

SCIA Source
symbol symbol
B b_2
H h_1

Profile library Checked sections Section data 250

A1 b_1/2-b_2/2+t_1
A2 b_1/2-b_2/2+t_1
R r_1
S t_1

Checked sections

45x20x20x2
45x40x24.5x2
48x35x25x2
55x47x30x2
65x40x30x2.5
70x38x38x2.5
72x40x30x2
75x60x37x3
85x25x40x2.5

C(MET)

Formcode 114
Description Cold Formed C section
Source Metsec Building Products Limited
ZED Purlins & C-sections
2001
Revision date 16/12/02
By CVL
PBD file C(MET).PBD
Code

Profile library Checked sections Section data 251

 z

Y y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area
8 Iy Ixx
9 Iz Iyy

Checked variables

SCIA Source
symbol symbol
D D
T t
B B
R t
L L

Checked sections

142/14 172/16 202/18

142/15 172/18 202/20
142/16 172/20 202/23
142/18 172/23 202/25
142/20 172/25 232/16
172/14 202/15 232/18
172/15 202/16 232/20

Profile library Checked sections Section data 252

232/23 262/25 342/25
232/25 262/29 342/29
262/18 302/23 342/32
262/20 302/25
262/23 302/29

Z(MET)

Formcode 110
Description Cold Formed ZED section
Source Metsec Building Products Limited
ZED Purlins & C-sections
2001
Revision date 16/12/02
By CVL
PBD file Z(MET).PBD
Code

ZLCS

YLCS
y

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area
8 Iy Ixx
9 Iz Iyy

Checked variables

Profile library Checked sections Section data 253

SCIA Source
symbol symbol
D D
T t
TF Top Flange
BF Bottom Flange
R t
TL B
BL A

Checked sections

142/14 202/15 262/20

142/15 202/16 262/23
142/16 202/18 262/25
142/18 202/20 262/29
142/20 202/23 302/23
172/14 202/25 302/25
172/15 232/16 302/29
172/16 232/18 342/25
172/18 232/20 342/29
172/20 232/23 342/32
172/23 232/25
172/25 262/18

E(MET)

Formcode 110
Description Cold Formed section - eave beam
Source Metsec Building Products Limited
ZED Purlins & C-sections
2001
Revision date 16/12/02
By CVL
PBD file E(MET).PBD
Code

Profile library Checked sections Section data 254

 ZLCS

z
Z

y YLCS
Y

Checked properties

Checked variables

SCIA Source
symbol symbol
D A
T t
B 100 mm
R t
L 23 mm
A Angle

Checked sections

170/20/0 170/20/26 170/23/20

170/20/2 170/20/28 170/23/22
170/20/4 170/20/30 170/23/24
170/20/6 170/23/0 170/23/26
170/20/8 170/23/2 170/23/28
170/20/10 170/23/4 170/23/30
170/20/12 170/23/6 230/20/0
170/20/14 170/23/8 230/20/2
170/20/16 170/23/10 230/20/4
170/20/18 170/23/12 230/20/6
170/20/20 170/23/14 230/20/8
170/20/22 170/23/16 230/20/10
170/20/24 170/23/18 230/20/12

Profile library Checked sections Section data 255

230/20/14 270/25/10 330/29/6
230/20/16 270/25/12 330/29/8
230/20/18 270/25/14 330/29/10
230/20/20 270/25/16 330/29/12
230/20/22 270/25/18 330/29/14
230/20/24 270/25/20 330/29/16
230/20/26 270/25/22 330/29/18
230/20/28 270/25/24 330/29/20
230/20/30 270/25/26 330/29/22
230/25/0 270/25/28 330/29/24
230/25/2 270/25/30 330/29/26
230/25/4 270/29/0 330/29/28
230/25/6 270/29/2 330/29/30
230/25/8 270/29/4 330/32/0
230/25/10 270/29/6 330/32/2
230/25/12 270/29/8 330/32/4
230/25/14 270/29/10 330/32/6
230/25/16 270/29/12 330/32/8
230/25/18 270/29/14 330/32/10
230/25/20 270/29/16 330/32/12
230/25/22 270/29/18 330/32/14
230/25/24 270/29/20 330/32/16
230/25/26 270/29/22 330/32/18
230/25/28 270/29/24 330/32/20
230/25/30 270/29/26 330/32/22
270/25/0 270/29/28 330/32/24
270/25/2 270/29/30 330/32/26
270/25/4 330/29/0 330/32/28
270/25/6 330/29/2 330/32/30
270/25/8 330/29/4

Profile library Checked sections Section data 256

SADEFC

Formcode 114
Description Cold Formed C section
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFC.PBD
Code
z

Checked properties

Checked variables

SCIA Source
symbol symbol
H H
T T
B B
R 7 mm
L C

Checked sections

100X1.00 100X2.00 150X2.00

100X1.25 100X2.50 150X2.50
100X1.50 150X1.50 150x1.25
100X1.75 150X1.75 200X1.50

Profile library Checked sections Section data 257

200X2.00 200X2.50

SADEFCP

Formcode 110
Description Cold Formed C-plus section
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFCP.PBD
Code

Checked properties

Checked variables

SCIA Source
symbol symbol
D H
T t
B B
R 7 mm
B1 t + 12 mm
D1 C
RR 0.349 rad

Checked sections

Profile library Checked sections Section data 258

150X2.00 250X2.50 350X2.50
150X2.50 250X3.00 350X3.00
150X3.00 300X2.00 350X4.00
200X1.50 300X2.50 450X3.00
200X2.00 300X3.00 450X4.00
200X3.00 300X4.00 450X5.00
250X2.00 350X2.00

SADEFS

Formcode 110
Description Cold Formed Sigma section
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFS.PBD
Code

Checked properties

Checked variables

SCIA Source
symbol symbol

Profile library Checked sections Section data 259

B B
B1 K
D H
D1 HE
D2
D3 C
T t
R 4 mm

Checked sections

140X1.50 170X1.75 200X2.00

140X1.75 170X2.00 200X2.50
140X2.00 200X1.50
170X1.50 200X1.75

SADEFSP

Formcode 110
Description Cold Formed Sigma Plus section
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFSP.PBD
Code

Profile library Checked sections Section data 260

Checked properties

Checked variables

SCIA Source
symbol symbol
B B
B1 K
B2 t + 12 mm
D H
D1 HE
D2
D3 C
T t
R 4 mm
RR 0.35 rad

Checked sections

250X1.50 300X3.00 420X2.00

250X1.75 300X4.00 420X2.50
250X2.00 350X1.75 420X3.00
250X2.50 350X2.00 420X4.00
300X1.75 350X2.50 420X5.00
300X2.00 350X3.00
300X2.50 350X4.00

SADEFSE

Formcode 110
Description Cold Formed Sigma section eave beam
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFSE.PBD

Profile library Checked sections Section data 261

Code

ZLCS

y YLCS

Checked properties

Checked variables

SCIA Source
symbol symbol
B B
B1 26.5 mm
D H
D1 HE
D2
D3 C
T t
A alfa
R 4 mm

Checked sections

200X2.00D00 200X2.00D06 200X2.00D15

200X2.00D03 200X2.00D10 200X2.00D20

SADEFSEP

Formcode 110

Profile library Checked sections Section data 262

Description Cold Formed Sigma Plus section eave beam
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFSEP.PBD
Code
ZLCS

y YLCS

Checked properties

Checked variables

SCIA Source
symbol symbol
B B
B1 K
B2 t + 12 mm
D H
D1 HE
D2
D3 C
T t
A alfa
R 4 mm
R2 0.35 rad

Checked sections

250X2.5D00 250X2.5D03 250X2.5D06

Profile library Checked sections Section data 263

250X2.5D10 300X3.0D06 350X4.0D03
250X2.5D15 300X3.0D10 350X4.0D06
250X2.5D20 300X3.0D15 350X4.0D10
300X3.0D00 300X3.0D20 350X4.0D15
300X3.0D03 350X4.0D00 350X4.0D20

SADEFZ

Formcode 110
Description Cold Formed ZED section
Source SADEF Modern Steel Prorducts
Bouwcomponenten en bouwsystemen voor de
industriebouw
April 2002
Revision date 03/01/03
By CVL
PBD file SADEFZ.PBD
Code

ZLCS

YLCS
y

Checked properties

Checked variables

SCIA Source
symbol symbol
B1 B1
B2 B2

Profile library Checked sections Section data 264

C C
D H
T t
R 7 mm

Checked sections

180X1.50 250X1.75 350X2.00

180X1.75 250X2.00 350X2.50
180X2.00 250X2.50 350X3.00
180X2.50 250X3.00 350X4.00
200X1.50 250X4.00 400X2.00
200X1.75 300X2.00 400X2.50
200X2.00 300X2.50 400X3.00
200X2.50 300X3.00
200X3.00 300X4.00

Profile library Checked sections Section data 265

MBA(PDF)

Formcode 110
Description Cold Formed Sigma section
Source Technisches Handbuch
Profil du Futur
MultiBeam & ZED sections
Revision date 05/03/04
By CVL
PBD file MBA(PDF).PBD
Code

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area
2 iy iy
3 iz iz
8 Iy Ixx
9 Iz Iyy
10 Wy Wz
11 Wz Wz

Checked variables

Profile library Checked sections Section data 266

SCIA Source
symbol symbol
B b
B1 25 mm
D h
D1 34 mm
D2 14 mm
D4 120 mm
150 mm
190 mm
T t
R 2*t

Checked sections

230/160 260/240 300/240

230/180 260/270 300/270
260/180 260/320 300/320
260/200 300/180

MBB(PDF)

Formcode 110
Description Cold Formed Sigma section
Source Technisches Handbuch
Profil du Futur
MultiBeam & ZED sections
Revision date 05/03/04
By CVL
PBD file MBB(PDF).PBD
Code

Profile library Checked sections Section data 267

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area
2 iy iy
3 iz iz
8 Iy Ixx
9 Iz Iyy
10 Wy Wz
11 Wz Wz

Checked variables

SCIA Source
symbol symbol
B b
B1 25 mm
D h
D1 34 mm
D2 12 mm
D4 10 mm
30 mm
60 mm
90 mm

Profile library Checked sections Section data 268

T t
R 2*t

Checked sections

120/150
140/150
170/155
200/160

MBC(PDF)

Formcode 110
Description Cold Formed Sigma section
Source Technisches Handbuch
Profil du Futur
MultiBeam & ZED sections
Revision date 05/03/04
By CVL
PBD file MBC(PDF).PBD
Code

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area
2 iy iy

Profile library Checked sections Section data 269

3 iz iz
8 Iy Ixx
9 Iz Iyy
10 Wy Wz
11 Wz Wz

Checked variables

SCIA Source
symbol symbol
B b
B1 25 mm
D h
D1 48 mm
D2 28 mm
D4 182 mm
212 mm
T t
R 2*t

Checked sections

320/200 320/400 350/320

320/240 350/200 350/400
320/270 350/240
320/320 350/270

Z(PDF)

Formcode 110
Description Cold formed ZED section
Source Technisches Handbuch
Profil du Futur
MultiBeam & ZED sections
Revision date 05/03/04
By CVL
PBD file Z(PDF).PBD
Code

Profile library Checked sections Section data 270

Checked properties

Property SCIA Source

number symbol symbol
1 A0 Area

Checked variables

SCIA Source
symbol symbol
D h
T t
TF b1
BF b2
R =t
TL c1
BL c2

Checked sections

140.150 220.150 260.320

170.150 240.180 300.180
180.150 (*) 260.180 300.200
180.200 (*) 260.200 300.240
200.150 (*) 260.240 300.270
200.200 (*) 260.270 300.320

Profile library Checked sections Section data 271

(*) taken from 'Wirtschaftliche Palette'.

RAIL SECTION

SA

Formcode 150
Description Rail section - Form A
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1
pp.165
Revision date 16/09/02
By CVL
PBD file SA.PBD
Code DIN 536 T1

Z
y
Y

Checked properties
Remark : the properties are introcuded taking into account a 25% reduction of the rail height h3.

Property SCIA Source

number symbol symbol
1 A0 Fa
4 cz exa
8 Iy Jxa
9 Iz Jya
10 Wy Wxa

Checked variables

Profile library Checked sections Section data 272

SCIA Source
symbol symbol
H1 h1
H2 h2
H3 h3
B1 b1
B2 b2
B3 b3
K k
F1 f1
F2 f2
F3 f3
R1 r1
R2 r2
R3 r3
R4 r4
R5 r5
A

Checked sections

100
120
45
55
65
75

SF

Formcode 151
Description Rail section - Form B
Source Stahl im Hochbau
Handbuch fr die Anwendung von Stahl im Hoch-
und Tiefbau
14.Auflage Band I / Teil 1

Profile library Checked sections Section data 273

 pp.166
Revision date 16/09/02
By CVL
PBD file SF.PBD
Code DIN 536 T2

ZLCS

y YLCS

Checked properties
Remark : the properties are introcuded taking into account a 25% reduction of the rail height h3.

Property SCIA Source

number symbol symbol
1 A0 A
4 cz ex
8 Iy Jx
9 Iz Jy
10 Wy Wx
11 Wz Wy

Checked variables

SCIA Source
symbol symbol
B k
K k
H 80 mm
B3 k- 30 mm
F1 19 mm
F3 17 mm
H1 40 mm
H2 42 mm

Profile library Checked sections Section data 274

R1 5 mm
R2 2 mm
R3 2.5 mm

Checked sections

100
120

Profile library Checked sections Section data 275