Scribd
Upload
204 views

Lifting Lug Calc

The document analyzes the stresses in a lug under horizontal and vertical conditions. Under horizontal conditions, the shear stress, bending stress, and combined stress in the lug are all below allowable values, indicating the lug is safe. Under vertical conditions, the shear stress and tensile stress are also below allowable values, indicating the lug is safe under this condition as well.

Uploaded by

shazan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
204 views

Lifting Lug Calc

The document analyzes the stresses in a lug under horizontal and vertical conditions. Under horizontal conditions, the shear stress, bending stress, and combined stress in the lug are all below allowable values, indicating the lug is safe. Under vertical conditions, the shear stress and tensile stress are also below allowable values, indicating the lug is safe under this condition as well.

Uploaded by

shazan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 HORIZONTAL CONDITION

a Shear stress in Lug

2
Shear Area 2 x (J-0.5 D) x T As = 14950 mm
2
Shear Stress in lug I * WL Ss = 5.52 Kg/mm
As
2
Allowable Shear Stress 0.45 x Sy Sas = 10.09 Kg/mm

HENCE SAFE
b Bending Stress in Lug

3
Section modulus Z = 2708333 mm
Bending Moment I x WL x a. M = 26400000 Kg-mm
2
Bending Stress M/Z Sb = 9.75 Kg/mm
2
Allowable Bending Stress 0.67 x Sy Sab = 15.02 Kg/mm

HENCE SAFE
c Combined Stress
2
Induced Combined Stress Sc = 12.240 Kg/mm
0.5 x Sb + 0.5 x (Sb2 + 4 x Ss 2 )1/2
2
Allowable Stress 0.9 xSy = 20.18 Kg/mm
HENCE SAFE

2 Vertical Condition

a Shear Stress in Lug

2
Shear Area 2 x (J-0.5 D) x T As = 14950 mm
2
Shear Stress I * WL Ss = 5.520 Kg/mm
As
2
Allowable Shear Stress 0.45 x Sy Sas = 10.090 Kg/mm
HENCE SAFE

b Tensile Stress in Lug

2
Resisting Area (w-D) x T At = 24050 mm
2
Tensile Stress WL x I St = 3.43 Kg/mm
At
2
Allowable Tensile Stress 0.7 x Sy Sat = 15.690 Kg/mm

HENCE SAFE

You might also like