Scribd
Upload
698 views1 page

Electronic Toe Load Measuring Device

The document describes an electronic toe load measuring device that provides direct readings in kilograms of the toe load on elastic rail clips. It is compact, lightweight, safe to handle, and faster than mechanical counterparts. The device uses a spring-loaded gap sensor to automatically measure peak toe load values and includes attachments to pull clips in a uniform manner. Technical specifications include a 2000kg capacity load cell with 1kg resolution, 5.5-5.65V operation, and microcontroller-based auto calibration.

Uploaded by

ศิษย์เก่า ทีเจพี
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
698 views1 page

Electronic Toe Load Measuring Device

The document describes an electronic toe load measuring device that provides direct readings in kilograms of the toe load on elastic rail clips. It is compact, lightweight, safe to handle, and faster than mechanical counterparts. The device uses a spring-loaded gap sensor to automatically measure peak toe load values and includes attachments to pull clips in a uniform manner. Technical specifications include a 2000kg capacity load cell with 1kg resolution, 5.5-5.65V operation, and microcontroller-based auto calibration.

Uploaded by

ศิษย์เก่า ทีเจพี
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LAKSHMI BRAND ELECTRONIC TOE LOAD MEASURING DEVICE

Specification no: TM/SM/ELTMD/218 Rev. 01 of 2003

INTRODUCTION: - Electronic Toe Load Measuring Device is an efficient tool in the hands of
Permanent Way Engineers to determine the actual toe load of any Elastic Rail Clip. This Unit gives direct
reading of the toe load in terms of Kilograms on its alphanumeric LCD Display. The whole unit is Safe to
Handle, compact, rugged, and its light weight is an additional advantage over its Mechanical Counterpart.
The device is provided with a Spring Loaded Gap Sensing Device which automatically freezes the
required peak value of the toe. A set of Link Hanger, Balancing Legs, and Thrust Bearing & Tongs is
provided for pulling the Clip in a uniform and balanced manner. Only 4-5 minutes time is required for
installation of device on track, Measurement of reading and removal of device from the line.

TECHNICAL DATA:

1. Capacity of Load Cell -: 2000K.g


2. Type of Load Cell -: Compression Type / Stainless Steel
3. Accuracy -: + 20K.g
4. Operating Voltage -: 5.5V to 5.65V
5. Resolution -: 1.0K.g
6. Display -: 16 character alpha numeric LCD display
7. Sensitivity -: Fast return to zero
8. Calibration -: Micro controller based auto calibration

ISOMETRIC DRAWING OF COMPLETE UNIT IN ASSEMBLED POSITION

You might also like