Code No: 117CH Set No.
1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, September - 2017
DIGITAL CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I. Choose the correct alternative:
1. For the successful reconstruction of signals :
a) Sampling frequency must be equal to the message signal
b) Sampling frequency must be greater than the message signal
c) Sampling frequency must be less than the message signal
d) Sampling frequency must be greater than or equal to the message signal [ ]
2. The first step required to convert analog signal to digital is :
a) Sampling b) Holding c) Reconstruction d) Quantization [ ]
3. If the z transform of x(n) is X(z) =z(8z-7)/4z2-7z+3, then the final value theorem is :
a) 1 b) 2 c) d) 0 [ ]
4. Final value theorem is used for:
a) All type of systems b) Stable systems
c) Unstable systems d) Marginally stable systems [ ]
5. The system having input x (n) related to output y(n) as y (n) = log |x (n)| is:
a) Nonlinear, causal, stable b) Linear, noncausal, stable
c) Nonlinear, causal, not stable d) Linear, noncausal, not stable [ ]
6. A continuous-time periodic signal x(t), having a period T, is convolved with itself. The resulting signal is
a) Not periodic b) Periodic having a period T
c) Periodic having a period 2T d) Periodic having a period T/2 [ ]
7. If the Fourier series coefficients of a signal are periodic then the signal must be
a) Continuous-time, periodic b) Discrete-time, periodic
c) Continuous-time, non-periodic d) Discrete-time, non-periodic [ ]
8. Kalmans test is for :
a) Observability b) Controllability
c) Optimality d) Observability and controllability [ ]
9. A system is said to be_________________, if every state can be completely identified by measurements
of the outputs at the finite time interval.
a) Controllable b) Observable
c) Cannot be determined d) Controllable and observable [ ]
10. Consider a system if represented by state space equation and x1 (t) =x2 (t), then the system is:
a) Controllable b) Uncontrollable c) Observable d) Unstable [ ]
Cont..2
Code No: 117CH :2: Set No. 1
II Fill in the Blanks
11. The z transform of the time function ( ) _______________
=0
12. The region of convergence of the z transform of a unit step function is ___________
13. If the region of convergence of 1 [] + 2 [] is 1/3 < || < 2/3 , then the region of convergences of 1
[] 2 [] includes _______________.
14. If A is a real symmetric matrix, then the eigen values are ______________.
15. The output response of a discrete-data system that is due to the input only is called the ___________
16. According to the property of state transition method, e0 is equal to _____
17. A closed form solution of the state space equations is easily obtained when the system matrix F is
_______
18. The transfer function Y(s)/U(s) of a system described by the state equations dx/dt=-2x+2u and y(t) = 0.5x
is__________________
19. The state model of a system in addition to state equations are ____________
20. The s plane and z plane are related as _____________
-oOo-
Code No: 117CH Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, September - 2017
DIGITAL CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I. Choose the correct alternative:
1. Final value theorem is used for:
a) All type of systems b) Stable systems
c) Unstable systems d) Marginally stable systems [ ]
2. The system having input x (n) related to output y(n) as y (n) = log |x (n)| is:
a) Nonlinear, causal, stable b) Linear, noncausal, stable
c) Nonlinear, causal, not stable d) Linear, noncausal, not stable [ ]
3. A continuous-time periodic signal x(t), having a period T, is convolved with itself. The resulting signal is
a) Not periodic b) Periodic having a period T
c) Periodic having a period 2T d) Periodic having a period T/2 [ ]
4. If the Fourier series coefficients of a signal are periodic then the signal must be
a) Continuous-time, periodic b) Discrete-time, periodic
c) Continuous-time, non-periodic d) Discrete-time, non-periodic [ ]
5. Kalmans test is for :
a) Observability b) Controllability
c) Optimality d) Observability and controllability [ ]
6. A system is said to be_________________, if every state can be completely identified by measurements
of the outputs at the finite time interval.
a) Controllable b) Observable
c) Cannot be determined d) Controllable and observable [ ]
7. Consider a system if represented by state space equation and x1 (t) =x2 (t), then the system is:
a) Controllable b) Uncontrollable c) Observable d) Unstable [ ]
8. For the successful reconstruction of signals :
a) Sampling frequency must be equal to the message signal
b) Sampling frequency must be greater than the message signal
c) Sampling frequency must be less than the message signal
d) Sampling frequency must be greater than or equal to the message signal [ ]
9. The first step required to convert analog signal to digital is :
a) Sampling b) Holding c) Reconstruction d) Quantization [ ]
10. If the z transform of x(n) is X(z) =z(8z-7)/4z2-7z+3, then the final value theorem is :
a) 1 b) 2 c) d) 0 [ ]
Cont..2
Code No: 117CH :2: Set No. 2
II Fill in the Blanks
11. If A is a real symmetric matrix, then the eigen values are ______________.
12. The output response of a discrete-data system that is due to the input only is called the ___________
13. According to the property of state transition method, e0 is equal to _____
14. A closed form solution of the state space equations is easily obtained when the system matrix F is
_______
15. The transfer function Y(s)/U(s) of a system described by the state equations dx/dt=-2x+2u and y(t) = 0.5x
is__________________
16. The state model of a system in addition to state equations are ____________
17. The s plane and z plane are related as _____________
18. The z transform of the time function ( ) _______________
=0
19. The region of convergence of the z transform of a unit step function is ___________
20. If the region of convergence of 1 [] + 2 [] is 1/3 < || < 2/3 , then the region of convergences of 1
[] 2 [] includes _______________.
-oOo-
Code No: 117CH Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, September - 2017
DIGITAL CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I. Choose the correct alternative:
1. A continuous-time periodic signal x(t), having a period T, is convolved with itself. The resulting signal is
a) Not periodic b) Periodic having a period T
c) Periodic having a period 2T d) Periodic having a period T/2 [ ]
2. If the Fourier series coefficients of a signal are periodic then the signal must be
a) Continuous-time, periodic b) Discrete-time, periodic
c) Continuous-time, non-periodic d) Discrete-time, non-periodic [ ]
3. Kalmans test is for :
a) Observability b) Controllability
c) Optimality d) Observability and controllability [ ]
4. A system is said to be_________________, if every state can be completely identified by measurements
of the outputs at the finite time interval.
a) Controllable b) Observable
c) Cannot be determined d) Controllable and observable [ ]
5. Consider a system if represented by state space equation and x1 (t) =x2 (t), then the system is:
a) Controllable b) Uncontrollable c) Observable d) Unstable [ ]
6. For the successful reconstruction of signals :
a) Sampling frequency must be equal to the message signal
b) Sampling frequency must be greater than the message signal
c) Sampling frequency must be less than the message signal
d) Sampling frequency must be greater than or equal to the message signal [ ]
7. The first step required to convert analog signal to digital is :
a) Sampling b) Holding c) Reconstruction d) Quantization [ ]
8. If the z transform of x(n) is X(z) =z(8z-7)/4z2-7z+3, then the final value theorem is :
a) 1 b) 2 c) d) 0 [ ]
9. Final value theorem is used for:
a) All type of systems b) Stable systems
c) Unstable systems d) Marginally stable systems [ ]
10. The system having input x (n) related to output y(n) as y (n) = log |x (n)| is:
a) Nonlinear, causal, stable b) Linear, noncausal, stable
c) Nonlinear, causal, not stable d) Linear, noncausal, not stable [ ]
Cont..2
Code No: 117CH :2: Set No. 3
II Fill in the Blanks
11. According to the property of state transition method, e0 is equal to _____
12. A closed form solution of the state space equations is easily obtained when the system matrix F is
_______
13. The transfer function Y(s)/U(s) of a system described by the state equations dx/dt=-2x+2u and y(t) = 0.5x
is__________________
14. The state model of a system in addition to state equations are ____________
15. The s plane and z plane are related as _____________
16. The z transform of the time function ( ) _______________
=0
17. The region of convergence of the z transform of a unit step function is ___________
18. If the region of convergence of 1 [] + 2 [] is 1/3 < || < 2/3 , then the region of convergences of 1
[] 2 [] includes _______________.
19. If A is a real symmetric matrix, then the eigen values are ______________.
20. The output response of a discrete-data system that is due to the input only is called the ___________
-oOo-
Code No: 117CH Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B.Tech. I Sem., I Mid-Term Examinations, September - 2017
DIGITAL CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
I. Choose the correct alternative:
1. Kalmans test is for :
a) Observability b) Controllability
c) Optimality d) Observability and controllability [ ]
2. A system is said to be_________________, if every state can be completely identified by measurements
of the outputs at the finite time interval.
a) Controllable b) Observable
c) Cannot be determined d) Controllable and observable [ ]
3. Consider a system if represented by state space equation and x1 (t) =x2 (t), then the system is:
a) Controllable b) Uncontrollable c) Observable d) Unstable [ ]
4. For the successful reconstruction of signals :
a) Sampling frequency must be equal to the message signal
b) Sampling frequency must be greater than the message signal
c) Sampling frequency must be less than the message signal
d) Sampling frequency must be greater than or equal to the message signal [ ]
5. The first step required to convert analog signal to digital is :
a) Sampling b) Holding c) Reconstruction d) Quantization [ ]
6. If the z transform of x(n) is X(z) =z(8z-7)/4z2-7z+3, then the final value theorem is :
a) 1 b) 2 c) d) 0 [ ]
7. Final value theorem is used for:
a) All type of systems b) Stable systems
c) Unstable systems d) Marginally stable systems [ ]
8. The system having input x (n) related to output y(n) as y (n) = log |x (n)| is:
a) Nonlinear, causal, stable b) Linear, noncausal, stable
c) Nonlinear, causal, not stable d) Linear, noncausal, not stable [ ]
9. A continuous-time periodic signal x(t), having a period T, is convolved with itself. The resulting signal is
a) Not periodic b) Periodic having a period T
c) Periodic having a period 2T d) Periodic having a period T/2 [ ]
10. If the Fourier series coefficients of a signal are periodic then the signal must be
a) Continuous-time, periodic b) Discrete-time, periodic
c) Continuous-time, non-periodic d) Discrete-time, non-periodic [ ]
Cont..2
Code No: 117CH :2: Set No. 4
II Fill in the Blanks
11. The transfer function Y(s)/U(s) of a system described by the state equations dx/dt=-2x+2u and y(t) = 0.5x
is__________________
12. The state model of a system in addition to state equations are ____________
13. The s plane and z plane are related as _____________
14. The z transform of the time function ( ) _______________
=0
15. The region of convergence of the z transform of a unit step function is ___________
16. If the region of convergence of 1 [] + 2 [] is 1/3 < || < 2/3 , then the region of convergences of 1
[] 2 [] includes _______________.
17. If A is a real symmetric matrix, then the eigen values are ______________.
18. The output response of a discrete-data system that is due to the input only is called the ___________
19. According to the property of state transition method, e0 is equal to _____
20. A closed form solution of the state space equations is easily obtained when the system matrix F is
_______
-oOo-
