Scribd
Upload
42 views4 pages

Design of Cantilever Beam: Loads

cant beam design

Uploaded by

Mario Feghali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
42 views4 pages

Design of Cantilever Beam: Loads

cant beam design

Uploaded by

Mario Feghali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

PROJECT:

DESIGN OF CANTILEVER BEAM


Assume Breath of Beam = 230 mm

Assume Depth of Beam = 450 mm

Effective Span of Slab = 2.30 mt

Grade of Steel Fe = 415 N/mm 16.8 KN/m

Grade of Concrete M = 20 N/mm

Clear Cover = 25 mm

Loads: 2300 mm

Dead load = 2.588 KN/m

Live load = 0.75 KN/m

Floor finishes = 3.00 KN/m

6.3 KN/m

Load/mt rum = 6.3 x 2.30

= 16.8 KN/m

Maximum B.M. = 1.5 x 16.8 x 2.30


2

= 66.51 KN.mt

Effective depth required = 66.51 x 10 6


0.138 x 20 x 230

= 323.68 mm

Dia of Reinforcement = 16 mm

Effective depth d = 450 - 25 ###


-

= 417 mm Safe in B.M

Mu = 66.51 x 10 6
bd 230 x 417
PROJECT:

= 1.66

Pt from table 2 of SP:16 = 0.516 %

Ast Required = 494.7071 mm


PROJECT:

Provide ### - 16 Tor St & ### - 12 Tor Ext

Ast Provided = 628 mm

Pt = 0.65 %
Shear Check

Shear force = 1.5 x 16.76 x 2.3

57.83 KN

V = 57.83 x 10 3
bd 230 x 417

= 0.603 N/mm

Angle = 3.547

tc for 0.65 % Ast = 0.53 N/mm

tc bd = 0.532 x 230 x 417

= 51.00 KN

Vus = 57.83 - 51.00


d 41.7

= 0.164 KN/cm

Dia of Bar = 8 mm ###

No. of Legs = 2 No.


###
Spacing of Stirrups Required @ = 2215

2 - Legged ###Tor @ 200 mm C/C

Check for Deflection

Support Condition = 7

Pt of Tension renforcement @ mid span = 0.65 %

0.58*Fy*Ast Required/Ast Provided = 189.6 N/mm

Modification Factor = 1.321


PROJECT:

Effective Depth Required = 248.7 mm Safe in Deflection

You might also like