Scribd
Upload
2K views2 pages

Nissan Qashqai Door Finisher

The document provides instructions for removing and installing a front door finisher on a vehicle. It includes: 1) An exploded view diagram of the front door assembly with labeled parts. 2) Step-by-step instructions to remove the front door finisher, which include disengaging clips and removing parts like the inside handle escutcheon. 3) The removal process requires basic hand tools like a screwdriver and remover tool to disconnect the various clips and brackets that hold the finisher in place.

Uploaded by

nubbler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Nissan Qashqai Door Finisher

The document provides instructions for removing and installing a front door finisher on a vehicle. It includes: 1) An exploded view diagram of the front door assembly with labeled parts. 2) Step-by-step instructions to remove the front door finisher, which include disengaging clips and removing parts like the inside handle escutcheon. 3) The removal process requires basic hand tools like a screwdriver and remover tool to disconnect the various clips and brackets that hold the finisher in place.

Uploaded by

nubbler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DOOR FINISHER

< ON-VEHICLE REPAIR >


ON-VEHICLE REPAIR
DOOR FINISHER
FRONT DOOR FINISHER
FRONT DOOR FINISHER : Exploded View INFOID:0000000000892098

JMJIA0247ZZ

1. Power window switch front (Driver) 2. Front door grip 3. Front door finisher (LH)
4. Cap-Front door grip (LH) 5. Seal assembly front door inside (LH) 6. Cover front door inner (LH)
7. Front door panel 8. Power window switch rear (LH) 9. Inside handle escutcheon (rear LH)
10. Rear door finisher (LH) 11. Rear door panel 12. Cover rear door inner (LH)
13. Seal assembly rear door inside (LH)
: Clip
: Pawl
: Metal clip

FRONT DOOR FINISHER : Removal and Installation INFOID:0000000000892099

REMOVAL
1. Fully open door window.

INT-10
DOOR FINISHER
< ON-VEHICLE REPAIR >
2. Insert remover tool (A) at the bottom edge of cap-front door grip
to unclip the cap. A

: Pawl
B
3. Remove inside handle escutcheon cap.

JMJIA0248ZZ

D
4. Remove screws (B) holding front door grip in place using screw-
driver (A).
E

G
JMJIA0249ZZ

5. Hold front door grip in fully rotated position.Insert remover tool


H
(A) between front door grip and door finisher to disengage the
escutcheon retaining pawls to the door finisher.

: Pawl I

6. Remove inside handle escutcheon.


INT

JMJIA0250ZZ
K
7. Insert remover tool (A) between door finisher and door panel to
disengage door finisher mounting clips, starting from the bottom
and working to the top. L

: Clip
M

N
JMJIA0253ZZ
8. Disconnect harness connectors (A) for power window switch
front. O

JMJIA0254ZZ

INT-11

You might also like