Scribd
Upload
898 views1 page

WPQ Is 2062 Haresh Shah W1

This document is a Welder Performance Qualification record for welder Haresh Shah. It details the welding process, variables, and test results. The welder qualified using the gas tungsten arc welding process to manually weld an 8mm thick IS2062 GrB base material in the 1G position. Three layers were welded using 2.0mm and 2.5mm diameter ER70S2 filler metal. Bend tests were satisfactory and witnessed by two individuals. Radiographic testing was also performed and the welder qualified according to ASME Boiler and Pressure Vessel Code requirements.

Uploaded by

Anand Kesarkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
898 views1 page

WPQ Is 2062 Haresh Shah W1

This document is a Welder Performance Qualification record for welder Haresh Shah. It details the welding process, variables, and test results. The welder qualified using the gas tungsten arc welding process to manually weld an 8mm thick IS2062 GrB base material in the 1G position. Three layers were welded using 2.0mm and 2.5mm diameter ER70S2 filler metal. Bend tests were satisfactory and witnessed by two individuals. Radiographic testing was also performed and the welder qualified according to ASME Boiler and Pressure Vessel Code requirements.

Uploaded by

Anand Kesarkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

QW-484 WELDER PERFORMANCE QUALIFICATION (WPQ)

(See QW-301, Section IX, ASME BOILER AND PRESSURE VESSEL CODE)

Company Name : SAMARTH ENGINEERS By: Mr. Vikram Wakole


WPQ No : SE/WPQ/15-16/01 Rev.0 Date:25.08.15
WPS No. : SE/WPS/15-16/01 Rev.0 Date:25.08.15

Welders Name : Haresh Shah Welder No: W1


Welding Process : GTAW QW-256 Type: Manual
Base Material Used : IS2062 GrB Thickness: 8mm thk

Manual or Semi-Automatic Variables for each process (QW-350)


(QW-402) Backing : NA
(QW-403) ASME P.No.1 to P.No.1 : P1 to P1

(QW-404) Filler Metal Specification (SFA) : 5.18


Filler Metal F No. :6
AWS NO.(Class) : ER70S2
A.No. : 1
Size of Filler Metal : Dia.2.0 & 2.5 mm
Weld Deposit Thickness for each welding process : 1.6 mm
(QW-405 ) Welding Position : 1G
(QW-408 ) Backing Gas : Argon
(QW-409 ) GTAW welding current polarity : Straight/DCEP

Machine Welding Variables


Direct /Remote Visual control : Manual Control
Welding Position : 1G

Welding Parameters
Weld Layer Process Filler Metal Current Range Travel Heat
Speed Input
Class Dia. mm Type Volts Amp mm/min J/mm
Polarity
(Root Run) GTAW ER70S2 2.0 DCEP 20 175 131 ------
II Layer-Hot Pass GTAW ER70S2 2.5 DCEP 21 180 87 --------
III Layer-Capping GTAW ER70S2 2.0 DCEP 21 175 64 -------
Bend Test Results : Satisfactory.
Bend Test Report No : PLS_18H15_074/1 Dated 24.08.15 Perfect Laboratory Services,Chinchwad Pune
Lab Test Witnessed By : Mr. Anil Gaikwad(IRS) & Mr. Vikram Wakole(Samarth Engineers)
RT Report : INIS/RT/15-16/3818 of Industrial NDT & Inspection Services,Bhosari,Pune.

We certify that the statements in this record are correct and that the test coupons were prepared , welded and tested in accordance with
the requirement of Section .IX, ASME Code.Edn.2010.
Organization: Samarth Engineers, J-415, Pune.

Prepared By- Approved By-

Mr. Vikram Wakole Mr.Sanjay Raut


Dept-QA/QC-
Samarth Engineers MD-Samarth Engineers

You might also like