Data sheet for SINAMICS Power Module PM240-2
MLFB-Ordering data
6SL3210-1PE27-5UL0
Figure similar
Client order no. : Item no. :
Order no. : Consignment no. :
Offer no. : Project :
Remarks :
Rated data General tech. specifications
Input Power factor 0.95
Number of phases 3 AC Offset factor cos 0.99
Line voltage 380 ... 480 V 10 % Efficiency 0.98
Line frequency 47 ... 63 Hz Sound pressure level (1m) 72 dB
Rated current (LO) 70.00 A Power loss 1.01 kW
Rated current (HO) 62.00 A Ambient conditions
Output Cooling Internal air cooling
Number of phases 3 AC Cooling air requirement 0.055 m/s
Rated voltage 400 V Installation altitude 1000 m
Rated power (LO) 37.00 kW / 50.00 hp Ambient temperature
Rated power (HO) 30.00 kW / 40.00 hp Operation LO -20 ... 40 C (-4 ... 104 F)
Rated current (LO) 75.00 A Operation HO -20 ... 50 C (-4 ... 122 F)
Rated current (HO) 60.00 A Transport -40 ... 70 C (-40 ... 158 F)
Max. output current 120.00 A Storage -40 ... 70 C (-40 ... 158 F)
Pulse frequency 4 kHz
Relative humidity
Output frequency for vector control 0 ... 200 Hz
Max. operation 95 % RH, condensation not permitted
Output frequency for V/f control 0 ... 550 Hz
Overload capability
Low Overload (LO)
1.1 x rated output current (i.e. 110 % overload) for 57 s with a cycle time of 300 s 1.5 rated output current (i.e. 150 % overload) for 3 s with a cycle time of 300 s
High Overload (HO)
1.5 output current rating (i.e., 150 % overload) for 57 s with a cycle time of 300 s 2 output current rating (i.e., 200 % overload) for 3 s with a cycle time of 300 s
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Generated Fri Aug 18 20:15:06 CEST 2017
Page 1 of 2
Data sheet for SINAMICS Power Module PM240-2
MLFB-Ordering data
6SL3210-1PE27-5UL0
Figure similar
Mechanical data Connections
Degree of protection IP20 Line side
Size FSD Version screw-type terminal
Net weight 17.00 kg Conductor cross-section 10.00 ... 35.00 mm
Width 200.0 mm Motor end
Height 472.0 mm Version Screw-type terminals
Depth 237.0 mm Conductor cross-section 10.00 ... 35.00 mm
Converter losses to EN 50598-2* DC link (for braking resistor)
Efficiency class Version Screw-type terminals
IE2
Comparison with the reference converter (90% / Conductor cross-section 2.50 ... 16.00 mm
-55.32 %
100%)
PE connection Screw-type terminals
I Max. motor cable length
774.0 W (1.49 %) 904.0 W (1.74 %) 1112.0 W (2.14 %)
100% Shielded 200 m
Unshielded 300 m
Standards
447.0 W (0.86 %) 494.0 W (0.95 %) 561.0 W (1.08 %)
50%
UL, cUL, CE, C-Tick (RCM), SEMI F47
Compliance with standards
388.0 W (0.65 %) 359 W (0.69 %)
25%
CE marking Low-voltage directive 2006/95/EC
50% 90% f
The percentage values show the losses in relation to the rated apparent power of the converter.
The diagram shows the losses for the points (as per standard EN 50598) of the relative torque
generating current (I) over the relative motor stator frequency(f). The values are valid for the basic
version of the converter without options/components.
*converted values
Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Generated Fri Aug 18 20:15:06 CEST 2017
Page 2 of 2
