Allnet

ALL7950 SIP Phone

Quick User Guide

Version 1.01
Revision Control
Versionscontrol: Contains all available versions of the document

Datei: ALL7950 Manual_english V1.01.doc

Datum Version Name Status

22.12.04 0.01 Jrg Wagenlehner Draft
26.12.04 0.02 Jrg Wagenlehner Formatting, graphics, corrections
12.01.05 1.00 Jrg Wagenlehner Initial Release, multinational F/W
04.04.05 1.01 Jrg Wagenlehner Description for new firmware features added

Allnet ALL7950 User Manual 2

TABLE OF CONTENTS

1.0 INTRODUCTION .................................................................................................. 5

2.0 PACKAGE CONTENT.......................................................................................... 5
3.0 LIST OF FIGURES ............................................................................................... 5
3.0 LIST OF FIGURES ............................................................................................... 6
4.0 SUMMARY OF KEY FUNCTIONS ....................................................................... 7
5.0 CONNECTING THE IP PHONE ........................................................................... 8
6.0 IP PHONE SETUP ............................................................................................... 9
6.1 MENU SUMMARY ................................................................................................. 9
6.2 DISPLAY NAME .................................................................................................. 11
6.3 ADSL DIALUP ................................................................................................... 11
6.4 DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL) ......................................... 12
6.5 SNTP SERVER IP ............................................................................................. 14
6.6 DO NOT DISTURB .............................................................................................. 15
6.7 CF (CALL FORWARD) UNCONDITIONAL ................................................................ 15
6.8 CF (CALL FORWARD) USER BUSY ....................................................................... 15
6.9 CF (CALL FORWARD) NO ANSWER ...................................................................... 15
6.10 ANONYMOUS CALL ............................................................................................ 16
6.11 ANONY CALL REJ (ANONYMOUS CALL REJECTION) .............................................. 16
6.12 RINGING TYPE................................................................................................... 16
6.13 MAC ADDRESS ................................................................................................. 17
6.14 VERSION........................................................................................................... 17
6.15 LANGUAGE SELECTION ...................................................................................... 18
6.16 TIME FORMAT ................................................................................................... 18
6.17 VOLUME ADJUSTMENT ....................................................................................... 18
6.17.1 Ringer Volume ......................................................................................... 18
6.17.2 Speaker Volume ...................................................................................... 19
6.17.3 Handset Volume ...................................................................................... 19
7.0 USING THE CONFIGURATION MENU ............................................................. 20
7.1 ACCESSING CONFIGURATION MENU .................................................................... 20
7.2 BASIC SETTINGS ............................................................................................... 21
7.3 NETWORK SETTINGS DHCP ........................................................................... 22
7.4 NETWORK SETTINGS PPPOE .......................................................................... 22
7.5 NETWORK SETTINGS STATIC IP ....................................................................... 23
7.6 SIP SETTINGS SIP PHONE SETTINGS, REGISTRAR AND PROXY SERVER ............ 24
7.7 SIP SETTINGS MESSAGE SERVER ................................................................... 25
7.8 SIP SETTINGS OTHERS .................................................................................. 26
7.9 SIP USER SETTINGS ......................................................................................... 27
7.10 STUN & UPNP SETTINGS ................................................................................. 28
7.11 AUDIO SETTINGS AND QOS ................................................................................ 30

Allnet ALL7950 User Manual 3

 7.12 PHONE SETTINGS PHONE SETTINGS ................................................................ 31
7.13 PHONE SETTINGS TIMER ................................................................................. 32
7.14 SYSTEM LOG..................................................................................................... 33
7.15 PHONE BOOK .................................................................................................... 34
7.16 ONE TOUCH DIAL .............................................................................................. 34
7.17 FACTORY SETTINGS .......................................................................................... 35
7.18 FIRMWARE UPDATE ........................................................................................... 35
7.19 REBOOT SYSTEM .............................................................................................. 36
7.20 SUPPORT .......................................................................................................... 36
8.0 OPERATING THE PHONE................................................................................. 37
8.1 DIALING ............................................................................................................ 37
8.1.1 IP Address ............................................................................................... 37
8.1.2 SIP Number ............................................................................................. 37
8.1.3 SIP Number From Distinctive SIP Account .............................................. 38
8.2 SPEED DIALING ................................................................................................. 39
8.3 ANSWERING A PHONE CALL ............................................................................... 39
8.4 SWITCHING TO ANOTHER LINE ............................................................................ 39
8.5 MUTE ............................................................................................................... 39
8.6 CALL TRANSFER ................................................................................................ 40
8.7 REDIAL ............................................................................................................. 40
8.7.1 Last Dialed Number ................................................................................. 40
8.7.2 Through Call History ................................................................................ 41
8.8 ON HOLD .......................................................................................................... 41
8.9 CALL FORWARD ................................................................................................ 41
8.10 THREE WAY CONFERENCE ................................................................................. 42
9.0 USING THE PHONEBOOK ................................................................................ 43
9.1 DIALING FROM THE PHONEBOOK ......................................................................... 43
9.2 STORING A NUMBER .......................................................................................... 43
9.3 EDITING A NUMBER............................................................................................ 44
9.4 DELETING A NUMBER ......................................................................................... 44
10.0 TROUBLESHOOTING ...................................................................................... 45
11.0 SPECIFICATION ALL7950 SIP PHONE ........................................................... 47
12.0 CE APPROVAL ................................................................................................. 49

Allnet ALL7950 User Manual 4

1.0 INTRODUCTION
Voice over IP (also known as Internet Phone) is a technology that allows anyone to
make a telephone call over the Internet. This is a quick user guide for the ALL7950 SIP
Phone. It is intended to help you configure the telephone and have it ready to run within
a few minutes. Please follow the user guide carefully as troubleshooting the telephone
can be very difficult and time consuming.

2.0 PACKAGE CONTENT

The following materials are included in the package. Please check the package to
ensure that all the materials are listed below. Contact your supplier immediately if an
item is missing.

Ethernet Cable (1.8 meter)

IP Phone ALL7950 Power Adaptor (5V DC, 1.4A)

Allnet ALL7950 User Manual 5

 3.0 LIST OF FIGURES

Diagram for Allnet SIP Phone (Model: ALL7950)

(10) Down (1) 2 x 16 Characters

LCD Display
(11) Up

(2) OK / Right
(12) Cancel /
Left

(3) Menu
(13) Voice
(4) Mute/Function
(14) 3-Way
Conference (5) Transfer

(15) Phone (6) Redial/Call History

Book

(7) Hold

(16) Numeric
Keypad (8) Speaker Phone

(9) Speaker
Phone

Allnet ALL7950 User Manual 6

4.0 SUMMARY OF KEY FUNCTIONS

Keys Functions

(1) LCD Display Displays menu, time, clock, name, phone number, call
status

(2) OK/Right Confirm setting change, exit menu, dial, save changes

(3) Menu Access the phone menu

(4) Mute/Function Disable users microphone so that the person on the

other line can not hear anything, access the language
selection, access the time format

(5) Transfer Transfer the person you are currently having a

conversation to another line

(6) Redial/Call History Redial last dialed number, access redial menu

(7) Hold Place the person on the other line on hold, answer call
waiting

(8) Speaker Phone Enable user to use the phone without using the handset

(9) Speaker Phone Indicates that phone is currently in speaker phone mode
Indicator

(10) Down Cycle through the phone menu, adjust volume

(11) Up Cycle through the phone menu, adjust volume

(12) Cancel/Left Deny changes, cancel phone calls, ignore phone calls,
backspace

(13) Voice Message Check voice message

(14) 3-Way Conference Enable 3-way conference

(15) Phonebook Access the phonebook

(16) Numeric Keypad Input IP/phone number/alphabet characters

Allnet ALL7950 User Manual 7

 5.0 CONNECTING THE IP PHONE
Connect the IP Phone as the following diagram:

Wide Area Network / Internet

Cable/xDSL Modem

Router/HUB

Ethernet Cable
Ethernet Cable

Power Adapter

Allnet ALL7950 User Manual 8

6.0 IP PHONE SETUP
6.1 Menu Summary Press the MENU key

Display Name:
Allnet_45

Enable ADSL DIALUP: Disable

ENABLE/DISABLE

ADSL DIALUP: ADSL DIALUP:

ENABLE DISABLE

ADSL ID:
[email protected]

ADSL Password:
********

Enable DHCP: Disable

ENABLE/DISABLE

IP Address: IP Address:
AUTO 192.168.001.151

Subnet Mask: Subnet Mask:

AUTO 255.255.255.000

Router IP: Router IP:

AUTO 061.063.083.254

DNS Server IP: DNS Server IP:

AUTO 217.237.151.097

ENABLE/DISABLE select
SNTP Server IP: enable or disable
192.53.103.103
AUTO IP address given by
the router or ISP

Allnet ALL7950 User Manual 9

 SNTP Cycle:
01

Do Not Disturb:
ENABLE/DISABLE

CF Unconditional:
ENABLE/DISABLE

CF User Busy:
ENABLE/DISABLE

CF No Answer:
ENABLE/DISABLE

Anonymous Call:
ENABLE/DISABLE

Anony Call Rej:

ENABLE/DISABLE

Ringing Type: Ringing1/2/3/4 - select

Ringing1/2/3/4 ringing1, 2, 3 or 4

MAC Address:
00D0E90137DB

Version:
V: 02.09.21

Press the MENU key

UPDATE CHANGES?
<OK> OR <CANCEL>

Allnet ALL7950 User Manual 10

NOTE 1: If you made any modifications, you may quit setup at any time by pressing
MENU + OK to save and exit or MENU + CANCEL to quit without saving. The phone
will automatically exit from the menu screen if there are no inputs from the user.

NOTE 2: Use or to select ENABLE or DISABLE.

NOTE 3: Left arrow key can be used as Backspace key.

6.2 Display Name

MENU
Press

Display Name:
Enter the display name Allnet_45

6.3 ADSL Dialup

Some Internet Service Provider (mostly ADSL) uses PPPoE which requires that the
user enter an ID and a password to access the Internet. In this case, enable ADSL
DIALUP and enter the PPPoE ID and PPPoE password.

ENABLE ADSL Dialup

1
Press

Use to select ENABLE ADSL DIALUP:

ENABLE

2
Press

ADSL ID:
Enter the ADSL ID provider_ID

Allnet ALL7950 User Manual 11

3
Press

ADSL Password:
Enter ADSL password *******

DISABLE ADSL Dialup

Press

ADSL DIALUP:
Press to select DISABLE DISABLE

6.4 DHCP (Dynamic Host Configuration Protocol)

DHCP allows the network administrator to distribute IP addresses when a computer is

plugged into a different place in the network. If your ISP provides static IP address, you
must disable DHCP and enter the IP address provided.

ENABLE DHCP

1
Press

DHCP:
Use or to set DHCP to ENABLE ENABLE

2
Press

IP Address:
IP address automatically acquired 192.168.001.161

Allnet ALL7950 User Manual 12

 3
Press

Subnet Mask:
Subnet mask automatically acquired 255.255.255. 0

4
Press

Router IP:
Router IP automatically acquired 192.168.001.161

5
Press

DNS Server IP:

DNS Server IP automatically acquired 217.237.151.097

DISABLE DHCP

1
Press

DHCP:
Use or to set DHCP to DISABLE DISABLE

2
Press

IP Address:
Enter the IP address 192.168.001.161

Allnet ALL7950 User Manual 13

 3
Press

Subnet Mask:
Enter the subnet mask 255.255.255.000

Press

Router IP:
Enter the router IP address 192.168.001.001

5
Press

DNS Server IP:

Enter the DNS Server IP 217.237.151.097

6.5 SNTP Server IP

Simple Network Time Protocol (SNTP) is a protocol used to help match your system
clock with an accurate time source. If you do not know your SNTP Server IP, please
ignore this section.
SNTP Server IP address can be either URL or IP.

Press

SNTP Server IP:

Enter SNTP server IP or URL 216.133.140.78

Allnet ALL7950 User Manual 14

6.6 Do Not Disturb

This setting allows the user to reject all incoming phone calls.

Press

Do Not Disturb:
Use or to select ENABLE or DISABLE DISABLE

6.7 CF (call forward) Unconditional

Enable CF Unconditional to forward all the incoming calls to another number. Otherwise
set to disable. You will need to use a web-browser to input the forwarded phone
number. Refer to section 7.0 for more information on call forwarding.

Press

CF Unconditional:
Use or t to select ENABLE or DISABLE DISABLE

6.8 CF (call forward) User Busy

Forward all the incoming calls to another number when user is busy on the phone.

Press

CF User Busy:
Use or to select ENABLE or DISABLE DISABLE

6.9 CF (call forward) No Answer

Forward all incoming calls to another phone number after a certain number of rings.

Press

CF No Answer:
Use or to select ENABLE or DISABLE ENABLE

Allnet ALL7950 User Manual 15

6.10 Anonymous Call

Enables the caller (user) to hide the name and phone number from the receiver.

Press

Anonymous Call:
Use or to select ENABLE or DISABLE ENABLE

6.11 Anony Call Rej (Anonymous Call Rejection)

Reject any anonymous incoming calls.

Press

Anony Call Rej:

Use or to select ENABLE or DISABLE DISABLE

6.12 Ringing Type

Select the ring tone. There are four ring tones in total.

Press

NOTE: At this point, you may save the settings and exit. The nextRinging Type:explain
two sections
to obtain
how Use the MAC address
or andtofirmware
select the ring type
version.
Ringing4

MENU
Press to exit menu

When asked to save or cancel, press to SAVE

Allnet ALL7950 User Manual 16

6.13 MAC Address

This menu displays the MAC address. User cannot modify MAC address.

Press

MAC Address:
MAC address is displayed on the screen 000FC9017D4B

6.14 Version

Version menu displays the firmware version. You cannot modify the version number.

Press

Version:
Firmware version is displayed on screen V: 02.09.22

NOTE: You can also display the current IP-address of the ALL7950 IP-phone at any
time, if you press the Func.-key followed by the number 9.

Allnet ALL7950 User Manual 17

6.15 Language Selection

The VoIP Phone (model no. ALL7950) supports four languages:

English, German, Spanish and Italian language on the display and configuration-pages.

Language:
Press followed by English

Use or to select the preferred language

Press when done

6.16 Time Format

You may select the 12hr or 24hr time format.

Time Format:
Press followed by 24Hours

Use or to select the time format

Press when done

6.17 Volume Adjustment

6.17.1 Ringer Volume

While the handset is in place,

Press to increase the ringer volume and to decrease the

ringer volume.

Allnet ALL7950 User Manual 18

 6.17.2 Speaker Volume

While the handset is in place,

Press

Press to increase the speaker volume and to decrease the

speaker volume

6.17.3 Handset Volume

Pick up the handset and press to increase the volume or press

to decrease the volume

Allnet ALL7950 User Manual 19

7.0 USING THE CONFIGURATION MENU
The configuration menu can be accessed using a web browser. Some advanced
features such as CF Unconditional, CF User Busy and CF No Answer must be setup
from the web browser.

7.1 Accessing Configuration Menu

Open the web browser (ie. Internet

Explorer, Netscape)
Type in the IP Address of the
phone followed by :9999

IP address is provided by your Internet Service Provider (ISP). If your ISP supports
DHCP, you may obtain the IP address from you phone. Press MENU and scroll down to
IP address.

Enter User Name

and Password
(leave User Name
and Password
blank if you are
installing the
phone for the first
time).

Click OK

Allnet ALL7950 User Manual 20

7.2 Basic Settings

Username Configuration menu login name.

Password Configuration menu login password.

Timeserver IP Network Time Protocol (NTP) is a protocol used to

help match your system clock with an accurate time
source (eg atomic clock, time server). It is good
practice to have all your networked computers
synchronized with one server.

Time Zone Select your time zone. If there is daylight saving in

your area, click the check box.

TFTP Server Enable or disable TFTP server to allow transfer of

firmware from a computer to the IP phone.

FTP Client Enable or disable IP phone to download files from

FTP server and update the firmware automatically.

Remote Configuration Remote password to access the configuration menu

Password from VoIP software (You may download this
software from your suppliers website). Default
password is 1234.

Allnet ALL7950 User Manual 21

Language You can select English, German, Italian or Spanish
as display and configuration-language.

7.3 Network Settings DHCP

Select DHCP if you have cable internet or use DHCP in your private network.

DHCP Server Dynamic Host Configuration Protocol (DHCP) Server

address. This IP address information is obtained
automatically from your ISP or your private DHCP-
Server (i.e. DSL-router)

DNS Server DNS address provided by your ISP or router

7.4 Network Settings PPPoE

Choose PPPoE if your ISP uses PPPoE. Most DSL users use PPPoE.

PPPoE Username PPPoE ID/username provided by your ISP.

PPPoE Password PPPoE password.

DNS Server DNS address provided by your ISP.

Allnet ALL7950 User Manual 22

7.5 Network Settings Static IP

Choose Static IP network setting if all Wide Area Network IP data is provided to you by
your ISP or you want to use static addresses in your private network.

IP Address IP address assigned to you by your ISP.

Standard Gateway Router IP address.

Subnetmask Subnet mask address.

DNS Server DNS server address provided by your ISP.

NOTE: RESTART the system for new settings to take effect after you modify the
IP- address.

Allnet ALL7950 User Manual 23

7.6 SIP Settings SIP Phone Settings, Registrar and Proxy Server

The Session Initiation Protocol (SIP) is the most popular Voice over IP standard. It
enables two or more people to make phone calls, share multimedia and establish a
multimedia conference over the internet. Please have an administrator setup these
settings for you or obtain this information from your SIP service provider.

SIP Phone Portnumber SIP phone port number. If you operate multiple
phones behind a NAT-router, every phone needs
its own different port number.

SIP Server Domain SIP Registrar server domain name or IP address.

Name/IP Address

SIP Server Portnumber SIP Registrar server port number. Default is 5060.

Authentication Time Out The time that the phone waits to connect to the SIP
server after the user dialed a number. If still not
connected, the phone will disconnect and redial.

Outgoing Proxy Domain Outbound proxy domain name or IP address.

Name/IP Address

Outgoing Proxy Outbound proxy port number.

Portnumber

Allnet ALL7950 User Manual 24

7.7 SIP Settings Message Server

The LED beside the Speaker button of the ALL7950 IP Phone will light to indicate that
messages are waiting for you in the message server. Please have an administrator
setup these settings for you or obtain this information from your SIP service provider.

Note: The MWI (Message Waiting Indication) light will only work if configured
accordingly in the message server.

Message Server Domain Message server domain name or IP address.

Name/IP Adress

Message Account Particular account of this IP Phone to access the

mailbox on the message server. In many cases it
will be the SIP URI (userpart) of this phone.

Allnet ALL7950 User Manual 25

7.8 SIP Settings Others

This section is for network administrators.

Session Timer The time interval in which the phone periodically

refresh SIP sessions by sending repeated INVITE
requests. These INVITE requests allow the user
agent or proxies to determine the status of the SIP
session.

Media Port Real-time Transport Protocol port number. Provides

end-to-end transfer of data with real-time
characteristics, such as streaming audio and video.

Prack Prack ensures that media information is exchanged

and that network checks before connecting the call.
Select Enable for a more reliable connection.

Session Refresher Select None to disable SIP session timer support.

Select UAC to initiate SIP request to the SIP-server.

Select UAS to first receive a SIP request from the

SIP-server and then return a response.

Session Timer Method Select SIP request method. Default method is Invite
(correct type for most SIP-providers).

Signal UDP/TCP Select SIP signal transmission method. Default

method is UDP.

Allnet ALL7950 User Manual 26

7.9 SIP User Settings

You may have up to 4 accounts. i.e., the IP phone can receive calls for up to four
registered different phone numbers of one provider.

Standard SIP Account When you dial a number, the default account is
used to dial. User Name of default account is
displayed on the receivers IP phone.

Activate Account Enable or disable this account.

Displayed Name Displayed name on the IP phone of the called

party.

SIP Username Your SIP User name.

Authentication Name Your User-Name used to access the SIP server.

Authentication Password User password to access SIP server.

Register Status Displays whether the current phone is registered

or unregistered with the SIP server.

Allnet ALL7950 User Manual 27

7.10 STUN & UPnP Settings

STUN Simple Traversal of User Datagram Protocol through

Network Address Translators is a protocol that allows
applications to determine the types of NATs are in
between them and the internet. STUN also provides
the ability for applications to determine the public IP
addresses allocated to them by the NAT.

STUN Enter STUN domain name or IP address if STUN is

Server :Portnumber enabled.

User Defined Enable or disable the manual configuration of

External/Port external WAN IP/Port settings (such as your Routers
WAN port) that link to the Internet for NAT traversal.

External IP Address Enter the public IP address of the network device

(such as a DSL-Router) that links to the Internet for
NAT traversal if User Defined External IP/Port is set
to enabled.

External SIP Port Enter the outbound SIP port number (SIP registration
and signaling) of the network device (such as Router)
that links to the Internet for NAT traversal if User
Defined External IP/Port is set to enabled.

Allnet ALL7950 User Manual 28

External Media Port Enter the Real-time Transport Protocol port number
(audio packets from phone) of network device (such
as Router) that links to the Internet for NAT traversal
if User Defined External IP/Port is set to enabled.

UPnP Enable or disable universal plug and play. Some NAT

supports UPnP so STUN is not required and must be
disabled. Do not use STUN and UpnP at the same
time!

Always send keepalive Enable or disable the function of always sending

packet keepalive packets to the registration SIP-server
periodically.

KeepAlive Time The time interval between two consecutive keepalive

packets can be adjusted between 5 and 30 seconds.

Allnet ALL7950 User Manual 29

7.11 Audio Settings and QoS

Codec Voice Compression Algorithm priority settings. Select

from the most used codec to the least used codec.
For most providers G.729A is a good choice.

RTP Packet Size Real-Time Transfer Protocol (RTP) packet length.

VAD VAD detects voice activity and adjusts the signal to a

target power level. It ensures that background noise
or echo does not get amplified to the target power
level.

DTMF Transmission Select the DTMF tone-transmission method for IP

phone.

Audio Priority TOS Sets the type of service (Layer 3) for this Internet
datagram.

VLAN Enable or disable virtual LAN. Use with CAUTION !

VLAN Priority Set the virtual LAN Priority.

VLAN ID Virtual LAN ID.

Allnet ALL7950 User Manual 30

7.12 Phone Settings Phone Settings

Recall, you can only enable or disable call forwarding from the IP phone MENU key.
With the web-browser, you can enter the forwarded phone numbers in the Phone
Setting menu.

Tone Setting Select the tone for particular country. This setting will
change the sound of tones like the dial-tone, busy-
tone etc. according to your countries standards.

Ringer Type Select the type of ring (1 to 4).

Hold Tone Select melody or tone when HOLD key is pressed.

Do Not Disturb Reject all incoming calls.

Call Waiting Enable or disable call waiting.

Anonymous Call If DISABLE is selected, full URI and name are sent
to the receivers phone when the user makes a
phone call. The URI and name of the caller are
displayed on the receivers phone.

When Full URI is selected, only user name is

displayed on the receivers phone when the user
makes a phone call.

When Display Name is selected, only name is

Allnet ALL7950 User Manual 31

 displayed on the receivers phone when the user
makes a phone call.

Anonymous Call Reject Select Enable to reject anonymous calls.

Call Forward Click No Answer to enable call forward to another

number when no one answers the phone after 180s
(default). The timer can be changed from 0-600s.
Refer to section 7.14 to change the timer.

Click Busy to enable call forward to another number

when user is busy on the phone.

Click Unconditional to transfer all incoming calls to

another number.

Enter the call forward number on the text box.

7.13 Phone Settings Timer

NTP Recycle Timer NTP recycle time. Sets time-interval how often the
Time-server ist called for the current time.

Inter Digit Timer The time interval that the IP phone waits to detect
the end of DTMF digits. No more digits are accepted
after this period and the phone begins to dial.

Originating Not Accept The time interval that the callers phone waits to
Timer establish a call. If the receiver fails to answer the
phone during this time interval, the callers phone will
automatically disconnect.

Allnet ALL7950 User Manual 32

Incoming No Answer The time interval that the receivers phone will ring. If
Timer the receiver fails to answer the phone during this
time interval, the phone will automatically disconnect.

Hold Recall Timer The time interval that the caller is put on hold before
the phone automatically disconnect.

Auto Speaker Off Timer The time interval that the speaker phone is on before
turning off automatically (due to inactivity).

7.14 System Log

System Log keeps a record of all the phone activities. This log is used by our engineers
to troubleshoot hardware problems.

Allnet ALL7950 User Manual 33

7.15 Phone Book

Phonebook menu allows the user to add, modify and delete phone numbers. To add,
type in the name and number then click NEW to add. To modify/delete, select the name
from the list and click modify/delete.

Name Entry-Name that you would like to add.

Phone Number Phone number or URI that corresponds to the name.

7.16 One Touch Dial

Speed dial numbers can be accessed from the IP phone. Refer to section 8.2 for speed
dial info.

Allnet ALL7950 User Manual 34

Number 0x Speed dial phone number. 0x is the speed dial
number.

7.17 Factory Settings

Click on Factory Settings and the above screen will be displayed.

Factory Settings Restores all the phone-settings back to factory

default settings. You will also loose all entries in the
phonebook !

7.18 Firmware Update

FTP server, login ID, login password and firmware filename may be preset when you
purchase the phone. These are required to download and update the firmware from an
FTP-Server.

FTP Server FTP Server address.

Login ID Login ID provided by your supplier.

Login Password Login password provided by your supplier.

Firmware File Updated firmware-filename. Do not change the file

name unless specified by your supplier.

Allnet ALL7950 User Manual 35

7.19 Reboot System

Click Restart to update all the modifications and reboot the system.

7.20 Support

Click on Support if you have problems to configure this phone.

Allnet ALL7950 User Manual 36

8.0 OPERATING THE PHONE
8.1 Dialing

8.1.1 IP Address

1. Lift handset or press SPEAKER button

2. Dial IP address.

For example: dialing 192.168.0.1

If you want to use a different IP signaling portnumber than 5060 (default),

you can append the IP-portnumber by pressing the Mute/Func. Key

followed by the portnumber.

3. Press OK or wait until the timer expires to dial.

8.1.2 SIP Number

Note: You have to register with SIP server to use SIP number.

1. Lift handset or press SPEAKER button

2. Dial SIP number.

For example: dialing 1866

Allnet ALL7950 User Manual 37

 3. Press OK or wait until the timer expires.

8.1.3 SIP Number From Distinctive SIP Account

Note: You have to register with SIP server to use SIP number.

1. Lift handset or press SPEAKER button

2. Dial SIP number 1866 from 2nd SIP account.

For example: dialing # # 2 1866

3. Press OK or wait until the timer expires.

Allnet ALL7950 User Manual 38

8.2 Speed Dialing

1. Lift handset or press SPEAKER button

2. Dial Speed Dial number.

For example: dialing speed dial number 08

8.3 Answering a Phone Call

Note: The CANCEL key may be used to reject a call.

When phone rings:

1. Lift handset or press SPEAKER button

to begin conversation.

8.4 Switching to Another Line

While having a conversation:

1. Press Hold to switch to another line.

8.5 Mute

Note: While mute is activated, sound from the caller can be heard from your speaker
but your sound cant be heard by the caller.

Allnet ALL7950 User Manual 39

While having a conversation:

1. Press Mute . You may press Mute key again to resume

conversation.

8.6 Call Transfer

While having a conversation:

1. Press Hold to put the person on the other line on hold.

2. Dial the IP address or the extension number where you like the call to be
transferred.

3. Press Transfer to transfer the call.

8.7 Redial

Note: To return to idle mode, press CANCEL key

8.7.1 Last Dialed Number

1. Lift handset or press SPEAKER button

2. Press Redial to dial the last dialed number.

Allnet ALL7950 User Manual 40

 8.7.2 Through Call History

1. Press Redial . Do not lift the handset when you press Redial.

2. Press Redial again to cycle through the dialed, missed and

received calls.

3. Press DOWN key to scroll down the dialed, missed or received

lists until the number is displayed on the screen.

4. Pickup the handset or press OK

8.8 On Hold
Note: To transfer a call while on hold, press the TRANS key. Dial the extension/phone
number and press the TRANS key again to transfer the call.

While having a conversation:

1. Press HOLD (Press HOLD again to resume conversation)

8.9 Call Forward

Please refer to IP Phone Setup and Web Browser Configuration section to setup
call forwarding.

Allnet ALL7950 User Manual 41

8.10 Three Way Conference

1. Pick up the handset and call Person A.

You Person A

2. After Person A pick up the phone, press Hold key to place

Person A on hold.

3. Dial the extension or phone number of Person B and wait until Person B
picks up the phone.

4. Press Conference key to begin 3-way conference.

You Person A

Person B

Allnet ALL7950 User Manual 42

9.0 USING THE PHONEBOOK

9.1 Dialing from the Phonebook

1. Press the PHONE BOOK key to access the phone book.

2. Press to scroll down the list until the name is displayed on the
screen.

3. Press OK to dial.

9.2 Storing a Number

1. Press and hold the PHONE BOOK key until Name: is

displayed on the screen.

2. Enter a name then press OK

3. Enter the number that corresponds to the name and press OK

4. Press OK again to save the phonebook.

5. Repeat Step 1 to 4 to store another phone number.

Allnet ALL7950 User Manual 43

9.3 Editing a Number

1. Press the PHONE BOOK key to access the phonebook.

2. Press until the name is displayed on the screen.

3. Press the PHONE BOOK key again.

4. Select Edit and press OK to edit.

5. Enter a new name and press OK

6. Enter the new phone number and press OK

7. Press OK to save and override the previous name and phone

number.

9.4 Deleting a Number

1. Press the PHONE BOOK key to access the phonebook.

2. Press until the name you want to delete is selected.

3. Press the PHONE BOOK key again.

4. Select Delete and press OK to delete.

5. Press OK again to save the new list on the phonebook.

Allnet ALL7950 User Manual 44

10.0 Troubleshooting
The following troubleshooting information can be used to help solve most common
problems.

QUESTION RECOMMENDED ACTION

There is no DIAL tone 1. Check if there are any loose connections.

Nothing is displayed on the 1. Check if power cord is connected properly.

LCD screen
2. Check if there is 120V AC coming from the power
outlet.

How do I update the 1. ATC IP Phone automatically updates firmware when it

Firmware?
powers up (while connected to the internet).

Why cant I dial my friends 1. Check Registrar Server Domain Name/IP address
SIP number?
and Outbound Proxy Domain Name/IP Address (under
SIP Settings in Configuration Menu). Make sure you
have the right Name or IP Address.
2. Check the LCD display on your phone to see if there
is a name or number displayed on the screen. If the
name or number is not displayed, use a web browser
and access the configuration menu. Make sure that the
Registrar Server Domain Name/IP Address is correct.
3. Check the register status under SIP Account Settings
in the configuration menu (from web browser). If your
status is unregistered, it means you do not have a SIP
account. Contact your SIP service provider to get an
account.

Why isnt my firmware 1. Your IP phone automatically detects for new firmware
updating?
when you unplug the power. If new version is available

Allnet ALL7950 User Manual 45

 the phone will automatically update the firmware.
2. Check if FTP address is correct.
3. Check with your supplier if firmware filename is
correct.

I accidentally set DSL to 1. Unplug the power cord from the IP phone. Wait 2
enable and now the phone
seconds and plug the power cord back in the IP phone.
does not boot up
Press and hold MENU key. The system should bypass
boot up and go straight into phone setup menu. Modify
the phone setting and make sure you save it before you
exit.

Why do I get Cant 1. Make sure you exit setting mode (phonebook, menu,
Upgrade Now screen
speed dial) before you click [Submit] in the
when I click [Submit] in the
configuration menu? configuration menu.

Room for notes:

Allnet ALL7950 User Manual 46

11.0 Specification ALL7950 SIP Phone
Mechanical:

LCD-Display 2x16 Characters

Keys 25
Indicator LEDs 2 (Off hook & Speaker)
Built in Hands free facility

Weight 630g (without Power Supply)

Dimensions w=21cm l=23cm h=8 cm , measured with handset onhook
Network conn.: 2 (internal Switch for PC-connection)

Power supply:

Ext. Power Supply Mains Voltage 100-240V AC, 50/60Hz

Output Voltage 5V DC 1,4A

Certificates

FCC part 15, Class B

tested to comply with FCC standards for home and office use
VCCI Class B

Class B
EN60950

Supported languages for LCD-display and browser-configuration

English
German
Spanish
Italian

Environmental Spec.

Operation 0 to +40C
Storage -20 to +60C
Rel. humidity 20 to 80%, non condensing

SIP-Compatibility

IETF SIP v2 according to RFC3261

Allnet ALL7950 User Manual 47

Codec-Support

G.711Law
G.711Alaw
G.723.1
G.729a/b

Dialing support

IP address direct dial without SIP-registration

Number-dial with SIP server
URI or Number dial with phonebook or short-dial function

Quality of Service (QoS) support

TOS (Type of Service) for Layer 3

IEEE 802.1q for Layer 2

NAT-traversal Support

UPnP
STUN
Keep Alive Packets
Manual configuration of WAN-Parameters

Firmware Upgrade

TFTP (internal TFTP-server to upload firmware)

FTP (internal FTP-client to download firmware)

Configuration

Configuration with LCD-Display and Keypad

Web-Browser

WAN-Connection

Static IP Address
DHCP
PPPoE

Allnet ALL7950 User Manual 48

12.0 CE Approval

Allnet ALL7950 User Manual 49