RAnschtz
Gyro Compass System
Standard 22
R Anschtz
Gyro Compass System Standard 22
Gyro compass
Standard 22
Standard 22 is the most popular Gyro Compass in the market
due to its performance and reliability.
Standard 22 uses sophisticated Gyro Compass technology based on
100 years of experience. Operational safety was dramatically increased
due to a patented data transmission technology that completely re-
places the use of slip rings.
The new Standard 22 combines proven technology and long mainte-
nance periods with most advanced features. A secure investment in
your ship for a long time.
Features Products
Besides the main function as a heading sensor, the Standard 22 Gyro The Standard 22 Gyro Compass is a modular system that was designed
Compass System offers many features that provide additional value to meet the individual requirements of our customers. The system
and make the day-to-day work easier. The Gyro Compass Standard 22 consists of the gyro compass, an operator unit and a distribution unit.
comes with automatic speed / latitude error correction. Values for Up to three gyro compasses can be connected to a system. A magnetic
speed and latitude are provided by sensors or entered manually via the compass, the Standard 21 GPS Compass and an external rate-of-turn
operator unit. gyro can be integrated as additional sensors.
When using Quick Settling mode, the heading information is pro-
vided within just one hour after switching on. Raytheon Anschtz also offers a fully redundant Gyro Compass System
The integrated course monitor compares the heading information that complies to DNV NAUT-AW and NAUT-OC. This system consists
from up to four different compasses. An alarm is given, if an user- of 2 gyro compasses, 2 operator units, 2 distribution units and one
dened threshold is exceeded. change-over unit. No single failure in this system will cause loss of
In case of a gyro compass system alarm, the system switches auto- heading information to the connected equipment.
matically to another compass as dened by the user. The central alarm
reset function allows a remote acknowledgment of audible alarms
meaning that an audible alarm of the Standard 22 can be muted direct-
ly at the operator unit or remotely via a central alarm panel.
Approved Technology
The Gyro Compass Standard 22 has been type approved in accordance
to the International Maritime Organisation (IMO) standards. In ad-
dition the Standard 22 System has been approved to the High-Speed
Craft Code and as a rate-of-turn sensor with an accuracy according to
IMO.
More than 200 Service Stations all around the world
Gyro 2 Gyro 1 STD 21 GPS
Processor unit
Redundant CAN-bus
Distribution unit Operator units
Benets
High accuracy of 0.1 degrees
Operator unit Quick Settling reduces the settling time to 1 hour
Manual and automatic speed / latitude error correction
Compass monitor and selector with automatic
switch-over (configurable)
Central alarm reset
Integration of magnetic compass, Standard 21 GPS Compass and
external rate-of-turn gyro
Short installation time and long maintenance periods
Steering repeater
Rate-of-turn gyro with an accuracy according to IMO
compass
IMO approved for standard and High-Speed Crafts
Modular product range to meet individual requirements from a
single gyro compass to the fully redundant gyro compass system
Integrates seamlessly into your system environment due to a
multitude of interfaces and formats
Distribution unit Accessories
Self aligning steering repeater with source indication
Self aligning bearing repeater with source indication
Digital repeater
Multi display
Different casings for IP44 and IP 56
Course and rudder angle printer
Course transducers for retrofit solutions
R Anschtz
Gyro compass STD 22
Technical Data
Accuracy
Settle point error: 0.1x secLat., RMS
Static error: 0.1x secLat., RMS
Dynamic error: 0.4x secLat., RMS
(periodic roll and pitch+horizontal acceleration)
secLat.=1/cosLatitude
Supply voltage
24 V DC (18 36 V DC)
Power consumption
60 W to 120 W (start-up) sensor unit
36 W distribution unit
5 W operator unit
7 W per analogue repeater
General data Operator unit
Permissible ambient temperature
Operation: 10 C to +55 C
Storage: 25 C to +70 C
without supporting liquid
Settling time: 1 h ( < 3) with
Quick settling
Rate of follow-up: admissible rate-of-turn of
the ship is unlimited
Permissible roll
and pitch angle: 45
Steering repeater compass
Signal outputs
12x RS 422 individually configurable
as course bus or NMEA 0183
3x step, 6 steps/degree, 35 V DC
common + or , total power < 15 W
1x RS 232C for course printer
Rate-of-Turn 10 V DC
RoT 30, 100, 300
Alarms
Built-in alarms: power failure, gyro failure
system failure
Alarm outputs: potential-free relay con-
tacts
Central alarm reset
In accordance with Distribution unit
IMO A.424(XI), A694(17), A.526(13), A.821(19)
EN/IEC 60945, EN/ISO 8728, EN/IEC 61162
Weight
Master compass: 17.5 kg
Distribution unit: 5 kg
Operator unit: 1.5 kg
Type of enclosure acc. to IEC/EN 60529
Gyro compass: IP 23
Operator unit: IP 23 / IP 56 Front sided
Distribution unit: IP 22
Subject to change due to technical Raytheon Anschtz GmbH
developments without notice. D-24100 Kiel, Germany
Tel +49(0)4 31-30 19-0
Fax +49(0)4 31-30 19-291
All rights reserved Printed in Germany Email
[email protected]RAN 801.90 e / L&S 0609
www.raytheon-anschuetz.com
