Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.

com/loft-feature-exercise-solidworks/

In this tutorial, you will learn how to use the loft feature by following a step by step guide on
how to create this simple 3D geometry in SolidWorks, you will also learn how to use the sweep
feature and a ton of other useful commands. As always there is a free CAD exercise at the end of
this post, let me know if you need any help to figure it out!

1 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

Time required: 60 minutes

Already know what to do and just want to do the loft feature exercise? Click here!

1. Open SolidWorks.

2. Create a new part file.

Click new

Double click part in the new tab to create a new part document.

3. Click insert on main toolbar.

4. Go via insert -> reference geometry and select plane

2 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

SolidWorks reference geometries are a set of geometries which serve as an aid when you
need to create sketches or features away from either the base datum planes or any existing
part surfaces.
There are several reference geometries: plane, axis, coordinate systems and point.
Plane allows the user to create additional planes to sketch on other than the original planes or
feature surfaces.

5. In the property manager, click first reference, then select front plane from the part design
tree.

6. Select offset distance and enter 30mm as the distance between the parallel pages.

7. Check flip.

8. Enter 5 as the number of planes.

3 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

9. Press ok.

10. Select plane 1 and click sketch

To have a normal view on the selected plane, choose normal to from the click options.

You can also press space on your keyboard, to see the orientation panel. Then choose
to.

11. On the sketch tab, click on the circle tool.

12. Using the circle tool, click on the origin and draw a circle.

4 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

13. Exit the plane 1 sketch.

14. Select plane 2 and click sketch.

15. Repeat step 11 to 13 for this plane. Then draw a circle with the same size as circle 1.

16. Select plane 3, and click sketch.

17. Repeat step 11 to 13 for this plane and draw a circle slightly larger than previous circles (pick
a diameter that you feel comfortable with).

5 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

18. Select plane 4, and click sketch.

19. Repeat step 11 to 13 for this plane too, and then draw a circle slightly larger than circle 3.

20. Select plane 5, and click sketch.

21. Repeat the steps 11-13 for this plane, and draw a circle with the same size as circle 3

6 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

22. Select insert-> reference geometry-> plane.

23. Adjust the following settings (check the image below) in your property manager, and insert
plane 6.

24. Select plane 6, and click sketch.

25. Repeat step 11 to 13 for this plane, and draw a small circle according to the example.

7 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

26. On the feature tab, select lofted boss/base

The loft feature is a SolidWorks 3D feature which creates a shape by making transitions
between multiple profiles and by using a guide curve (also called a guide rail).

27. In the property manager, click profiles . Select sketch 1 to 6 as the loft feature

profiles from the design tree.

8 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

28. Click thin feature to create a thin wall shape, then enter 10mm as the wall thickness

29. Press ok.

30. Select plane 4, and click sketch.

9 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

31. On the sketch tab, click on the centerline tool.

32. Using the centerline tool, draw a vertical line which passes through the origin.

10 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

33. Click on the spline tool.

34. Using the spline tool, click on origin and start to draw a spline from the surface to the
centerline according to the example.

35. Select the spline, and click offset entities on the sketch tab.

11 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

Offset entities is a sketching tool which enables you to offset entities edges or surfaces within
a desired distance.

36. Enter 10mm in the dimension tab.

37. Press ok.

38. Close the drawn entities lower end by using the line tool, according to the example.

39. Close the drawn entities upper end by using the line tool.

12 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

40. Now that we have a fully closed sketch you should exit the sketch.

13 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

41. On the features tab, click revolved boss/base.

42. In the property manager tab, select the centerline as the axis.

43. Click selected contours. Select the closed spline contour from the last sketch on the screen.

14 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

44. Press ok.

15 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

45. Select plane 4 and click sketch.

46. On the sketch tab, click spline

47. Using the spline tool, draw a spline starting from the handle midpoint.

16 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

48. Exit the sketch.

49. Select insert-> reference geometry-> plane.

50. Adjust the following settings in the property manager by choosing the top plane and handle
midpoint.

17 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

51. Insert plane number 7.

52. Select plane 7, and click sketch.

53. Click the circle tool.

54. Using the circle tool, draw a small circle at the handles midpoint.

55. Exit the sketch.

18 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

56. On the features tab, click swept boss/base.

The sweep feature is a SolidWorks 3D feature which creates a shape by moving a 2D sketch
profile along a 2D or 3D sketch path.

57. On the property manager select the circle sketch as profile , and the spline sketch as

the path

19 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

58. Click ok.

59. Click file.

60. Click save.

20 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

Practice the loft and sweep feature by modeling this example.

You can use the following reference planes as help.

21 of 22 10/17/2017, 2:33 PM
Using The Loft Feature In SolidWorks - Exercise #4 in SolidWorks ... https://cadmode.com/loft-feature-exercise-solidworks/

https://www.cadmode.com

Founder of CAD Mode and a full-time CAD engineer.

22 of 22 10/17/2017, 2:33 PM