University

Alcatel 7302 ISAM

Alcatel-Lucent University Antwerp 1

7302 ISAM Interfaces

7302 ISAM
DSL Access
FE/GE Uplinks

ISAM
fiber Access CO Ethernet
Switch/Router

Subtending Links

7302 User Interfaces 7302 network Interfaces

ADSL/ADSL2/RE-ADSL2/ADSL2+, annex.M Uplinks, subscribers or
VDSL subtending
SHDSL FE/GE Optical/Electrical
Direct Ethernet over fiber

2
 University

General Topology

Alcatel-Lucent University Antwerp 3

Subtending vs. Expansion topologies (1/2)

CO CO or Cabinet Cabinet/MDU
7342

7302

subtending
link
7330 REM

7330
host

7356 REM-FD

7330 expansion link

Ethernet
host
Switch

7330 RA
7357 SEM-FD

4
Subtending vs. Expansion topologies (2/2)

subtending
connecting multiple ISAM systems (7302 CO or 7330 host)
via Ethernet subtending links
standalone nodes: each node provides the Ethernet switch and aggregation
function and is managed separately

expansion
connecting ISAM host shelf (7330 only) with remote LTs,
via expansion links (optical)
switch and aggregation function in host shelf only
one system: host shelves are managed together as a single system

5
 Terminology and interfaces (1/2)

No expansion link 7302 ISAM

in the 7302 ISAM

NT Subtending
GE/FE
optical/electrical
Contr
function Control links
FE - electrical
User link
network link GE/FE
GE/FE optical/electrical
optical/electrical
Aggr
Eth Function

ASAM links LT
GE - electrical
Physical user links
ADSL/ADSL2/READSL2
ADSL2+
VDSL2 - EFM
SHDSL EFM or ATM
Optical Ethernet

6
Terminology and interfaces (2/2)
Physical user links
xDSL
REM

LT
expansion links
GE - optical

Physical user links

7330 ISAM ADSL/ADSL2/READSL2
FTTN HOST ADSL2+
GENC VDSL2 - EFM
network link NCNC SHDSL EFM or ATM
GE opt./elect. Optical Ethernet
FE electrical.
Contr
function LT

ASAM links
Eth GE - electrical
Aggr
Function User link
GE/FE
optical/electrical
NT
Subtending
GE/FE
optical/electrical

7
 University

Equipment Practice

Alcatel-Lucent University Antwerp 8

Equipment practice

eXtreme Density - XD
ISAM 7302 16 slot ETSI
dedicated shelf for line boards
dedicated shelf for splitters
ISAM 7330 FTTN 4 slot ETSI
line and splitter boards are in same shelf
Remote Expansion Module
1 line board and 1 splitter board in a separate enclosure behaving as a remote
LT connecting to an 7330 FTTN host shelf
Flexible Density FD
universal slot concept allows any mix of xDSL LTs, splitters, fiber LTs,
voice cards in the same shelf
NT-B slot + NT I/O slot can be used as LT slot
ISAM 7302 16/18 slot ETSI
ISAM 7330 FTTN 8/10 slot ETSI
Remote expansion Module (FTTB 7356)
1 line board ,1 splitter board and/or 1 POTS board in a separate enclosure
behaving as remote LTs connecting to an 7330 FTTN host shelf.
9
 University

Equipment Practice - XD

Extreme Density

Alcatel-Lucent University Antwerp 10

 General architecture 7302 ISAM-XD
ASAM-shelf Power
4 External
XD equipment practice Ethernet
links NT I/O
16 LT boards
802.3
port

48 lines/LT
NT Control/Mgt function
Each LT contains an IWF Clock
Control link
separate splitter shelf 3/4 External
Ethernet 1..4 (FE)
Aggregation
Aggregation (service hub) links
802.3
GE/FE
1..3/4 function
port
and control- & management GE/FE 1 16 GE

function integrated on NT
1GE connectivity between ASAM link

NT and LT via backpanel ACU LT 1 LT 16

SMAS card LT module LT module
System MAC address
SMAS
storage
ACU

SMAS
48 lines

11
XD shelf types

ISAM 7302 - XD
XD-LT ALTS-T
ETSI shelf for 16 line boards (48 lines)
XD-SP ASPS-A
ETSI splitter shelf with backplane for 16 splitter boards (48 lines)
XD-SP ASPS-C
16 slot ETSI splitter shelf without backplane for 16 splitter boards (48 lines)

ISAM 7330 FTTN - XD

XD-ARAM-D
mini-RAM shelf for 4 line boards (LT 48 lines)

REM-XD
EREM-A
1XD-LT 24 ports VDSL and 1 XD-PS
can be connected to 7330 FTTN XD or FD

12
XD equipment practice

Single-shelf ASAM equipment practice

TRU
XD-LT ETSI splitterless shelf
ALTS-T
Mounted in ISAM XD RACK (with TRU)
LEDs SUB 1
power:
incoming from office battery
outgoing to shelves
Different rack configurations
splitterless deployment
Max 2 shelves per rack SUB 2
2 ISAM systems per rack
Deployment with splitters integrated in rack
1 shelf per rack
1 ISAM system per rack

splitterless deployment

13
XD rack configurations

TRU TRU TRU

splitterless splitter
splitterless
shelf 1 shelf 1 shelf

dust filter

splitterless splitterless
shelf 2 shelf

dust filter dust filter

splitterless deployment splitterless deployment combo deployment

1 ISAM systems in 1 rack 2 ISAM systems in 1 rack splitters integrated
in rack

14
ALTS-T Line terminating shelf

ISAM NT I/O
Back panel
PWR

LINE(1..24)
connector
area LINE(25..48)

LT board
ACU

NT
ACUNT

LT

LT
LT
LT
LT
LT
LT
LT
LT
LT
LT
LT
LT
LT

LT
LT

line board
XDSL x 24
area
XDSL x 24
SMAS

Fan unit fan area

FAN
dust filter
Dust filter

15
 Other system components

top rack unit

ATRU-Q

Up to 2 XD
XDLTLTshelves
shelves
per rack
power provisioning
fuses for boards/fans

Fan units
AFAN-H
with or without dust filter

air flow
splitter shelf can be integrated
in rack or separate (as shown)

16
ECNT Network termination board XD (1/2)

service hub
24 Gbps line rate capacity
16 port reserved for line cards &
expansions
1 (0) port to the control & mgt function
7 (8) ports remaining for Ethernet user
links, subtending links and network links
contains FLASH, RAM and ROM
memory
interfacing with management and
control interfaces via backpanel
traffic management on NT

ECNT-A
ECNT-C
17
ECNT network termination board XD (2/2)

ECNT-A: 3 Ethernet interfaces

2 variants: 100 Mb or 1Gb to each LT

port 0: optical
or electrical
LEDs RJ45 auto-sensing 10/100/1000Base-T
On board media conversion to GE optical
Electrical

SFP optical modules required

itfs

Flash memory is 256 M

ECNT-C: 4 Ethernet interfaces
3 x 1Gbps SFP port

port 1,2,3 optical

Optical itfs

1 x 10/100/1000Mbps port electrical or

1Gbps optical
Flash memory is 512 M
ECNT is used in:
7302 ISAM XD
7330 ISAM FTTN XD

18
NT I/O Network termination I/O board

provides 4 additional (external) Ethernet

interfaces
ECNC-A
RJ45 auto-sensing 10/100/1000Mbps
Or optical interfaces (1G only)
ECNC-B
FE optical interfaces

SFP optical modules required

RJ45 for test access (connection to TAU)

19
EBLT MultiDSL line termination board

multi-ADSL line card

48 ports per card
ADSL/ADSL2/READSL2/ADSL2+ line termination
POTS and ISDN line cards
GE interface towards NT
ATM cell <-> Ethernet packet conversion
Inter Working Function (IWF)
L2 and L3 cards
difference in supported FW Models, QoS,...

EBLT-C-E (POTS, L3)

EBLT-D-F (ISDN, L3)
EBLT-J (POTS, L2)

20
EVLT VDSL line termination board

VDSL line card

24 ports per card
POTS and ISDN line cards
GE interface towards NT

EVLT-C (ETSI/POTS)
EVLT-D (ETSI/ISDN)

21
SMLT SHDSL line termination board - XD

SHDSL line card

symmetric service:
bit rate from 192 kbps to 5696 kbps
in steps of 64 kbps
24 ports per card
EFM or ATM/IMA
GE interface towards NT

SMLT-J
SMLT-K

22
ACU Alarm Control Unit in 7302 ISAM XD

inserted in the leftmost slot of the splitterless shelf

(ALTS-T)
five LEDs to indicate different levels of fault conditions
ACO/lamp test push button switch
craft interface
9-pin D-connector
Ethernet connection
RJ-45 for out-band mgmt
cannot be used
one ACU/ISAM system

AACU-C

23
 University

Equipment Practice - FD

Flexible Density

Alcatel-Lucent University Antwerp 24

ISAM FD shelf Flexible Density Equipment Practice

FD slots are universal: can hold LTs as well as splitters

Higher densities can be obtained with FD shelves
One rack may contain 3 FD shelves compared to only 2 XD shelves
Various FD splitters will be available
multiDSL and VDSL2

fiber (p2p Eth) Multi-ADSL

POTS-only and universal POTS/ISDN

VDSL2
POTS
Single shelf for all
deployments

splitters
DSL

ISDN
voice
fiber

Multiple flavors of line cards available

Multiple density variants (28p, 48p)

25
 General architecture 7302 ISAM-FD

7302 FD-shelf
new equipment practice NEP 6 External
Ethernet NTIO 802.3
NFXS-A links port

capacity = 16 + 2 line slots

NT
NT-B/NTIO slots can be used as line slot
Control/Mgt
universal slot concept functions ACU Clock

shelf can accomodate any mix of Control link

2 External
xDSL LTs, splitters, fiber LTs, Ethernet
1..6 GE
Aggregation
voice cards links 802.3 function (SHUB)
2 GE
aggregation (service hub) and port 1 16/18 GE

control- & management function

integrated on NT ASAM link

1GE connectivity between LT16 18

NT and LT via backpanel or
Backplane ready to support evolution SP16 18
to higher densities or
mixed
ACU & clock function integrated on SMAS
NT board
SMAS functionality integrated on
Power
backpanel
26
Shelf types FD equipment practice

ISAM 7302 - FD
FD -NFXS-A
ETSI shelf for 16/18 boards (x lines)
universal slot concept allows any mix of xDSL LTs, splitters, fiber LTs,
voice cards
ISAM 7330 FTTN - FD
FD-NFXS-B
Mini-RAM ETSI shelf for 8/10 boards (x lines)
universal slot concept allows any mix of xDSL LTs, splitters, fiber LTs,
voice cards
7356 FTTB REM - FD
FD-NFXR-A
can be connected to 7330 FTTN XD or FD.

27
7302 ISAMFD shelf: NFXS-A
2 x NT
LT/splitter slots + NTIO LT/splitter slots
No connector area: direct
front access cabling
2 NT slots + 1 NTIO slot
16 LT/splitter slots
Capacity = 16 + 2 line slots
NT-B/NTIO slots can be used as
line slot 600

Max 864 lines/shelf

FAN

500 W x 600 H x 280 D

28
7302 ISAMFD shelf: NFXS-A

Back panel

NTIO/LT
NTB/LT
LT
LT
LT
LT
LT
LT
LT
LT

LT
LT

LT
LT
LT
LT
LT
LT
Card cage DSL
NTA

area
LT board

fiber conduct fiber channel

Fan area
Fan unit
Dust filter fiber conduct
Power &
PWR
connector FAN
area dust filter

29
7302 ISAM-FD shelf configurations LT shelves

XDSL XDSL
XDSL cable management area XDSL cable management area

48p-LT

48p-LT
NT IO
NT

NT

48p-LT

48p-LT
NT IO
NT
NT
BITS TAU BITS
BITS TAU BITS

ADSL 1- 48
Craft Craft
Craft Craft

ADSL 1-48
Mgt SFP3 Mgt
Mgt SFP3 Mgt

SFP4
SFP4

SFP5
SFP5

SFP6 SFP6
SFP1 SFP1 SFP1 SFP1
SFP7 SFP7

SFP2 SFP2 SFP2 SFP2

SFP8 SFP8

fibermanagement
fiber conduct area fiberfiber
management
conduct area
Fan unit Fan unit
Fan unit Fan unit
PWR PWR
BAT filers
filters connector PWR BAT
PWRfilers
filters connector
Inlet area Inlet area
BPA Block
BPA Block
Lamps
LEDS CBs Lamps
LEDS CBs

FD CO 16 slot LT shelf FD CO 18 slot LT shelf

with NT redundancy no NTIO / no NT redundancy
(e.g. HSI only application)

30
 7302 ISAM FD shelf configurations LT/splitter shelf

POTS
LINE

48p-LT

48p-LT
NT IO
NT

NT
BITS TAU BITS

Craft Craft

ADSL 1-48
Mgt SFP3 Mgt

SFP4

XDSL
SFP5

SFP6

SFP1 SFP1
SFP7

SFP2 SFP2
SFP8

LT SP LT SP
Fiber management area
Fan Unit
Fan unit
PWR BAT filers
PWR filters Connector
Inlet area
BPA Block
Lamps
LEDS CBs

FD CO 16 slot shelf FD CO 18 slot shelf

with NT redundancy without NT redundancy

31
NANT - Combined NT unit

service hub
24 Gbps line rate capacity
Supports i.f.o setup/configuration
Up to18 LT cards
Up to 8 ports for Ethernet user links,
subtending links and network links
Up to 12 ports for expansion links
i.f.o available links on NTIO board
contains FLASH, RAM and ROM memory
interfacing with management and
control interfaces via backpanel
traffic management on NT
ACU module integrated on NT

NANT-A
32
NANT-A - Combined NT unit version A

NANT used in: RJ45 BITS (AB variant only)

7302 ISAM FD RJ45 Craft
7330 ISAM FTTN FD
RJ45 Outband Managemen (LOM)
1 Craft interface (RJ45)
RJ45 Uplink 1
1 BITS interface (RJ45)
Availability I.f.o variant
1 100BaseT outband Mgt interface switchable
Not used at the moment
SFP Uplink 1
2 ports for user/network/subtending
links
SFP Uplink 2
1 GE Optical SFP and
1 switchable GE Optical SFP/RJ-45
Flash memory is 512 M

33
NCNC - NT I/O Applique version B

NCNC-B

6 optical GE Eth interfaces

to the active NT board.

serial TAUS interface to the

TAU board.

Environment Monitoring
interface to communicate
with a monitor box over a
RS-232 link.

34
NALT MultiDSL Line Termination Unit

multi-ADSL line card

48 ports per card
ADSL, ADSL2, ADSL2+, READSL and
Annex M
POTS and ISDN line cards
Front access connector on the LT
board.
GE interface towards NT
ATM cell <-> Ethernet packet
conversion
Inter Working Function (IWF)
L2 and L3 cards
difference in supported FW Models,
NALT-B (POTS, L2, 48 ports) QoS,...
NALT-C (POTS, L3, 48 ports)
NALT-D (ISDN, L3, 48 ports)

35
NSLT SHDSL Line Termination unit

SHDSL line card

symmetric service:
bit rate from 192 kbps to 5696
kbps
in steps of 64 kbps
24 ports per card
EFM or ATM/IMA
GE interface towards NT

NSLT-A 24 SHDSL

36
NVLT VDSL(2) Line Termination unit

VDSL line card

24 or 48 ports per card
POTS and ISDN line cards
Support VDSL(2) and ADSL(2+)
GE interface towards NT

NVLT-A 24 VDSL(2) POTS

NVLT-B 24 VDSL(2) ISDN
NVLT-C 48 VDSL(2)-ADSL(2+) POTS
NVLT-D 48 VDSL(2)-ADSL(2+) ISDN

37
 www.alcatel-lucent.com

38