Scribd
Upload
70 views

Manual Spec ZC D11B

This document provides specifications for a C-band LNB called the ZC-D11B, including its input and output frequency ranges, conversion gain, noise temperature, image rejection, local oscillator frequency, phase noise, return loss, spurious output, connectors, power requirements, operating temperature range, and weight.

Uploaded by

tomoyo2009
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Manual Spec ZC D11B

This document provides specifications for a C-band LNB called the ZC-D11B, including its input and output frequency ranges, conversion gain, noise temperature, image rejection, local oscillator frequency, phase noise, return loss, spurious output, connectors, power requirements, operating temperature range, and weight.

Uploaded by

tomoyo2009
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ZINWELL CORPORATION

Specifications
C- BAND LNB : ZC-D11B
1. Input Frequency Range 3.4 ~ 4.2 GHz
2. Output Frequency Range 950 ~ 1750 MHz
3. Conversion Gain 60 dB ( Min. ) 72 dB ( Max. )
4. Gain Variation 6 dB (p-p)
5. Flatness 1dB /36MHz
6. Noise Temperature 30 K ( Max. )
7. Image Rejection 45 dB
8. Output Power
(at 1dB Gain Compression Point) 3 dBm
9. Local Oscillator Frequency 5.15 GHz
10. L.O. Frequency Stability (25 ) 0.5 MHz
(-30 ~ 60 ) 1.5 MHz
11. L.O. Phase Noise ( 1 KHz Offset ) - 70 dBc/Hz
( 10 KHz Offset ) - 90 dBc/Hz
( 100 KHz Offset ) - 105 dBc/Hz
12. Output Return Loss 7.5 dB ( Min. )
13. Output Spurious - 60 dBm ( Max. )
14. Input Waveguide Flange CPR-229G
15. Output Connector 75 F Type ( Female)
16. D.C. Supply Voltage 12 ~ 20 V
17. D.C. Current Consumption 150 mA ( Max. )
18. Operating Temperature - 30 ~ 60
19. Weigth 190 g

Mechanical Drawing

Unit: mm
Specifications are subject to change without notice. Aug. 20, 1999
Revised Date
Initial: Approval:

You might also like